Panasonic Hx Dc2 Owners Manual

HX-WA20 - Owner’s Manual HXWA20-MUL Free User Guide for Panasonic Camcorder, Manual - page2

2015-08-19

: Panasonic Panasonic-Hx-Dc2-Owners-Manual-791846 panasonic-hx-dc2-owners-manual-791846 panasonic pdf

Open the PDF directly: View PDF PDF.
Page Count: 224 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Preparation
Basic
Advanced
(Recording)
Advanced
(Playback)
Copy/
Dubbing
With a PC
Others
Owners Manual
Dual Camera
Model No. HX-WA20
HX-WA2
HX-DC2
Before connecting, operating or adjusting this product, please read
the instructions completely.
until
2012/3/8
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT4F46
1AG6P1P6499--(S)
HX-WA20PPPCPU-VQT4F46_mst.book 1 ページ 2012年2月14日 火曜日 午後5時10分
2 VQT4F46
Safety Precautions
Dear Customer,
Thank you for choosing
Panasonic!
You have purchased one of the
most sophisticated and reliable
products on the market today.
Used properly, we’re sure it will
bring you and your family years of
enjoyment. Please take time to fill
in the information on the right.
The serial number is on the tag
located on the inner side of the
rear door ( / )
or the battery holder
( ) of your camera. Be
sure to retain this manual as
your convenient camera
information source.
/
WARNING:
To reduce the risk of fire, electric shock or product damage,
Do not let water or other liquids drip or splash inside the unit.
Do not expose accessories (battery pack, AC adaptor, SD memory
card and etc.) to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on accessories.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service personnel.
WARNING:
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Do not place objects filled with liquids, such as vases, on this unit.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service personnel.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 2 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 3
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Do not place sources of naked flames, such as lighted candles, on this unit.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cables with ferrite core when connecting to computer or
peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: HX-WA20/HX-WA2/HX-DC2
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
HX-WA20PPPCPU-VQT4F46_mst.book 3 ページ 2012年2月14日 火曜日 午後5時10分
4 VQT4F46
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.
THE FOLLOWING APPLIES ONLY IN CANADA.
Concerning the battery
The socket outlet shall be installed near the equipment and shall be
easily accessible.
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
In the U.S.A. and Canada, the AC adaptor must be connected to a
120 V AC power supply only.
When connecting to an AC supply outside of the U.S.A. or Canada,
use a plug adaptor to suit the AC outlet configuration.
This Class B digital apparatus complies with Canadian ICES-003.
Battery pack (Lithium ion battery pack)
Use the specified unit to recharge the battery pack.
Do not use the battery pack with equipment other than the specified
unit.
Do not get dirt, sand, liquids, or other foreign matter on the terminals.
Do not touch the plug terminals (i and j) with metal objects.
Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes,
wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the
eyes. Rinse eyes thoroughly with water, and then consult a doctor.
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 4 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 5
Product Identification Marking
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 oC (140 oF) or incinerate.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
Product Location
Dual Camera /
Inner side of LCD monitor
Battery holder
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 5 ページ 2012年2月14日 火曜日 午後5時10分
6 VQT4F46
Precautions
USE & LOCATION
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED
BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE
THE SD CARD.
DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT
OBJECTS
DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH
TEMPERATURE ... Such as, in direct sunlight, inside a closed car,
next to a heater, etc... This action could permanently damage the
internal parts of your camera.
AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is
suddenly moved from a cold place to a warm place, moisture may form
on the SD card and inside the unit.
DO NOT LEAVE YOUR CAMERA OR THE POWER SUPPLY
TURNED ON WHEN NOT IN USE.
STORAGE OF YOUR CAMERA ... Store and handle your camera in a
manner that will not subject it to unnecessary movement (avoid
shaking and striking). Your camera contains a sensitive pick-up device
which could be damaged by improper handling or storage.
CARE
TO CLEAN YOUR CAMERA ... Do not use strong or abrasive
detergents when cleaning your camera body.
TO PROTECT THE LENS
... Do not touch the surface of the lens with
your hand. Use a commercial camera lens solution and lens paper when
cleaning the lens. Improper cleaning can scratch the lens coating.
TO PROTECT THE FINISH OF YOUR CAMERA ... Before handling
your camera, make sure your hands and face are free from any
chemical products, such as suntan lotion, as it may damage the finish.
WARNING
CAUTION
HX-WA20PPPCPU-VQT4F46_mst.book 6 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 7
-If you see this symbol-
About recording formats and compatibility of the unit
The unit is an MP4 format (MPEG-4 AVC file standard) Dual Camera
for recording high-definition motion pictures.
AVCHD and MPEG2 motion pictures are different formats, and are not
therefore supported by the unit.
Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or
indirectly due to any type of problems that result in loss of recording or
edited content, and does not guarantee any content if recording or editing
does not work properly. Likewise, the above also applies in a case where
any type of repair is made to the unit (including any other non-built-in
memory related component).
Handling of built-in memory
This unit is equipped with the built-in memory. When using this
component, pay attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In order to avoid erasing data
due to static electricity, electromagnetic waves, breakage, and failures,
back up the data to a PC or disc. (l145)
The status indicator (l24, 29) illuminates in red while the SD card or
built-in memory is being accessed (initialization, recording, playback,
deleting etc.). Do not perform the following operations when the
indicator illuminates. It may damage the built-in memory or cause a
malfunction in the unit.
jTurn the unit off (remove the battery)
jInsert and remove the SD Card
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
About disposing of or giving away this unit. (l184)
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.
HX-WA20PPPCPU-VQT4F46_mst.book 7 ページ 2012年2月14日 火曜日 午後5時10分
8 VQT4F46
Cards that you can use with this unit
SD Memory Card, SDHC Memory Card and SDXC Memory Card
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
Refer to page 39 for more details on SD cards.
For the purposes of this owner’s manual
SD Memory Card, SDHC Memory Card and SDXC Memory Card are
referred to as the “SD card”.
Functions that can be used for motion picture recording/motion picture
playback are indicated by in this owner’s manual.
Functions that can be used for still picture recording/still picture
playback are indicated by in this owner’s manual.
Functions that can be used for audio recording/audio playback are
indicated by in this owner’s manual.
Pages for reference are indicated by an arrow, for example: l00
“File” is used to mean “scene”, “still picture” and “audio file”.
This owner’s manual is designed for use with models ,
and . Pictures may be slightly different from the original.
The illustrations used in this owner’s manual show model ,
however, parts of the explanation refer to different models.
Depending on the model, some functions are not available.
Features may vary, so please read carefully.
Not all models may be available depending on the region of purchase.
HX-WA20
HX-WA2
HX-DC2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 8 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 9
Preparation
(Important)
About the Waterproof and Dustproof Performance of this unit
[HX-WA20]/[HX-WA2] ....................................................................... 13
Check before using underwater .................................................. 15
Using this unit underwater........................................................... 18
Caring for this unit after using it underwater ............................... 18
Accessories...................................................................................... 22
Names and Functions of Main Parts.............................................. 24
HX-WA20/HX-WA2 ..................................................................... 24
HX-DC2....................................................................................... 27
Power supply.................................................................................... 30
Inserting/removing the battery..................................................... 30
Charging the battery ................................................................... 34
Charging and recording time....................................................... 36
Recording to a card ......................................................................... 39
Cards that you can use with this unit .......................................... 39
Inserting/removing an SD card.................................................... 40
Turning the unit on/off..................................................................... 44
About standby mode ................................................................... 44
About economy function ............................................................. 45
About the high temperature warning icon ................................... 46
Selecting a mode ............................................................................. 47
Setting date and time....................................................................... 48
Basic
Before recording.............................................................................. 50
Recording motion pictures ............................................................. 52
Recording still pictures................................................................... 55
About recording still pictures during motion picture recording
and audio recording .................................................................... 58
Recording audio............................................................................... 59
Intelligent Auto Mode ...................................................................... 61
Contents
HX-WA20PPPCPU-VQT4F46_mst.book 9 ページ 2012年2月14日 火曜日 午後5時10分
10 VQT4F46
Motion picture/Still picture/Audio playback.................................. 64
Using the menu screen ................................................................... 68
Using Option Menu.......................................................................... 70
OPTION MENU 1........................................................................ 70
OPTION MENU 2........................................................................ 71
OPTION MENU 3........................................................................ 73
Advanced (Recording)
Using the zoom ................................................................................ 76
Double range zoom [HX-WA2]/[HX-DC2] ................................... 77
Zoom mode................................................................................. 78
Image stabilizer ................................................................................ 80
Recording in Slow Motion Mode [HX-WA20]................................. 81
Burst recording................................................................................ 83
Recording panorama still pictures................................................. 85
Recording underwater [HX-WA20]/[HX-WA2]................................ 88
Record with color balance and audio that are suitable
for recording underwater............................................................. 88
Recording functions of menus....................................................... 89
RECORDING MENU 1................................................................ 89
RECORDING MENU 2................................................................ 96
RECORDING MENU 3.............................................................. 100
RECORDING MENU 4.............................................................. 107
Manual recording ........................................................................... 108
White Balance........................................................................... 108
Manual shutter speed/iris adjustment [HX-WA20] .................... 110
Setting the focus and recording ................................................ 112
Advanced (Playback)
Playback Operations ..................................................................... 113
Playback using operation icon .................................................. 113
Creating still picture from motion picture................................... 115
Cutting out a section of a panorama still picture ....................... 116
Zooming in on a still picture during playback
(Playback zoom) ....................................................................... 117
HX-WA20PPPCPU-VQT4F46_mst.book 10 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 11
Various playback functions .......................................................... 118
Changing the playback settings and playing back
the slide show ........................................................................... 118
Displaying file information ......................................................... 120
Using the playback menu.............................................................. 122
PLAYBACK MENU 1................................................................. 122
PLAYBACK MENU 2................................................................. 124
Deleting scenes/still pictures/audio files..................................... 128
Protecting a file ......................................................................... 131
Watching Video/Pictures on your TV ........................................... 132
Connecting with an HDMI micro cable/HDMI mini cable........... 137
TV format setting....................................................................... 137
Playback using VIERA Link....................................................... 138
Copy/Dubbing
Copying from Built-in Memory to SD card .................................. 142
Dubbing images onto other video devices.................................. 143
With a PC
What you can do with a PC........................................................... 145
End User License Agreement ................................................... 148
Operating environment ................................................................. 150
Installation ...................................................................................... 154
Connecting to a PC........................................................................ 155
Use as a card reader ................................................................ 156
Using the unit as a web camera................................................ 159
Starting HD Writer VE 2.0 .............................................................. 161
Reading the operating instructions of the software applications..... 161
If using Mac .................................................................................... 162
Uploading files to a web service .................................................. 163
Using the Eye-Fi transfer feature .............................................. 166
Others
LCD Display Indications................................................................ 169
Messages........................................................................................ 173
HX-WA20PPPCPU-VQT4F46_mst.book 11 ページ 2012年2月14日 火曜日 午後5時10分
12 VQT4F46
Troubleshooting............................................................................. 173
Cautions for use............................................................................. 182
About copyright ............................................................................. 189
Recording modes/approximate recordable time ........................ 191
Approximate number of recordable pictures .............................. 193
Specifications................................................................................. 196
Optional accessories..................................................................... 203
Accessory Order Form
(For USA and Puerto Rico Customers)..................................... 205
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)........ 206
Warranty (For Canadian Customers) ........................................... 208
Useful Information (Only For Latin American Countries) .......... 209
Index ............................................................................................... 210
Spanish Quick Use Guide/Guía española para el uso rápido.... 212
HX-WA20PPPCPU-VQT4F46_mst.book 12 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 13
This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
* This means that this unit can be used underwater for specified time in
specified pressure in accordance with the handling method established
by Panasonic.
Handling of this unit
Preparation
(Important)
About the Waterproof and
Dustproof Performance of this unit
[HX-WA20]/[HX-WA2]
Waterproof/Dustproof Performance
This unit’s waterproof/dustproof rating complies with the
“IP58” rating. Provided the care and maintenance guidelines
described in this document are strictly followed, this unit can
operate underwater, to a depth not exceeding 3 m (10 feet) for
a time not exceeding 60 minutes. *
Waterproof Performance
This unit’s waterproof rating complies with the “IPX8” rating.
Provided the care and maintenance guidelines described in
this document are strictly followed, this unit can operate
underwater, to a depth not exceeding 3 m (10 feet) for a time
not exceeding 60 minutes. *
Waterproofing is not guaranteed if the unit is subject to an impact as a
result of being hit or dropped etc. If an impact to this unit occurs, it
should be inspected (subject to a fee) by a Panasonics Service Center
to verify that the waterproofing is still effective.
The waterproof performance may be degraded due to the strong water
pressure when this unit is used deeper than 3 m (10 feet) underwater.
When this unit is splashed with detergent, soap, hot spring, bath
additive, sun oil, sun screen, chemical, etc., wipe it off immediately.
Waterproof function of this unit is for sea water and fresh water only.
Any malfunction caused by customer misuse, or mishandling will not
be covered by the warranty.
The inside of this unit is not waterproof. Water leakage will cause
malfunction.
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 13 ページ 2012年2月14日 火曜日 午後5時10分
14 VQT4F46
Foreign objects may adhere to the inner side of the rear door
(around the rubber seal or connecting terminals) when the rear
door is opened or closed in places with sand or dust etc. This
may result in the impairment of the waterproof performance if the
rear door is closed with foreign objects adhered. Be extremely
careful since it may result in malfunction etc.
If any foreign object has adhered to the inner side of the rear door,
remove with the supplied brush.
If any liquid such as water droplets has adhered to this unit or
inner side of the rear door, wipe off with a soft dry cloth. Do not
open or close the rear door near the water, when underwater,
using wet hands, or when this unit is wet. It may cause water
leakage.
When inner side of the lens is fogged (condensation)
It is not a malfunction or failure of this unit. It may be caused by the
environment in which this unit is used.
Be careful of condensation since it causes lens stains, fungus and unit
malfunction.
What to do when inner side of the lens is fogged
Turn off the unit and open the rear door in a place with constant
ambient temperature, away from high temperatures, humidity, sand
and dust. The fog will disappear naturally in about 2 hours with the rear
door open when the temperature of this unit gets close to the ambient
temperature.
Contact Panasonic’s Service Center if the fogging does not disappear.
Conditions in which inner side of the lens may be fogged
Condensation may occur and the inner side of the lens may be fogged
when this unit is used in areas that undergo a significant change in
temperature or in high humidity, such as the following:
When this unit is used underwater suddenly after being on a hot
beach etc.
When this unit is moved to a warm area from a cold area, such as
at a ski resort or at high altitude
When the rear door is opened in a high-humidity environment
Supplied accessories such as battery pack etc. are not waterproof.
(excluding handstrap)
Cards are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card into this unit.
Do not leave this unit for a long period of time in places where
temperature is very low (at ski resorts or at high altitude etc.) or very
high [above 35 oC (95 oF)], inside a car under strong sunlight, close to a
heater, on the beach, etc. Waterproof performance may be degraded.
HX-WA20PPPCPU-VQT4F46_mst.book 14 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 15
1Open the rear door.
2Check that there are no foreign objects on the inner
side of the rear door.
If there are any foreign objects, such as lint, hair, sand, etc., on the
surrounding area, water will leak within a few seconds causing
malfunction.
3If there is foreign matter adhering to the unit, use the
supplied brush to remove it.
Be extremely careful to remove any sand etc. that may adhere to the
sides and corners of the rubber seal.
Keep the brush out of reach of children to prevent swallowing.
Check before using underwater
Do not open or close the rear door in places with sand and dust,
close to water, or with wet hands. Sand or dust adhering may
cause water leaks.
1Unlock the LOCK lever.
2Slide the open/close lever.
3Open the rear door.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 15 ページ 2012年2月14日 火曜日 午後5時10分
16 VQT4F46
Use the brush end with the short (hard) bristles to remove larger
foreign matter or damp sand from the unit.
ABrush (supplied)
Wipe it off with a dry soft cloth if there is any
liquid. It may cause water leaks and
malfunction if you use this unit with liquid
adhered.
4Check for cracks and deformation of the rubber seal
on the rear door.
The integrity of the rubber seals may decrease after about 1 year, with
use and age. To avoid permanently damaging this unit the seals should
be replaced once each year. Please contact Panasonic’s Service
Center for related costs and other information.
HX-WA20PPPCPU-VQT4F46_mst.book 16 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 17
5Close the rear door securely.
Lock securely to the points where the red portion of the open/close
lever and LOCK lever are no longer visible.
To prevent water seeping into this unit, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
About handling the brush
Before use, check that foreign matter has not adhered to the brush.
After use, remove any adhered foreign matter and clean in preparation
for next use.
1Close the rear door.
2Slide the open/close lever.
3Lock the LOCK lever.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 17 ページ 2012年2月14日 火曜日 午後5時10分
18 VQT4F46
Using this unit underwater
Use this unit underwater at a depth of down to 3 m (10 feet) with the
water temperature between 0 oC and 35 oC (32 oF and 95 oF).
Do not use this unit at a depth of over 3 m (10 feet).
Do not use it in hot water over 35
o
C (
95 o
F) (in a bath or a hot spring).
Do not use this unit underwater not longer than 60 minutes
continuously.
Do not open or close the rear door.
Do not apply shock to this unit underwater. (Waterproof performance
may not be maintained, and there is a chance of water leak.)
Do not dive into the water holding this unit. Do not use this unit in a
location where the water will splash strongly, such as rapid flow or
waterfall. (Strong water pressure may be applied, and it may cause
malfunction.)
This unit will sink in the water. Take care not to drop this unit and lose it
underwater by securely placing the strap around your wrist or similar
measure.
Attaching a tripod with a 5.5 mm (0.22 q) screw or larger may open a
hole in this unit through which water will leak.
Caring for this unit after using it underwater
Do not open or close the rear door until the sand and dust is
removed by rinsing this unit with water.
Make sure to clean this unit after using it.
Thoroughly wipe off any water droplets, sand, and saline matter on
your hands, body, hair, etc.
It is recommended to clean this unit indoors, avoiding places where
water spray or sand may fall.
Do not leave this unit uncared for longer than 60 minutes after
using it underwater.
Leaving this unit with foreign objects or saline matter on it may
cause damage, discoloration, corrosion, unusual odour, or
deterioration of the waterproof performance.
HX-WA20PPPCPU-VQT4F46_mst.book 18 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 19
1Rinse with water with the rear door closed.
After use at the seaside or underwater, soak the unit in fresh water
pooled in a shallow container for 10 minutes or less.
2Drain water by holding this unit upside down and
shaking it lightly a few times.
After using this unit at the seaside or underwater, or after washing it,
water will remain at the speaker site of this unit for a while and it may
cause lower sound or sound distortion.
Fasten the strap firmly to prevent this unit from dropping.
3Wipe off water drops on this unit with a dry soft cloth
and dry this unit in a shaded area which is well
ventilated.
Dry this unit by standing it on a dry cloth.
SD CARD/
BATTERY
LOCK
HX-WA20PPPCPU-VQT4F46_mst.book 19 ページ 2012年2月14日 火曜日 午後5時10分
20 VQT4F46
Do not dry this unit with hot air from dryer or similar. It will deteriorate
the waterproof performance or cause failure due to deformation.
Do not use chemicals such as benzine, thinner, alcohol, or cleanser, or
soap or detergents.
4Confirm that there are no water droplets, open the
rear door, and wipe off any water droplets or sand left
inside using a soft dry cloth.
Water droplets may adhere to the card when the rear door is opened
without thoroughly drying. Also, water may accumulate in the gap
around the card compartment, the battery compartment or the terminal
connector. Be sure to wipe any water off with a soft dry cloth.
The water droplets may seep into this unit when the rear door is closed
while it is still wet, causing condensation or failure.
Wiping moisture from the unit
If there is moisture inside the rear door, wipe every crevice completely
clear of moisture.
(This moisture is not due to exposure to water)
AMoisture here
About the water draining design
This unit is designed so that water that entered the gaps around the
zoom button etc. drains out. For this reason, bubbles may appear when
the unit is immersed in water, but this is not a malfunction.
Draining water from the unit
Drainage holes are found on the bottom of the unit. Hold the unit
vertically, as shown, to drain off the water.
HX-WA20PPPCPU-VQT4F46_mst.book 20 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 21
When draining, attach the hand strap to the unit and secure the hand
strap to your wrist to prevent the unit from dropping.
BDrainage holes
HX-WA20PPPCPU-VQT4F46_mst.book 21 ページ 2012年2月14日 火曜日 午後5時10分
22 VQT4F46
Preparation
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Feb. 2012. These may be subject to
change.
Battery pack
/
VW-VBX090
VW-VBX070
AC adaptor
VSK0750
AV cable/
VFA0555
VFA0543
USB cable
VFA0554
Lens cap
VFC4701
Lens cap strap
VFC4702
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 22 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 23
Handstrap
/
VFC4817
VFC4627
To prevent the unit from dropping, be sure
to attach the handstrap. (l26, 28)
/
Brush
VYC1064
CD-ROM
Software
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 23 ページ 2012年2月14日 火曜日 午後5時10分
24 VQT4F46
HX-WA20/HX-WA2
1 LCD monitor (l51)
It can open up to 90o A, rotate up to 180o B towards the lens or 105o
C towards the opposite direction.
2 Power button [ ] (l44)
3 Status indicator (l7, 34, 40, 186)
4 Open/close lever [SD CARD/BATTERY] (l30, 40)
5 Lock lever [LOCK] (l30, 40)
6 Menu button [MENU] (l68)
7 REC/ button [REC/ ] (l47)
8 Intelligent auto button [ ] (l61)
Preparation
Names and Functions of Main Parts
Due to limitations in LCD production technology, there may be some
tiny bright or dark spots on the LCD monitor screen. However, this is
not a malfunction and does not affect the recorded picture.
12
8
3
7
6
4
5
HX-WA20PPPCPU-VQT4F46_mst.book 24 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 25
9Slow motion mode button [ ] (l81)
Zoom range button [ ] (l77)
10 Photoshot button [ ] (l55)
11 SET button [SET] (l64, 68, 103, 113)
Use the SET button to select the recording functions and playback
operations, and to operate the menu screen.
12 In Recording Mode: Zoom button [W/T] (l76)
In Playback Mode: Volume button (l66, 119)
Zoom button [W/T] (l117)
Thumbnail display switch [ / ] (l66)
13 Recording start/stop button [ ] (l52)
14 Rear door (l30, 40)
15 Card slot
16 Battery holder
17 HDMI micro connector (l132, 139)
18 USB/AV connector (l132, 143, 155)
Use the USB cable/AV cable (only the supplied cable).
In this owner’s manual, the SET button is denoted as shown below.
Example:
or Select using the SET button
9
10
11
12
18
17
16
15
14
13
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 25 ページ 2012年2月14日 火曜日 午後5時10分
26 VQT4F46
19 Lens
20 Built-in flash (l96)
The flash reaches high temperatures and may cause burns if touched.
Please do not touch the flash.
21 Hand strap fixture
Adjust the length after passing your arm through the hand strap.
22 Speaker
23 Internal stereo microphones
24 Tripod receptacle
If you attach a tripod which has a 5.5 mm (0.22 q) screw or larger, it
may damage this unit.
19
20
21
22
23
24
HX-WA20PPPCPU-VQT4F46_mst.book 26 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 27
HX-DC2
1 LCD monitor (l51)
It can open up to 90o.
It can rotate up to 180o A towards the lens or 105o B towards the
opposite direction.
2 Power button [ ] (l44)
3 USB/AV connector (l133, 143, 155)
Use the USB cable/AV cable (only the supplied cable).
4 HDMI mini connector (l133, 139)
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
1
2
3
4
HX-WA20PPPCPU-VQT4F46_mst.book 27 ページ 2012年2月14日 火曜日 午後5時10分
28 VQT4F46
5 Hand strap fixture
6 Zoom range button [ ] (l77)
7 Photoshot button [ ] (l55)
8 SET button [SET] (l64, 68, 103, 113)
Use the SET button to select the recording functions and playback
operations, and to operate the menu screen.
In this owner’s manual, the SET button is denoted as shown below.
Example:
9 In Recording Mode: Zoom lever [W/T] (l76)
In Playback Mode: Volume lever (l66, 119)
Zoom lever [W/T] (l117)
Thumbnail display switch [ / ] (l66)
10 Recording start/stop button [ ] (l52)
11 Menu button [MENU] (l68)
12 REC/ button [REC/ ]
(
l47
)
13 Battery/Card cover (l32, 42)
14 Battery holder
15 Card slot
or Select using the SET button
8
7
13
12
11
10
9
6
5
14
15
HX-WA20PPPCPU-VQT4F46_mst.book 28 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 29
16 Lens
When not using the unit, be sure to fit the lens cap to protect the lens.
Keep the lens cap out of reach of children to prevent swallowing.
17 Speaker
18 Status indicator (l7, 35, 42, 186)
19 Internal stereo microphones
20 Built-in flash (l96)
The flash reaches high temperatures and may cause burns if touched.
Please do not touch the flash.
21 Tripod receptacle
If you attach a tripod which has a 5.5 mm (0.22 q) screw or larger, it
may damage this unit.
19
17
16 18
20
21
HX-WA20PPPCPU-VQT4F46_mst.book 29 ページ 2012年2月14日 火曜日 午後5時10分
30 VQT4F46
About batteries that you can use with this unit
Inserting/removing the battery
Press the power button to turn off the unit. (l44)
1Open the rear door.
Preparation
Power supply
/
The battery that can be used with this unit is VW-VBX090.
The battery that can be used with this unit is VW-VBX070.
It has been found that counterfeit battery packs which look very
similar to the genuine product are made available to purchase in
some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery
packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we
would recommend that a genuine Panasonic battery pack is used.
HX-WA20/HX-WA2
1Unlock the LOCK lever.
2Slide the open/close lever.
3Open the rear door.
HX-WA20
HX-WA2
HX-DC2
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 30 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 31
2(To insert the battery pack)
Confirm the orientation of the terminal markings and
insert the battery.
Aterminal markings
Confirm that lever B is locked on to the battery.
It is possible to mistakenly insert the battery upside down, so be sure to
check the orientation carefully.
(To remove the battery pack)
Push the lever B toward the
direction of arrow, and pull the
battery straight out.
3Close the rear door.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 31 ページ 2012年2月14日 火曜日 午後5時10分
32 VQT4F46
Press the power button to turn off the unit. (l44)
1Open the battery/card cover.
1Close the rear door.
2Slide the open/close lever.
3Lock the LOCK lever.
Lock securely to the points where the red portion C of the open/close
lever and LOCK lever are no longer visible.
HX-DC2
1
Slide while pushing the battery/
card cover.
2Open the battery/card cover.
LOCK
SD CARD/
BATTERY
SD CARD/
BATTERY
LOCK
Unlocked
state Locked state
Open/close
lever
Lock lever
HX-WA20PPPCPU-VQT4F46_mst.book 32 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 33
2
Insert the battery, taking care to match up the terminal markings.
Aterminal markings
It is possible to mistakenly insert the battery upside down, so be sure to
check the orientation carefully.
3Close the battery/card cover.
Securely close it until it clicks.
Removing the battery
Press and hold down the power button to turn off the unit, then pull up and
remove the battery.
Always check that the LCD monitor and status indicator lamp are off.
Keep the battery pack out of reach of children to prevent swallowing.
HX-WA20PPPCPU-VQT4F46_mst.book 33 ページ 2012年2月14日 火曜日 午後5時10分
34 VQT4F46
Charging the battery
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
Important:
Be sure to use the supplied AC adaptor and USB cable. Do not
use parts supplied with other equipment.
The AC adaptor and USB cable are for use with this unit only. Do
not use them with other equipment. Similarly, do not use AC
adaptors and USB cables from other equipment with this unit.
The battery is charged while the unit is off or in the sleep mode.
(l45)
The battery cannot be charged while the unit is recording or
playing back.
It is recommended to charge the battery in a temperature between
10 oC and 30 oC (50 oF and 86 oF). (The battery temperature should
also be the same.)
When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.
/
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 34 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 35
AStatus indicator
BAC adaptor
CTo the AC outlet
Insert the plugs as far as they will go.
1Connect the USB cable to the AC adaptor.
Check that the plug portion of the AC adaptor is not loose or misaligned.
2Plug the AC adaptor into the AC outlet.
3Connect the USB cable to the unit.
The status indicator flashes red with a period of approximately 2 seconds
(approximately 1 second on, 1 second off), and charging begins.
It will turn off when the charging is completed.
Do not use any other AC adaptors except the supplied one.
Do not use any other USB cables except the supplied one.
We recommend using Panasonic batteries (l22, 36, 37, 203).
If you use other batteries, we cannot guarantee the quality of this
product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
For charging by connecting to another device, refer to page 158.
If the status indicator flashes at a particularly fast or slow rate, refer to
page 186.
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 35 ページ 2012年2月14日 火曜日 午後5時10分
36 VQT4F46
Charging and recording time
Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC
adaptor)
HX-WA20
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBX090
(optional)
[3.7 V/880 mAh]
2h
30 min
1h10min 40min
1h20min 40min
1h15min 40min
1h30min 45min
1h50min 50min
1h30min 45min
2h s
HX-WA2
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBX090
(optional)
[3.7 V/880 mAh]
2h
30 min
1h5min 40min
1h15min 40min
1h10min 40min
1h20min 45min
1h50min 50min
1h25min 45min
1h55min s
HX-WA20PPPCPU-VQT4F46_mst.book 36 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 37
These times are approximations.
The indicated charging time is for when the battery has been
discharged completely. Charging time and recordable time vary
depending on the usage conditions such as high/low
temperature.
The actual recordable time refers to the recordable time when
repeatedly starting/stopping recording, turning the unit on/off, moving
the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
HX-DC2
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBX070
(optional)
[3.7 V/700 mAh]
2h
50 min 30 min
55 min 35 min
50 min 30 min
1h5min 35min
1h25min 45min
1h5min 40min
1h30min s
Battery capacity indication
The display changes as the battery capacity reduces.
#### (red)
When the charge is low, is displayed at the center of the LCD
monitor.
Due to the characteristics of the battery, it may not be possible to
correctly display the charge remaining on the battery. For instance,
at low temperatures, the indicator may turn on earlier.
Because the status of the charge remaining indicator changes
according to the ambient temperature, conditions of use, etc., the
indicator should be considered as an approximate guide.
HX-WA20PPPCPU-VQT4F46_mst.book 37 ページ 2012年2月14日 火曜日 午後5時10分
38 VQT4F46
Approximate operating time and number of
recordable still pictures
Recording conditions by CIPA standard
CIPA is an abbreviation of Camera & Imaging Products Association.
Use of supplied battery
Using a Panasonic SD Memory Card (2 GB)
HX-WA20
Number of
recordable
pictures Approx. 230 pictures By CIPA standard
Recording time Approx. 115 min
Playback time Approx. 255 min
HX-WA2
Number of
recordable
pictures Approx. 260 pictures By CIPA standard
Recording time Approx. 130 min
Playback time Approx. 255 min
HX-DC2
Number of
recordable
pictures Approx. 210 pictures By CIPA standard
Recording time Approx. 105 min
Playback time Approx. 210 min
HX-WA20PPPCPU-VQT4F46_mst.book 38 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 39
The unit can record motion pictures, still pictures or audio to an SD card
or built-in memory. To record to an SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed
Class Rating* for motion picture recording.
* SD Speed Class Rating is the speed standard regarding continuous
writing. Check via the label on the card, etc.
Please confirm the latest information about SD Memory Cards/SDHC
Memory Cards/SDXC Memory Cards that can be used for motion
picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
To use the Eye-Fi transfer feature (l166), an Eye-Fi X2 series SD
card is required.
Operation of SD Memory Cards with a capacity of 256 MB or less is not
guaranteed.
Preparation
Recording to a card
This unit (an SDXC compatible device) is compatible with SD Memory
Cards, SDHC Memory Cards and SDXC Memory Cards. When using
an SDHC Memory Card/SDXC Memory Card with other equipment,
check the equipment is compatible with these Memory Cards.
Card type Capacity
SD Memory Card 512 MB/1 GB/2 GB
SDHC Memory Card 4GB/6GB/8GB/12GB/16GB/
24 GB/32 GB
SDXC Memory Card 48 GB/64 GB
e.g.:
HX-WA20PPPCPU-VQT4F46_mst.book 39 ページ 2012年2月14日 火曜日 午後5時10分
40 VQT4F46
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
The operation of Memory cards exceeding 64 GB cannot be
guaranteed.
When the write-protect switch A on SD card is
locked, no recording, deletion or editing will be
possible on the card.
Keep the Memory Card out of reach of children to
prevent swallowing.
Inserting/removing an SD card
Caution:
Check that the status indicator has gone off.
1Open the rear door.
When using an SD card not from Panasonic, or one previously used on
other equipment, for the first time on this unit, format the SD
card. (l72) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
HX-WA20/HX-WA2
Status indicator A
When this unit is accessing the SD card or built-in memory, the
status indicator lights up red.
32
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 40 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 41
2Insert (remove) the SD card into (from) the card slot.
3Close the rear door.
1Unlock the LOCK lever.
2Slide the open/close lever.
3Open the rear door.
Face the label side A in the direction shown in the illustration and
press it straight in as far as it will go.
Press the center of the SD card and then pull it straight out.
1Close the rear door.
2Slide the open/close lever.
3Lock the LOCK lever.
Lock securely to the points where the red portion of the open/close
lever and LOCK lever are no longer visible.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 41 ページ 2012年2月14日 火曜日 午後5時10分
42 VQT4F46
Caution:
Check that the status indicator has gone off.
1Open the battery/card cover.
2Insert (remove) the SD card into (from) the card slot.
Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
Press the center of the SD card and then pull it straight out.
HX-DC2
Status indicator A
When this unit is
accessing the SD card
or built-in memory, the
status indicator lights up
red.
HX-WA20PPPCPU-VQT4F46_mst.book 42 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 43
3Close the battery/card cover.
Securely close it until it clicks.
Do not touch the terminals on the back of the SD card.
Do not shock, bend, or drop the SD card.
Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
When the status indicator (l24, 29) illuminates in red, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the indicator is on may result in damage to
data/SD card or this unit.
Do not expose the terminals of the SD card to water, dirt or dust.
Do not place SD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant difference in temperature
(condensation can occur.)
jWhere static electricity or electromagnetic waves occur
To protect SD cards, return them to their cases when you are not using
them.
About disposing of or giving away the SD card. (l187)
HX-WA20PPPCPU-VQT4F46_mst.book 43 ページ 2012年2月14日 火曜日 午後5時10分
44 VQT4F46
Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.
About standby mode
When the LCD monitor is closed while the unit is on, the unit enters
standby mode which consumes very little power.
In standby mode, opening the LCD monitor turns on the unit, making the
unit ready for recording immediately. Use standby mode when you stop
using the unit but intend to use it again after a short time.
Preparation
Turning the unit on/off
/
HX-WA20
HX-WA2
HX-DC2
To turn off the unit
Hold down the power button until the LCD monitor goes off.
Pressing the power button for a short time sends the unit into
sleep mode. (l45)
HX-WA20PPPCPU-VQT4F46_mst.book 44 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 45
The unit does not go into standby mode when you close the LCD
monitor during motion picture recording or audio recording.
If you open the LCD monitor when in standby mode, the unit enters
recording mode.
In the following cases, opening the LCD monitor does not turn on the
unit. Press the power button to turn on the unit.
jWhen the unit is originally purchased
jWhen you have turned off the unit using the power button
About economy function
To prevent battery consumption due to forgetting to turn the unit off etc.,
the economy mode function works to send the unit into sleep mode if the
unit has been on for approximately 5 minutes (default setting) without an
operation being performed. (The LCD monitor switches off, and the
status indicator flashes green)
When the unit is in sleep mode, you can turn on the unit by pressing
any of the buttons on the unit. (The mode prior to entering sleep mode
is restored)
The time until the unit goes into sleep mode can be changed. (l71)
Approximately 1 hour after entering sleep mode, the unit enters
standby mode.
Standby mode To turn on the unit
HX-WA20PPPCPU-VQT4F46_mst.book 45 ページ 2012年2月14日 火曜日 午後5時10分
46 VQT4F46
About the high temperature warning icon
If the battery temperature or unit internal temperature (excluding battery)
rises, the high temperature warning icon will provide warning as
indicated below.
AHigh temperature
When you turn off the unit while the temperature is high ( is
displayed), you will not be able to turn on the unit again until the
temperature lowers. ( will flash.)
Battery/unit
internal
temperature
Screen
display Unit operation
(ON)
Although it is possible to
record/play back, please stop
using the unit as soon as
possible and turn off the unit.
(ON)
Motion picture recording is no
longer possible. (If you are
recording a motion picture, the
recording stops.) Please turn
off the unit.
(Flashing)
After the flashing of the ,
the unit turns off automatically.
The unit does not turn on when
the temperature drops. (
flashes.)
Wait for the temperature to
drop before using the unit
again.
HX-WA20PPPCPU-VQT4F46_mst.book 46 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 47
Change the mode to recording or playback.
Press the REC/ button.
Each press of the REC/ button changes the mode.
Preparation
Selecting a mode
/
Recording Mode (l52, 55, 59) For recording motion pictures,
still pictures and audio
Playback Mode (l64, 113) For playing back motion
pictures, still pictures and audio
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 47 ページ 2012年2月14日 火曜日 午後5時10分
48 VQT4F46
If the screen to set the date and time appears when you turn on the unit,
skip to step 2 and follow the steps to set the date and time.
1Select the menu. (l68)
2Select an item (DATE/TIME/DISP) using the SET
button and then tilt the SET button to the right or
press the SET button.
3(When [DATE] or [TIME] is selected)
Tilt the SET button to the left or right to select the
desired item and then up and down to set the
numerical values.
e.g.: When [DATE] is selected
The year can be set between 2000 and 2039.
Preparation
Setting date and time
[MENU]: # [CLOCK SET]
1
HX-WA20PPPCPU-VQT4F46_mst.book 48 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 49
(When [DISP] is selected)
Select the year/month/day display method using the
SET button.
4Press the SET button.
5Select [SAVE DATE AND TIME] using the SET button
and then press the SET button.
To return to the recording screen or playback screen, press the MENU
button.
At the time of purchase, the [CLOCK SET] is not set.
If the date and time have not been set or the built-in clock battery has
run down, the screen display and recording month/day/year
information will appear as follows.
Recording screen display: --- -- ---- --:----
Recording month/day/year information: JAN 01 2012 12:00AM
To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery for approximately 2 days, the time settings
will be stored for approximately 7 days. (The charging continues even
when the unit is turned off)
/
[Before using the unit under water] and [Maintenance after use in
water] are displayed when setting date and time for the first time after
purchase. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 49 ページ 2012年2月14日 火曜日 午後5時10分
50 VQT4F46
Basic camera positioning
To avoid dropping the unit, be sure to attach a handstrap.
When recording, make sure your footing is stable and there is no
danger of colliding with another person or object.
When you are outdoors, record pictures with the sunlight behind you. If
the subject is backlit, it will become dark in the recording.
Keep your arms near your body and separate your legs for better
balance.
When performing zoom operations, you can prevent the jitter
associated with zoom operations by placing your other hand on the
LCD monitor to stabilize the unit.
Ensure that the lens and flash are not obstructed by your fingers or the
handstrap. Also, ensure that your hand is not blocking the
microphones on the LCD monitor.
Basic motion picture recording
The unit should normally be held steady when recording.
If you move the unit when recording, do so slowly, maintaining a
constant speed.
The zoom operation is useful for recording subjects you cannot get
close to, but overuse of zoom in and zoom out can make the resulting
motion picture less enjoyable to watch.
Basic
Before recording
Example 1:
Grip the unit with the forefinger of
your right hand above the lens and
the middle finger to little finger
surrounding the body.
Example 2:
Grip the unit with the forefinger to
little finger of your right hand
surrounding the body.
HX-WA20PPPCPU-VQT4F46_mst.book 50 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 51
Recording yourself
Rotate the LCD monitor towards the lens side.
The image is horizontally flipped
as if you see a mirror image.
(However the image recorded is
the same as a normal recording.)
During recording in Slow Motion
Mode (l81), the image is not
horizontally flipped even if you
rotate the LCD monitor towards the lens side.
If the surface of the unit gets hot
Due to the characteristics of the unit, the outer surface may become
warm during use, but this does not indicate a malfunction.
If the unit starts to feel uncomfortably hot during use, you might
temporarily discontinue use until it cools down, or try holding it in your
other hand for a while. Please use a tripod or other support when using
the unit for a long time.
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 51 ページ 2012年2月14日 火曜日 午後5時10分
52 VQT4F46
Before turning on the unit, remove the lens cap.
Motion pictures are recorded to the SD card if one is inserted. If no SD
card is inserted, the motion pictures are recorded to the built-in memory.
1Open the LCD monitor.
2Press the recording start/stop button to start
recording.
AWhen you begin recording, ¥ appears.
3Press the recording start/stop button again to pause
recording.
Basic
Recording motion pictures
/
HX-DC2
HX-WA20
HX-WA2
HX-DC2
000:00:00
000:00:00
000:00:00
HX-WA20PPPCPU-VQT4F46_mst.book 52 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 53
About the screen indications in the motion picture
recording
Recording mode
Motion picture operation indicator (l171)
μ (Red)
During motion picture recording
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
( During recording in Slow Motion Mode
(l81), μ does not flash)
000:00:15
During recording:
Recording time elapsed
Each time the unit is put into recording pause, the
counter display will be reset to 000:00:00.
During recording standby:
Approximate remaining recordable time
000:00:15000:00:15000:00:15
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 53 ページ 2012年2月14日 火曜日 午後5時10分
54 VQT4F46
The images recorded between pressing the recording start/stop button
to start recording and pressing it again to pause recording become one
scene.
If the file size exceeds 4 GB during recording, the unit saves the file
and saves the continuation in a new file. (A new file is created
automatically every 4 GB (l192))
While recording is in progress, the recording will not stop even if the
LCD monitor is closed.
Please refer to page 191 for details about approximate recordable
time.
About the compatibility of the recorded motion
pictures
They are not compatible with devices other than those that support
MP4. Images cannot be played with equipment that does not
support MP4. Confirm that your equipment supports MP4 by
referring to the operating instructions.
There are some cases where the recorded motion pictures cannot
be played back, even if the device supports MP4. In such a case,
play back on this unit instead.
HX-WA20PPPCPU-VQT4F46_mst.book 54 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 55
Before turning on the unit, remove the lens cap.
Still pictures are recorded to SD card if one is inserted. If no SD card is
inserted, the still pictures are recorded to the built-in memory.
1Open the LCD monitor.
2(For auto focus only)
Press the button halfway.
AFocus area (area inside brackets)
3Press the button fully.
If you continue to hold down the button, you can check the
recorded image on the LCD monitor.
Basic
Recording still pictures
/
HX-DC2
HX-WA20
HX-WA2
HX-DC2
F3.5
F3.5
F3.5
1/30
1/30
1/30
HX-WA20PPPCPU-VQT4F46_mst.book 55 ページ 2012年2月14日 火曜日 午後5時10分
56 VQT4F46
About the recording standby screen display
The field of view of the image displayed on the LCD monitor differs for
motion picture recording and still picture recording. At time of purchase,
the recording standby screen displays video view. Press the button
halfway to change to photo view.
When [PHOTO VIEW] is set to (ON), you can change the recording
standby screen display to the photo view. (l107)
AVideo recording area
About the screen indications in the still picture
recording
Video view Photo view
Still picture operation indicator (l169)
Size of still pictures (l90)
3000 Remaining number of still pictures
ßFlash (l96)
ISO400 ISO (l100)
F3.5 Iris value
1/30 Shutter speed
Image stabilizer for still picture (l80)
MM
141414
300030003000
F3.5F3.5F3.5
1/301/301/30
ISO400ISO400ISO400
HX-WA20PPPCPU-VQT4F46_mst.book 56 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 57
About the focusing area
When [FOCUS MODE] (l98) is set to
[9-PT AUTOFOCUS], (focusing area A)
is displayed at the position where focus is
achieved.
The unit automatically determines the
position where focus is achieved from nine
focus points within the recording area. If the
focusing area doesn’t appear in a desired position, try adjusting the
camera angle etc., and focus again.
When focus is achieved over a wide range at the center of the screen,
a large focusing area is displayed.
When [FOCUS MODE] (l98) is set to [SPOT FOCUS], the unit can
focus on the subject in the center of the recording area.
When the risk of jitter increases due to a slower shutter speed while
recording still picture, (camera shake icon) will appear on the LCD
monitor. When this occurs, attach the unit to a tripod to prevent jitter
while recording or set [FLASH] to ßA (AUTO). (l96)
When recording in a dark environment, writing to the card may take
time.
To print a picture, save the picture to the SD card (l142) and print
using a PC or a printer.
The edges of still pictures recorded on this unit with a 16:9 aspect ratio
may be cut at printing. Check the printer or photo studio before
printing.
Please refer to page 193 for details about the number of recordable
pictures.
14
14
M
14
M
HX-WA20PPPCPU-VQT4F46_mst.book 57 ページ 2012年2月14日 火曜日 午後5時10分
58 VQT4F46
About recording still pictures during
motion picture recording and audio
recording
You can record still pictures while recording a motion picture or while
recording audio. (simultaneous recording)
Press the button fully (press to the bottom) to take
the picture.
When the recordable time drops to approximately
30 seconds or less, the unit can no longer record still
pictures while recording a motion picture or while
recording audio.
About picture size
When you record a still picture while recording a motion picture or audio,
the picture size will depend on the Recording mode. (l89)
Still pictures cannot be recorded during recording.
Still pictures cannot be recorded during or recording.
(l81)
Burst recording is not possible.
The Flash (l96) and Image stabilizer for still picture (l80) are
disabled.
Recording
mode Picture size Aspect ratio
/1920k1080 16:9
/1280k720 16:9
/640k480 4:3
0.9
M
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 58 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 59
Audio is recorded to the SD card if one is inserted. If no SD card is
inserted, the audio is recorded to the built-in memory.
1Open the LCD monitor.
2Select the menu. (l68)
3Start recording by pressing the recording start/stop
button.
4Press the recording start/stop button again to stop
recording.
Basic
Recording audio
[MENU]: # [REC MODE] # [ (VOICE RECORD)]
1
HX-WA20PPPCPU-VQT4F46_mst.book 59 ページ 2012年2月14日 火曜日 午後5時10分
60 VQT4F46
About the screen display for audio recording
When the recording time exceeds approximately 5 hours, the file is
saved and the audio recording ends.
Audio operation indicator (l170)
(Red)
During audio recording
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
000:00:15
During audio recording:
Recording time elapsed
Every time recording is stopped, the indicator
returns to 000:00:00.
During audio recording standby:
Approximate remaining recordable time
000:00:15
000:00:15
000:00:15
HX-WA20PPPCPU-VQT4F46_mst.book 60 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 61
The modes (appropriate for the condition) are set just by pointing the unit
to what you want to record.
Select the menu. (l68)
Please refer to page 108 for details about Manual Mode.
Basic
Intelligent Auto Mode
HX-WA20/HX-WA2
HX-DC2
[MENU]: # [INTELLIGENT AUTO] # [ (ON)]
Press the button to
switch to Intelligent Auto
Mode.
Please refer to page 108 for
details about Manual Mode.
1
MENU
HX-WA20PPPCPU-VQT4F46_mst.book 61 ページ 2012年2月14日 火曜日 午後5時10分
62 VQT4F46
*1 Mode for motion picture recording only
*2 Mode for still picture recording only
Depending on the recording conditions, the unit may not enter the
desired mode.
We recommend using a tripod in Night portrait/Night scenery/Low light.
Faces cannot be detected depending on the recording conditions, such
as when faces are of certain sizes or at certain tilts or when digital
zoom is used.
Mode Effect
Portrait Faces are detected and focused
automatically, and the brightness is adjusted
so it is recorded clearly.
Scenery The whole landscape will be recorded vividly
without whiting out the background sky,
which may be very bright.
*1 Spotlight Very bright object is recorded clearly.
*1 Low light It can record very clearly even in a dark
room or twilight.
*2 Night portrait A person and the background are recorded
with near real-life brightness.
*2 Night scenery You can record night scenery vividly by
slowing the shutter speed.
*2 Macro This allows recording while going near to the
object of recording.
*1
*2 Normal Adjusts the contrast and gives a clean image
when not using the above modes.
HX-WA20PPPCPU-VQT4F46_mst.book 62 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 63
Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and
Auto Focus operate and automatically adjust the color balance and
focusing.
Depending on the brightness of the subject etc., the aperture and shutter
speed are automatically adjusted for an optimum brightness.
Color balance and focus may not be adjusted automatically depending
on light sources or scenes. If so, manually adjust these settings.
(l108, 112)
Automatic White Balance
The illustration shows the range over which Automatic White Balance
functions.
1) The effective range of Automatic
White Balance adjustment on this unit
2) Blue sky
3) Cloudy sky (rain)
4) Sunlight
5) White fluorescent lamp
6) Halogen light bulb
7) Incandescent light bulb
8) Sunrise or sunset
9) Candlelight
If the Automatic White Balance is not
functioning normally, adjust the White
Balance manually. (l108)
Auto Focus
The unit focuses automatically.
Auto Focus does not work correctly in the following situations. Record
pictures in the Manual Focus Mode. (l112)
jRecording distant and close-up objects at the same time
jRecording a subject behind dirty or dusty window
jRecording a subject that is surrounded by objects with glossy
surfaces or by highly reflective objects
4)
5)
6)
7)
8)
10 000K
9 000K
8 000K
7 000K
6 000K
5 000K
4 000K
3 000K
2 000K
2)
1)
3)
9)
HX-WA20PPPCPU-VQT4F46_mst.book 63 ページ 2012年2月14日 火曜日 午後5時10分
64 VQT4F46
1Press the REC/ button to change to playback
mode.
2Select the file to play back using the SET button and
press the SET button.
AThe information for the file in the yellow frame is displayed.
Tilt and hold the SET button up or down to display the next (or
previous) page.
Basic
Motion picture/Still picture/Audio
playback
/
HX-WA20
HX-WA2
HX-DC2
Thumbnail display
HX-WA20PPPCPU-VQT4F46_mst.book 64 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 65
3Play back using the SET button.
BOperation icon*
* If the operation icon disappears, perform a SET button operation to
display it.
Motion picture/audio playback
Playback/Pause
Rewind playback
Fast forward playback
Stops the playback and
shows the thumbnails.
Still picture playback
Deletes still picture (l128)
Displays previous file
Displays next file
Stops playback and returns to
thumbnail display
HX-WA20PPPCPU-VQT4F46_mst.book 65 ページ 2012年2月14日 火曜日 午後5時10分
66 VQT4F46
Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the
following order if the zoom button ( / ) or zoom lever
( ) is operated to side or side.
21 files () 8 files () 1 file
If you operate the zoom button ( /
) or zoom lever ( ) to the
side from the 21 files display mode, the unit goes
to the playback folder selection screen. (l74)
If you operate the zoom button ( /
) or zoom lever ( ) to the
side with a still picture in a single file display state, the unit enters
playback zoom (l117).
When the SET button is tilted to the right (left) during single file display,
the next (previous) file is displayed.
When following operations are performed, 8 file display is restored.
jIf you turn the unit off
jIf you change the recording mode
jIf you display the menu screen
Speaker volume adjustment
To adjust the speaker volume during motion picture or audio playback,
operate the volume button ( / ) or volume lever
( ) during playback.
When a playback of a motion picture file or audio file ends, the
thumbnail display is restored.
Except in normal motion picture/audio playback, sound is not emitted.
The elapsed time for motion picture playback indication will be reset to
00:00:00 for each scene.
The elapsed time for audio playback indication will be reset to
000:00:00 for each file.
Towards :
Increases the volume
Towards :
Decreases the volume
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
WW
TT
VOLUME SETTING
HX-WA20PPPCPU-VQT4F46_mst.book 66 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 67
On the thumbnail screen for continuously recorded files (l192)
exceeding 4 GB, (8 file display) or (1 file display) is displayed.
Closing the LCD monitor stops playback and sends the unit into
standby mode. (l44)
Motion picture compatibility
The unit conforms to the MP4 format (MPEG-4 AVC file standard).
Motion pictures recorded on other MP4-compatible equipment may
not play back normally or may not play back at all on this unit.
Similarly, motion pictures recorded on this unit may not play back
normally or may not play back at all on other MP4-compatible
equipment.
Still picture compatibility
This unit conforms to the universal DCF (Design rule for Camera
File system) standard and Exif (Exchangeable Image File Format)
stipulated by JEITA (Japan Electronics and Information Technology
Industries Association). Files which do not conform to the DCF
standard cannot be played back.
The file format of still pictures supported by this unit is JPEG. (Not
all JPEG formatted files will be played back.)
This unit may degrade or not play back still pictures recorded or
created on other products and other products may degrade or not
play back still pictures recorded on this unit.
Audio compatibility
The unit conforms to the AAC file standard.
This unit may degrade or not play back audio recorded or created
on other products and other products may degrade or not play back
audio recorded on this unit.
HX-WA20PPPCPU-VQT4F46_mst.book 67 ページ 2012年2月14日 火曜日 午後5時10分
68 VQT4F46
1Press the MENU button. /
2Tilt the SET button to the left.
3Select tab A or option tab B using the SET button,
and press down the right side of the SET button or
press the SET button.
4Select from menu items C using the SET button, and
tilt the SET button to the right, or press the SET
button.
Basic
Using the menu screen
/
HX-WA20
HX-WA2
HX-DC2
MENU
MENU
HX-WA20PPPCPU-VQT4F46_mst.book 68 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 69
5Select the setting content using the SET button and
press the SET button to set.
About applicable mode indicator
In the recording menu, the recording mode that reflects the currently
displayed setting is displayed.
DApplicable mode indicator
: Setting is applied to still picture and motion picture recording.
: Setting is applied to still picture recording.
: Setting is applied to motion picture recording.
To get back to the previous screen
Press the MENU button.
To end the menu setting
Press the MENU button several times.
HX-WA20PPPCPU-VQT4F46_mst.book 69 ページ 2012年2月14日 火曜日 午後5時10分
70 VQT4F46
The displayed items change depending on the mode setting
(recording mode, playback mode).
Select the menu.
Please refer to page 48.
Set the type and volume of operation sounds for the unit.
Basic
Using Option Menu
[MENU]: , or # desired setting
OPTION MENU 1
[CLOCK SET]
[ALERT SOUND]
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped.
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the button is pressed.
([OFF]/[A]/[B]/[C]/[D])
[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button,
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the operation sounds. ([1] to [7])
[ALL OFF]/[OPERATION SOUNDS ON]:
Sets all operation sounds on/off
1
2
3
1
HX-WA20PPPCPU-VQT4F46_mst.book 70 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 71
Turns screen display [ON] (display) or [OFF] (not-display).
Sets the time until the unit goes into sleep mode to save on battery
consumption. (l45)
Sets the brightness of the LCD monitor of the unit (7 steps).
You can select the language on the screen display and the menu screen.
[DISPLAY]
[ECONOMY]
[BATTERY:REC]: Sets the time for which the unit is in the
recording mode using the battery, before it goes
into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min])
[BATTERY:PLAY]: Sets the time for which the unit is in the
playback mode using the battery, before going
into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min])
[AC:REC/PLAY]: Sets the time for which the unit is in the
recording/playback mode using the AC adaptor,
before going into sleep mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min]/
[60 min])
[BRIGHTNESS]
OPTION MENU 2
[LANGUAGE]
2
HX-WA20PPPCPU-VQT4F46_mst.book 71 ページ 2012年2月14日 火曜日 午後5時10分
72 VQT4F46
Returns the menu to the settings at the time of purchase.
Settings for [CLOCK SET], [LANGUAGE] and the double range zoom
( / ) will not be changed.
Please be aware that if a medium is formatted, then all the data recorded
on the medium will be erased and cannot be restored. Back up important
data on a PC, disc, etc. (l145)
To format the built-in memory, perform a format with the SD card
removed.
Select [FORMAT] or [DELETE DATA] using the SET button and
press the SET button.
When selecting [DELETE DATA], please use the AC adaptor. When
using the battery, [DELETE DATA] cannot be selected.
Select [DELETE DATA] and perform a physical formatting of the SD
card when the SD card is to be disposed/transferred. (l187)
Select [DELETE DATA] and perform a physical formatting of the built-in
memory when this unit is to be disposed/transferred. (l184)
[TV OUTPUT]
[TV SYSTEM]: Please refer to page 137.
[TV ASPECT]: Please refer to page 136.
[HDMI]: Please refer to page 137.
[VIERA Link]: Please refer to page 138.
[INITIAL SET]
[FORMAT]
[FORMAT]:
A logical format is performed on the SD card or built-in memory.
[DELETE DATA]:
A physical format is performed on the SD card or built-in memory.
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 72 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 73
Do not turn this unit off or remove the SD card, while formatting. Do not
expose the unit to vibrations or shock.
Creates or selects a recording folder (folder containing a recorded file).
(SD card recording only)
Insert the SD card.
Set to Recording mode. (l47)
1 Select [REC FOLDER] using the SET button and press the SET
button.
2(When creating a folder)
Select [CREATE NEW FOLDER] using the SET button and press
the SET button.
The created folder is set as the recording folder.
(When selecting a folder)
Select the folder number of the desired folder using the SET
button and press the SET button.
You cannot select folders which have been created on other
equipment or folders which already contain the maximum number
of files.
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a
PC. The card may not be used on this unit.
OPTION MENU 3
[REC FOLDER]
3
HX-WA20PPPCPU-VQT4F46_mst.book 73 ページ 2012年2月14日 火曜日 午後5時10分
74 VQT4F46
When the SD card or built-in memory contains multiple folders, you can
select a folder for playback.
Set to Playback mode. (l47)
1 Select [PLAYBACK FOLDER] using the SET button and press
the SET button.
2 Select the folder to play back using the SET button and press
the SET button.
The thumbnail screen is displayed with the first file in the selected
folder surrounded by a yellow frame.
3 Select the file to playback using the SET button and press the
SET button.
This function sets the file numbers when the card is exchanged or
formatted.
[PLAYBACK FOLDER]
[FILE NO. CONT’D]
[ON]: File numbers are retained even when the card is
exchanged or formatted.
[OFF]: File numbers are reset to start from [0001] when the
card is exchanged or formatted.
HX-WA20PPPCPU-VQT4F46_mst.book 74 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 75
In the case of the built-in memory, when [FILE NO. CONT’D] is set to
[ON] the file numbers can be given consecutive in the same way as
when the card is used.
Please refer to page 166.
When [FILE NO. CONT’D] is set to [ON] and there are files remaining
on the newly inserted card, the files subsequently recorded on the
card will be numbered as described below.
When the newly inserted card contains file numbers which are
smaller than the file numbers recorded before changing the
cards
The numbering continues from the file currently being recorded.
Example:
If you record files up to 0015 on a first card and then exchange the
first card for a second card, which already has files up to 0005
recorded on it, the new file numbers on the second card will start from
0016.
When the newly inserted card contains file numbers which are
larger than the file numbers recorded before changing the cards
The file number will be consecutive to the last file number recorded on
the second card.
Example:
If you record files up to 0005 on a first card and then exchange the
first card for a second card, which already has files up to 0015
recorded on it, the new file numbers on the second card will start from
0016.
[Eye-Fi]
HX-WA20PPPCPU-VQT4F46_mst.book 75 ページ 2012年2月14日 火曜日 午後5時10分
76 VQT4F46
Set to Recording mode. (l47)
i.Zoom and digital zoom can be set in [ZOOM MODE]. (l78)
About the zoom bar
During zoom operations, the zoom bar is displayed.
The magnification displayed at the left and right of the zoom bar is the
minimum and maximum zoom magnification.
When recording motion pictures at high levels of magnification, we
recommend fixing the unit to a tripod to prevent it moving.
Advanced (Recording)
Using the zoom
Zoom button ( / ) / Zoom lever ( )
T side: Close-up recording (zoom in)
W side: Wide-angle recording (zoom out)
B: Optical zoom
C: i.Zoom/Digital zoom (blue)
/
HX-WA20
HX-WA2
/
HX-WA20
HX-WA2
HX-DC2
AZoom bar
HX-WA20 HX-WA2 HX-DC2

TW
HX-WA20PPPCPU-VQT4F46_mst.book 76 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 77
If you take your finger off the zoom lever during zoom operation, the
operation sound may be recorded. When returning the zoom lever to
the original position, move it quietly.
The unit will focus from more than approximately 1.1 m (3.6 feet) ( )
or approximately 1 m (3.3 feet) ( / ) when the zoom
magnification is at its maximum.
When the zoom magnification is 1k, this unit can focus on a subject
approx. 10 cm (3.9q) away from the lens. (When switching to Intelligent
Auto Mode, or [FOCUS] is set to (MACRO), you can record from
as close as 1 cm (0.39q) with the zoom magnification at 1 times and
from 80 cm (2.6 feet) with the zoom magnification at its maximum.)
The enlarged size will be approximately double size (double range
zoom). Press again to return to normal size.
Set to Recording mode. (l47)
Press the zoom range button.
On the normal zoom recording screen, the icon is displayed. On
the double-range zoom recording screen, the icon is displayed.
You cannot operate the zoom range button in the i.Zoom/Digital zoom
region (blue). (l76)
The image enlarged using the double range zoom can be recorded
only as a motion picture. Still pictures are recorded without being
enlarged.
Double range zoom [HX-WA2]/[HX-DC2]
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA2 HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 77 ページ 2012年2月14日 火曜日 午後5時10分
78 VQT4F46
Zoom mode
Set the digital zoom and i.Zoom.
Select the menu.
The larger the digital zoom magnification, the more the image quality is degraded.
With still picture recording, i.Zoom is disabled.
When [ZOOM MODE] is set to (DIGITAL ZOOM) or
(i.ZOOM), Slow Motion Mode (l81) setting is canceled.
About the maximum zoom magnification
The maximum zoom magnification differs according to the mode and
settings of the unit.
[MENU]: # [ZOOM MODE] # desired setting
(DIGITAL ZOOM): Digital zoom
(i.ZOOM): This zoom function allows you to maintain
high-definition picture quality.
(OFF): Optical zoom only
Image
stabilizer
for motion
pictures
W (Wide)
T (Tele)
Zoom mode setting
(OFF)
(i.ZOOM)
(DIGITAL
ZOOM)
Motion
picture
recording
OFF/ON 1k10k15k120k
ACTIVE
MODE 1k8k12k96k
4
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 78 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 79
* The still picture can be enlarged without degrading the image quality.
(Extra Optical Zoom)
/
Picture size W
(Wide)
T (Tele)
Zoom mode setting
(OFF)
(i.ZOOM)
(DIGITAL
ZOOM)
Still
picture
recording
//
/1k5k5k60k
1k7k*7k*84k
1k8.5k*8.5k* 102k
1k10k*10k* 120k
1k7.5k*7.5k*90k
1k10k*10k* 120k
Image
stabilizer
for
motion
pictures
Double
range
zoom
W
(Wide)
T (Tele)
Zoom mode setting
(OFF)
(i.ZOOM)
(DIGITAL
ZOOM)
Motion
picture
recording
OFF/ON 1k6k7.5k60k
2k12k15k120k
ACTIVE
MODE
1k5k6k50k
2k10k12k100k
Still
picture
recording ––1k5k5k50k
12
M
8.3
M
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 79 ページ 2012年2月14日 火曜日 午後5時10分
80 VQT4F46
Use the Image stabilizer to reduce the effects of shake during recording.
Set to Recording mode. (l47)
Image stabilizer for motion pictures
Select the menu.
When (ACTIVE MODE) is set, the field of view will differ from normal recording.
Image stabilizer for still pictures
Select the menu.
When recording with a tripod, we recommend that you set the Image stabilizer off.
[SCENE MODE] will be set to (OFF) when the [E.I.S.(PICTURE)] is set to
(ON) while the [SCENE MODE] (
l
90) is set to (HDR (Backlight Comp.)).
Stabilization may not be possible under strong camera shaking conditions.
When [SCENE MODE] is set to (FIREWORKS), (NIGHT SCENERY),
(NIGHT PORTRAIT) or (LOW LIGHT), the Image stabilizer may be less effective.
The screen may shake when using optical zoom or during the auto focus
operation, but this does not indicate a fault.
Advanced (Recording)
Image stabilizer
[MENU]: # [E.I.S.(VIDEO)] # desired setting
(ACTIVE MODE): This setting gives more stabilization and is
suitable for recording when moving.
(ON): This setting is suitable for recording in a
stable state such as scenery.
(OFF): Cancel the setting.
Video view in normal recording Video view in (ACTIVE MODE)
[MENU]: # [E.I.S.(PICTURE)] # [ (ON)]
Image stabilizer does not work during zoom operations.
3
3
HX-WA20PPPCPU-VQT4F46_mst.book 80 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 81
Records slow motion picture with 240 or 480 frames per second.
Set to Recording mode. (l47)
1Set to Slow motion mode.
Each time you press the button, display changes.
2Press the recording start/stop button to start
recording.
3Press the recording start/stop button again to pause
recording.
Advanced (Recording)
Recording in Slow Motion Mode
[HX-WA20]
:Records a motion picture at 240 frames/second
(640k360 pixels)
:Records a motion picture at 480 frames/second
(320k180 pixels)
Off (cancel the setting)
HX-WA20PPPCPU-VQT4F46_mst.book 81 ページ 2012年2月14日 火曜日 午後5時10分
82 VQT4F46
After 15 seconds, recording stops automatically.
Audio is not recorded for scenes recorded in Slow Motion Mode.
When set to Slow Motion Mode, [ZOOM MODE] (l78) will be set to
(OFF).
During recording in Slow Motion Mode, the zoom magnification cannot
be changed. ( is displayed)
Change the zoom magnification before starting to record.
During recording in Slow Motion Mode, still pictures are not recorded.
(l58)
During recording in Slow Motion Mode, the following function is
disabled.
j[E.I.S.(VIDEO)]
During recording in Slow Motion Mode, the following functions are
disabled and cannot be used.
j[ZOOM MODE], [SCENE MODE] and [FACE CHASER]
[ISO] is set to AUTO.
[EXPOSURE] is set to (PROGRAM).
During recording in Slow Motion Mode, or playing back the recorded
scene, the LCD monitor or the TV screen may flicker. This is due to
effect of the light sources such as fluorescent lamp or LED light, and
this is not a malfunction.
Refer to page 192 for recordable time.
HX-WA20PPPCPU-VQT4F46_mst.book 82 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 83
Records a sequence of still pictures at a rate of 10 per second or 1 per second.
Use this function to record fast-moving subject.
Set to Recording mode. (l47)
1Select the menu.
Advanced (Recording)
Burst recording
[MENU]: # [BURST] # desired setting
(16M BURST)
/
(14M BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the button, ending the
recording when the maximum number pictures in the burst are reached.
(3M BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the button, ending the
recording when the maximum number pictures in the burst are reached.
(16M REVERSE BURST)
/
(14M REVERSE BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(3M REVERSE BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(OFF):
Cancel the setting.
1
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 83 ページ 2012年2月14日 火曜日 午後5時10分
84 VQT4F46
2(For auto focus only)
Press the button halfway.
3Press the button fully.
During recording, lights up in red.
The auto focus works to fix the focus when the button is pressed
halfway.
Maximum number of pictures in the burst
When recording with the self-timer, the recording ends when the
maximum number of pictures in the burst is reached.
When burst recording, the following functions are disabled and cannot
be used.
j[FLASH]
j [HDR (Backlight Comp.)] in [SCENE MODE]
j
(HANDHELD NIGHT SHOT) in [SCENE MODE]
j (HDR (Paint)) in [COLOR MODE]
j[PANORAMA]
The following functions cannot be used with burst recording.
j[E.I.S.(PICTURE)]
j[FACE CHASER]
With burst recording, the shutter speed is faster than 1/30.
HX-WA20
[BURST] setting Maximum number of pictures
in the burst
/10
/13
HX-WA2/HX-DC2
[BURST] setting Maximum number of pictures
in the burst
/8
/40
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 84 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 85
By recording while panning the unit vertically or horizontally you can
record a 180e or 360e panorama still picture.
Set to Recording mode. (l47)
1Select the menu.
A white cross is displayed on the LCD monitor.
2Press the button to start the recording.
A red cross is displayed at the center of
the LCD monitor.
3Pan the unit horizontally or vertically.
The red cross will shift in the panning
direction. Record in such a way that the
red cross and the white cross align. (If the
red cross separates from the guide, the
panorama still picture cannot be correctly
recorded)
To stop panorama recording partway through
Press the button.
Advanced (Recording)
Recording panorama still pictures
[MENU]: # [PANORAMA] #
[ (360e PANORAMA)] or [ (180e PANORAMA)]
1
Aguide
(Example) When
panning horizontally
HX-WA20PPPCPU-VQT4F46_mst.book 85 ページ 2012年2月14日 火曜日 午後5時10分
86 VQT4F46
Recording technique
About size of still pictures
The sizes of panorama still pictures are as follows.
During panorama still picture recording, the zoom function is disabled.
If you record a motion picture with [PANORAMA] set to (360e
PANORAMA) or (180e PANORAMA), zoom operations are
available during recording but zoom will be automatically canceled
when you stop.
Move the camera toward the direction of recording taking care not to
shake. (Correct recording is not possible when the shake is too big)
HX-WA20
Panorama setting
Picture size
Horizontal
panorama still
picture
Vertical
panorama still
picture
(360e PANORAMA) 10688k720 1280k10688
(180e PANORAMA) 5344k720 1280k5344
HX-WA2/HX-DC2
Panorama setting
Picture size
Horizontal
panorama still
picture
Vertical
panorama still
picture
(360e PANORAMA) 14400k720 1280k14400
(180e PANORAMA) 7200k720 1280k7200
HX-WA20PPPCPU-VQT4F46_mst.book 86 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 87
The panorama still picture that will be recorded will be narrower than
what is displayed in the recording screen.
Panorama still pictures are indicated by or in the 1-file or 8-
file thumbnail display.
When recording panorama still pictures, the following functions are
disabled and cannot be used.
j[FLASH], [SCENE MODE], (HDR (Paint)) in [COLOR MODE],
[BURST] and [SELF TIMER]
The following functions do not work with recording panorama still
pictures.
j[E.I.S.(PICTURE)]
When recording panorama still pictures, [FOCUS] is set to
(AUTO).
When recording panorama still pictures, [EXPOSURE] is set to
(PROGRAM).
Focus and white balance will be fixed to the optimal values for the still
picture for first frame. Therefore, it may not record with focus or
brightness optimal for the whole panorama still picture when focus or
brightness changes drastically during the recording.
Since panorama still picture is composed from multiple still pictures,
there may be cases where the subject may warp or connection may
stand out.
In the following cases, it may not be possible to record correctly.
jWhen the swing speed is too fast or too slow
jWhen recording the subject that have monotone colors or patterns
repeating (such as sky, sandy beach, etc.).
jWhen recording moving subjects (such as people, pets, automobile,
wave, flowers swaying in the wind, etc.)
jWhen recording in a dark place
jWhen recording in places with flickering light source such as
fluorescent lamp, candle, etc.
jWhen recording the unit held away from your body (axis of rotation)
The recorded panorama picture will not be saved when the recording is
terminated before reaching the half of the set angle. Even if the
recording exceeds the halfway point, black strip will be recorded in the
area that was not recorded when the recording is terminated before
reaching the set angle.
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 87 ページ 2012年2月14日 火曜日 午後5時10分
88 VQT4F46
Set to Recording mode. (l47)
Select the menu.(l68)
When [SCENE MODE] is set to (UNDER WATER), [Before using
the unit under water] and [Maintenance after use in water] are
displayed. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
After use underwater, wash the unit in fresh water and dry well. (l18)
Do not use the Under Water Mode except when recording underwater.
When recording underwater, the sound of the unit motor will be
recorded at a relatively high volume. However, in Under Water Mode,
the sound of the motor is suppressed through the action of an audio
filter. (sound quality differs to when recording in other modes)
Advanced (Recording)
Recording underwater
[HX-WA20]/[HX-WA2]
The unit can record underwater at depths of down to 3 m (10 feet). (for
periods within 60 minutes)
Before recording underwater, be sure to read “(Important) About
the Waterproof and Dustproof Performance of this unit [HX-
WA20]/[HX-WA2]” (page 13 to 21) and to use the camera
correctly. Incorrect use may result water entering the unit and
malfunction.
Record with color balance and audio that
are suitable for recording underwater
When recording underwater, set [SCENE MODE] to (UNDER
WATER). The color balance and audio recording will be suitable for
recording underwater. (l90)
[MENU]: # [SCENE MODE] # [ (UNDER WATER)]
1
HX-WA20PPPCPU-VQT4F46_mst.book 88 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 89
Set to Recording mode. (l47)
Select the menu. (l68)
You can switch between motion picture recording and audio recording,
and switch the image quality of the motion picture to record.
* is a format suitable for Mac (iMovie’11). It is recommended when
using a Mac.
Recordable time using the battery (l36)
This function’s default setting is mode.
Please refer to page 191 about approximate recordable time.
When the unit is moved a lot or moved quickly, or when a fast-moving
subject is recorded (particularly when recording in mode),
mosaic-type noise may appear at playback.
Advanced (Recording)
Recording functions of menus
[MENU]: , , or # desired setting
RECORDING MENU 1
[REC MODE]
[MENU]: # [REC MODE] # desired setting
:Records with 1920k1080 pixels. (60i)
:Records with 1920k1080 pixels. (30p)
:Records with 1280k720 pixels. (60p)
:Records with 1280k720 pixels. (30p)
*
:Records with 960k540 pixels. (30p)
:Records with 640k480 pixels. (30p)
:Records audio. (VOICE RECORD)
1
2
3
4
1
1
HX-WA20PPPCPU-VQT4F46_mst.book 89 ページ 2012年2月14日 火曜日 午後5時10分
90 VQT4F46
The higher the number of pixels, the higher the clarity of the picture when
printing.
Please refer to page 61.
When you record images in different situations, this mode automatically
sets optimum shutter speeds and apertures.
[PICTURE SIZE]
[MENU]: # [PICTURE SIZE] # desired setting
Picture size
(HX-WA20) Picture size
(HX-WA2/HX-DC2) Aspect ratio
4608k3456 4352k3264 4:3
3616k2712 3744k2808 4:3
2560k1920 2560k1920 4:3
2048k1536 2048k1536 4:3
640k480 640k480 4:3
4608k2592 4352k2448 16:9
3840k2160 3744k2106 16:9
2560k1440 2560k1440 16:9
1920k1080 1920k1080 16:9
[INTELLIGENT AUTO]
[SCENE MODE]
[MENU]: # [SCENE MODE] # desired setting
1
12
M
8.3
M
HX-DC2
1
HX-WA20PPPCPU-VQT4F46_mst.book 90 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 91
* Mode for still picture recording only. This will not operate during the
motion picture recording.
(OFF):
Cancel the setting
5 (SPORTS):
To make fast moving scenes less shaky with slow playback and pause
of playback
(PORTRAIT):
To make people stand out against the background
(SPOT LIGHT):
Improved quality when subject is brightly illuminated
(SNOW):
Improved image quality when shooting in snowy locations
(BEACH):
To make blue in the sea or sky vibrant
(SUNSET):
To make red in the sunrise or sunset vibrant
(FIREWORKS):
To capture the fireworks in the night sky beautifully
(LANDSCAPE):
For spatial scenery
(NIGHT SCENERY):
To capture the evening or night scenery beautifully
(NIGHT PORTRAIT):
To capture a person and the background brightly
(HANDHELD NIGHT SHOT)*:
For bright still pictures with reduced image shake
(HDR (Backlight Comp.))*:
Provides definition in regions that would otherwise be black or white
/
(UNDER WATER):
For reduced background noise and clear underwater recording (l88)
(LOW LIGHT):
For dark scenes, such as at dusk
HX-WA20
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 91 ページ 2012年2月14日 火曜日 午後5時10分
92 VQT4F46
(SUNSET/FIREWORKS/LANDSCAPE/NIGHT SCENERY/NIGHT
PORTRAIT)
jImage may get blurry when close object is recorded.
(FIREWORKS)
jThe shutter speed is 1/30. (Motion picture recording)
jImage may get washed out when recorded in bright surrounding.
j (the camera shake icon) is displayed constantly when recording
still pictures, but this does not indicate a fault.
(NIGHT SCENERY/NIGHT PORTRAIT/HDR (Backlight Comp.))
jUsing a tripod is recommended.
(LOW LIGHT)
jThe shutter speed is 1/15 or more. (Motion picture recording)
(HDR (Backlight Comp.))
jWhen recording a moving subject, a ghost image may appear.
jThe field of view of the recorded still picture is smaller than the range
displayed on the recording screen.
Limitations of scene mode settings
Setting Limitations
(SPORTS) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(PORTRAIT)
(SPOT LIGHT)
(SNOW)
(BEACH) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
WHITE BALANCE: Fixed to .
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(SUNSET)
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 92 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 93
(FIREWORKS) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FLASH: Fixed to .
ISO: Fixed to AUTO.
FACE CHASER: Fixed to (OFF).
EXP COMPENSATION: Fixed to ± 0.
WHITE BALANCE: Fixed to .
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(LANDSCAPE) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FACE CHASER: Fixed to (OFF).
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(NIGHT SCENERY) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FLASH: Fixed to .
FACE CHASER: Fixed to (OFF).
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
Setting Limitations
HX-WA20
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 93 ページ 2012年2月14日 火曜日 午後5時10分
94 VQT4F46
(NIGHT PORTRAIT) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(HANDHELD NIGHT
SHOT)
BURST: Fixed to (OFF).
PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FLASH: Fixed to .
E.I.S.(PICTURE): Fixed to .
ISO: Fixed to AUTO.
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(HDR (Backlight
Comp.))
BURST: Fixed to (OFF).
PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FLASH: Fixed to .
E.I.S.(PICTURE): Fixed to .
METERING MODE: Fixed to .
ISO: Fixed to AUTO.
PICTURE SIZE: or setting is
disabled.
( setting is changed to setting
and setting is changed to
setting)
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
Setting Limitations
HX-WA20
HX-WA20
HX-WA20
12
M
12
M
8.3
M
HX-WA20PPPCPU-VQT4F46_mst.book 94 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 95
Please refer to page 83.
Please refer to page 85.
/
(UNDER WATER)
PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
(LOW LIGHT) PANORAMA: Fixed to (OFF).
COLOR MODE: Fixed to .
FOCUS: Fixed to .
FLASH: Fixed to .
ISO: Fixed to AUTO.
Slow Motion Mode: Fixed to off.
EXPOSURE: Fixed to .
[BURST]
[PANORAMA]
Setting Limitations
HX-WA20
HX-WA2
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 95 ページ 2012年2月14日 火曜日 午後5時10分
96 VQT4F46
Please see below. ( [FLASH])
When the button is pressed, the flash is activated and the picture
will be recorded. Use the built-in flash in order to record still pictures in
dark places.
When [FLASH] is set to ßA (AUTO) or ß (ON), [BURST] and
[PANORAMA] are set to (OFF).
[SCENE MODE] will be set to (OFF) when the [FLASH] is set to
ßA (AUTO) or ß (ON) while the [SCENE MODE] (l90) is set to
(FIREWORKS), (NIGHT SCENERY), (HANDHELD
NIGHT SHOT) ( only), (HDR (Backlight Comp.)), or
(LOW LIGHT).
If you register a shortcut function (l103) to the SET button, you can
change the flash setting from the recording screen.
/
[FLASH]
[MENU]: # [FLASH] # desired setting
RECORDING MENU 2
[FLASH]
[MENU]: # [FLASH] # desired setting
ßA (AUTO): The unit determines the brightness of the subject
and emits a flash if necessary.
ß (ON): The unit emits a flash irrespective of the brightness
of the subject.
(OFF): Cancel the setting.
HX-WA20
HX-WA2
1
HX-DC2
2
HX-DC2
2
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 96 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 97
The timer can be used to record images or audio.
When Ø2 (2sec) is selected
When you press the button or the recording start/stop button, the
status indicator flashes red for approximately 2 seconds, then recording
begins.
On the LCD monitor, an indication of ( # ) appears
to notify you of the recording timing.
When Ø10 (10sec) is selected
When you press the button or the recording start/stop button, the
status indicator flashes red for approximately 10 seconds, then recording
begins.
On the LCD monitor, an indication of ( # #
# # ) appears to notify you of the
recording timing.
After the recording, the self-timer setting is canceled.
To stop the timer midway through
Press the button or the recording start/stop button.
Setting the self-timer to Ø2 or Ø10
is a good way to prevent image
shake when the button is pressed while using a tripod etc.
If you register a shortcut function (l103) to the SET button, you can
change the self-timer setting from the recording screen.
If you set [FOCUS] (l112) to (AUTO) or (MACRO) when
recording still pictures, the unit will focus automatically immediately
before recording.
[SELF TIMER]
[MENU]: # [SELF TIMER] # desired setting
(OFF): Cancel the setting
Ø2 (2sec): Records after 2 seconds
Ø10 (10sec): Records after 10 seconds
2
HX-WA20PPPCPU-VQT4F46_mst.book 97 ページ 2012年2月14日 火曜日 午後5時10分
98 VQT4F46
With motion picture recording/audio recording, recording does not turn
off automatically.
If you perform any of the following cases, the self-timer will be
canceled.
jIf you turn the unit off
jIf you change to the playback mode
jIf you send unit into standby mode by closing the LCD monitor
jWhen it goes into sleep mode
Please refer to page 112.
You can select the focusing method according to the position of the
subject.
You can change the light-metering method used to measure brightness.
[FOCUS]
[FOCUS MODE]
[MENU]: # [FOCUS MODE] # desired setting
(9-PT AUTOFOCUS): The unit determines the focus
automatically from 9 focus points ( )
in the recording range.
(SPOT FOCUS): The unit focuses on the subject over the
focus mark ( ) displayed at the
center of the LCD monitor.
[METERING MODE]
[MENU]: # [METERING MODE] # desired setting
2
2
HX-WA20PPPCPU-VQT4F46_mst.book 98 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 99
[SCENE MODE] will be set to (OFF) when the [METERING
MODE] is set to (CENTER) or (SPOT) while the [SCENE
MODE] (l90) is set to (HDR (Backlight Comp.)).
You record in different colors and add effects such as skin smoothing.
* Mode for still picture recording only
When [COLOR MODE] is set, [SCENE MODE] (l90) is canceled.
(MULTI): The unit automatically assesses the
distribution of brightness over the
screen and meters to ensure that the
exposure is appropriate.
(CENTER): The unit averages light measurements
over the entire screen, giving higher
weight to the subject at the center of the
screen.
(SPOT): The unit meters the subject over spot
meter target ( ) displayed at the
center of the LCD monitor.
[COLOR MODE]
[MENU]: # [COLOR MODE] # desired setting
(OFF): Cancel the setting.
(HDR (Paint))*:Records still pictures with picture effects.
(SOFT SKIN): Records with skin softening effects.
(MONOCHROME): Records in monochrome.
(SEPIA): Records with colors adjusted to sepia.
(VIVID): Reduced sharpness and increases color.
(SOFT): Records with reduced sharpness for a
softer image.
2
HX-WA20PPPCPU-VQT4F46_mst.book 99 ページ 2012年2月14日 火曜日 午後5時10分
100 VQT4F46
(HDR (Paint))
jWe recommend use of a tripod.
jThe flash is disabled.
j[BURST] and [PANORAMA] are set to (OFF).
j[E.I.S.(PICTURE)] is set to (OFF).
j[METERING MODE] is set to (MULTI).
j[ISO] is set to AUTO.
j
PICTURE SIZE: or setting is disabled.
( setting is changed to setting and setting is changed
to setting)
[EXPOSURE] is set to (PROGRAM).
jThe field of view of the recorded still picture is smaller than the range
visible on the recording screen.
Please see below. ( [ISO])
Although, with the default settings, the ISO sensitivity is set automatically
in accordance with the brightness of the subject, the ISO sensitivity can
be fixed.
/
[ISO]
[MENU]: # [ISO] # desired setting
RECORDING MENU 3
[ISO]
[MENU]: # [ISO] # desired setting
AUTO: ISO sensitivity is set automatically.
50: Sets the sensitivity to ISO 50.
100: Sets the sensitivity to ISO 100.
HX-WA20
12
M
12
M
8.3
M
HX-WA20
HX-WA2
2
HX-DC2
3
HX-DC2
3
HX-WA20PPPCPU-VQT4F46_mst.book 100 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 101
The displayed ISO display value is the default output sensitivity.
The higher the ISO sensitivity, the greater the capability of the unit to
record with fast shutter speeds and in dark environments. However, a
higher sensitivity may also mean more noise in the recorded image
and a more grainy image.
[SCENE MODE] will be set to (OFF) when the [ISO] is set to other
than AUTO while the [SCENE MODE] (l90) is set to
(FIREWORKS), (HDR (Backlight Comp.)), (HANDHELD
NIGHT SHOT) ( only), or (LOW LIGHT).
Slow Motion Mode (l81) is set to off.
If you register a shortcut function (l103) to the SET button, you can
change the ISO sensitivity setting from the recording screen.
Please refer to page 108.
Please refer to page 110.
200: Sets the sensitivity to ISO 200.
400: Sets the sensitivity to ISO 400.
800: Sets the sensitivity to ISO 800.
1600: Sets the sensitivity to ISO 1600.
3200: Sets the sensitivity to ISO 3200.
[WHITE BALANCE]
[EXPOSURE]
HX-WA20
HX-WA20
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 101 ページ 2012年2月14日 火曜日 午後5時10分
102 VQT4F46
The detected face is displayed in the frame.
About prioritized face framing
The prioritized face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritized face frame and adjust the
brightness accordingly.
The gray frames are for face detection only.
When you press the button halfway while recording still pictures,
the unit focuses on the prioritized frame. When focus is achieved, the
prioritized frame turns green.
A maximum of 15 frames are detected, with the frames near the center
of the screen and large frames being prioritized.
For still pictures with detected faces, is displayed on the 1-file
thumbnail display. (l66)
If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
[SCENE MODE] will be automatically set to (OFF) when the
[FACE CHASER] is set to (ON) while the [SCENE MODE] (l90)
is set to (FIREWORKS), (LANDSCAPE), or (NIGHT
SCENERY).
[FOCUS MODE] (l98) is set to (9-PT AUTOFOCUS) and
[METERING MODE] (l98) is set to (MULTI).
Face detection is disabled when using burst recording or panorama
still picture recording.
When [FOCUS] (l112) is set to (MANUAL), Auto focus is
disabled.
When it is set to [ISO] (l100) or [EXP COMPENSATION] (l106),
the brightness may not be adjusted.
When [FACE CHASER] is set to (ON), Slow Motion Mode (l81) is
set to off.
When [EXPOSURE] (l110) is set to (SHUTTER),
(APERTURE) or (MANUAL), the brightness is not adjusted.
[FACE CHASER]
[MENU]: # [FACE CHASER] # [(ON)]
3
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 102 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 103
Please refer to page 80.
Please refer to page 80.
This setting registers the functions (shortcut functions) performed when
the SET button is tipped up, down, left and right with the recording screen
displayed.
1 Select the destination (up, down, left or right on the SET button)
for the function using the SET button and press the SET button.
[E.I.S.(VIDEO)]
[E.I.S.(PICTURE)]
[SHORTCUTS]
[MENU]: # [SHORTCUTS]
///:
Functions are registered individually to up, down, left and right of the
SET button.
RECOMMENDED SETTINGS:
Regular functions are automatically registered.
3
HX-WA20PPPCPU-VQT4F46_mst.book 103 ページ 2012年2月14日 火曜日 午後5時10分
104 VQT4F46
2 Select the function to register using the SET button, and press
the SET button.
To continue and register other functions, repeat Steps 1 and 2.
3 Press the MENU button.
A confirmation screen for the shortcut
settings appears.
4 Press the MENU button to complete
the settings.
5 Tilt the SET button in the direction in
which you registered the function.
Each tip of the SET button changes the registered function setting.
To confirm the shortcut settings, press the MENU button on the screen
in Step 1. A confirmation screen appears.
(AF LOCK):
Locks the focus. (l105)
(AE LOCK):
Locks the exposure. (l105)
(FOCUS):
Sets the focus. (l112)
(Can be registered to and only)
(FLASH):
Sets the flash operation. (l96)
(EXP COMPENSATION):
Corrects the exposure. (l106)
(ISO):
Sets the ISO sensitivity. (l100)
Ø(SELF TIMER):
Sets the self-timer. (l97)
(EXPOSURE):
Sets the shutter speed and the iris value. (l110)
(PHOTO VIEW):
Sets photo view. (l107)
[OFF]:
Shortcut functions are not registered.
-
+
ISOISOISO
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 104 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 105
AF lock
If you register AF lock as a shortcut function (l103), you can record with
the focus locked.
Register the shortcut function. (l103)
Tilt the SET button in the direction to which you registered AF lock.
will appear on the LCD monitor.
When [FOCUS] is set to (MANUAL), AF Lock is disabled.
The AF lock setting is canceled if any of the following operations are
performed.
jSetting playback mode
jIf [SCENE MODE] is set to (FIREWORKS)
jIf the [FOCUS] setting is changed
jTurning off the unit
jSetting standby mode
j
Setting Slow Motion Mode
AE lock
If you register AE lock as a shortcut function (l103), you can record
with the exposure locked.
Register the shortcut function. (l103)
Tilt the SET button in the direction to which you registered AE lock.
will appear on the LCD monitor.
The AE lock setting is canceled if any of the following operations is
performed.
jSetting playback mode
jIf the [SCENE MODE] setting is changed
jIf [COLOR MODE] is set to (HDR (Paint))
jIf the [ISO] setting is changed
jIf the [WHITE BALANCE] setting is changed
jIf the [EXP COMPENSATION] setting is changed
jTurning off the unit
jSetting standby mode
j
Setting Slow Motion Mode
If the [EXPOSURE] setting is changed
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 105 ページ 2012年2月14日 火曜日 午後5時10分
106 VQT4F46
Exposure compensation
If you register exposure compensation as a shortcut function (l103),
you can record with altered brightness.
Register the shortcut function (l103)
1 Tilt the SET button in the direction to which you registered the
exposure compensation.
The exposure compensation bar is displayed.
2 Tilt the SET button to the left or right to correct the exposure.
The exposure compensation value is displayed to the left side of the
exposure compensation bar.
The exposure compensation value can be corrected in the range –1.8
to +1.8.
The exposure compensation bar disappears when the SET button is pressed.
The exposure setting is canceled if any of the following operations is
performed.
jSetting the pointer to n 0
jSetting playback mode
jChanging the [SCENE MODE] settings
jTurning off the unit
jSetting standby mode
j
Setting Slow Motion Mode
-
+
00
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 106 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 107
Please see below. ( / [PHOTO VIEW])
Selects the desired field of view (photo view or video view) for the
recording standby screen display. When photo view is selected, a frame
to show the field of view during video recording appears.
AVideo recording area
If you register a shortcut function (l103) to the SET button, you can
change the photo view setting from the recording screen.
Please refer to page 78.
[PHOTO VIEW]
[MENU]: # [PHOTO VIEW] # desired setting
RECORDING MENU 4
/
[PHOTO VIEW]
[MENU]: # [PHOTO VIEW] # desired setting
(ON): Photo view (OFF): Video view
[ZOOM MODE]
HX-WA2
3
HX-WA20
HX-DC2
4
HX-WA20
HX-DC2
4
HX-WA20PPPCPU-VQT4F46_mst.book 107 ページ 2012年2月14日 火曜日 午後5時10分
108 VQT4F46
This is for reducing the wind noise coming into the built-in microphones.
This function’s default setting is [ (ON)].
You may not see the full effect depending on the recording conditions.
Sets the period for which the recorded image appears on the LCD
monitor after the button is pressed.
White Balance
Automatic White Balance function may not reproduce natural colors
depending on the scenes or lighting conditions. If so, you can adjust the
White Balance manually.
1Select the menu.
[WIND CUT]
[MENU]: # [WIND CUT] # [ (ON)]
[AUTO REVIEW]
[MENU]: # [AUTO REVIEW] # desired setting
(1sec): Still pictures are displayed for approximately
1 second after being recorded.
(2sec): Still pictures are displayed for approximately
2 seconds after being recorded.
(OFF): Still pictures are not displayed after being recorded.
Advanced (Recording)
Manual recording
[MENU]: # [WHITE BALANCE]
4
4
1
2
3
HX-WA20PPPCPU-VQT4F46_mst.book 108 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 109
2Select the white balance using the SET button, and
press the SET button.
To return to auto setting, select (AUTO).
To set the White Balance manually
1 Point the unit at a white subject that fills the screen.
2 Select the (WHITE SET) and press the SET button.
The LCD monitor display will go dark for a moment and then return to
the recording menu. When the icon appears on the recording
menu, the white balance has been set.
When the brightness changes or the recording location changes and
the color balance is no longer correct, check whether the white balance
setting is suitable for the light source.
If you turn on the unit with the lens cap still fitted, the auto white
balance will not be set correctly. Always remove the lens cap before
turning on the unit.
[SCENE MODE] will be set to (OFF) when the [WHITE BALANCE]
is set to other than (AUTO) while the [SCENE MODE] (l90) is set
to (BEACH), (SUNSET), or (FIREWORKS).
(AUTO): The unit distinguishes the weather and
lighting at the recording location and
automatically adjusts the white balance.
(Auto)
(SUNNY): Outdoors under a clear sky
(CLOUDY): Outdoors under cloudy sky
(INDOOR 1): Incandescent light, video lights like in the
studio, etc.
(INDOOR 2): Color fluorescent lamps, sodium lamps in
gymnasiums, etc.
(WHITE SET): Mercury-vapor lamps, sodium lamps,
some fluorescent lights
Lights used for wedding receptions at
hotels, stage spotlights in theaters
Sunrise, sunset, etc.
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 109 ページ 2012年2月14日 火曜日 午後5時10分
110 VQT4F46
Manual shutter speed/iris adjustment
[HX-WA20]
Shutter speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
1Select the menu.
2Select an exposure mode using the SET button and
press the SET button.
3(On selecting (MANUAL))
Tilt the SET button up/down to select shutter speed
or iris value, and tilt left and right to set.
(On selecting (SHUTTER) or (APERTURE))
Tilt the SET button left or right to set.
4Press the SET button.
AF2.8: Iris value:
F2.8 ... !"""""# ... F8.0
Value closer to F8.0 darken the image.
Value closer to F2.8 brighten the image.
[MENU]: # [EXPOSURE]
(PROGRAM): Exposure is set automatically.
(SHUTTER): Set the shutter speed.
(APERTURE): Set the iris value.
(MANUAL): Set the shutter speed and the iris value.
3
F2.8
1/250
M
HX-WA20PPPCPU-VQT4F46_mst.book 110 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 111
B1/250: Shutter speed:
2 (2 seconds) to 1/1000 (1/1000 second)
The shutter speed closer to 1/1000 is faster.
To restore automatic settings, press the button.
When setting both the shutter speed and the iris value, set the shutter
speed and then set the iris value.
When (SHUTTER), (APERTURE) or (MANUAL) are set,
the following functions are disabled and cannot be used.
j[PANORAMA], [SCENE MODE], (HDR (Paint)) in [COLOR
MODE] and Slow Motion Mode
When you allocate a shortcut function (l103) to the SET button with
(SHUTTER), (APERTURE) or (MANUAL) set, you can
change the (SHUTTER), (APERTURE) or (MANUAL)
setting from the recording screen.
Manual shutter speed adjustment
Manual iris adjustment
Depending on the zoom magnification, there are iris values that are not
displayed.
When recording with a slow shutter speed, attach the unit to a tripod
etc. to prevent camera shake.
You may see a band of light around an object that is shining very
brightly, or is highly reflective.
During normal playback, image movement may not look smooth.
If you record an extremely bright object or record under indoor lighting,
color and screen brightness may change or a horizontal line may
appear on the screen. In this case, record in the Intelligent Auto Mode
or set the shutter speed to 1/60 in areas where the power supply
frequency is 60 Hz, or 1/100 in areas of 50 Hz.
With a slow shutter speed, you can record in darker locations but may
find that noise increases in the recorded images.
With burst recording, the shutter speed is faster than 1/30.
With motion picture recording, the shutter speed will be automatically
set to 1/30 if you set it to a value less than 1/30.
HX-WA20PPPCPU-VQT4F46_mst.book 111 ページ 2012年2月14日 火曜日 午後5時10分
112 VQT4F46
Setting the focus and recording
Set the focus in accordance with the distance to the subject.
1Select the menu.
2Select the item to set using the SET button and press
the SET button.
Using manual focus
1 Select (MANUAL) and press the
SET button.
The bar for setting the focus appears.
2 Tilt the SET button left or right to set
the focus, and press the SET button.
Set the focus and return to the recording
screen.
When focus is set to (MANUAL) or (MACRO), the
[PANORAMA] and [SCENE MODE] functions are set to (OFF).
Even with a setting of (MANUAL) or (MACRO), if you set the
[PANORAMA] and [SCENE MODE] to a setting other than (OFF),
the focus setting is set to (AUTO).
When you set the focus to (MACRO), start with the zoom set to
Wide (W).
If you register a shortcut function (l103) to the SET button, you can
change the focus setting from the recording screen.
In certain cases, it may be difficult to achieve focus automatically.
[MENU]: # [FOCUS] # desired setting
(AUTO): The focus is set automatically.
(MANUAL): Adjusts the focus manually when it is difficult
to achieve focus automatically.
(MACRO): Select when recording a subject from close
range.
2
HX-WA20PPPCPU-VQT4F46_mst.book 112 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 113
Playback using operation icon
For details on the basic playback operations, refer to page 64.
Advanced (Playback)
Playback Operations
Playback
operation
SET button/
Playback
display Operating steps
Fast
forward/
rewind
playback
During
Playback
Tilt the SET button to the right
during playback for fast-forward
playback (tilt to the left for rewind
playback).
Each tip of the SET button changes
the playback speed. (Maximum 15k
normal speed)
Tilt the SET button in the opposite
direction during forward winding or
rewinding to slow the winding speed.
Press the SET button to restore
normal playback.
HX-WA20PPPCPU-VQT4F46_mst.book 113 ページ 2012年2月14日 火曜日 午後5時10分
114 VQT4F46
Slow-
motion
playback During Pause
With the playback paused, tilt and
hold the SET button to the right for
slow motion playback until release
(tilt and hold to the left for reverse
slow motion playback).
Press the SET button to restore
normal playback.
Frame-
by-frame
playback
The
motion
picture is
advanced
one frame
at a time.
With playback paused, tilt the SET
button to the right (tilt to the left for
reverse frame-by-frame playback)
Reverse frame-by-frame playback
will be in 1 second interval ( ,
, , , and ) or
0.5 second interval ( ).
Press the SET button to restore
normal playback.
Scroll
playback
During stop/
during pause
Press the SET button during the
display of the panorama still picture
When playing back a horizontal
panorama still picture, the playback
scrolls from left to right.
When playing back a vertical
panorama still picture, the playback
scrolls from down to up.
Pressing the SET button again to
pause the scroll playback.
Playback
operation
SET button/
Playback
display Operating steps
HX-WA20PPPCPU-VQT4F46_mst.book 114 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 115
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still
picture. The picture size of the still picture to be created will differ
depending on the recording mode of the recorded motion picture.
1Pause at the location to be saved as a still picture
during the playback.
You may find it convenient to use slow motion playback and frame-by-
frame playback here.
2Press the button fully.
3Select the aspect ratio of the still picture to be saved
and press the SET button.
* White bands will be recorded at the top and bottom of still pictures.
Date the motion picture was recorded will be registered as date of the
still picture.
Quality will be different from the normal still picture.
When creating a still picture from a recorded motion picture in
recording mode, [16:9] cannot be selected.
The still picture is saved with a new image number.
Aspect ratio Recording mode Picture size
16:9
/ 1920k1080
/ 1280k720
960k540
4:3
*/ * 1920k1440
*/ * 1280k960
* 960k720
640k480
HX-WA20PPPCPU-VQT4F46_mst.book 115 ページ 2012年2月14日 火曜日 午後5時10分
116 VQT4F46
Cutting out a section of a panorama still
picture
You can cut out and save a section of a panorama still picture you have
recorded.
1Display the panorama still picture.
2Press the SET button to start scroll playback of the
panorama still picture.
3Press the SET button to pause at the section you
wish to cut out.
4Press the button.
The cut-out still picture is saved with picture size of 1280k720.
The date and time of the recording of the panorama still picture are
stored as the date and time of the cut-out picture.
The cut-out still picture is saved with a new image number.
HX-WA20PPPCPU-VQT4F46_mst.book 116 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 117
Zooming in on a still picture during
playback (Playback zoom)
You can zoom in on still pictures during playback.
1Operate the zoom button ( /
) or zoom lever ( ) to
side.
You can zoom in to a maximum of 72k (7200%)
( ) or 68k (6800%) ( /
). (The maximum zoom magnification
differs according to the size of the still picture)
The unit zooms in on the central portion of the image.
If the still picture has been recorded using face detection (l102), the
unit zooms in on the detected face.
When you zoom in on a rotated still picture with a 4:3 or 16:9 aspect
ratio, the still picture before rotation is displayed. With a panorama still
picture, the rotated picture is displayed. (l122)
The more a picture is enlarged, the more its quality deteriorates.
2Shift the position of
the zoomed portion
using the SET button.
Zooming out from the zoomed still picture
Operate the zoom button ( / ) or zoom lever ( )
to side to zoom out.
Press the SET button to restore the normal display (100%) screen.
Saving the zoomed still picture
Press the button while zoomed in.
The rotation information is retained for the 4:3 and 16:9 rotated still
pictures. The rotation information is not retained for the panorama still
picture, but rotated still picture is saved.
In the case of still pictures recorded using face detection, the face
detection data is not retained.
The date and time of the recording of the original still picture are stored
as the date and time of any picture stored after zooming.
HX-WA20
HX-WA2 HX-DC2
HX-WA20 HX-WA2
HX-DC2
190%190%190%
SET
WW
TT
100%100%100%
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 117 ページ 2012年2月14日 火曜日 午後5時10分
118 VQT4F46
Changing the playback settings and
playing back the slide show
Set to Playback mode. (l47)
1Select the item to set using the SET button and press
the SET button.
*1 These settings are only available when [ALL] or [PICTURE] has
been selected in [MODE].
*2
This setting is available when any type ([ALL]/[VIDEO]/[PICTURE])
has been selected in [MODE].
/
These settings are only available when [ALL] or [PICTURE] has
been selected in [MODE].
Advanced (Playback)
Various playback functions
[MENU]: # [SLIDESHOW] # desired setting
[MODE]:
Select the type ([ALL]/[VIDEO]/[PICTURE]) of the file to play back.
[SLIDES INTERVAL]*1:
Select the display interval for still picture playback.
[EFFECT SETUP]*1:
Select the effects for still picture playback.
[MUSIC SELECT]*2:
Select the music for still picture playback or playback of motion picture
recorded in Slow Motion Mode.
/
Select the music for still picture playback.
[START]:
Start the slide show.
1
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 118 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 119
2(On selecting [MODE])
Select the type of file to play back using the SET
button and press the SET button.
(On selecting [SLIDES INTERVAL])
Select an item using the SET button and press the
SET button.
(On selecting [EFFECT SETUP])
Select the desired effect using the SET button and
press the SET button.
[EFFECT SETUP] is disabled for the playback of panorama still
pictures.
(On selecting [MUSIC SELECT])
Select the desired music using the SET button and
press the SET button.
When you are playing back scenes/audio files, the audio of the scenes/
audio files is played back without music.
Playback of motion pictures recorded in Slow Motion Mode is
accompanied by music selected in [MUSIC SELECT].
3Select [START] using the SET button and press the
SET button.
Panorama still pictures are played back as follows.
jHorizontal panorama still picture: the playback scrolls from left to
right.
jVertical panorama still picture: playback scrolls from down to up.
To adjust the volume during a slideshow, operate the volume button
( / ) or volume lever ( ). (l66)
During playback, the slideshow will stop if you perform any operation
except operations on the volume button ( / ) or
volume lever ( ).
[SHORT]: approx. 1 second
[NORMAL]: approx. 5 seconds
[LONG]: approx. 15 seconds
HX-WA20
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 119 ページ 2012年2月14日 火曜日 午後5時10分
120 VQT4F46
Displaying file information
You can display the information of files recorded with the unit.
Set to Playback mode. (l47)
1Using the SET button, select file for which to display
information.
2Press and hold down the MENU button for 1 second
or more.
To make the information disappear, press the MENU button.
1Recording mode
Recording format
2Recording start time and date
3File number
4Protection setting
5File size
6Recording time
7Recording media
1Picture size
2Scene mode
3Color mode
4IRIS: Aperture
SHUTTER: Shutter speed
EXPOSE: Exposure correction
ISO: ISO sensitivity
5Recording start time and date
6File number
7Protection setting
8File size
9Recording media
HX-WA20PPPCPU-VQT4F46_mst.book 120 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 121
1Recording mode
Recording format
2Recording start time and date
3File number
4Protection setting
5File size
6Recording time
7Recording media
HX-WA20PPPCPU-VQT4F46_mst.book 121 ページ 2012年2月14日 火曜日 午後5時10分
122 VQT4F46
Set to Playback mode. (l47)
Select the menu. (l68)
Please refer to page 118.
Sets the playback volume for scene and audio files.
Tilt the SET button right or left and press the SET button.
Please refer to page 131 for details about protection setting.
Please refer to page 167 for details about selective forwarding.
Please refer to page 128.
You can rotate still pictures.
1 Select the still picture to rotate using the thumbnail screen.
Move the yellow frame over the still picture you wish to rotate.
Advanced (Playback)
Using the playback menu
[MENU]: or # desired setting
PLAYBACK MENU 1
[SLIDESHOW]
[PLAY VOLUME]
[PROTECT] or
[TRANSFER/PROTECT]
[DELETE]
[ROTATE]
1
2
1
HX-WA20PPPCPU-VQT4F46_mst.book 122 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 123
2 Select the menu.
To rotate another still picture, tilt the SET button left and right to select
a still picture, select [RIGHT] or [LEFT], and press the SET button.
3 Press the MENU button to complete the settings.
The still picture cannot be rotated if it has been protected. Turn off the
protection before the rotation operation. (l131)
You can reduce the size of the still picture and save as a new still picture.
1 Select the still picture to resize using the thumbnail screen.
Move the yellow frame over the still picture you wish to resize.
2 Select the menu.
The resized still picture is saved with a new image number.
Still picture with picture size of and panorama still picture cannot
be resized.
* Cannot be selected when the size of the original image is .
[MENU]: # [ROTATE] # [RIGHT] or [LEFT]
[RESIZE]
[MENU]: # [RESIZE] # desired setting
Size of original image Resize setting Size after resizing
///
/
///
1600k1200
640k480
///
/
///
*
1920k1080
1280k720
1
1
HX-WA20
HX-WA2
HX-DC2
HX-WA20
12
M
8.3
M
HX-WA2
HX-DC2
0.9
M
HX-WA20PPPCPU-VQT4F46_mst.book 123 ページ 2012年2月14日 火曜日 午後5時10分
124 VQT4F46
Corrects eye color when they appear red in still pictures (red-eye
phenomenon). When [SAVE AS NEW] is set, the still picture is saved
with a new image number.
1 Select the still picture to undergo red-eye correction using the
thumbnail screen.
Move the yellow frame over the still picture which is to undergo red-eye
correction.
2 Select the menu.
A correction confirmation screen appears. Check the correction
location, which is surrounded by a red frame, and press the SET
button.
3 Select the saving method and press the SET button.
Red-eye cannot be corrected in panorama still pictures or still pictures
recorded with [COLOR MODE] set to (HDR (Paint)).
Because the unit automatically corrects the portion it recognizes as
requiring correction, it may not always make the correction correctly.
You can cut unwanted sections from scenes. (scene splitting) You can
also splice multiple scenes together. (Scene splicing)
Splitting a scene
1 Select the scene to split using the thumbnail screen.
Move the yellow frame over the scene you wish to split.
PLAYBACK MENU 2
[RED-EYE CORRECT.]
[MENU]: # [RED-EYE CORRECT.] # [CORRECTION]
[SAVE AS NEW]: The corrected still picture is saved as a new still
picture.
[OVERWRITE]: The original still picture is deleted and only the
corrected still picture is saved.
[EDIT VIDEO]
2
2
HX-WA20PPPCPU-VQT4F46_mst.book 124 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 125
2 Select the menu.
3 Specify the starting position for the
scene.
Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using frame-by-frame playback.
The pause position will be the starting position of the scene.
If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
4 Tilt the SET button up.
5 Specify the end position for the scene.
The screen for specifying the end position of the scene appears.
Set the end position by performing the same operations as when
setting the start position.
The portions displayed in green are saved.
If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6 Press the button or the
recording start/stop button.
[MENU]: # [EDIT VIDEO] # [ (SPLIT)]
Play back With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.
Pause During playback, press the SET button.
Fast forward/
rewind
During playback, you can change the playback
speed by tilting the SET button right or left.
Frame-by-frame With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.
2
HX-WA20PPPCPU-VQT4F46_mst.book 125 ページ 2012年2月14日 火曜日 午後5時10分
126 VQT4F46
7 Select a saving method using the SET button and press the SET
button.
Scene splicing
1 Select the menu.
2 Move the yellow frame over the scenes you wish to splice and
press the SET button.
Scenes recorded using different recording
modes cannot be spliced.
The scenes you select for splicing are
assigned numbers.
You can continue selecting up to maximum
of 9 scenes.
The scenes are spliced in numerical order according to the assigned
numbers.
To cancel a selection, press the SET button again.
3 Press the button or the recording start/stop button.
4 Select a saving method using the SET button and press the SET
button.
[SAVE AS NEW]: The split scene is saved as a new scene.
[OVERWRITE]: The original scene is deleted and only the split
scene is saved.
[REVIEW CLIP]: The scene is played back in the split state.
[MENU]: # [EDIT VIDEO] # [(SPLICE)]
2
21
HX-WA20PPPCPU-VQT4F46_mst.book 126 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 127
Do not turn off the unit during motion picture editing process. If the unit
is turned off, there is a risk that the edited files and original files will be
lost.
When editing ends, the unit returns to thumbnail display.
If the total size of the file exceeds 4 GB, you cannot splice.
If the original scene is protected, you cannot overwrite it when saving.
Audio files cannot be split or spliced.
To adjust the volume during a playback review, operate the volume
button ( / ) or volume lever ( ). (l66)
When editing long motion pictures, the processing will take longer due
to the time it takes to process large files. When editing scenes on the
unit, make sure that the battery does not run out during the processing
by using a battery with sufficient charge on it or the AC adaptor.
For editing long scenes, we recommend using a PC (HD Writer VE
2.0).
It may not be possible to split short scenes.
The actual splitting point may differ slightly from the specified position.
Please refer to page 142.
Please refer to page 163.
[SAVE AS NEW]: The spliced scenes are saved as a new scene.
[OVERWRITE]: The spliced scene is saved by writing over the
file you initially selected.
[REVIEW CLIP]: The scene resulting from the splicing is played
back.
[COPY]
[UPLOAD SET]
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 127 ページ 2012年2月14日 火曜日 午後5時10分
128 VQT4F46
When an SD card is inserted, the files and folder on the SD card are
deleted. When not inserted, the files and folders in the built-in memory
are deleted.
Set to Playback mode. (l47)
Switch from thumbnail display to 1-file display. (l66)
1Select the file to delete using the SET button.
2Tilt the SET button up.
3Select [DELETE] using the SET button and press the
SET button.
Set to Playback mode. (l47)
1Select the menu.
Advanced (Playback)
Deleting scenes/still pictures/
audio files
Deleted scenes/still pictures/audio files cannot be restored, so
perform appropriate confirmation of the contents before
proceeding with deletion.
Deleting displayed file
Deleting multiple files at once
[MENU]: # [DELETE]
1
HX-WA20PPPCPU-VQT4F46_mst.book 128 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 129
2Using the SET button, select [DELETE SELECTED],
[DELETE ALL] or [DELETE FOLDER] and press the
SET button.
Deleting selected files
3(When [DELETE SELECTED] is selected in Step 2)
Select the file to delete using the SET button and
press the SET button.
will appear on the selected file. To cancel, press the SET button
again.
You can continue selecting up to maximum of 100 files.
4Press the button or the recording start/stop
button.
A delete confirmation screen appears.
5Select [YES] using the SET button and press the SET
button.
The selected files are deleted.
Deleting all files
3 (When [DELETE ALL] is selected in Step 2)
Select [DELETE] using the SET button and press the
SET button.
A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET
button.
All the files will be deleted.
HX-WA20PPPCPU-VQT4F46_mst.book 129 ページ 2012年2月14日 火曜日 午後5時10分
130 VQT4F46
Deleting a folder
3 (When [DELETE FOLDER] is selected in Step 2)
Select the folder to delete using the SET button and
press the SET button.
A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET
button.
A further confirmation screen appears. Select [YES] and press the SET
button to delete the folder.
Files which cannot be played back (the thumbnails are displayed as
) cannot be deleted.
The deletion may take time if there are many files.
If you delete scenes recorded on other products or still pictures
conforming to DCF standard with this unit, all the data related to the
scenes/still pictures may be deleted.
When still pictures recorded on an SD card by other products are
deleted, a still picture (other than JPEG) that cannot be played back on
this unit may be erased.
Files which are protected cannot be deleted. To delete a protected file,
first remove the protection and then delete. (l131)
HX-WA20PPPCPU-VQT4F46_mst.book 130 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 131
Protecting a file
Files can be protected so that they are not deleted by mistake. (Even if
you protect some files, formatting the media will delete them.)
Set to Playback mode. (l47)
1Select the menu.
* When you are using an Eye-Fi card which has already been set to
selective forwarding with a PC, [TRANSFER/PROTECT] is displayed.
2Select the file you wish to protect using the SET
button and press the SET button.
appears. To cancel the selection, press the SET button again.
is displayed on the thumbnail for 1 file. (l66)
3Press the MENU button to complete the settings.
[MENU]: # [PROTECT]*
1
HX-WA20PPPCPU-VQT4F46_mst.book 131 ページ 2012年2月14日 火曜日 午後5時10分
132 VQT4F46
Always use the supplied AV cable.
HDMI is the interface for digital devices. If you connect this unit to a
HDMI compatible high definition TV and then play back the recorded
high-definition images, you can enjoy them in high resolution with high
quality sound.
Turn down the volume before connecting.
1Connect this unit to a TV.
/
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible
with the terminals. Image quality may vary with the connected
terminals.
AHigh quality
1HDMI
terminal
2Video
terminal
HX-WA20
HX-WA2
HX-WA20PPPCPU-VQT4F46_mst.book 132 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 133
BHDMI micro cable (optional)
Be sure to connect to the HDMI terminal.
CAV cable (supplied)
Picture quality
1High-definition images when connecting to HDMI terminal
2Standard images when connecting to video terminal
Cables Reference items
BHDMI micro cable
(optional)
Connecting with an HDMI micro cable/
HDMI mini cable (l137)
Playback using VIERA Link (l138)
DHDMI mini cable (optional)
Be sure to connect to the HDMI terminal.
EAV cable (supplied)
Picture quality
1High-definition images when connecting to HDMI terminal
2Standard images when connecting to video terminal
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 133 ページ 2012年2月14日 火曜日 午後5時10分
134 VQT4F46
Check that the plugs are inserted as far as they go.
Do not use any other AV cables except the supplied one.
/
Always use a genuine Panasonic HDMI micro cable (RP-CHEU15:
optional).
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).
2Select the video input on the TV.
Example:
Select the [HDMI] channel with an HDMI micro cable ( /
)/HDMI mini cable ( ).
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
Check the input setting (input switch) and the audio input setting on the
TV. (For more information, please read the operating instructions for
the TV.)
3Play back from the unit
The volume cannot be adjusted on the unit. Please adjust the volume
on the TV.
Cables Reference items
DHDMI mini cable
(optional)
Connecting with an HDMI micro cable/
HDMI mini cable (l137)
Playback using VIERA Link (l138)
About the status indicator of the unit
While the unit is connected to a television, the status indicator lights
up in orange.
While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the HDMI micro cable ( / )/HDMI mini cable
( ) or remove the battery.
HX-WA20
HX-WA2
HX-DC2
HX-WA20 HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 134 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 135
About the video output
The video output destination varies depending on the status of
the unit.
: Output
—: No output
/
If the HDMI micro cable and AV cable are connected at the same time,
output will be prioritized in order of the HDMI micro cable, AV cable.
If the HDMI mini cable and AV cable are connected at the same time,
output will be prioritized in order of the HDMI mini cable, AV cable.
Connection
cable Video output
destination
TV
SYSTEM
(
l
137)
Recording mode
Playback
mode
Standing
by
Recording
AV cable
(supplied)
LCD monitor
of the unit
NTSC
PAL
TV NTSC
PAL —
/
HDMI micro
cable
(optional)
HDMI mini
cable
(optional)
LCD monitor
of the unit
NTSC
PAL
TV
NTSC
PAL
HX-WA20 HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 135 ページ 2012年2月14日 火曜日 午後5時10分
136 VQT4F46
To watch images on a regular TV (4:3) or when both
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV
setting.)
Example of images with a [16:9] aspect ratio on a regular TV (4:3)
If a wide-screen TV is connected, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for details.)
[MENU]: # [TV OUTPUT] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
Refer to the following support site for information about
Panasonic TVs with an SD card slot for playing back your
pictures.
http://panasonic.net/
For details on how to play back, please read the operating
instructions for the TV.
2
HX-WA20PPPCPU-VQT4F46_mst.book 136 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 137
Connecting with an HDMI micro cable/
HDMI mini cable
Select the desired method of HDMI output.
[AUTO] determines the output resolution automatically based on
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO],
switch to the method [720p], [1080i] or [480p] which enables the
images to be displayed on your TV. (Please read the operating
instructions for the TV.)
TV format setting
Set the format of the video signal output from the USB/AV connector.
[MENU]: # [TV OUTPUT] # [HDMI] #
[AUTO]/[720p]/[1080i]/[480p]
[MENU]: # [TV OUTPUT] # [TV SYSTEM] # [NTSC] or [PAL]
[NTSC]: Outputs NTSC video signals.
[PAL]: Outputs PAL video signals.
2
2
HX-WA20PPPCPU-VQT4F46_mst.book 137 ページ 2012年2月14日 火曜日 午後5時10分
138 VQT4F46
Set to Playback mode. (l47)
1Select the menu.
If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with
VIERA Link
.
/
Connect with an HDMI micro cable.
Connect with an HDMI mini cable.
Advanced (Playback)
Playback using VIERA Link
What is the VIERA Link (HDAVI Control)?
VIERA Link is a new name for EZ Sync.
This function allows you to use your remote control for the
Panasonic TV for easy operations when this unit has been
connected to a VIERA Link compatible device using an HDMI micro
cable (optional)/HDMI mini cable (optional) for automatic linked
operations. (Not all operations are possible.)
VIERA Link is a unique Panasonic function built on an HDMI control
function using the standard HDMI CEC (Consumer Electronics
Control) specification. Linked operations with HDMI CEC compatible
devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible
with VIERA Link, refer to the operating instructions for the respective
devices.
This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is
the newest Panasonic version and is also compatible with existing
Panasonic VIERA Link devices. (As of Nov 2011)
[MENU]: # [TV OUTPUT] # [VIERA Link] # [ON]
2
HX-WA20 HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 138 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 139
/
AHDMI micro cable (optional)
BHDMI mini cable (optional)
1Panasonic TV compatible with VIERA Link
It is recommended to connect this unit to an HDMI terminal other than
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
VIERA Link must be activated on the connected TV. (Read the
operating instructions for setting the TV etc.)
/
Always use a genuine Panasonic HDMI micro cable (RP-CHEU15:
optional).
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).
HX-WA20
HX-WA2
HDMI IN
HX-DC2
HDMI IN
HX-WA20 HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 139 ページ 2012年2月14日 火曜日 午後5時10分
140 VQT4F46
3Operate with the remote control for the TV.
1) Press the button up, down, left, or right to select a scene or still
picture to be played back, and then press the button in the center to
set it.
2) Activate the operation icons that are displayed on TV screen with the
remote control for the TV.
AOperation icons
BDisplay operation icons
CCancel operation icons
Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with an HDMI micro cable ( / ) or an
HDMI mini cable ( ) and then turn on this unit, the input channel
on the TV automatically switches to this unit’s screen. If the TV’s power is
in standby status, it will turn on automatically (if [Set] has been selected
for the TV’s [Power on link] setting).
Depending on the HDMI terminal on the TV, the input channel may not
switch automatically. In this case, use the remote control for the TV to
switch the input channel.

1) 2)
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 140 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 141
If you are unsure whether or not the TV and AV amplifier you are using
are compatible with VIERA Link, read the operating instructions for the
devices.
Available linked operations between this unit and a Panasonic TV is
different depending on the types of Panasonic TVs even if they are
compatible with VIERA Link. Refer to the operating instructions of the
TV for the operations that support on the TV.
Operation is not possible with a cable that is not based on the HDMI
standard.
HX-WA20PPPCPU-VQT4F46_mst.book 141 ページ 2012年2月14日 火曜日 午後5時10分
142 VQT4F46
Files recorded using the unit can be copied from the built-in memory to
an SD card inserted into the unit.
1Set to Playback mode. (l47)
Be sure to use a sufficiently charged battery or the AC adaptor.
2Select the menu.
3(On selecting [COPY SELECTED])
Select the file to copy using the SET button and
press the SET button.
will appear on the selected file. To cancel, press the SET button
again.
You can continue selecting up to maximum of 100 files.
Press the MENU button to return to the previous step.
(On selecting [COPY ALL])
Select [COPY ALL] to begin copying to the SD card.
4(On selecting [COPY SELECTED])
Press the recording start/stop button or the
button.
When the copying ends, the unit returns to the playback menu.
Copy/Dubbing
Copying from Built-in Memory to
SD card
Copying
[MENU]: # [COPY] # desired setting
[COPY SELECTED]:
Copies the selected file to the SD card.
[COPY ALL]:
Copies all files recorded in the built-in memory to the SD card.
2
HX-WA20PPPCPU-VQT4F46_mst.book 142 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 143
You cannot change the order of the files that are to be copied.
You can dub by connecting an AV cable.
Be sure to use a sufficiently charged battery.
Images are dubbed in standard quality.
Set to Playback mode. (l47)
If you intend to delete the original file when the copying has
finished, always play back the copied file before deletion to
confirm that the original has been copied normally.
Copy/Dubbing
Dubbing images onto other video
devices
Change the video input
on the video device and
TV that this unit is
connected to.
The channel set will differ
depending on the terminal to
which the unit is connected.
See the operating
instructions of the video
device for details.
Insert the plugs as far as
they will go.
Do not use any other AV
cables except the supplied
one.
AAV cable (supplied)
HX-DC2
HX-WA2HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 143 ページ 2012年2月14日 火曜日 午後5時10分
144 VQT4F46
1Connect the unit to the recording equipment and
begin playback on the unit.
If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in playback mode. Check on
the TV screen instead.
2Start recording on the connected device.
To stop recording (dubbing), stop playback on this unit after stopping
recording on the recorder.
Even when [DISPLAY] is set to [OFF], the battery icon will be displayed
if the battery runs low. Be sure to use a battery which has been
charged sufficiently.
If the date and time display and function indication are not wanted,
cancel them before dubbing. (l71)
If the dubbed images are played back on a wide-screen TV, the
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are
connecting to or read the operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
HX-WA20PPPCPU-VQT4F46_mst.book 144 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 145
HD Writer VE 2.0
You can copy the motion/still picture data to the HDD of PCs or write to
media such as Blu-ray discs, DVD discs or SD cards using HD Writer VE
2.0, which is the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer VE 2.0 (PDF file) for
details on how to use it.
Scenes edited using the HD Writer VE 2.0 can be played back on the
unit. Note, however, that such scenes cannot be edited on the unit.
Smart wizard
The Smart wizard screen is automatically displayed when you connect
this unit to a PC with HD Writer VE 2.0 installed. (l155)
Select the function you wish to use and follow the on-screen
instructions for easy copying.
With a PC
What you can do with a PC
Copy to PC: You can copy motion/still picture data to the HDD
of PCs.
Copy to disc: You can copy to disc in high-definition picture
quality or conventional standard picture quality
(MPEG2 format).
HX-WA20PPPCPU-VQT4F46_mst.book 145 ページ 2012年2月14日 火曜日 午後5時10分
146 VQT4F46
It is possible to play back still pictures on a PC using an image viewer
standard to Windows or commercially available image browsing
software, and copy still pictures to a PC using Windows Explorer.
Please refer to page 162 for details about using a Mac.
Important Notice
When using an SDXC Memory Card, check the following
support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
When inserting a disc containing recorded motion pictures into
other devices, a message prompting you to format the disc may
be displayed. Do not format the disc, since deleted data cannot
be restored later.
What can be done with the HD Writer VE 2.0 Data
type
Copying data to a PC
Motion
picture
and still
picture
Copying to a Blu-ray disc
Motion pictures are converted to high-definition (H.264)
motion pictures.
Motion pictures recorded using / cannot be
copied.
Motion pictures recorded using / cannot be
copied.
Copying in DVD-Video format:
Converted to conventional standard quality (MPEG2
format).
Motion
picture
Editing:
Editing motion picture data copied on an HDD of a PC
Title, Transition, Delete partially, Dividing
Converting part of motion picture into still picture
Online sharing:
You can upload motion picture data on the Internet and
share them with your family and friends.
Playing back on a PC:
Play back the motion picture data in high-definition picture
quality on a PC.
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 146 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 147
Data cannot be written to the unit from a PC.
Motion pictures that have been recorded on another device
cannot be written to the software supplied with this unit.
Audio files cannot be handled.
When motion picture data is written to and read from the SD card,
correct operation cannot be guaranteed with software other than that
supplied with the unit.
Do not start the software supplied with this unit and other software at
the same time. Close any other software if you start the software
supplied with this unit and close the software supplied with this unit if
you start any other software.
HX-WA20PPPCPU-VQT4F46_mst.book 147 ページ 2012年2月14日 火曜日 午後5時10分
148 VQT4F46
End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the Software defined in this
End User License Agreement (“Agreement”) on condition that you agree
to the terms and conditions of this Agreement.
Article 1 License
Licensee is granted the right to use the software, including the
information recorded or described on the CD-ROM, instruction manuals,
and any other media provided to Licensee (collectively “Software”), but
all applicable rights to patents, copyrights, trademarks and trade secrets
in the Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer, rent, lease, lend or allow
any third party, whether free of charge or not, to use, copy or modify the
Software, except as expressly provided for in this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the Software in whole or a part
solely for back-up purpose.
Article 4 Computer
Licensee may use the Software only on one computer, and may not use it
on more than one computer. Further, Licensee may not use the Software
for commercial software hosting services.
Article 5 Reverse Engineering, Decompiling or Disassembly
Licensee may not reverse engineer, decompile, or disassemble the
Software, except to the extent either of them is permitted under law or
regulation of the country where Licensee resides. Panasonic, or its
distributors will not be responsible for any defects in the Software or
damage to Licensee caused by Licensee’s reverse engineering,
decompiling, or disassembly of the Software.
HX-WA20PPPCPU-VQT4F46_mst.book 148 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 149
Article 6 Indemnification
The Software is provided “AS-IS” without warranty of any kind, either
expressed or implied, including, but not limited to, warranties of
non-infringement, merchantability and/or fitness for a particular purpose.
Further, Panasonic does not warrant that the operation of the Software
will be uninterrupted or error free. Panasonic or any of its distributors will
not be liable for any damage suffered by Licensee arising from or in
connection with Licensee’s use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any country the Software in
any form without the appropriate export licenses under regulations of the
country where Licensee resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be automatically terminated
if Licensee contravenes any of the terms and conditions of this
Agreement. In this event, Licensee must destroy the Software and
related documentation together with all the copies thereof at Licensee’s
own expense.
Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5
produced by Microsoft Corporation
(1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5
only when included in the Software, and shall not use the MICROSOFT
SQL SERVER COMPACT 3.5 in any other configuration or method.
Licensee shall not publish the MICROSOFT SQL SERVER COMPACT
3.5 or work around any technical limitations in the MICROSOFT SQL
SERVER COMPACT 3.5.
(2) Licensee shall not use, copy, distribute, regrant for use or otherwise
handle the Software in any way beyond the range of use granted under
Article 9 (1), and shall not conduct operations such as reverse
engineering, decompilation, disassembling, etc. of the MICROSOFT SQL
SERVER COMPACT 3.5.
(3) All rights, including copyright, patent rights etc. relating to the
MICROSOFT SQL SERVER COMPACT 3.5 shall belong to Microsoft
Corporation. Licensee shall not claim any rights related to the
MICROSOFT SQL SERVER COMPACT 3.5 whatsoever.
HX-WA20PPPCPU-VQT4F46_mst.book 149 ページ 2012年2月14日 火曜日 午後5時10分
150 VQT4F46
Even if the system requirements mentioned in this owner’s manual are
fulfilled, some PCs cannot be used.
A CD-ROM drive is necessary to install the supplied software
applications. (A compatible Blu-ray disc/DVD writer drive and media
are necessary for writing to a Blu-ray disc/DVD.)
Operation is not guaranteed in the following cases.
j
When 2 or more USB devices are connected to a PC, or when devices
are connected through USB hubs or by using extension cables.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
This software is not compatible with Microsoft Windows 3.1,
Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT
and Windows 2000.
Operating environment for HD Writer VE 2.0
With a PC
Operating environment
PC IBM PC/AT compatible PC
OS Windows 7 (32 bit/64 bit) Starter/Home Basic/
Home Premium/Professional/Ultimate (SP1)
Windows Vista (32 bit) Home Basic/Home Premium/
Business/Ultimate (SP2)
Windows XP (32 bit) (SP3)
CPU Intel Pentium 4 2.8 GHz or higher
(including compatible CPU)
Intel Core 2 Duo 2.16 GHz or higher or
AMD Athlon 64 X2 Dual-Core 5200+ or higher is
recommended when using the playback function.
Intel Core 2 Quad 2.6 GHz or higher is
recommended when using the editing function.
Intel Core i7 2.8 GHz or higher is recommended
when copying to Blu-ray discs.
HX-WA20PPPCPU-VQT4F46_mst.book 150 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 151
Supplied CD-ROM is available for Windows only.
Input is not supported in languages other than English, German,
French, Simplified Chinese and Russian.
Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
Operation is not guaranteed on Microsoft Windows Vista Enterprise,
Windows XP Media Center Edition, Tablet PC Edition and Windows 7
Enterprise.
This software is not compatible with a multi-boot environment.
This software is not compatible with a multi-monitor environment.
RAM
Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)
Display High Color (16 bit) or more (32 bit or more
recommended)
Desktop resolution of 1024k768 pixels or more
(1920k1080 pixels or more recommended)
Windows 7/Windows Vista: DirectX 9.0c compatible
video card (DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Expressk16 compatible recommended
Video memory of 256 MB or more recommended
Free hard
disk drive
space
Ultra DMA — 100 or higher
Available hard disk capacity of 450 MB or more for
installation
When writing to DVD/Blu-ray disc/SD, at least twice
the amount of free disk space as the disc or card
being created is necessary.
Sound DirectSound Support
Interface USB port [Hi-Speed USB (USB 2.0)]
Other
requirements
Mouse or equivalent pointing device
Internet connection
HX-WA20PPPCPU-VQT4F46_mst.book 151 ページ 2012年2月14日 火曜日 午後5時10分
152 VQT4F46
If using Windows XP, only an administrative account user can use this
software. If using Windows Vista/Windows 7, only administrative and
standard account users can use this software. (An administrative
account user should install and uninstall this software.)
To use the HD Writer VE 2.0
You will need a high performance PC depending on the functions to be
used. It may not properly play back or properly operate depending on the
environment of the PC used. Refer to the operating environment and
notes.
Operation during the playback may become slow if the CPU or memory
is not fulfilling the requirements of the operating environment.
Always use the most current driver for the video card.
Always make sure there is enough capacity on the HDD in the PC. It
may become inoperable or the operation may stop suddenly if the
capacity gets low.
HX-WA20PPPCPU-VQT4F46_mst.book 152 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 153
Operating environment for the card reader function
(mass storage)
The USB equipment operates with the driver installed as standard in
the OS.
PC IBM PC/AT compatible PC
OS Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)
CPU Windows 7/Windows Vista: 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor (including
compatible CPU)
Windows XP: Intel Pentium III 450 MHz or higher or
Intel Celeron 400 MHz or higher
RAM Windows 7: 1 GB or more (32 bit)/2 GB or more
(64 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/
Enterprise: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)
Interface USB port
Other
requirements
Mouse or equivalent pointing device
HX-WA20PPPCPU-VQT4F46_mst.book 153 ページ 2012年2月14日 火曜日 午後5時10分
154 VQT4F46
When installing the software, log on to your computer as the
Administrator or with a user name with equivalent authorization. (If you
do not have authorization to do this, consult your manager.)
Before starting the installation, close all applications that are running.
Do not perform any other operations on your PC while the software is
being installed.
Explanation of operations is based on Windows 7.
1Insert the CD-ROM into the PC.
The [AutoPlay] screen is displayed automatically. Click [Run setup.exe]
# [Yes].
If Windows 7 is in use, or the [AutoPlay] screen is not displayed
automatically, select [Start] # [Computer] (or double-click on
[Computer] on the desktop), and then double-click [Panasonic].
2Click [Yes].
Operate following the instruction on the screen.
Select [NTSC Area] when the country or region of your residency is not
displayed in the selection screen for the country or region.
Uninstalling HD Writer VE 2.0
Follow the steps below to uninstall any software applications that you no
longer require.
1Select [Start] # [Control Panel] # [Uninstall a
program].
2Select [HD Writer VE 2.0], then click [Uninstall].
Proceed with the uninstallation by following the on-screen instructions.
After uninstalling the software, be sure to reboot the PC.
With a PC
Installation
The PC must be rebooted for the application to work.
HX-WA20PPPCPU-VQT4F46_mst.book 154 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 155
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
Insert the plugs as far as they will go.
1Turn on the unit.
Be sure to use a sufficiently charged battery.
This function is available in all modes.
2Connect this unit to a PC.
The USB function selection screen will appear.
3Select the desired connection mode using the SET
button and press the SET button.
With a PC
Connecting to a PC
[CARD READER]: The unit works as an external drive for the PC.
(Card reader mode) (l156)
[WEB CAMERA]: The unit works as a web camera. (Web camera
mode) (l159)
HX-WA2HX-WA20
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 155 ページ 2012年2月14日 火曜日 午後5時10分
156 VQT4F46
To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click
[Eject Panasonic Camcorder].
Depending on your PC’s settings, this icon may not be displayed.
Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
When this unit is connected to a PC using a USB cable while the unit is
turned on, power is also supplied from the PC to this unit.
When performing reading/writing between a PC and an SD card, be
aware that some SD card slots built into PCs and some SD card
readers are not compatible with the SDHC Memory Card or SDXC
Memory Card.
When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Use as a card reader
Connect the unit to a PC and set the unit to card reader
mode. (l155)
The LCD monitor will turn off.
The Smart wizard screen is automatically displayed when HD Writer
VE 2.0 is installed.
This unit is automatically recognized as an external drive of the PC.
(l157)
File is read from the SD card if one is inserted or the built-in memory if
no SD card is inserted.
When you select an option other than [CARD READER], reconnect the
USB cable.
About the status indicator of the unit
While the unit is connected to a PC, the status indicator lights up in
green.
While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the USB cable or remove the battery.
HX-WA20PPPCPU-VQT4F46_mst.book 156 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 157
About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
Removable disk (Example: ) is displayed in
[Computer].
Example folder structure in built-in memory/SD card:
The following data will be recorded.
1Up to 999 files of motion pictures/still pictures/audio files can
be recorded in a single folder.
If you record further images/audio, a 101CDPFP folder is
created and the files are stored in this new folder. The folders
are numbered 102CDPFP, 103CDPFP...and so on.
2Recorded scenes
3JPEG format pictures
4Recorded audio
5(SD card (CAM_SD) only)
The upload tool (HD Writer Web Uploader) is automatically copied to
the SD card when WEB upload setting (l163) is performed.
We recommend using HD Writer VE 2.0 to copy motion picture data.
Using Windows Explorer or other programs on the PC to copy, move
or rename files and folders recorded with this unit will result in them
being unusable with HD Writer VE 2.0.
It is impossible to write data to the built-in memory or SD card on this
unit from a PC.
DCIM
CAM_SD/CAM_MEM
IMGA0003.M4A
IMGA0002.JPG
IMGA0001.MP4
100CDPFP
AD_HDWUP
HX-WA20PPPCPU-VQT4F46_mst.book 157 ページ 2012年2月14日 火曜日 午後5時10分
158 VQT4F46
Copying your still pictures to your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be copied to the PC with Explorer
or other programs.
1 Double click the folder that contains the still pictures. ([DCIM] #
[100CDPFP] etc.)
2 Drag and drop the still pictures onto the destination folder (on
the PC’s HDD).
Do not delete the SD card’s folders. Doing so may make the SD card
unusable in this unit.
When data not supported by this unit has been recorded on a PC, it will
not be recognized by this unit.
Always use this unit to format SD cards.
Charging the battery by connecting it to different
devices
If you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder using a USB cable, the battery will
charge.
Insert the USB cable securely all the way. It will not operate properly if
it is not inserted all the way.
Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or
DVD recorder.
If you do not intend to use the unit for an extended period, disconnect
the USB cable from the unit for safety.
During charging, the status indicator flashes red.
If the status indicator flashes fast and then goes off or stays off,
charging will not be possible. Charge by using the AC adaptor. (l34)
It will take 2 or 3 times longer to charge compared to when using the
AC adaptor.
If the status indicator flashes at a particularly fast or slow rate, refer to
page 186.
HX-WA20PPPCPU-VQT4F46_mst.book 158 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 159
Using the unit as a web camera
When the unit is connected to a PC that is connected to the Internet, the
unit can be used as a web camera.
Operation cannot be guaranteed on every PC having the
recommended environment.
Not compatible with Microsoft Windows 3.1, Windows 95, Windows 98,
Windows 98SE, Windows Me, Windows NT and Windows 2000.
Operation is not guaranteed in the following cases.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
PC
IBM PC/AT compatible PC Mac
Necessary
software
Windows Live Messenger iChat
OS Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)
Mac OS X
10.7.2
CPU
Windows 7/Windows Vista: 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor
(including compatible CPU)
Windows XP: Intel Pentium
III
450 MHz or
higher or Intel Celeron 400 MHz or higher
Intel Core 2
Duo or better
RAM Windows 7: 1 GB or more (32 bit)/
2 GB or more (64 bit)
Windows Vista Home Basic:
512 MB or more
Windows Vista Home Premium/
Business/Ultimate/Enterprise:
1 GB or more
Windows XP: 512 MB or more (1 GB or
more recommended)
2GB or
more
Interface USB port
Other
requirements
Mouse or equivalent pointing device
HX-WA20PPPCPU-VQT4F46_mst.book 159 ページ 2012年2月14日 火曜日 午後5時10分
160 VQT4F46
1Connect the unit to a PC and set the unit to web
camera mode. (l155)
The LCD monitor will turn off.
If you touch anything other than [WEB CAMERA], remove and then
reconnect the USB cable.
2(On the PC)
Start Windows Live Messenger or iChat.
Check that the unit has been selected in the Windows Live Messenger
or iChat settings.
When disconnecting the USB cable from your PC, please close
Windows Live Messenger or iChat before disconnecting.
After 12 hours, the unit is automatically turned off.
In web camera mode, the following functions are disabled.
j[DIGITAL ZOOM], [i.ZOOM], [FACE CHASER], [E.I.S.(VIDEO)] and
[E.I.S.(PICTURE)]
In web camera mode, although the unit can record up to 30 frames per
second, this rate may drop due to network conditions and PC
processing speed.
Operation cannot be guaranteed on all devices having a USB terminal.
HX-WA20PPPCPU-VQT4F46_mst.book 160 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 161
To use the software, log on as an Administrator or as user name for
standard user account (only for Windows 7/Windows Vista).
The software cannot be used with the user name for a guest account.
(On the PC)
Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 2.0] # [HD Writer VE].
For details on how to use the software applications, read the PDF
operating instructions of the software.
Reading the operating instructions of the
software applications
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0
or later to read the PDF operating instructions.
Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 2.0] # [Operating Instructions].
With a PC
Starting HD Writer VE 2.0
HX-WA20PPPCPU-VQT4F46_mst.book 161 ページ 2012年2月14日 火曜日 午後5時10分
162 VQT4F46
HD Writer VE 2.0 is not available for Mac.
iMovie’11 supported. For details about iMovie’11, please contact
Apple Inc.
You cannot acquire scenes recorded in Slow Motion Mode (
l
81) to Mac.
Operating environment
Even if the system requirements mentioned in this owner’s manual are
fulfilled, some PCs cannot be used.
The USB equipment operates with the driver installed as standard in
the OS.
Supplied CD-ROM is available for Windows only.
Copying still pictures on PC
1Connect this unit to a PC via the supplied USB cable.
The USB function selection screen will appear.
2Select [CARD READER] using the SET button on the
unit, and press the SET button.
The LCD monitor will turn off.
This unit is automatically recognized as an external drive of Mac.
If you select anything other than [CARD READER], remove and then
reconnect the USB cable.
3Double click on the [CAM_SD] or [CAM_MEM]
displayed on the desktop.
Files are stored in [100CDPFP] folder etc. in the [DCIM] folder.
With a PC
If using Mac
PC Mac
OS Mac OS X 10.7.2
CPU Intel Core 2 Duo or better
RAM 2 GB or more
Interface USB port
Other
requirements
Mouse or equivalent pointing device
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 162 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 163
4Using a drag-and-drop operation, move the pictures
you want to acquire or the folder storing those
pictures to any different folder on the PC.
To disconnect USB cable safely
Drag [CAM_SD] or [CAM_MEM] disk icon to the [Trash], and then
disconnect the USB cable.
Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
When you connect the unit to a PC that is connected to the Internet, you
can easily upload files recorded on the SD card to YouTube or Facebook.
Insert the SD card.
Set to Playback mode. (l47)
1Select the menu.
2Select the file to upload using the SET button and
press the SET button.
will appear on the selected file. To cancel, press the SET button
again.
You can continue selecting up to maximum of 20 files.
Copy files recorded to the built-in memory to the SD card before
configuring the settings.
On configuring the settings, the upload tool built into the unit
(HD Writer Web Uploader) is automatically copied to the SD card.
With a PC
Uploading files to a web service
[MENU]: # [UPLOAD SET] # [SELECT]
2
HX-WA20PPPCPU-VQT4F46_mst.book 163 ページ 2012年2月14日 火曜日 午後5時10分
164 VQT4F46
3Press the recording start/stop button or the
button.
To cancel all selections, press the MENU button, select
[CANCEL ALL], and press the SET button.
4Connect the unit to the PC using the USB cable.
AUSB cable (supplied)
Insert the plugs as far as they will go.
Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
Removable disk (Example: ) is displayed in
[Computer].
5Select [CARD READER] using the SET button and
press the SET button.
6Open the removable disk that appears in [Computer].
7Double-click [HDWWEBUP.EXE] in the [AD_HDWUP]
folder.
The HD Writer Web Uploader will start.
HX-WA2HX-WA20
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 164 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 165
8Select an upload destination.
For subsequent operations, please read the operating instructions
(PDF) of the HD Writer Web Uploader.
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0
or later to read the PDF operating instructions.
Audio files cannot be handled.
When using the Eye-Fi card, the web upload function is disabled.
Operation cannot be guaranteed on future YouTube and Facebook
services and updates. The service content and screens which can be
used are subject to change without prior notice. (The service is
currently available (February 1st 2012))
Do not upload images protected by copyright unless you hold the
copyright or you have obtained permission from the relevant copyright
holder.
HX-WA20PPPCPU-VQT4F46_mst.book 165 ページ 2012年2月14日 火曜日 午後5時10分
166 VQT4F46
By using the Eye-Fi card, you can save files recorded on a card to a PC
or file-sharing site via a wireless network.
The functions of the Eye-Fi card (including wireless transmission) are
not guaranteed to work on this product. In the case of a malfunction of
the card, please contact the card manufacturer.
To use the Eye-Fi transfer feature, a broadband wireless LAN
environment is required.
To use the Eye-Fi card, permission from the national or regional
government is required. Do not use if you have not obtained
permission. If you are unsure as to whether use is permitted, please
check with the card manufacturer.
Install the software supplied with the Eye-Fi card in advance on
your PC, and configure the Eye-Fi settings. (For settings methods
etc., please read the card operating instructions or consult the
card manufacturer)
Select the menu.
When [TRANSFER] is set to [ON], the transferable files will be
transferred automatically.
To cancel the forwarding of a file, turn off the unit or set [TRANSFER]
to [OFF].
The setting at the time of purchase is [OFF]. Every time the Eye-Fi card
is removed from the unit, this setting is set to [OFF].
You can check the transfer of the file on the thumbnail screen (8-file
display).
With a PC
Using the Eye-Fi transfer feature
[MENU]: # [Eye-Fi] # [TRANSFER] # [ON]
File has been transferred
File waiting for transfer
File cannot be transferred
3
HX-WA20PPPCPU-VQT4F46_mst.book 166 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 167
Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
Install the software supplied with the Eye-Fi card on your PC, and
configure the Direct Mode settings.
Select the menu.
If any of the following operations is performed, the Direct Mode will be
canceled.
jIf you turn the unit off
jClosing the LCD monitor, sending the unit into standby mode.
jStarting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other
than the above.
In Direct Mode, the economy mode function (l45) is disabled.
When [TRANSFER] (l166) is set to [OFF], [START DIRECT MODE]
cannot be selected.
Selecting files to transfer
If you perform the required settings in advance on your PC, you can
transfer selected files alone. For settings methods etc., please read the
card operating instructions or consult the card manufacturer.
Install the software supplied with the Eye-Fi card on your PC, and
configure the selection transfer settings.
Select the menu.
The settings method is the same as for the protect settings. (l131)
For the files set for selected transfer, is displayed on the
thumbnail screen (1-file display).
If you have not performed selected transfer settings on your PC,
[PROTECT] is displayed and the selection transfer setting is disabled.
[MENU]: # [Eye-Fi] # [START DIRECT MODE]
[MENU]: # [TRANSFER/PROTECT]
3
1
HX-WA20PPPCPU-VQT4F46_mst.book 167 ページ 2012年2月14日 火曜日 午後5時10分
168 VQT4F46
When the write protect switch on the Eye-Fi card is on the LOCK side,
[PROTECT] is displayed and selected transfer setting is disabled.
Please unlock the write protect switch.
The protect setting is also applied to the files for which [TRANSFER/
PROTECT] is set. To delete or rotate a file, first cancel [TRANSFER/
PROTECT] and then perform the operation.
The [Eye-Fi] menu only appears when an Eye-Fi card is used.
The Eye-Fi transfer feature cannot be guaranteed to continue to
operate in the future due to changes to the card specification etc.
Update the firmware of the Eye-Fi card to the latest one using the
software supplied with the Eye-Fi card before use.
Eye-Fi transfer is terminated when it goes into sleep mode by the
energy-saving function during the Eye-Fi transfer. Connect the AC
adapter and set the [AC:REC/PLAY] in [ECONOMY] to [60 min].
(l71) (Energy-save function will be disabled during the Direct Mode)
When the endless memory function of the Eye-Fi card is set to on, the
files transferred from the card may be deleted automatically.
The Eye-Fi card may heat up as a result of the files being transferred.
When the Eye-Fi card is used, the battery will run down faster.
Audio files cannot be handled.
The [Eye-Fi] setting can be checked from the recording standby screen
or the thumbnail screen (1-file display).
When using the Eye-Fi card, please be sure to unlock the write-protect
switch. (l40)
Files cannot be transferred during motion picture recording or audio recording.
Before deleting the files, please confirm they have been transferred to
your PC and uploaded to the sharing site.
Do not use the Eye-Fi card in locations where the use of wireless
devices is forbidden, such as inside aircraft etc.
Depending on network conditions, the transfer may take some time.
Also, if network conditions deteriorate, the transfer may be suspended.
Files over 2 GB in size cannot be transferred. Such files should first be
split to reduce the file size. (l124)
In [Eye-Fi], [TRANSFER] is set to [ON]
(Transferring in Direct Mode)
In [Eye-Fi], [TRANSFER] is set to [ON]
In [Eye-Fi], [TRANSFER] is set to [OFF]
HX-WA20PPPCPU-VQT4F46_mst.book 168 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 169
Recording indications
Others
LCD Display Indications
A
(White) Still picture recording icon
(Red) Recording still picture
During burst recording (l83)
// //////
/
// //////
Number of recording pixels for still pictures (l90, 115)
In Playback Mode, the picture size is not displayed for still pictures
recorded with other products that have different picture sizes from the
sizes shown above.
///
/
///
Burst recording (l83)
/Panorama recording (l85)
000:00:15
000:00:15
000:00:15
MF
3000
3000
3000
ISO400
ISO400
ISO400
F3.5
F3.5
F3.5
1/30
1/30
1/30
HX-WA20
12
M
8.3
M
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 169 ページ 2012年2月14日 火曜日 午後5時10分
170 VQT4F46
3000 Remaining number of still pictures (l56)
High temperature warning (l46)
ßA/ß/Flash (l96)
Camera shake warning (l57)
//////////*
1//*
2/
Scene Mode (l90)
*1 only
*2 / only
/////
Color mode (l99)
ISO50/ISO100/ISO200/ISO400/ISO800/ISO1600/ISO3200*3
ISO sensitivity (l100)
*3 only
////////
Intelligent Auto Mode (l61)
//
Exposure (l101)
F3.5 Iris value (l56, 110)
1/30 Shutter Speed (l56, 110)
/
/
Zoom/Double range zoom (l77)
B
// Eye-Fi settings (l168)
(Gray)
(Red)
Audio recording icon
Recording audio
Focus mark (l98)
Spot metering target (l98)
Zoom unavailable icon (l82)
HX-WA20
HX-WA20
HX-WA2
HX-WA20
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 170 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 171
Playback indications
C
///
//
Recording Mode (l89)
/
Slow Motion Mode (l81)
(White)
(Red)
Motion picture recording icon
Recording motion picture
μ (Red) Recording motion picture (l53)
Recording audio (l60)
000:00:15 Recording time elapsed (l53, 60)
Approximate remaining recordable time (l53,
60)
AF Lock (l105)
AE Lock (l105)
Ø10/Ø2Self-timer Recording (l97)
Card recording possible status
Built-in memory recording possible status
// Image Stabilizer (l80)
/MF/ Focus (l112)
Remaining battery power (l37)
1/;/5/6/D/EDisplay during playback (l65, 113)
00:00:30 Playback Time (Motion picture)
000:00:30 Playback Time (Audio)
DEC 15 2012 3:30PM Recording date and time
DEC 15 2012 Recording date
100-0001 Folder/file name
Motion picture file
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 171 ページ 2012年2月14日 火曜日 午後5時10分
172 VQT4F46
Confirmatory indications
Audio file
Files for which selected transfer/protect is set
(l131, 167)
Face detection (l102)
/Panorama still picture (l85)
// Eye-Fi transfer status (l166)
/Files exceeding 4 GB in size (l67)
Remaining battery power (l37)
Files which cannot be played back
––– –– –––– ––:––––
(Time display)
The built-in battery is low. (l49)
Incompatible SD card is used.
HX-WA20PPPCPU-VQT4F46_mst.book 172 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 173
Major confirmation/error messages to be indicated on the screen in text.
It is not a malfunction in following cases
Others
Messages
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this indication appears despite motion pictures, still pictures and
audio being recorded on the SD card, the SD card may be in an
unstable state. Re-insert the SD card and turn the unit off and on
again.
CARD FULL.
Built-in Memory full.
There is no space on the SD card or in built-in memory. Please delete
unneeded files or use an SD card with space on it.
Card is protected
The write protection switch on the SD card is in the LOCK position.
Please unlock the write protect switch. (l40)
Others
Troubleshooting
Object seems to be
warped.
Object seems to be warped slightly when the
object moves across the image very fast, but
this is because the unit is using MOS for the
image sensor. This is not a malfunction.
HX-WA20PPPCPU-VQT4F46_mst.book 173 ページ 2012年2月14日 火曜日 午後5時10分
174 VQT4F46
White round spots
like soap bubbles
appear on the
recorded picture.
If you take a
picture with the
flash in a dark
place or indoors,
white round spots
may appear on
the picture caused by the flash reflecting of
particles of dust in the air. This is not a
malfunction. A characteristic of this is that the
number of round spots and their position
differ in every picture.
Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots visible.
Condition due to the LCD monitor
characteristics. Not a malfunction. Spots only
appear in the LCD monitor and will not be
recorded with the images.
Power
Problem Check points
This unit cannot be
turned on.
This unit does not
stay on long
enough.
Battery runs down
quickly.
Recharge the battery pack or connect the
AC adaptor. (l34)
In cold places, the battery using time
becomes shorter.
It is possible to insert the battery incorrectly,
so please pay particular attention when
inserting that it is correctly oriented.
The battery does
not charge.
The battery does
not stop charging.
Check that the plug portion of the AC
adaptor is not loose or misaligned.
HX-WA20PPPCPU-VQT4F46_mst.book 174 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 175
This unit is turned
off automatically.
To prevent battery consumption caused by
forgetting to turn the unit off etc., the
economy mode function works to send the
unit into sleep mode if the unit has been on
for approximately 5 minutes (default setting)
without an operation being performed.
When the unit is in sleep mode, you can
turn on the unit by pressing any of the
buttons on the unit.
If the unit turns off when you turn off the
power to the TV using the TV remote
control, the VIERA Link is at work. If you are
not using the VIERA Link, set [VIERA Link]
to [OFF]. (l138)
This unit cannot be
operated though it
is turned on.
This unit does not
operate normally.
Remove the battery or AC adaptor, wait
about 1 minute and then reconnect the
battery or AC adaptor. Then about 1 minute
later, turn on the unit again. (Conducting the
above operation while the media is being
accessed may damage the data on the
media.)
If normal operation is still not restored,
detach the power connected, and contact
consumer support. (l207, 208, 209)
A blinking high
temperature
warning icon
is shown, and the
unit does not turn
on.
The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
Power
Problem Check points
HX-WA20PPPCPU-VQT4F46_mst.book 175 ページ 2012年2月14日 火曜日 午後5時10分
176 VQT4F46
“ERROR
OCCURRED.
PLEASE TURN
UNIT OFF, THEN
TURN ON AGAIN.”
is displayed.
Check each of the following items.
jRemove the SD card from the device and
reinsert.
jRemove the battery and then put it in
again.
jChange the SD card and check.
If a message is still displayed after checking
the above, detach the power connected,
contact consumer support. (l207, 208,
209)
Indication
Problem Check points
The battery
capacity indication
or the elapsed time
indication is not
shown.
[DISPLAY] is [OFF]. (l71)
Status indicator
Problem Check points
The status
indicator is
flashing red.
During battery charging, the status indicator
flashes red with a period of approximately
2 seconds (approximately 1 second on,
1 second off). When charging ends, the
status indicator turns off. This is not a
malfunction.
Power
Problem Check points
HX-WA20PPPCPU-VQT4F46_mst.book 176 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 177
Recording
Problem Check points
The high
temperature
warning icon
is displayed and
recording is not
possible.
The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
When recording
still pictures, the
angle of view of
the image
displayed on the
LCD monitor
changes.
The field of view of the image displayed on
the LCD monitor differs for motion picture
recording and still picture recording. At time
of purchase, the recording standby screen
shows video view. Press the button
halfway to change to photo view. To change
the angle of view of the recording standby
screen to photo view, set [PHOTO VIEW] to
(ON). (l107)
The unit arbitrarily
stops recording.
Use an SD card that can be used for motion
picture recording. (l39)
The recordable time may have shortened
due to the deterioration of the data writing
speed or repeated recording and deletion.
Using the unit, format the SD card or built-in
memory. (l72)
Image not in focus Close and then re-open the LCD monitor.
Alternatively, turn the unit off and then on
again. When [FOCUS] is set to
(MANUAL), do the above, then reconfigure
the manual focus.
There is noise in
the recording
image.
When the [ISO] setting is too high, noise
may appear in the recorded images. Please
lower the ISO sensitivity setting. (l100)
HX-WA20PPPCPU-VQT4F46_mst.book 177 ページ 2012年2月14日 火曜日 午後5時10分
178 VQT4F46
Color balance of
images is strange
when recording in
a place such as a
gymnasium.
In a place with multiple light sources, such
as a gymnasium or a hall, set the White
Balance setting to (INDOOR 2). If you
cannot record clearly with the
(INDOOR 2), set it to (WHITE SET).
(l108)
Color or
brightness of the
image changes, or
you may see
horizontal bars in
the image.
The LCD monitor
flickers indoors.
Color or brightness of the image may
change, or you may see horizontal bars in
the image when the object is recorded
under fluorescent light, mercury light or
sodium light, etc., but this is not a
malfunction.
Record in Intelligent Auto Mode or set the
shutter speed to 1/60 in areas where the
power supply frequency is 60 Hz, or 1/100
in areas of 50 Hz.
/
Record in Intelligent Auto Mode.
Playback
Problem Check points
Files cannot be
played back.
Any files where the thumbnails display are
displayed as cannot be played back.
Recording
Problem Check points
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 178 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 179
Files cannot be
deleted.
Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l131, 167)
Any files where the thumbnails are
displayed as cannot be deleted. If the
files are unnecessary, format the media to
erase the data. (l72) Please be aware that
if a media is formatted then all the data
recorded on the media is erased and cannot
be recovered. Back up important data on a
PC, disc, etc.
Editing such as
rotation of the files
is not possible.
Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l131, 167)
During playback,
there is no sound.
Adjust the play volume in this unit. (l66)
With other products
Problem Check points
Video or audio is
not output even
though it is
connected to TV
correctly.
The images are
squeezed
horizontally.
Please read the operating instructions of
your TV and select the channel that
matches the input used for the connection.
Change the [TV ASPECT] setting to match
the aspect ratio of the TV. (l136)
When connecting with the HDMI micro
cable ( / ) or the HDMI
mini cable ( ), change the [HDMI]
setting. (l137)
Depending on the status of the unit and the
connecting cable, a picture may not appear
on the TV or LCD monitor. Check the status
of the unit and the connection. (l135)
Playback
Problem Check points
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 179 ページ 2012年2月14日 火曜日 午後5時10分
180 VQT4F46
If the SD card is
inserted in another
device, it is not
recognized.
Check that the device is compatible with the
capacity or type of SD card (SD Memory
Card/SDHC Memory Card/SDXC Memory
Card) that you inserted. Refer to the
operating instructions of the device for
details.
VIERA Link does
not work.
(Setting on this unit)
/
Connect with an HDMI micro cable
(optional). (l138)
Connect with an HDMI mini cable (optional).
(l138)
Set [VIERA Link] to [ON]. (l138)
Turn the unit off and then back on again.
(Setting on other devices)
If the TV input does not switch
automatically, switch the input using the TV
remote control.
Check the VIERA Link setting on the
connected device.
Please refer to the operating instructions of
the connected device.
With a PC
Problem Check points
An error message
may appear on the
PC when you
charge the battery
by connecting the
USB cable to a PC.
First disconnect the USB connection cable,
then turn on the unit and reconnect. The unit
will be recognized by the PC. To charge the
battery, first safely disconnect the USB
cable and turn off the unit. Then reconnect
the USB cable.
With other products
Problem Check points
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 180 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 181
When connected
by the USB cable,
this unit is not
detected by the
PC.
After re-inserting the SD card into the unit,
reconnect the supplied USB cable.
Select another USB terminal on the PC.
Check the operating environment. (l150,
162)
Connect the supplied USB cable again after
restarting the PC and turning on this unit
again.
When the USB
cable is
disconnected, an
error message will
appear on the PC.
To disconnect the USB cable safely, double-
click the icon in the task tray and follow
the instructions on the screen.
Cannot see the PDF
operating instructions for
HD Writer VE 2.0 or
HD Writer Web Uploader.
You will need Adobe Acrobat Reader 5.0 or
later or Adobe Reader 7.0 or later to read
the PDF operating instructions for HD Writer
VE 2.0 or HD Writer Web Uploader.
Others
Problem Check points
If the SD card is
inserted in this
unit, it is not
recognized.
If the SD card is formatted on a PC, it may
not be recognized by this unit. Use this unit
to format SD cards. (l72)
With a PC
Problem Check points
HX-WA20PPPCPU-VQT4F46_mst.book 181 ページ 2012年2月14日 火曜日 午後5時10分
182 VQT4F46
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
If you use this unit on top of or near a TV, the pictures and/or sound on
this unit may be disrupted by electromagnetic wave radiation.
Do not use this unit near cell phones because doing so may result in
noise adversely affecting the pictures and/or sound.
Recorded data may be damaged, or pictures may be distorted, by
strong magnetic fields created by speakers or large motors.
Electromagnetic wave radiation generated by microprocessors may
adversely affect this unit, disturbing the pictures and/or sound.
If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect
AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn
this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.
Make sure to use the supplied cords and cables. If you use optional
accessories, use the cords and the cables supplied with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile chemicals onto the unit.
If the unit is sprayed with such chemicals, its body may be marred and
the surface finish may peel off.
Do not leave rubber or plastic products in contact with the unit for a
long time.
Others
Cautions for use
About this unit
The unit and the SD card become warm during use. This is not a
malfunction.
HX-WA20PPPCPU-VQT4F46_mst.book 182 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 183
When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
Keep the unit away from sea water.
If sea water splashes onto the unit, wipe off the water with a well wrung
cloth. Then wipe the unit again with a dry cloth.
When carrying the unit, do not drop or bump it.
A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.
When you are not going to use the unit for an extended time
When storing the unit in a cupboard, it is recommended that you place
a desiccant (silica gel) in with it.
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 183 ページ 2012年2月14日 火曜日 午後5時10分
184 VQT4F46
When disposing of or giving away this unit, note that:
When the built-in memory undergoes [FORMAT], the file management
information is changed but not all of the data in the built-in memory is
deleted. It may be possible to recover the data using commercially
available data-recovery software.
When disposing of/giving away the unit,
we recommend that you physically format
the built-in memory of the unit.
To perform a physical format, connect the
unit to the AC adaptor, remove the card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the on-
screen instructions.
Please look after the data in your built-in memory carefully. Panasonic
will not be held responsible in the unlikely case that private data is
divulged.
The battery used in this unit is a rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and the effect increases the
more the temperature rises or falls. In cold areas, the full charge
indication may not appear or the low battery indication may appear about
5 minutes after starting use. At high temperatures, the protection function
may be triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
If the battery is left attached, a minute amount of current continues to
flow even if the unit is off. Keeping the unit in this state may result in
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
The battery should be stored in the vinyl bag so metal does not come
into contact with the terminals.
The battery should be stored in a cool place free from humidity, with as
constant temperature as possible. (Recommended temperature: 15 oC
to 25 oC (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH)
Extremely high temperatures or low temperatures will shorten the life
of the battery.
About the battery
Delete all data in
Built-in Memory?
HX-WA20PPPCPU-VQT4F46_mst.book 184 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 185
Do not contaminate the terminal portion of the battery attachment
portion or the battery terminals.
If the battery is kept in high-temperature, high-humidity, or oily-smoky
places, the terminals may rust and cause malfunctions.
To store the battery for a long period of time, we recommend you
charge it once every year and store it again after you have completely
used up the charged capacity.
Dust and other matter attached to the battery terminals should be
removed.
Do not remove the external labels and this may result in a malfunction
of the unit.
Prepare spare batteries when going out for recording.
Prepare batteries enough to last for 3 to 4 times the period you are
planning to record for. Cold places such as a ski resort can shorten
recording time.
If you drop the battery accidentally, check to see if the terminals are
damaged.
Inserting a battery with damaged terminals can damage the unit.
Do not throw old battery into fire.
Heating a battery or throwing it into a fire may result in an explosion.
If the operating time is very short even after the battery has been
recharged, the battery has worn out. Please purchase a new battery.
If the temperature of the battery is extremely high or extremely low,
charging may take time or the battery may not be charged.
If you use the AC adaptor near a radio, radio reception may be
disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from the
radio.
When using the AC adaptor, it may generate whirring sounds.
However, this is normal.
After use, be sure to disconnect the AC adaptor. (If you leave this unit
connected, the AC adaptor will consume approximately 0.2 W of
current.)
Always keep the electrodes of the AC adaptor clean.
About the AC adaptor
HX-WA20PPPCPU-VQT4F46_mst.book 185 ページ 2012年2月14日 火曜日 午後5時10分
186 VQT4F46
When the status indicator is flashing at a particularly fast or slow
rate, the following should be considered.
Flashing with approx. 4 second period (off for approx. 2 seconds,
on for approx. 2 seconds):
When the battery is over discharged or the temperature of the battery
is too high or low. It can be charged, but it may take a few hours to
complete the charging normally.
It will flash in 2 second intervals when normal charging resumes. Even
in such cases, it may start flashing in 4 second intervals until charging
is completed depending on the conditions of use.
Flashing with approx. 0.5 second period (off for approx.
0.25 second, on for approx. 0.25 second):
The battery is not charged. Remove the battery from the unit, and try
charging again.
Check that the terminals of the unit or battery are not dirty or covered
with a foreign object, and connect the battery correctly once again. If a
foreign object or dirt is present, turn off the unit before removing.
The battery or environment is at an extremely high or low temperature.
Wait until the temperature has returned to an appropriate level and try
charging again. If you are still unable to charge, there may be a fault in
the unit, battery or AC adaptor.
Off:
Charging has finished.
If the status indicator stays off despite the charging being unfinished,
there may be a fault in the unit, battery or AC adaptor. Refer to page
184 for details on the battery.
About status indicator during charging
HX-WA20PPPCPU-VQT4F46_mst.book 186 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 187
When disposing of or giving away the SD card, note that:
Formatting and deletion of this unit or computer only changes the file
management information and does not completely delete the data in
the SD card.
It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
To perform a physical format, connect the
unit to the AC adaptor, insert the SD card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the on-screen instructions.
The customer is responsible for the management of the data in the SD
card.
About the SD card
Delete all data on the card?
HX-WA20PPPCPU-VQT4F46_mst.book 187 ページ 2012年2月14日 火曜日 午後5時10分
188 VQT4F46
When the LCD monitor gets dirty, wipe it with a soft cloth, such as
eyeglass cleaner.
In a place with drastic temperature changes, condensation may form
on the LCD monitor. Wipe it with a soft cloth, such as eyeglass cleaner.
When the unit has become very cold, for example due to storage in a
cold area, its LCD monitor will be slightly darker than usual
immediately after the unit is turned on. The normal brightness will be
restored when the unit’s internal temperature rises.
LCD monitor
Extremely high precision technology is employed to produce the LCD
Monitor screen featuring a total of approximately 230,000 dots. The
result is more than 99.99% effective dots with a mere 0.01% of the
dots inactive or always lit. However, this is not a malfunction and does
not affect the recorded picture.
HX-WA20PPPCPU-VQT4F46_mst.book 188 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 189
Carefully observe copyright laws
Whatever you have recorded and created can be used for your
personal entertainment only. Under copyright laws, other materials
cannot be used without obtaining permission from the holders of
the copyrights.
Licenses
SDXC Logo is a trademark of SD-3C, LLC.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VIERA Link is a trademark of Panasonic Corporation.
EZ Sync is a trademark of Panasonic Corporation.
HDAVI Control is a trademark of Panasonic Corporation.
Microsoft®, Windows® and Windows Vista® are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
IBM and PC/AT are registered trademarks of International Business
Machines Corporation of the U.S.
Intel®, Pentium®, Celeron® and Intel® Core are trademarks of Intel
Corporation in the U.S. and/or other countries.
AMD Athlon is a trademark of Advanced Micro Devices, Inc.
iMovie, iChat, Mac and Mac OS are trademarks of Apple Inc.
registered in the U.S. and other countries.
YouTube is a trademark of Google Inc.
Facebook is a trademark of Facebook Inc.
Other names of systems and products mentioned in these instructions
are usually the registered trademarks or trademarks of the
manufacturers who developed the system or product concerned.
Others
About copyright
HX-WA20PPPCPU-VQT4F46_mst.book 189 ページ 2012年2月14日 火曜日 午後5時10分
190 VQT4F46
This product is licensed under the AVC patent portfolio license for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a video provider licensed
to provide AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
HX-WA20PPPCPU-VQT4F46_mst.book 190 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 191
SD cards are only mentioned with their main memory size. The stated
times are the approximate recordable times for continuous recording.
AFavors image quality
BFavors recording time
*1 High-definition image quality
*2 Conventional standard image quality
Others
Recording modes/approximate
recordable time
Recording
mode *1 *1 *1 *1 *2
Picture size
1920
k
1080 1920
k
1080 1280
k
720 1280
k
720
640k480
SD
card
4GB 20 min 30 min 30 min 50 min
2h20min
16 GB
1h50min 2h10min 2h10min 3h30min 9h50min
64 GB
7h 8h20min 7h50min
13h20min
32 h
Built-in
memory Approx.
64 MB
15s 20s 20s 40s 2min
HX-WA20PPPCPU-VQT4F46_mst.book 191 ページ 2012年2月14日 火曜日 午後5時10分
192 VQT4F46
*3 Please use when playing back/editing on a Mac.
If recording for long periods, prepare batteries for 3 or 4 times the
period you wish to record for. (l36)
The default setting is mode.
Recording a quickly moving subject or recording a number of short
scenes may shorten the recordable time.
When the [REC MODE] is set to (VOICE RECORD), the file is
saved after approximately 5 hours of recording, and the audio
recording ends. With other recording mode setting, the unit saves the
file and saves the continuation in a new file when the file size exceeds
4 GB during recording. (A new file is created automatically every 4 GB.
The recording state is continued until the unit enters the paused state)
When recording in Slow Motion Mode ( / ), recording ends
after 15 seconds of recording.
Use time in the row of 4 GB in above table as a guideline for the time
that can be copied onto one DVD disc (4.7 GB).
Recording mode *3
Picture size 960k540 VOICE RECORD
SD card
4GB 20 min
31 h
16 GB 1h20min
128 h
64 GB 5h20min
512 h
Built-in
memory Approx.
64 MB 10 s 30 min
Recording mode
Picture size 640k360 320k180
SD card
4GB 20 min 20 min
16 GB 1h40min 1h50min
64 GB 5h10min 4h20min
Built-in
memory Approx.
64 MB 15 s 15 s
HX-WA20
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 192 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 193
SD cards are only mentioned with their main memory size. The stated
number is the approximate number of recordable pictures.
Others
Approximate number of
recordable pictures
Picture size 4608k3456 3616k2712 2560k1920
Aspect ratio 4:3 4:3 4:3
SD card
4GB 450 750 1400
16 GB 1900 3100 6000
64 GB 7500 12000 23000
Built-in
memory Approx.
64 MB 51025
Picture size 2048k1536 640k480
Aspect ratio 4:3 4:3
SD card
4GB 2300 16500
16 GB 9000 67000
64 GB 36000 237000
Built-in
memory Approx.
64 MB 40 250
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 193 ページ 2012年2月14日 火曜日 午後5時10分
194 VQT4F46
/
Picture size 4608k2592 3840k2160 2560k1440 1920k1080
Aspect ratio 16:9 16:9 16:9 16:9
SD
card
4GB 600 850 1900 3400
16 GB 2500 3600 7500 13500
64 GB 10000 14000 31000 52000
Built-in
memory Approx.
64 MB
10 15 30 50
Picture size (360e PANORAMA) (180e PANORAMA)
10688k720
1280
k
1
0688 5344k720 1280k5344
Aspect ratio s s
SD
card
4GB 500 1000
16 GB 2200 4400
64 GB 8500 17500
Built-in
memory Approx.
64 MB
515
Picture size 4352k3264 3744k2808 2560k1920
Aspect ratio 4:3 4:3 4:3
SD card
4GB 500 700 1400
16 GB 2100 2900 6000
64 GB 8500 11500 23000
Built-in
memory Approx.
64 MB 51025
12
M
8.3
M
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 194 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 195
The memory capacity indicated on the label of an SD card is the total of
the capacity for copyright protection and management and the capacity
which can be used on the unit, a PC etc.
Picture size 2048k1536 640k480
Aspect ratio 4:3 4:3
SD card
4GB 2300 16500
16 GB 9000 67000
64 GB 36000 237000
Built-in
memory Approx.
64 MB 40 250
Picture size 4352k2448 3744k2106 2560k1440 1920k1080
Aspect ratio 16:9 16:9 16:9 16:9
SD
card
4GB 650 900 1900 3400
16 GB 2800 3800 7500 13500
64 GB 11000 15000 31000 52000
Built-in
memory Approx.
64 MB
10 15 30 50
Picture size (360e PANORAMA) (180e PANORAMA)
14400k720
1280
k
14400
7200k720 1280k7200
Aspect ratio s s
SD
card
4GB 400 800
16 GB 1600 3300
64 GB 6500 13000
Built-in
memory Approx.
64 MB
510
HX-WA20PPPCPU-VQT4F46_mst.book 195 ページ 2012年2月14日 火曜日 午後5時10分
196 VQT4F46
Dual Camera
Information for your safety
Others
Specifications
Power source: DC 5.0 V (When using AC adaptor)
DC 3.7 V (When using battery)
Power consumption: Recording;
4.2 W
4.1 W
4.0 W
Charging;
4.5 W
4.5 W
3.4 W
Signal system:
1080/60i, 1080/30p, 720/60p, 720/30p, 540/30p, 480/30p
360/240p, 180/480p
Recording format:
MPEG-4 AVC file format standard (.MP4)
Motion picture compression:
MPEG-4 AVC/H.264, iFrame
Audio compression:
AAC (2 ch)
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 196 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 197
Recording mode and transfer rate:
; Approx. 17 Mbps (VBR)
; Approx. 15 Mbps (VBR)
; Approx. 15 Mbps (VBR)
; Approx. 9 Mbps (VBR)
; Approx. 3 Mbps (VBR)
; Approx. 24 Mbps (VBR)
; Approx. 18 Mbps (VBR)
; Approx. 14 Mbps (VBR)
For picture size and recordable time of a motion picture, refer to page 191.
Still picture recording format:
JPEG (Design rule for Camera File system, based on Exif 2.2 standard)
Refer to page 193 for the picture size and number of recordable pictures.
Recording media:
SD Memory Card (FAT12 and FAT16 system compliant)
SDHC Memory Card (FAT32 system compliant)
SDXC Memory Card (exFAT system compliant)
Refer to page 39 for details on SD cards usable in this unit.
Built-in memory; Approx. 64 MB
Image sensor:
1/2.33z 1MOS image sensor
Total; Approx. 16400 K
Effective pixels;
Motion picture; 9810 K (4:3), 8290 K (16:9)
Still picture; 9890 K (4:3), 8370 K (16:9)
/
1/2.33z 1MOS image sensor
Total; Approx. 14400 K
Effective pixels;
Motion picture; 14300 K (4:3), 11900 K (16:9)
Still picture; 14300 K (4:3), 11900 K (16:9)
HX-WA20
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 197 ページ 2012年2月14日 火曜日 午後5時10分
198 VQT4F46
Lens:
Auto iris
F2.8 to F3.9
Focal length;
4.0 mm to 20.0 mm
35 mm equivalent;
Motion picture ( / / / / / );
28.0 mm to 280.0 mm
Motion picture ( );
28.1 mm to 140.5 mm
Motion picture ( );
28.3 mm to 141.5 mm
Still picture;
28.0 mm to 140.0 mm
Minimum focus distance;
Normal; Approx. 10 cm (3.9q) (Wide)/Approx. 1.1 m (3.6 feet) (Tele)
Macro; Approx. 1 cm (0.39q) (Wide)/ Approx. 80 cm (2.6 feet) (Tele)
/
Auto iris
F3.5 to F3.7
Focal length;
6.8 mm to 34.0 mm
35 mm equivalent;
Motion picture;
38.9 mm to 233.4 mm (Double range zoom W mode, 4:3)
40.0 mm to 240.0 mm (Double range zoom W mode, 16:9)
80.9 mm to 485.4 mm (Double range zoom T mode, 4:3)
82.4 mm to 494.4 mm (Double range zoom T mode, 16:9)
Still picture;
38.6 mm to 193.0 mm (4:3)
39.9 mm to 199.5 mm (16:9)
Minimum focus distance;
Normal; Approx. 10 cm (3.9q) (Wide)/Approx. 1 m (3.3 feet) (Tele)
Macro; Approx. 1 cm (0.39q) (Wide)/ Approx. 80 cm (2.6 feet) (Tele)
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 198 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 199
Zoom:
Motion picture; 5k optical zoom, 15k i.Zoom, 120k digital zoom
Still picture; 5k optical zoom, 10k Extra Optical Zoom (when [PICTURE
SIZE] is set to or ), 120k digital zoom (when [PICTURE SIZE]
is set to or )
/
Motion picture; 5k optical zoom, 12k double range zoom, 15k i.Zoom,
120k digital zoom
Still picture; 5k optical zoom, 50k digital zoom
Image stabilizer function:
Electronic
Monitor:
/
2.6z wide LCD monitor (Approx. 230 K dots)
3.0z wide LCD monitor (Approx. 230 K dots)
Microphone:
Stereo
Speaker:
1 round speaker, dynamic type
White balance adjustment:
Auto tracking white balance system
Standard illumination:
1,400 lx
Minimum required illumination:
Approx. 2 lx (1/15 with Low Light mode in the Scene mode)
Approx. 6 lx (Scene mode off 1/30)
Approx. 3 lx (1/15 with Low Light mode in the Scene mode)
Approx. 9 lx (Scene mode off 1/30)
Approx. 4 lx (1/15 with Low Light mode in the Scene mode)
Approx. 12 lx (Scene mode off 1/30)
USB/AV connector video output level:
1.0 Vp-p, 75 h
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 199 ページ 2012年2月14日 火曜日 午後5時10分
200 VQT4F46
HDMI micro connector video output level ( / )/
HDMI mini connector video output level ( ):
HDMI 1080i/720p/480p
USB/AV connector audio output level (Line):
155 mV, 220 h, 2 ch
HDMI micro connector audio output level ( / )/
HDMI mini connector audio output level ( ):
Linear PCM
USB:
Reader function
SD card; Read only (No copyright protection support)
Built-in memory; Read only
Hi-Speed USB (USB 2.0), USB terminal Type micro B (AV output share)
Battery charging function (Charges from USB terminal when the unit is
off, 500 mA)
Web camera;
Compression format; Motion JPEG
Image size; 640k480/30p (VGA)
Flash:
Available range; Approx. 80 cm to 2.0 m (2.6 feet to 6.6 feet)
/
Available range; Approx. 80 cm to 2.1 m (2.6 feet to 6.9 feet)
Dimensions:
/
93.9 mm (W)k125.6 mm (H)k44.1 mm (D)
[3.70 q (W)k4.95 q (H)k1.74 q (D)] (including projecting parts)
86.2 mm (W)k120.8 mm (H)k38.1 mm (D)
[3.40 q (W)k4.76 q (H)k1.50 q (D)] (including projecting parts)
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 200 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 201
Mass (Weight):
Approx. 235 g (Approx. 0.519 lbs.)
[without battery (supplied) and an SD card (optional)]
Approx. 238 g (Approx. 0.525 lbs.)
[without battery (supplied) and an SD card (optional)]
Approx. 162 g (Approx. 0.358 lbs.)
[without battery (supplied) and an SD card (optional)]
Mass (Weight) in operation:
Approx. 256 g (Approx. 0.565 lbs.)
[with battery (supplied) and an SD card (optional)]
Approx. 259 g (Approx. 0.571 lbs.)
[with battery (supplied) and an SD card (optional)]
Approx. 180 g (Approx. 0.397 lbs.)
[with battery (supplied) and an SD card (optional)]
Operating temperature:
0oCto35oC (3Fto9F)
Operating humidity:
10%RH to 80%RH
Waterproof performance:
/
Equivalent to IEC 60529 “IPX8”
Depths less than 3.0 m (10 feet) for 60 minutes or less
Dustproof performance:
Equivalent to IEC 60529 “IP5X”
Battery operation time:
See page 36
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-WA20
HX-WA20PPPCPU-VQT4F46_mst.book 201 ページ 2012年2月14日 火曜日 午後5時10分
202 VQT4F46
AC adaptor
Information for your safety
Power source:
Power
consumption:
DC output:
AC 100 V to 240 V, 50/60 Hz
7W
DC 5.0 V, 1.0 A
Dimensions:
48.9 mm (W)k32.8 mm (H)k75.2 mm (D)
[1.93 q (W)k1.29 q (H)k2.96 q (D)]
Mass (Weight):
Approx. 54 g (Approx. 0.119 lbs.)
HX-WA20PPPCPU-VQT4F46_mst.book 202 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 203
* Please refer to page 36, concerning the battery charging time and
available recording time.
Others
Optional accessories
Accessory No. Figure Description
/
VW-VBX090*
Rechargeable Lithium Ion
Battery Pack
VW-VBX070*Rechargeable Lithium Ion
Battery Pack
/
RP-CHEU15
HDMI micro cable
RP-CDHM15
RP-CDHM30
HDMI mini cable
HX-WA20
HX-WA2
HX-DC2
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 203 ページ 2012年2月14日 火曜日 午後5時10分
204 VQT4F46
Accessory No. Figure Description
RP-SDL16GU1K
RP-SDL08GU1K
RP-SDL04GU1K
RP-SDL02GU1K
Class 4 16 GB SDHC
Memory Card
Class 4 8 GB SDHC
Memory Card
Class 4 4 GB SDHC
Memory Card
Class 4 2 GB SD Memory
Card
RP-SDU64GE1K
RP-SDU32GU1K
RP-SDU16GU1K
RP-SDU08GU1K
RP-SDU04GU1K
Class 10 64 GB SDXC
Memory Card
Class 10 32 GB SDHC
Memory Card
Class 10 16 GB SDHC
Memory Card
Class 10 8 GB SDHC
Memory Card
Class 10 4 GB SDHC
Memory Card
NOTE:
Accessories and/or model numbers may vary by country. Please
consult your local dealer.
Product numbers correct as of Feb. 2012. These may be subject
to change.
HX-WA20PPPCPU-VQT4F46_mst.book 204 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 205
Accessory Order Form
(For USA and Puerto Rico Customers)
In CANADA, please contact your local Panasonic dealer for more
information on Accessories.
TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER
20421 84th Ave. S., Kent, WA 98032
Ship To:
Mr.
Mrs.
Ms. First Last
Street Address
City State Zip
Phone#:
Day ( )
Night ()
4. Shipping information (UPS delivery requires complete street address)
Please photocopy this form when placing an order.
3. Method of payment (check one)
American Express
VISA
MasterCard
(Please do not send cash)
2. Items Ordered
QuantityAccessory # Price EachDescription Total Price
$6.95
Subtotal
Your State & Local Sales Tax
Shipping & Handling
Total
1. Model #
Discover
Expiration Date
Credit Card #
Customer Signature
HX-WA20PPPCPU-VQT4F46_mst.book 205 ページ 2012年2月14日 火曜日 午後5時10分
206 VQT4F46
Others
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Camcorder Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will,
for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”.
Carry-In or Mail-In Service
To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA
(7262).
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s
Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping
Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as
Panasonic is committed to providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you can be reached.
A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of
consumer controls, improper maintenance, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or
other business or rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of God.
Product or Part Name Parts Labor
syad 09 raey 1 redrocmaC
SD Memory Cards, Rechargeable Batteries
(defective exchange) 90 days Not Applicable
HX-WA20PPPCPU-VQT4F46_mst.book 206 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 207
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or
damage to media or images, data or other memory or recorded content. The items listed are not
exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the warranty period, you
may contact your dealer or Service Center. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products
by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of January 2012
HX-WA20PPPCPU-VQT4F46_mst.book 207 ページ 2012年2月14日 火曜日 午後5時10分
208 VQT4F46
Others
Warranty (For Canadian Customers)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under
normal use and for a period as stated below from the date of original purchase agrees to, at its option
either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will
be made by Panasonic Canada Inc.
Camcorder Products - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold
“as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND
PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is
attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty. Rechargeable batteries are
warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT
OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty
excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other
memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable. This warranty gives you specific legal rights and you may have other rights which
vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre: Telephone: 1-800-995-8649
Fax #: (905) 238-2360
Email link: camcorderconcierge@ca.panasonic.com
For defective product exchange within the warranty period, please contact the original dealer or our
Customer Care Centre.
HX-WA20PPPCPU-VQT4F46_mst.book 208 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 209
Others
Useful Information
(Only For Latin American Countries)
Customer Service
Customer Service Directory
Obtain product information and operative assistant; localize the closer distributor or
Service Center; buy spare parts and accessories by our web site to Latin American:
http://www.lar.panasonic.com
Also you may contact us directly by our Contact Center:
Panama 800-PANA (800-7262)
Colombia 01-8000-94PANA (01-8000-947262)
Ecuador 1800-PANASONIC (1800-726276)
Costa Rica 800-PANA737 (800-7262737)
El Salvador 800-PANA (800-7262)
Guatemala 1-801-811-PANA (1-801-811-7262)
Chile 800-390-602
From a cell phone: 797-5000
Venezuela 800-PANA-800 (800-7262-800)
Uruguay 0-800-PANA (0-800-7262)
Peru 0800-00726
Argentina 0800-333-PANA (0800-333-7262)
0810-321-PANA (0810-321-7262)
Paraguay 0800-11-PANA (0800-11-7262)
Mexico Service
To obtain information in the Republic of Mexico contact us at:
email: atencion.clientes@mx.panasonic.com
Or you may contact us in the next following phones numbers:
01800-VIP-PANA (01800-847-7262) - Interior
(55) 5000-1200 - Mexico D.F. and Metropolitan Area
HX-WA20PPPCPU-VQT4F46_mst.book 209 ページ 2012年2月14日 火曜日 午後5時10分
210 VQT4F46
Index
A
AC adaptor . . . . . . . . . . 34, 185
Alert sound . . . . . . . . . . . . . . 70
Approximate number of
recordable pictures . . . . . . 193
Audio compatibility . . . . . . . . 67
Auto focus . . . . . . . . . . . . . . 63
Auto review . . . . . . . . . . . . 108
Automatic white balance . . . 63
B
Battery . . . . . . . . . . . . . 30, 184
Battery capacity indication . . . . 37
Brightness . . . . . . . . . . . . . . 71
Built-in memory . . . . . . . . . . . 7
Burst recording . . . . . . . . . . 83
C
Card . . . . . . . . . . . . . . . 39, 187
Card reader . . . . . . . . . . . . 156
Charging time (battery) . . . . 36
Cleaning . . . . . . . . . . . . . . . 183
Color mode . . . . . . . . . . . . . 99
Copy
Built-in Memory to
SD card . . . . . . . . . . . . . 142
Dubbing . . . . . . . . . . . . . 143
Creating still picture from
motion picture . . . . . . . . . . 115
D
Date and time . . . . . . . . . . . 48
Delete . . . . . . . . . . . . . . . . 128
Digital zoom . . . . . . . . . . . . . 78
Display . . . . . . . . . . . . . . . . . 71
Displaying file information . . . 120
Double range zoom . . . . . . . 77
E
Economy . . . . . . . . . . . . 45, 71
Eye-Fi . . . . . . . . . . . . . . . . 166
F
File No. continued . . . . . . . . 74
Flash . . . . . . . . . . . . . . . . . . 96
Focus . . . . . . . . . . . . . 63, 112
Focus mode . . . . . . . . . . . . 98
Formatting . . . . . . . . . . . . . . 72
Frame-by-frame
playback . . . . . . . . . . . . . . 114
H
HD Writer VE 2.0 . . . 145, 161
HDMI micro
connector . . . .25, 132, 137, 138
HDMI mini
connector . . . .27, 133, 137, 138
I
i.Zoom . . . . . . . . . . . . . . . . . 78
iFrame . . . . . . . . . . . . . . . . . 89
Image stabilizer function . . . 80
Initial setting . . . . . . . . . . . . 72
Intelligent Auto Mode . . . . . 61
Iris . . . . . . . . . . . . . . . . . . . 110
L
Language . . . . . . . . . . . . . . 71
LCD Display Indications . . 169
LCD monitor . . . . . 24, 27, 188
Limited Warranty
(Canada) . . . . . . . . . . . . . . 208
Limited Warranty
(USA and Puerto Rico) . . . 206
M
Manual adjustment . . . . . . 110
Manual focus . . . . . . . . . . . 112
Manual recording . . . . . . . 108
Menu . . . . . . . . . . . . . . . . . . 68
Metering mode . . . . . . . . . . 98
Motion picture compatibility . . . . 67
HX-WA20PPPCPU-VQT4F46_mst.book 210 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 211
P
Panorama recording . . . . . . 85
Panorama still picture . . . . 116
Photo view . . . . . . . . . . . . . 107
Picture size . . . . . . . . . . . . . 90
Play volume . . . . . . . . . . . . 122
Playback folder . . . . . . . . . . 74
Playback Operations . . . . . 113
Playback zoom
(still picture) . . . . . . . . . . . . 117
Power button . . . . . . . . . . . . 44
Protect . . . . . . . . . . . . . . . . 131
R
Recordable time . . . . . . 36, 191
Recording folder . . . . . . . . . 73
Recording mode . . . . . . . . . 89
Recording time elapsed
(audio) . . . . . . . . . . . . . . . . . 60
Recording time elapsed
(motion picture) . . . . . . . . . . 53
Red-eye correct . . . . . . . . . 124
Remaining number of
still pictures . . . . . . . . . . . . . 56
Remaining time left for
recording . . . . . . . . . . . . 53, 60
Resize . . . . . . . . . . . . . . . . 123
Rotate . . . . . . . . . . . . . . . . 122
S
Scene mode . . . . . . . . . . . . . 90
Scene splicing . . . . . . . . . . 126
Scroll playback . . . . . . . . . . 114
SD Memory Card . . . . . . . . . 39
SD Speed Class Rating . . . . 39
SDHC Memory Card . . . . . . 39
SDXC Memory Card . . . . . . 39
Self timer recording . . . . . . . 97
Self-recording . . . . . . . . . . . 51
Shortcut functions . . . . . . . 103
Shutter speed . . . . . . . . . . 110
Simultaneous recording . . . . 58
Sleep mode . . . . . . . . . . . . . 45
Slide show . . . . . . . . . . . . . 118
Slow motion mode . . . . . . . 81
Slow-motion playback . . . . 114
Splitting a scene . . . . . . . . 124
Standby mode . . . . . . . . . . . 44
Still picture compatibility . . . 67
T
Transfer . . . . . . . . . . . . . . . 167
Tripod receptacle . . . . . 26, 29
TV aspect . . . . . . . . . . . . . 136
TV format . . . . . . . . . . . . . 137
U
Underwater recording . . . . . 88
USB/AV
connector . . . . 25, 27, 132, 133, 143, 155
Useful Information (Latin
American Countries) . . . . . 209
V
VIERA Link . . . . . . . . . . . . 138
Volume adjustment . . . . . . . 66
W
Web camera . . . . . . . . . . . 159
Web upload . . . . . . . . . . . . 163
White balance . . . . . . . . . . 108
Wind cut . . . . . . . . . . . . . . 108
Z
Zoom . . . . . . . . . . . . . . . . . . 76
Zoom mode . . . . . . . . . . . . . 78
HX-WA20PPPCPU-VQT4F46_mst.book 211 ページ 2012年2月14日 火曜日 午後5時10分
212 VQT4F46
Insertar/extraer la batería
1Abra la puerta trasera.
2(Para insertar el paquete de baterías)
Confirme la orientación de las marcas del terminal e
inserte la batería.
Amarcas del terminal
Spanish Quick Use Guide/Guía
española para el uso rápido
HX-WA20/HX-WA2
1Desbloquee la palanca LOCK.
2Deslice la palanca para abrir/cerrar.
3Abra la puerta trasera.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 212 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 213
Confirme que la palanca B esté bloqueada en la batería.
Se puede insertar erróneamente la batería colocándola al revés, por lo
tanto asegúrese de verificar atentamente la orientación.
(Para retirar el paquete de baterías)
Empuje la palanca B hacia la
dirección de la flecha y tire la
batería de forma recta hacia afuera.
3Cierre la puerta trasera.
1Cierre la puerta trasera.
2Deslice la palanca para abrir/cerrar.
3Bloquee la palanca LOCK.
Bloquee de forma segura en los puntos donde la parte roja C de la
palanca para abrir/cerrar y la palanca LOCK ya no estén visibles.
LOCK
SD CARD/
BATTERY
LOCK
SD CARD/
BATTERY
SD CARD/
BATTERY
LOCK
Estado
bloqueado
Estado
desbloqueado
Palanca para
abrir/cerrar
Palanca de
bloqueo
HX-WA20PPPCPU-VQT4F46_mst.book 213 ページ 2012年2月14日 火曜日 午後5時10分
214 VQT4F46
1Abra la tapa de la batería/tarjeta.
2Inserte la batería, tenga cuidado y vea que coincidan
las marcas del terminal.
Amarcas del terminal
Se puede insertar erróneamente la batería colocándola al revés, por lo
tanto asegúrese de verificar atentamente la orientación.
3Cierre la tapa de la batería/tarjeta.
Cierre de forma segura, escuche un sonido de clic.
HX-DC2
1Deslice mientras empuja la
tapa de la batería/tarjeta.
2Abra la tapa de la batería/
tarjeta.
HX-WA20PPPCPU-VQT4F46_mst.book 214 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 215
Retirar la batería
Mantenga presionado el botón de alimentación para apagar la unidad,
luego tire hacia arriba y retire la batería.
Siempre revise que el monitor LCD y la lámpara del indicador de
estado estén apagados.
Carga de la batería
AIndicador de estado
BAdaptador de CA
CA la toma de CA
Inserte las clavijas hasta el fondo.
/
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 215 ページ 2012年2月14日 火曜日 午後5時10分
216 VQT4F46
1Conecte el cable USB al adaptador de CA.
Revise que la parte del enchufe del adaptador de CA no esté floja o
mal alineada.
2Enchufe el adaptador de CA en un tomacorriente de
CA.
3Conecte el cable USB a la unidad.
El indicador de estado parpadea en rojo durante un período de
aproximadamente 2 segundos (aproximadamente 1 segundo encendido,
aproximadamente 1 segundo apagado), y comienza la carga.
Se apagará cuando se completa la carga.
Insertar/extraer una tarjeta SD
1Abra la puerta trasera.
HX-WA20/HX-WA2
1Desbloquee la palanca LOCK.
2Deslice la palanca para abrir/cerrar.
3Abra la puerta trasera.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 216 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 217
2Inserte (retire) la tarjeta SD en (de) la ranura de la
tarjeta.
Oriente el lado de la etiqueta A en la dirección mostrada en la
ilustración e introdúzcalo hasta el fondo.
Presione el centro de la tarjeta SD y luego retírela completamente.
3Cierre la puerta trasera.
1Cierre la puerta trasera.
2Deslice la palanca para abrir/cerrar.
3Bloquee la palanca LOCK.
Bloquee de forma segura en el punto donde la parte roja de la
palanca LOCK ya no sea visible.
LOCK
SD CARD/
BATTERY
HX-WA20PPPCPU-VQT4F46_mst.book 217 ページ 2012年2月14日 火曜日 午後5時10分
218 VQT4F46
1Abra la tapa de la batería/tarjeta.
2Inserte (retire) la tarjeta SD en (de) la ranura de la
tarjeta A.
Oriente el lado de la etiqueta B en la dirección mostrada en la
ilustración e introdúzcalo hasta el fondo.
Presione el centro de la tarjeta SD y luego retírela completamente.
3Cierre la tapa de la batería/tarjeta.
Cierre de forma segura hasta que haga clic.
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 218 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 219
Encender/apagar el dispositivo
Encender y apagar el dispositivo con el botón de alimentación
Pulse el botón de alimentación para encender la unidad.
Para apagar la unidad
Mantenga presionado el botón de encendido hasta que se apague el
monitor LCD.
/
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 219 ページ 2012年2月14日 火曜日 午後5時10分
220 VQT4F46
Selección del modo
Cambie el modo a grabación o a reproducción.
Pulse el botón REC/ .
Cada vez que presiona el botón REC/ cambia el modo.
Cómo usar el botón SET
Utilice el botón SET para seleccionar las funciones de grabación y las
operaciones de reproducción, y para hacer funcionar la pantalla de
menús.
En estas instrucciones de funcionamiento, el botón SET se denomina
como se muestra a continuación.
Ejemplo:
Selección del idioma
1) Pulse el botón MENU, luego seleccione [ (MENÚ OPCION 2)] >
[LANGUAGE].
2) Seleccione el idioma deseado.
/
Modo de Grabación Para grabar imágenes en movimiento,
imágenes fijas y audio
Modo de reproducción Para reproducir imágenes en
movimiento, imágenes fijas y audio
o
Seleccione usando el botón SET
HX-WA20
HX-WA2
HX-DC2
2
HX-WA20PPPCPU-VQT4F46_mst.book 220 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 221
Grabación de películas
1) Cambie al modo de grabación.
2) Abra el monitor LCD.
3) Pulse el botón de inicio/parada de grabación para iniciar la
grabación.
ACuando comienza a grabar, aparece ¥.
Grabación de fotografía
1) Cambie al modo de grabación.
2) Abra el monitor LCD.
3) Presione por completo el botón para tomar una imagen.
/
/
HX-WA20
HX-WA2
HX-DC2
000:00:00000:00:00000:00:00
HX-WA20
HX-WA2
HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book 221 ページ 2012年2月14日 火曜日 午後5時10分
222 VQT4F46
Reproducción de película/fotografía
1) Cambie al modo de reproducción.
2) Seleccione el archivo a reproducir usando el botón SET y pulse el
botón SET.
3) Seleccione el icono de operación con el botón SET.
AIcono de funcionamiento*
* Si desaparece el icono de funcionamiento, realice una operación del
botón SET para visualizarlo.
Reproducción de imágenes en movimiento
Reproducción/Pausa
Reproducción de
rebobinado
Reproducción de avance
rápido
Detiene la reproducción y
muestra las miniaturas.
Reproducción de imágenes fijas
Elimina la imagen fija.
Muestra el archivo anterior
Muestra el siguiente archivo
Detiene la reproducción y vuelve a
la visualización de miniatura
HX-WA20PPPCPU-VQT4F46_mst.book 222 ページ 2012年2月14日 火曜日 午後5時10分
VQT4F46 223
HX-WA20PPPCPU-VQT4F46_mst.book 223 ページ 2012年2月14日 火曜日 午後5時10分
P
VQT4F46
1AG6P1P6499--(S)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
F0212MZ0
© Panasonic Corporation 2012
Printed in Indonesia
HX-WA20PPPCPU-VQT4F46_mst.book 224 ページ 2012年2月14日 火曜日 午後5時10分

Navigation menu