Panasonic of North America FZN1B Multi-band GSM/EDGE/CDMA/WCDMA/LTE Phone with Bluetooth, WLAN and RFID User Manual 1

Panasonic Corporation of North America Multi-band GSM/EDGE/CDMA/WCDMA/LTE Phone with Bluetooth, WLAN and RFID Users Manual 1

Contents

Users Manual 1

Download: Panasonic of North America FZN1B Multi-band GSM/EDGE/CDMA/WCDMA/LTE Phone with Bluetooth, WLAN and RFID User Manual 1
Mirror Download [FCC.gov]Panasonic of North America FZN1B Multi-band GSM/EDGE/CDMA/WCDMA/LTE Phone with Bluetooth, WLAN and RFID User Manual 1
Document ID2993451
Application IDQPuX+Bc7Z+laecVMmrX6sg==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize131.09kB (1638578 bits)
Date Submitted2016-05-17 00:00:00
Date Available2016-11-13 00:00:00
Creation Date2017-12-05 19:27:36
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-05 19:27:36
Document TitleUsers Manual 1
Document CreatorFrameMaker 8.0

Operating Instructions
Smart Handheld
EB-3901
Operating Instructions
Read Me First
Tablet Computer
Model No.
FZ-N1 series
Safety Precautions ..................................................................2
Regulatory Information ......................................................... 10
Trademark and License Information....................................... 27
Accessories ........................................................................... 30
• Refer to the Operating Instructions – Basic Guide by downloading from the URL below
URL:- http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
Thank you for purchasing a Panasonic product.
Please read this document carefully before using the product
and keep this document in a safe place for future reference.
For detailed information about this product, refer to the Reference
Manual, which is available by tapping [Online Manual] in the
product’s app list. (Download required.)
Safety Precautions
To reduce the risk of injury, loss of life, electric shock, fire,
malfunction, and damage to equipment or property, always
observe the following safety precautions.
Explanation of symbol word panels
Explanation of symbol word panels
The following symbol word panels are used to classify and
describe the level of hazard, injury, and property damage caused
when the denotation is disregarded and improper use is
performed.
DANGER
Denotes potential hazards that will result
in serious injury or death.
WARNING
Denotes potential hazards that could
result in serious injury or death.
CAUTION
Denotes potential hazards that could
result in minor injury.
The following symbols are used to classify and describe the type
of instructions to be observed.
This symbol is used to alert users to specific operating
procedures that must not be performed.
This symbol is used to alert users to specific operating
procedures that must be followed in order to operate the
product safely.
This symbol is used to alert users to specific operating
procedures for which special attention is required.
Battery
DANGER
The battery is for use solely with this product. Do
not use it with any other products.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
Charge the battery using the specified method.
Failure to do so may result in electrolyte leakage,
overheating, smoke, rupture, or a fire.
Do not throw the battery into a fire or expose it to
excessive heat.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
Do not disassemble, modify, or insert sharp foreign
objects into the battery.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
Do not short the positive (+) and negative (–)
contacts. Do not carry the battery around or store it
together with necklaces, hairpins, etc.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
Keep the battery away from extreme heat, such as
fire and direct sunlight.
Failure to do so may result in electrolyte leakage,
overheating, smoke, rupture, or a fire.
Do not expose the battery to water or other liquids.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
Safety Precautions
Do not throw the battery or subject it to strong
impact such as dropping or applying high pressure.
Electrolyte leakage, overheating, smoke, rupture, or fire
may result.
• Stop using the product if the battery is subjected to
strong impact or if the battery is noticeably damaged
or deformed.
If the battery deteriorates, replace it with a new one.
Failure to do so may result in electrolyte leakage,
overheating, smoke, rupture, or a fire.
WARNING
Do not directly touch electrolyte that has leaked
from the battery.
Electrolyte may enter the eyes and cause blindness, or
may come into contact with skin or clothing and cause
rashes.
• Flush with clean water without rubbing and seek
medical advice.
Do not place the battery in microwave ovens or
pressurized containers.
Sudden application of heat or pressure may damage the
battery, resulting in electrolyte leakage, overheating,
smoke, rupture, or a fire.
If the battery smells or leaks electrolyte, keep the
battery away from fire.
Failure to do so may result in electrolyte leakage,
overheating, smoke, rupture, or a fire.
This product, charger
WARNING
When using the product for extended periods, do
not expose your skin to the product for a prolonged
period.
Generated heat can cause low-temperature burns.
Do not disassemble, repair, or modify the product.
This may cause the battery to short circuit or overheat,
which may result in a fire or electric shock.
Do not insert foreign objects into the product.
This may cause the battery to short circuit or overheat,
which may result in a fire or electric shock.
Do not allow conductive materials such as metal
objects to touch the expansion bus connector.
This may cause a short circuit and overheating, which
may result in battery electrolyte leakage, overheating,
smoke, rupture, or a fire.
Do not place the product in microwave ovens or
electromagnetic cookers.
Doing so may cause overheating, smoke, or rupture,
which may result in a fire.
Do not touch the product or charger during lightning
storms if the product is connected to a charger.
There is a remote chance of electric shock.
Safety Precautions
Do not turn the volume up too loud when using
headphones, etc.
Listening at high volumes for extended periods may
result in loss of hearing. Also, turn down the volume
before connecting headphones, etc. to prevent sudden
loud sounds.
Keep SD cards and SIM cards out of the reach of
infants and small children.
Small objects are suffocation and choking hazards. In
the event of accidental swallowing, seek medical help
immediately.
Do not operate the product while walking, driving,
riding a bicycle, etc.
Being distracted while engaging in these kinds of
activities can cause accidents or falls.
Do not use headphones, etc. while driving or in
potentially dangerous areas or situations.
Your inability to hear the sounds around you can cause
accidents. Take special care at rail crossings, station
platforms, roads, construction sites, etc.
Use only specified batteries.
Use of unspecified batteries may result in electrolyte
leakage, overheating, smoke, rupture, or a fire.
Immediately stop using the product if any of the
following occurs.
– Product is damaged
– Water or foreign objects enter the product
– Product emits smoke
– Product emits unusual smell or sound
– Product becomes unusually hot
Continuing use may result in fire or electric shock.
Immediately turn the product off, disconnect it from the
power supply, and then remove the battery. Contact your
technical support representative if any malfunction
occurs.
Close the headset jack cover and interface cover
when using the product near water or other liquids,
and in areas with a high concentration of moisture,
steam, dust, oily vapors, etc.
Foreign material that enters the product may cause fire
or electric shock. If foreign material enters the product,
turn the product off, disconnect it from the power supply,
and then remove the battery. Contact your technical
support representative for support or repair.
Stop using the product immediately and consult
your doctor if you feel any discomfort when staring
at flashing lights on the screen.
A very small percentage of individuals may experience
seizures or blackouts when exposed to certain light
patterns or flashing lights for extended periods.
Do not look directly at the laser beam or point the
barcode reader at another person's eyes.
This may damage the eyes.
Safety Precautions
Do not use the product near automatic control
equipment such as automatic doors, fire alarms, etc.
RF signals generated by the product may interfere with
the proper operation of such equipment.
CAUTION
Do not leave the product in areas with a high
concentration of moisture, steam, dust, oily vapors,
etc. for extended periods.
Foreign material that enters the product may cause a fire
or electric shock.
Do not move the product while the charger is
connected.
This may result in a fire or electric shock.
Make sure not to charge the product when it is wet.
This may result in a fire or electric shock.
Do not leave the product in extremely high
temperature environments for an extended period.
Leaving the product where it will be exposed to
extremely high temperatures, such as near fire or in
direct sunlight, may deform the product or cause
damage or malfunction to its internal components. Using
the product in these conditions may cause short circuit,
insulation defects, etc., which may in turn cause a fire or
electric shock.
Do not expose the skin to the product when using
the product in hot or cold environments.
Burns, low-temperature burns, or frostbite may result. If
direct contact with the skin is necessary, perform the
operation as quickly as possible.
Do not place the product on an unstable surface.
The product may drop, resulting in injury.
Do not stack the product.
If balance is lost, the product may fall over or drop,
resulting in an injury.
Do not look directly at the light emitter, or point the
flash or barcode reader at another person's eyes.
This may damage the eyes or cause temporary loss of
eyesight which could result in an accident.
Keep away from magnetic sources such as watches
and magnetic cards.
Failure to do so may cause data corruption or device
malfunction.
For safety purposes, pull the plug when cleaning the
product or if you will not use it for extended periods.
Failure to do so may result in a fire or electric shock.
If the display is damaged, be careful of broken glass
or internal components that may become exposed.
Failure to do so can cause injury.
Take a 10–15 minute break every hour when using
the product.
Using the product continuously for extended periods
may cause strain injuries and may have detrimental
health effects on your eyes, hands, or other parts of your
body.
Safety Precautions
Regulatory Information
This product and your health / Ce produit et votre santĂŠ
This product and your health / Ce produit et
votre santĂŠ
This product, like other radio devices, emits radio frequency
electromagnetic energy. Because this product operates within the
guidelines found in radio frequency safety standards and
recommendations, we believe this product is safe for use by
consumers. These standards and recommendations reflect the
consensus of the scientific community and result from
deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of this product may
be restricted by the proprietor of the building or responsible
representatives of the organization. These situations may for
example include:
• Using this product on board of airplanes, or
• In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment (e.g.
airports), you are encouraged to ask for authorization to use this
product prior to turning on the product.
Ce produit émet, comme d’autres appareils radio, de l’énergie
ĂŠlectromagnĂŠtique Ă  radiofrĂŠquence. Ce produit fonctionne selon
les directives des normes et recommandations de sĂŠcuritĂŠ en
matière de radiofréquences, nous pensons donc qu’il peut être
utilisĂŠ en toute sĂŠcuritĂŠ par les consommateurs. Ces normes et
recommandations sont le reflet du consensus de la communautĂŠ
scientifique et rĂŠsultent de dĂŠlibĂŠrations de panels et de
commissions de scientifiques qui consultent et interprètent en
permanence les nombreux documents de recherche. Dans
10
certaines situations ou dans certains environnements, l’utilisation
du produit peut ĂŞtre limitĂŠe par le propriĂŠtaire des lieux ou par les
représentants responsables de l’entreprise. Ces situations
peuvent inclure :
• l’utilisation du produit en avion ou
• dans tout autre environnement où le risque d’interférences au
niveau d’autres appareils ou services est perçu ou identifié
comme ĂŠtant dangereux.
Si vous n’êtes pas sûr de la politique qui s’applique à l’utilisation
d’appareils sans fil dans une entreprise ou un environnement
spĂŠcifique (aĂŠroports, par exemple), nous vous prions de bien
vouloir demander l’autorisation avant d’allumer le produit.
Information to the user / Avis aux utilisateurs
Information to the user / Avis aux
utilisateurs
We are not responsible for any radio or television interference
caused by unauthorized modification of this product. The
correction of interference caused by such unauthorized
modification will be the responsibility of the user. We and our
authorized resellers or distributors are not liable for damage or
violation of government regulations that may arise from failing to
comply with these guidelines.
Nous ne pouvons ĂŞtre tenus responsables des interfĂŠrences au
niveau de la radio ou de la tĂŠlĂŠvision causĂŠes par des
modifications non autorisĂŠes du produit. La correction des
interfĂŠrences causĂŠes par de telles modifications non autorisĂŠes
relève de la responsabilité de l’utilisateur. Nous et nos
revendeurs et distributeurs agrĂŠĂŠs ne pouvons ĂŞtre tenus
responsables pour les dommages ou les violations de
rĂŠglementations gouvernementales qui peuvent survenir dans le
cadre du non-respect des prĂŠsentes directives.
Regulatory Information
11
Additional safety precautions
Additional safety precautions
Posted facilities
• Turn off the product when in hospitals, health care facilities, or
any facility where posted notices require you to do so.
Hospitals and health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers
• Medical device manufacturers recommend a minimum
separation of 15 cm between a wireless device and an
implanted medical device, such as a pacemaker or implanted
cardioverter defibrillator, to avoid potential interference with the
medical device.
• Persons with pacemakers:
– Should ALWAYS keep this product more than 15 cm from
their pacemaker when this product is turned ON;
– Should use the ear opposite the pacemaker to minimize the
potential for interference;
– Should not carry this product in a breast pocket;
– Should turn off the product immediately if there is any reason
to suspect that interference is taking place.
Hearing aids
• Some digital wireless products may interfere with some hearing
aids. In the event of such interference, consult the
manufacturer of your hearing aid to discuss alternatives.
Other medical devices
• If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able
to assist you in obtaining this information.
12
Aircraft
• Turn off the product after boarding an aircraft, when instructed
by flight staff. Obey instructions from flight staff regarding the
use of the product in flight. Using this product in an aircraft may
be hazardous to the aircraft’s operation and disrupt wireless
communication, and may also be illegal.
Potentially explosive atmosphere
• Turn off the product in areas where a potentially explosive
atmosphere exists and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in injury
or even death.
• Areas with potentially explosive atmosphere may include
fueling areas, chemical plants, below deck on boats, fuel or
chemical transfer or storage facilities, vehicles using petroleum
or natural gas, or areas where the atmosphere contains
particles such as grain, dust, or metallic powders, and any
other area where you would normally be advised to turn off
your vehicle engine.
Electronic devices
• This product receives and transmits radio frequency signals
while switched on. Most electronic equipment is shielded from
RF signals. However, certain electronic equipment may not be
shielded against the RF signals from this product. Therefore,
the use must be restricted in certain situations to avoid
interference.
Driving
• Give full attention to driving. Driving safely is your first
responsibility.
• Pull off the road and park before placing or answering a call. It
is unsafe to operate the product while driving.
• Check the laws and regulations in the areas where you drive,
and always obey them.
Regulatory Information
13
• Only qualified personnel should install the product in a vehicle.
Check regularly that the product is securely mounted in your
vehicle and operating properly.
• Do not place or install the product in the area over the air bag
or in the air bag deployment area. If the air bag inflates, serious
injury and/or damage could result.
• RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Consult the
manufacturer (or its representative) of the vehicle and any
equipment that has been added to the vehicle regarding the
use of mobile products.
• Use hands-free operation, if available and legally permitted.
Emergency communications
• Never rely solely on a mobile product for essential or
emergency communications. Network connections can be
affected by remaining battery level, radio signals, service
networks, and other conditions, and as a result, emergency
communications cannot be guaranteed in all conditions.
Antenna
• Do not replace the antenna. Unauthorized antennas,
modifications, or attachments could damage the product and may
violate regulations.
• Do not touch or cover the antenna area while the product is on.
Call quality, power levels, and the overall performance of the
product may be affected.
Volume
• Do not turn the volume up too loud when using headphones
and earphones.
• Exposure to excessive sound pressure levels for extended
periods may cause hearing damage.
• Being unable to hear sounds in your environment may lead to
accidents.
14
Intended use
Intended use
• This product is not intended for use as, or as part of, nuclear
equipment/systems, air traffic control equipment/systems, aircraft
cockpit equipment/systems*1, medical devices or accessories*2,
life-support systems or other equipment/devices/systems that are
involved with ensuring human life or safety. Panasonic will not be
responsible for any liability resulting from the use of this product
arising out of the foregoing uses.
*1 Aircraft cockpit equipment/systems include Class 2 Electrical
Flight Bag (EFB) Systems and Class 1 EFB Systems when
used during critical phases of flight (e.g., during take-off and
landing) and/or mounted on to the aircraft. Class 1 EFB
Systems and 2 EFB Systems are defined by FAA: AC
(Advisory Circular) 120-76A or JAA: JAA TGL (Temporary
Guidance Leaflets) No.36.
*2 As defined by the European Medical Device Directive (MDD)
93/42/EEC.
• Panasonic cannot guarantee any specifications, technologies,
reliability, safety (e.g., Flammability/Smoke/Toxicity/Radio
Frequency Emission, etc.) requirements related to aviation
standards and medical equipment standards that differ from the
specifications of our COTS (Commercial-Off-The-Shelf) products.
• This product is not intended for use in medical equipment including
life-support systems, air traffic control systems, or other equipment,
devices or systems that are involved with ensuring human life or
safety. Panasonic cannot be held responsible in any way for any
damages or loss resulting from the use of this unit in these types of
equipment, devices or systems, etc. This product has been
designed so as to minimize shock to the LCD, the leakage of liquid
(e.g., water) on to the buttons, etc., but no warranty is provided
against such trouble. Therefore, as a precision instrument, be
extremely careful in the handling of the product.
Regulatory Information
15
For USA
For USA
FCC Part 15 information
This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this product does cause harmful interference to radio or television
reception, which can be determined by turning the product off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC caution
To assure continued FCC emission limit compliance, use only
shielded interface cables when connecting to computer or peripheral
devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate this equipment.
This product complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This product may not cause harmful interference, and
2. This product must accept any interference received, including
interference that may cause undesired operation.
16
FCC RF exposure information
This product meets the government’s requirements for exposure to
radio waves. This product is a radio transmitter and receiver.
This product is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organization through periodic and thorough
evaluation of scientific studies.
The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model.
The highest SAR value for this product can be found under Basic
Guide of
http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
For body-worn operation, this product has been tested and meets
FCC RF exposure guidelines when used with a Panasonic accessory
designated for this product and when used with an accessory that
contains no metal and that positions the mobile device a minimum of
1.0 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this product
with all reported SAR levels evaluated as in compliance with the FCC
RF emission guidelines.
SAR information on this product is on file with the FCC and can be
found by searching for the product’s FCC ID number at
http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for
your product, first remove the battery pack. The FCC ID number
is printed on the nameplate underneath.
Regulatory Information
17
Wi-FiÂŽ use
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and/or damage this product.
Using hearing aids with mobile devices
When some wireless mobile devices are used near some hearing
devices (hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and mobile devices
also vary in the amount of interference they generate. In the event of
interference you may want to consult your hearing aid supplier to
discuss solutions.
The wireless telephone industry has developed ratings for some of
their mobile devices, to assist hearing device users in finding mobile
devices that may be compatible with their hearing devices. Not all
mobile devices have been rated. Mobile devices that are rated have
the rating on their box or label located on the box.
The ratings are not guarantees. Results will vary depending on the
user’s hearing device and hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated
mobile device successfully. Trying out the mobile device with your
hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Mobile devices rated M3 or M4 are likely to generate less
interference to hearing devices than mobile devices that are not
labeled. M4 is the better/higher of the two ratings.
T-Ratings: Mobile devices rated T3 or T4 are likely to be more usable
with a hearing device’s telecoil (“T-Coil Switch” or “Telephone Switch”)
than unrated mobile devices. T4 is the better/higher of the two ratings.
(Note that the hearing aid telecoil must be activated in order for it to
function, and that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to
experience interference noise from mobile devices.
18
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Hearing aid compatibility
This mobile device has been tested and rated for use with hearing
aids for some of the wireless technologies that it uses. However,
there may be some newer wireless technologies used in this mobile
device that have not been tested yet for use with hearing aids. It is
important to try the different features of this mobile device thoroughly
and in different locations, using your hearing aid or cochlear implant,
to determine if you hear any interfering noise. Consult your service
provider or the manufacturer of this mobile device for information on
hearing aid compatibility. If you have questions about return or
exchange policies, consult your service provider or mobile retailer.
Responsible party
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102, USA
Support contact:
http://business.panasonic.com/support-computerstablets
Disposal
USA Only: Disposal may be regulated in your community due to
environmental considerations.
For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-769-0149.
TTY information
For hearing or speech impaired TTY users, call 1-877-833-8855
using a TTY device.
Regulatory Information
19
For Canada / Pour le Canada
For Canada / Pour le Canada
Industry Canada
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Industrie Canada
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisĂŠe aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Wi-Fi use
This product (local network devices) for the band 5150- 5250
MHz is only indoor usage to reduce potential for harmful
interference to cochannel Mobile Satellite systems. High power
radars are allocated as primary users (meaning they have
priority) of 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN (licenceexempt local area network) devices.
Utilisation Wi-Fi
Ce produit (appareils pour rĂŠseaux locaux) pour les bandes de
frĂŠquences 5 150-5 250 MHz est rĂŠservĂŠ Ă  une utilisation Ă 
l’intérieur afin de réduire le risque d’interférence avec les
systèmes satellites mobiles utilisant les mêmes canaux. Les
radars forte puissance sont dĂŠsignĂŠs comme ĂŠtant les premiers
utilisateurs (c’est-à-dire qu’ils ont la priorité) des bandes de
20
frĂŠquences 5 250-5 350 MHz et 5 650-5 850 MHz. Ces radars
peuvent provoquer des interfĂŠrences et/ou des dommages aux
dispositifs LAN-EL (rĂŠseaux locaux exempts de licence).
RF exposure information
This product complies with Industry Canada radiation exposure
limits set forth for an uncontrolled environment. This product is a
radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by Industry Canada. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health. The exposure standard for wireless handsets
employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by Industry Canada is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the
ear and worn on the body) as required by Industry Canada for
each model.
The highest SAR value for this product can be found under Basic
Guide of
http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
For body-worn operation, this product has been tested and meets
the RF exposure guidelines when used with a Panasonic
accessory designated for this product and when used with an
accessory that contains no metal and that positions the mobile
device a minimum of 1.0 cm from the body. Use of other
accessories may not ensure compliance with the RF exposure
guidelines.
Information sur l’exposition aux radiofréquences (RF)
Ce produit est conforme aux limites d’exposition d’Industrie
Canada ĂŠtablies pour un environnement non contrĂ´lĂŠ. Ce produit
est un Êmetteur-rÊcepteur radio. Il a ÊtÊ conçu et fabriquÊ de
Regulatory Information
21
façon à ne pas dépasser les limites d’émission établies par
Industrie Canada pour l’exposition à l’énergie des
radiofrĂŠquences (RF).
Ces directives sont fondĂŠes sur des normes ĂŠlaborĂŠes par des
organisations scientifiques indépendantes au moyen d’une
évaluation périodique et rigoureuse d’études scientifiques. Ces
normes comprennent une marge de sÊcuritÊ substantielle conçue
pour assurer la sĂŠcuritĂŠ de toutes les personnes, quel que soit
leur âge ou leur état de santé. La norme d’exposition pour les
combinĂŠs sans fil utilise une unitĂŠ de mesure appelĂŠe dĂŠbit
d’absorption spécifique ou DAS. La limite DAS fixée par Industrie
Canada est de 1,6 W/kg. Les essais portant sur le DAS sont
effectuĂŠs en utilisant les positions et les emplacements
d’utilisation (par ex. au niveau de l’oreille et porté au niveau du
corps) spÊcifiÊs par Industrie Canada pour chaque modèle.
Les valeurs de DAS les plus ĂŠlevĂŠes obtenues pour ce produit se
trouvent dans le Guide de base à l’adresse
http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
Pour l’utilisation lorsque l’appareil est porté sur soi, ce produit a
été testé et déclaré conforme aux directives d’exposition aux
radiofréquences (RF) dans le cas d’une utilisation avec un
accessoire Panasonic conçu pour ce produit et dans le cas d’une
utilisation avec un accessoire ne contenant pas de mĂŠtal et qui
maintient l’appareil mobile à une distance d’au moins 1,0 cm du
corps. En cas d’utilisation avec d’autres accessoires, il est
possible que la conformité aux directives d’exposition aux
radiofrĂŠquences (RF) ne soit pas assurĂŠe.
22
General information / Informations gĂŠnĂŠrales
General information / Informations
gĂŠnĂŠrales
CAUTION / ATTENTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Il y a risque d’explosion si la batterie est remplacée par une batterie
de type incorrect.
Mettre au rebut les batteries usagĂŠes conformĂŠment aux instructions.
Recycle information
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
L’appareil que vous vous êtes procuré est
alimentĂŠ par une batterie au lithium-ion.
Pour des renseignements sur le recyclage
de la batterie, veuillez composer le
1-800-8-BATTERY.
Laser device caution / Mise en garde concernant les appareils laser
Laser device caution / Mise en garde
concernant les appareils laser
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Regulatory Information
23
This product is using lasers that comply with DHHS RULE 21 CFR
CHAPTER I, SUBCHAPTER J and IEC60825-1:2007 regulations.
This product utilizes a “Class 2” laser.
Class 2 laser readers use a low power, visible diode. As with any
very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.
Caution: Procedures other than those specified herein may result in
hazardous radiation exposure.
ATTENTION !
CE PRODUIT UTILISE UN LASER.
L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU
L’EXÉCUTION DE PROCÉDURES AUTRES QUE CEUX
INDIQUÉS ICI PEUT ENTRAÎNER L’EXPOSITION À DES
RADIATIONS DANGEREUSES.
N’OUVREZ PAS LES CACHES ET NE PROCÉDEZ PAS AUX
RÉPARATIONS VOUS-MÊME.
CONFIEZ L’ENTRETIEN À DU PERSONNEL QUALIFIÉ.
Ce produit utilise des lasers conformes aux rĂŠglementations
IEC60825-1:2007.
Ce produit utilise un laser de classe 2.
Les lecteurs laser de classe 2 utilisent une diode visible de faible
puissance. Comme avec toute source de lumière très vive, telle que
le soleil, l’utilisateur doit éviter de regarder directement le faisceau
lumineux. L’exposition momentanée à un laser de classe 2 n’est pas
connue comme ĂŠtant dangereuse.
Attention : les procĂŠdures autres que celles indiquĂŠes ici peuvent
entraîner l’exposition à des radiations dangereuses.
24
Labeling and device location / Étiquetage et emplacement de
l’appareil
(The product illustration is shown with the included Battery Pack
installed. / Le produit est illustrĂŠ avec la batterie fournie installĂŠe.)
Barcode reader /
Lecteur de
codes Ă  barres
When the included Battery Pack (FZ-VZSUN110U) is installed:
Quand la batterie fournie (FZ-VZSUN110U) est installĂŠe :
When the optional Extended life Battery Pack (FZ-VZSUN120U)
is installed:
Quand la batterie Ă  autonomie prolongĂŠe optionnelle
(FZ-VZSUN120U) est installĂŠe :
Regulatory Information
25
Laser radiation information
• Wavelength: 630-680 nm
• Pulse duration: approx. 10 msec
• Repetition rate: approx. 1000/18 Hz
• Maximum power: 1 mW max
• Aiming pattern angle: 48.0° horizontal, 38.0° vertical
Informations sur les rayonnements laser
• Longueur d’onde : 630-680 nm
• Durée d’impulsion : environ 10 ms
• Fréquence de répétition : environ 1000/18 Hz
• Puissance max. : 1 mW max
• Angle de visée : 48,0° horizontal, 38,0° vertical
26
Trademark and License Information
Trademarks
• The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc., and any use of such marks by
Panasonic Corporation is under license.
• microSDXC Logo is a trademark of SD-3C, LLC.
• The N Mark is a trademark or registered trademark of NFC Forum,
Inc. in the United States and in other countries.
• Android is a trademark of Google, Inc.
• Wi-Fi®, the Wi-Fi logo, the Wi-Fi CERTIFIED logo and Wi-Fi
CERTIFIED are trademarks or registered trademarks of Wi-Fi
AllianceÂŽ.
• All other trademarks identified herein are the property of their
respective owners.
License information
• This product is licensed under the MPEG-4 patent portfolio
license and AVC patent portfolio license for the personal use of
a consumer or other uses in which it does not receive
remuneration to (i) encode video in compliance with the
MPEG-4 Visual Standard and AVC Standard (“MPEG-4/AVC
Video”) and/or (ii) decode MPEG-4/AVC Video that was
encoded by a consumer engaged in a personal activity and/or
was obtained from a video provider licensed to provide MPEG4/AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG
LA, LLC. See http://www.mpegla.com.
• This product contains software licensed in compliance with
GNU General Public License Version 2.0 (GPL v2.0), GNU
Lesser General Public License (LGPL) or any other license.
Trademark and License Information
27
•
•
•
•
The program is free software; you can copy it, redistribute it,
and modify it under the terms of the GPL v2.0, LGPL or any
other license.
At least three (3) years from delivery of products, Panasonic
System Networks Co., Ltd. will give to any third party who
contacts us at the contact information provided below, for a
charge no more than our cost of physically performing source
code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2.0 and LGPL
or any other license.
Contact Information
oss-cd-request@gg.jp.panasonic.com
Source code is also freely available to the public via the web
site listed below.
http://panasonic.net/avc/oss/index.html
Please note that we cannot respond to any inquiries regarding
the source code.
For more details on the relevant software (including license
information of GPL v2.0 and LGPL), refer to the information
displayed on the following screen: home screen →
→
[Settings] → [About tablet] → [Legal information].
This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/source/license.html)
This product includes the Independent JPEG Group's software.
This software is based in part on the work of the Independent
JPEG Group.
This product includes the software distributed under the terms
of The FreeType Project License. This software is based in part
of the work of the FreeType Team.
This product includes the following software; ICU 1.8.1 and
later Copyright (c) 1995-2011 International Business Machines
Corporation and others.
28
• This product includes other free software or open source
software.
• For more details on the relevant software (including license
information), refer to the information displayed on the following
screen: home screen →
→ [Settings] → [About tablet] →
[Legal information].
• TouchSense® Technology licensed from Immersion
Corporation. TouchSense and other Immersion software
contained herein are protected under one or more of the U.S.
Patents found at the following address
www.immersion.com/patent-marking.html and other patents
pending.
Trademark and License Information
29
Accessories
Product name
Model number
AC Adaptor
CF-AA6373A
Battery Pack
FZ-VZSUN110U
FZ-VZSUN120U
Cradle
FZ-VEBN111
Charging Cup
FZ-VCBN11U
Holster
FZ-VSTN12U
Hand Strap
FZ-VSTN11U
30
Accessories
31
Two Riverfront Plaza, Newark, NJ 07102, USA
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
Š Panasonic System Networks Co., Ltd. 2016
&*3:<#,
*DHQX1149ZA/J1*
DHQX1149ZA/J1
C0216-0
Printed in Japan

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2016:02:12 13:34:43Z
Modify Date                     : 2016:05:17 08:52:53-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 8.0
Metadata Date                   : 2016:05:17 08:52:53-04:00
Format                          : application/pdf
Title                           : 
Creator                         : 
Document ID                     : uuid:aea2fbc6-4c7b-44bc-8da3-30f466de381d
Instance ID                     : uuid:33612e2e-1bb4-42a0-aee4-20769f1e2e0d
Page Mode                       : UseOutlines
Page Count                      : 32
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ACJFZN1B

Navigation menu