Thomas & Betts Ty Rap® Catamount® Fastening Products 1000450212 Catalog

2016-10-06

: Pdf 1000450212-Catalog 1000450212-Catalog B5 unilog

Open the PDF directly: View PDF .
Page Count: 79

backPage.pdf
- Untitled

www.youtube.com/user/ebhorsman

Visit our Shop Online

ebhorsman.com

proud distributor

w w w . t n b . c a

Ty-Rap®

Catamount®

T&B®Fastening Products

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2-C3

Ty-Rap®Cable Ties

Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C4-C7

Identiﬁcation Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C8-C9

Speciality Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C10

Stripped-Coloured Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C11-C12

Cable Ties Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C13

Cable Ties for Special Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C14-C17

Ty-Rap®Stainless Steel Cable Ties and Accessories . . . . . . . . . . . . . . . . . . . . . . . . .C18-C28

SS - Two-Piece Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C19

TYS - Multi-LokTM Self-Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C20

SSR - Reusable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C21

SSH - Heavy Duty Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C22

Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C23-C24

Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C25

S.S. Tape Embossing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C26

LS - Heavy-Duty Ball-Lock Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C27

DELTEC™Cable Support System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C28-31

Ty-Rap®Hook and Loop Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C32

Material Selection Ordering Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C33-C36

Physical Properties of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C33

Chemical Resistance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C34-C36

Catamount®Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C37-C44

T&B®Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C45-C49

Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C45-C46

Double Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C47

Low-Proﬁle Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C48

Ski-Badge Holder Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C49

Ty-Rap®Cable Tie Mounting Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C50-C57

Ty-Rap®Cable Clamps and Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C58-C63

Ty-Rap®Harnessing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C64

Ty-Rap®Mounting Bases for Heavy-Duty Applications . . . . . . . . . . . . . . . . . . . . . . .C65-C66

Ty-Rap®Wire Protection Products

Split Loom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C67-C70

Braided Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C71-C73

Ty-Rap®Cable Tie Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C74-C77

Table of Contents

Ty-Rap®Fastening Products

Overview

Installers Know and Trust Ty-Rap®High-Performance Fastening

Products from Thomas & Betts

Wire bundling is an integral part of modern electrical and electronic installations. To finish your

harnessing and bundling project as reliably and economically as possible, choose genuine Ty-Rap®

cable ties. These fastening systems include a full range of cable ties, identification ties, clamps,

bases, harnessing aids and installing tools. Using Ty-Rap®fastening systems for all wiring jobs, large

and small, will speed and improve the reliability of harnessing and wire bundling while saving you

money.

•Harness Board pre-wiring prior to

installation

•Large OEMs-Automotive, Aerospace,

Computers, Electronics, Copiers,

Appliances and other Durable Goods

Harnessing

T&B®fastening systems for large volume cable tying combine high-speed

ergonomically designed automatic and semi-automatic tools, along with a wide

selection of ties and harnessing aids to meet your application requirements.

Accessories include various harnessing aids, retainers, supports, posts, pins and

guides that allow the wire to be quickly routed with or without the use of nails.

Point-to-point and Long Distance Wiring

•Bundling & fastening cables between equipment

•Panel & Machine Tool Builders

•Industrial & Commercial Applications, Refineries, Office

Buildings

Installers prefer the ease of use and exceptional durability of genuine

Ty-Rap®cable ties. Engineered for labor savings and high

performance, Ty-Rap®cable ties are commonly used in a variety of

applications. Standoffs, bulkhead mounting bases, adhesive mounting

bases and a wide variety of clamping devices will meet or exceed any

requirements. Weatherable and special material Ty-Rap®cable ties are

exceptionally suited for years of service in extreme environments.

•HVAC

•Recreational

•Telecom & Utility

•Packaging

Other Applications

Cable Fastening Accessories

Choose from one of the largest assortments of mounting bases, clips and clamps,

spacers, lashing straps, harness board accessories, braided wire sleeve, and

accessories for heavy-duty lashing. Use Thomas & Betts cable fastening accessories

for the finishing touch on your next wiring project.

Tools

Ty-Rap®installing tools finish the installation of the cable tie. Ties are cinched to the

proper tension and the excess tail is cut off precisely flush with the head, leaving no

sharp corners or ragged edges. Ty-Rap®installing tools have narrow noses and slim

profiles for work in tight spaces or between harness board nails. The operation is

quick, reliable and cost effective.

Ty-Rap®cable ties are remarkably well suited for a variety of other

non-electrical applications. Ty-Rap®cable ties exceed UL

requirements for smoke developed and heat release for use in air

handling spaces.

Ty-Rap®cable ties meet international standards such as CSA and CE

as well as UL, , Belcor, ADC and military specifications in North

America. T&B®also offers a complete stainless steel DeltecTM cable

fastening system for demanding and weather-resistant applications.

Choose genuine Ty-Rap®cable ties for the rugged “Grip of Steel®”.

Look for the oval head.

Trust Ty-Rap®to securely fasten your cables!

www.tnb.ca

Ty-Rap®Fastening Products

Overview

Rounded, Low Profile Head gives a

professional, quality look to wire

bundling projects. The classic-shaped

head is designed to prevent snags on

uneven surfaces and more easily pull

through bulkheads. There are no

sharp edges, so these ties are also

easier on the installer’s hands.

The Turned-up Tail orients the tie

for easy assembly, making the ties

easier to pick up on a flat surface.

No-Slip Tail provides easy grip during

tensioning. Ty-Rap®cable ties feature

a unique friction surface design that’s

appreciated by more tradespeople.

For a whole bundle of

reasons, trust

only Genuine

Ty-Rap®Cable Ties

by Thomas & Betts in your

next wiring installation.

When you choose a cable tie from T&B®, you can

count on quality, performance and innovation to

make your work easier. Depending on your

application, choose genuine Ty-Rap®Cable Ties,

along with our wide assortment of quality

accessories and installing tools to make

installation hassle-free.

“The Grip of Steel™” Non-Magnetic Stainless Steel

Locking Barb insures both maximum strength and the

right tightness every time. Because there are no

notches, Ty-Rap®Cable Ties provide an infinite number

of locking positions while fastening the tie at the precise

bundle diameter.

Versatile Nylon 6/6 Material provides high strength, a

wide temperature range and prevents toxic or irritating

emissions. Ty-Rap®Cable Ties are also available in

weather-resistant versions, heat-stabilized, flame-

retardant, Polypropylene, Nylon12, Fluoropolymer, Halar,

and Stainless Steel materials for a variety of extreme

environments.

Smooth, Notchless Body reduces stress concentration

points under tension, making the tie stronger and

thinner than notched body ties.

Ribbed and Stippled Body

“grips” the bundle and prevents

slippage. Rounded edges protect

insulation, preventing sharp

edges from damaging cables.

Why Choose Genuine Ty-Rap®Cable Ties?

www.tnb.ca

Fastening Products

TY523M

Tie body width 0.091 in.

TY524

Tie body width 0.140 in.

TY525M

Tie body width 0.184 in.

TY5272M

Actual size body width 0.270 in.

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Military

Standard

Part No.

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Standard Nylon 6/6 Cable Ties

TY523M TY23M

0.09/2.29

3.62/91.95 0.63/16.00 MS3367-4

18/80.07

100 1,000

TY52315M TYB2315M 7.00/177.80 1.50/38.10 –

TY5232M TY232M 8.00/203.20 2.00/50.80 –

TY5234M TY234M 14.00/355.60 4.00/101.60 –

TY524M TY24M

0.14/3.56

5.50/139.70 1.13/28.70 MS3367-5

40/177.90

TY5242M TY242M 8.19/208.03 2.00/50.80 –

TY526M TY26M 11.10/281.94 3.00/76.20 –

30/133.40

TY5244M TY244M 14.50/368.30 4.00/101.60 –

TY525M TY25M

0.19/4.83

7.31/185.67 1.75/44.45 MS3367-1

50/222.40

TY5253M TY253M 11.60/294.64 3.00/76.20 MS3367-7

TY528M TY28M 14.20/360.68 4.00/101.60 MS3367-2

TY5272M* TY272M*

0.27/6.86

8.75/222.25 2.00/50.80 –

120/533.80

500

TY527M* TY27M 13.40/340.36 3.50/88.90 MS3367-3

TY5275M TY275M 18.00/457.20 5.00/127.00 –

TY5277M TY277M 24.30/617.22 7.00/177.80 –

TY529M TY29M 30.00/762.00 9.00/228.60 MS3367-6

TY53510M** –

0.32/8.13

35.00/889.00 10.00/254.00 –

175/778.40 –

TY54513M** – 45.00/1143.00 13.00/330.20 –

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use in temperatures ranging from 185ºF to -40ºF (85°C to -40°C).

CSA Certified. Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010 (3), (4) and (5), and 12-020 of the CEC.

* Not CSA Certified.

Cable Ties

w w w . t n b . c a

Ty-Rap®

Fastening Products

TY523MX

Tie body width 0.091 in.

TY524MX

Tie body width 0.140 in.

TY525MX

Tie body width 0.184 in.

TY5272MX

Actual size body width 0.270 in.

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Military

Standard

Part No.

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Nylon 6/6 – Weather-Resistant

TY523MX TY23MX

0.09/2.29

3.62/91.95 0.63/16.00 MS3367-4

18/80.07

100 1,000

TY52315MX TYB2315MX 7.00/177.80 1.50/38.10 –

TY5232MX TY232MX 8.00/203.20 2.00/50.80 –

TY5234MX TY234MX 14.00/355.60 4.00/101.60 –

TY524MX TY24MX

0.14/3.56

5.50/139.70 1.13/28.70 MS3367-5

40/177.90

TY5242MX TY242MX 8.19/208.03 2.00/50.80 –

TY526MX TY26MX 11.10/281.94 3.00/76.20 –

30/133.40

TY5244MX TY244MX 14.50/368.30 4.00/101.60 –

TY525MX TY25MX

0.19/4.83

7.31/185.67 1.75/44.45 MS3367-1

50/222.40

TY5253MX TY253MX 11.60/294.64 3.00/76.20 MS3367-7

TY528MX TY28MX 14.20/360.68 4.00/101.60 MS3367-2

TY5272MX†TY272MX†

0.27/6.86

8.75/222.25 2.00/50.80 –

120/533.80

500

TY527MX†TY27MX 13.40/340.36 3.50/88.90 MS3367-3

TY5275MX TY275MX 18.00/457.20 5.00/127.00 –

TY5277MX TY277MX 24.30/617.22 7.00/177.80 –

TY529MX TY29MX* 30.00/762.00 9.00/228.60 MS3367-6

TY53510MX** –

0.32/8.13

35.00/889.00 10.00/254.00 –

175/778.40 –

TY54513MX** – 45.00/1143.00 13.00/330.20 –

* For military compliance of weather-resistant black 120 lb. ties, replace suffix X with O (i.e. TY27M-0).

†Not Listed or Recognized Models or CSA Certified.

CSA Certified. Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010 (3), (4) and (5), and 12-020 of the CEC.

The MX Series cable ties are recommended for outdoor use.

ULTRAVIOLET

RESISTANT

Cable Ties

w w w . t n b . c a

Ty-Rap®

Fastening Products

Natural nylon is standard. For coloured Ty-Rap®ties, add the following suffix numbers to catalogue numbers.

Example: TY25M-2 would be red TY25M. (Consult Regional Sales Office for ordering information.)

How to Order Coloured

Ty-Rap®Cable Ties

and Accessories

Std. Pkg.

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Ty-Rap®Nylon 6/6 Cable Tie – Colour Assortment

TY525M-CLRS 0.19/4.83 7.31/185.67 1.75/44.45 50/222.40 10

Cable ties are same size as TY525M shown above. 10 ties in each colour (black, brown, red, orange, yellow, green, blue, purple,

grey & white) are packaged. 100 total cable ties per package.

Std.

Cat. No.

Bulk

Cat. No. Description Length

(in./mm)

Tensile

Strength

(lb./N)

Bulk

Pkg.

– TY525M-CLRS Multi-Coloured Natural Nylon (10 each of standard ten colours)

7.31/185.67 50/222.40

100 ties

– TY25M-0 Black, Natural Nylon

1,000 Ties

– TY25M-1 Brown, Natural Nylon

– TY25M-2 Red, Natural Nylon

– TY25M-3 Orange, Natural Nylon

– TY25M-4 Yellow, Natural Nylon

– TY25M-5 Green, Natural Nylon

– TY25M-6 Blue, Natural Nylon

– TY25M-7 Purple, Natural Nylon

– TY25M-8 Grey, Natural Nylon

– TY25M-9 White, Natural Nylon

The colours you need in convenient packs!

Ty-Rap®Nylon 6.6 Cable Ties – Colour Assortment

•Construction – nylon 6.6, 316 stainless steel locking device

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC)

•UL Listed Natural 6.6 Nylon Cable Ties are suitable for use in air handling

spaces (plenums) in accordance with Section 300.22 (C) & (D) of the National

Electrical Code

Colour Sufﬁx No. Colour Sufﬁx No. Colour Sufﬁx No. Colour Sufﬁx No.

Black X Red 2 Green 5 Grey 8

(outdoor) Orange 3 Blue 6 White 9

Brown 1 Yellow 4 Purple 7

•100 standard ties in black, brown, red, orange, yellow, green, blue, purple,

grey and white (10 each)

•Recommended tooling – ERG-50, WT1-TB

Cable Ties

www.tnb.ca

Ty-Rap®

Fastening Products

The MX series cable ties are recommended for

outdoor use.

TY533M

TY534M

TY537M

Great for use with screws, nuts and bolts for

secure fastening to surfaces.

TY535M

TY5354M

TY534MX

TY535MX

TY5354MX

TY537MX

TY533MX

TY554M

TY538M

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Mounting

Hole

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Mounting Head Cable Ties

TY533M TY33M 0.09/2.29 4.00/101.60 0.63/16.00 #4 18/80.07

100

1,000

TY534M TY34M 0.14/3.56 6.00/152.40 1.13/28.70 #8 40/177.90

TY535M TY35M 0.18/4.57 7.80/198.12 1.75/44.45 #10

50/222.40

TY5354M TY354M 14.60/370.84 4.00/101.60 #10

TY1435M –

0.19/4.83 7.80/198.12 1.77/44.96

0.248 –

TY635M – 0.138

TYF535M TYF35M 7.24/183.90 0.138 100

TY537M TY37M 0.30/7.62 13.90/353.06 3.50/88.90 1/4 120/533.80 50 500

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use

in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Mounting

Hole

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Push Mount Cable Ties

TY554M TY54M 0.14/3.56 5.96/151.38 1.13/28.70 3/16 40/177.90 100 1,000

TY538M TY38M* 0.18/4.57 7.80/198.12 1.75/44.45 1/4 50/222.40

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use

in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).

* Nylon 6/6 UV weather-resistant version available (TY38MX).

For use in 3/16 in. and 1/4 in. pre-drilled holes.

Thickness panel 0.094 max. (TY554M)

Range 0.04 - 0.156 (TY538M)

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Mounting

Hole

Tensile

Strength

(lb.N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Nylon 6/6 Weather-Resistant

TY533MX TY33MX 0.09/2.29 4.00/101.60 0.63/16.00 #4 18/80.07

100 1,000

TY534MX TY34MX 0.14/3.56 6.00/152.40 1.13/28.70 #8 40/177.90

TY535MX TY35MX 0.18/4.57 7.80/198.12 1.75/44.45 #10 50/222.40

TY5354MX TY354MX 14.60/370.84 4.00/101.60 #10

TY537MX TY37MX 0.30/7.62 13.90/353.06 3.50/88.90 1/4 120/533.80 50 500

www.tnb.ca

Ty-Rap®

Fastening Products

TY551M

TY5512M

TY553M

TY5532M

TY153M

TY546M

TY548M

TY546MD

TY546MT

TY546MF

Thomas & Bett’s Custom Heat Stamping provides an economical way to

fasten and identify cable bundles. Mark nylon cable ties, identification cable

ties, and identification plates to suit your application.

•1/16 in., 1/8 in., 3/16 in. characters available

•Standard Type: Gothic Capitol

•Character sizes can be mixed from line to line on Identification cable ties

•Alphanumeric and Sequential numbering available

•Six digit sequential numbering available in 1/8" characters

•Eight digit sequential numbering available in 1/16" and 3/16" characters

•The following colours of heat stamping are available – Black, Blue, Green,

Red, Yellow, Orange and White

•Special logos and different type styles can be accommodated when

camera ready artwork is provided

•Minimum order quantity is 3000 pieces per catalogue number and

message

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Military

Standard

Part No.

Marking Pad

Size (in.)

W x H

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Identification Cable Ties

TY551M TY51M

0.09/2.29

3.60/91.44 0.63/16.00 MS3368-5 1 x 0.313

18/80.07

100

500

TY5512M TY512M 8.30/210.82 2.00/50.80 – 1 x 0.313 1,000

TY553M TY53M 4.00/101.60 0.63/16.00 – 0.813 x 0.359 50 500

TY5532M TY532M 8.40/213.36 2.00/50.80 – 0.813 x 0.359 100 1,000

– TY153M 0.10/2.54 4.35/110.49 0.63/16.00 – 0.781 x 1 – 500

TY546M TY46M 0.18/4.57 7.10/180.34 1.75/44.45 MS3368-1 0.5 x 0.875

50/222.40

100 1,000

TY548M TY48M

0.19/4.83

14.20/360.68 4.00/101.60 MS3368-2 0.5 x 2.125

TY546MD TY46MD

7.25/184.15 1.75/44.45

MS3368-3 1.172 x 1 50

500

TY546MT TY46MT MS3368-4 1.210 x 1 100

TY546MF TY46MF – 2.48 x 1 –

Self-locking Ty-Rap®identification ties are available in both single and multiple configurations. They may be

marked with the special Thomas & Betts black or red marking pen which produces a permanent legend, or

they can be heat stamped. Because the ties serve the dual purpose of tying and identifying, you will achieve

extra economies. They can be applied with the standard Ty-Rap® tying tools used for regular ties.

Nylon 6/6 UV weather-resistant version available (add suffix “-x”).

Contact your Regional Sales Ofﬁce for pricing, availability, quotation and order entry.

Identiﬁcation Cable Ties

Custom Heat Stamping

www.tnb.ca

Ty-Rap®

Fastening Products

Snaps onto the head of a conventional

cable tie to convert it to an identification

tie.

•When snapped onto the tie head, the tag

is conveniently held in place until it is

permanently fastened

•Offers maximized inventory control

because the I.D. tag will accommodate

different tie lengths and materials

• Allows marking and bundling to be done in

one operation

•The marking can be made with a

Thomas & Betts permanent marking pen

(black or red); catalogue numbers:

WT163M-1 (black), WT163M-3 (red)

•

The identification tags are sold separately

and can be conveniently snapped on the

cable ties at the assembly location just

before being installed on the bundle

Std.

Cat. No.

Bulk

Cat. No. Description

Marking

Pad Size

(in.)

W x H

Std.

Pkg.

Bulk

Pkg.

Snap-On Identification Marker Tag

TC523 Snaps onto the heads of all miniature 18 lb. series cable ties 1 x 0.35

100 1,000

TC524 TC24 Snaps onto the heads of all intermediate 30 and 40 lb. series cable ties 1 x 0.50

TC525 Snaps onto the heads of all standard 50 lb. series cable ties 1 x 0.50

Note: Made of natural nylon 6/6.

Identiﬁcation Cable Ties

w w w . t n b . c a

Ty-Rap®

Cat. No. Ink Colour Std.

Pkg.

Ty-Rap® Marker pencils

WT163M-1 Black 100

WT163M-3 Red

Note: Permanent, fine point.

C10

Fastening Products

This Ty-Rap®brand cable tie lets you secure wire

bundles up to 1-3/4 inches in diameter to all

masonry surfaces. It is equipped with a masonry

plug which is driven into the drilled hole. Once

installed, the tail is looped through the head to

provide a neat, safe, low-profile installation. It is

made of black, weather-resistant nylon.

The Drive-TyTM cable tie gives you a fast, safe

means of securing cables to wood surfaces.

•One-piece design, fast and convenient to use

•Lowers your installed cost

•Clamping range of 1/16 to 2 -3/8 inches

reduces your inventory – one clamp replaces

many

•Visually attractive – head resembles rivet

•Locking grooves maintain tight grip

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Reusable Ty-Rap®Cable Ties

TYR505 0.18/4.57 7.50/190.50 1.75/44.45 50/222.40 100

TYR508 14.30/363.22 4.00/101.60

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended

for use in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).

Cat. No.

Body

Width

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Masonry

Hole

Size

Pullout

Force

Std.

Pkg.

Plug-TyTM Cable Tie for Masonry Surfaces

TY544MX 0.18/4.57 1.75/44.45 1/4 25 50

Cat. No.

Body

Width

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Pullout

Force

Std.

Pkg.

Drive-TyTM Cable Tie

TY545MX 0.18/4.57 1.75/44.45 25 50

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Hole

Size

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Universal Button Head Cable Tie

TY541M TY41M

0.23/5.84

9.60/243.84 2.37/60.20

0.32-0.68 65

1,000

650-41600 – 10.25/260.35 2.50/63.50 500

696-41848 – 12.50/317.50 3.00/76.20

Note: Loop tie through hole in frame, around electrical, hydraulic, or air hoses to be clamped, and through head.

Tighten and cut off with Ty-Rap®tool. Visually looks like a rivet.

Speciality Cable Ties

www.tnb.ca

Ty-Rap®

C11

Fastening Products

Designed primarily for P.I.C. and station cable binder marking,

these self-locking ties install without tools in less than

10 seconds. Compared to an installation time of 30–60

seconds using the twisted wire method, the time saving is

substantial. High-contrast colour stripes extend to end of tail

for instant, permanent identiﬁcation of binder.

Std.

Cat. No.

Bulk

Cat. No.

Tie

Colour

Stripe

Body Width

(in./mm)

Length

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Striped-Coloured Ty-Rap®Cable Ties for Identification Telephone Cable Binder

696-40527-0C 696-40527-0C Black –

0.09/2.29 3.62/91.95 18/80.07

Order per bag

1 bag = 50 cable ties

Sold in Multiple of 20

1,000

696-40527-1-0C 696-40527-1-0

Brown

Black

696-40527-1-2C 696-40527-1-2 Red

696-40527-1-4C 696-40527-1-4 Yellow

696-40527-1-7C 696-40527-1-7 Violet

696-40527-1-9C 696-40527-1-9 White

696-40527-2C 696-40527-2 Red –

696-40527-3-0C 696-40527-3-0

Orange

Black

696-40527-3-2C 696-40527-3-2 Red

696-40527-3-4C 696-40527-3-4 Yellow

696-40527-3-7C 696-40527-3-7 Violet

696-40527-3-9C 696-40527-3-9 White

696-40527-4C 696-40527-4 Yellow –

696-40527-5-0C 696-40527-5-0

Green

Black

696-40527-5-2C 696-40527-5-2 Red

696-40527-5-4C 696-40527-5-4 Yellow

696-40527-5-7C 696-40527-5-7 Violet

696-40527-5-9C 696-40527-5-9 White

696-40527-6-0C 696-40527-6-0

Blue

Black

696-40527-6-2C 696-40527-6-2 Red

696-40527-6-4C 696-40527-6-4 Yellow

696-40527-6-7C 696-40527-6-7 Violet

696-40527-6-9C 696-40527-6-9 White

696-40527-8-0C 696-40527-8-0

Slate

Black

696-40527-8-2C 696-40527-8-2 Red

696-40527-8-4C 696-40527-8-4 Yellow

696-40527-8-9C 696-40527-8-9 White

Cat. No. Description Std.

Pkg.

Striped-Coloured Ty-Rap®Cable Tie Kits

696-40587 Pouch only

696-40587-1 Pouch with Ty-Rap®cable tie assortment 1 bag each of 50 each (1,250 total)

696-40587C Cloth pouch only

696-40587CF Cloth pouch with 1 bag of 50 each Ty-Rap®cable ties (1,250 total)

696-40587M Mini pouch only

696-40587MF Mini pouch filled with assortment of Ty-Rap®cable ties (50 each)

Stripped-Coloured Cable Ties

www.tnb.ca

Ty-Rap®

C12

Fastening Products

There is also available a plastic (Part# 650-40587) and canvas (Part# 650-40587-C) pouch

designed with 25 pockets to store the bi-coloured ties. Also available is a plastic mini-

pouch (Part# 650-40587-M) designed to fit into shirt pocket or over belt. Holds a maximum

of 5 plastic bags of 50 each of the bi-coloured ties.

Plastic and canvas pouches also available filled with bi-coloured ties.

Cat. No. 650-40587-1 (filled plastic pouch)

Cat. No. 650-40587-CF (filled canvas pouch)

Blue Tie

White Stripe

#696-40527-6-9-C

Orange Tie

White Stripe

#696-40527-3-9-C

Green Tie

White Stripe

#696-40527-5-9-C

Brown Tie

White Stripe

#696-40527-1-9-C

Slate Tie

White Stripe

#696-40527-8-9-C

Blue Tie

Red Stripe

#696-40527-6-2-C

Orange Tie

Red Stripe

#696-40527-3-2-C

Green Tie

Red Stripe

#696-40527-5-2-C

Brown Tie

Red Stripe

#696-40527-1-2-C

Slate Tie

Red Stripe

#696-40527-8-2-C

Blue Tie

Black Stripe

#696-40527-6-0-C

Orange Tie

Black Stripe

#696-40527-3-0-C

Green Tie

Black Stripe

#696-40527-5-0-C

Brown Tie

Black Stripe

#696-40527-1-0-C

Slate Tie

Black Stripe

#696-40527-8-0-C

Blue Tie

Yellow Stripe

#696-40527-6-4-C

Orange Tie

Yellow Stripe

#696-40527-3-4-C

Green Tie

Yellow Stripe

#696-40527-5-4-C

Brown Tie

Yellow Stripe

#696-40527-1-4-C

Slate Tie

Yellow Stripe

#696-40527-8-4-C

Blue Tie

Violet Stripe

#696-40527-6-7-C

Orange Tie

Violet Stripe

#696-40527-3-7-C

Green Tie

Violet Stripe

#696-40527-5-7-C

Brown Tie

Violet Stripe

#696-40527-1-7-C

Red Tie

Violet Stripe

#696-40527-2-C

PLASTIC & CANVAS POUCH LOADING DIAGRAM

Ty-Rap®

Ty-Pouch

Ty-Rap®

Mini pouch

Cat. No. 650-40587-M (Empty)

Cat. No. 650-40587-1 (Plastic Filled)

Cat. No. 650-40587 (Plastic Empty)

Cat. No. 650-40587CF (Canvas Filled)

Cat. No. 650-40587-C (Canvas Empty)

Stripped-Coloured Cable Ties

Bi-Coloured Ty-Rap®

www.tnb.ca

Ty-Rap®

C13

Fastening Products

Cat. No. Description Pkg.

Ty-Rap®Tote™4 in., 8 in. and 11 in. -14 in. Combination Length Cable Tie

Dispensers

TY-TOTE-25 Ty-Rap Tote™8 in. Cable Tie Dispenser (includes 1 pkg. TY525M)

TY-TOTE-23 Ty-Rap Tote™4 in. Cable Tie Dispenser (includes 1 pkg. TY523M)

TY-TOTE-28 Ty-Rap Tote™11 in.–14 in. Cable Tie Dispenser (includes 1 pkg. TY528M)

•Durable, lightweight polyester exterior and tough vinyl interior

construction

•Rugged diamond-shaped cutout for easy access to cable ties (up to 8 in.,

11 in. –14 in. lengths) and rectangular-shaped (for 4 in. length)

•Handy belt clip and chrome steel loop for easy attachment

•Resealable hook-and-loop ﬂap for easy reﬁll

•Includes 100 genuine Ty-Rap®cable ties

Order only genuine Ty-Rap®Cable Ties to reﬁll your dispenser!

Cable Ties Dispenser

Cable Ties at your ﬁngertips!

www.tnb.ca

Ty-Rap®

C14

Fastening Products

Available Materials 5 = Most Suitable 1 = Least Suitable

Heat

Weather Stabilized Flame Weather Weather

Natural Resistant Natural Retardant Resistant Resistant Fluoro- Stainless Weatherable

66 Nylon 66 Nylon 66 Nylon 66 Nylon Nylon 12 Polypropylene polymer Halar® Steel Acetal

Ultraviolet Resistance 1 4 1 1 4 4 5 5 5 4

Radiation Resistance 1 1 1 1 1 1 4 4 5 1

Low Temperature 3 3 3 2 4 3 4 4 5 4

High Temperature 3 3 4 3 2 2 4 4 5 2

Flammability 3 3 3 4 1 1 4 4 5 1

Tensile Strength 3 3 3 3 2 1 3 3 5 2

Relative Cost Low Low Low Med Med Low High High High High

Chemical Resistance See Table 3

TABLE 1

Thomas & Betts offers Ty-Rap®cable ties and accessories in a wide variety of materials,

each suited for specific environments. The purpose of this document is to assist you in

choosing the best material for your particular application. The effects of weathering, flame,

chemicals, extreme temperatures, and radiation on the different materials are clearly

presented in the following tables to simplify this process. Once you have determined the

most suitable material, you can choose from the wide variety of Ty-Rap®cable ties,

identification ties, mounting bases, lashing ties, etc., offered by Thomas & Betts.

How to use Table 1:

Table 1 simplifies the material selection process by giving the relative performance ratings of the materials offered by Thomas & Betts.

For example, if your application is in an extremely cold environment, four materials will answer your need: Fluoropolymer, nylon 12, Halar®(*),

and stainless steel. Then, cost may be your next most important criteria, so out of those four options, nylon 12 would be the most cost effective.

However, if tensile strength is important, then stainless steel would be the better choice.

Refer to tables 2 (page C33) and 3 (pages C34-C36) for more detailed information regarding physical properties of the materials and chemical

resistance of the materials respectively.

It is extremely difficult to provide data on all the possible combinations or conditions that can occur. This information is based on data provided

by the manufacturers of the specific materials listed and is provided only as a general guide. No specific recommendation is intended. As each

application may differ, cable tie samples should be tested in the intended application by the user to determine suitability.

* Halar®is the trademark of Solvay Solexis, Inc.

Cable Ties for Special Environments

Material Selection Ordering Guide

www.tnb.ca

Ty-Rap®

C15

Fastening Products

•Ideal for Industrial OEM and MRO (includes, but not limited to industrial, lawn/garden/farming

equipment, recreation vehicles, heavy equipment)

•Can be placed in environments requiring heat stabilization and UV resistance

•Provides a smooth, low-proﬁle look and offers unlimited tensioning range for a perfect ﬁt

•Features an oval head on every original Ty-Rap®Cable Tie

•Quicker to install and less expensive than metallic fasteners, lacing cord or tape

•Made of UV resistant, heat-stabilized nylon

Colour — Black

For use in temperatures ranging from

-40ºF to 221ºF (-40ºC to 105ºC)

Bulk

Cat. No.

Length

(in./mm)

Tensile Strength

(lb./N)

Bulk

Pkg.

Ty-Rap®Heat Stabilized/Ultraviolet Resistant Cable Ties

TY23MX-A 3.62/91.95 18/80.07

1,000

TY24MX-A 5.50/139.70 40/177.90

TY25MX-A 7.31/185.67 50/222.40

TY27MX-A 13.40/340.36 120/533.80 500

•Ideal for Industrial OEM and MRO (includes, but not limited to metal processing,

paper mills, lighting and commercial construction markets with high temperature

environments up to 302ºF (150ºC))

•Provides a smooth, low-proﬁle look and offers unlimited tensioning range for a

perfect ﬁt

•Features an oval head on every original Ty-Rap®Cable Tie

•Quicker to install and less expensive than metallic fasteners, lacing cord or tape

•Made of extra high-temperature resistant nylon

Colour — Light Green

For use in temperatures

ranging from -40° to 302ºF

(-40° to 150ºC)

Bulk

Cat. No.

Length

(in./mm)

Tensile Strength

(lb./N)

Bulk

Pkg.

Ty-Rap®Extra High-Temperature Cable Ties

TYHT23M 3.62/91.95 18/80.07

1,000

TYHT25M 5.50/139.70 40/177.90

TYHT27M 7.31/185.67 50/222.40

TYHT28M* 13.40/340.36 120/533.80 1,000

*UR Pending

Cable Ties for Special Environments

Perfect for outdoor applications!

Beat the heat!

w w w . t n b . c a

Ty-Rap®

C16

Fastening Products

Cat. No. Length

(in./mm)

Body

Width

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Base

Material

Std.

Pkg.

Ty-Rap®Detectable Cable Ties

TY523M-NDT 3.62/91.95 0.09/2.29 0.63/16.00 18/80

Nylon

100

TY525M-NDT 7.31/186.00 0.19/4.70 1.75/44.40 50/220

TY527M-NDT 13.40/340.00 0.27/6.86 3.50/89.00 120/540 50

TY528M-NDT 14.20/36.00 0.19/4.70 4.00/102.00 50/220

100TY523M-PDT 3.62/91.90 0.09/2.29 0.63/16.00 18/80

Polypropylene

TY525M-PDT 7.31/186.00 0.19/4.70 1.75/44.40 30/135

TY527M-PDT 13.40/340.00 0.27/6.86 3.50/89.00 60/267 50

TY528M-PDT 14.20/36.00 0.19/4.70 4.00/102.00 30/135 100

Detectable using metal detection and X-ray detection systems

and visions systems.

Polypropylene parts are also bouyant in liquid application.

Material — Polyamide (Nylon 6.6) or Polypropylene

Colour — Blue

For use in temperatures ranging from -40ºF to 185ºF

(-40ºC to 85ºC).

Cat. No. Length

(in./mm)

Body

Width

(in./mm)

Max. Wire

Bundle

Dia.

(in./mm)

Marking Pad Size

(in./mm)

W x H

Tensile

Strength

(lb./N)

Std.

Pkg.

Ty-Rap®Cable Ties – Flame Retardant Nylon 6.6

TY23MFR 3.62/91.95 0.09/2.29 0.63/16.00

N/A

18/80.07

1,000

TY232MFR 8.00/203.20 0.09/2.29 2.00/50.80

TY24MFR 5.50/139.70 0.14/3.56 1.13/28.70 40/177.90

TY25MFR 7.31/185.67 0.18/4.57 1.75/44.45 50/222.40

TY28MFR 14.20/360.68 0.18/4.57 4.00/101.60

TY272MFR†8.00/203.20 0.27/6.86 2.00/50.80 120/533.80

500

TY27MFR 13.20/335.28 0.27/6.86 3.50/88.90

TY53MFR 4.00/101.60 0.09/2.29 0.63/16.00 0.81 x 0.36/20.57 x 9.1 18/80.07

TY153MFR 4.35/110.49 0.10/2.54 0.63/16.00 0.78 x 1/19.81 x 14.00

Make safety a priority!

This material meets UL 94V-O ﬂammability rating.

Colour — White

For use in temperatures ranging from -40ºF to 185ºF

(-40ºC to 85ºC).

† Not Recognized Models.

Std.

Cat. No.

Bulk

Cat. No.

Length

(in./mm)

Body

Width

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Nylon 12 Cable Ties – Ultraviolet and weather-resistant!

TYC525MX TYC25MX 7.31/185.67 0.18/4.57 1.75/44.45 35/155.70 100 1,000

– TYC28MX 14.20/360.68 4.00/101.60 –

– TYC272MX 8.00/203.20 0.27/6.86 2.00/50.80

85/378.10 500TYC527MX TYC27MX 13.20/335.28 3.50/88.90 50

– TYC29MX 30.00/762.00 0.30/7.62 9.00/228.60 –

This material provides very good resistance to ultraviolet light

and chemical exposure. Nylon 12 is a lower, moisture-

absorbing material than 6.6 nylon and the effect of water on

properties is much less.

Colour — Black

For use in temperatures ranging from -40ºF to 185ºF

(-40ºC to 85ºC).

Cat. No. Length

(in./mm)

Body

Width

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Ty-Rap®Heat Stabilized Ties

TYH23M 3.62/91.95 0.09/2.29 0.63/16.00 18/80.07

1,000

TYH232M 8.00/203.20 2.00/50.80

TYH24M 5.50/139.70

0.14/3.56

1.13/28.70 40/177.90

TYH242M 8.19/208.03 2.00/50.80

TYH26M 11.10/281.94 3.00/76.20 30/135

TYH25M 7.31/185.67

0.18/4.57

1.75/44.45

50/222.40TYH253M 11.40/289.56 3.00/76.20

TYH28M 14.20/360.68 4.00/101.60

TYH27M 13.20/335.28 0.27/6.86 3.50/88.90

120/533.80 500TYH272M 8.75/222.25 2.00/50.80

TYH29M 30.00/762.00 0.30/7.62 9.00/228.60

Engineered to withstand high temperatures!

Material meets ASTM D4066 PA121.

Colour — Green Tint

For use in temperatures ranging from -40ºF to 221ºF

(-40ºC to 105ºC).

www.tnb.ca

Ty-Rap®

C17

Fastening Products

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Ty-Rap®Weather-Resistant Polypropylene Ties

TYP23MX 0.09/2.29 3.62/91.95 0.63/16.00 18/80.07

1,000TYP25MX 0.18/4.57 7.01/178.05 1.75/44.45 30/133.40

TYP28MX 13.92/353.57 4.00/101.60

TYP27MX 0.27/6.86 13.17/334.52 3.5088.90 60/266.90 500

Many factors combine to determine the useful life of a cable

tie, but none is as important as chemical exposure.

Polypropylene cable ties are ideally suited for chemical

environments.

Ty-Rap®cable ties, made of Halar®, are designed for use in

air-handling spaces. Due to its UL 94V-O flammability rating

and low-smoke density characteristics, Halar®material is

most suitable in applications where flame resistance and

smoke generation is a concern.

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Lentgh

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Ty-Rap®Nylon 12 Cable Ties – Ultraviolet and weather-resistant!

TYZ523M** TYZ23M** 0.09/2.29 3.62/91.95 0.625 18/80.07

100 1,000

TYZ525M(1) TYZ25M(1) 0.18/4.57 7.31/185.67 1.750 50/222.40

TYZ528M TYZ28M 0.18/4.57 14.19/360.43 4.000 50/222.40 500

TYZ527M TYZ27M 0.27/6.86 13.38/339.85 3.500 120/533.80 50 100

Fluoropolymer cable ties offer high-radiation resistance and

temperature stability to 338°F. Also, fluoropolymer provides

excellent resistance to ultraviolet light and meets UL

flammability rating 94V-O.

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Bulk

Pkg.

Halar®* Cable Ties

TYV523M** TYV23M** 0.09/2.29 3.62/91.95 0.63/16.00 18/80.07 100 1,000

TYV525M(1) TYV25M(1) 0.18/4.57 7.31/185.67 1.75/44.45 50/222.40

* Solvay Solexis, Inc. registered trademark.

Colour – Maroon

** CSA Certified Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010

(3), (4) and (5), and 12-020 of the CEC.

(1)

Colour – Aqua

** CSA Certified Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules

12-010 (3), (4) and (5), and 12-020 of the CEC.

(1)

Cable Ties for Special Environments

Colour – Black

www.tnb.ca

Ty-Rap®

C18

Fastening Products

Squeeze the handle of the tool to create the dual

lock and cut off the tail.

The cable tie forms a low-profile dual lock.

After wrapping the object to be tied, insert the free

end of the tie through the buckle and into the tool.

•The tail is formed into a fold lock behind the buckle

•The tool forces a dimple in the band into a hole in the buckle

Dual Lock

Thomas & Betts has a complete package of stainless steel cable ties and

accessories that are easy to apply and superior in quality. These products

have been designed for tying, lashing and identification applications in

demanding environments such as boiler rooms, chemical plants, refin eries,

pulp/paper mills, shipyards and offshore oil platforms. They are made of a

variety of high-quality stainless steel materials which offer excellent

corrosion resistance, high temperature and durability charac teristics. There

is also a variety of high-quality installation and identification tools to

complete your cable tie accessory needs.

For cable bundling, I.D. tags and other general bundling applications –

especially in hazardous environments – Thomas & Betts Stainless Steel

Cable Ties provide a strong, safe, permanent installation with a unique, dual

lock.

The Type 304 stainless steel ties are completely fireproof – no toxic fumes,

no sagging cables. They are extremely resistant to corrosion and UV light,

with the ability to withstand the harshest temperature extremes. Yet they

are surprisingly economical.

The low-profile ties are fast and easy to apply. A quick squeeze of the

installation tool forms two strong locks– a dimple lock and a fold lock.

Their two-piece configuration adds to its versatility. Available in standard

lengths to wrap bundle diameters from 1 to 10 inches, Thomas & Betts

Stainless Steel Cable Ties can be supplied in other lengths on special order.

Low-profile Thomas & Betts Stainless Steel Ties are fireproof and resist

corrosion, UV light and extreme weather conditions for safe, permanent

cable bundling.

Installation Hand Tool

The installation hand tool is a lightweight, pocket size hand tool which

quickly and easily applies the stainless steel cable ties.

To use, simply separate the pull-up handle from the body, push the release

lever down and insert the clamp tail as far as possible. Squeeze the pull-up

handle until the band is tight. Finally, move the pull-up handle to the

locking/cut-off position by moving it away from the body as far as it will go.

Then squeeze to form the dual lock and cut off the excess tail.

Cat. No.

For Bundle

Dia. of

(in./mm)

Tensile

Strength

(lb./N)

Width

(in./mm)

Length

(in./mm)

Weight

(lb./kg)

SS10-250 2/51 200/890 0.25/6.35 10.0/254 1.1/4.89

SS17-250 4/101 200/890 0.25/6.35 16.5/419 1.8/8.00

Bundle Diameter Tensile Strength Width Length Weight

CABLE TIE TYPE

SS = Two-piece solid stainless steel cable tie, Type 304

TYS = Multi-lock stainless steel cable tie, Type 316

SSR = Reusable stainless steel cable tie, Type 200/300

SSH = Heavy-duty stainless steel clamp, Type 201

TS = Roller bar locking stainless steel cable tie, Type 302/304

LS = Ball locking stainless steel cable tie, Type 302/304/316

Stainless Steel Cable Ties and Accessories

Catalogue Number System

www.tnb.ca

Ty-Rap®

C19

Fastening Products

Strong, slip-free ties with

a unique dual lock

Cat. No.

For Bundle

Dia. of

(in./mm)

Tensile

Strength

(lb./N)

Width

(in./mm)

Length

(in./mm)

Weight

(lb./kg)

Std.

Pkg.

Mini Stainless Steel Cable Ties

SS7-180 1/25

100/444.8 0.18/4.5

6.5/165 0.70/0.32

100

SS10-180 2/51 10.0/254 0.90/0.41

SS16-180 4/102 16.0/406 1.40/0.64

SS23-180 6/152 22.5/572 1.85/0.84

SS29-180 8/203 29.0/737 2.35/1.07

Standard Stainless Steel Cable Ties

SS10-250 2/51

250/1,112 0.25/6.35

10.0/254 1.10/0.50

100

SS17-250 4/102 16.5/419 1.80/0.82

SS23-250 6/152 22.5/572 2.50/1.13

SS29-250 8/203 29.0/737 3.20/1.45

SS35-250 10/254 35.0/889 3.80/1.72

304 Stainless Steel

0.015 in. (0.38mm) Thickness

NOTE: Other lengths available on special request.

Add suffix -316 for 316 Stainless Steel.

Perfect for mini-sized

stainless steel ties

•Pocket-sized, light

weight

•Applies mini-size stain

less steel ties

Cat. No. Description Weight

(lb./kg)

Std.

Pkg.

WTA290

Hand tool to apply mini stainless steel cable ties;

easy-to-use tool applies tension, locks tie with

the dual lock, and cuts off band flush with top

surface of buckle

1.17/0.53 1

Cat. No. Description Weight

(lb./kg)

Std.

Pkg.

WTA250

Hand tool to apply standard stainless steel cable

ties; easy-to-use tool applies tension, locks tie

with the dual lock, and cuts off band flush with

top surface of buckle

1.17/0.53 1

SS - Two-Piece Solid

Pocket-sized hand tool

for quick and easy cable

tie installations

•Lightweight

•Applies standard-size

stainless steel ties

Stainless Steel Cable Ties and Accessories

•Low-profile, single wrap ties

•Dual locking mechanism

•No slipping

Mini Tie Installation Tool

Standard Tie

Installation Tool

www.tnb.ca

Ty-Rap®

C20

Fastening Products

Strong — holds in excess of 200 lb. —

and self locking

•Corrosion-resistant, providing a

safe, strong, worry-free hold

•Unique, self-locking, multiple–

locking system holds in excess of 200 lb.

•Manufactured from Type 316

stainless steel

•Available in two widths and various

lengths

Cat. No.

Tensile

Strength

(lb./N)

Width

(in./mm)

Length

(in./mm)

Weight

(lb./kg)

Std.

Pkg.

Type 316 Stainless Steel – Uncoated

TYS6-280

250/1,112

0.28/7.00

6/150 0.66/0.30

100

TYS9-280 9/225 0.99/0.45

TYS12-280 12/300 1.32/0.60

TYS18-280 18/450 1.76/0.80

TYS24-280 24/610 2.64/1.20

TYS6-470

0.47/12.00

6/150 1.10/0.50

TYS9-470 9/225 1.65/0.75

TYS12-470 12/300 2.20/1.00

TYS18-470 18/450 2.97/1.35

TYS24-470 24/610 4.29/1.95

0.010 in. (0.245mm) Thickness

•Nylon 11 weather-resistant coating is

unaffected by UV sunlight, resistant to

corrosion, chemicals, weathering and

protects cable insulation

•Coated with halogen-free, non-toxic

black nylon 11

How it works:

As the free end of the Multi-

Lok tie passes through the

buckle, three separate teeth

(four teeth in the 12mm

Multi-Lok) mesh with

corresponding slots in the

band, automatically locking

the tie as it is being

tensioned.

Cat. No.

Tensile

Strength

(lb./N)

Width

(in./mm)

Length

(in./mm)

Weight

(lb./kg)

Std.

Pkg.

Type 316 Stainless Steel – Nylon 11 Coated

TYS6-280C

250/1,112

0.28/7.00

6/150 0.66/0.30

100

TYS9-280C 9/225 0.99/0.45

TYS12-280C 12/300 1.32/0.60

TYS18-280C 18/450 1.76/0.80

TYS24-280C 24/610 2.64/1.20

TYS6-470C

0.47/12.00

6/150 1.10/0.50

TYS9-470C 9/225 1.65/0.75

TYS12-470C 12/300 2.20/1.00

TYS18-470C 18/450 2.97/1.35

TYS24-470C 24/610 4.29/1.95

0.010 in. (0.245mm) Thickness

Stainless Steel Cable Ties and Accessories

TYS - Multi-LokTM Self-Locking

www.tnb.ca

Ty-Rap®

C21

Fastening Products

Ties to use and reuse with quickness and ease!

•Made of high-strength, corrosion-resistant 200/300 Series

stainless steel

•Coated with a non-toxic, halogen-free, low-smoke Nylon 11,

protecting cables from damage or interference due to direct

contact with the stainless steel

•Nylon 11 is also chemical and weather-resistant, UV-protective,

extremely flexible at low temperature, user-friendly on installer’s

hands and easy on bundles

•Unique buckle design for quick, easy application and re-use

1. Insert cable tie tail through holding tabs and locking emboss.

2. Bend cable tie tail up.

3. Insert cable tie tail back through holding tabs, creating as tight a

bend as possible. For increased tensile strength follow steps #4

and #5.

4. Bend cable tie tail up.

5. Fold cable tie tail over holding tabs.

Cat. No.

Tensile

Strength

(lb./N)

Width

(in./mm)

Length

(in./mm)

Weight

(lb./kg)

Std.

Pkg.

Reusable Stainless Steel Cable Ties – Coated

SSR6-250C

75/333.60 0.25/6.35

6/152 1.4/0.64

100

SSR9-250C 9/229 1.8/0.82

SSR12-250C 12/305 2.1/0.95

SSR18-250C 18/457 3.0/1.36

SSR24-250C 24/610 3.7/1.68

SSR6-375C 6/152 1.8/0.82

SSR9-375C

100/444.80 0.38/9.53

9/229 2.0/0.91

SSR12-375C 12/305 3.1/1.41

SSR18-375C 18/457 4.4/2.00

SSR24-375C 24/610 6.6/2.99

SSR30-375C 30/762 7.0/3.18

SSR36-375C 36/914 8.3/3.76

Cat. No. Description Weight

(lb./kg)

Std.

Pkg.

Tensioning Tools

WTAE200 Cable Tie Tensioner: For tensioning Reusuable Ties and Multi-Lok Ties 0.6/0.27

WTAE201 Tensioning Hook: For tensioning Reusuable Ties and Multi-Lok Ties 0.1/0.05

DAS250 Pistol Grip Tensioning Tool: For installing Multi-Lok , Ball Lock, & Roller Bar Lock SS Ties 1.0/0.45

WTAE200

Cable Tie Tensioner

WTAE201

Tensioning Hook

DAS250

Pistol Grip Tensioning Tool

Stainless Steel Cable Ties and Accessories

SSR - Reusable

w w w . t n b . c a

Ty-Rap®

(WTAE tools for use with type TYS – TYS C Series Cable ties)

C22

Fastening Products

Pre-assembled for

single or double

wrapping!

Cat. No.

Max. Dia.

Once Around

(in./mm)

Max. Dia.

Twice Around

(in./mm)

Total

Length

(in./mm)

Tensile Strength

Single Wrap

(lb./N)

Band

Width

(in./mm)

Band

Thickness

(in./mm)

Weight

(lb./kg)

Std.

Pkg.

Heavy-Duty Free-End Stainless Steel Clamps — Type 201

SSH10-250 2/50 – 10/25 450/2002 0.25/6.35 0.02/0.51 2.2/1.00

100

SSH16-250 3.5/88 1.5/38 16/40 3.1/1.41

SSH16-375 900/4003 0.38/9.53 0.03/0.76 6.2/2.81

SSH18-500 4/101 2/50 18/45 1,400/6228 0.5/12.70 10.5/4.76

SSH19-250 5/127 2.5/63 19/48 450/2002 0.25/6.35 0.02/0.51 3.5/1.59

SSH21-625 5/127 2.5/63 21/53 1,700/7562 0.63/15.88 0.03/0.76 15.1/6.85

SSH24-750 6/152 3/76 24/60 2,000/8896 0.75/19.05 10.9/4.94 50

SSH27-250 7/177 3.5/88 27/68 450/2002 0.25/6.35 0.02/0.51 4.6/2.09 100

SSH31-500 8/203 4/101 31/78 1,400/6228 0.5/12.70 0.03/0.76 4.7/2.13 25

SSH34-250 9/228 4.5/114 34/86 450/2002 0.25/6.35 0.02/0.51 5.6/2.54 100

SSH37-750 10/254 5/127 37/93 2,000/8896 0.75/19.05

0.03/0.76

7.6/3.45

SSH44-375 12/304 6/152 44/112 900/4003 0.38/9.53 3.6/1.69

SSH50-750 14/355 7/177 50/127 2,000/8896 0.75/19.05 9.7/4.40

SSH56-625 16/406 8/203 56/142 1,700/7562 0.63/15.88 9.0/4.08

SSH62-750 18/457 9/228 62/157 2,000/8896 0.75/19.05 11.6/5.26

SSH69-625 20/508 10/254 69/175 1,700/7562 0.63/15.88 10.7/4.86

Type 201 Stainless Steel

Other Free-End Clamp sizes and metals are available on special order.

Apply tension, cut and secure with confidence!

Cat. No. Description Weight

(lb./kg)

Std.

Pkg.

Installation Tools

WTJ020 Compact Free End Stainless Steel Cable Tie Installion Tool for 1/4 in. to 3/8 in. sizes 1.1/0.50

WTC075 Pistol Grip Free End Stainless Steel Cable Tie Installation Tool for 1/4 in. to 5/8 in. sizes 2.6/1.18

WTC001 Free End Stainless Steel Cable Tie Installation Tool for all sizes 4.4/2.00

WTC075

Designed to install 1/4 in. to 5/8 in. wide Free-End

Clamps. The lightweight, rachet-action tool tension

cuts and secures the buckle tab.

WTJ020

Lightweight pocket-sized toll to install 1/4 in. and

3/8 in. wide Free-End Clamps. This tool also applies

tension and has a built-in cutter.

WTC001

A drop-forged tool with tensioning capability

to do all 1/4 in. to 3/4 in. Free-End Clamp

sizes.

SSH - Heavy Duty Clamp

Stainless Steel Cable Ties and Accessories

•Double-wrapped clamps provide extra strength

•Available in various lengths, widths, and thicknesses

www.tnb.ca

Ty-Rap®

C23

Fastening Products

Cat. No. Width

(in./mm)

Length

(in./mm)

Thickness

(in./mm)

Max. Dia.

Single Wrap

(in./mm)

Max. Dia.

Double Wrap

(in./mm)

Specifications for Stainless Steel Ties

SS7-180

0.18/4.50

6.5/165

0.02/0.51

1.7/43 (single

wrap

only)

SS10-180 10/254 2.8/71

SS16-180 16/406 4.7/119

SS23-180 22.5/572 6/152 –

SS29-180 29.0/737 8/203 –

SS10-250

0.25/6.35

10/254 2.1/153

(single

wrap

only)

SS17-250 16.5/419 4.3/109

SS23-250 22.5/572 6.5/165

SS29-250 29/737 8.5/215

SS35-250 35/889 10.5/265

SSR6-250C

0.25/6.35

6/152 1.5/38 N/A

SSR9-250C 9/229 2.5/63 1.1/28

SSR12-250C 12/305 3.4/86 1.5/38

SSR18-250C 18/457 5.4/137 2.5/64

SSR24-250C 24/610 7.3/185 3.5/89

SSR6-375C

0.38/9.53

6/152 1.5/38 N/A

SSR9-375C 9/229 2.5/63 1.1/28

SSR12-375C 12/305 3.4/86 1.5/38

SSR18-375C 18/457 5.4/137 2.5/64

SSR24-375C 24/610 7.3/185 3.5/89

SSR30-375C 30/762 9.1/231 4.4/112

SSR36-375C 36/914 11.0/280 5.3/135

Uncoated Nylon 11 Coated

TYS6-280 TYS6-280C

0.28/7.00

6/152

0.01/0.25

1.9/48

(single

wrap

only)

TYS9-280 TYS9-280C 9/229 2.8/71

TYS12-280 TYS12-280C 12/305 3.8/96

TYS18-280 TYS18-280C 18/457 5.7/144

TYS24-280 TYS24-280C 24/610 7.6/193

TYS6-470 TYS6-470C

0.47/12.00

6/152 1.9/48

TYS9-470 TYS9-470C 9/229 2.8/71

TYS12-470 TYS12-470C 12/305 3.8/96

TYS18-470 TYS18-470C 18/457 5.7/144

TYS24-470 TYS24-470C 24/610 7.6/193

SSH10-250

0.25/6.35

10/250

0.02/0.51

2.0/50 N/A

SSH16-250 16/400 3.5/88 1.5/38

SSH19-250 19/480 5.0/127 2.5/64

SSH27-250 27/680 70/177 3.5/89

SSH34-250 34/860 9.0/228 4.5/114

SSH16-375 0.38/9.53 16/400

0.03/0.76

3.5/88 1.5/38

SSH44-375 44/1,120 12.0/304 6.0/152

SSH18-500 0.5/12.70 18/460 4.0/101 2.0/5.0

SSH31-500 31/780 8.0/203 4.0/101

SSH21-625

0.63/15.88

21/530 5.0/127 2.5/64

SSH56-625 56/1,420 16.0/406 8.0/203

SSH69-625 69/1,750 20.0/508 10.0/254

SSH24-750

0.75/19.05

24/600 6.0/152 3.0/76

SSH37-750 37/940 10.0/254 5.0/127

SSH50-750 50/1,270 14.0/355 7.0/177

SSH62-750 62/1,570 18.0457 9.0/228

Mini Stainless

Steel Cable Ties

Standard Stainless

Steel Cable Ties

Reusable Stainless

Steel Cable Ties

Multi-Lok Ties — Uncoated

Multi-Lok Ties — Coated

Free-End Clamps

Stainless Steel Cable Ties and Accessories

Speciﬁcations

www.tnb.ca

Ty-Rap®

C24

Fastening Products

Cat. No. Stainless

Steel Type

Coating or

Finish

Min. Loop

Tensile Strength

Single Wrap

(lb./N)

Min. Loop

Tensile Strength

Double Wrap (lb./N)

Application

Tools Used

Max. Dia.

Single Wrap

(in./mm)

Specifications for Stainless Steel Ties (cont’d)

SS7-180

304 Dull to Bright

100/445

(single wrap only)

WTA290

• Wire/cable

bundling

• I.D. tagging

SS10-180

SS16-180

SS23-180

SS29-180

SS10-250

200/890 WTA250

SS17-250

SS23-250

SS29-250

SS35-250

SSR6-250C

200/300

Nylon 11 Coated

(Uncoated or other

colours available on

special order)

75/334 300/1,334 WTAE200 • Reusable

• Cable bundling

• Oil rigs

• Telecommunications

towers

• Hazardous and

corrosive environments

• Cable trays

SSR9-250C

SSR12-250C

SSR18-250C

SSR24-250C

SSR6-375C

100/445 500/2,224

SSR9-375C WTAE201

SSR12-375C

WTC075

SSR18-375C

SSR24-375C

SSR30-375C

SSR36-375C

Uncoated Nylon 11 Coated (cont’d)

TYS6-280 TYS6-280C

316 Uncoated or Nylon

11 Coated Black 250/1,112 (single wrap only)

WTAE200

• Self-locking

• Cable bundling

• Hazardous and

corrosive environments

TYS9-280 TYS9-280C

TYS12-280 TYS12-280C

TYS18-280 TYS18-280C

TYS24-280 TYS24-280C WTAE201

TYS6-470 TYS6-470C

WTC075

TYS9-470 TYS9-470C

TYS12-470 TYS12-470C

TYS18-470 TYS18-470C

TYS24-470 TYS24-470C

SSH10-250

201 Bright

450/2,002 1,200/5,338 WTJ020

WTC075

WTC001

• Industrial hoses

• Cable bundling

• High strength

SSH16-250

SSH19-250

SSH27-250

SSH34-250

SSH16-375 900/4,003 2,400/10,675

SSH44-375

WTC075

WTC001

SSH18-500 1,400/6,227 3,300/14,678

SSH31-500

SSH21-625

1,700/7,562 4,000/17,792SSH56-625

SSH69-625

WTC001

SSH24-750

2,000/8,896 5,000/22,240

SSH37-750

SSH50-750

SSH62-750

Ty-Rap®Stainless Steel Cable Ties have passed a variety of mechanical, environmental, and electrical tests. Other data can be made available upon request.

S.S. Series also available in (316) Stainless.

Speciﬁcations (cont’d)

www.tnb.ca

Ty-Rap®

C25

Fastening Products

Boiler rooms, shipyards, or off-shore oil platforms —

a match for any severe environment!

•Stainless steel strap cable ties have been

designed for high-temperature applications

and for use in areas of harsh, corrosive environments

•Rated at 200-lb. tensile strength

•Smooth edges protect both the cable insulation

and the installer

Cat. No. Body Width

(in.) Length (in.)

Max. Wire

Bundle Dia.

(in.)

Tensile

Strength

(lb.)

Std.

Pkg.

Ty-Rap®Stainless Steel Strap Cable Ties

TYS8 0.310 10.65 2 200 100

TYS14 0.310 14.65 4 200 50

TYS22 0.310 22.65 6 200 50

TYS28 0.310 28.65 8 200 50

Note: Use WT3S Tool for tensioning

Cannot be coated with any covering material

Made of 316 stainless steel

Cat. No. Description Width

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Ty-Rap®Stainless Steel Strapping on a Reel

TYS1000 1,000-ft. of strap, 2 reels of 500 ft. each 0.31/7.87 200/889.60 1

Stainless steel ties of virtually any length can be produced from the 1,000-ft. reel in

combination with the matching head.

Note: Use WT3S tool for tensioning and cutoff

1,000-ft. reel to cut your desired length!

Cat. No. Description Std.

Pkg.

Ty-Rap®Stainless Steel Cable Tie Installation Tools

WT3S Installs strapping ties

DAS250 Installs multi-lok, ball lock, and roller bar lock

stainless steel ties

A perfect mate with cable ties for tensioning

WT3S

DAS250

Cat. No. Description Std.

Pkg.

Ty-Rap®Stainless Steel Strapping Locking Heads

TYS5200H Heads only for stainless strapping 50

Lockable heads for stainless steel strapping

Cat. No. Description Std.

Pkg.

Ty-Rap®Stainless Steel Mounting Base

TCS25 Mounting bases for stainless steel ties 50

Long-lasting anchor hold

Stainless Steel Cable Ties

and Accessories

Tools and Accessories

w w w . t n b . c a

Ty-Rap®

C26

Fastening Products

Identify cable bundles with permanent,

stainless steel imprintable tags

•Apply Type 304 stainless steel tags

with stainless steel cable ties

•Easy-to-use — slip a tie through

the slots in the tag and fasten with

the installaton tool

•Works with 1⁄4 in. wide ties

•0.015 in. Thickness

Cat. No. Width

(in./mm)

Length

(in./mm)

Weight

(lb./N)

Std.

Pkg.

I.D. Tagging System

SSID100 0.75/19.05 2.0/50.80 0.5/2.22

100

SSID101 1.50/38.10 2.5/63.50 1.2/5.34

SSID102 0.75/19.05 3.5/88.90 0.8/3.56

Packaging Quantity: 100/box

Note: Customized pre-embossed tags are available. Please consult Regional Sales

Office for details.

Add suffix (316) for 316 Stainless Steel.

No second guessing — quickly and

accurately position I.D. tags!

•Imprint Thomas & Betts stainless

steel I.D. tags

•Includes special tag holder for

secure positioning and a 3/32 in.

character imprinting wheel,

standard (no substitutions

allowed)

Cat. No. Description Weight

(lb./N)

I.D. Tagging System

WTID200 I.D. Tag Imprinter 29.5/131.2

WTID290 3/32 in. Character Imprinting Wheel

–

WTID281 1/8 in. Character Imprinting Wheel

WTID283 3/16 in. Character Imprinting Wheel

WTID204 (Kit) WTID200 and WTID283

Packaging Quantity: 1/box

Weight

Cat. No. Description lb. kg

S.S. Tape Embossing System

WTID400 Hand-held tool for embossing S.S. I.D. Tap 2.57 1.17

WTID405 Replacement S.S. tape (21’ long. 1/2” wide) 0.18 0.01

Stainless Steel Cable Ties and

Accessories

S.S. Tape Embossing System

www.tnb.ca

Ty-Rap®

C27

Fastening Products

Stainless Steel Cable Ties and Accessories

www.tnb.ca

Ty-Rap®

Cat. No.

Uncoated

302/304 Grade

Stainless Steel

Cat. No.

Uncoated

316 Grade

Stainless Steel

Cat. No.

Fully Coated

316 Grade

Stainless Steel

Length

(in./mm)

Width

(in./mm)

Max. Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

LS-4.6-200A LS-4.6-200B LS-4.6-200C 7.9/201

0.18/4.6

2/51

100/445 100

LS-4.6-360A LS-4.6-360B LS-4.6-360C 14.2/360 4/102

LS-4.6-520A LS-4.6-520B LS-4.6-520C 20.5/520 6/152

LS-4.6-680A LS-4.6-680B LS-4.6-680C 26.7/679 8/203

LS-4.6-840A LS-4.6-840B – 33.0/838 10/254

LS-7.9-200A LS-7.9-200B LS-7.9-200C 7.9/201

0.31/7.9

2/51

250/1,112 50

LS-7.9-360A LS-7.9-360B LS-7.9-360C 14.2/360 4/102

LS-7.9-520A LS-7.9-520B LS-7.9-520C 20.5/520 6/152

LS-7.9-680A LS-7.9-680B LS-7.9-680C 26.7/679 8/203

LS-7.9-840A LS-7.9-840B – 33.0/838 10/254

LS-7.9-1010A LS-7.9-1010B – 41.3/1050 12.5/318

Ordering Information

These one-piece, self-locking stainless steel cable ties offer quick and easy installation —

no crimping or folding required — and a strong, reliable lock. Choose among a variety of

sizes and materials to meet all of your wire and cable bundling needs, even in the most

extreme environments.

Fast, easy installation

•Self-locking — no time-consuming crimping or folding required

•Stainless steel ball in low-profile, wedge-shaped head locks tie securely in place

•Angled tail enables fast, easy insertion

•Rounded edges and smooth surfaces protect installer’s hands

Wide range of sizes

•Six standard lengths cover most applications with custom lengths available

•Two standard widths offer tensile strength of 100 lb. (444.8 N) or 250 lb. (1,112 N)

Three materials suit a variety of environments

•302/304 grade stainless steel for standard applications

•316 grade (marine-grade) stainless steel for extra corrosion resistance

•316 grade (marine-grade) stainless steel, fully coated with low-smoke,

halogen-free polyester to withstand continuous exposure to salt spray, sunlight,

petroleum and chemicals

Engineered to withstand the

harshest environments!

LS-7.9-200-C

LS-4.6-200A

Typical Applications

•Offshore drilling

•Petrochemical processing

•Shipbuilding

•Food and beverage processing

•Pharmaceutical processing

Specifications

•Operating Temp. Range:

Uncoated: -112ºF to 1,000ºF (-80ºC to 538ºC)

Coated: -40ºF to 302ºF (-40ºC to 150ºC)

•Approvals/Standards: UL, CE, Lloyd’s Register,

Germanischer Lloyd, American Bureau of Shipbuilding,

Det Norske Veritas, RoHS compliant

Application Tool

DAS-250 Hand Tool

(adjustable tension,

automatic cut off)

LS - Heavy-Duty Ball-Lock Mechanism

C28

Fastening Products

Advantages of the Deltec™System Include:

•Proven years of service

•No sharp edges — craft friendly Cable friendly!

•Ease of installation — one wrap, no re-treading or re-strap

•Lowers installation costs

•High tensile strength after fastening

•Total flexibility in lengths when using reel

•Stackable spacers accommodate all cable sizes — no need to stock multiple sizes of individual

height spacers

•Spacer designed to retain strap on each side and cradle the cable, providing restricted

movement of spacer and preventing damage to cable

•In situations where multiple cables are supported, the T&B®TCP360 stackable spacer may be

rotated 90° and installed similarly to a single cable, yet provide the same restricting features

(unlike those commonly used today)

•Month and year of manufacture stamped into strap material

•Squirrels and vermin won’t eat it!

Strong, long-life and cost-saving method of securing communication cables

The Deltec™Cable Support System is a user-friendly product designed to provide ease and flexibility

in fastening communications cables to messenger strand. It is equally well suited for copper conductor

cable, coaxial cable, fiber optic cable and innerduct in aerial applications.

The Deltec™system answers your aerial cable needs with innovative design and state-of-the-art

materials. This system includes weather-resistant acetal cable straps, marine grade locking devices,

and base hanger accessories for specific applications where mounting is required.

Pre-assembled Deltec™cable straps are available in standard lengths of 10 in. (254 mm), 13.5 in.

(342.9 mm), and 27 in. (685.8 mm). Convenient 50 ft. (15.24 m) to 3500 ft. (1066.8 m) reels where

specific lengths need to be established by the installer in the field are available. Additional “standard”

lengths can be established for applications where higher volumes prevail.

www.tnb.ca

Ty-Rap®

DELTEC™Cable Support System

Lashing Straps and Accessories

C29

Fastening Products

Specifications

•Strap and Body: Weatherable acetal; offers superior resistance to

sunlight, moisture, and salt environments

•Locking Device: Marine-grade corrosion-resistant silicon copper alloy

•Deltec System Temperature Range: -30ºF to 150ºF; (-34ºC to 66ºC)

•Minimum Tensile Strength: 250 lb. minimum (1,211 N)

•Outdoor Life: Designed to last a minimum of 20 years

•Continuous Load: 20 lb. (9.07 kg)

•Continuous Use Temperature: -85ºF to 194ºF; (-65ºC to 90ºC)

•Colour: Black

Cat. No.

Body

Width

(in./mm)

Max. Wire

Length

(in./mm)

Bundle

Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Stainless Steel Strap Cable Ties

TYD10M

0.5/12.70

10/254.00 3/76.20

240/1,112

TYD510M 51.2/1300.48 16/406.40 50

TYD5135M 13.5/342.90 3.5/88.90 25

TYD5270M 27/685.80 8/203.20 10

DELTEC™Cable Support System

www.tnb.ca

Ty-Rap®

Extra security!

The recommended maximum continuous static loading for the

Deltec™straps is 20 lb. per strap. For best results, suggested

spacing is 15 in. It’s the responsibility of the user to determine

whether or not their application meets our recommendation.

Note: Use WT3D Tool for tensioning and cutoff.

Lashing Straps and Accessories

Cat. No. Description Std.

Pkg.

Modular Stackable Cable Spacers

TCP5255 Modular Stackable Spacer for Deltec™Straps 25

TCP360 For Coaxial Cable 100

One spacer for any cable size!

•Stackable for any desired spacing

•Less inventory — one catalogue

number

•1/2 in. high Made of weather-resistant polypropylene

Colour — Black

Cat. No. Description Std.

Pkg.

Locking Heads

TYD-LH Heads only for Deltec™Strap 25

696-41795 1,000

Heads for Deltec™strap!

Made of weatherable acetal

Colour — Black

C30

Fastening Products

Cat. No. Description Std. Pkg.

Deltec™Base and Hanger

CSS-B Base for Deltec™Strap 50

CSS-H Hanger for Deltec™Strap

Secures cables to all types of

surfaces!

Made of zinc-plated steel

CSS-H

CSS-B

Cat. No. Description Std. Pkg.

Installation/Cutting Tool

WT3D Installs self-locking Ty-Rap®cable ties and

Thomas & Betts lashing ties 25

Install ties easily! Convenient and easy to use!

Cat. No. Description

Tensile

Strength

(lb./N)

Body

Width

(in./mm)

Std.

Pkg.

Deltec™Strap Dispenser on Reels

TYD-50R 50' Reel of Strap

250/1,112 0.50/12.70 1

696-41794 1,000' Reel of Strap

696-41952 3,500' Reel Reel of Strap

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Hook

Material

Tensile

Strength

(lb./N)

Std.

Pkg.

Weather-Resistant Nylon 12 Messenger Hanger Straps (Releasable)

TYM5412X

0.5/12.7

12/304.8 3/76.2

Bronze

200/889.6

TYM5418X 18/457.2 5/127 25

TYM5423X 24/609.6 7/177.8 25

TYM5430X 30/762.0 9/228.6 25

TYM5436X 36/914.4 11/279 25

TYM5412X-S 12/304.8 3/76.2

Stainless

Steel

TYM5418X-S 18/457.2 5/127 25

TYM5423X-S 24/609.6 7/177.8 25

TYM5430X-S 30/762.0 9/228.6 25

TYM5436X-S 36/914.4 11/279 25

Weather-Resistant Nylon 12 Hanger Strap (Releasable)

TY54407X 0.5/12.7 6.36/151.54 2/50.8 Steel 200/889.6 50

TY54413X 13.75/349.25 4/101.6 25

Resistant to UV light,

chemicals, and lower in

moisture absorption

Nylon 12 is a lower, mois-

ture-absorbing material than

6.6 nylon — making the ef-

fect of water on properties

much less.

Weather-Resistant, Nylon 12 Messenger

Hanger Straps (releasable)

The recommended, maximum continuous static loading for the nylon 12 straps is 25 lb. per strap.

For best results, suggested spacing is 15 in. It’s the responsibility of the user to determine whether

or not their application meets our recommendation. Hook will accommodate 1/2 in. dia. messenger

wire. For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).

Colour — Black

DELTEC™Cable Support System

Lashing Straps and Accessories (cont’d)

www.tnb.ca

Ty-Rap®

C31

Fastening Products

Carbon black prolongs the cable tie’s life —

UV protective, too!

Std.

Cat. No.

Bulk

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg

Bulk

Pkg.

Heavy-Duty Lashing Tie (Releasable)

TY5409 TY409 0.5/12.7 19/482.6 4.75/120.65 200/889.6 25 100

Heavy-duty and made of weather-resistant nylon. For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).

Length: 19"

Cat. No.

Body

Width

(in./mm)

Length

(in./mm)

Max. Wire

Bundle Dia.

(in./mm)

Tensile

Strength

(lb./N)

Std.

Pkg.

Weather-Resistant Polypropylene Lashing Tie (Releasable)

TY5418PX

0.5/12.7

18/457.2 5/127

150/667.2

TY5424PX 24/609.6 7/177.8 25

TY5442PX 42/1066.8 12/304.8 10

TY5460PX 60/1524 18/457.2 10

Weather-Resistant Polypropylene Hanger Lashing Tie (Releasable)

TY53418PX 0.5/12.7 18/457.2 5/127 150/667.2 25

An absolute in chemical environments when nylon isn’t

applicable

Chemical exposure directly affects the life of a cable tie making

polypropylene ties an ideal choice. Black is usable for outdoor use,

too.

Made of black weather-resistant polypropylene for outdoor use.

For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).

Cat. No. Description Std.

Pkg.

Messenger Hanger Spacer

TC5254 1 in. long stackable spacer for messenger straps 50

This one-inch long spacer allows you to

separate power and signal cables with a

single-hanger, lashing strap if desired. The

spacer is stackable so that you may

suspend the cable bundle at any desired

distance from the messenger wire in

order to keep the cable runs parallel.

Messenger

wire

Spacer separating

cable bundles

Lashing Straps and Accessories (cont’d)

www.tnb.ca

Ty-Rap®

DELTEC™Cable Support System

C32

Fastening Products

New version available — UL94V-2 rated material

•High-quality Hook & Loop Fasteners designed specifically for

Thomas & Betts

•Enables quick and convenient bundling of data and fiber optic

cables

•Sizes available to accommodate varying bundle diameters

•Screw and adhesive mounting bases provide multiple mounting

options

Cat. No.

Min. Tensile

Strength

(lb./N)

Max.

Bundle Dia.

(in./mm)

Length

(in./mm)

Width

(in./mm)

Std.

Pkg.

*FO Series Loop Ties

FO200-40-0 40/177.9 2.0/50.80 9/228.6 0.50/12.7

FO200-50-0

50/222.4

0.75/19.05

FO350-40-0 3.5/88.90 13/330.2 0.50/12.7

FO350-50-0 0.75/19.05

FOL Series Buckle Ties

FOL300-50-0 50/222.4 3.0/76.20 12/304.8 0.75/19.05 10

FOL500-50-0 5.0/127.00 18/457.2

FOS Series Strip Ties

FOS150-50-0

50/222.4

1.5/38.10 6/152.4

– 10

FOS320-50-0 3.2/81.28 12/304.8

FOS500-50-0 5.0/127.00 18/457.2

FOR Series Rolled Hook and Loop

FOR180-50-0 50/222.4 Various 180/4572 – 1

Black is standard colour.

Multiple colours available for identifying specific bundles

*Add — “FR’’ for UL94V-2 rated material, after colour choice.

Contact your Regional Sales Office for availability and delivery.

FO Series Loop Ties

FOL Series Buckle Ties

FOS Series Strip Ties

FOR Series Rolled Hook

and Loop

Wrap pre-determined

bundle diameters

using the convenient

slotted head!

Polymer buckles

provide added

strength and stability.

Pre-cut lengths make

bundling a cinch!

Rolled hook and loop

material enables

custom cut lengths,

avoiding waste.

Fasteners available in these colours: Black, Brown, Red, Orange,

Yellow, Green, Blue, Grey, and White.

Please consult Regional Sales Office for delivery and availability.

Two mounting bases designed for use

with hook and loop fasteners

Cat. No. Description Screw

Size

Max. Tie

Width

Accom.

Std.

Pkg.

Nylon 6.6 Mounting Bases

TC368 2 in. x 2 in. Screw Mounted #8 0.75/19.05 500

TC368A 2 in. x 2 in. Adhesive Mounted

-40ºF/-40ºC to 176ºF/80ºC

Natural nylon colour.

FO, FOL, FOS and FOR Series

Hook and Loop Fasteners

www.tnb.ca

Ty-Rap®

C33

Fastening Products

Natural

Nylon

Weather

Resistant

Nylon

Heat

Stabilized

Natural 66

Nylon

Flame

Retardant

Nylon

Weatherable

Acetal

Weather

Resistant

Nylon 12

Weather

Resistant

Polypropylene

Radiation

Resistant

Fluoropolymer

Halar®

(2)

Stainless

Steel

Physical Properties of Ty-Rap®Cable Tie Materials

Tensile Strength (Yield)

@ 73ºF (Dry-As-Molded) (1) psi 12,000 12,000 12,000 11,000 10,000 7,500 4,600 6,700 6,600 90,000

Flammability Rating – UL94V-2 UL94V-2 UL94V-2 UL94V-0 UL94HB – – UL94V-0 UL94V-0 –

Radiation Resistance rads 1 x 1051 x 1051 x 1051 x 1051 x 1051 x 1051 x 1052 x 1082 x 1082 x 108

Ultraviolet Light Resistance – Poor Good Poor Poor Very Good Good Good Excellent Excellent Excellent

Water Absorption (24 hrs) % 1.3 1.2 1.4 1.4 0.25 0.25 0.1 <.01 <.01 None

Oxygen Index – 28 28 31 34 21 – – 30 52 –

Max. Continuous Use Temp. F / C 185 / 85 185 / 85 221 / 105 185 / 85 185 / 85 176 / 80 185 / 85 338 / 170 284 / 140 1000 / 537

Min. Continuous Use Temp. F / C -40 / -40 -40 / -40 -40 / -40 -40 / -40 -40 / -40 -40 / -40 -40 / -40 -76 / -60 -50 / -46 -112 /

Colour – Natural Black Green tint White Black Black Black Aqua Maroon Stainless

(1) ASTM D638-878 except stainless steel which is ASTME8

(2) Halar®is a trademark of Solvay Solexis, Inc.

Flammability ratings for selecting Ty-Rap®cable ties

Note: These tests for flammability of plastic material are intended to serve as

a preliminary indication of acceptability with respect to flammability for

particular applications.

UL 94 vertical burn test procedures

Test specimens of the material, with dimensions 5 in. x 1/2 in., with the

thickness intended for use in the end product, are tested in both the

manufactured condition and in the aged state. The test requires that the

specimen be supported in a vertical fixture and a precisely controlled flame

applied for a 10 second period. The flame is removed and the duration of

flaming is noted. If the flame extinguishes, a second exposure to flame for 10

seconds is applied and duration of flaming is again noted. It is observed and

recorded whether or not test specimens drip flaming particles that ignite a

cotton swatch.

Materials classed V-0

A material classed V-0 shall:

A. Not have any specimens that burn with flaming combustion for more

than 10 seconds after either application of the test flame.

B. Not have a total flaming combustion time exceeding 50 seconds for the

10 flame applications for each set of five specimens.

C. Not have any specimens that burn with flaming or glowing combustion

up to the holding fixture.

D. Not have any specimens that drip flaming particles that ignite the dry

absorbent surgical cotton located 12 in. below the test specimen.

E. Not have any specimens with glowing combustion that persists for more

than 30 seconds after the second removal of the test flame.

Materials classed V-1

A material classed V-1 shall:

A. Not have any specimens that burn with flaming combustion for more

than 30 seconds after either application of the test flame.

B. Not have a total flaming combustion time exceeding 250 seconds for the

10 flame applications for each set of five specimens.

C. Not have any specimens that burn with flaming or glowing combustion

up to the holding fixture.

D. Not have any specimens that drip flaming particles that ignite the dry

absorbent surgical cotton located 12 in. below the test specimen.

E. Not have any specimens with glowing combustion that persists for more

than 60 seconds after the second removal of the test flame.

Materials classed V-2

A material classed V-2 shall:

A. Not have any specimens that burn with flaming combustion for more

than 30 seconds after either application of the test flame.

B. Not have a total flaming combustion time exceeding 250 seconds for the

10 flame applications for each set of five specimens.

C. Not have any specimens that burn with flaming or glowing combustion

up to the holding fixture.

D. Be permitted to have specimens that drip flaming particles that burn only

briefly, some of which ignite the dry absorbent surgical cotton placed

12 in. below the test specimen.

E. Not have any specimens with glowing combustion that persists for more

than 60 seconds after the second removal of the test flame.

Material Selection Ordering Guide

Physical Properties of Cable Tie Materials

TABLE 2

www.tnb.ca

Ty-Rap®

C34

Fastening Products

Reagents Concentration

Heat-

Stabilized 6/6

Nylon as Used in

TYH

Series

Halar®† as

Used in TYV

Series

Weatherable

Acetal as

Used in TYD

Series

Standard 6/6

Nylon as

Used in TY

Series

6/6 Weather-

Resistant

Nylon as

Used in TY

Series

6/6 Fire-

Retardant

Nylon as

Used in TY

Series

Weather

Resistant

Nylon as

Used in TYH

Series

Polypropylene

as Used in TYP

Series

Weather

Resistant

Polypropylene

as Used in TYP

Series

Fluoro-

polymer

as Used in

TYZ

Series

Stainless

Steel

as Used in

TYS

Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)

Arsenic Acid 40% – – – – – – – E E – E

Acetaldehyde 50% S – – S S S – – – – –

Acetone 100% E E F E E E E E E E E

Aluminum Hydroxide AQ – E – – – – – E E E E

Ammonia 100% – E – – – – E E E E –

Ammonium Carbonate 5% S E – S S S E E E E E

Ammonium Hydroxide 10% E E F E E E – E E E E

Ammonium Nitrate – – E – – – – E E E E E

Ammonium Sulfate 10% – E – – – – S S S S S

Barium Carbonate 100% – E – – – – E E E E E

Barium Chloride 5% NR – – NR NR NR E E E E E

Barium Sulfate 10% E – – E E E E E E E E

Barium Sulfide 10% S – – S S S E E E E E

Benzene 100% E E F E E E E S S E E

Benzoic Acid 100% NR E – NR NR NR E E E E E

Butyric Acid 50% NR E – NR NR NR – E E E E

Calcium Carbonate AQ – E – – – – – E E E E

Calcium Hydroxide 20% – F E – – – – E E E E

Calcium Hydrochlorite 2% NR – – NR NR NR – F F F F

Calcium Sulfate 2% – E – – – – – E E E E

Carbon Tetrachloride 100% E E E E E E E F F E E

Chlorine (WET) – NR – – NR NR NR – F F F F

Chlorine (DRY) – NR – – NR NR NR – NR NR F F

Chloroacetic Acid 30% NR – – NR NR NR – – – F F

Chloroform 100% – E – – – – F F F E E

Chromic Acid 50% NR S – NR NR NR – F F F F

Citric Acid 50% S E E S S S E E E E E

Copper Cyanide 10% – E – – – – – E E E E

Copper Nitrate 50% – E – – – – – E E E E

Cider – – E – – – – – E E E E

Dichloroethane 100% – E – – – – – – – E E

Diethyl Ether 100% – E S – – – E E E E E

Ethyl Alcohol 100% S E – S S S E E E E E

Table 3 shows the resistance of Ty-Rap®cable

tie materials to various chemicals. The table is

designed to help you determine the cable tie

material best suited for a particular chemical

environment.

†Halar®Trademark of Solvay Solexis, Inc.

Ratings

E= Excellent

S= Satisfactory

F= Fair

NR = Not Recommended

(AQ = Aqueous)

Material Selection Ordering Guide

Chemical Resistance Chart (cont’d)

TABLE 3

www.tnb.ca

Ty-Rap®

C35

Fastening Products

Reagents Concentration

Heat-

Stabilized 6/6

Nylon as Used in

TYH

Series

Halar®† as

Used in TYV

Series

Weatherable

Acetal as

Used in TYD

Series

Standard 6/6

Nylon as

Used in TY

Series

6/6 Weather-

Resistant

Nylon as

Used in TY

Series

6/6 Fire-

Retardant

Nylon as

Used in TY

Series

Weather

Resistant

Nylon as

Used in TYH

Series

Polypropylene

as Used in TYP

Series

Weather

Resistant

Polypropylene

as Used in TYP

Series

Fluoro-

polymer

as Used in

TYZ

Series

Stainless

Steel

as Used in

TYS

Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)

Ethyl Chloride 100% – S E – – – F F F E E

Ethylene Glycol 100% E E S E E E – E E E E

Ferric Hydroxide 100% – E – – – – – E E E E

Ferric Nitrate 10% – E – – – – – E E E E

Ferrous Sulfate 10% – E – – – – – E E E E

Fuel Oil 100% – E – – – – E – – E E

Furfural 100% – E – – – – – F F E E

Gallic Acid AQ – E – – – – – – – E E

Gasoline 100% E E – E E E – S S E E

Glycerine 100% – E – – – – E E E – E

Hydrocyanic Acid 100% – E – – – – – E E E E

Hydrogen Peroxide 30% NR E F NR NR NR S E E E E

Hydrogen Sulfide Dry NR E – NR NR NR E E E E E

Iodoform 100% – E – – – – – – – E E

Isopropyl Alohol 100% S E – S S S E E E E E

Jet Fuel 100% E E – E E E – S S E E

Lactic Acid 10% E E – E E E S E E E E

Lanolin 10% E E – E E E E E E E E

Lead Acetate 5% – E – – – – – E E E E

Linseed Oil 10% E E E E E E E E E E E

Magnesium Carbonate 100% – E – – – – E E E E E

Magnesium Chloride 10% F – – F F F F F F F F

Magnesium Nitrate 100% – E – – – – E E E E E

Malic Acid AQ – E – – – – – E E E E

Mercury 100% – E – – – – E E E E E

Methyl Alcohol 100% S E – S S S E E E E E

Methyl Chloride 100% – S – – – – – S S E E

Methyl Ethyl Ketone 100% – E F – – – E E E E E

Naptha 100% – E – – – – – E E E E

Nitric Acid 30% NR E NR NR NR NR – E E E E

Nitric Acid 30%-70% NR S NR NR NR NR – F F S E

Nitrous Acid 5% – E – – – – – F F E E

Oieic Acid 100% – E S – – – – E E E E

Oxalic Acid 10% – E – – – – S E E E E

Paraffin 100% E E – E E E E E E E E

Petroleum Ether 100% – E – – – – E F F E E

Phenol 90% NR E NR NR NR NR – E E E E

Phosphoric Acid 10% NR E – NR NR NR – E E E E

Picric Acid 1% – E – – – – – E E E E

Potassium Bromide AQ – – – – – – – S S S S

†Halar®Trademark of Solvay Solexis, Inc.

Ratings

E= Excellent

S= Satisfactory

F= Fair

NR = Not Recommended

(AQ = Aqueous)

Material Selection Ordering Guide

Chemical Resistance Chart (cont’d)

TABLE 3 (con’t)

www.tnb.ca

Ty-Rap®

C36

Fastening Products

Reagents Concentration

Heat-

Stabilized 6/6

Nylon as Used in

TYH

Series

Halar®† as

Used in TYV

Series

Weatherable

Acetal as

Used in TYD

Series

Standard 6/6

Nylon as

Used in TY

Series

6/6 Weather-

Resistant

Nylon as

Used in TY

Series

6/6 Fire-

Retardant

Nylon as

Used in TY

Series

Weather

Resistant

Nylon as

Used in TYH

Series

Polypropylene

as Used in TYP

Series

Weather

Resistant

Polypropylene

as Used in TYP

Series

Fluoro-

polymer

as Used in

TYZ

Series

Stainless

Steel

as Used in

TYS

Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)

Potassium Carbonate – E – – – – – E E E E –

Potassium Chlorate AQ – E – – – – S E E E E

Potassium Dichromate 40% NR E – NR NR NR F E E E E

Potassium Ferrocyanide 25% – E – – – – – E E E E

Potassium Hydroxide 5% S E – S S S – E E E E

Potassium Iodide 100% – E – – – – E E E E E

Potassium Nitrate 50% F E – F F F E E E E E

Potassium Permanganate 5% NR E S NR NR NR NR E E E E

Potassium Sulfate 5% – E – – – – E E E E E

Potassium Sulfide AQ – E – – – – – E E E E

Propyl Alcohol 100% E E – E E E – E E E E

Silver Nitrate 10% – E – – – – E E E E E

Sodium Acetate 60% E E – E E E – E E E E

Sodium Bicarbonate 100% E E – E E E E E E E E

Sodium Bisulfate 10% – E E – – – E E E E E

Sodium Borate 100% – E – – – – – E E E E

Sodium Carbonate 5% E E S E E E E E E E E

Sodium Chlorate 25% – E E – – – S E E E E

Sodium Chloride 2% E E S E E E E E E E E

Sodium Fluoride 5% – – – – – – – F F F F

Sodium Hydroxide 10% E E S E E E E E E E E

Sodium Hyposulfite AQ – E – – – – – – – E E

Sodium Nitrate 5% E E – E E E E E E E E

Sodium Nitrite AQ – E – – – – S E E E E

Sodium Perchlorate 10% – E – – – – – – – E E

Sodium Phosphate 5% – E – – – – E E E E E

Sodium Sulfate 5% S E – S E E E E E E E

Sodium Thiosulfate 5% – – S – – – S S S S S

Stearic Acid 100% – E – – – – F E E E E

Sulfur 100% – E – – – – E E E E E

Sulfur Dioxide 100% NR E – NR NR NR E E E E E

Sulfuric Acid Conc. NR E NR NR NR NR – S S E E

Sulfuric Acid 5% NR F F NR NR NR F F F F F

Tannic Acid 10% – E – – – – – E E E E

Tartaric Acid 50% – E E – – – E E E E E

Tetrahydrofuran 100% – F E – – – S F F E E

Toluene 100% E E F E E E E F F E E

Xylene 100% E – – E E E E F F E E

Zinc Chloride 70% F E NR F F F E E E E E

Zinc Nitrate AQ – E – – – – E E E E E

Zinc Sulfate AQ – E – – – – E E E E E

†Halar®Trademark of Solvay Solexis, Inc.

Ratings

E= Excellent

S= Satisfactory

F= Fair

NR = Not Recommended

(AQ = Aqueous)

TABLE 3 (con’t)

Material Selection Ordering Guide

Chemical Resistance Chart (cont’d)

www.tnb.ca

Ty-Rap®

C37

Catamount ®Fastening Products

Catamount®Cable Ties are available in lengths from 4 in. to our

exclusive 48 in. strap. Cable Ties will satisfy bundling requirements from

1/16 in. to 15 in. and loop tensile strengths from 18 to 175 pounds.

Cable Ties are stocked in materials and colours as listed. Contact your

Regional Sales Office for availability in special colours.

Where applicable, Catamount®Cable Ties are UL Recognized, Mil-Spec

Approved and/or QPL Listed.

State-of-the-art robotic and raw material handling equipment assures

product and material integrity throughout the manufacturing process.

Overall quality is achieved through statistical analysis and quality driven

operator objectives.

Catamount®has attained Mil-Spec I-45208 quality ratings from a number

of equipment manufacturers.

Catamount®products are sold through stocking T&B®Distributors.

Mil-Spec (Page C43)

Miniature (Page C40) Intermediate (Page C40)

Standard (Page C40)

Heavy-Duty (Page C40)

Extra Heavy-Duty (Page C40)

Mounting Head (Page C41)

Releasable (Page C41)

I.D. Ties (Page C42)

Push Mount (Page C41)

Strict Tolerances

Assure Locking

Strength

Recessed

Entry to

Guide

Insertion

Generous Radii on All

Angles to

Reduce Friction

Raised Grips on

Tail to Assist

Operators

Gradual Strap to Tail

Transition for Lower

Insertion Force

Reinforced Head and

Strap Transition for

Added Strength

Highly Engineered Tooth

and Pawl Design for

Maximum Engagement

Bent Tip Design for

Easier Assembly

•Miniature

•Heavy Duty

•Intermediate

•Extra Heavy Duty

•Standard

•Releasable Ties

•Mounted Head

•Striped Ties

•Restricted Bundle

•Identification Ties

•Mil-Spec Ties

Striped (Page C44)

Cable Ties

www.tnb.ca

C38

Catamount ®Fastening Products

L 4 18 HS – 9 M

Quantity

Q - 25 pack

L- 50 pack

C- 100 pack

D- 500 pack

M- 1,000 pack

Colour

See Colour

Table

Tensile Strength

18 lb.

30 lb.

40 lb.

50 lb.

120 lb.

175 lb.

250 lb.

Length

Product Prefix

P - Plain Bagged Cable Ties

L- Cable Ties

MP NY - 750 - 9 C

Quantity

Q - 25 pack

L- 50 pack

C- 100 pack

D- 500 pack

M- 1,000 pack

Colour

See Colour

Table

Size / #

.75"

Material

Nylon

TZ - Fluoropolymer

PV - PVC

PE - Polyethylene

FR - Flame Retardant

TL - Teflon

Product Prefix

MP - Mounting Pad

ID - Identification

S# - Strapping Thickness

MC - Mounting Cradle

PM - Push Mounts

SM - Screw Mounts

N# - Plain-Edged Cable Clamps / Width

W# - Self-Aligning Cable Clamps / Dia.

UL - Adjustable Cable Clamps

GG - Gator Grip

FA - Flat Adhesive Clip

FS - Flat Screw Clip

FR - Flat Rubber Adhesive Clip

MS - Snap Mount

RA - Round Adhesive Clip

SR - Spiral Wrap

GS - Grommeting

GR - Extruded Grommeting

GRU - Extruded Grommeting Uncut

Colour Table

0 – Black

(Weather-Resistant)

1 – Brown

2 – Red

3 – Orange

4 – Yellow

5 – Green

6 – Blue

7 – Purple

8 – Grey

9 – Natural

11 – Fluorescent Pink

16 – Fluorescent Orange

17 – Fluorescent Yellow

18 – Fluorescent Green

20 – Fluorescent Blue

Type of Product

Nylon 66 - Leave Blank

Heat Stabilized - HS

(Black and Natural Colour Only)

Fluorescent - FL

Mounting Head - MH

Pushmount - PM

Pushmount Releasable - PMR

Releasable - R

Restricted Bundle - TB

Identification - ID

Catalogue Number Construction

Cable Ties

www.tnb.ca

C39

Catamount ®Fastening Products

Property

ASTM

Method Test Condition Units

Molded 6/6

Nylon

Heat

Stabilized

Nylon UV Black Nylon

Materials for Molded Assembly Hardware

Tensile Strength D638 +73°F; 50% RH kpsi 11.2 11.2 9.0

Elongation at Break D638 +73°F; 50% RH % Z300 Z300 200

Yield Strength D638 +73°F; 50% RH kpsi 8.5 8.5 9.0

Shear Strength D732 Dry As Molded (DAM) kpsi 9.6 9.6 10.5

Deformation Under Load D621 2,000 psi

+122°F; DAM % 1.4 1.4 1.2

IZOD Impact D256 +73°F; 50% RH ft. lb./in. 2.1 2.1 2.0

Tensile Impact Strength D1822 +73°F; Long

Specimen; DAM ft. lb./in.2240 240 N.R.

Melting Point D789 Fisher-Johns °F 491 491 491

Thermal Linear Expansion D696 DAM in./in./°F 4 x 10-5 4 x 10-5 N.R.

Thermal Conductivity – DAM Conche-Fitch BTU - in/h . ft2. °F 1.7 1.7 1.7

Brittleness Temperature D746 50% RH °F -85 -85 -62

Oxygen Index D2863 DAM

50% RH %02

UL Flammability UL 94 DAM

50% RH

–

V-2

•Material data as provided by our suppliers

•N.R. = Not Reported

•Tests conducted on 1/4 in. specimens

About Nylon…

Nylons possess an outstanding balance of properties combining strength, moderate stiffness, high service temperature and a high level of toughness. Nylon is

particularly resistant to repeated impact, has a low co-efficient of friction and excellent abrasion resistance.

Nylon is resistant to fuels, lubricants and most chemicals, but is attacked by phenols, strong acids and oxidizing agents. Contact your Regional Sales Office for

chemical data relative to your application.

Nylon is inherently susceptible to environ mental conditions. Catamount®Cable Ties are moisturized to optimum performance levels at machine-side and

should be stored in cool dry areas out of direct sunlight. Cable Ties are packaged in plastic bags to contain moisture and should remain sealed until ready

for use.

Sample

Thickness

(in.)

Flammability

Energy

Source

Specific Optical Density

at Maximum

Smoke Accumulationat 2 Minutes

NBS Smoke Generation for 6/6 Nylon

1/16 94 V-2 Radiant

(2.5 watts/sq cm) 13 0

1/8 94 V-2 Radiant Plus

Flaming Gas Jets 26 1

Results as provided by National Bureau of Standards (NBS). Results may not be

directly correlated with larger fires, such as burning buildings. Materials should be

tested to your application.

MaterialMinimum

Thickness (in.)

Temperature IndexHot Wire

Ignition (sec)

Electrical (°C)Mechanical

w/o Impact (°C)

Temperature Index for Molded Nylons

6/6 Nylon

UV Black

Nylon

0.580

0.120

0.240

1.25

15.0

35.0

Heat

Stabilized Nylon

0.580

0.120

1.30

105

110

11.0

20.0

Temperature Index is the temperature at which the specific property will decrease to

one-half its original value after 60,000 hours exposure at that temperature.

Cable Ties

www.tnb.ca

C40

Fastening Products

Catamount®Ties and Terminals fit the needs of general-purpose fastening and wire terminations. Installers quickly discover that Catamount®products offer durable and value-

priced cable bundling for a variety of commercial and residential construction applications. Electricians can also take advantage of other benefits in stocking Catamount®products

in their toolboxes, such as more terminals per bag in most popular sizes than leading comparable brands.

Catamount®Ties and Terminals are offered in a wide range of sizes, styles and colours and meet listing requirements for most electrical termination and fastening projects. A

choice of matching tools are also offered to provide quick and reliable installations.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Miniature — Series 18

L-4-18-9-C 4.0 5/8 Natural

100

L-4-18-0-C Black

L-6-18-9-C 6.4 1-1/2 Natural

L-6-18-0-C Black

L-8-18-9-C 8.0 2 Natural

L-8-18-0-C Black

Bulk packages available. Contact your Regional Sales Office.

Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Intermediate — Series 30

L-5-30-9-C 5.6 1-1/4 Natural

100

L-5-30-0-C Black

L-8-40-9-C 8.5 2 Natural

L-8-40-0-C Black

L-11-40-9-C 11.5 3 Natural

L-11-40-0-C Black

L-14-40-9-C 14.5 4 Natural

L-14-40-0-C Black

Bulk packages available. Contact your Regional Sales Office.

Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Standard — Series 50

L-5-50-9-C 5.5 1 Natural

100

L-5-50-0-C Black

L-7-50-9-C 7.5 1-3/4 Natural

L-7-50-0-C Black

L-11-50-9-C 11.1 3 Natural

L-11-50-0-C Black

L-14-50-9-C 14.1 4 Natural

L-14-50-0-C Black

Bulk packages available. Contact your Regional Sales Office.

Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Heavy-Duty — Series 120

L-8-120-9-C 8.0 2 Natural

100

L-8-120-0-C Black

L-11-120-9-C 11.1 3 Natural

L-11-120-0-C Black

L-14-120-9-C 14.2 4 Natural

L-14-120-0-C Black

L-18-120-9-L 18.0 4-7/8 Natural

L-18-120-0-L Black

L-24-120-9-L 24.2 7 Natural

L-24-120-0-L Black

L-28-120-9-L 28.0 8 Natural

L-28-120-0-L Black

Use L-300C or ERG-120 Installation Tools.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Extra Heavy-Duty — Series 175

L-24-175-9-L 24.00 7.2 Natural

L-24-175-0-L Black

L-34-175-9-L 34.0 10 Natural

L-36-175-9-L 36.0 10-3/4 Natural

L-36-175-0-L Black

L-41-175-9-L 41.0 12 Natural

L-41-175-0-L Black

L-48-175-9-L 48.0 15 Natural

L-48-175-0-L Black

Use L-300C or ERG-120 Installation Tools.

Sample Catalogue Order:

L 4 18 9 C

4 in. Length, 18 lb. Tensile

Strength, Natural Colour,

100-Pack Quantity

Length

Tensile Strength Quantity

Colour

Colour Table

0 – Black (UV Resistant) 5 – Green 11 – Fluorescent Pink

1 – Brown 6 – Blue 16 – Fluorescent Orange

2 – Red 7 – Purple 17 – Fluorescent Yellow

3 – Orange 8 – Grey 18 – Fluorescent Green

4 – Yellow 9 – Natural 20 – Fluorescent Blue

Cable Ties

www.tnb.ca

Catamount ®

C41

Fastening Products

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Releasable Ties

L-5-50R-9-C 5.90 1-1/4 Natural

100

L-5-50R-0-C Black

L-8-50R-9-C 7.80 2 Natural

L-8-50R-0-C Black

L-10-50R-9-C 11.27 3 Natural

L-10-50R-0-C Black

Bulk packages available.

Contact your Regional Sales Office.

Push button release. Cat. No. Length

(in.)

Mounting

Hole

Max. Panel

Thickness

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Push Mount Cable Ties

L-5-50PM-9-C 5.80

0.250 0.105

1Natural

100

L-5-50PM-0-C Black

L-7-50PM-9-C 8.20 1-3/4 Natural

L-7-50PM-0-C Black

Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200 or L-400-C

Installation Tools.

Black shown.

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Width

(in.)

Min.

Loop

Tensile

Mounting

Head

Screw Size

Colour Std.

Pkg.

Mounting Head Ties

L-5-30MH-9-C 5.85 1-1/4 0.140

No. 8 Natural

100

L-5-30MH-0-C Black

L-7-50MH-9-C 7.50 1-3/4 0.185

No. 10

Natural

L-7-50MH-0-C Black

L-11-50MH-9-C 11.10 3

0.187 50

Natural

L-11-50MH-0-C Black

L-14-50MH-9-C 14.50

Natural

L-14-50MH-0-C Black

L-14-120MH-9-C 14.85 0.300 120 1/4 in. Natural

L-14-120MH-0-C Black

Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200, L-400-C, ERG-120 or

ERG-50 Installation Tools.

Cat. No. Length

(in.)

Mounting

Hole

Max. Panel

Thickness

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Releasable Push Mount Cable Ties

L-5-50PMR-9-C 5.80

0.250 0.105

1Natural

100

L-5-50PMR-0-C Black

L-7-50PMR-9-C 8.20 1-3/4 Natural

L-7-50PMR-0-C Black

Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200 ou L-400-C

Installation Tools.

Cable Ties

www.tnb.ca

Catamount ®

C42

Fastening Products

Cat. No. Length

(in.)

Max.

Bundle Dia.

(in.)

Colour Std.

Pkg.

Identification Ties

L-7-50ID-9-C 7.875 1-3/4 Natural 100

L-4-18ID-9-C 4.0 3/4 Natural

Bulk packages available. Contac your Regional Sales Office.

Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No. Width

(in.)

Height

(in.)

Slot

Height

(in.)

Slot

Width

(in.)

Colour Std.

Pkg.

Identification Tags

IDNY-1500-9-M 1.5 0.745 0.090 0.200 Natural 100

IDNY-2000-9-M 2.0 0.113 0.336 Natural

Cat. No. Mount Method Colour

Cable Tie Mounting Bases

3/4 in. Class

MPNY-750-9-C Synthetic Rubber Adhesive Natural

MPNY-750-0-C Synthetic Rubber Adhesive Black

MPNY-750A-9-C Acrylic Adhesive Natural

MPNY-750A-0-C Acrylic Adhesive Black

MPNY-750S-9-C #6 Screw Natural

MPNY-750S-0-C #6 Screw Black

1 in. Class

MPNY-1000-9-C Synthetic Rubber Adhesive Natural Nylon

MPNY-1000-0-C Synthetic Rubber Adhesive Black Nylon

MPNY-1000A-9-C Acrylic Adhesive Natural Nylon

MPNY-1000A-0-C Acrylic Adhesive Black Nylon

MPNY-1000S-9-C #6 Screw Natural Nylon

MPNY-1000S-0-C #6 Screw Black Nylon

For use with 18–50 lb. Cable Ties.

•Mounting Surface should be cleaned with alcohol based (IPA)

cleaner before application

•Acrylic Based may be repositioned initially. Allow 24–72 hours

setup for maximum performance with Acrylic Based adhesives

•For Rubber Based, allow 15 minutes setup for maximum performance

•3⁄4 in. and 1-1/8 in. mounts for use with 18# through 50# tensile cable ties

•Supplied on rubber-based or acrylic closed cell foam adhesive or with no adhesive for

#6 screw mount applications

•Available in 6.6 Natural Nylon and 6.6 Black Nylon

•UL Flammability 94 V-2 (clip)

Cable Ties

www.tnb.ca

Catamount ®

C43

Fastening Products

The following cable ties meet the stringent requirements of military specifications. To locate ties that meet a

particular specification, refer to the chart below.

MINIATURE

INTERMEDIATE

STANDARD

HEAVY DUTY Use L-300C Tool

Cat. No. Mil-Spec Material ID

Code

Tool

Setting

Std.

Pkg.

Bulk

Pkg.

Mil-Spec Cable Ties

L-14-50-9-C L-14-50-9-D MS-3367-2-9 Natural Nylon STD 6 to 8 100 500

L-14-50-0-C L-14-50-0-D MS-3367-2-0 UV Black Nylon STD 6 to 8 100 500

L-14-120-9-C –MS-3367-3-9 Natural Nylon HVY 5 to 8 100 –

L-14-120-0-C –MS-3367-3-0 UV Black Nylon STD 6 to 8 100 –

L-4-18-9-C –MS-3367-4-9 Natural Nylon MIN 1 to 3 100 –

L-4-18-0-C –MS-3367-4-0 UV Black Nylon MIN 1 to 3 100 –

L-5-30-9-C –MS-3367-5-9 Natural Nylon INT 3 to 5 100 –

L-5-30-0-C –MS-3367-5-0 UV Black Nylon INT 3 to 5 100 –

L-11-50-9-C L-11-50-9-D MS-3367-7-9 Natural Nylon STD 6 to 8 100 500

L-11-50-0-C L-11-50-0-D MS-3367-7-0 UV Black Nylon STD 6 to 8 100 500

L-28-120-9-L –MS-3367-6-9 Natural Nylon HVY 5 to 8 50 –

L-28-120-0-L –MS-3367-6-0 UV Black Nylon HVY 5 to 8 50 –

To assure that military labeling

requirements are met when

ordering MIL-SPEC Cable Ties,

please reference the desired MS

number when ordering.

Colour Table

0 – Black (Outdoor)

1 – Brown

2 – Red

3 – Orange

4 – Yellow

5 – Green

6 – Blue

7 – Purple

8 – Grey

9 – Natural

11 – Fluorescent Pink

16 – Fluorescent Orange

17 – Fluorescent Yellow

18 – Fluorescent Green

20 – Fluorescent Blue

Sample Catalogue Order:

L 4 18 9C= Natural Colour Type

•Use L-200, L-400-C or ERG-297

Installation Tools

•Catamount®FSCM 54664 QPL Listed

Catamount®Military Speciﬁcation Ties

Cable Ties

www.tnb.ca

Catamount ®

C44

Fastening Products

Cat. No. Tie

Colour

Stripe

Colour

Diameter Length Width Loop Tensile Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) lb kg

Striped Ties

L-4-18-1/10-L

Brown

White

1/16 - 7/8 2 - 16 4.0 102 0.100 3 18 8.2 50

L-4-18-1/2-L Red

L-4-18-1/0-L Black

L-4-18-1/4-L Yellow

L-4-18-1/7-L Purple

L-4-18-3/10-L

Orange

White

L-4-18-3/2-L Red

L-4-18-3/0-L Black

L-4-18-3/4-L Yellow

L-4-18-3/7-L Purple

L-4-18-5/10-L

Green

White

L-4-18-5/2-L Red

L-4-18-5/0-L Black

L-4-18-5/4-L Yellow

L-4-18-5/7-L Purple

L-4-18-6/10-L

Blue

White

L-4-18-6/2-L Red

L-4-18-6/0-L Black

L-4-18-6/4-L Yellow

L-4-18-6/7-L Purple

L-4-18-8/10-L

Grey

White

L-4-18-8/2-L Red

L-4-18-8/0-L Black

L-4-18-8/4-L Yellow

L-4-18-8/7-L Purple

Also available in bulk packages of 1,000.

Use QC-100, L-200, L-400-C, or ERG-299 Installation Tools.

Consult your Regional Sales Office for availability and colours.

•Striped ties are used to identify wire bundles promarily

for P.I.C. and station cable binder marking

•Telecom applications

Cable Ties

www.tnb.ca

Catamount ®

C45

T&B ®Fastening Products

Designed with OEMs in mind, this new series of competitively priced T&B®cable ties holds

down costs and speeds up cable fastening. Our all-nylon design lowers installation costs

and provides features to ease fastening for harness fabrication and wire bundling in the manufacturing

environment.

T&B®cable ties are made of nylon 6/6 and perform well in most applications in temperatures ranging from

185°F to -40°F. The smooth edges are designed to prevent damage to wire insulation, reducing the

opportunity for shorting, and tails are “turned up” for fast assembly. T&B®cable ties come in natural or

outdoor weatherable black, and custom colours and options are available.

T&B®cable ties may be fastened with standard Thomas & Betts tying tools. All your favorite Ty-Rap®

mounting bases and accessories may be used with T&B®cable ties. For harsh industrial environments, use

our “grip of steel®” Ty-Rap®cable ties with the unique stainless steel barb. Ty-Rap®and T&B®cable ties

combine to offer the most complete package of cable ties and accessories for the fastening market.

T&B®cable ties come in large poly bags for convenient inventory and easy access at the manufacturing

site. Call your local Thomas & Betts distributor today and find out how well T&B®cable ties can fit your

needs, from one end to the other.

•The integrally formed nylon pawl combines

low insertion and high locking strength

•A rounded, low-profile head makes for less

snags

•Tails have an improved two-sided finger

grip design that helps the operator grasp

and pull ties snug

•“Sure Grip” tab keeps the tail from popping

out while being threaded, then holds it

securely for final tightening by hand or tool

•Quick, easy pull through increases

productivity, reduces operator fatigue

Cat. No.

Min. Tensile

Strength

(in./lb)

Military

Standard

Part No.

Tie

Length

(in.)

Max. Bundle

Diameter

(in.)

Width

(in.)

Std.

Pkg.

(pieces)

T&B®Cable Ties

TY075-18 18 MS3367-4 3.60 0.75 0.095 1,000

TY125-18 18 – 5.34 1.25 0.095 1,000

TY125-40 40 MS3367-5 5.60 1.25 0.140 1,000

TY200-18 18 – 7.75 2.00 0.095 1,000

TY200-40 40 – 8.00 2.00 0.140 1,000

TY200-120 120 – 8.63 2.00 0.299 500

TY300-40 40 – 11.40 3.00 0.140 1,000

TY175-50 50 MS3367-1 7.30 1.75 0.184 1,000

TY300-50 50 MS3367-7 11.40 3.00 0.184 1,000

TY400-50 50 MS3367-2 14.30 4.00 0.184 1,000

TY400-120 120 MS3367-3 14.30 4.00 0.301 500

Add suffix (-20) for cosmetic black, non-weatherable material.

Cat. No.

Min. Tensile

Strength

(in./lb)

Military

Standard

Part No.

Tie

Length

(in.)

Max. Bundle

Diameter

(in.)

Width

(in.)

Std.

Pkg.

(pieces)

Outdoor Weatherable (black)

TY075-18X 18 – 3.60 0.75 0.095 1,000

TY125-18X 18 – 5.34 1.25 0.095 1,000

TY125-40X 40 – 5.60 1.25 0.140 1,000

TY200-18X 18 – 7.75 2.00 0.095 1,000

TY200-40X 40 – 8.00 2.00 0.140 1,000

TY200-120X 120 – 8.63 2.00 0.299 500

TY300-40X 40 – 11.40 3.00 0.140 1,000

TY175-50X 50 – 7.30 1.75 0.184 1,000

TY300-50X 50 – 11.40 3.00 0.184 1,000

TY400-50X 50 – 14.30 4.00 0.184 1,000

TY400-120X 120 – 14.30 4.00 0.301 500

From one end to the other,

T&B®Cable Ties ﬁt the

needs of OEMs

Cable Ties

www.tnb.ca

C46

T&B ®Fastening Products

•Extruded in 5 widths with 8 mounting hole diameters

for use with a variety of standard and custom

fasteners

•Extrusion grade Black Nylon

•Hole spacing allows for greater flexibility in meeting

bundle diameter requirements

•Strapping provides a wide range of tensile strengths

depending on mounting method

(S2NY-096-0 tested at 50 lb. with BTNY-096)

•Non-Conductive, Non Corrosive; resistant to fuels,

lubricants and most chemicals

Cat. No.

Width - W Thickness - T Hole - H Spacing - E

Quantity

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Strapping

S2NY-096-0-C 0.281 7.13 0.32 0.813 0.096 2.44 0.187 4.75

100 foot rolls

S4NY-128-0-C

0.375 9.52 0.40 1.02

0.128 3.25 0.312 7.92

S4NY-140-0-C 0.140 3.56 0.312 7.92

S4NY-167-0-C 0.167 4.24 0.312 7.92

S4NY-167X-0-C 0.167 4.24 0.218 5.54

S6NY-000-0-C

0.500 12.70 0.60 1.52

N/A N/A N/A N/A

S6NY-167-0-C 0.167 4.24 0.390 9.90

S6NY-203-0-C 0.203 5.16 0.390 9.90

S6NY-203X-0-C 0.203 5.16 0.281 7.14

S7NY-265-0-C

0.625 15.87

0.70 1.78

0.265 6.73 0.500 12.70

S7NY-265X-0-C 0.265 6.73 0.375 9.52

S7NY-281-0-C 0.281 7.14 0.500 12.70

S9NY-000-0-C

0.875 22.22

N/A N/A N/A N/A

S9NY-203-0-C 0.203 5.16 0.500 12.70

S9NY-265-0-C 0.265 6.73 0.500 12.70

S9NY-390-0-C 0.390 9.90 0.625 15.87

Cat. No. Strap-Tite

Buckle

Mounting

Tab

Mounting

Cradle

Stud

Buttons

Machine

Screw

Strapping Accessories Reference

S2NY-096-0-C

N/A

M4NY-203-0-D C4NY-203-0-D

BTNY-096-0-D #2

S4NY-128-0-C #5

S4NY-140-0-C #6

S4NY-167-0-C B4NY-167-0-D BTNY-167-0-D #8

S4NY-167X-0-C #8

S6NY-000-0-C N/A

M6NY-265-0-D

N/A

N/A N/A

S6NY-167-0-C #8

S6NY-203-0-C B6NY-203-0-D BTNY-203-0-D #10

S6NY-203X-0-C #10

S7NY-265-0-C B7NY-265-0-D M7NY-328-0-D BTNY-265-0-D 1/4

S7NY-265X-0-C 1/4

S7NY-281-0-C

N/A

N/A 1/4

S9NY-203-0-C

N/A

BTNY-203-0-D #10

S9NY-265-0-C BTNY-265-0-D 1/4

S9NY-390-0-C N/A 3/8

Cable Ties

www.tnb.ca

C47

T&B ®Fastening Products

Advantages

•Manufactured of natural colour nylon 6/6 material

•Temperature range of -40°F to 185°F

•UL 94 V-2 flammability rating

•Halogen and silicone-free to meet your application needs

•The integrally formed pawl combines low insertion and high

locking strength

•A rounded, low profile head makes for less snags

•Tails have improved two sided finger grip design that helps the

operator grasp and pull ties snug

•Quick and easy pull through increases productivity, reduces

operator fatigue

One Tie, Two Loops

Double Loop Cable Ties allow the parallel routing of two bundles of cable

with one single cable tie. The unique design loops itself twice through the head of the tie

in separate latching pawls. Applications include appliance manufacturers, automotive,

aerospace, data communications, and electrical equipment manufacturers.

Cat. No.

Length Width Bundle Diameter Range Tensile

Strength

(lb./N.)

Installation

Tooling for

all sizes

Std.

Pkg.

(in.) (mm) (in.) (mm) Loop 1 (in./mm) Loop 2 (in./mm)

Double Loop Cable Ties

TB-50RLDH 7.8 198.12

0.19 4.83

0.1 - 1.8 / 2.54 - 45.72 0.1 - 1.7 / 2.54 - 43.18

50/222.4 ERG50 1,000TB-12-50RLDH 11.8 299.72 0.1 - 2.8 / 2.54 - 71.12 0.1 - 2.7 / 2.54 - 68.58

TB-15-50RLDH 14.6 370.84 0.1 - 3.9 / 2.54 - 99.06 0.1 - 3.8 / 2.54 - 96.52

Cable Ties

Double Loop Cable Ties

www.tnb.ca

C48

Fastening Products

Features

•Low-profile, contoured head reduces clearance required for the bundle and enhances the

appearance of your harness

•The safe-guard wall eliminates exposure to sharp edges

•The saddle back fits snug against the contour of the wiring harness

•Sizes and colours available to accommodate varying requirements

•High-quality nylon strength

This fastener design from Thomas & Betts is ideal for use where precision bundling is required

and clearance is a necessity. A unique saddle back design curves to form a snug fit around the

bundle, and allows for easy pull-through in bulkheads and any other tight spaces. Our

contoured head eliminates snagging and sharp edges are reduced by our safe-guard walls.

Low profile contoured head compared with the profile of the

traditional T&B®Cable Tie.

Cat. No.

Bundle Range Dia. Tie Length Strap Width Strap Thick Tensile Strength Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) lb. kg

Cable Ties Ordering Information

SF100-18 0.125 - 1.00 3.17 - 25.4 4.65 118.11

0.95 2.41 0.043 1.09 18 8.16

100 1,000

SF150-18 0.125 - 1.50 3.17 - 38.1 6.45 163.83

SF200-18 0.125 - 2.00 3.17 - 50.8 8.10 205.74

SF175-50 0.187 - 1.75 4.74 - 44.4 7.70 195.58

0.187 4.74

0.48 1.21

50 22.68SF300-50 0.187 - 3.00 4.74 - 76.2 11.33 287.78 0.52 1.32

SF400-50 0.187 - 4.00 4.74 - 101.6 14.53 369.06

SF400-120 0.375 - 4.00 9.52 - 101.6 14.58 370.33 0.300 7.62 0.75 1.90 120 54.43

SF600-120 0.375 - 6.00 9.52 - 152.4 21.00 533.40

ERG120 Application tool for 50 lb. to 120 lb. tensile strength

ERG50 Application tool for 18 lb. to 50 lb. tensile strength

Material: Natural Nylon 6/6 in accordance with ASTM D4066 PA111. Also available in black outdoor

weatherable (suffix “-X”).

Dimensions: Designed according to military standards (MS3367) except for the head length, which is

slightly larger than MIL spec.

Packaging: Standard package is 100 pieces.

Colour Suffix No.

How to Order Colour Cable Ties

Black (outdoor) X

Brown 1

Red 2

Orange 3

Yellow 4

Green 5

Blue 6

Purple 7

Grey 8

White 9

Packaged for handling convenience.

Natural nylon is standard. For coloured cable ties in-line

fasteners add the following suffix numbers to catalogue

numbers.

Example: SF175-50-2 (Red)

For Distributor Packs (100), add suffix “-100”.

Example: SF175-50-100

(Consult your Regional Sales Office for ordering information)

Low-Proﬁle Cable Ties

Cable Ties

www.tnb.ca

T&B ®

C49

Fastening Products

T&B®Badge Holder

The ticket fastener that won't leave you out in the cold.

Thomas & Betts offers ski resorts a convenient, low-cost, quick, and

safe alternative to the metal wire clip currently used to attach ski lift

tickets to skiers' clothing.

T&B®cable ties offer these prominent advantages:

•Designed specifically for lift ticket attachment to prevent damage to

skiers’ clothing

•Incorporates a loop diameter restriction device that forms the proper

sized 1-1/4 inch loop required to hold the lift ticket in place and lay

flat on the skier

•Prevents the tie from being over-tightened and damaging the lift ticket

•May also serve to aid the skier in zipping their coat by extending the

zipper length

•The Badge Holder is tamper resistant and smooth up to the restriction point

to keep it from being shared or reused by other skiers

•The smooth body eliminates the notch sensitivity issue inherent to

all-nylon cable ties

•The Badge Holder is designed with a flexible short round tail, safely

eliminating sharp metal

•Affordable at just pennies per fastener!

The Badge Holder comes in 9 different colours to match the resort's colour

schemes and is made of high quality Nylon 6/6 material to withstand cold

temperatures. It is 5 inches long and has a sturdy 30 lb. tensile strength

rating. Badge Holders may also be heat stamped with additional identification,

such as the resort’s name or web site.

When the snow starts, Badge Holders will be ready to keep things snug, all

the way down the mountain!

Cat. No. Description Qty. UPC

T&B®Badge Holder Ordering Information

SJ-5-30SKI-9-M Ticket Fastener 1,000 bag 78621017017

Natural nylon colour. Please consult your Regional Sales Office for ordering

and availability of colours and heat-stamping.

Dimensions: 5 in.

Construction: Nylon 6/6

Max. Tensile Strength: 30 lb.

5 in.

Ski-Badge Holder Cable Ties

Cable Ties

www.tnb.ca

T&B ®

C50

Ty-Rap ®Fastening Products

Choose from adhesive-backed, epoxy or screw mounting bases!

•Available in a variety of materials for both indoor and outdoor use

•One-piece molding — no lost parts

•Adhesive-backed with pressure-sensitive adhesive tape (where applicable)

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Max. Tie

Width

Accom.

Length Width

Material Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Two-Way Adhesive Mounting Bases

TC5342A TC342A SRA* Adhesive

0.19 1.13 28.58 1.13 28.58

Nylon 6.6 100

1,000

– TC342A-X Weatherable Nylon

–

– TC342 TC2PA Nylon 6.6

– TC342X Weatherable Nylon

– TC342A-FR SRA* Adhesive Flame-Retardant Nylon

– TC342AH-TFR Acrylic

Adhesive

Black High-Temp

Flame-Retardant Nylon

Select the Four-way

configuration you need!

•Eliminates errors in premounting

the base with respect to its

orientation to wire bundle

direction

•Convenient way to mount wire

bundles at cross-over points —

two optional mounting holes

included

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Max. Tie

Width

Accom.

Length Width

Material Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

4-Way Adhesive Mounting Base

TC5345A TC345A

SRA* Adhesive

0.19 1.13 28.58 1.13 28.58

Nylon 6.6 100

1,000

– TC345AFR Flame-Retardant Nylon –

TC5345AX TC345AX Weatherable Nylon 100

TC5345AHTFR TC345AHTFR Acrylic

Adhesive

Black High-Temp

Flame-Retardant Nylon 100

–TC345 TC2PA/Screws Nylon 6.6 –

4-Way Mini Base

TC050X050A-C TC050X050A

SRA* Adhesive

0.10 0.5 12.70 0.5 12.70 Nylon 6.6

100 1,000

TC050X050AX-C TC050X050AX Weatherable Nylon

TC5344A TC344A

0.14 0.75 19.05 0.75 19.05

Nylon 6.6

TC5344AX TC344AX Weatherable Nylon

TC5344 TC344 Screw Mount Nylon 6.6

Large 4-Way Base

TC150X150L TC150X150 Screw Mount

0.19 1.5 38.10 1.5 38.10 Nylon 6.6

500

TC150X150A-L TC150150A SRA* Adhesive

TC150X150AX-L TC150X150AX Weatherable Nylon

TC200X200-L TC200X200 Screw Mount

0.30

2.0 50.80 2.0 50.80

Nylon 6.6

TC200X200A-L TC200X200A SRA* Adhesive

– TC200X200AX Weatherable Nylon

–

– TC368 Screw Mount 0.75 Nylon 6.6

– TC368A SRA* Adhesive

Great versatility!

•Accommodates the entire line of standard cable ties

•4-way base for cable ties up to .184" maximum width and a two-way base for ties up to .301" maximum width

•It may also be mounted with #8 size screw (2 holes)

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Max. Tie

Width

Accom.

Length Width

Material Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Two- and Four-Way Adhesive Mounting Base

TC5347A TC347A SRA* Adhesive

0.30 1.13 28.58 1.13 28.58

Nylon 6.6 100 1,000

TC5347AX – Weatherable Nylon –

– TC347

TC2PA Screws

Nylon 6.6

– 1,000

– TC347FR Flame-Retardant

– TC347X Weatherable Nylon

– TCZ347 Radiation Resistant

Fluoropolymer

Temperature Rating:

32ºF to 150ºF (0ºC to 66ºC)

*Synthetic Rubber Adhesive

Temperature Rating:

32ºF to 150ºF (0ºC to 66ºC)

*Synthetic Rubber Adhesive

Temperature Rating:

32ºF to 150ºF (0ºC to 66ºC)

*Synthetic Rubber Adhesive

Cable Tie Mounting Bases

www.tnb.ca

C51

Ty-Rap ®Fastening Products

Great for securing cables!

•Provides a fast and convenient method of securing bundles

•Single-piece design offers reduced installation time and maximized inventory control

•Integral top cover incorporates a unique ratchet design that is fully adjustable and releasable

•Available in a pressure-sensitive adhesive or screw mount design

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Base

Style

Maximum

Height

(in.)

Clamping Area Std.

Pkg.

Bulk

Pkg.

Min.

(in.)

Min.

(mm)

Max.

(in.)

Max.

(mm)

One-Piece Mounting Clamp

TC5349A-TB TC349A-TB SRA* Adhesive 0.57 0.18 x 0.24 4.57 x 6.10 0.35 x 0.24 0.89 x 6.10

100 1,000

TC5350A-TB TC350A-TB 0.89 0.20 x 0.59 5.08 x 14.99 0.45 x 0.59 11.43 x 14.99

TC5350-TB TC350-TB Screw Mount (#8)

Simple to install!

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Max. Tie

Width

Accom.

Length Width

Material Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Snap-In Mounting Base for Preassembled Ties

TC5353A TC353A SRA* Adhesive 0.19 2.00 50.80 1.00 25.40 Nylon 6/6 25 500

– TC353 TC2PA/Screws –

Hole for no. 6 screw

Natural nylon colour.

Temperature Rating: 32ºF to 150ºF (0ºC to 66ºC).

*Synthetic Rubber Adhesive.

Great for securing cables!

Cat. No. Mounting

Method

Max. Tie

Width

Accom.

Max. Tie Length Width

Material Pkg.

(in.) (mm) (in.) (mm)

Aluminum Mounting Plates

TC105 TC2PA/Screws

0.19

1.00 25.40 0.50 12.70

Aluminum 1,000

TC824-TB TC2PA 1.38 34.93 0.38 9.65

650-41349* TC2PA/Screws

Temperature Rating: 32ºF to 150ºF (0ºC to 66ºC).

*650-41349 has two holes for mounting.

Super strong adhesive!

Cat. No. Mounting Method Pkg.

Mounting Base Adhesive

TC2PA Consists of one tube each, adhesive and activator 1

Cable Tie Mounting Bases

Natural nylon colour.

Temperature Rating:

32ºF to 150ºF (0ºC to 66ºC).

*Synthetic Rubber Adhesive.

www.tnb.ca

C52

Fastening Products

Accepts cable ties up to 50-lb. (222N) tensile strength

(miniature through standard)!

•Supplied on closed cell foam with synthetic rubber-based adhesive

•Use #6 self-tapping screw for added strength if desired

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No. Material Mounting

Method

Height Length Width Slot Height Slot Width Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Adhesive Mounting Cradle

MCNY-1250-9-C MCNY-1250-9-D Natural Nylon 6.6 SRA* Adhesive 0.285 7.24 1.250 31.75 1.000 25.4 0.090 2.29 0.300 7.62 100 50

*Synthetic Rubber Adhesive

Fluoropolymer available for harsh environments!

•SMNY-001 accepts cable ties to 50 lbs. (222N) tensile (miniature through standard)

•SMNY-002 accepts cable ties to 120 lbs. (533N) tensile (miniature through heavy-duty)

•Use #4, #6, #8, or #10 machine screw (as referenced)

Std. Pkg.

Cat. No. Material Mounting

Method

Height Length Width Slot Height Slot Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Screw Mount

SMNY-000-9-D Natural Nylon 6.6 #4 Screw 0.27 6.86 0.57 14.48 0.34 8.64 0.07 1.78 0.12 3.10

500

SMTZ-001-9-D Radiation-Resistant

Fluoropolymer (green) #6, #8 Screw 0.28 7.11 0.60 15.24 0.39 9.77 0.06 1.52 0.20 5.08

SMNY-002-9-D Natural Nylon 6.6

#8, #10 Screw 0.39 9.90 0.88 22.22 0.63 15.87 0.09 2.29 0.33 8.26

SMTZ-002-9-D Radiation-Resistant

Fluoropolymer (green)

SMNY-001-0-D Heat-Stabilized

Black Nylon

#6,#8 Screw 0.28 7.11 0.60 15.24 0.39 9.77 0.06 1.52 0.20 5.08

SMNY-002-0-D #8, #10 Screw 0.39 9.90 0.88 22.22 0.63 15.87 0.09 2.29 0.33 8.26

SMNY series for use in temperatures ranging from -40ºF to 221ºF (-40ºC to 105ºC).

SMTZ series for use in temperatures ranging from -50ºF to 302ºF (-45ºC to 150ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Maximum

Tie Width

Accom.

(in.)

Width Length Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Saddle Support Base

– TC140 #4 Pan Head 0.091 0.344 8.74 0.563 14.30 –

500

TC5141 TC141* #6 Pan Head 0.190 0.439 11.15 0.672 17.07 100

TC5142 TC142 #10 Pan Head 0.301 0.563 14.30 0.922 23.42

This mounting base provides a saddle for the wire run.

Ty-Rap®tie is threaded under bundle and tied in usual manner.

NOTE: For additional materials, refer to Regional Sales Office.

* Add suffix FR for flame-retardant material (TC141 only).

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Tie Mounting Bases

www.tnb.ca

Ty-Rap ®

C53

Fastening Products

Cat. No. Mounting

Method

Maximum

Tie Width

Accom.

(in.)

Width Length Capacity

(Bundles)

Mil. Std.

Part No.

Std.

Pkg.

(in.) (mm) (in.) (mm)

Multiple-Bundle Mounting Strips

TC1101

#6 Screws

0.190 0.50 12.70

1.75 44.45 1 MS3339-1

100

TC1102 3.00 76.20 2 MS3339-2

TC1103 4.25 107.95 3 MS3339-3

TC1104 5.50 139.70 4 MS3339-4

TC1105 6.75 171.45 5 MS3339-5

TC1112

0.301 0.63 15.88

9.60 243.84 6 MS3339-11

TC1113 2.10 53.34 1 MS3339-6

TC1114 3.60 91.44 2 MS3339-7

TC1115 5.10 129.54 3 MS3339-8

TC1116 6.60 167.64 4 MS3339-9

TC1117 8.10 205.74 5 MS3339-10

These nylon mounting strips for parallel installation of wire bundles can accommodate up to six closely spaced bundles.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Maximum

Tie Width Accom. Length Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Single-Bundle Mounting Base

– TC101 #10 Screws 0.190 4.83 0.500 12.7 2.00 50.80 – 1,000

TC503 TC103 1/4 in. Screws 0.301 7.65 0.625 15.88 3.08 78.23 100 500

The TC101 and TC103 nylon bases provide a mounting range for bundles from 1⁄4 in. through 4 in. in diameter.

One mounting hole is slotted to permit adjustment of the bundle position up to the time of actual bundle installation.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Provides a mounting range for bundles from 1/4 in. through 4 in. in diameter!

Permits vertical stacking!

Cat. No. Mounting

Hole Size

Tie Width Accom. Length Max. Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Ty-Rap®Mounting Blocks

TC115-TB #10 0.190 4.83 1.00 25.40 0.47 11.91 1,000

Mounting blocks permit vertical stacking and can be used in any direction.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Tie Mounting Bases

www.tnb.ca

Ty-Rap ®

C54

Fastening Products

Meets military specs as a support in bulkheads and walls!

Cat. No.

Tie Width Accom. Length Max. Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Right-Angle Bundle Support

TC109 0.190 4.83 0.44 11.13 0.56 14.30 200

TC106 0.30 7.62 1.00 25.40 1.00 25.40 1,000

This style meets Military Specification requirements as a support at holes in bulkheads and walls. (MS3341)

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Mount bundles on either side!

Cat. No.

Max.Tie Width

Accom. Length Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Ty-Rap®Stand-Off Brackets

TC375

0.190 4.83

0.75 19.05 3.65 92.71

100TC375X (Weatherable)

TC376 0.67 17.01 1.75 44.45

These brackets permit bundles to be mounted on either side. They also serve as means to raise bundles off the surface.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Weatherable nylon is black.

Weather-resistant and transparent!

Cat. No. Wire Accommodation Std. Pkg.

Aluminum Siding Clip

TC201 1/8 in. Diameter Wire (2-pair station wire) 100

•Transparent — Colour and texture of siding shows through

•Material — Weather-resistant grade polycarbonate

•Designed to accommodate PITTSBURG INTERLOCK metal siding

•Accommodates wires both vertically and/or horizontally

•Provision for utilizing Ty-Rap®cable ties to secure large diameter bundles

Cat. No. Mounting

Method

Width Accom. Max. Tie Width Length Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

In-Line Mounting Base

TC815-TB #10 Screws 0.30 7.62 0.75 19.05 1.13 28.58 1,000

Installs in-line with the wire bundle!

A standard 2-hole base that installs in-line with the wire bundle that conceals it.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Tie Mounting Bases

www.tnb.ca

Ty-Rap ®

C55

Fastening Products

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No.

Mounting

Method

Maximum

Tie Width

Accom.

(in.)

Width Length Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Low-Profile Two-Way Miniature Mounting Bases

TC502 TC102 #8 screw 0.19 0.50 12.70 0.75 19.05 100

1,000

– TC104 #5 screw 0.09 0.32 8.03 0.41 10.31 –

–TC804-TB #2 screw 0.09 –

– TC112-TB #8 screw 0.19

0.38 9.53 0.75 19.05

–

– TC812-TB #10 screw 0.19 –

– TC814-TB #5 screw 0.19 –

Threaded insert permits screw to come from outside of mounting surface.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Ideal for high-density packaging!

•Simply slip Ty-Rap

cable tie under slot in fastened mount, and attach bundle

Cat. No. Mounting

Method Material

Max. Tie

Width

Accom.

Width Length Std.

Pkg.

(in.) (mm) (in.) (mm)

Miniature Base

TC817-TB TC2PA Nylon 6/6 0.19 0.44 11.10 0.44 11.10 1,000

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Std. Pkg.

Cat. No.

Bulk Pkg

Cat. No.

Mounting

Method

Maximum

Tie Width

Accom.

(in.)

Width Length Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Low-Profile Four-Way Mounting Base

– TC826-TB #8 screw 0.19 0.50 12.70 1.00 25.40 – 1,000

TC5828 TC828-TB #8 screw 0.39 9.91 0.88 22.23 100

Handles ties installed in either direction

The TC826-TB mounting base can be used to tie bundles running parallel or perpendicular to length of base. The TC828-TB mounting plate also handles ties

installed in either direction and is somewhat smaller than TC826. Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Tie Mounting Bases

www.tnb.ca

Ty-Rap ®

C56

Fastening Products

Cat. No. Mounting

Hole Size

Maximum

Tie Width

Accom.

(in.)

Width Length

Material Std.

Pkg.

(in.) (mm) (in.) (mm)

Self-Riveting Base

TC116-TB 0.146

0.190 0.5 12.7 0.75 19.05

Nylon 6.6 (Red)

1,000

TC116-0 Nylon 6.6 (Black)

TC118-TB 0.169 Nylon 6.6 (Blue)

TC120 0.196 Nylon 6.6 (Yellow)

Firmly locks into position when projecting pin is pushed into the mounting hole

Slip tie under base to attach bundle.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat. No. Mounting

Hole Size

Maximum

Tie Width

Accom.

(in.)

Width Length

Material Std.

Pkg.

(in.) (mm) (in.) (mm)

Snap-In Mounting Base Cap

TC121-TB

0.250 0.190 0.445 11.30 0.415 10.54

Nylon 6.6

1,000

TCH121†Nylon 6.6 Heat Stabilized

TCH121-0†Nylon 6.6 (Black) Heat Stabilized

Snap-in, premountable base for securing wire bundles in cabinets maintains the attractive

external appearance of the equipment housing — TC121 Snap-Cap

† Not Recognized.

Natural nylon colour.

Nylon 6.6 for use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Heat stabilized for use in temperatures ranging from -40ºF to 221ºF (-40ºC to 105ºC).

1/8" max

Four-way screw mounts for cable ties up to

50-lb. (222 N) tensile strength!

Cat. No.

H L W Slot W Mount

SCR

Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Four-Way Mount

SMNY-220-9-D 0.23 5.84 0.95 25.13 0.50 12.70 0.22 5.59 #6, #8 500

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Tie Mounting Bases

•Mount with #6 or #8 screws

•Available in 6.6 natural nylon

www.tnb.ca

Ty-Rap ®

C57

Fastening Products

STRONG — up to 50-lb. tensile strength!

Natural nylon colour.

For use in temperatures ranging from

-40ºF to 185ºF (-40ºC to 85ºC).

PMNY-185:

•Versatile push mount for cable ties to 50-lb. tensile strength

•For use in 0.187 in./0.192 in. mounting hole for panel thickness 0.030 in. to 0.080 in.

PMNY-245:

•Accepts cable ties to 50-lb. tensile (miniature through standard)

•For use in 0.250 in. mounting hole for maximum panel thickness of 0.062 in.

Cat. No. Material

Height H Length L Width W Slot Height Slot Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Push Mounts

PMNY-185-9-D

Nylon

0.64 16.26 0.43 10.92 0.43 10.92 0.07 1.65 0.07 1.65 500

PMNY-254-9-C 0.36 9.02 0.32 8.13 0.32 8.13 0.05 1.27 0.22 5.59 10

PMNY-245-9-D 500

Std. Pkg.

Cat. No.

Bulk Pkg

Cat. No.

Mounting

Hole Size

Maximum

Tie Width

Accom.

(in.)

Width Length Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm)

Push-In and Bolted Bases

TC5823 TC823-TB 1/4 in. 0.19 0.44 11.13 0.63 15.88 100 1,000

– TC107†#10-32 thd –

† Not Recognized.

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

TC5823

TC107

1/8 in. max.

Cat. No. Material

A B C D Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Push-In and Bolted Bases

MSNY-166-0-M UV Black Nylon 0.49 12.45 0.31 7.87 0.28 7.11 0.18 4.57 1,000

MSNY-187-0-M 0.625 15.87 0.343 8.73 0.281 7.14 0.210 5.33

•For panel thicknesses from 0.060 in. to 0.150 in. to hold separate pieces of material together

•For MSNY-166-0-M used with W4 or N4 Series Cable Clamps, allowable panel thickness is 0.030 in.

to 0.050 in.

•For MSNY-187-0-M used with W6 or N6 Series Cable Clamps, allowable panel thickness is 0.030 in.

to 0.050 in.

Cable Tie Mounting Bases

www.tnb.ca

Ty-Rap ®

C58

Fastening Products

•Diverse cable clamps for bundle diameters from 0.160 in. to 0.620 in.

•Mounted on a rubber-based closed cell foam adhesive

•Flexible center tang for removal or addition of cables

Cat. No. Material

Height H Length L Width W Maximum

Bundle Mounting

Method

Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Round Adhesive Clips

RANY-160-9-D

Nylon

0.250 6.35 0.630 16.0 0.580 14.73 0.160 4.06

Rubber-based

adhesive 500

RANY-280-9-D 0.410 10.41 1.000 25.40 1.000 25.40 0.280 7.11

RANY-530-9-D 15.75 0.620 0.530 13.46

RANY-620-9-D 14.22 0.560 1.250 31.75 1.120 28.45 0.620 15.75

Natural nylon colour.

Adhesive for use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Release and refasten with ease — in three adjustable sizes!

•Three sizes for bundles from 0.118 in. to 0.984 in.

•Ladder-style fastener is easily released and refastened

•Supplied on a rubber-based closed cell foam adhesive

•Optional screw hole for #4 or #5 flat head screw

Cat. No. Material

Height A Length B Width S Maximum

Bundle

Applied

Wire Range

Screw Hole

Diameter Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Adjustable Cable Clamps

ULNY-013-8-C Grey Nylon

0.709 18.00 0.984 24.99 0.314 7.98 2.340 59.44 0.118 - 0.500 3.0 - 12.7

0.110 2.79

100

ULNY-013-9-C Natural Nylon

ULNY-018-8-C

Grey Nylon

0.827 21.00 1.180 29.97 0.472 11.99 3.120 79.25 0.197 - 0.827 5.0 - 21.0

ULNY-023-8-C 0.984 24.99 1.380 35.05 0.551 14.00 3.370 79.25 0.275 - 0.984 7.0 - 25.0 0.135 3.43

Adhesive for use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Choose from four sizes to accommodate bundles up to 1/2 in.

•Clips are provided on a rubber-based closed cell foam adhesive

•Stocked in 6.6 natural nylon colour. Contact your T&B Sales Representative for

availability in special materials

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No. Material

Diameter A B H W Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Press Clips

PCNY-125-9-C PCNY-125-9-D

Nylon

0.13 3.30 0.76 19.30 0.38 9.65 0.21 5.33 0.38 9.65

100 500

PCNY-250-9-C PCNY-250-9-D 0.25 6.35 1.38 35.05 0.69 17.53 0.32 8.13 0.50 12.70

PCNY-375-9-C PCNY-375-9-D 0.38 9.65 1.47 37.34 0.74 18.80 0.44 11.176 0.63 16.00

PCNY-500-9-C PCNY-500-9-D 0.50 12.70 1.59 40.39 0.80 20.32 0.59 15.00 0.75 19.05

Cable Clamps and Clips

Versatile adhesive clips

keep cable paths

organized

www.tnb.ca

Ty-Rap ®

C59

Fastening Products

Eliminate the dangers of loose cables with these clips

•4 sizes to accommodate bundles up to 1/2 in.

•Clips are provided on a rubber-based closed cell foam adhesive

•Stocked in 6.6 natural nylon colour. Contact your T&B Sales Representative for availability

in special materials

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No. Material

Diameter A B H W Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Half Press Clips

HCNY-125-9-C HCNY-125-9-M

Nylon

0.13 3.30 0.49 12.45 0.38 9.65 0.18 4.57 0.38 9.65

100 1,000

HCNY-250-9-C HCNY-250-9-M 0.25 6.35 0.87 22.10 0.69 17.53 0.33 8.38 0.50 12.70

HCNY-375-9-C HCNY-375-9-M 0.38 9.65 0.98 25.90 0.75 19.05 0.42 10.67 0.63 16.00

HCNY-500-9-C HCNY-500-9-M 0.50 12.70 1.11 28.20 0.82 20.83 0.56 14.22 0.75 19.05

Flat design provides an attractive, yet discreet look

•Flat ribbon cable clamp with mounting hole for #8 screw

•Stocked in 6.6 natural nylon colour

•Flexible center tang enables easy removal and replacement of desired cable

Cat. No. Material

Height H Length L Width W Mounting

Method

Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Flat Cable Screw Clip

FSNY-812-9-C Nylon 0.25 6.35 1.19 30.23 1.00 25.40 #8 Screw 100

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Cat. No. Max. Bundle

Width Accepted

H L W Mounting

Method

Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Adhesive Cable Clips

RANY-160-9-D 0.25 0.39 9.91 0.75 19.05 0.75 19.05

Adhesive 25

RANY-280-9-D 0.50 0.63 16.00

1.00 25.40 1.00 25.40

RANY-530-9-D 0.25 0.76 19.30

RANY-620-9-D 0.50

RANY-620-9-D 0.25 0.47 11.94 0.75 19.05 0.75 19.05

RANY-620-9-D 0.50

Natural nylon colour.

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

GC GL

Cable Clamps and Clips

www.tnb.ca

Ty-Rap ®

C60

Fastening Products

Low-profile clip for single or multiple layers of flat ribbon cable

•Supplied on a rubber-based closed cell foam adhesive

•Flexible center tongue for removal or addition of cables

•Stocked in 6.6 natural nylon colour

Natural nylon colour.

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No. Material

Height H Length L Width W Mounting

Method Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.)

Flat Adhesive Clips

FANY-812-9-C FANY-812-9-D Nylon 0.28 7.11 1.00 25.40 1.00 25.40 Adhesive 100 500

Adhesive eliminates need for tools when mounting clips

•Low-profile clip for single or multiple layers of flat ribbon cable

•“Single-Cut” on a rubber-based closed cell foam adhesive

•Grey PVC

•UL Flammability 94 V-0 (clip)

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Std. Pkg.

Cat. No.

Bulk Pkg.

Cat. No. Material

Height H Length L Width W Mounting

Method Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.)

Flat PVC Clips

FRPV-1000-8-C FRPV-1000-8-D Grey PVC 0.42 10.67 1.06 26.92 1.00 25.40 Adhesive 100 500

Ideal for assembly applications

•16 sizes for bundle diameters to 2.38 in.

•Removable and reusable. Twist by hand or with pliers to remove

•Stocked in weatherable Nylon. 100 pieces per package

•Request samples for testing to your application. Tested to 250 psi

Cat. No.

Nominal

Diameter

Closed

Diameter

Thickness

Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Adjustable Cable Clamp

GGNY-344-0-C 0.41 10.41 0.34 8.64

0.7 1.78 0.22 5.59 100

GGNY-406-0-C 0.47 11.94 0.41 10.41

GGNY-468-0-C 0.53 13.46 0.47 11.94

GGNY-531-0-C 0.59 14.99 0.53 13.46

GGNY-593-0-C 0.66 16.76 0.59 14.99

GGNY-672-0-C 0.81 20.57 0.67 17.02

GGNY-750-0-C 0.88 22.35 0.75 19.05

GGNY-875-0-C 1.00 25.40 0.88 22.35

Cat. No.

Nominal

Diameter

Closed

Diameter

Thickness

Width Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Adjustable Cable Clamp

GGNY-953-0-C 0.95 24.13 0.41 10.41

0.7 1.78

0.31 7.87

100

GGNY-1031-0-C 1.81 45.97 1.03 26.16

GGNY-1250-0-C 1.44 36.58 1.25 31.75

0.36 9.14

GGNY-1406-0-C 1.63 41.40 1.41 35.81

GGNY-1593-0-C 1.81 45.97 1.59 40.39

GGNY-1687-0-C 1.91 48.51 1.34 34.04

GGNY-1875-0-C 2.13 54.10 1.88 47.75 0.40 10.16

GGNY-2125-0-C 2.75 69.85 2.13 54.10

Black.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cable Clamps and Clips

www.tnb.ca

Ty-Rap ®

C61

Fastening Products

Choose the diameter you need to clamp a specific-sized cable

•Fully radiused inside edges with size markings in inches and millimeters for

easy identification

•Stocked in natural and black nylon 6.6

•Plain edge cable clamps are designed to perform to NAS-1397P

•18 diameters and 2 widths with mounting holes for #8 and #10 screws

•Replace “-M” or “-D” with “-C ” for 100 pack

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

White

Cat. No.

Black

Cat. No.

Mounting

Hole Size

Closed Dia. ET

Thickness

Width XStd.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Half Press Clips

N4NY-002-9-M N4NY-002-0-M

0.13 3.18 0.34 8.71

0.05 1.27 0.38 9.53

0.22 5.54

1,000

N4NY-003-9-M N4NY-003-0-M 0.19 4.475 0.38 9.60

N4NY-004-9-M N4NY-004-0-M 0.25 6.35 0.42 10.70

N4NY-005-9-M N4NY-005-0-M 0.31 7.92 0.44 11.20

N4NY-006-9-M N4NY-006-0-M 0.38 9.53 0.46 11.79

N4NY-007-9-M N4NY-007-0-M 0.44 11.10 0.50 12.70

N4NY-008-9-M N4NY-008-0-M 0.50 12.70 0.53 13.46

N4NY-002B-9-M N4NY-002B-0-M

#10

0.13 3.18 0.34 8.71

N4NY-003B-9-M N4NY-003B-0-M 0.19 4.475 0.38 9.60

N4NY-004B-9-M N4NY-004B-0-M 0.25 6.35 0.42 10.70

N4NY-005B-9-M N4NY-005B-0-M 0.31 7.92 0.44 11.20

N4NY-006B-9-M N4NY-006B-0-M 0.38 9.53 0.46 11.79

N4NY-007B-9-M N4NY-007B-0-M 0.44 11.10 0.50 12.70

N4NY-008B-9-M N4NY-008B-0-M 0.50 12.70 0.53 13.46

N6NY-004C-9-M N6NY-004C-0-M 0.25 6.35 0.44 11.10

0.06 1.52 0.50 12.70

N6NY-005C-9-M N6NY-005C-0-M 0.31 7.92 0.47 12.04

N6NY-006C-9-M N6NY-006C-0-M 0.38 9.53 0.50 12.70

N6NY-007C-9-M N6NY-007C-0-M 0.44 11.10 0.53 13.54

N6NY-008C-9-M N6NY-008C-0-M 0.50 12.70 0.55 14.05

N6NY-009-9-M N6NY-009-0-M 0.56 14.27 0.60 15.32

N6NY-010-9-M N6NY-010-0-M 0.63 15.88 0.63 15.88

N6NY-011-9-M N6NY-011-0-M 0.69 17.45 0.67 16.89

N6NY-012-9-M N6NY-012-0-M 0.75 19.05 0.70 17.75

N6NY-013-9-M N6NY-013-0-M 0.81 20.62 0.77 19.43

N6NY-014-9-M N6NY-014-0-M 0.88 22.23 0.80 20.19

N6NY-016-9-M N6NY-016-0-M 1.00 25.40 0.83 21.00

N6NY-018-9-D N6NY-018-0-D 1.13 28.58 0.94 23.88

1,000

N6NY-019-9-D N6NY-019-0-D 1.19 30.15 0.96 24.46

N6NY-020-9-D N6NY-020-0-D 1.25 31.75 0.98 24.90

N6NY-022-9-D N6NY-022-0-D 1.38 34.93 1.05 26.54

N6NY-024-9-D N6NY-024-0-D 1.50 38.10 1.11 28.30

Cable Clamps and Clips

www.tnb.ca

Ty-Rap ®

C62

Fastening Products

Ideal for assembly applications

White

Cat. No.

Nominal Dia.

Closed Dia. ET

Thickness

Width

Hole Dia. XStd.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Self-Aligning Cable Clamps Natural Nylon

W4NY-125-9-M 0.63 3.18 0.11 2.90 0.33 8.46

0.04 1.02 0.38 9.53 0.17 4.24

0.26 6.53

1,000

W4NY-187-9-M 0.19 4.75 0.17 4.37 0.36 9.02 0.22 5.54

W4NY-250-9-M 0.25 6.35 0.23 5.94 0.38 9.70 0.19 4.83

W4NY-312-9-M 0.31 7.92 0.30 7.54 0.42 10.72 0.20 5.21

W4NY-375-9-M 0.38 9.53 0.36 9.12 0.45 11.53 0.21 5.33

W4NY-500-9-M 0.50 12.70 0.48 12.30 0.49 12.45 0.27 6.86

W6NY-187-9-M 0.19 4.75 0.17 4.37 0.38 9.53

0.06 1.52 0.50 12.70 0.20 5.16

0.24 6.12

W6NY-250-9-M 0.25 6.35 0.23 5.94 0.41 10.34 0.24 6.12

W6NY-312-9-M 0.31 7.92 0.30 7.54 0.45 11.30 0.28 6.60

W6NY-375-9-M 0.38 9.53 0.36 9.12 0.48 12.30 0.29 7.39

W6NY-437-9-M 0.44 11.10 0.42 10.72 0.52 13.26 0.26 6.68

W6NY-500-9-M 0.50 12.70 0.48 12.30 0.56 14.22 0.27 6.91

W6NY-562-9-M 0.56 14.27 0.55 13.90 0.66 16.69 0.24 6.00

W6NY-625-9-M 0.63 15.88 0.61 15.47 0.64 16.18 0.29 7.37

W6NY-687-9-M 0.69 17.45 0.67 17.10 0.69 17.63 0.33 8.31

W6NY-750-9-M 0.75 19.05 0.73 18.64 0.73 18.44 0.32 8.28

W6NY-812-9-M 0.81 20.62 0.80 20.24 0.78 19.71 0.32 8.20

W6NY-875-9-D 0.88 22.23 0.86 21.82 0.73 18.62 0.31 7.87

500W6NY-1000-9-D 1.00 25.40 0.98 25.00 0.88 22.38 0.29 7.42

W6NY-1250-9-D 1.25 31.75 1.23 31.17 1.01 25.65 0.34 8.61

Self-Aligning Cable Clamps Heat-Stabilized Black Nylon

W4NY-125-0-M 0.13 3.18 0.11 2.90 0.33 8.46

0.04 1.02 0.38 9.53 0.17 4.24

0.26 6.53

1,000

W4NY-187-0-M 0.19 4.75 0.17 4.37 0.36 9.02 0.22 5.54

W4NY-250-0-M 0.25 6.35 0.23 5.94 0.38 9.70 0.19 4.83

W4NY-312-0-M 0.31 7.92 0.30 7.54 0.42 10.72 0.21 5.21

W4NY-375-0-M 0.38 9.53 0.36 9.12 0.45 11.53 0.21 5.33

W4NY-500-0-M 0.50 12.70 0.48 12.30 0.49 12.45 0.27 6.86

W6NY-187-0-M 0.19 4.75 0.17 4.37 0.38 9.53

0.06 1.52 0.50 12.70 0.50 5.16

0.24 6.12

W6NY-250-0-M 0.25 6.35 0.23 5.94 0.41 10.34 0.24 6.12

W6NY-312-0-M 0.31 7.92 0.30 7.54 0.45 11.30 0.28 6.60

W6NY-375-0-M 0.38 9.53 0.36 9.12 0.48 12.30 0.29 7.39

W6NY-437-0-M 0.44 11.10 0.42 10.72 0.52 13.26 0.26 6.68

Cable Clamps and Clips

•Molded-in saddle washer enhances performance and

appearance

•Self-alignment feature makes this clamp ideal for

assembly applications

•14 diameters and 2 widths with mounting holes for #4

through #10 screws

•UL Flammability W.NY 94 V-2; W.TZ 94 V-0

•Stocked in natural and heat stabilized black nylon 6.6,

and fluoropolymer for harsh environments

•Item numbers molded-in for easy identification

•Replace “M’’ or “D’’ with “C’’ for 100 pack

•Temperature Rating: -40ºF to 185ºF (-40ºC to 85ºC)

Heat-Stabilized: -40ºF to 221ºF (-40ºC to 105ºC)

Fluoropolymer: -50ºF to 302ºF (-45ºC to 150ºC)

www.tnb.ca

Ty-Rap ®

C63

Fastening Products

White

Cat. No.

Nominal Dia.

Closed Dia. ET

Thickness

Width

Hole Dia. XStd.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Self-Aligning Cable Clamps Heat-Stabilized Black Nylon (cont’d)

W6NY-500-0-M 0.50 12.70 0.48 12.30 0.56 14.22

0.06 1.52 0.50 12.70 0.20 5.16

0.27 6.91

1,000

W6NY-562-0-M 0.56 14.27 0.55 13.90 0.66 16.69 0.24 6.00

W6NY-625-0-M 0.63 15.88 0.61 15.47 0.64 16.18 0.229 7.379

W6NY-687-0-M 0.69 17.45 0.67 17.10 0.69 17.63 0.33 8.31

W6NY-750-0-M 0.75 19.05 0.73 18.64 0.73 18.44 0.3 8.28

W6NY-812-0-M 0.81 20.62 0.80 20.24 0.78 19.71 0.32 8.20

W6NY-875-0-D 0.88 22.23 0.86 21.82 0.73 18.62 0.31 7.87

500W6NY-1000-0-D 1.00 25.40 0.98 25.00 0.88 22.38 0.29 7.42

W6NY-1250-0-D 1.25 31.75 1.23 31.17 1.01 25.65 0.34 8.61

Self-Aligning Cable Clamps for harsh environments Fluoropolymer (Aqua)

W4TZ-125-5-D 0.13 3.18 0.11 2.90 0.33 8.46

0.04 1.02 0.38 9.53 0.17 4.24

0.26 6.53

500

W4TZ-187-5-D 0.19 4.75 0.17 4.37 0.36 9.02 0.22 5.54

W4TZ-250-5-D 0.25 6.35 0.23 5.94 0.38 9.70 0.19 4.83

W4TZ-312-5-D 0.31 7.92 0.30 7.54 0.42 10.72 0.21 5.21

W4TZ-375-5-D 0.38 9.53 0.36 9.12 0.45 11.53 0.21 5.33

W4TZ-500-5-D 0.50 12.70 0.48 12.30 0.49 12.45 0.27 6.86

W6TZ-187-5-D 0.19 4.75 0.17 4.37 0.38 9.53

0.06 1.52 0.50 12.70 0.20 5.16

0.24 6.12

W6TZ-250-5-D 0.25 6.35 0.23 5.94 0.41 10.34 0.24 6.12

W6TZ-312-5-D 0.31 7.92 0.30 7.54 0.45 11.30 0.28 6.60

W6TZ-375-5-D 0.38 9.53 0.36 9.12 0.48 12.30 0.29 7.39

W6TZ-437-5-D 0.44 11.10 0.42 10.72 0.52 13.26 0.26 6.68

W6TZ-500-5-D 0.50 12.70 0.48 12.30 0.56 14.22 0.27 6.91

W6TZ-625-5-D 0.63 15.88 0.61 15.47 0.64 16.18 0.29 7.37

W6TZ-750-5-D 0.75 19.05 0.67 17.10 0.73 18.44 0.33 8.28

Cable Clamps and Clips

www.tnb.ca

Ty-Rap ®

C64

Fastening Products

Several mounting styles available

•Clamp acts as a retainer during

wire routing, and as a permanent

clamp when desired

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat.

No.

Mounting

Hole Size

Bundle

Dia.

Max. Wire

Width Length Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Mechanical-Locking Routing Clamps

TC88

0.25 6.35 0.50 12.7 0.25 6.35 0.891 22.63 100

TC95 1.00 25.4 0.50 12.7 1.590 40.39

Wires are held 1⁄2 in. above work surface

for easy tying

•Consist of a spring-loaded clip and an elastic

bundle support

•Wires are inserted by snapping them through

spring-loaded clips

Cat.

No. Fastener

Max. Wire

Bundle Dia. Width Height Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Wire-Bundle Retainers

TC86

#6 screws 0.750 19.05 1.750 44.45 1.81 46.05 25

TC87 1.250 31.75 2.469 62.71 2.281 57.94 10

How it works:

A projecting prong is simply pressed into a 1⁄4 in. hole,

where it compresses and locks. The simple ratchet-

type lock is released by moving the locking lever.

•Low installation cost

•Releasable

•For grouping wires in appliances, office equipment and other applications

•Adjustable, self-locking clip requires no tools for installation

Cat.

No.

Mounting

Hole Size

Max. Wire

Bundle Dia. Std.

Pkg.

(in.) (mm) (in.) (mm)

Harness Clips

HCP438 0.250 6.35 0.375 9.53 1,000

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Hardened, nickel-plated,

steel construction

•For wire harness board

manufacturing

Cat.

No.

A B C Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Harness-Board Nails

HBP-1 1.00 25.40

0.625 15.88

0.72 1.83

100

HBP112 1.50 38.10 0.82 2.08

HBP2 2.00 50.80 0.92 2.34

HBP212 2.50 63.50 0.105 2.67

HBP3 3.00 76.20 0.120 3.05

Offers extra support for wires and cables

•TC131 bulkhead mounting base can be installed

from either side

•Ties are installed through the clamp on

either side of the bulkhead

Cat.

No.

Mounting

Method

Tie Width

Accom.

Maximum

Width Length Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Bulkhead Bundle Support Feedthrough

TC131 #6 screws 0.190 4.83 1.115 28.32 1.890 48.00 1,000

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat.

No.

Max. Tie

Width Accom. Width Length Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Wire-Bundle Spacer

TC5339 0.190 4.83 0.266 6.76 0.500 12.70 100

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Keep wire bundles apart

•AC-loop

•Easy to add

wires

Cat.

No.

Mounting

Method

Bundle

Dia.

Maximum

Wire Width Std.

Pkg.

(in.) (mm) (in.) (mm)

Bundle-Retaining Clamp

TC70

#10 screws

0.25 6.35 0.40 10.16

100

TC71 0.50 12.7

TC72 0.75 19.05

0.50 12.7TC73 1.00 25.4

TC74 1.50 38.10

Rigid PVC construction.

For use in temperatures ranging from -40ºF to 122ºF (-40ºC to 50ºC).

Cat.

No.

Max. Tie

Width Size Bundle

Hole Size

Std.

Pkg.

(in.) (mm) (in.) (mm)

TY-RAP®Saddle Mounting Plate

TC92 0.190 4.83 1/2-1-1/4 12.7-31.75 #6 screws 100

Natural nylon colour.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

•For use with round bundles

Mounting Hole

for #6 Screw

1/2"

5/8"

Range 1/2"

9/16"

Harnessing Accessories

w w w . t n b . c a

Ty-Rap ®

C65

Fastening Products

Designed for indoor or outdoor use and heavy-duty applications

•Quick and easy to install on existing metal framing channel

•Installs with a push and twist

•Smooth design protects cable insulation

•Takes range of cable diameters

When fastening wire bundles, cables or hoses to framing channels, you can cut costs considerably by using the Ty-Rap®cable clamp. It’s made of smooth, weather-resistant nylon

and designed to protect cable insulation and hoses from wear or damage, which can occur with metal clamps. The clamp may be used for both indoor or outdoor applications. It

quickly installs in the framing channel with a simple push and twist. It requires no screws, nuts or tools. The clamp fits all 1-1/2 in. and 1-5/8 in. channels regardless of channel

depth.

Cat. No.

Channel

Size

Max. Tie

Width Accom. Std.

Pkg.

(in.) (in.) (mm)

Framing Channel Clamp

TC5363X 1-1/2 and 1-5/8 0.301 7.65 50

Made from high-impact weather-resistant black nylon.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Specially designed head is range-taking

Cat. No.

Hole Size in

Masonry

Max. Tie

Width Accom. Std.

Pkg.

(in.) (in.) (mm)

Framing Channel Clamp

TC5358 1/4 0.190 4.83 100

TC5359 3/8 0.500 12.70 50

Made of a special impact and ultraviolet-resistant black nylon.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Weather-resistant!

•For use with lashing ties up to .500 in. width (i.e. TY5409)

•High impact

Cat. No. Mounting

Method

Tid Width

Accom.

Maximum

Width Length Std.

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm)

Ty-Rap®Mounting Base for Lashing Tie

TC5355 #8 screws

0.500 12.70 0.750 19.05 1.750 44.45 25TC5356 #10 screws

TC5357 1/4 in. screws

Black nylon construction.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Mounting Bases for Heavy-Duty Applications

•Quick, easy installation without cumbersome adhesives or epoxies

•Provides a quick, easy and dependable means of attaching cable and wires to

masonry surfaces

•Installs by tapping it into a drilled hole

•It’s immediately ready to accept a cable tie and wire bundle — no tedious surface

preparation; no waiting for adhesives to set

•Replaces a variety of anchors, clamps, screws and adhesives

•Designed for both indoor and outdoor applications

•Only two sizes to stock — reduces inventory

www.tnb.ca

Ty-Rap ®

C66

Fastening Products

A fast and simple harnessing method for neat, versatile wire

management

Thomas & Betts Stud Mount Fastening System is a fast and simple harnessing method

for neat, versatile, cord, cable, hose, and wire management. Using a custom drill bit for

your 3⁄8 in. power drill, the Stud Mount base is quickly attached onto a threaded stud

or bolt to the proper torque—every time. The innovative “X” design of the base reliably

supports many types of cable or hose assemblies using a wide range of conventional

T&B®cable ties. Designed with 10 separate lashing positions, the Stud Mount offers

unlimited wire harnessing arrangements. T&B’s Stud Mount is available in four

convenient stud bolt sizes.

•Great for harnessing wires, cables and hoses to truck and trailer chassis

•Fast, easy installation, using standard 3⁄8 in. power drill and application tool or

simply hammer on

•Unlimited harnessing flexibility using conventional T&B®cable ties

•Custom drill bit quickly installs base to proper torque — won’t crack or break

mounting base due to being overtightened

•Unique 4-way multi-directional design

•10-position harness capability

•Available for 3⁄8 in., 1⁄2 in., 5⁄8 in., and 3⁄4 in. stud/bolt sizes

•Self-tapping thread design for reliable installation onto stud

•High pull-out strength of 500+ lb.

The Stud Mount Cable Fastening System includes a range of bases and the

custom drill bit that mounts all sizes.

During installation, the custom Stud Mount drill bit application tool

ejects itself from mounting base, ensuring proper torque and preventing

cracking or breaking of the mount from being overtightened.

Virtually unlimited harnessing flexibility is provided in the unique

10-position harness design of the Stud Mount base.

Cat. No. Description

Stud

Size

(in.)

Material Colour Std.

Pkg.

Stud Mount Fastening System

XMNY-375-0-D

Mount Fastener

3/8

Nylon,

UV Stabilized Black 500

XMNY-500-0-D 1/2

XMNY-625-0-D 5/8

XMNY-750-0-D 3/4

WTXM Application Tool – Tool Steel – 1

Material: Impact-resistant weatherable black nylon.

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Mounting Bases for Heavy-Duty

Applications

www.tnb.ca

Ty-Rap ®

C67

Fastening Products

Install with gaps for greater flexibility or butted together for

maximum abrasion resistance, insulation and rigidity!

•Packaged in 100 foot reels

•Protects bundles from 0.063 in. to 7 in. (1.6 mm to 177.8 mm) diameters

•Available in three material types

•Also commonly known as reverse cut, left-handed cut or

counter-clockwise cut

•For use with cutting tool SR-100 (see page C69)

•UL 94 HB Flammability Rating

Cat. No. Material

Outside

Diameter Pitch Nominal Wall

Thickness

Minimum/Maximum

Bundle Range Reel

Qty.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Spiral Wrap

SRPE-125-9-C

Natural Polyethylene

0.125 3.18 0.210 5.33 0.35 0.89 0.06 1.60 0.50 12.70

1 (100 ft.)

SRPE-187-9-C 0.187 4.75 0.240 6.10 0.040 1.02 0.13 3.18 1.50 38.10

SRPE-250-9-C 0.250 6.35 0.375 9.53 0.045 1.14 0.19 4.78 2.00 50.80

SRPE-375-9-C 0.375 9.53 0.438 11.13 0.052 1.32 0.31 7.95 3.00 76.20

SRPE-500-9-C 0.500 12.70 0.563 14.30 0.062 1.57 0.38 9.53 4.00 101.60

SRPE-625-9-C 0.625 15.88 0.625 15.88 0.060 1.57 0.63 15.88 4.50 114.30

SRPE-750-9-C 0.750 15.88 0.750 19.05 0.65 1.65 0.75 19.05 5.00 127.00

SRPE-1000-9-C 1.000 25.40 1.110 28.19 0.70 17.78 1.00 25.40 7.00 177.80

SRPE-125-0-C

Weatherable

Black Polyethylene

0.125 3.18 0.210 5.33 0.35 0.89 0.06 1.60 0.50 12.70

SRPE-187-0-C 0.187 4.75 0.240 6.10 0.040 1.02 0.13 3.18 1.50 38.10

SRPE-250-0-C 0.250 6.35 0.375 9.53 0.045 1.14 0.19 4.78 2.00 50.80

SRPE-375-0-C 0.375 9.53 0.438 11.13 0.052 1.32 0.31 7.95 3.00 76.20

SRPE-500-0-C 0.500 12.70 0.563 14.30 0.062 1.57 0.38 9.53 4.00 101.60

SRPE-625-0-C 0.625 15.88 0.625 15.88 0.060 1.57 0.63 15.88 4.50 114.30

SRPE-750-0-C 0.750 15.88 0.750 19.05 0.065 1.65 0.75 19.05 5.00 127.00

SRPE-1000-0-C 1.000 25.40 1.110 28.19 0.070 1.78 1.00 25.40 7.00 177.80

SRNY-187-9-C

Natural Nylon 6.6

0.190 4.75 0.240 6.10 0.025 0.64 0.13 3.18 1.50 38.10

SRNY-250-9-C 0.250 6.35 0.375 9.53 0.030 0.76 0.19 4.78 2.00 50.80

SRNY-375-9-C 0.375 9.53 0.438 11.13 0.040 0.89 0.31 7.95 3.00 76.20

SRNY-500-9-C 0.500 12.70 0.563 14.30 0.040 0.89 0.38 9.53 4.00 101.60

Polyethylene

Available in natural

and weatherable black.

For general indorr use to

122ºF (50ºC). Material is

flexible and easy to work with.

Sold in 100-ft. rolls.

Weatherable

Polyethylene

Available in black only.

Designed to resist ultraviolet

light in outdoor applications.

Flame-Retardant

Polyethylene

Available in white only.

Material is UL 94 V-0

rated. More economical

and less rigid than nylon.

Nylon 6.6

Available in natural only.

Offers highest abrasion

resistance and rigidity.

Self-extinguishing to

UL 94 HB and a UL

Recognized Component.

Fluoropolymer

Available in opaque colour.

Excellent resistance to harsh

environments 338ºF (170ºC)

max operating temperature.

Wire Protection Products

Spiral Wrap

www.tnb.ca

Ty-Rap ®

C68

Fastening Products

Perfect for protection of bundles from 0.063 in. to 7 in.

diameters

•Install with gaps for greater flexibility or butted together for maximum

abrasion resistance, insulation, and rigidity

•Available in three materials

•Also known as right-hand cut or clockwise cut

•Use cutting tool SR-100 (see page C69)

Cat. No. Material

Outside

Diameter Pitch Nominal Wall

Thickness

Minimum/Maximum

Bundle Range UL

Flammability

Reel

Qty.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Forward Cut Spiral Wrap

SRPE-125F-9-C

Natural Polyethylene

0.19 4.75 0.24 6.10 0.04 1.02 0.06 1.60 0.50 12.70

94 HB

1 (100 ft.)

SRPE-187F-9-C 0.19 4.75 0.24 6.10 0.04 1.02 0.13 3.18 1.50 38.10

SRPE-250F-9-C 0.25 6.35 0.38 9.53 0.05 1.14 0.19 4.78 2.00 50.80

SRPE-375F-9-C 0.38 9.53 0.44 11.13 0.05 1.32 0.31 7.95 3.00 76.20

SRPE-500F-9-C 0.50 12.70 0.56 14.30 0.06 1.57 0.38 9.53 4.00 101.60

SRPE-625F-9-C 0.63 15.88 0.63 15.88 0.06 1.57 0.63 15.88 4.50 114.30

SRPE-750F-9-C 0.75 19.05 0.75 19.05 0.07 1.65 0.75 19.05 5.00 127.00

SRPE-1000F-9-C 1.00 25.40 1.11 28.19 0.07 1.78 1.00 25.40 7.00 177.80

SRPE-125F-0-C

Weatherable

Black Polyethylene

0.19 4.75 0.24 6.10 0.04 1.02 0.06 1.60 0.50 12.70

SRPE-187F-0-C 0.19 4.75 0.24 6.10 0.04 1.02 0.13 3.18 1.50 38.10

SRPE-250F-0-C 0.25 6.35 0.38 9.53 0.05 1.14 0.19 4.78 2.00 50.80

SRPE-375F-0-C 0.38 9.53 0.44 11.13 0.05 1.32 0.31 7.95 3.00 76.20

SRPE-500F-0-C 0.50 12.70 0.56 14.30 0.06 1.57 0.38 9.53 4.00 101.60

SRPE-625F-0-C 0.63 15.88 0.63 15.88 0.06 1.57 0.63 15.88 4.50 114.30

SRPE-750F-0-C 0.63 15.88 0.75 19.05 0.07 1.65 0.75 19.05 5.00 127.00

SRPE-1000F-0-C 1.00 25.40 1.11 28.19 0.07 1.78 1.00 25.40 7.00 177.80

SRFR-125F-WH-C

White

Flame-Retardant

Polyethylene

0.19 4.75 0.24 6.10 0.04 1.02 0.13 3.18 1.50 38.10

94 HB

SRFR-187F-WH-C 0.19 4.75 0.24 6.10 0.04 1.02 0.19 4.78 2.00 50.80

SRFR-250F-WH-C 0.25 6.35 0.38 9.53 0.05 1.14 0.31 7.95 3.00 76.20

SRFR-375F-WH-C 0.38 9.53 0.44 11.13 0.05 1.32 0.38 9.53 4.00 101.60

SRFR-500F-WH-C 0.50 12.70 0.56 14.30 0.06 1.57 0.19 2.00 2.00 50.80

SRTL-250F-9-C Fluoropolymer 0.25 6.35 0.38 9.53 0.05 1.32 0.31 3.00 3.00 76.20

SRTL-500F-9-C 0.50 12.70 0.56 14.30 0.06 1.57 0.38 4.00 4.00 101.60

Polyethylene

Available in natural

and weatherable black.

For general indoor use to

122ºF (50ºC). Material is

flexible and easy to work with.

Sold in 100-ft. rolls.

Weatherable

Polyethylene

Available in black only.

Designed to resist ultraviolet

light in outdoor applications.

Flame-Retardant

Polyethylene

Available in white only.

Material is UL 94 V-0

rated. More economical

and less rigid than nylon.

Nylon 6.6

Available in natural only.

Offers highest abrasion

resistance and rigidity.

Self-extinguishing to

UL 94 HB and a UL

Recognized Component.

Fluoropolymer

Available in opaque colour.

Excellent resistance to harsh

environments 338ºF (170ºC)

max operating temperature.

Wire Protection Products

Spiral Wrap

www.tnb.ca

Ty-Rap ®

C69

Fastening Products

Suitable for round hole or odd-shape applications!

•Meets MS21266

•Available in three materials for panel thicknesses from

0.015 in. to 0.192 in.

•Grommet is used to protect panel edges and knockouts

where the chafing of passing wires is a concern

•Also available in fluoropolymer material for harsh environments

•Strip length – 12-3/4 in.

Std.

Cat. No.

Bulk

Cat. No. Material

A B C D For Panel

Thickness Military

Standard

Numbers

Std.

Pkg.

Bulk

Pkg.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Molded Grommeting

GSNY-052-9-C –

Natural

Nylon 6.6

0.15 3.81 0.06 1.42

0.16 3.94

0.10 2.54

0.02-0.052 0.38-1.32 MS-21266-1N

100 –

GSNY-085-9-C – 0.18 4.45 0.09 2.29 0.05-0.085 1.35-2.16 MS-21266-2N

GSNY-128-9-C – 0.22 5.59 0.13 3.33 0.09-0.128 2.18-3.25 MS-21266-3N

GSNY-192-9-C – 0.36 8.26 0.20 4.95 0.23 5.84 0.19-0.192 3.25-4.88 MS-21266-4N

GSTZ-052-9-C –

Fluoropolymer

0.15 3.81 0.06 1.42

0.16 3.94

0.02-0.052 0.38-1.32 MS-21266-1T

GSTZ-085-9-C – 0.18 4.45 0.09 2.29 0.05-0.085 1.35-2.16 MS-21266-2T

GSTZ-128-9-C – 0.22 5.59 0.13 3.33 0.09-0.128 2.18-3.25 MS-21266-3T

GSFR-052-WH-C –

Flame-

Retardant

White

0.15 3.81 0.06 1.42 0.02-0.052 0.38-1.32

–

– GSFR-052-WH-D 0.15 3.81 0.06 1.42 0.02-0.052 0.38-1.32 – 500

GSFR-085-WH-C – 0.18 4.45 0.09 2.29 0.05-0.085 1.35-2.16 100 –

GSFR-128-WH-C – 0.22 5.59 0.13 3.33 0.09-0.128 2.18-3.25

High-carbon, Teflon®coated steel blade!

Use our SR-100 cutting tool for all your spiral wrap, plastic pipe and PVC conduit

needs up to 1-1/4 IN. I.D.

•Contoured handle resists tube crushing

•Produces no “sawdust” — no need to debur

•Lightweight, low-profile and no exposed blade when stored

Cat. No. Description

SR-100 Cutting Tool

SR-R Replacement blade

Teflon®is a trademark of the DuPont Corporation.

Wire Protection Products

Molded Grommeting

www.tnb.ca

Ty-Rap ®

C70

Fastening Products

Line panel

edges and

knockouts!

Cat. No. Material

Max. Panel

Thickness

Grommeting

Thickness

Grommeting

Height

Grommeting

Width

Flammability

Reel

Qty.

(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Extruded Grommeting

GRNY-040-9-C

Natural Nylon

0.04 1.02 0.04 1.02 0.19 4.83 0.13 3.18

94 V-2

1 (100 ft.)

GRNY-052-9-C 0.05 1.32

GRNY-062-9-C 0.06 1.57

0.05 1.32

0.20 5.08 0.17 4.32

GRNY-085-9-C 0.09 2.16

GRNY-100-9-C 0.10 2.54 0.22 5.89 0.21 5.33

GRNY-125-9-C 0.13 3.18 0.20 5.21

GRNY-187-9-C 0.19 4.75 0.27 6.86 0.28 6.99

GRNY-250-9-C 0.25 6.35 0.28 7.11 0.37 9.40

GRNY-040-0-C

Black Nylon

0.04 1.02 0.04 1.02 0.19 4.83 0.13 3.18

GRNY-052-0-C 0.05 1.32

GRNY-062-0-C 0.06 1.57

0.05 1.32

0.20 5.08 0.17 4.32

GRNY-085-0-C 0.09 2.16

GRNY-100-0-C 0.10 2.54 0.22 5.89 0.21 5.33

GRNY-125-0-C 0.13 3.18 0.20 5.21

GRNY-187-0-C 0.19 4.75 0.27 6.86 0.28 6.99

GRNY-250-0-C 0.25 6.35 0.28 7.11 0.37 9.40

GRPE-040-9-C

Natural

Polyethylene

0.04 1.02 0.04 1.02 0.19 4.83 0.13 3.18

94 HB

GRPE-052-9-C 0.05 1.32

GRPE-062-9-C 0.06 1.57

0.05 1.32

0.20 5.08 0.17 4.32

GRPE-085-9-C 0.09 2.16

GRPE-100-9-C 0.10 2.54 0.22 5.89 0.21 5.33

GRPE-125-9-C 0.13 3.18 0.20 5.21

GRPE-187-9-C 0.19 4.75 0.27 6.86 0.28 6.99

GRPE-250-9-C 0.25 6.35 0.28 7.11 0.37 9.40

GRUPE-040-9-C

Solid Wall

Polyethylene

0.04 1.02 0.04 1.02 0.19 4.83 0.13 3.18

GRUPE-052-9-C 0.05 1.32

GRUPE-062-9-C 0.06 1.57

0.05 1.32

0.20 5.08 0.17 4.32

GRUPE-085-9-C 0.09 2.16

GRUPE-100-9-C 0.10 2.54 0.22 5.89 0.21 5.33

GRUPE-125-9-C 0.13 3.18 0.20 5.21

GRUPE-187-9-C 0.19 4.75 0.27 6.86 0.28 6.99

GRUPE-250-9-C 0.25 6.35 0.28 7.11 0.37 9.40

GRFR-040-WH-C

Flame-Retardant

White Polyethylene

0.04 1.02 0.04 1.02 0.19 4.83 0.13 3.18

94 V-0

GRFR-052-WH-C 0.05 1.32

GRFR-062-WH-C 0.06 1.57

0.05 1.32

0.20 5.08 0.17 4.32

GRFR-085-WH-C 0.09 2.16

GRFR-100-WH-C 0.10 2.54 0.22 5.89 0.21 5.33

GRFR-125-WH-C 0.13 3.18 0.20 5.21

GRFR-187-WH-C 0.19 4.75 0.27 6.86 0.28 6.99

GRFR-250-WH-C 0.25 6.35 0.28 7.11 0.37 9.40

Wire Protection Products

•Used to line panel edges and

knockouts where the chafing of

passing wires is a concern

•Available in 8 stock sizes in 100-ft.

lengths for panels from 0.040 in.

(1.02 mm) to 0.250 in. (6.35 mm)

thick

•A variety of stocked materials to

cover a wide range of applications

•Solid Wall Polyethylene is ideal for

protection of glass, sheet metal,

wood panels, or other sheet-form

materials

Extruded Grommeting

w w w . t n b . c a

Ty-Rap ®

C71

Fastening Products

Available in handy mini spools or bulk reels!

Thomas & Betts braided wire protection sleeving is used to bundle and protect wires and

cables from abrasion and excessive wear. Its flexible, lightweight, open weave construc-

tion installs easily over a variety of bundle diameters and shapes. The sleeving is resistant

to chemicals, fungus, fuels, UV sunlight, and has an indefinite shelf life. It’s easily cut with

a hot knife, which seals the end, preventing fraying. Ends can be secured using Ty-Rap®

cable ties.

Available in:

•Handy mini spools or bulk reels

•Eight sizes from 1/8 in. (3.18 mm) to 2-1/2 in. (63.5 mm) nominal I.D. size

•Solid or wraparound hook and loop braided expandable wire sleeving

•Meets UL94V-1

•Meets Federal Motor Vehicle Standard No. FMV SS 302

Types of Materials

Polyethylene Terephthalate (P.E.T.)

A black 0.010 in. (0.25mm)

polyester monofilament material

designed for indoor and outdoor

applications. It’s rated for

continuous operating temp.

-103ºF to 257ºF (-75ºC to 125ºC).

F – Flame Retardant Polyethylene

Terephthalate (P.E.T.)

A 0.010 in. (0.25 mm) self-

extinguishing polyester

monofilament material that can be

used indoors and outdoors. It’s

provided in black with white tracer

for identification, and is rated for

continuous operating temp.

-103ºF to 257ºF (-75ºC to 125ºC).

Meets UL 94V-1 Flammability

Rating.

Cat. No.

Nominal I.D.

Colour

Nominal Diameter Range

Reel Size Std.

Pkg.

(in.) (mm) (in.) (mm)

Braided Expandable Wire Protection Sleeving

S250PT-0 0.250 6.35

Black

0.125 to 0.375 3.18 to 9.53

M = 1000 ft.

D = 500 ft.

K = 250 ft.

T = 200 ft.

C = 100 ft.

L = 50 ft.

S375PC-0 0.375 9.53 0.187 to 0.625 4.75 to 15.88 1

Catalogue Number System

S= Braided Expandable Wire Sleeving

Materials

P= P.E.T. (Polyethylene Terephthalate)

F= Flame-retardant P.E.T.

PW = P.E.T. hook & loop wraparound sleeving

FW = Flame-retardant P.E.T. hook & loop

wraparound sleeving

Nominal I.D. Equivalents

0.125 = 1/8 in. 1.250 = 1-1/4 in.

0.250 = 1/4 in. 1.500 = 1-1/2 in.

0.375 = 3/8 in. 1.750 = 1-3/4 in.

0.500 = 1/2 in. 2.000 = 2 in.

0.750 = 3/4 in. 2.500 = 2-1/2 in.

Wire Protection Products

Braided Sleeving

www.tnb.ca

Ty-Rap ®

C72

Fastening Products

Cat. No. Nominal I.D. Colour

Nominal Diameter

Range Spool

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

P.E.T. Braided Expandable Wire Sleeving — Mini Spool

S250PT-0 0.25 6.35

Black

0.13 to 0.38 3.18 to 9.53 200 ft. / 60.96 m

S375PC-0 0.38 9.53 0.19 to 0.63 4.75 to 15.88 125 ft. / 38.10 m

S500PC-0 0.50 12.70 0.25 to 0.75 6.35 to 19.05 100 ft. / 30.48 m

S750PC-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75

S1250PL-0 1.25 31.75 0.75 to 31.75 19.05 to 44.45 50 ft. / 15.24 m

Types of Materials

NOTE: Order by spool, not per foot.

Cat. No. Nominal I.D. Colour

Nominal Diameter

Range Spool

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

Flame Retardant Braided Expandable Wire Sleeving — Mini Spool

S250FT-0 0.25 6.35

Black with

White Tracer

0.13 to 0.38 3.18 to 9.53 200 ft. / 60.96 m

S500FC-0 0.50 12.70 0.25 to 0.75 6.35 to 19.05 100 ft. / 30.48 m

S750FC-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75

S1250FL-0 1.25 31.75 0.75 to 31.75 19.05 to 44.45 50 ft. / 15.24 m

Safety first!

NOTE: Order by spool, not per foot.

Cat. No. Nominal I.D. Colour Nominal Diameter Range Spool

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

P.E.T. Hook and Loop, Wraparound Sleeving — Mini Spool

S500PWL-0 0.50 12.70

Black

0.25 to 0.75 6.35 to 19.05

50 ft. / 15.24 m 1

S750PWL-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75

S1250PWL-0 1.25 31.75 0.75 to 31.75 19.05 to 44.45

S2000PWL-0 2.00 50.80 1.50 to 3.50 38.10 to 88.90

Enables for easy wrapping of existing wire harnesses and cables!

NOTE: Order by spool, not per foot.

Cat. No. Nominal I.D. Colour Nominal Diameter Range Spool

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

Flame Retardant Hook and Loop, Wraparound Sleeving — Mini Spool

S500FWL-0 0.50 12.70

Black with

White

Tracer

0.25 to 0.75 6.35 to 19.05

50 ft. / 15.24 m 1

S750FWL-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75

S1250FWL-0 1.25 31.75 0.75 to 31.75 19.05 to 44.45

S2000FWL-0 2.00 50.80 1.50 to 3.50 38.10 to 88.90

Convenient for rework without disrupting existing connection!

NOTE: Order by spool, not per foot.

•No tools required to close the sleeving

•Hook and loop material is made of 100%

nylon

Wire Protection Products

Braided Sleeving

www.tnb.ca

Ty-Rap ®

C73

Fastening Products

Cat. No. Nominal I.D. Colour Nominal Diameter Range Reel

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

P.E.T. Braided Expandable Wire Sleeving — Bulk Reel

S125PM-0 0.125 3.18

Black

0.09 to 0.250 2.39 to 6.35 1,000 ft. / 304.80 m

S250PM-0 0.25 6.35 0.125 to 0.375 3.18 to 9.53

S500PD-0 0.50 12.70 0.25 to 0.75 6.35 to 19.05 500 ft. / 152.40 m

S750PK-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75 250 ft. / 76.20 m

S1250PK-0 1.25 31.75 0.75 to 1.75 19.05 to 44.45

S1500PT-0 1.50 38.10 1.00 to 2.50 25.40 to 63.50

200 ft. / 60.96 m

S1750PT-0 1.75 44.45 0.125 to 0.375 31.75 to 59.85

S2000PT-0 2.00 50.80 1.50 to 3.50 38.10 to 88.90

S2500PT-0 2.50 63.50 1.75 to 4.50 44.45 to 114.30

Buy in bulk and save!

NOTE: Order by spool, not per foot.

Cat. No. Nominal I.D. Colour Nominal Diameter Range Reel

Quantity

Std.

Pkg.

(in.) (mm) (in.) (mm)

Flame Retardant Braided Expandable Wire Sleeving — Bulk Reel

S125FM-0 0.125 3.18

Black with

White Tracer

0.09 to 0.250 2.39 to 6.35 1,000 ft. / 304.80 m

S250FM-0 0.25 6.35 0.125 to 0.375 3.18 to 9.53

S375FD-0 0.38 9.53 0.19 to 63 4.75 to 15.88 500 ft. / 152.40 m

S500FD-0 0.50 12.70 0.25 to 0.75 6.35 to 19.05

S750FK-0 0.75 19.05 0.50 to 1.25 12.70 to 31.75

250 ft. / 76.20 mS750FK-9 0.75 19.05 White with

Black Tracer 0.50 to 1.25 12.70 to 31.75

S1250FK-0 1.25 31.75 Black with

White Tracer

0.75 to 1.75 19.05 to 44.45

S1750FT-0 1.75 44.45 0.125 to 0.375 31.75 to 59.85

200 ft. / 60.96 m

S1750FT-9 1.75 44.45 White with

Black Tracer 0.125 to 0.375 31.75 to 59.85

S2000FT-0 2.00 50.80 Black with

White Tracer

1.50 to 3.50 38.10 to 88.90

S2500FT-0 2.50 63.50 1.75 to 4.50 44.45 to 114.30

Choose from a variety of reel sizes!

NOTE: Order by spool, not per foot.

For other colours, lengths, sizes and materials, please Contact your Regional Sales Office.

Cat. No. Description Std.

Pkg.

Sleeving End Cutter/Sealer Tools

WTBM Benchmount End Cutter/Sealer Tool, 110V AC 1

The right tool for the job!

It’s recommended that the sleeving be cut with a hot knife for a straight cut and to seal the ends, which prevents fraying.

Wire Protection Products

Braided Sleeving

www.tnb.ca

Ty-Rap ®

C74

Fastening Products

The most comfortable and efficient hand tool available for installing

cable ties!

Thomas & Betts set out to develop a high performance and very reliable hand-operated

cable tie installation tool. It’s ergonomic with more features than any competing tool on the

market. This new and improved Ty-Rap®Cable Tie Installation Tool is the result, and it fits

the bill in every aspect. Our engineers carefully considered user comfort and designed this

rugged yet lightweight, well-balanced tool to reduce stress, fatigue and the risk of carpal

tunnel syndrome and other cumulative trauma disorders to the hand and wrist. They didn’t

stop with ergonomics, however. This new tool offers a flush cable tie tail-to-head trim, a

longer handle stroke requiring less handle force, higher tension capabilities and much, much

more!

Designed for Efficiency

•Wide cable-tie insertion gap makes it easier to insert tie into tool

•Tension adjustment wheel on nose offers easy access and quick setting — about five

times faster than competing tools!

•Tension-locking mechanism maintains constant tension setting, even when tool is

frequently put down and picked up again

•Flush tail-to-head cut-off eliminates sharp cable tie ends that can cut or scratch

installers, wires and nearby devices

•Longest stroke length available on the market — a full 1 in. — means fewer handle-

tensioning cycles to save time and lower installation costs

Designed for Comfort

•360° rotating nose offers maximum flexibility in any position, especially in tight spaces —

no twisting of tool required!

•Adjustable grip span adapts to fit large or small hands

•Anti-recoil cut-off mechanism reduces shock and vibration to hand and wrist

•High-low handle travel feature offers lowest handle force with highest tension in any

hand-operated cable tie installation tool on the market

•Handles constructed from rugged, lightweight, high-impact polymer in a balanced design

with soft, over-molded, round-edged grips for added user comfort

Specifications

•Dimensions: 7 in. (177 mm) L x 5 in. (127 mm) H x 1-5/8 in. (41.3 mm) W

•Weight: 9 oz. (255 g)

Cat. No. Description Std.

Pkg.

Ty-Rap®Cable Tie Installation Tool

ERG50 Tool for 18–50 lb. (80–222 N.) Cable Ties 1

ERG120 Tool for 50–120 lb. (222–533 N.) Cable Ties

NEW!

Cable Tie Installation Tools

www.tnb.ca

Ty-Rap ®

C75

Fastening Products

Boost productivity and reduce user fatigue in demanding, high-volume

cable tie installations!

For fast, consistent installation of cable ties in high-volume applications, you can’t beat the new

Ty-Rap®Pneumatic Cable Tie Installation Tool. Pneumatic power combined with a balanced,

ergonomic design enables you to tension and trim large quantities of Ty-Rap®cable ties in rapid

succession with accuracy and one-button ease.

•Easy, one-step tensioning and cut-off of cable ties

•Narrow nose rotates 360º to maneuver in tight spaces

•Easy-access tension-adjustment wheel at nose with locking mechanism for

repetitive-tension work

•Spare cutting blade storage in handle

•Cuts tail off flush — no sharp ends to injure installers or damage cables

•Holds tails captive until ejected by operator — no mess to clean up

•Soft, over-molded grip with over-sized trigger

•Wide cable-tie insertion gap — no fumbling to insert tie

Specifications

•Dimensions: 10 in. L x 6-1/4 in. H x 1-5/8 in. W

•Weight: 14 oz.

•Operating Pressure: 85–100 psi (non-lubricated air)

•Cable Tie Tensile-Strength Range: 18–50 lb.

Cat. No. Description Std.

Pkg.

Ty-Rap®Pneumatic Cable Tie Installation Tool

ERG50P Pneumatic Cable Tie Installation Tool 1

for 18–50 lb. Ties (includes 9-ft. air hose) 1

Tightens cable tie and cuts flush in one step 360° rotating nose for maximum flexibility Narrow-shaped nose for easy reach in tight

spaces

Cable Tie Installation Tools

www.tnb.ca

Ty-Rap ®

C76

Fastening Products

Lightweight. Economical. Durable. Perfect for spot-tying!

They cinch up the tie with a squeeze action, and cut away the excess tail when twisted

180º. A specially designed pawl cuts away the tail if the tension limit is exceeded, thereby

preventing the cable tie from being over-tightened.

•Installs Ty-Rap®cable ties up to 0.301 in. wide by 0.080 in. thick

•Designed for use by both left- and right-handed operators

•Lightweight, high-impact polymer and steel components

Cat. No. Description Tie Body Width Std.

Pkg.

(in.) (mm)

Ty-Rap®Cable Tie Installation Tool — Light Duty

WT1-TB Cable Tie Installation Tool, 18–50 lb.(80–222.4 N) 0.09 - 0.18 2.39 - 4.67 1

WT2-TB Cable Tie Installation Tool, 50–120 lb.(222.4–533.8N) 0.18 - 0.301 4.67 - 7.65

Cuts tail off — flush

•Installs Ty-Rap®cable ties

•Rugged metallic construction

•Pistol-grip installation tool

•Easy tension adjustment

•Tensions and cuts tie tail off flush

Cat. No. Description Tie Body Width Std.

Pkg.

(in.) (mm)

Ty-Rap® Cable Ties Installation Tool — Metallic

WT193A Cable Tie Installation Tool,

18–50 lb. (80-222.4N) 0.09 - 0.18 2.39 - 4.67 1

Get the job done right!

•Installs Ty-Rap®stainless steel cable ties

•Rugged stainless steel construction

•Pistol-type installation tool

•Adjustable tension settings

Cat. No. Description Tie Body Width Std.

Pkg.

(in.) (mm)

Ty-Rap®Heavy-Duty Installation Tool — Stainless Steel

DAS250 Stainless Steel

Installation Tool 0.31 7.87 1

Easy tension adjustment!

•Installs Ty-Rap®cable ties

•Rugged metallic construction

•Pistol-grip installation tool

•Tensions and cut cable tie tail off flush

Cat. No. Description Tie Body Width Std.

Pkg.

(in.) (mm)

Ty-Rap®Heavy-Duty Installation Tool — Mil Spec Approved

WT199 Installation Tool, 18–50 lb.

(80–222.4N) 0.09 - 0.18 2.39 - 4.67

WT197 Installation Tool, 50–120 lb.

(222.4–533.8N) 0.18 - 0.30 4.67 - 7.65

Mil Spec Approved (WT199 — MS90387-1, WT197 — MS90387-2)

Cat. No. Description Tie Body Width Std.

Pkg.

(in.) (mm)

Ty-Rap®Installation Tool — Deltec & Stainless Steel

WT3D Deltec Installation Tool 0.18 - 0.50 4.67 - 12.70

WT3S Stainless Steel Installation Tool 0.50 12.70

Makes tie installation easy!

WT3D

•Installs both self-locking Ty-Rap® cable ties

and lashing ties

WT3S

•Installs stainless steel ties

Cable Tie Installation Tools

www.tnb.ca

Ty-Rap ®

C77

Fastening Products

A lightweight tool for least critical applications. Cinch tie to desired bundle and twist tool to

remove excess strap. Recommended for use with 18 - 50 pound ties.

Cat. No. Description

Tie Body

Width Std.

Pkg.

(in.)

Cable Tie Tool

QC-100 Cable Tie Tool, 18-50 lb. tension Plastic Handle 0.094 - 0.184 1

QC-100 (plastic)

L-200 Metal (steel)

L-300C Metal (steel)

L-400-C (plastic)

Economy tool for use with 18 - 50 pound ties. Automatic cut-off removes excess strap flush against cable tie head. Tool is

equipped with adjustable tensioning.

Cat. No. Description

Tie Body

Width Std.

Pkg.

(in.)

Cable Tie Tool

L-200 Cable Tie Tool, 18-50 lb. tension Steel Handle 0.094 - 0.184 1

Rugged construction makes this tool ideal for use with our 120 - 175 pound ties. Cinch tie to desired bundle and pull trigger

to cut excess flush at Cable Tie head. Field proven durability.

Cat. No. Description

Tie Body

Width Std.

Pkg.

(in.)

Cable Tie Tool

L-300C Cable Tie Tool, 120-175 lb. tension Steel Handle 0.301 - 0.345 1

Heavy Duty tool for use with 18 - 50 pound ties. Automatic cut-off and adjustable tensioning for dependable use in assembly

applications.

Cat. No. Description

Tie Body

Width Std.

Pkg.

(in.)

Cable Tie Tool

L-400C Cable Tie Tool, 18-50 lb. tension Plastic Handle 0.094 - 0.184 1

Cable Tie Installation Tools

www.tnb.ca

Ty-Rap ®

Head Office

19295 25th Avenue

Surrey, BC V3Z 3X1

Tel: 778-545-9916

Fax: 778-545-3099

Toll Free: 1-888-467-7626

Terrace

5000 Pohle Avenue

Terrace, BC V8G 4S8

Tel: 250-635-6379

Prince George

2255 S. Quinn Street

Prince George, BC V2N 2X4

Tel: 250-563-0575

Kitimat

622 Commercial Avenue

Kitimat, BC V8C 2C5

Tel: 250-632-3774

Fort Nelson

PO Box 3266 - 5016 48th Avenue

Fort Nelson, BC V0C 1R0

Tel: 250-233-8570

Dawson Creek

1101 97th Avenue

Dawson Creek, BC V1G 1N5

Tel: 250-782-4896

Williams Lake

527 S. MacKenzie Avenue

Williams Lake, BC V2G 1C8

Tel: 250-392-7795

Vernon

5203 24th Street

Vernon, BC V1T 8X7

Tel: 250-545-2191

Penticton

401 Okanagan Avenue

Penticton, BC V2A 3K1

Tel: 250-492-4032

Kamloops

B-983 Camosun Crescent

Kamloops, BC V2C 6G1

Tel: 250-374-3191

Cranbrook

Unit A #800 Industrial Road. #2

Cranbrook, BC V1C 4C9

Tel: 250-489-4591

Parksville

#105 - 425 E. Stanford Avenue

Parksville, BC V9P 2N4

Tel: 250-954-1797

Duncan

5286 Polkey Road

Duncan, BC V9L 6W3

Tel: 250-748-3377

Courtenay

2615 Moray Place

Courtenay, BC V9N 8A9

Tel: 250-334-0338

Campbell River

1030 B - 9th Avenue

Campbell River, BC V9W 4C2

Tel: 250-287-9265

Surrey

13055 80th Avenue

Surrey, BC V3W 3B1

Tel: 604-596-7111

Richmond

12360 Vickers Way

Richmond, BC V6V 1H9

Tel: 604-273-1981

Langley

#101 - 20550 Duncan Way

Langley, BC V3A 7A3

Tel: 604-533-1275

Burnaby

3935 2nd Avenue

Burnaby, BC V5C 3W9

Tel: 604-292-4800

Lighting Specialist

Tel: 778-545-9916

Projects Group

Tel: 604-596-7111

Data Communications Group

Tel: 778-545-9916

Process, Automation &

Controls Group

Tel: 778-545-9916

Unit 9, 7223 68 Avenue,

Edmonton, Alberta T6B 3T6

Thomas & Betts Ty Rap® Catamount® Fastening Products 1000450212 Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation