105319 Catalog
2014-09-04
: Pdf 105319-Catalog 105319-Catalog 622454 Batch7 unilog
Open the PDF directly: View PDF .
Page Count: 16
Download | |
Open PDF In Browser | View PDF |
Electrical Nonmetallic Tubing & Fittings E L E C T R I C A L S Y S T E M S ELECTRICAL NONMETALLIC TUBING & FITTINGS • Easy installation • Complete concrete-tight system • Approved fo r use in fire- rat ed f loor/c eiling a s s e m b l i e s We build tough products for tough environments ® KWIKON: AN INTEGRATED ENT SYSTEM THAT We designed Kwikon Electrical Nonmetallic Tubing (ENT), fittings, slab boxes and accessories with two goals. Firstly, we set out to create an integrated ENT system tough enough to meet the rugged day-to-day challenges of the construction industry. More importantly, we wanted to make a system that saves time and money on the job site. People who work with it daily insist we got it right on both counts. The best alternative to heavy and labor-intensive 10 ft. lengths of metal conduit, Kwikon was made for fast, easy installation, saving valuable man-hours on any construction site. As the toughest non-corroding, non-conducting ENT system on the market, its durability – even under tons of concrete – ensures years of reliable use for savings over the long run. Saving contractors time, money and worry, Kwikon is an integrated ENT system that makes sure the job gets done right. SAVES TIME & MONEY TUBING Light and flexible, Kwikon tubing comes with color-coded stripes for easy cable identification. Use Kwikon for communications (yellow), fire alarm and emergencies (red) and power (blue). FITTINGS Kwikon offers the industry’s most complete line of ENT fittings for all ENT sizes and transition needs – bridge gaps from ENT to EMT or to metallic slab boxes or to Rigid PVC. Made rugged and concrete-tight, our fittings require no solvent welding or tape, and can be joined to any UL-listed and CSA ENT. S L A B B OX E S Available in a variety of styles, Kwikon slab boxes are engineered tough and completely concrete-tight. No more stuffing boxes with paper to keep concrete out. FORM STUBBIES Kwikon stubbies are used to hold conduit ends firmly in place until concrete is poured and cured. They eliminate the need to drill holes in plywood forms, and they protect the ENT from possible breakage during the removal of wood forms after the concrete has set. ACCESSORIES To round out our fully integrated ENT system, Kwikon also provides a wide range of ENT wall boxes, ceiling boxes, plaster rings and covers for multiple applications. KWIKON: THE ENT SYSTEM CONTRACTORS D A P P L I CAT I O N S Since its introduction in 1986, Kwikon has been trusted by electricians, engineers, building owners and general contractors across North America. Thanks largely to its rugged reliability and quick, easy installation, Kwikon has established itself as the market leader. While metal was the industry’s material of choice in the past, Kwikon has proved itself a more versatile, flexible and affordable improvement. Coiled in long convenient reels, it’s simple and fast to measure, cut and fit—no special tools or training are needed. Kwikon’s corrugated construction is so flexible it can be bent easily by hand. And our patented Kwikon couplings and connectors, with their six locking tab design, provide an instant snap-on, lock-in fit that easily meets UL requirements for conduit pull-out. WA L L S Kwikon’s flexibility and ease of handling in metal, wood or block walls reduce the time and labor needed to install electrical raceways. What’s more, it comes backed by a national sales network of Kwikon specialists dedicated to making sure every job you do turns out right. No wonder so many contractors agree Kwikon is number one. INSLAB FLOORS With its concrete-tight design and easy-toinstall angled stubbies, Kwikon offers the perfect ENT solution for inslab floors. MARKETS ■ Residential (Low or High Rise) ■ Commercial (Low or High Rise) ■ Institutional (Prisons, Schools, Universities) ■ Hospitals and Nursing Homes (Only in nonpatient care areas) ■ Stadiums and Arenas FLOOR / CEILING ASSEMBLIES Kwikon’s light weight and versatility make it perfect for slab applications. Integrated with our slab boxes, Kwikon can be used to install lights and ceiling fans. A CLEAN CONNECTION Kwikon ENT Stubbies provide a clean 1-1/2" stub of ENT to make your connection while protecting the ENT from the traditional breakage that can occur when the forms are removed. EPEND ON C O D E S & S TA N DA R D S NEC, ARTICLE 362 Rules governing the installation of KWIKON ENT are described in the 2002 National Electrical Code, ANSI/NFPA Article 362. KWIKON ENT systems are recognized for use in places of assembly as referenced in Articles 518 and 520. KWIKON ENT may be installed and concealed in floors, walls, ceilings and suspended ceilings where a thermal barrier of material has a minimum of fifteen minute finish rating. KWIKON ENT may be installed and exposed in areas not subject to physical damage and where the building does not exceed three floors above grade [Section 362.10 (1)]. NOTE: KWIKON ENT may penetrate firerated walls, floors or ceilings with a ULlisted or recognized through-penetration fire-stop system. FIRE-RESISTIVE CONSTRUCTION A N D WA L L A S S E M B L I E S KWIKON ENT tubing, fittings and slab boxes are approved for use in noncombustible 2 hour and 4 hour fire-rated floor/ceiling assemblies. Normal weight concrete cover must be provided; a minimum of 2-1/8" for 2 hour assemblies and 2-3/8" for 4 hour assemblies. [ULI File: E 78276 and ULC File: R-19226]. Kwikon Electrical Nonmetallic Tubing and Kwikon fittings have been investigated for use in a non-load-bearing wall and partition assembly. The report (ULC CR2196) concludes the wall assemblies with Kwikon ENT and fittings will provide a 2 hour resistance to the passage of the flame and dangerous transmission of heat. [ULC File: CR1296 and UL File: E122659] KWIKON: TOUGHER THAN ANY OTHER ENT S As everyone knows, accidents happen…especially on construction sites. Workers trip, knock over equipment, drop tools. A good measure of an ENT’s strength is how it performs on the job site. Made of heavy-duty, impact-resistant PVC, Kwikon is tough enough to withstand the day-to-day bumps and knocks of any job site. As a result, Kwikon reduces costly construction site damage and saves money by reducing waste. Yet a bigger test of an ENT system’s strength is how it holds up to being encased in concrete. Kwikon is completely non-corroding and concrete-tight, ensuring years of rugged durability once encased in concrete or enclosed behind walls or ceilings. Kwikon’s strength saves you from the worry – and costs – of future repairs or maintenance. YS TEM ON THE MARKET S U I TA B L E F O R C O N C R E T E E N CA S E M E N T Every contractor’s worst nightmare is a product that doesn’t work or hold up in poured concrete; the costs of replacement and repair can be tremendous. Every Kwikon product is designed for concrete encasement, requiring no solvent welding or tape around the connections, or paper stuffed inside. P U L L R E S I S TA N T Once a length of Kwikon tubing is connected to a coupling or connector, it stays connected, thanks to our unique six locking tab design. With a pull-out resistance of up to 175 lbs., our patented snap-on, lock-in system provides a seal that easily meets UL requirements for conduit pull-out. F I R E R E S I S TA N T Kwikon ENT tubing, fittings and slab boxes are approved for use in noncombustible 2 hour and 4 hour fire-rated floor/ceiling assemblies. I M PA C T R E S I S TA N T Strong, solid fittings meeting all UL requirements Patented “six locking tab” design creates a strong, pull-out resistant and concrete tight seal Flexible enough to be bent by hand, yet tough enough to withstand crushing and breaking Kwikon ENT is made of impact resistant PVC, so it won’t break or crack if an object is dropped on it or someone steps on it. KWIKON: FASTER AND EASIER TO INSTALL T With its convenient coil and reel lengths of up to 1500 ft. and snap-on fittings, Kwikon uses fewer couplings over long spans than metal conduit and eliminates the need for time-intensive set-screw couplings. And compared to other conduit systems, connecting Kwikon ENT to a Kwikon slab box is as quick and easy as fitting tubing into a coupling—it’s a snap! Unlike metal conduit which has to be cut and bent, using specialized equipment, to navigate turns and corners, Kwikon can be bent and twisted by hand, saving hours of construction site time. When it does have to be cut, no special tools or equipment are needed—a standard hack saw will get the job done, but we recommend our Kwikon ENT cutter for clean square cuts. Its lightweight and fast, easy installation, even in cramped narrow spaces, make Kwikon the number one choice for commercial, industrial, institutional and residential construction. Color-coded stripes permit system designation and make cable identification easy. Aligned hub entries allow for easy cable pull-through Kwikon slab boxes are completely concrete-tight Click-together locking tabs make connecting ENT a snap! HAN EMT I N S TA L L I N G K W I KO N I S T H I S E A S Y 1 U N RO L L K W I KO N TO DESIRED LENGTH Available in convenient coil and reel lengths up to 1,500 ft.,Kwikon gives you the flexibility to measure out exactly the amount of tubing you need. Kwikon requires fewer couplings for long spans than metal conduit. It’s recommended ENT be securely fastened at 2 – 3 ft. intervals. 2 C U T K W I KO N W I T H AN ENT CUTTER For straight cuts every time use the Kwikon scissor-style cutting tool. However, no special tools or cutting equipment are necessary. Kwikon can even be cut with a standard utility knife. 3 MAKE BENDS AND TURNS BY HAND Unlike metal which has to be cut to fit tight spaces, Kwikon can be bent, turned and manipulated by hand to wind around irregular curves and corners. When bending, ensure the radius of the curve is at least six times the diameter of the tubing. 4 S I M P LY S N A P C O N N E C T I O N S TO G E T H E R With no special tools or equipment needed, Kwikon’s unique snap-on fittings quickly and easily join or terminate ENT and provide a concrete-tight connection. 5 P U L L CA B L E T H RO U G H K W I KO N Kwikon’s interior corrugated surface significantly reduces the amount of friction when pulling cables through long runs, even in runs with 90o bends. With Kwikon, you can pull longer runs of cable without worrying about damage. PRODUCT CATALOG ENT TUBING Kwikon ENT Coils – Blue Stripe Kwikon ENT Reels – Blue Stripe Size (inches) ID (inches) OD (inches) Length (feet) Product Code Size (inches) ID (inches) OD (inches) Length (feet) Product Code 1/2 0.574 0.840 200 012031 1/2 0.574 0.840 1500 012002 3/4 0.778 1.050 100 012040 3/4 0.778 1.050 1000 012011 1 1.000 1.315 100 012041 1 1.000 1.315 750 012021 1-1/4 1.340 1.660 500 012046 1-1/4 1.340 1.660 1000 012047 1-1/2 1.610 1.900 300 012032 1-1/2 1.610 1.900 750 012033 2 2.020 2.375 225 012043 2 2.020 2.375 500 012044 Kwikon ENT Reels – Color Coded Kwikon ENT 10’ Sticks – Blue Stripe Size (inches) Length (feet) Product Code Crate Size Size (inches) Length (feet) Product Code Red Yellow 1/2 10 012001 3600 1/2 1500 012305 012335 3/4 10 012010 2200 3/4 1000 012307 012337 1 10 012034 1800 1 750 012310 012340 NOTE: 1-1/4", 1-1/2", 2 " red and yellow stripe ENT is available by special order. Storage of Kwikon ENT Tubing Manufacturer recommends that ENT tubing should not be stored outdoors where subjected to direct sunlight without protective covering, i.e. packaging or tarps. ENT SUPPORT UNIT (ESU) NEW Part Number Product Code ESU-10-35 089149 DESCRIPTION The new ENT Support Unit (ESU) is designed to raise the tubing or conduit up off the concrete form during the concrete pour maintaining a level raceway. With its minimal surface contact, the ESU allows for maximum aggregate flow and concrete consolidation. Easy to use, the ESU snaps around any size of ENT. It is perfect for use in high rise buildings constructed with post-tensioned (PT) concrete slabs. FEATURES ■ One size fits all 1/2" - 2" ■ Saves time and labor ■ Easy locking mechanism ■ Securable to the concrete form ■ Minimal footprint reduces amount of surface contact K W I KO N F I T T I N G S Kwikon Couplings Size (inches) Kwikon Connectors* Part Number Product Code Size (inches) Part Number Product Code 1/2 KC10 089000 1/2 KTA10 089006 3/4 KC15 089001 3/4 KTA15 089007 1 KC20 089002 1 KTA20 089008 1-1/4 KC25 189670 1-1/4 KTA25 189680 1-1/2 KC30 189671 1-1/2 KTA30 189681 2 KC35 189672 2 KTA35 189682 *KTA connectors are supplied with locknuts. Kwikon Snap-in Connectors Kwikon Transition Couplings Size (inches) Part Number Product Code Size (inches) Part Number Product Code 1/2 KTS10 089146 1/2 KTC10 089012 3/4 KTS15 089147 3/4 KTC15 089013 1 KTS20 089148 1 KTC20 089014 KWIKON ENT STUB DOWN FITTINGS Kwikon (KT90) Stub Down Fittings (Kwikon x Threaded) Size (inches) Part Number Product Code 1/2 KT90-10 089060 3/4 KT90-15 089059 1 KT90-20 089058 Kwikon (KK90) Stub Down Fittings (Kwikon x Kwikon) Size (inches) Part Number Product Code 1/2 KK90-10 089055 3/4 KK90-15 089056 1 KK90-20 089057 DESCRIPTION Both styles of stub down fittings are designed for direct connection to ENT on the horizontal by means of our patented six locking tab for concrete encasement Kwikon connection. The flanged base of the threaded 90º stub down offers contractors a NPSC threaded hub connection on the vertical – at the exit point of the slab, allowing for the direct transition to other raceway products. With our unique Kwikon x Kwikon stub down fitting, the user creates a stub down of ENT without penetrating the form. After the concrete pour the permanently encased fitting will be flush with the bottom of the slab deck, ready to accept the connection of ENT raceway. Designed to offer the optimal balance of bend radius and overall height in the slab, these fittings provide a bend radius of 2-1/2" while standing less than 3-3/8" tall. PRODUCT CATALOG KWIKON STANDARD SLAB BOXES Kwikon Slab Boxes with Molded Connectors – Volume 44 cu in. Size (inches) Part Number Product Code 8 x 1/2 SMB-H-10 089465 8 x 3/4 SMB-H-15 089462 4 x 1/2, 4 x 3/4 SMB-H-10/15 089458 4 x 1/2, 2 x 3/4 , 2 x 1 SMB-H-10/20 089466 4 x 3/4 , 4 x 1 SMB-H-15/20 089464 FEATURES ■ Approved for support of ceiling fans up to 35 lbs. and luminaries up to 50 lbs. ■ Concrete-tight. ■ All molded connectors have 360° locking tabs that exceed UL and CSA requirements for pull-out. ■ Manufactured from high-impact PVC. ■ Nonmetallic/non-conducting/ non-corroding. Kwikon Slab Boxes with Knockouts (without Molded Connectors) – Volume 44 cu in. Size (inches) Part Number ■ Product Code Threaded brass inserts. (10/32 for ceiling fans, 8/32 for luminaries). ■ Supplied as a fully assembled one piece unit. ■ A polyester film sealing the box opening to prevent possible infiltration during the our. 8 x 1/2 SMB-10 089460 4 x 1/2, 2 x 3/4 , 2 x 1 SMB-10/20 089461 KWIKON SHALLOW SLAB BOXES Kwikon Shallow Slab Boxes with Molded Connectors – Volume 36 cu in. Size (inches) Part Number Product Code 8 x 1/2 SMBS-H-10 089480 8 x 3/4 SMBS-H-15 089482 4 x 1/2, 4 x 3/4 SMBS-H-10/15 089481 4 x 1/2, 2 x 3/4 , 2 x 1 SMBS-H-10/20 089483 4 x 3/4 , 4 x 1 SMBS-H-15/20 089484 Kwikon Shallow Slab Boxes with Knockouts FEATURES ■ Threaded brass inserts (10/32 for ceiling fans, 8/32 for luminaires). ■ Approval for support of ceiling fans up to 35 lbs and luminaires up to 50 lbs. ■ Overall height of box (2-7/8") allows for use in thinner slabs. ■ A polyester film sealing the box opening to prevent possible infiltration during the pour. (without Molded Connectors) – Volume 36 cu in. Size (inches) Part Number Product Code 8 x 1/2 SMBS-10 089490 4 x 1/2, 2 x 3/4 , 2 x 1 SMBS-10/20 089491 FEATURES KWIKON SQUARE SLAB BOXES Kwikon Shallow Slab Boxes with Molded Connectors – Volume 44 cu in. Size (inches) Part Number Product Code 8 x 1/2 SSBH-10 089467 8 x 3/4 SSBH-15 089468 4 x 1/2, 4 x 3/4 SSBH-10/15 089469 4 x 1/2, 2 x 3/4 , 2 x 1 SSBH-10/20 089474 4 x 3/4 , 4 x 1 SSBH-15/20 089475 ■ Direct mounting of 4" square covers and plaster rings. ■ Mounting feet are located on corners for quicker positioning and securing to form. ■ Standard dimension 2-gang cover plates cover all exposed surfaces. ■ A polyester film sealing the box opening to prevent possible infiltration during the pour. S L A B B OX E S KWIKON SLAB BOX ASSEMBLY FOR USE WITH PLASTER RINGS Kwikon Slab Boxes with Molded Connectors Size (inches) Part Number Product Code 8 x 1/2 MBH-10 089022 8 x 3/4 MBH-15 089018 4 x 1/2, 4 x 3/4 MBH-10/15 089020 4 x 1/2, 2 x 3/4 , 2 x 1 MBH-10/20 089019 4 x 3/4 , 4 x 1 MBH-15/20 089021 FEATURES ■ Approved for support of ceiling fans up to 35 lbs. and luminaries up to 50 lbs. ■ Slab box assemblies are supplied without the collar - ready to accept the desired raised cover/plaster ring. ■ Plaster rings mount directly to the box opening using the screws supplied. ■ Used with raised covers, boxes are perfect for use in shear wall or block construction for wall mounted fixtures and devices. Kwikon Slab Boxes with Knockouts Size (inches) Part Number Product Code 8 x 1/2 MB-10 089017 4 x 1/2, 2 x 3/4 , 2 x 1 MB-10/20 089016 KWIKON CONCRETE WALL BOXES 3-1/2" Deep Boxes Size (inches) Part Number Product Code 4 x 1/2, 4 x 3/4 SVDB-H-10/15 089496 4 x 3/4, 4 x 1 SVDB-H-15/20 089049 4 x 1/2, 2 x 3/4, 2 x 1 SVDB-H-10/20 089052 8 x 3/4 SVDB-H-15 089065 Size (inches) Part Number Product Code 4 x 1/2 SVSB-H-10 089054 4 x 3/4 SVSB-H-15 089053 NEW FEATURES ■ Fully assembled and installation ready ■ Perfectly suited for deep or shallow construction preferences ■ Kwikon hubs do not protrude inside the box ■ Concrete-tight poly film covering the box opening 2" Shallow Boxes KWIKON SLAB BOX EXTENSION RING Adjusts height of SMB/SMBH series slab boxes by 1" Part Number Product Code SMBR 089494 EXTENSION RING FEATURES ■ Easily installed. ■ Quickly adjusts to new height. PRODUCT CATALOG ENT FORM STUBBIES KWIKON ENT FORM STUBBIES Size (inches) Part Number Product Code 1/2 KSTB-10 089330 3/4 KSTB-15 089331 1 KSTB-20 089332 1-1/4 KSTB-25 089333 DESCRIPTION Ease and convenience were a priority in the design of Kwikon ENT form stubbies. Contractors use our stubbies to create conduit stub-downs in concrete without needing to drill holes in the plywood form. Available in the original stubby design, the angled version and the Multi-Link, Kwikon form stubbies also protect the ENT from potential damage during the removal of wood forms. KWIKON ENT ANGLED FORM STUBBIES Size (inches) Part Number Product Code 1/2 KASTB-10 089233 3/4 KASTB-15 089234 1 KASTB-20 089235 1-1/4 KASTB-25 089236 1-1/2 KASTB-30 089238 The angled stubby gives you the advantage of positioning the ENT at a lower profile within the slab. It’s available in all sizes of ENT up to 1-1/2". The Multi-Link form stubby is designed in convenient rows of three and feature a snap-together design which enables them to be configured in a variety of tightly grouped formations. It also features a thin removable film over the drop opening that prevents concrete slurry from seeping under the stubby during the concrete pour. KWIKON ENT MULTI-LINK FORM STUBBIES Size (inches) Part Number Product Code 1/2 MSTB-10 089031 3/4 MSTB-15 089026 1 MSTB-20 089025 ACCESSORIES ENT WALL BOXES, CEILING BOXES, PLASTER RINGS & COVERS CUTTING TOOL Part Number Product Code Cutting Tool 1/2" – 1" CLC20 088210 089507 Cutting Tool 1/2" – 2" CLC35 088915 Replacement Blade for CLC20 SSB 088211 Replacement Blade for CLC35 SB35 088916 Description Part Number Product Code Description Ceiling Box 2-1/16" Deep KCB-10 089506 KDCB-10/15 4" Set-Up Box 2-1/16" Deep Switch Box 3-1/16" Deep KSB-10/15 089508 4" Square Box 1-1/2" Deep KDSB-2-10 089509 4" Square Box 2-1/8" Deep KDSB-2-10/15 089510 Raised 1/2" Single Device KRC-10 089501 Raised 5/8" Single Device KRC-15 089502 Raised 1/2" Two Devices KRCD-2-10 089503 Raised 5/8" Two Devices KRCD-2-15 089504 Round Flat Cover, 1/2" KO KFC-10 089505 Square Flat Cover, 1/2" KO KWBC-10 089500 KVP 089512 Voltage Partition KCB-10 KDCB-10/15 KRC-15 KDSB-2-10 KSB-10/15 KRC-10 KFC-10 KWBC-10 KDSB-2-10/15 KRCD-2-10 KRCD-2-15 KVP SUGGESTED SPECIFICATI0NS Section 16110 Electrical Raceway Systems PART 1: GENERAL 1.1 REFERENCES A.Standards referred to in this section are: 1. UL 1653 Electrical Nonmetallic Tubing. 2. NEMA TC-13 Electrical Nonmetallic Tubing. PART 2: PRODUCTS 2.1 MANUFACTURERS A. Acceptable manufacturers are listed below 1. Electrical Nonmetallic Tubing: a. Kwikon by IPEX 2. Electrical Nonmetallic Tubing Fittings: a. Kwikon by IPEX 3. Electrical Nonmetallic Tubing Boxes: a. Kwikon by IPEX B. All ENT tubing, ENT fittings, ENT boxes and accessories shall be manufactured by the same company so as to form a complete ENT system. C. ENT systems shall be approved for use in fire resistance rated concrete floor-ceiling assemblies with fire resistance ratings up to 4 hours. 2.2 RACEWAYS A. ENT raceway shall be color coded to indicate the wiring system. Blue stripe for power, red stripe for fire alarm/emergency systems and yellow stripe for data/communications. B. ENT raceway shall be listed to UL1653 and manufactured in accordance with NEMA TC-13. PART 3: INSTALLATION 3.1 INSTALLATION A. ENT raceways, fittings, boxes and accessories shall be installed in accordance with Article 362 of the 2002 National Electrical Code. B. Where ENT penetrates a fire-rated wall, floor or ceiling assembly, an approved firestop system as listed in Underwriters Laboratories Building Materials Directory or other nationally recognized testing laboratory shall be used. 2.3 FITTINGS A. ENT Fittings shall be manufactured of high-impact PVC B. ENT Fittings shall meet the following requirements: 1. Six locking tabs located every 60o providing 360o contact. 2. Locking tabs shall provide a conduit pull-out of a minimum 175 ft-lb force. 3. Concrete-tight without the need for taping. 4. When transitioning to EMT conduit, the transition fitting shall have six locking tabs for ENT connection and set-screw connection for EMT. 2.4 BOXES A. ENT boxes shall be manufactured of high-impact PVC B. ENT Slab Box and Wall Box requirements: 1. Slab Boxes shall be approved for the purpose and concrete-tight. 2. Round Slab Boxes shall be approved for use with luminaires up to 50 lbs and ceiling fans up to 35 lbs. 3. Round Slab Boxes shall have threaded brass inserts for the attachment of luminaires or ceiling fans. 4. Slab Boxes shall have eight (8) integrally molded ENT hub connectors with six locking tabs for ENT raceway connection. CUSTOMER SERVICE CENTER U.S. Customers call IPEX USA LLC Toll free: (800) 463-9572 w w w. i p e x a m e r i c a . c o m About the IPEX Group of Companies As leading suppliers of thermoplastic piping systems, the IPEX Group of Companies provides our customers with some of the world’s largest and most comprehensive product lines. All IPEX products are backed by more than 50 years of experience. With state-of-the-art manufacturing facilities and distribution centers across North America, we have established a reputation for product innovation, quality, end-user focus and performance. Markets served by IPEX group products are: • Electrical systems • Telecommunications and utility piping systems • PVC, CPVC, PP, ABS, PEX, FR-PVDF and PE pipe and fittings (1/4" to 48") • Industrial process piping systems • Municipal pressure and gravity piping systems • Plumbing and mechanical piping systems • PE Electrofusion systems for gas and water • Industrial, plumbing and electrical cements • Irrigation systems Products are manufactured by IPEX Electrical Inc. and distributed in the United States by IPEX USA LLC. Kwikon® is a trademark of IPEX Branding Inc. This literature is published in good faith and is believed to be reliable. However, it does not represent and/or warrant in any manner the information and suggestions contained in this brochure. Data presented is the result of laboratory tests and field experience. A policy of ongoing product improvement is maintained. This may result in modifications of features and/or specifications without notice. BRELKKIP090905R © 2009 IPEX EL0027U
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2009:09:22 12:18:09-04:00 Modify Date : 2009:11:27 12:12:40-05:00 Metadata Date : 2009:11:27 12:12:40-05:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:800c114a-aee3-499f-a997-f3e67bc6731c Instance ID : uuid:6859bdf5-3f9a-4cdc-93d5-03cae81e98e4 Has XFA : No Page Count : 16EXIF Metadata provided by EXIF.tools