Paxton Access WA01 Wireless ACU Module User Manual

Paxton Access Ltd Wireless ACU Module INSTRUCTION Wireless reader module

a href="https://usermanual.wiki/Paxton-Access" itemprop="url"> Paxton Access >

User Manual

19/12/2008Cable extensionsReaders can be extended using Belden CR9540 10-core overall screened cable. The maximum length is 100 yards.Technical SupportTechnical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST1 800 672 PAXT support@paxton-access.co.ukIns-30095-US Wireless reader modulesDocumentation on all Paxton Access products can be found on our web site - http://www.paxton-access.com/The Net2Air wireless reader modules consist of two parts. The ACU module and the Remote module. The ACU module is plugged into the reader port of the control unit. The Remote module is located at the distant location and contains a reader port and a lock relay that replicates the switching of the ACU’s own relay.A 12V DC power supply is required for the remote module. This may also be used for lock power.This module repeats the basic input and output functions of the ACU.The unit has a reader port (8 way plug and RJ45), power input and relay connection. Mount the unit and then wire in the remote equipment (reader, lock, etc). A suitable 12V DC power supply is also required.LED indicationsRed Red reader LEDAmber Amber reader LEDGreen Green reader LEDAmber Relay activated (COM / NO contacts closed)Blue Net2Air network activity (Transmit or Receive)Green PCB PowerThis module plugs directly into the reader port on the ACU. If the relay position is also to be repeated by the remote module a VOLT FREE loop connection should be made between the relay condition input and the COM and NO contacts on the controller relay. (See Wiring section)ACU moduleLED indicationsBlue Net2Air network activity (Transmit or Receive)Amber Mode - The system is unlocked to allow a remote module to be registered.Green A token has been presented at the remote module.Remote ModuleOperationNOTE: The module provides the power for this detection circuit. No voltage or diode should be connected at the ACU control relay or either PCB may be damaged.The typical range in an ofce environment is 5 yards. Where there is clear ‘line of sight’ across an open space, (warehouse roof void, car park, etc) a range of 30 yards is possible. (See Wireless limitations)
12V dcRed LEDAmber LEDReader Reader RJ45PowerRelayGreen LEDDataClockMedia DetectNetwork0VWireless reader modulePLACE SERIALNUMBERLABEL HEREHTTPPAXTONINFO0889WiringACU ModuleRemote ModuleReader port plug connectionScreen or spare cores from network cableKR1 redae dapye1R le ay 2 R le ay 1Keypad 2 Reader 2stupnI P ewo rNet2 classicRed 12V dcRed LEDAmber LEDGreen LEDData/D0Clock/D1Media Detect0V outLoadDataClockRcd V21 deRDEL deDEL rebmADEL neerG0D/ataD1D/kcolCtceteD aideMtuo V0daoLataDkcolC+12V0VF :noituaC ro ylno sredaer c.d V21.F tcerroc ronoitcennoc fo fer sredaer V5 dlo reotsnoitcurtsniPLACE SERIALNUMBERLABEL HEREHTTPPAXTONINFO<0889Wire the relay condition input across the COM / NO of the relay to be monitored. This will vary with ACU style.NANO - Do NOT use the powered Lock connection on this ACU. The module monitors volt free relay connections.The lock is wired across 12V and COM. A 0V link is then required to complete the circuit. This will be wired from 0v to NO or NC depending on lock type (Fail Open / Fail Closed)A diode is supplied which should be tted across 12V and COM (Silver end to 12V ) to protect the relay contacts.ReaderFail closed release12V DC power supplyRelay condition inputRadio Frequency SelectorMode Button
Download:
Mirror Download [FCC.gov]
Document ID1134909
Application ID43rUxdnaj35lXh4OWlS7dA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.32kB (366465 bits)
Date Submitted2009-07-07 00:00:00
Date Available2009-07-07 00:00:00
Creation Date2008-12-19 14:05:39
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2009-05-05 15:26:20
Document TitleINSTRUCTION - Wireless reader module
Document CreatorAdobe InDesign CS2 (4.0.5)
FCC ID Filing: USEWA01

Navigation menu