119401 Catalog
103308-Catalog 103308-Catalog 103308-Catalog 781747 Batch7 unilog cesco-content
355932-Catalog 355932-Catalog 355932-Catalog Batch9 unilog cesco-content
2014-07-29
: Pdf 119401-Catalog 119401-Catalog 781747 Batch6 unilog
Open the PDF directly: View PDF .
Page Count: 296
Download | |
Open PDF In Browser | View PDF |
2011 PRO DUCT CATALOG Rigid/IMC Conduit Bodies Rigid/IMC Conduit Fittings Red Fire Alarm Boxes & Fittings EMT Fittings EMT Conduit Bodies Liquid Tight Fittings Portable Cord Connectors Flexible Metal Conduit Fittings Armored/Metal Clad Cable Fittings Transition Fittings Nonmetallic Cable Fittings Grounding Products Clamps and Hangers Service Entrance Voice/Data/Video Wherever Opportunities take you… Hazardous Location Specialty Products Technical Guide www.bptfittings.com …Take Bridgeport for better results. There is no shortcut to quality. But there is a surefire route to making more out of every opportunity: Take along Bridgeport products, service, support and Lower Total Cost. Bridgeport engineers, field technical resources and network of manufacturer representatives are ready to help you with virtually any application. From industrial to education, retail and energy, Bridgeport has a complete line of products that install faster, safer, more securely and more cost effectively. You don’t need to travel half way around the globe to meet the people behind Bridgeport products. Our factory in Stratford, Connecticut still manufactures most of the fittings we sell. So you get American quality, reliability and innovation every time you choose Bridgeport. NEW PRODUCT DIRECTION 733-PS Patented, innovative product for physical protection of nonmetallic sheath cable 4157-DC Patented transition coupling for joining duplex AC/MC to EMT BJ-100 Patented low cost steel expansion couplings and bonding jumpers EC-100 Patented low voltage device holders for new work. For use on wood or steel stud with 1/2" or 3/4" EMT NMLV-200B Patented 90° PVC jacketed MC and TECK cable connectors 895-DC2 TABLE OF CONTENTS Index by Catalog Number xxxii - xli General Notes & Product Standards xIii Rigid/IMC Conduit Bodies 2 - 13 Rigid/IMC Conduit Fittings 14 - 37 Red Fire Alarm Boxes & Fittings 38 - 39 EMT Fittings 40 - 66 EMT Conduit Bodies 67 - 72 Liquid Tight Fittings 73 - 81 Portable Cord Connectors 82 - 90 Flexible Metal Conduit Fittings 91 - 111 Armored/Metal Clad Cable Fittings 112 - 139 Transition Fittings 140 - 143 Nonmetallic Cable Fittings 144 - 152 Grounding Products 153 - 160 Clamps and Hangers 161 - 163 Service Entrance 164 - 177 Voice/Data/Video 178 - 186 Hazardous Location 187 - 203 Specialty Products 204 - 213 Technical Guide 214 - 249 iii Your Roadmap to Lower Total Cost What are you really paying for your fittings? Whatever it is, Bridgeport can cost you less. Because we engineered our products, production, delivery and support to drive Lower Total Cost. Think about it. The true total cost of a product includes the costs of availability, time-to-delivery, trouble-free installation, service and support, and the quality that ensures a defect-free product. e Trouble-Fre Installation All fittings are not created equal. Inferior products that may appear to save you a few pennies can actually cost you dollars more – because they cost more to install. In fact, product design, manufacturing and packaging shortfalls lead to higher install costs that drain the profitability out of projects every day. Just ask any contractor who has opened a carton of fittings and found missing screws, cross-threaded locknuts, or poorly produced products that fall apart. Buying a cheap product is a costly mistake when inferior quality, inconsistency in manufacturing, missing parts, and installation difficulty results in higher installed cost. Bridgeport cares about the details. Fittings are not commodities to us. Our customers tell us it’s the “little things” that make a big difference – little things that ensure trouble-free installation and lower installed cost every time. We don’t take anything for granted, and neither should you: Packaging – sounds simple, but how often does a carton fall apart on the job site due to the weight of the contents? Bridgeport is known for its field-tough packaging that ensures integrity during transport to or movement on the job. No Loose Components – products stay assembled in the carton so you don’t have to search for components or throw away incomplete parts. iv When you consider these true costs, Bridgeport Fittings is your Lower Total Cost solution. Whether you are a contractor, facilities manager, specifier, engineer, or electrical distributor, these are the cost considerations that should be important to you. With Bridgeport, you are assured of both Lower Total Cost and Higher Total Quality. Captive Screws – held securely so they do not come loose and engaged flush with the fitting body internal dimension – for a quick installation without backing the screw out prior to usage. Deep-Slot, Tri-Drive Screws – reduce slippage during tightening and provide maximum flexibility for Phillips, Straight Blade or Robertson square drivers. Quality, Durable Product – zinc die cast fittings manufactured with the highest-grade zinc alloys, specifically formulated for strong and consistent castings. Product that won’t get brittle and crack no matter how long ago they were manufactured. Zinc Locknuts – perfectly matched to the fittings, with two full-cut threads so the locknut won’t jump the connector threads when fully tightened. Reversible and fast threading with a single spin of the nut to promote a trouble-free, time-saving installation. Serrated design provides for increased continuity, and extra tightening lugs are accessible from all angles. Labor Saving, Quick-Install Products – designed for a trouble-free, time-saving installation, the first time, every time. Products that drive your costs down. v At Bridgeport, we’re constantly thinking of ways to help contractors do their jobs better and more efficiently. We’re developing a steady stream of new and innovative products that are designed to save time and money. Bridgeport innovations drive Lower Total Cost with laborsaving, quick-install products, time-saving transitional fittings and better-designed traditional fittings. It’s all smarter thinking from Bridgeport, outside or inside the box: Quick Install Products – from our patented simple Whipper-Snap® connectors, to our unique patented singlescrew AC/MC or NM cable connectors. Innovative & Unique Problem Solving Products – from our patented low-voltage device holders and cable stackers, to patented colored EMT steel fittings, to the patented protector strip for physical protection of nonmetallic sheath cables in minimum depth walls, to the USL120 set screw connector for use with extra flexible steel conduit. vi Product Innovation Raintight Fittings Solutions – from our new patented three-piece UL Listed Raintight couplings for rigid conduit, to our patented Raintight jacketed metal clad (JMC) cable connectors, to our patented zinc die cast Raintight EMT fittings. Transitional Fittings Solutions – from our patented 4157-DC combination coupling used to join duplex 14/2 to 10/3 AC/MC to ¾” EMT, to our 4360-DC used to join liquid tight conduit to EMT. Cost Effective Fitting Solutions – from our patented quick install steel expansion fittings, to our E-Z Lock® steel connectors. OEM/Customer Specification Solutions – from our 543-DC flanged 90° motor panel connector to our other OEM specific product solutions. Traditional, Industry Leading Fittings – from our unique zinc die cast locknuts to the industry’s best EMT zinc die cast fittings. vii Brand preference and recognition are a direct result of industry-leading quality. You know quality when you see it. We know quality because we build it. And our quality drives Lower Total Cost through troublefree installations. What’s behind Bridgeport’s legendary product quality? Proactive Process Control – the best manufacturing preventative maintenance systems prevent problems and poor quality. Process Monitoring – controls process parameters to ensure quality die cast parts every time. Zinc components are X-rayed daily to ensure process controls are functioning properly. Stamping dies are electronically monitored to ensure quality stampings and zinc plating thickness is electronically monitored to ensure maximum corrosion protection. viii Legendary Quality Visual Electronic Pattern Recognition – and other sensing systems ensure consistent adherence to standards and specifications during our automated assembly process. Stringent Material Standards & Specifications – certification of every raw material guarantees adherence to applicable specifications and is augmented by additional internal and third-party conformance testing. Total Employee Commitment to Quality – the passion, the dedication and the knowledge of generations that demonstrate the ultimate stop-gap to poor quality. The key to making any quality product is to expertly control the materials, dimensions, and tolerance of every component involved. Our advanced inspection techniques and manufacturing processes ensure absolute quality and reliability – attributes expertly built into every product. ix Consistent and reliable delivery, faster decision making and responsiveness – these are the cornerstones of our service and customer satisfaction commitment. Bridgeport service drives Lower Total Costs by having the right product and support where and when you need it. Product Availability and Speed-of-Delivery – Our distributors rely on our ninety-seven percent plus order fill rates and our speed of delivery. Our contractors and enduser customers rely on our diverse and stable distribution base with ready access to inventory. Local Support – our premier network of manufacturers’ representatives gives you local management and decision making, day-in and day-out consistency and a high degree of integrity and trust. A strong local presence, commitment and expertise, backed by field and factory-based technical personnel support your every need. Single-Source, One-Stop Shopping – while we are proud to be the market leader for zinc die cast fittings, we also give you more conduit and cable fittings in malleable iron, steel, aluminum, brass/bronze, and nonmetallic. It’s a product portfolio with the breadth and depth to meet your every need. Customer-Centric Decision Making – we focus on the value we bring to your business – speed of responseservice-delivery, and labor-saving products. As a familyowned business, we rely on customer-focused decision making instead of shareholder-focused numbers making. x Service Consisten cy Fast Service & Response – Bridgeport is an actionoriented company – our people don’t just deliver, they serve. Whether it’s full-line selection, fast decision making, ease of doing business, or access to top management, you can trust us to be on top of things. Your Success Is In Our DNA Trouble-free installation, product and packaging quality, service excellence, ease of doing business, product innovation, and customer-centric decision making – they’re the Bridgeport DNA building blocks that drive everything we do to serve you better. The next time you are ready to purchase fittings, think of Bridgeport, and think Lower Total Cost and Higher Total Quality. xi xii A Winning Product Formula In 2006 Bridgeport Fittings, Inc. announced the purchase of certain assets of Regal Manufacturing, including the Regal Manufacturing name, all rights to the use of the Regal name, patents, drawings, trade marks, part numbers, third party listings, domain names, and tools and dies associated with the manufacture of Regal products. Bridgeport also acquired specific assembly and production equipment associated with the manufacture of Regal products. The acquisition of specific assets of Regal, and the purchase of the Regal brand name, further strengthens Bridgeport’s market position within the electrical industry and reconfirms the company’s commitment to be the best in category manufacturer to the industry. Both Regal and Bridgeport businesses have been based on a tradition of quality products, delivery, and customer intimacy. Both companies were built on strong values, have strong brand recognition and brand preference. The Regal name will continue to thrive under the Bridgeport banner. xiii Why Does Bridgeport Use Specific Zinc Alloys? The basic raw material from which most Bridgeport cable and conduit fittings are manufactured is a zinc die casting alloy which is closely controlled by specification, certification, and outside analysis. Zinc Alloy Specifications The basic specifications of Bridgeport’s zinc alloys are found in ASTM B86. These primary alloys, designated as ZAMAK 7, ZAMAK 3, or ZA-12, are expressly specified by Bridgeport. We only use the highest purity zinc alloys to ensure the highest quality castings. (See Appendix VI) The functional advantages of these particular alloys and their purity include increased dimensional stability and reduced inter-crystalline oxidation in our finished castings. In simple terms, it means that Bridgeport’s fittings can adhere to tighter tolerances, and won’t get brittle and crack no matter how long ago they were manufactured. xiv Material Certifications The certification of every delivery of alloy or raw material received by Bridgeport guarantees that all material used conforms to the required specification. (See Appendix V) In the case of our zinc alloys, these certifications are made by our vendor in accordance with ASTM B86. Each batch is chemically analyzed using Emission Spectrochemical Analysis, and reported by the vendor’s laboratory on a certification document that accompanies each delivery. These certifications are legal documents that warrant the chemical composition of the zinc alloy and ultimately help guarantee the quality of Bridgeport’s zinc castings. We also require certifications for other raw materials which are used in listed product. An example is UL Listed plastic components must be certified to pass the UL94V Flammability Specification Test. These certifications are examined at several points before a delivery is accepted. Receiving, Quality Control, Die Casting, Purchasing, and Accounts Payable personnel all review the certifications. xv STEEL vs. ZINC? Steel has been used for years in the manufacture of many electrical products. Why would the best fittings not be made of steel? The answer lies in the performance requirements of conduit fittings. These standards are specified in UL 514B, and are based on the National Electrical Code. A properly designed and manufactured zinc alloy fitting can exceed the requirements of UL 514B, and offer several functional advantages besides a savings in installation cost. The perception that steel fittings will outperform similar type fittings manufactured from die cast zinc is untrue. In fact, just the opposite may be true. During the listing process at Underwriters Laboratories, ALL fittings, regardless of material, are tested to the same stringent UL 514B standard to comply with application requirements of the National Electrical Code. For example, ALL EMT connectors are subjected to the following tests: • Method of assembly • Screw torque test (set screw type) or Hex nut torque test (compression type) • Metallic coating thickness test (steel only) ConcreteTightness test (set screw type or compression type) or Rain-Tight test (compression type) • Bend test and Pull test • Electrical Resistance test • Ground Fault current test • EMT deformation test (set screw type only) The same parameter test values are used throughout the UL testing procedure regardless of material. Some functional tests include set screw torque of 35 in-lbs. xvi (160 in-lbs. for hex head screw), compression nut torque of 175 in-lbs. (1”) to 1600 in-lbs. (2” and up), conduit pull test of 300 lbs. (1”) to 1000 lbs. (2” and up), and current test of 1180 amperes for 4 seconds (1”) to 5050 amperes for 9 seconds (3” and up). In addition to similar performance characteristics, zinc die cast fittings are accepted by Federal Specifications A-A-50553, A-A-50552, A-A-50563, and ANSI/NEMA FB 1. Primary Benefits Of Die Cast Zinc Fittings 1. DIMENSIONAL CONSISTENCY Perhaps the most important advantage is that of dimensional consistency. The high quality zinc alloys Bridgeport uses are unique in their ability to hold very close tolerances in our properly designed dies. A maximum variation of +/.002” in a particular dimension from one casting to another is not unusual. Long-term consistency of this kind is difficult to achieve in steel. 2. CORROSION PROTECTION An important advantage of zinc alloys over steel is its inherent corrosion protection. The NEC requires that all ferrous metal surfaces be protected with a coating, typically zinc plating. Zinc alloy fittings do not need protective coating because the protection goes all the way through. The corrosion resistance of Bridgeport’s fittings is enhanced by a burnishing process, which is applied to each cast component immediately after the casting and trimming process. Burnishing closes the surface porosity, and gives Bridgeport’s fittings their characteristic shine. 3. FUNCTIONAL ADVANTAGES One of the most noted advantages of zinc fittings is with their ease of assembly with a locknut. Threading a zinc locknut onto a zinc connector is much easier than with the same assembly in steel. The reason lies in zinc’s inherent surface smoothness and lubricity not found in steel or zincplated steel fittings. The result is a locknut that can easily be threaded onto a connector by feel and with little effort. One other functional advantage is the reduction in weight vs. a steel fitting. Pound for pound, die cast zinc is about 16% lighter than cold rolled steel. This translates into easier handling of inventory. xvii Bridgeport’s Quality Control Bridgeport uses only carefully selected high-grade raw materials – steel, malleable iron, aluminum or zinc – to meet the high standards of the company’s manufacturing process. In addition, all purchased component parts must meet or exceed Bridgeport’s engineering specifications and drawings. By adhering to these quality standards, Bridgeport can deliver the easy-to-install products that customers expect. At Bridgeport, advanced inspection techniques are used to ensure the absolute quality and reliability that is built into every electrical product. Inspection begins with the receipt of purchased material and includes scheduled testing by trained inspectors, as well as continuous in-process inspection by assemblers and machine operators. This critical process safeguards consistency in manufacturing. Bridgeport’s quality control system is based on MIL-Q9858, and the inspection system is based on MIL-I-45208. Our goal is to have less than a 1% defect rate. We constantly monitor our internal manufacturing processes with regular inspections, including first and last piece, as well as in-process inspections. Our quality teams meets daily and weekly to discuss and rectify issues that result in non-conforming product. We track and monitor these production issues and ensure they are addressed. The end result is unsurpassed quality and value to our customers. The key to making any quality product is to expertly control the materials, dimensions, and tolerances of every component involved. While we manufacture as much as possible in-house, some components are ultimately purchased from outside vendors. We find that vendors will often suggest ways to cut corners and save money. These suggestions are almost always rejected by Bridgeport, since the only primary design considerations are function and quality. xviii Economic considerations are met by the volume resulting from the demand for our high quality product priced at a reasonable level. In addition, Bridgeport minimizes the variable effect of outside sources by producing its own components whenever possible. Such items as fitting covers, locknuts, and compression rings are produced under the careful control of the same Bridgeport engineers who produce the castings. The result is a line of fittings that function perfectly together. Product Features Spotlight Screws Screws are one of the most carefully controlled components used in the manufacture of Bridgeport’s fittings. Each screw is individually specified by Engineering, depending upon the requirements of each application. After specification, screw designs are sent to Purchasing for quotation and design refinements. Bridgeport’s Tri-Drive screws are specifically designed to work with three different types of drivers: Phillips, Straight Blade, and Robertson (square). Each screw is coated with quality zinc plating. The result is a screw that can handle the rigors of today’s automatic drivers in the field. xix Zinc Locknuts Locknuts are critical to the function of a fitting, yet many manufacturers offer the least expensive locknuts available – especially in zinc. Some offer a nut that has less than one complete thread to engage the fitting. Still, others use a very thin locknut that may never have been submitted to UL for listing with conduit. xx Bridgeport has a unique zinc locknut which is perfectly matched to the fitting in every size - perfectly matched because the thread of the locknut and the thread of the fitting are designed by Bridgeport’s engineers, produced in Bridgeport’s or other authorized factories, and inspected by Bridgeport’s Quality Control specialists. The locknuts themselves are of excellent quality, listed by UL for use inside or outside a box, on fittings, and on some conduit sizes. The result of this attention to detail is a fitting that can be installed with a single spin of the nut, a small advantage, but a benefit multiplied by the many millions of fittings sold by Bridgeport each month. When installing connectors to enclosures, NEC article 250.96 requires effective bonding of the metallic raceway to the box or enclosure to maintain continuity and safely conduct ground fault current likely to be imposed. Additionally, non-conductive paint or similar coating must be removed at the locknut contact surface unless the fitting is designed to remove the coating during normal assembly. During a fact-finding study conducted by UL, the observation was made that die cast zinc serrated locknuts, such as those manufactured by Bridgeport, have the ability to remove non-conductive coatings and safely maintain ground fault current. Other styles of die cast zinc locknuts, such as flat or “nibbed” types, had difficulty passing this UL testing. All of Bridgeport’s zinc die cast connectors feature reversible serrated zinc die cast locknuts, which provide increased coating penetration and gripping power. Precision cut threads and extra tightening lugs ease assembly. To ensure proper removal of paint or coating from enclosure, install the connector into the opening, assemble locknut hand tight, and then tighten the locknut 1/4 additional turn. After assembly, look for shiny surfaces in between lugs on the enclosure where the paint or coating has been removed. Always use UL listed connectors with Bridgeport’s unique serrated, cut thread, die cast zinc locknut such as Bridgeport Cat. Nos. 101-DC through 110-DC. xxi Bridgeport’s Design & Manufacturing Processes Many of the processes and tools used in the manufacture of Bridgeport Fitting’s products are proprietary. However, we have provided a brief overview below: Computer Aided Design (CAD) Bridgeport’s engineering department has standardized on the latest version of SolidWorks™ CAD software for all products and tooling design. In addition, we also maintain and use CadKey™, which was previously used to make older drawings. SolidWorks™ allows Bridgeport to create 3D designs inside the computer. This helps the engineer to better visualize the design in ways that older 2D systems cannot provide. The result is a value engineered product capable of meeting all required specifications. After a component is designed in CAD, engineering may use Rapid Prototyping (RP) technology to ‘print’ out precise, 3D, plastic parts to evaluate before tooling is made. These models are so accurate, engineering can actually test fit them with mating components to further validate designs. Bridgeport’s CAD files are then able to be exported to a Computer Aided Manufacturing (CAM) system, which is able to directly machine the tools that make production components. The equipment that is compatible with CAM is Bridgeport’s Computer Numerical Control (CNC) Milling or Electro-Discharge Machining (EDM) equipment. What this means is that Bridgeport’s engineers and toolmakers have the latest tools and technologies to properly and expertly create high-quality and precision tooling, thereby allowing better development and evolution of product design. xxii In-House Tooling Tools, dies, molds, and sophisticated automated production machines are produced in-house, by our own Tool and Die Department. Virtually every tooling element is routinely produced and maintained to the highest standards in the industry. Our expert tool and die makers maintain a large quantity of tools, including die cast molds, progressive stamping dies, automated fixturing, and assorted custom tooling. Typical tolerances for finished castings are to within .003” or less, and tooling tolerances are often as small as to within .0005” for critical dimensions. In addition, our stamping dies are designed and maintained to prevent tool breakage and component issues. We have invested heavily in our CNC milling and lathe operations, as well as our CNC Wire and Electrode EDM equipment. This means that our tooling parts are more consistent and are easier to replace when worn. Automated Manufacturing Once designed and built, Bridgeport tooling runs in some of the most modern and best-maintained equipment in the industry. Many of our diecast machines are fully automatic with computer process controls. Some castings are trimmed in a separate operation on hydraulic presses to insure a clean parting line and virtually perfect external threads. Other castings are automatically trimmed in the casting machine, which shortens process time. Our state-ofthe-art automatic assembly equipment tests all important fittings characteristics before assembly. These checks include screws driven to correct depth and torque, locknuts threaded near the shoulder of the fittings (to prevent coming loose during shipping), compression hex nuts properly assembled to body with gland ring in place, and smooth reaming and chamfering of fitting throats for ease in wire pulling. xxiii Patents Today, Bridgeport still continues to develop new and innovative products that are designed to save the customer time and money. Bridgeport has many products that are covered by one or more of the following US Patents: D604,242 D600,649 D545,650 D539,751 D530,678 D404,362 7,723,623 7,582,831 7,488,905 7,358,448 7,164,086 7,071,410 7,045,714 6,935,891 6,860,758 6,555,750 2,304,167 1,579,361 US Design Patents D601,094 D600,651 D596,578 D581,877 D535,949 D538,751 D534,060 D473,783 D518,791 D439,828 D365,510 D360,188 US Patents 7,703,813 7,645,947 7,563,100 7,549,549 7,438,327 7,402,752 7,350,832 7,214,890 7,154,042 7,151,223 7,064,273 7,064,272 7,022,914 7,002,076 6,916,988 6,872,886 6,817,895 6,765,143 6,444,907 5,342,994 2,137,840 2,122,252 D600,650 D558,542 D538,752 D479,984 D408,790 7,604,261 7,494,157 7,390,027 7,205,489 7,075,007 7,057,107 6,953,894 6,861,585 6,737,584 5,189,258 1,750,469 Trademarks The following are trademarks of Bridgeport Fittings, Inc.: 38 Special® Whipper-Snap® Bridgeport Quality Conduit & Cable Fittings® Bridgeport Switch® Red® Regal® Regal Fittings® Regal Manufacturing® Go Deep® xxiv Superior Finishes After Bridgeport’s extended manufacturing processes, zinc die-cast fittings are burnished to make the surface finish of the fittings brighter, to close surface porosity and enhance corrosion resistance, and to remove any scaling or discoloration. Using high-grade, stainlesssteel media and special chemicals in the burnishing process, Bridgeport produces fittings with a quality luster that improves the surface finish and value. The purpose is to reduce installation costs, and to increase installation quality for end users. Smoother and cleaner fittings assemble more easily and quickly, especially in bad weather. Wire pulling is never slowed down by a Bridgeport fitting. Our steel component parts are zinc plated per ASTM B633 – Type I, Bright or Semi-Bright, and UL514B 5.1.3.1, Table 17. We constantly monitor our zinc plating quality and thickness to insure a durable, high-performance, corrosion-resistant coating. xxv Daily Inspections Most of Bridgeport’s fittings are assembled and machined on highly automated production equipment, and each of these machines are purpose-designed and built by Bridgeport to conduct multiple inspections of the product being manufactured. Many thousands of automated inspections are made each day at the Bridgeport factory. As a result, customers are assured of the high quality of each Bridgeport fitting purchased. Craftmanship Bridgeport is proud of its personnel. The demands of producing the best fittings available require that competent and well-trained people care about good workmanship. Packaging Bridgeport assures our products get to market ready for installation by providing quality packaging second-to-none in the industry. Our heavy-duty, corrugated packaging, is designed for full product fill, is top loading for easy product access, and is shaped to maximize shelf space. All packaging is clearly labeled with application and certification data. Packaging Bar Codes Bridgeport provides bar coding symbols on all of our shipping containers, which helps distributors speed up shipping, receiving, and inventory control. Bridgeport follows identification guidelines set forth in 1987 by efforts of the National Electrical Manufacturers Allocation (NEMA), the National Electrical Manufacturers Representatives Association (NEMRA), and the National Association of Electrical Distributors (NAED). These standards employ the use of the UPC Shipping Container Symbol (Interleaved 2 of 5). Bridgeport can send you the necessary information that relates to our bar code numbers, their descriptions, and package quantities. xxvi Electrical Codes, Standards and Inspection Authorities Bridgeport’s products are conceived, engineered, manufactured, and inspected according to the recognized standards of the electrical industry. The Bridgeport catalog carries references by individual product to Underwriters Laboratories and Canadian Standards Association control numbers. Wherever listings are required by our customers, they are obtained and maintained. We also will obtain other listings which may be required for specific applications or geographic areas. Bridgeport’s product designs are continually reviewed for conformance to the latest National Electrical Code, UL, CSA, MIL-SPEC, and Federal Specification requirements. Our listed products often exceed standards established by these agencies. Our involvement on many committees at Underwriters Laboratories, Canadian Standards Association, and NEMA, confirms our commitment to manufacture quality products. When listings are required by our customers or end users, they will be obtained wherever possible. Requests for such listings should be directed to the Bridgeport factory or factory representatives. xxvii Third Party Certification Listings Currently, Bridgeport Fittings maintains listings at UL and CSA. However, we are not limited to certain marks, such as UL or CSA. NEC Articles 100.3(A&B), 90.7 & 100 defines product approval as being listed and labeled by a third party. In fact, there are other certification organizations equally recognized and accepted. These testing and certification laboratories are included on a Nationally Recognized Testing Laboratory (NRTL) list. The NRTL program is part of the Occupational Safety and Health Administration’s (OSHA) directive to ensure products are safe for use in the U.S. workplace. It recognizes the capabilities of privatesector testing organizations to determine whether a specific product meets safety standards developed by the American National Standards Institute (ANSI), Underwriters Laboratories (UL), American Society for Testing and Materials (ASTM), MIL-SPEC, and others. xxviii Each of the NRTL’s is certified by OSHA to be able to provide testing services for one or more specifications (i.e. UL, ASTM, ANSI, NEMA, etc.). The current OSHA NRTL list and each lab’s testing capabilities can be found at: http://www.osha.gov/dts/otpca/nrtl/index.html#nrtls Like the UL and CSA marks, other marks also indicate that our product has been independently tested by a NRTL, and that it has met the minimum requirements of widely accepted product safety standards (such as UL 514B). It also indicates that we have agreed to periodic follow-up inspections to verify continued compliance. The following are examples of other approved NRTL’s that Bridgeport may use in the future: xxix How Do I Specify Bridgeport Fittings? Many contractors and engineers ask us how to specify Bridgeport and make sure that’s what is installed. A general specification may read as follows: “FITTINGS: Metal conduit and EMT fittings shall be zincplated malleable iron, steel, aluminum, or zinc die cast as manufactured by Bridgeport Fittings, Inc. Connectors and couplings shall be threaded, set screw, or compression type, concrete-tight or rain-tight, when properly installed. Conduit bodies shall be malleable iron or aluminum, with cover gaskets when exposed to weather.” Other characteristics that set Bridgeport apart from other fittings include: • Ball burnished finish on all die cast zinc components • logo appears on each fitting and/or box • Steel parts are quality zinc plated for corrosion protection • Zinc locknuts have precision machine-cut threads & serrated faces • All set-screw products have staked screws • Throat diameters are smooth with no sharp edges • Quality materials are used for every component For answers to specific product questions please contact Bridgeport’s engineering department. Memberships and Credentials Bridgeport Fittings, Inc. maintains membership in the National Electrical Manufacturers Association (NEMA) and actively participates in its efforts to develop and maintain high standards for the electrical industry. Bridgeport also has an active membership in the National Fire Prevention Association (NFPA) in order to support the writing and revision process of the National Electrical Code (NEC), and to make every effort to contribute to the value of the code as a safety standard. In addition, Bridgeport is active on the technical advisory committees of Underwriters Laboratories, Inc (UL) in order to contribute to the maintenance and fair application of a universal standard in the National Electrical Code. xxx We welcome comments from users of Bridgeport’s products whenever the need is felt to bring an issue to the attention of any of the organizations we are affiliated with. This kind of advocacy is part of the responsibility shared by all within the industry, and your input counts. RoHS Compliance & Environmental Statements The directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (commonly referred to as the Restriction of Hazardous Substances Directive or RoHS) was adopted in February 2003 by the European Union. The RoHS directive took effect on July 1, 2006, and is required to be enforced and become law in each member state of the EU. This directive restricts the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic e-waste. The following substances are restricted by RoHS: 1. Lead 2. Mercury 3. Cadmium 4. Hexavalent chromium (chromium xxx or Cr6+) 5. Polybrominated biphenyls (PBB) 6. Polybrominated diphenyl ether (PBDE) All of Bridgeport’s products comply with the RoHS Directive. As a side note, many of our products are exempt from the RoHS Directive, as they are typically used in fixed industrial/ commercial buildings and equipment. Bridgeport Fittings, Inc. is committed to being environmentally responsible. We have obtained and maintain the proper permits, and have proper waste disposal processes and procedures in place to make sure we are compliant with all local, state, and federal environmental regulations. We also recycle our zinc scrap in house to reduce our impact on the environment. Bridgeport Fittings, Inc. does not use any Ozone Depleting Substances in the manufacture of its products. xxxi INDEX BY CATALOG NUMBER Cat. No. 30-DC2 31-DC2 32-DC2 Page Cat. No. 14 14 14 38ASP 104, 126 40-DC 41-DC 42-DC 16 16 16 51-DC2 52-DC2 40 40 61-DC 62-DC 63-DC 64-DC 40 40 40 40 71-DCA 72-DCA 17, 41 17, 41 71-DC2 72-DC2 17 17 81-DC 82-DC 83-DC 84-DC 17 17 17 17 81-DCA 82-DCA 83-DCA 84-DCA 17, 41 17, 41 17, 41 17, 41 91-DC2 92-DC2 93-DC2 91 91 91 100 18 101-DC 102-DC 103-DC 104-DC 105-DC 106-DC 107-DC 108-DC 109-DC 110-DC 18 18 18 18 18 18 18 18 18 18 101-S 102-S 103-S 104-S 105-S 106-S 107-S 108-S 109-S 110-S 111-S 112-S 18 18 18 18 18 18 18 18 18 18 18 18 121-S 122-S 123-S 124-S 125-S 126-S 127-S 128-S 129-S 130-S 19 19 19 19 19 19 19 19 19 19 xxxii Page Cat. No. Page 15, 42 15, 42 131-S 132-S 19 19 238-I 239-I 141 142 143 144 145 146 147 148 149 150 19 19 19 19 19 19 19 19 19 19 230-US 231-US 232-US 233-US 234-US 235-US 236-US 237-US 238-US 239-US 43 43 43 43 43 43 43 43 43 43 151-DC 152-DC 153-DC 154-DC 155-DC 156-DC 157-DC 158-DC 159-DC 160-DC 20 20 20 20 20 20 20 20 20 20 230-USI 231-USI 232-USI 233-USI 234-USI 235-USI 236-USI 237-USI 238-USI 239-USI 43 43 43 43 43 43 43 43 43 43 191 192 193 194 195 196 20 20 20 20 20 20 230-SBLU 231-SBLU 232-SBLU 233-SBLU 47 47 47 47 225-DC 226-DC 42 42 230 231 232 233 234 235 236 237 238 239 42 42 42 42 42 42 15, 42 15, 42 15, 42 15, 42 230-DC2 231-DC2 232-DC2 233-DC2 234-DC2 235-DC2 236-DC2 237-DC2 238-DC2 239-DC2 45 45 45 45 45 45 14, 45 14, 45 14, 45 14, 45 230-DCI2 231-DCI2 232-DCI2 233-DCI2 234-DCI2 235-DCI2 236-DCI2 237-DCI2 238-DCI2 239-DCI2 45 45 45 45 45 45 14, 45 14, 45 14, 45 14, 45 230-I 231-I 232-I 233-I 234-I 235-I 236-I 237-I 42 42 42 42 42 42 15, 42 15, 42 230-SR 231-SR 232-SR 233-SR 234-SR 235-SR 236-SR 237-SR 231-SBLK 231-SG 231-SO 231-SW 231-SY 38, 48 38, 48 38, 48 38, 48 38, 48 38, 48 38, 48 38, 48 46 47 48 48 49 240 241 242 243 244 245 246 247 248 249 43 43 43 43 43 43 16, 43 16, 43 16, 43 16, 43 240-DC 241-DC 242-DC 243-DC 244-DC 245-DC 246-DC 247-DC 248-DC 249-DC 44 44 44 44 44 44 16, 44 16, 44 16, 44 16, 44 240-SBLU 241-SBLU 242-SBLU 243-SBLU 240-SR 241-SR 242-SR 243-SR 50 50 50 50 39, 51 39, 51 39, 51 39, 51 INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. 244-SR 245-SR 246-SR 247-SR 39, 51 39, 51 39, 51 39, 51 240-US 241-US 242-US 243-US 244-US 245-US 246-US 247-US 248-US 249-US 44 44 44 44 44 44 44 44 44 44 241-SBLK 241-SG 241-SO 241-SW 241-SY Page Cat. No. 250-RTI2 251-RTI2 252-RTI2 253-RTI2 254-RTI2 255-RTI2 256-RTI2 257-RTI2 258-RTI2 259-RTI2 58 58 58 58 58 58 58 58 58 58 49 50 51 52 52 250-SRT 251-SRT 252-SRT 253-SRT 254-SRT 255-SRT 256-SRT 257-SRT 258-SRT 259-SRT 55 55 55 55 55 55 55 55 55 55 250 251 252 253 254 255 256 257 258 259 53 53 53 53 53 53 53 53 53 53 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 255-SRTI 256-SRTI 257-SRTI 258-SRTI 259-SRTI 55 55 55 55 55 55 55 55 55 55 250-I 251-I 252-I 253-I 254-I 255-I 256-I 257-I 258-I 259-I 53 53 53 53 53 53 53 53 53 53 250-US 251-US 252-US 253-US 254-US 255-US 256-US 257-US 258-US 259-US 54 54 54 54 54 54 54 54 54 54 250-USRT 251-USRT 252-USRT 253-USRT 254-USRT 255-USRT 55 55 55 55 55 55 250-USI 251-USI 252-USI 253-USI 254-USI 255-USI 256-USI 257-USI 258-USI 259-USI 54 54 54 54 54 54 54 54 54 54 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI 55 55 55 55 55 55 260 261 262 263 264 265 266 56 56 56 56 56 56 56 250-DC2 251-DC2 252-DC2 253-DC2 254-DC2 255-DC2 256-DC2 257-DC2 258-DC2 259-DC2 57 57 57 57 57 57 21, 57 21, 57 21, 57 21, 57 250-DCI2 251-DCI2 252-DCI2 253-DCI2 254-DCI2 255-DCI2 256-DCI2 257-DCI2 258-DCI2 259-DCI2 57 57 57 57 57 57 21, 57 21, 57 21, 57 21, 57 250-RT2 251-RT2 252-RT2 253-RT2 254-RT2 255-RT2 256-RT2 257-RT2 258-RT2 259-RT2 58 58 58 58 58 58 58 58 58 58 267 268 269 260-DC 261-DC 262-DC 263-DC 264-DC 265-DC 266-DC 267-DC 268-DC 269-DC Page 56 56 56 58 58 58 58 58 58 22, 58 22, 58 22, 58 22, 58 260-SRT 261-SRT 262-SRT 263-SRT 264-SRT 265-SRT 266-SRT 267-SRT 268-SRT 269-SRT 56 56 56 56 56 56 56 56 56 56 260-RT 261-RT 262-RT 263-RT 264-RT 265-RT 266-RT 267-RT 268-RT 269-RT 59 59 59 59 59 59 59 59 59 59 260-US 261-US 262-US 263-US 264-US 265-US 266-US 267-US 268-US 269-US 57 57 57 57 57 57 57 57 57 57 260-USRT 261-USRT 262-USRT 263-USRT 264-USRT 265-USRT 56 56 56 56 56 56 270-DC2 270-DCI2 59 59 280 281 60, 92, 140 60, 92, 140 280-DC 281-DC 61, 92, 140 61, 92, 140 282-DC 282-DCX 61, 92, 140 61, 92, 140 283-DC 61, 92, 140 290-DC 291-DC 292-DC 22, 61, 141 22, 61, 141 22, 61, 141 xxxiii INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. 290-MS 291-MS 292-MS 23, 62, 142 23, 62, 142 23, 62, 142 290-S 291-S 292-S 22, 61, 141 22, 61, 141 22, 61, 141 321 322 323 324 325 326 327 328 329 330 331 332 23 23 23 23 23 23 23 23 23 23 23 23 321-B 322-B 323-B 324-B 325-B 326-B 327-B 328-B 329-B 330-B 23 23 23 23 23 23 23 23 23 23 341 342 343 344 345 346 23 23 23 23 23 23 351-DC 352-DC 353-DC 354-DC 355-DC 356-DC 357-DC 358-DC 359-DC 360-DC 24 24 24 24 24 24 24 24 24 24 361 362 363 364 365 366 367 368 369 370 371 372 25 25 25 25 25 25 25 25 25 25 25 25 361-DC 362-DC 363-DC 364-DC 365-DC 366-DC 367-DC 368-DC 369-DC 370-DC 25 25 25 25 25 25 25 25 25 25 xxxiv Page Cat. No. 380SP 104, 126 381 382 383 384 384-14 385 385-14 386 386-14 387 387-40 388 388-40 389 389-40 390 390-40 391 392 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 381-DC 382-DC 383-DC 384-DC 384-DC14 385-DC 385-DC14 386-DC 386-DC14 387-DC 387-DC40 388-DC 388-DC40 389-DC 389-DC40 390-DC 390-DC40 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 403 403-DC2 407 408 410 412 414 416 417 418 419 420 93 94, 112 93 93 93 93 93 93 93 93 93 93 Page 407-DCI2 408-DCI2 410-DCI2 412-DCI2 414-DCI2 416-DCI2 94 94 94 94 94 94 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 74 74 74 74 74 74 74 74 74 74 74 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 74 74 74 74 74 74 74 74 74 74 74 429-NMLT 430-NMLT 431-NMLT 432-NMLT 433-NMLT 434-NMLT 435-NMLT 73 73 73 73 73 73 73 430-NMLTS 431-NMLTS 73 73 429-SLTG 430-SLTG 431-SLTG 432-SLTG 433-SLTG 434-SLTG 435-SLTG 76 76 76 76 76 76 76 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 407-I 408-I 410-I 412-I 414-I 416-I 417-I 418-I 419-I 420-I 93 93 93 93 93 93 93 93 93 93 429-SLT 430-SLT 431-SLT 432-SLT 433-SLT 434-SLT 435-SLT 436-SLT 437-SLT 438-SLT 439-SLT 440-SLT 441-SLT 407-DC2 408-DC2 410-DC2 412-DC2 414-DC2 416-DC2 417-DC2 418-DC2 419-DC2 420-DC2 94 94 94 94 94 94 94 94 94 94 429-SLTI 430-SLTI 431-SLTI 432-SLTI 433-SLTI 434-SLTI 435-SLTI 436-SLTI 437-SLTI 438-SLTI INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. 439-SLTI 440-SLTI 441-SLTI 75 75 75 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 433-SLTIG 434-SLTIG 435-SLTIG 76 76 76 76 76 76 76 449-SLT 450-SLT 451-SLT 452-SLT 453-SLT 454-SLT 455-SLT 456-SLT 457-SLT 458-SLT 459-SLT 77 77 77 77 77 77 77 77 77 77 77 449-SLTI 450-SLTI 451-SLTI 452-SLTI 453-SLTI 454-SLTI 455-SLTI 456-SLTI 457-SLTI 458-SLTI 459-SLTI 77 77 77 77 77 77 77 77 77 77 77 469-LT2 470-LT2 471-LT2 472-LT2 473-LT2 474-LT2 475-LT2 476-LT2 477-LT2 478-LT2 479-LT2 78 78 78 78 78 78 78 78 78 78 78 469-LTI2 470-LTI2 471-LTI2 472-LTI2 473-LTI2 474-LTI2 475-LTI2 476-LTI2 477-LTI2 478-LTI2 479-LTI2 78 78 78 78 78 78 78 78 78 78 78 469-NMLT 470-NMLT 471-NMLT 472-NMLT 473-NMLT 474-NMLT 475-NMLT 73 73 73 73 73 73 73 470-NMLTS 471-NMLTS 73 73 469-SLT 470-SLT 471-SLT 79 79 79 Page Cat. No. 472-SLT 473-SLT 474-SLT 475-SLT 476-SLT 477-SLT 478-SLT 479-SLT 79 79 79 79 79 79 79 79 469-SLTI 470-SLTI 471-SLTI 472-SLTI 473-SLTI 474-SLTI 475-SLTI 476-SLTI 477-SLTI 478-SLTI 479-SLTI 79 79 79 79 79 79 79 79 79 79 79 469-SLTG 470-SLTG 471-SLTG 472-SLTG 473-SLTG 474-SLTG 475-SLTG 80 80 80 80 80 80 80 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 473-SLTIG 474-SLTIG 475-SLTIG 80 80 80 80 80 80 80 561-DC2 561-DCI2 Page 115 115 563-DC2 98, 116, 144 565-DC2 117 566-DC2 117, 148 570-DC2 570-DCI2 570-DCR2 118 118 118 570-GI 570-G/RI 570-RI 120 120 120 571-DC2 572-DC2 573-DC2 101, 124 101, 124 101, 124 571-DCI2 572-DCI2 573-DCI2 101, 124 101, 124 101, 124 571-S 572-S 573-S 101, 124 101, 124 101, 124 571-SI 572-SI 573-SI 101, 124 101, 124 101, 124 581-DC 582-DC 583-DC 62, 91, 142 62, 91, 142 62, 91, 142 590-DC2 590-DCI2 103, 125 103, 125 595-DC2 595-DCI2 596-DC2 596-DCI2 127 127 127 127 501-DC2 112 507-DC2 507-DCI2 508-DC2 508-DCI2 95 95 95 95 519-DC2 520-DC2 521-DC2 522-DC2 523-DC2 524-DC2 525-DC2 97 97 97 97 97 97 97 519-DCI2 520-DCI2 521-DCI2 522-DCI2 523-DCI2 524-DCI2 525-DCI2 97 97 97 97 97 97 97 530-DC 531-DC 532-DC 533-DC 534-DC 535-DC 98 98 98 98 98 98 650-DC2 651-DC2 653-DC2 655-DC2 657-DC2 82, 148 83, 147 106, 130 106, 130 106, 130 96 540-SS 600-DC2 105 601-DC2 104, 128, 144 602-DC2 105 616-NMD 617-NMD 620-NM 621-NM 145 145 82, 146 82, 146 630 630-DC2 104 104 642 643 644 645 146 146 146 146 650-HD2 82, 148 545-DC2 114 651SP 83, 147 560-DC2 560-DCI2 115 115 660-DC2 662-DC2 664-DC2 560-MCIA2 115, 123 148, 164 148, 164 148, 164 xxxv INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. 665-DC2 666-DC2 670-DC2 672-DC2 674-DC2 675-DC2 676-DC2 148, 164 148, 164 148, 164 148, 164 148, 164 148, 164 148, 164 683-DC2 684-DC2 685-DC2 686-DC2 687-DC2 688-DC2 689-DC2 131 131 131 131 131 131 131 683-DCI2 684-DCI2 685-DCI2 686-DCI2 687-DCI2 688-DCI2 689-DCI2 131 131 131 131 131 131 131 683-DCX2 684-DCX2 685-DCX2 686-DCX2 687-DCX2 688-DCX2 689-DCX2 131 131 131 131 131 131 131 691-DC2 701 703 705 722 104, 128 204 204 204 161 732-SP 733-PS 204 149, 205 761-UF 762-UF 165 165 763-4 763-6 763-8 165 165 165 764-2 764-2N 764-3 165 165 165 765-2 765-3 165 165 766-2 766-3 766-4 766-4N 165 165 165 165 770-22 770-32 770-42 770-52 770-62 770-72 90 90 90 90 90 90 771-32 771-42 771-52 771-62 772-32 772-42 90 90 90 90 90 90 xxxvi 772-52 772-62 800 800-DC2 801 801-I 801-DC2 801-DCI2 802-ASP 802-DC2 802-DCI2 802-SP 802-MCIA 802-MCIA2 Page Cat. No. 90 90 106 106 107 107 109, 135 109, 135 110, 136 110, 136 110, 136 110, 136 136 136 803 803-DC2 106 106 804 804-I 804-DC2 804-DCI2 107 107 109, 135 109, 135 806 807 808 809 810 811 812 813 814 107 108 108 108 108 108 108 108 108 806-I 807-I 808-I 809-I 810-I 811-I 812-I 813-I 814-I 107 108 108 108 108 108 108 108 108 806-DC2 807-DC2 808-DC2 809-DC2 810-DC2 811-DC2 812-DC2 813-DC2 814-DC2 109, 135 109, 135 109, 135 109 109 109 109 109 109 806-DCI2 807-DCI2 808-DCI2 809-DCI2 810-DCI2 109, 135 109, 135 109, 135 109 109 830 830-DC2 840SP 841SP 845ASP 845SP 846SP 850SP 851ASP 851-DC2 851-DCI2 851SP 110 110, 132 96, 133 149 113 113 105, 129 111, 137 110 110 110 110 881-SE 882-SE 166 166 Page 883-SE 884-SE 166 166 890-MC 891-MC 137 137 895-DC2 895-DCI2 128 128 895-MC 138 900 900-F 901 902 903 904 905 906 907 908 909 910 912 913 28 111, 137 28 28 28 28 28 28 28, 64 28, 64 28, 64 28, 64 28 28 901-AL 902-AL 903-AL 904-AL 905-AL 906-AL 28 28 28 28 28 28 901-NS 902-NS 903-NS 30 30 30 901-S 902-S 903-S 904-S 905-S 906-S 907-S 908-S 909-S 910-S 29 29 29 29 29 29 29, 64 29, 64 29, 64 29, 64 920 921 922 923 924 925 64 64 64 64 64 64 920-NS 921-NS 922-NS 64 64 64 920-S 921-S 922-S 923-S 924-S 925-S 64 64 64 64 64 64 937-C 938-C 167 167 938-PVC 167 941 942 943 944 30, 65 30, 65 30, 65 30, 65 INDEX BY CATALOG NUMBER Cat. No. 945 946 947 948 949 950 941-AL 942-AL 943-AL 944-AL 945-AL 946-AL 951 951-A 951-S 952 953 953-S 954 Page Cat. No. 30, 65 30, 65 30, 65 30, 65 30, 65 30, 65 30 30 30 30 30 30 161, 178 161, 178 161, 178 161, 178 161, 178 161, 178 161, 178 961 962 963 964 965 966 967 968 969 970 162 162 162 162 162 162 162 162 162 162 971 972 973 974 975 976 977 978 162 162 162 162 162 162 162 162 981 982 983 984 985 986 987 988 989 990 162 162 162 162 162 162 162 162 162 162 1000 1001 1002 1003 1004 1005 1006 1007 1008 1025 1026 1027 1028 1028-XL 1029 1030 1030-XL 1061 1062 1063 1064 138, 206 138, 206 138, 206 138, 206 138, 206 138, 206 138, 206 138, 206 138, 206 12, 167 12, 167 12, 167 12, 167 12, 167 12, 167 12, 167 12, 167 31 31 31 31 Page Cat. No. 1065 1066 1067 1068 1069 31 31 31 31 31 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 31 31 31 31 31 31 31 31 31 31 1080 1081 1082 1083 1084 1085 1086 1087 1088 31 31 31 31 31 31 31 31 31 1089-1 1089-2 1089-3 1089-4 1089-5 1089-6 1089-7 1089-8 31 31 31 31 31 31 31 31 1090-1 1090-2 1090-3 1090-4 1090-5 1090-6 1090-7 1090-8 1090-9 31 31 31 31 31 31 31 31 31 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 32 32 32 32 32 32 32 32 32 32 32 32 1102-I 1103-I 1104-I 1105-I 1106-I 1107-I 1108-I 1109-I 1110-I 1111-I 32 32 32 32 32 32 32 32 32 32 1102-DC 1103-DC 1104-DC 1105-DC 33 33 33 33 Page 1106-DC 1107-DC 1108-DC 1109-DC 1110-DC 1111-DC 33 33 33 33 33 33 1102-DCI 1103-DCI 1104-DCI 1105-DCI 1106-DCI 1107-DCI 1108-DCI 1109-DCI 1110-DCI 1111-DCI 33 33 33 33 33 33 33 33 33 33 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 34 34 34 34 34 34 34 34 34 34 34 34 1121-AL 1122-AL 1123-AL 1124-AL 1125-AL 1126-AL 1127-AL 1128-AL 1129-AL 1130-AL 34 34 34 34 34 34 34 34 34 34 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 34 34 34 34 34 34 34 34 34 34 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 35 35 35 35 35 35 35 35 35 35 1161-HZ 1162-HZ 1163-HZ 1164-HZ 1165-HZ 1166-HZ 1167-HZ 1168-HZ 1169-HZ 202 202 202 202 202 202 202 202 202 xxxvii INDEX BY CATALOG NUMBER Cat. No. 1170-HZ 1171-HZ 1172-HZ 1173-HZ 1174-HZ 1175-HZ 1170 1171 1172 1173 1174 1175 1176 1179 1182 1185 Page Cat. No. Page 1307-B1 1308-B 1309-B 1312-B 1313-B 1315-B 154 153 154 153 154 154 1920 1921 1922 1923 1924 1925 65 65 65 65 65 65 35 35 35 35 35 35 35 35 35 35 1308-DC 1309-DC 153 154 1325-B 1325-B1 1326-B 1328-B 1330-B 1331-B 155 155 155 155 155 155 1325-BH 1330-BH 1345-BH 156 156 156 2100 2110 2120 2125 2130 2140 2150 2160 2170 2180 2190 163 163 163 163 163 163 163 163 163 163 163 1520-DC 1521-DC 1522-DC 1523-DC 1524-DC 1525-DC 1526-DC 1527-DC 36 36 36 36 36 36 36 36 2100-BN 2110-BN 2120-BN 2125-BN 2130-BN 2140-BN 163 163 163 163 163 163 1620-DC2 1621-DC2 60 60 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 28 28 28 28 28 28 28 28 28 28 28 2100-S 2110-S 2120-S 2125-S 2130-S 2140-S 2150-S 2160-S 2170-S 2180-S 2190-S 162 162 162 162 162 162 162 162 162 162 162 1691 1692 1693 1694 1695 1696 207 207 207 207 207 207 1191-DC2 207 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 168 168 168 168 168 168 168 168 168 168 168 168 1220 1221 169 169 1240-PVC 1241-PVC 1242-PVC 169 169 169 1246-MT 1257-MT 170 170 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 171 171 171 171 171 171 171 171 171 171 1251-PVC 1252-PVC 1253-PVC 1254-PVC 1255-PVC 1256-PVC 172 172 172 172 172 172 1253-S 1254-S 1255-S 1256-S 1257-S 1258-S 1259-S 1260-S 173 173 173 173 173 173 173 173 1306-B 1307-B 153 154 xxxviii Page Cat. No. 202 202 202 202 202 202 1701-DC 1702-DC 46 46 1791-DC 1792-DC 1793-DC 33 33 33 1881-SE 1882-SE 1883-SE 1884-SE 166 166 166 166 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 29 29 29 29 29 29 29, 65 29, 65 29, 65 29, 65 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 21 21 21 21 21 21 21 21 21 21 3000-US 3001-US 3002-US 3003-US 3004-US 3005-US 21 21 21 21 21 21 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 22 22 22 22 22 22 22 22 22 22 3100-US 3101-US 3102-US 3103-US 3104-US 3105-US 22 22 22 22 22 22 INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. 3161 3162 20 20 ALI-50 ALI-112 ALI-252 3500 3501 3502 3503 3504 3505 15 15 15 15 15 15 AMC-50 AMC-5075 AMC-52 AMC-50MCIA 3510 3511 15 15 3500-US 3501-US 3502-US 3503-US 3504-US 3505-US 15 15 15 15 15 15 3510-I 3511-I 15 15 3600 3601 3602 3603 3604 3605 16 16 16 16 16 16 3610 3611 16 16 3600-US 3601-US 3602-US 3603-US 3604-US 3605-US 16 16 16 16 16 16 3838ASP 3838SP 105, 129 105, 129 4157-DC63, 99, 117, 143 4360-DC 4361-DC 8400MCIA 8400SP 63, 81, 143 63, 81, 143 134 134 9791 9792 9793 9794 9795 9796 9797 150, 179 150, 179 150, 179 150, 179 150, 179 150, 179 150, 179 9882 150, 179 9891 9892 9893 9894 9895 9896 207 207 207 207 207 207 9951 9952 30 30 8469OSP 111, 132 BJ-100 BJ-200 BJ-400 Page Cat. No. 156 156 156 99, 121 99, 121 99, 121 122 157 157 157 BL16ASP BL16MCIA BL16SP 100, 114 116 100, 114 BL-17 BL-18 BL-19 100, 122 100, 122 100, 122 BL-17I BL-18I BL-19I 100, 122 100, 122 100, 122 BR-150 BR-200 BR-400 180 180 180 BRI-150 BRI-200 180 180 BRW-150 BRW-200 180 180 BRWI-150 BRWI-200 180 180 BS-050 BS-075 208 208 BXE-100 BXE-200 BXE-300 181, 208 181, 208 181, 208 C-31 C-32 C-33 C-34 C-35 C-36 67 67 67 67 67 67 C-41 C-42 C-43 C-44 C-45 C-46 C-47 C-48 C-49 C-50 2 2 2 2 2 2 2 2 2 2 C-37CG C-38CG C-39CG C-40CG 67 67 67 67 C-41CG C-42CG C-43CG C-44CG C-45CG C-46CG 2 2 2 2 2 2 C-41CGC C-42CGC C-43CGC C-44CGC C-45CGC C-46CGC C-61 C-62 C-63 C-64 C-65 C-66 C-67 C-68 Page 3, 67 3, 67 3, 67 3, 67 3, 67 3, 67 2 2 2 2 2 2 2 2 CC-25 CC-31 CC-37 181 181 181 CE-50 CE-75 40 40 CE-2571 203 CG770-250 CG770-350 CG770-450 CG770-560 CG770-650 CG771-250 CG771-350 CG771-450 CG771-560 CG771-650 CG771-750 CG771-850 CG772-560 CG772-650 CG772-750 CG772-850 CG772-950 CG772-1050 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 84, 85 CG773-850 CG773-950 CG773-1050 CG773-1150 CG773-1250 CG773-1375 CG774-1050 CG774-1150 CG774-1250 CG774-1375 86, 87 86, 87 86, 87 86, 87 86, 87 86, 87 86, 87 86, 87 86, 87 86, 87 CGA770250 CGA770350 CGA770450 CGA770560 CGA770650 CGA771250 CGA771350 CGA771450 CGA771560 CGA771650 CGA771750 CGA771850 CGA772560 CGA772650 CGA772750 CGA772850 CGA772950 CGA7721050 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 88, 89 xxxix INDEX BY CATALOG NUMBER Cat. No. Page Cat. No. CLU-35 CLU-70 CLU-125 156 156 156 CSE-075 CSE-100 36 36 DB-1308 DB-1309 157 157 DR-200 DR-300 DR-500 182 182 182 DS-100 DS-500 209 209 EC-075 EC-100 EC-125 EC-150 EC-200 EC-250 EC-300 EC-350 EC-400 66, 209 66, 209 66, 209 66, 209 66, 209 66, 209 66, 209 66, 209 66, 209 EYS-0452 EYS-0453 EYS-0550 EYS-2633 EYS-2634 EYS-2635 197 197 197 197 197 197 EYS-0452N EYS-0453N EYS-0550N EYS-2633N EYS-2634N EYS-2635N 197 197 197 197 197 197 FA-400 FA-401 FA-402 FA-403 FA-404 FA-411 38, 39 38, 39 38, 39 38, 39 38, 39 38, 39 FB-10 FS-500R FS-1000 203 210 210 GF38SP GF50SP 98 98 GRB-0445 GRB-0446 GRB-0584 GRB-0597 GRB-0600 GRB-0605 198 198 198 198 198 198 GRC-0443 GRC-0444 GRC-0556 GRC-0589 GRC-0561 GRC-0580 198 198 198 198 198 198 GRC-50 GRC-63 GRC-75 158 158 158 xl Page Cat. No. GRE-0447 GRE-0448 GRE-0582 GRE-0587 GRE-0598 GRE-0603 198 198 198 198 198 198 GRL-0439 GRL-0440 GRL-0546 GRL-0591 GRL-0558 GRL-0576 198 198 198 198 198 198 GRT-0441 GRT-0442 GRT-0547 GRT-0593 GRT-0559 GRT-0578 199 199 199 199 199 199 GRX-0449 GRX-0450 GRX-0585 GRX-0595 GRX-0601 GRX-0606 199 199 199 199 199 199 GRXZ-0468 GRXZ-0469 GRXZ-0586 GRXZ-0596 GRXZ-0602 GRXZ-0607 199 199 199 199 199 199 LB-31 LB-32 LB-33 LB-34 LB-35 LB-36 LB-37 LB-38 LB-39 LB-40 68 68 68 68 68 68 68 68 68 68 LB-41 LB-42 LB-43 LB-44 LB-45 LB-46 LB-47 LB-48 LB-49 LB-50 4 4 4 4 4 4 4 4 4 4 LB-41CG LB-42CG LB-43CG LB-44CG LB-45CG LB-46CG LB-47CG LB-48CG LB-49CG LB-50CG 4 4 4 4 4 4 4 4 4 4 LB-41CGC LB-42CGC LB-43CGC LB-44CGC LB-45CGC LB-46CGC 5, 68 5, 68 5, 68 5, 68 5, 68 5, 68 Page LB-61 LB-62 LB-63 LB-64 LB-65 LB-66 LB-67 LB-68 LB-69 LB-70 4 4 4 4 4 4 4 4 4 4 LL-31 LL-32 LL-33 LL-34 LL-35 LL-36 69 69 69 69 69 69 LL-41 LL-42 LL-43 LL-44 LL-45 LL-46 LL-47 LL-48 LL-49 LL-50 6 6 6 6 6 6 6 6 6 6 LL-41CG LL-42CG LL-43CG LL-44CG LL-45CG LL-46CG 6 6 6 6 6 6 LL-41CGC LL-42CGC LL-43CGC LL-44CGC LL-45CGC LL-46CGC LL-61 LL-62 LL-63 LL-64 LL-65 LL-66 LL-67 LL-68 LLR-41 LLR-42 LLR-43 LLR-44 LLR-45 LLR-46 7, 69 7, 69 7, 69 7, 69 7, 69 7, 69 6 6 6 6 6 6 6 6 8, 70 8, 70 8, 70 8, 70 8, 70 8, 70 LR-31 LR-32 LR-33 LR-34 LR-35 LR-36 70 70 70 70 70 70 LR-41 LR-42 LR-43 LR-44 LR-45 LR-46 LR-47 LR-48 LR-49 LR-50 9 9 9 9 9 9 9 9 9 9 INDEX BY CATALOG NUMBER Cat. No. LR-41CG LR-42CG LR-43CG LR-44CG LR-45CG LR-46CG LR-41CGC LR-42CGC LR-43CGC LR-44CGC LR-45CGC LR-46CGC Page Cat. No. 9 9 9 9 9 9 8, 71 8, 71 8, 71 8, 71 8, 71 8, 71 LR-61 LR-62 LR-63 LR-64 LR-65 LR-66 LR-67 LR-68 9 9 9 9 9 9 9 9 LVB-1 182 MC-050 MC-075 MCC-050 MCC-075 158 158 159 159 MK-10020 MK-20000 MK-20025 MK-20025R 174 174 174 174 MLB-44 MLB-45 MLB-46 MLB-47 MLB-48 MLB-49 MLB-50 12, 175 12, 175 12, 175 12, 175 12, 175 12, 175 12, 175 MWH-1 176 NMCB-1 139, 151, 183 NMCB-2 151, 183 NMCB-3 139 NMLV-100B NMLV-100F NMLV-200B NMLV-200F 184, 211 184, 211 184, 211 184, 211 NMWH-43 152, 185 RB-16 RB-17 160 160 RF-125 RF-150 RF-200 RF-250 176, 212 176, 212 176, 212 176, 212 RFN-125 RFN-200 RFN-250 RFN-300 RFN-400 176, 212 176, 212 176, 212 176, 212 176, 212 RWH-1 SC-41 SC-42 SC-43 SC-44 176 13, 72 13, 72 13, 72 13, 72 Page Cat. No. SC-46 SC-47 SC-49 13, 72 13, 72 13, 72 SC-61 SC-62 SC-63 SC-64 SC-66 SC-67 SC-69 13 13 13 13 13 13 13 SE-KIT100 SE-KIT150 SE-KIT200 177 177 177 SFR-75 SFS-75 213 213 SG38ASP SG38SP SG38MCIA 102, 119 102, 119 118 SG-61 SG-62 SG-63 SG-64 SG-66 SG-67 SG-69 13, 72 13, 72 13, 72 13, 72 13, 72 13, 72 13, 72 SGN-61 SGN-62 SGN-63 SGN-64 SGN-66 SGN-67 SGN-69 13, 72 13, 72 13, 72 13, 72 13, 72 13, 72 13, 72 SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 81 81 81 81 81 81 81 81 81 81 SRC-050 SRC-075 SRC-100 SRC-125 SRC-150 SRC-200 SRC-250 SRC-300 SRC-350 SRC-400 SRC-500 SRC-600 37 37 37 37 37 37 37 37 37 37 37 37 T-31 T-32 T-33 T-34 T-35 T-36 71 71 71 71 71 71 T-41 T-42 T-43 T-44 T-45 T-46 10 10 10 10 10 10 Page T-47 T-48 T-49 T-50 10 10 10 10 T-41CG T-42CG T-43CG T-44CG T-45CG T-46CG 10 10 10 10 10 10 T-41CGC T-42CGC T-43CGC T-44CGC T-45CGC T-46CGC T-61 T-62 T-63 T-64 T-65 T-66 T-67 T-68 11, 71 11, 71 11, 71 11, 71 11, 71 11, 71 10 10 10 10 10 10 10 10 TA-2636 TA-2637 TA-2638 TA-2937 TA-2938 TA-2943 201 201 201 201 201 201 TU-2992 TU-2993 TU-2994 TU-2995 TU-2996 TU-2997 200 200 200 200 200 200 UNF-1S UNF-2S UNF-3S 200 200 200 UNY-1S UNY-2S UNY-3S 200 200 200 TWB-51 TWB-52 TWB-53 TWB-54 TWB-55 TWB-56 TWB-57 TWB-58 TWB-59 TWB-60 66, 186 66, 186 66, 186 66, 186 66, 186 66, 186 66, 186 66, 186 66, 186 66, 186 TWE-125 TWE-150 TWE-200 TWE-250 TWE-300 TWE-350 TWE-400 41 41 41 41 41 41 41 USL-120 95 WGC-1 WGC-2 WGC-3 176 176 176 xli GENERAL NOTES General Notes and Product Standards • For product dimensions, consult our on-line catalog at www.bptfittings.com. • Due to ongoing product improvements, specifications and dimensions are subject to change without prior notice. • Underwriters Laboratories, Canadian Standards Association, and Federal Specifications are current at time of publication but are subject to change without prior notice. Current UL and SP listings are noted on the smallest unit carton label. Look for the appropriate logo. • This manual is intended for use as a guide in selection of electrical fittings manufactured by Bridgeport Fittings, Inc. Do not use this manual as an interpretation of the National Electrical Code or local regulations. Always consult your local electrical inspector for requirements in your area. Products listed or certified comply with the following certifications and specifications: Product Group UL Standard NEMA Standard Federal Specification CSA Standard Rigid & IMC Conduit Bodies UL-514A FB-1 W-C-586D C22.2 18.3-04 Rigid & IMC Conduit UL-514B FB-1 A-A-50553 C22.2 18.3-04 Red Fire Alarm Boxes and Fittings UL-514A UL-514B OS1 FB-1 A-A-50563 A-A-50553 – – EMT UL-514B FB-1 A-A-50553 C22.2 18.3-04 Liquid Tight UL-514B FB-1 A-A-50552 C22.2 18.3-04 Portable Cord UL-514B FB-1 A-A-50552 C22.2 18.3-04 Flexible Metal & AC/MC Cable UL-514B FB-1 A-A-50552 C22.2 18.3-04 Nonmetallic Cable UL-514B FB-1 A-A-50552 C22.2 18.3-04 Grounding Fittings UL-467 FB-1 A-A-50552 – Service Entrance UL-514B FB-1 W-C-586D C22.2 18.3-04 Hazardous Location UL-886 – – C22.2 xlii 30 BRIDGEPORT’S PRODUCT CATALOG 1 Rigid and IMC Conduit Bodies Type C Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance. File No. E11077 File No. 702847 (C-41CG thru C-46CG) Aluminum with Cover and Gasket Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. C-41 C-42 C-43 C-44 C-45 C-46 C-47 C-48 C-49 C-50 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 C-41CG C-42CG C-43CG C-44CG C-45CG C-46CG 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 Malleable Iron 2 Catalog Number Trade Size Unit Qty. Std. Pkg. C-61 C-62 C-63 C-64 C-65 C-66 C-67 C-68 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 5 5 2 2 2 1 ----- 50 50 20 10 10 6 1 1 Rigid and IMC Conduit Bodies Combination Type C Units are threaded for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. C-41CGC C-42CGC C-43CGC C-44CGC C-45CGC C-46CGC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 3 Rigid and IMC Conduit Bodies Type LB Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance. File No. E11077 File No. 702847 (LB-41CG thru LB-51CG) Aluminum with Cover and Gasket Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LB-41CG LB-42CG LB-43CG LB-44CG LB-45CG LB-46CG LB-47CG LB-48CG LB-49CG LB-50CG 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 Catalog Number Trade Size Unit Qty. Std. Pkg. LB-41 LB-42 LB-43 LB-44 LB-45 LB-46 LB-47 LB-48 LB-49 LB-50 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 Malleable Iron 4 Catalog Number Trade Size LB-61 LB-62 LB-63 LB-64 LB-65 LB-66 LB-67 LB-68 LB-69 LB-70 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” Unit Qty. 5 5 2 2 2 1 --------- Std. Pkg. 50 50 20 10 10 6 1 1 1 1 Rigid and IMC Conduit Bodies Combination Type LB Units are threaded for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. LB-41CGC LB-42CGC LB-43CGC LB-44CGC LB-45CGC LB-46CGC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 5 Rigid and IMC Conduit Bodies Type LL Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance. File No. E11077 File No. 702847 (LL-41CG thru LL-46CG) Aluminum with Cover and Gasket Catalog Number Aluminum Trade Size Unit Qty. Std. Pkg. LL-41CG 1/2” LL-42CG 3/4” LL-43CG 1” LL-44CG 1 1/4” LL-45CG 1 1/2” LL-46CG 2” 10 10 5 2 2 1 60 60 30 10 10 6 Catalog Number Trade Size Unit Qty. Std. Pkg. LL-41 LL-42 LL-43 LL-44 LL-45 LL-46 LL-47 LL-48 LL-49 LL-50 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 Malleable Iron 6 Catalog Number Trade Size Unit Qty. Std. Pkg. LL-61 LL-62 LL-63 LL-64 LL-65 LL-66 LL-67 LL-68 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 5 5 2 2 2 1 ----- 50 50 20 10 10 6 1 1 Rigid and IMC Conduit Bodies Combination Type LL Units are threaded for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. LL-41CGC LL-42CGC LL-43CGC LL-44CGC LL-45CGC LL-46CGC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 7 Rigid and IMC Conduit Bodies Combination Type LL/LR Combination type LL/LR style. Units are threaded for use with rigid or IMC as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. LLR-41 LLR-42 LLR-43 LLR-44 LLR-45 LLR-46 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 --- 60 60 30 10 10 5 Combination Type LR Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. LR-41CGC LR-42CGC LR-43CGC 1/2” 3/4” 1” 10 10 5 8 Std. Catalog Pkg. Number 60 60 30 Trade Size LR-44CGC 1 1/4” LR-45CGC 1 1/2” LR-46CGC 2” Unit Qty. Std. Pkg. 2 2 1 10 10 6 Rigid and IMC Conduit Bodies Type LR Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance. File No. E11077 File No. 702847 (LR-41CG thru LR-46CG) Aluminum with Cover and Gasket Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LR-41 LR-42 LR-43 LR-44 LR-45 LR-46 LR-47 LR-48 LR-49 LR-50 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 Catalog Number Trade Size Unit Qty. Std. Pkg. LR-41CG 1/2” LR-42CG 3/4” LR-43CG 1” LR-44CG 1 1/4” LR-45CG 1 1/2” LR-46CG 2” 10 10 5 2 2 1 60 60 30 10 10 6 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. LR-61 LR-62 LR-63 LR-64 LR-65 LR-66 LR-67 LR-68 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 5 5 2 2 2 1 ----- 50 50 20 10 10 6 1 1 9 Rigid and IMC Conduit Bodies Type T Threaded bodies for rigid conduit or IMC allow access for inspection, pulling and maintenance. File No. E11077 File No. 702847 (T-41CG thru T-46CG) Aluminum with Cover and Gasket Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg Catalog Number Trade Size Unit Qty. Std. Pkg. T-41 T-42 T-43 T-44 T-45 T-46 T-47 T-48 T-49 T-50 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 5 2 2 1 --------- 60 60 30 10 10 6 1 1 1 1 T-41CG T-42CG T-43CG T-44CG T-45CG T-46CG 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 Malleable Iron 10 Catalog Number Trade Size Unit Qty. Std. Pkg. T-61 T-62 T-63 T-64 T-65 T-66 T-67 T-68 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 5 5 2 2 2 1 ----- 50 50 20 10 10 6 1 1 Rigid and IMC Conduit Bodies Combination Type T Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. T-41CGC T-42CGC T-43CGC T-44CGC T-45CGC T-46CGC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 10 10 5 2 2 1 60 60 30 10 10 6 11 Rigid and IMC Conduit Bodies Mogul Conduit Bodies Allows larger access to the inside of a raceway for wire pulling. Raintight. MLB-44 thru MLB-46 File No. E11077 File No. E11077 (MLB-47 thru MLB-50) MLB-47 thru MLB-50 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Dim A Dim B Dim C MLB-44 MLB-45 MLB-46 MLB-47 MLB-48 MLB-49 MLB-50 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” --------------- 5 2 2 1 1 1 1 2 3/4” 4 3/4” 5 3/4” 6 1/4” 6 1/4” 7 7/8” 7 7/8” 2 3/8” 3 1/8” 3 1/8” 4 7/16” 4 7/16” 5 1/2” 5 1/2” 8 1/2” 11 1/2” 13” 20” 20” 26” 26” B A C Service Entrance LB Allows access to the interior of a conduit system for inspection, pulling and maintenance. Mounts flush against structure. Raintight. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. 1025 1026 1027 1028 1/2” 3/4” 1” 1 1/4” 5 5 ----- 50 50 20 10 12 Catalog Number Trade Size Unit Qty. Std. Pkg. 1029 1 1/2” 1030 2” 1028-XL 1 1/4” 1030-XL 2” --------- 5 4 10 6 Rigid and IMC Conduit Bodies Conduit Body Covers Encloses conduit body; supplied with screws. File No. E11077 Aluminum Only (SC-41 thru SC-49) Aluminum Catalog Number Trade Size SC-41 1/2” SC-42 3/4” SC-43 1” SC-44 1 1/4”-1 1/2” SC-46 2” SC-47 2 1/2”-3” SC-49 3 1/2”-4” Steel Unit Qty. Std. Catalog Pkg. Number 25 25 25 10 ------- 100 100 10 100 25 20 5 Trade Size SC-61 1/2” SC-62 3/4” SC-63 1” SC-64 1 1/4”-1 1/2” SC-66 2” SC-67 2 1/2”-3” SC-69 3 1/2”-4” Unit Qty. Std. Pkg. 25 25 25 10 ------- 100 100 100 100 25 20 5 Conduit Body Gaskets SG series provides dust-tight seal between conduit body and cover. SGN series provides both dust and rain-tight protection. SGN gaskets are impervious to most liquids and oil. Neoprene Cellulose Catalog Number Trade Size SG-61 1/2” SG-62 3/4” SG-63 1” SG-64 1 1/4”-1 1/2” SG-66 2” SG-67 2 1/2”-3” SG-69 3 1/2”-4” Unit Std. Catalog Qty. Pkg. Number Trade Size 1/2” 100 1000 SGN-61 3/4” 100 1000 SGN-62 1” 50 500 SGN-63 --- 100 SGN-64 1 1/4”-1 1/2” 2” --- 100 SGN-66 --- 100 SGN-67 2 1/2”-3” --25 SGN-69 3 1/2”-4” Unit Qty. Std. Pkg. 100 100 50 --------- 1000 1000 500 100 100 100 25 13 Rigid and IMC Conduit Fittings Set Screw Connectors 1/2” thru 1” 2 1/2” thru 4” Set screw type fitting used to join unthreaded rigid conduit to box or enclosure. Concrete-tight. File No. E24001*: 236-DC2 thru 239-DC2; 236-DCI2 thru 239-DCI2 *Note: 2 1/2” thru 4” is EMT conduit. listed for rigid steel or aluminum Zinc Die Cast Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 30-DC2 31-DC2 32-DC2 1/2” 3/4” 1” 50 25 25 500 250 250 236-DCI2 237-DCI2 238-DCI2 239-DCI2 2 1/2” 3” 3 1/2” 4” --------- 12 12 6 6 --------- 12 12 6 6 236-DC2 2 1/2” 237-DC2 3” 238-DC2 3 1/2” 239-DC2 4” 14 Rigid and IMC Conduit Fittings Set Screw Connectors 1/2” thru 1 1/2” 2 1/2” thru 4” 2” 5” & 6” Malleable 1/2” thru 2” Malleable Set screw type fitting used to join unthreaded rigid or IMC conduit to box or enclosure. Concrete-tight. File No. E9391: 3500-US thru 3505-US File No. E24001: 3500 thru 3509; 236 thru 239; 236-I thru 239-I *Note: UL listing not applicable to 5” & 6” Malleable Iron. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 236 237 238 239 2 1/2” 3” 3 1/2” 4” 2 2 ----- 10 10 6 6 Steel / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. 236-I 237-I 238-I 239-I 2 1/2” 3” 3 1/2” 4” 2 2 ----- 10 10 6 6 Steel (Made in the USA!) Catalog Number Trade Size Unit Qty. Std. Pkg. 3500-US 1/2” 3501-US 3/4” 3502-US 1” 3503-US 1 1/4” 3504-US 1 1/2” 3505-US 2” 50 25 25 20 10 5 500 250 250 120 60 30 Malleable Iron / Insulated Throat - 105°C Catalog Number 3510-I 3511-I Trade Size Unit Qty. Std. Pkg. 5” 6” 1 1 5 5 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. 3500 3501 3502 3503 3504 3505 3510 3511 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 5” 6” 50 25 25 20 10 5 1 1 200 250 100 120 60 30 5 5 15 Rigid and IMC Conduit Fittings Set Screw Couplings Zinc 1/2” thru 1” 1/2” thru 2” Malleable Zinc 2 1/2” thru 4” Steel 2” Steel 1/2” thru 1 1/2” Malleable 5” & 6” Steel 2 1/2” thru 4” Set screw type fitting used to join two unthreaded lengths of rigid conduit. Concrete-tight. 2 1/2” thru 4” furnished with four set screws. File No. E24001*: 3600 thru 3609; 246 thru 249; 246-DC thru 249-DC File No. E9391: 3600-US thru 3605-US File No. LR39354: 246-DC thru 249-DC *Note: 2 1/2” thru 4” zinc die cast is listed for rigid steel or aluminum EMT conduit. *Note: UL listing not applicable to 5” & 6” Malleable Iron. Zinc Die Cast Steel (Made in the USA!) Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 40-DC 41-DC 42-DC 246-DC 247-DC 248-DC 249-DC 1/2” 3/4” 1” 2 1/2” 3” 3 1/2” 4” 50 25 25 --------- 500 250 250 12 12 6 6 3600-US 1/2” 3601-US 3/4” 3602-US 1” 3603-US 1 1/4” 3604-US 1 1/2” 3605-US 2” 50 25 50 15 10 5 500 250 200 90 60 30 Malleable Iron Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 3600 3601 3602 3603 3604 3605 3610 3611 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 5” 6” 30 25 25 15 10 5 1 1 120 100 100 90 60 30 5 5 246 247 248 249 2 1/2” 3” 3 1/2” 4” 2 2 ----- 10 10 6 6 16 Rigid and IMC Conduit Fittings Pull Elbows Rigid to Box Used for connecting threaded rigid or IMC to box or enclosure. Removable aluminum cover and neoprene gasket facilitate wire pulling. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 71-DC2 72-DC2 1/2” 3/4” 10 5 100 50 File No. E9391 Pull Elbows Rigid to EMT to Box Used for connecting threaded rigid or EMT to box or enclosure. Removable aluminum cover and neoprene gasket facilitate wire pulling. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 71-DCA 72-DCA 1/2” 3/4” 10 5 100 50 Pull Elbows Rigid to Rigid Used for connecting threaded rigid or IMC to form 90° bend. Removable aluminum cover and neoprene gasket facilitate wire pulling. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 81-DC 82-DC 83-DC 84-DC 1/2” 3/4” 1” 1 1/4” 10 5 5 5 100 50 25 20 Pull Elbows Rigid to Rigid or EMT to EMT Used for connecting threaded rigid to rigid or EMT to EMT to form 90° bend. Removable aluminum cover and neoprene gasket facilitate wire pulling. Raintight when used with Rigid Conduit. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 81-DCA 82-DCA 83-DCA 84-DCA 1/2” 3/4” 1” 1 1/4” 10 5 5 5 100 50 25 20 17 Rigid and IMC Conduit Fittings Locknuts Steel Zinc Used to fasten threaded conduit to opening in a box or enclosure. File No. E9391: 101-S thru 112-S; 101-DC thru 106-DC File No. LR39354: 101-S thru 112-S Zinc Plated Steel Conduit Locknut Zinc Die Cast Fitting Locknut Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 100 101-S 102-S 103-S 104-S 105-S 106-S 107-S 108-S 109-S 110-S 111-S 112-S 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 200 100 100 100 ------------------- 2000 1000 1000 500 100 100 50 25 25 25 25 5 5 101-DC 102-DC 103-DC 104-DC 105-DC 106-DC 107-DC 108-DC 109-DC 110-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 --------------- 1000 1000 500 100 100 50 25 25 25 25 18 Rigid and IMC Conduit Fittings Bonding Locknuts Used in harsh vibration environments to fasten threaded conduit to unthreaded opening in a box or enclosure. File No. E20412: 121-S thru 130-S Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 121-S 122-S 123-S 124-S 125-S 126-S 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 50 25 25 10 10 10 200 100 100 50 50 50 127-S 128-S 129-S 130-S 131-S 132-S 2 1/2” 3” 3 1/2” 4” 5” 6” 5 5 --------- 25 25 5 5 5 5 Sealing Locknuts Used to provide raintight seal when fastening threaded conduit to unthreaded opening in a box or enclosure. File No. E191572: 141 thru 146 Steel / PVC Seal Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 141 142 143 144 145 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 25 25 200 100 100 100 100 146 147 148 149 150 2” 2 1/2” 3” 3 1/2” 4” 25 5 5 5 5 100 25 25 25 25 19 Rigid and IMC Conduit Fittings Threaded Hubs To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105°C. BUNA-N sealing ring completely encircles knockout to prevent contaminants from entering enclosure. File No. E9391: Type 4 - Water Tight File No. LR39354 *Note: UL listing not applicable to 5” & 6” Malleable Iron. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 151-DC 152-DC 153-DC 154-DC 155-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 10 5 2 100 100 50 25 20 156-DC 157-DC 158-DC 159-DC 160-DC 2” 2 1/2” 3” 3 1/2” 4” 2 ----1 1 20 10 5 5 5 Trade Size Unit Qty. Std. Pkg. 5” 6” ----- 2 2 Malleable Iron Catalog Number 3161 3162 Lock - A - Liners Used for converting ordinary bushings and connectors to code approved insulating bushings and connectors without disturbing wiring. File No. E11259 Polypropylene - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 191 192 193 1/2” 3/4” 1” 25 25 25 100 100 100 194 195 196 1 1/4” 1 1/2” 2” 10 10 10 40 40 40 20 Rigid and IMC Conduit Fittings Compression Connectors Steel Zinc Malleable Compression type connector used to join unthreaded steel rigid conduit to box or enclosure. 2 1/2” and larger zinc die cast also suitable for steel and aluminum rigid and EMT conduit. File No. E9391 Zinc Die Cast/Insulated Throat - 105°C Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 256-DC2 257-DC2 258-DC2 259-DC2 2 1/2” 3” 3 1/2” 4” --------- 12 12 6 6 Catalog Number Trade Size Unit Qty. Std. Pkg. 256-DCI2 257-DCI2 258-DCI2 259-DCI2 2 1/2” 3” 3 1/2” 4” --------- 12 12 6 6 Steel (Made in the USA!) Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 3000-US 1/2” 3001-US 3/4” 3002-US 1” 3003-US 1 1/4” 3004-US 1 1/2” 3005-US 2” 25 25 5 5 2 1 100 100 25 25 10 5 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 5 5 2 1 2 2 ----- 100 100 25 25 10 5 10 10 6 6 21 Rigid and IMC Conduit Fittings Compression Couplings Zinc Steel Malleable Compression type coupling used to join two lengths of unthreaded steel rigid conduit. 2 1/2” and larger zinc die cast also suitable for steel and aluminum rigid and EMT conduit. File No. E9391 Steel (Made in the USA!) Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 266-DC 267-DC 268-DC 269-DC 2 1/2” 3” 3 1/2” 4” --------- 12 12 6 6 Catalog Number Trade Size Unit Qty. Std. Pkg. 3100-US 1/2” 3101-US 3/4” 3102-US 1” 3103-US 1 1/4” 3104-US 1 1/2” 3105-US 2” 25 25 5 5 2 --- 100 100 25 25 10 5 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 3100 3101 3102 3103 3104 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 5 5 2 100 100 25 25 10 3105 3106 3107 3108 3109 2” 2 1/2” 3” 3 1/2” 4” 1 2 2 ----- 5 10 10 6 6 Combination Couplings Zinc Steel Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E9391: 290-S thru 292-S Zinc Die Cast Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 290-DC 291-DC 292-DC 1/2” 3/4” 1” 50 25 25 200 100 100 290-S 291-S 292-S 1/2” 3/4” 1” 25 25 10 100 100 50 22 Rigid and IMC Conduit Fittings Combination Couplings Used to join rigid or IMC to EMT. Coupling internally threaded for rigid / IMC. Zinc Plated Steel Compression type for EMT. Concrete-tight. Catalog Trade Unit File No. E9391: 292-MS Number Size Qty. Std. Pkg. 290-MS 291-MS 292-MS 1/2” 3/4” 1” 25 25 10 100 100 50 Pull Caps Used for capping EMT, rigid and most bushings. Polyethylene Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 341 342 343 1/2” 3/4” 1” 100 100 100 1000 1000 1000 344 345 346 1 1/4” 1 1/2” 2” 50 25 25 250 100 100 Bushings Used with locknut to protect conductors inside threaded rigid or IMC conduit entering a box. Rounded surface of bushing prevents damage to wire insulation. File No. E9391: 321 thru 332 File No. E11259: 321-B thru 330-B Plastic - 105°C File No. LR39354 Plastic - 150°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 321 322 323 324 325 326 327 328 329 330 331 332 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 100 100 50 ------------------- 1000 1000 500 100 100 50 25 25 25 20 5 5 321-B 322-B 323-B 324-B 325-B 326-B 327-B 328-B 329-B 330-B 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 50 --------------- 1000 1000 500 100 100 50 25 25 25 20 23 Rigid and IMC Conduit Fittings Insulated Grounding Bushings With Copper Lugs Used with locknut to terminate service conduit to cabinet. Solid copper lug provides high conductivity with lower heat rise than conventional solderless lugs. Plastic liner prevents damage to wire insulation. File No. E20412 Zinc Die Cast / Plastic Insulator - 150°C Catalog Number Wire Range Trade Size Unit Qty. Std. Pkg. Qty. 351-DC 352-DC 353-DC 354-DC 355-DC 356-DC 357-DC 358-DC 359-DC 360-DC #14 - #6 #14 - #6 #14 - #6 #14 - #6 #8 - #2 #8 - #2 #6 - #1/0 #6 - #1/0 #6 - #1/0 #6 - #1/0 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 25 20 20 10 2 2 ----- 250 250 250 200 200 100 10 10 5 5 24 Rigid and IMC Conduit Fittings Insulated Bushings Used with locknut to protect conductors inside threaded rigid or IMC conduit entering a box. Plastic liner prevents damage to wire insulation. All products rated 150°C except catalog numbers 371 and 372 which are rated 105°C. File No. E9391: 361 thru 370 File No. E9391 (361-DC thru 370-DC) Malleable Iron / Plastic Metaliner Zinc Die Cast / Plastic Metaliner Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 361 362 363 364 365 366 367 368 369 370 371 372 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 100 100 50 10 10 10 2 2 --------- 1000 1000 500 100 100 100 10 10 5 5 5 5 361-DC 362-DC 363-DC 364-DC 365-DC 366-DC 367-DC 368-DC 369-DC 370-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 50 10 10 10 2 2 ----- 1000 1000 500 100 100 100 10 10 5 5 25 Rigid and IMC Conduit Fittings Insulated Grounding Bushings Used with locknut to terminate service conduit to cabinet. Aluminum alloy lug provided for bonding jumper to neutral busbar. Plastic liner prevents damage to wire insulation. File No. E20412 Malleable Iron / Plastic Metaliner - 150°C Catalog Number Grounding Lug Wire Capacity Min. Max. Solid Strand Trade Size Unit Qty. Std. Pkg. Qty. 381 382 383 384 384-14 385 385-14 386 386-14 387 387-40 388 388-40 389 389-40 390 390-40 #14 - #4 #14 - #4 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM 1/2” 3/4” 1” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 2”` 2” 2 1/2” 2 1/2” 3” 3” 3 1/2” 3 1/2” 4” 4” 50 50 25 20 20 20 20 10 10 ----------------- 500 500 250 200 200 200 200 100 100 25 25 25 25 25 25 20 20 Malleable Iron / Plastic Metaliner - 150°C Catalog Number Grounding Lug Wire Capacity Min. Max. Solid Strand Trade Size Unit Qty. Std. Pkg. Qty. 391 392 #6 - #250 MCM #6 - #250 MCM 5” 6” ----- 5 5 26 Rigid and IMC Conduit Fittings Insulated Grounding Bushings Used with locknut to terminate service conduit to cabinet. Aluminum alloy lug provided for bonding jumper to neutral busbar. Plastic liner prevents damage to wire insulation. File No. E20412 Zinc Die Cast / Plastic Metaliner - 150°C Catalog Number Grounding Lug Wire Capacity Min. Max. Solid Strand Trade Size Unit Qty. Std. Pkg. Qty. 381-DC 382-DC 383-DC 384-DC 384-DC14 385-DC 385-DC14 386-DC 386-DC14 387-DC 387-DC40 388-DC 388-DC40 389-DC 389-DC40 390-DC 390-DC40 #14 - #4 #14 - #4 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #14 - #4 #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM #14 - #1/0 #6 - #250 MCM 1/2” 3/4” 1” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 2” 2” 2 1/2” 2 1/2” 3” 3” 3 1/2” 3 1/2” 4” 4” 50 50 25 20 20 20 20 10 10 ----------------- 500 500 250 200 200 200 200 100 100 25 25 25 25 25 25 20 20 27 Rigid and IMC Conduit Fittings Bushing Pennies Used inside bushing to prevent foreign matter from entering conduit. Galvanized Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1661 1662 1663 1664 1665 1666 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 500 250 100 50 50 50 1000 500 200 100 100 100 1667 1668 1669 1670 1671 2 1/2” 3” 3 1/2” 4” 5” 50 50 25 25 25 100 100 100 100 100 One Hole Pipe Straps Malleable/Aluminum To support rigid conduit and IMC to mounting surface. File No. E161206: 912 thru 913 File No. LR39354: 900 thru 910 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 900 901 902 903 904 905 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 100 100 --------- 1000 1000 100 100 50 50 906 907 908 909 910 912 913 2” 2 1/2” 3” 3 1/2” 4” 5” 6” --------------- 25 25 10 10 10 5 5 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 901-AL 902-AL 903-AL 1/2” 3/4” 1” 100 ----- 1000 100 100 904-AL 905-AL 906-AL 1 1/4” 1 1/2” 2” ------- 50 50 25 28 Rigid and IMC Conduit Fittings One Hole Pipe Straps Steel To support rigid conduit and IMC to mounting surface. File No. E161206: 904-S thru 908-S File No. LR39354: 901-S thru 910-S Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 901-S 902-S 903-S 904-S 905-S 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 50 50 25 25 500 500 200 100 100 906-S 907-S 908-S 909-S 910-S 2” 2 1/2” 3” 3 1/2” 4” ----------- 25 25 25 10 10 Two Hole Pipe Straps Used to secure rigid conduit or IMC. File No. E161206: 1907 thru 1910 File No. LR39354 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1901 1902 1903 1904 1905 1/2” 3/4” 1” 1 1/4” 1 1/2” 250 150 100 50 50 2500 1500 1000 500 500 1906 1907 1908 1909 1910 2” 2 1/2” 3” 3 1/2” 4” 25 25 20 15 10 250 100 80 60 40 29 Rigid and IMC Conduit Fittings Rigid Nail Straps Used to secure rigid conduit and IMC to wood. Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 901-NS 902-NS 903-NS 1/2” 3/4” 1” 100 100 100 1000 1000 1000 Clamp Backs Provides space between conduit and mounting surface, for use with malleable or aluminum straps. File No. E161206: 9951 thru 9952 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 941 942 943 944 945 946 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 50 50 25 20 10 5 250 250 100 100 100 50 947 948 949 950 9951 9952 2 1/2” 3” 3 1/2” 4” 5” 6” 2 2 --------- 10 10 5 5 5 5 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 941-AL 942-AL 943-AL 1/2” 3/4” 1” 50 50 25 250 250 100 944-AL 945-AL 946-AL 1 1/4” 1 1/2” 2” 20 10 5 100 100 50 30 Rigid and IMC Conduit Fittings Reducing Washers To be used in pairs to reduce the size of knockout holes. File No. E11259: 1061 thru 1088 File No. LR39354: 1061 thru 1088 Galvanized Steel Catalog Number Trade Size Unit Std. Qty. Pkg. Catalog Number 1089-1 3 1/2” - 1/2” --1089-2 3 1/2” - 3/4” --1089-3 3 1/2” - 1” --1089-4 3 1/2” - 1 1/4” --1089-5 3 1/2” - 1 1/2” --1089-6 3 1/2” - 2” --1089-7 3 1/2” - 2 1/2” --1089-8 3 1/2” - 3” --- 10 10 10 10 10 10 10 10 1090-1 1090-2 1090-3 1090-4 1090-5 1090-6 1090-7 1090-8 1090-9 10 10 10 10 10 10 10 10 10 1061 1062 1063 1064 1065 1066 1067 1068 1069 3/4” - 1/2” 1” - 1/2” 1” - 3/4” 1 1/4” - 1/2” 1 1/4” - 3/4” 1 1/4” - 1” 1 1/2” - 1/2” 1 1/2” - 3/4” 1 1/2” - 1” 250 250 250 100 100 100 100 100 100 1000 1000 1000 500 500 500 200 200 200 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1 1/2” - 1 1/4” 2” - 1/2” 2” - 3/4” 2” - 1” 2” - 1 1/4” 2” - 1 1/2” 2 1/2” - 1/2” 2 1/2” - 3/4” 2 1/2” - 1” 2 1/2” - 1 1/4” 100 50 50 50 50 50 50 50 50 50 200 100 100 100 100 100 100 100 100 100 1080 2 1/2” - 1 1/2” 1081 2 1/2” - 2” 1082 3” - 1/2” 1083 3” - 3/4” 1084 3” - 1” 1085 3” - 1 1/4” 1086 3” - 1 1/2” 1087 3” - 2” 1088 3” - 2 1/2” 50 50 --------------- 100 100 25 25 25 25 25 25 25 Trade Size 4” - 1/2” 4” - 3/4” 4” - 1” 4” - 1 1/4” 4” - 1 1/2” 4” - 2” 4” - 2 1/2” 4” - 3” 4” - 3 1/2” Unit Std. Qty. Pkg. ------------------- 31 Rigid and IMC Conduit Fittings Conduit Nipples When used with locknut, conduit nipples serve as a short raceway between enclosures. File No. E9391 File No. LR39354 Malleable Iron / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1102-I 1103-I 1104-I 1105-I 1106-I 1/2” 3/4” 1” 1 1/4” 1 1/2” 100 50 25 10 10 1000 500 250 100 100 1107-I 1108-I 1109-I 1110-I 1111-I 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 25 10 10 5 5 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1102 1103 1104 1105 1106 1107 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 50 25 10 10 5 1000 500 250 100 100 25 1108 1109 1110 1111 1112 1113 2 1/2” 3” 3 1/2” 4” 5” 6” 2 2 --------- 10 10 5 5 5 5 32 Rigid and IMC Conduit Fittings Conduit Nipples When used with a locknut, conduit nipples serve as a short raceway between enclosures. File No. E9391 File No. LR39354 1” Length Zinc Die Cast Conduit Nipples Catalog Number Trade Size Unit Qty. Std. Pkg. 1791-DC 1792-DC 1793-DC 1/2” 3/4” 1” 100 50 25 1000 500 250 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1102-DC 1103-DC 1104-DC 1105-DC 1106-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 100 50 25 10 10 1000 500 250 100 100 1107-DC 1108-DC 1109-DC 1110-DC 1111-DC 2” 2 1/2” 3” 3 1/2” 4” 5 --------- 50 25 10 10 10 Zinc Die Cast / Insulated Throat - 105°C Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1102-DCI 1/2” 1103-DCI 3/4” 1104-DCI 1” 1105-DCI 1 1/4” 1106-DCI 1 1/2” 100 50 25 10 10 1000 500 250 100 100 1107-DCI 2” 1108-DCI 2 1/2” 1109-DCI 3” 1110-DCI 3 1/2” 1111-DCI 4” 5 --------- 50 25 10 10 10 Catalog Number 33 Rigid and IMC Conduit Fittings Three-Piece Conduit Couplings Used to join two lengths of threaded rigid and IMC conduit. File No. E9391: 1121 thru 1130 & 1121-AL thru 1130-AL File No. LR39354: 1121 thru 1132 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1121 1122 1123 1124 1125 1126 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 10 5 ------- 100 100 50 25 20 10 1127 1128 1129 1130 1131 1132 2 1/2” 3” 3 1/2” 4” 5” 6” ------------- 5 5 4 5 2 1 Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1121-AL 1/2” 1122-AL 3/4” 1123-AL 1” 1124-AL 1 1/4” 1125-AL 1 1/2” 25 10 5 5 5 100 100 50 25 20 1126-AL 2” 1127-AL 2 1/2” 1128-AL 3” 1129-AL 3 1/2” 1130-AL 4” 2 1 1 1 1 10 5 5 5 5 Aluminum Catalog Number Self-Aligning, Raintight, Three-Piece Conduit Couplings Used to join two lengths of threaded rigid and IMC conduit. Patented. File No. E9391 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1121-RT 1122-RT 1123-RT 1124-RT 1125-RT 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 10 5 - 100 100 50 25 20 1126-RT 1127-RT 1128-RT 1129-RT 1130-RT 2” 2 1/2” 3” 3 1/2” 4” ----------- 10 5 5 4 5 34 Rigid and IMC Conduit Fittings Reducing Bushings Used to reduce the size of internal female threads. File No. LR39354: Steel Zinc Plated Steel Catalog Number Trade Size 1160 1/2” - 3/8” 1161 3/4” - 1/2” 1162 1” - 1/2” 1163 1” - 3/4” 1164 1 1/4” - 1/2” 1165 1 1/4” - 3/4” 1166 1 1/4” - 1” 1167 1 1/2” - 1/2” Unit Std. Qty. Pkg. Catalog Number 100 100 50 50 20 20 25 10 1168 1 1/2” - 3/4” 1169 1 1/2” - 1” 1170 1 1/2” - 1 1/4” 1171 2” - 1/2” 1172 2” - 3/4” 1173 2” - 1” 1174 2” - 1 1/4” 1175 2” - 1 1/2” 10 10 10 10 10 10 10 10 Unit Std. Qty. Pkg. Catalog Number Unit Std. Qty. Pkg. ----- 1182 1185 500 500 250 250 100 100 100 50 Trade Size Unit Std. Qty. Pkg. 50 50 50 50 50 50 50 50 Malleable Iron Catalog Number 1176 1179 Trade Size 2 1/2” - 2” 3” - 2 1/2” 5 5 Trade Size 3 1/2” - 3” 4” - 3 1/2” ----- 5 5 35 Rigid and IMC Conduit Fittings Offset Nipples Used to offset the axis of raceway 3/4” between enclosure runs. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1520-DC 1521-DC 1522-DC 1/2” 3/4” 1” 20 10 5 200 100 50 1523-DC 1 1/4” 1524-DC 1 1/2” 1525-DC 2” 10 10 5 40 40 30 Unit Qty. Std. Pkg. 2 2 10 10 Cast Zinc Catalog Number Trade Size 1526-DC 2 1/2” 1527-DC 3” Concrete Slab Elbows Concrete slab elbows for use in minimum 6” concrete poured or pre-fabricated slabs. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. CSE-075 CSE-100 3/4” 1” ----- 5 5 36 Rigid and IMC Conduit Fittings Split Rigid Couplings Split couplings used to join two lengths of threaded rigid and IMC conduit. File No. E9391 Zinc Plated Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. SRC-050 SRC-075 SRC-100 SRC-125 SRC-150 SRC-200 SRC-250 SRC-300 SRC-350 SRC-400 SRC-500 SRC-600 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 25 10 5 ------------------- 100 100 50 25 20 10 5 5 4 5 2 1 37 Red Fire Alarm Boxes and Fittings Red® Fire Alarm Connectors Set screw connector used to join EMT to box or enclosure. Color coded red to match EMT for easy identification. Use with red EMT for emergency circuits, fire alarm and security system applications. Concretetight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Patented. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-SR 231-SR 232-SR 233-SR 1/2” 3/4” 1” 1 1/4” 50 25 25 20 500 250 250 120 234-SR 235-SR 236-SR 237-SR 1 1/2” 2” 2 1/2” 3” 10 5 2 2 60 30 10 10 Red Fire Alarm Boxes New red steel fire alarm boxes to meet visual identification requirements for fire alarm installations. Available in a variety of sizes to accommodate both old and new work requirements. Provides positive visual identification and can withstand the harshest environmental conditions. File No. E11077 Patented. Steel Catalog Number Description Mounting Bracket Each Side Conduit FA-400 1 1/2” deep drawn box 4-square No (2) 1/2” (1) 3/4” FA-401 2 1/8” deep welded box 4-square No (2) 1/2” (1) 1/2” & 3/4” FA-402 2 1/8” deep welded box 4-square CV (2) 1/2” (1) 1/2” & 3/4” FA-403 Flat 4-square cover No N/A FA-404 2 1/8” deep welded 4-square extension ring No No (2) 1/2” (1) 1/2” & 3/4” FA-411 2 1/8” deep welded box 4 11/16”square No (3) 1/2”& 3/4” 38 Red Fire Alarm Boxes and Fittings Red® Fire Alarm Couplings Set screw coupling used to join two lengths of EMT. Color coded red to match EMT for easy identification. Use with red EMT for emergency circuits, fire alarm and security system applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Patented. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 240-SR 241-SR 242-SR 243-SR 1/2” 3/4” 1” 1 1/4” 50 25 20 15 500 250 200 90 244-SR 245-SR 246-SR 247-SR 1 1/2” 2” 2 1/2” 3” 10 5 2 2 60 30 10 10 Each End Conduit Bottom Conduit Cu In. Capacity Unit Qty. Std Pkg Qty. (2) 1/2” (1) 3/4” (3) 1/2” (2) 3/4” 21.0 --- 50 (2) 1/2” (1)1/2’ & 3/4” (3) 1/2” (2) 1/2” & 3/4” 30.3 --- 50 (2) 1/2” (1) 1/2” & 3/4” (3) 1/2” (2) 1/2’ & 3/4” 30.3 --- 50 N/A N/A N/A --- 50 (2) 1/2” (1) 1/2” & 3/4” N/A 30.3 --- 50 (3) 1/2” & 3/4” (3) 1/2” (2) 1/2’ & 3/4” 42.0 --- 50 39 EMT Fittings Pull Elbows Used to connect EMT to box or enclosure. Removable aluminum cover to facilitate wire pulling. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 51-DC2 52-DC2 1/2” 3/4” 10 5 100 50 Pull Elbows Used to connect two lengths of EMT to form a 90° bend. Removable aluminum cover to facilitate wire pulling. File No. E9391 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 61-DC 62-DC 63-DC 64-DC 1/2” 3/4” 1” 1 1/4” 10 5 5 5 100 50 25 20 Corner Elbows Used to connect two lengths of EMT to form a 90° bend. File No. E9391 Zinc Die Cast 40 Catalog Number Trade Size Unit Qty. Std. Pkg. CE-50 CE-75 1/2” 3/4” 10 5 100 50 EMT Fittings Pull Elbows Used for connecting threaded rigid or EMT to box or enclosure. Removable aluminum cover and neoprene gasket facilitate wire pulling. File No. E9391 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. 71-DCA 72-DCA 1/2” 3/4” 10 5 100 50 Pull Elbows Used for connecting threaded rigid to rigid or EMT to EMT to form 90° bend. Removable aluminum cover and neoprene gasket facilitate wire pulling. File No. E9391 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. 81-DCA 82-DCA 83-DCA 84-DCA 1/2” 3/4” 1” 1 1/4” 10 5 5 5 100 50 25 20 90° Set Screw Coupling Elbows Eliminates the need to bend conduit, reducing time and installation costs. Tri-drive screw. Concrete tight when taped. File No. E24001 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Dim A Dim B Dim C TWE-125 TWE-150 TWE-200 TWE-250 TWE-300 TWE-350 TWE-400 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” --------------- 5 5 2 1 1 1 1 11 1/4” 12” 14 1/4” 18 1/2” 21” 24 1/2” 25 1/4” 11 1/4” 12” 14 1/4” 18 1/2” 21” 24 1/2” 25 1/4” 7 3/4” 9 1/4” 10 3/8” 11 1/4” 13 1/4” 15 3/4” 17” 41 EMT Fittings Low Profile Compression Connectors Compression type connector used to join EMT to box or enclosure. Concrete-tight. File No. E24001 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 225-DC 226-DC 1/2” 3/4” 50 50 500 500 Set Screw Connectors 1/2” thru 2” 2 1/2” thru 4” Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. 1/2” thru 2” furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230 231 232 233 234 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 20 10 500 250 250 120 60 235 236 237 238 239 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 30 10 10 6 6 Steel / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-I 231-I 232-I 233-I 234-I 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 20 10 500 250 250 120 60 235-I 236-I 237-I 238-I 239-I 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 30 10 10 6 6 42 EMT Fittings Made in the USA Steel Set Screw Connectors 1/2” thru 2” 2 1/2” thru 4” Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-US 231-US 232-US 233-US 234-US 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 20 10 500 250 250 120 60 235-US 236-US 237-US 238-US 239-US 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 30 10 10 6 6 Steel/Insulated Throat-105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-USI 231-USI 232-USI 233-USI 234-USI 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 20 10 500 250 250 120 60 235-USI 236-USI 237-USI 238-USI 239-USI 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 30 10 10 6 6 Set Screw Couplings 2 1/2” thru 4” 1/2” thru 2” Set screw type coupling used to join two lengths of EMT. Concrete-tight. 1/2” thru 2” furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 240 241 242 243 244 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 20 15 10 500 250 200 90 60 245 246 247 248 249 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 30 10 10 6 6 43 EMT FITTINGS Made in the USA Steel Set Screw Couplings 1/2” thru 2” 2 1/2” thru 4” Set screw type fitting used to join two lengths of EMT. Concrete-tight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 240-US 241-US 242-US 243-US 244-US 245-US 246-US 247-US 248-US 249-US 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 20 15 10 5 2 2 ----- 500 250 200 90 60 30 10 10 6 6 Set Screw Couplings Zinc 1/2” thru 1” Zinc 1 1/4” thru 2” Zinc 2 1/2” thru 4” Set screw type coupling used to join two lengths of EMT. Concrete-tight. 1/2” thru 2” furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 2” thru 4” UL listed for both steel and aluminum EMT. File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 240-DC 241-DC 242-DC 243-DC 244-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 25 10 10 500 250 250 100 100 245-DC 246-DC 247-DC 248-DC 249-DC 2” 2 1/2” 3” 3 1/2” 4” 10 --------- 60 12 12 6 6 44 EMT FITTINGS Set Screw Connectors 1/2” thru 1” 1 1/4” thru 2” 2 1/2” thru 4” Set screw connector used to join EMT to box or enclosure. 2” thru 4” die cast UL listed for both steel and aluminum EMT. Concrete-tight. 1/2” thru 2” furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-DC2 1/2” 231-DC2 3/4” 232-DC2 1” 233-DC2 1 1/4” 234-DC2 1 1/2” 50 25 25 10 10 500 250 250 100 100 235-DC2 2” 236-DC2 2 1/2” 237-DC2 3” 238-DC2 3 1/2” 239-DC2 4” 10 --------- 60 12 12 6 6 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-DCI2 1/2” 231-DCI2 3/4” 232-DCI2 1” 233-DCI2 1 1/4” 234-DCI2 1 1/2” 50 25 25 10 10 500 250 250 100 100 235-DCI2 2” 236-DCI2 2 1/2” 237-DCI2 3” 238-DCI2 3 1/2” 239-DCI2 4” 10 --------- 60 12 12 6 6 45 EMT FITTINGS Quick Install EMT Connectors 1701-DC Quickly joins EMT to box or enclosure without the use of a locknut. Simply: • Insert fitting into the knockout • Insert EMT into the fitting • Tighten the set screw to simultaneously secure the EMT into the fitting and lock the fitting into the box or enclosure File No. E24001 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 1701-DC 1702-DC 1/2” 3/4” 50 25 500 250 Black Set Screw Connectors Set screw connector used to join EMT to box or enclosure. Color coded black to match EMT for easy identification. Use with black EMT in dark colored areas or in open architecture applications. Concretetight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Patented. Steel 46 Catalog Number Trade Size Unit Qty. Std. Pkg. 231-SBLK 3/4” 25 250 EMT FITTINGS Blue Set Screw Connectors Set screw connector used to join EMT to box or enclosure. Color coded blue to match EMT for easy identification. Use with blue EMT for low voltage wiring, data comm/video and network security applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Patented. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 230-SBLU 1/2” 231-SBLU 3/4” 232-SBLU 1” 233-SBLU 1 1/4” 50 25 25 20 500 250 250 120 Green Set Screw Connectors Set screw connector used to join EMT to box or enclosure. Color coded green to match EMT for easy identification. Use with green EMT for grounding/bonding, hospital and healthcare, such as nurse call station applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Patented. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 231-SG 3/4” 25 250 47 EMT FITTINGS Orange Set Screw Connectors Set screw connector used to join EMT to box or enclosure. Color coded orange to match EMT for easy identification. Use with orange EMT in construction/research, fiber optic, isolated circuits, and auto repair/maintenance applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. Steel File No. E24001 Patented. Catalog Number Trade Size Unit Qty. Std. Pkg. 231-SO 3/4” 25 250 Red® Fire Alarm Connectors Set screw connector used to join EMT to box or enclosure. Color coded red to match EMT for easy identification. Use with red EMT for emergency circuits, fire alarm and security system applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/ Robertson head screws. File No. E24001 Patented. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 230-SR 231-SR 232-SR 233-SR 1/2” 3/4” 1” 1 1/4” 50 25 25 20 500 250 250 120 234-SR 235-SR 236-SR 237-SR 1 1/2” 2” 2 1/2” 3” 10 5 2 2 60 30 10 10 White Set Screw Connectors Set screw connector used to join EMT to box or enclosure. Color coded white to match EMT for easy identification. Use with white EMT in light colored areas and open architecture applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/ Robertson head screws. Steel File No. E24001 Patented. Catalog Number Trade Size Unit Qty. Std. Pkg. 48 231-SW 3/4” 25 250 EMT FITTINGS Yellow Set Screw Connectors Set screw coupling used to join two lengths of EMT. Color coded yellow to match EMT for easy identification. Use with yellow EMT in special equipment, caution areas, and high voltage applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 231-SY 3/4” 25 250 Black Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded black to match EMT for easy identification. Use with black EMT in dark colored areas or in open architecture applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 241-SBLK 3/4” 25 250 49 EMT Fittings Blue Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded blue to match EMT for easy identification. Use with blue EMT for low voltage wiring, data comm/video and network security applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 240-SBLU 1/2” 241-SBLU 3/4” 242-SBLU 1” 243-SBLU 1 1/4” 50 25 20 15 500 250 200 90 Green Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded green to match EMT for easy identification. Use with green EMT for critical circuits, nurse call stations and hospital and healthcare applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel 50 Catalog Number Trade Size Unit Qty. Std. Pkg. 241-SG 3/4” 25 250 EMT FITTINGS Orange Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded orange to match EMT for easy identification. Use with orange EMT in construction/research, fiber optic and auto repair/maintenance applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 241-SO 3/4” 25 250 Red® Fire Alarm Couplings Set screw coupling used to join two lengths of EMT. Color coded red to match EMT for easy identification. Use with red EMT for emergency circuits, fire alarm and security system applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg Catalog Number Trade Size Unit Qty. Std. Pkg 240-SR 241-SR 242-SR 243-SR 1/2” 3/4” 1” 1 1/4” 50 25 20 15 500 250 200 90 244-SR 245-SR 246-SR 247-SR 1 1/2” 2” 2 1/2” 3” 10 5 2 2 60 30 10 10 51 EMT Fittings White Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded white to match EMT for easy identification. Use with white EMT in light colored areas and open architecture applications. Concretetight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 241-SW 3/4” 25 250 Yellow Set Screw Couplings Set screw coupling used to join two lengths of EMT. Color coded yellow to match EMT for easy identification. Use with yellow EMT in special equipment, caution areas, and high voltage applications. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E24001 Steel 52 Catalog Number Trade Size Unit Qty. Std. Pkg. 241-SY 3/4” 25 250 EMT FITTINGS Compression Connectors Compression type connector used to join EMT to box or enclosure. Concrete-tight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250 251 252 253 254 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 10 ----- 250 250 100 25 25 255 256 257 258 259 2” 2 1/2” 3” 3 1/2” 4” --2 2 ----- 10 10 10 6 6 Steel / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-I 251-I 252-I 253-I 254-I 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 10 ----- 250 250 100 25 25 255-I 256-I 257-I 258-I 259-I 2” 2 1/2” 3” 3 1/2” 4” --2 2 ----- 10 10 10 6 6 53 EMT FITTINGS Made in the USA Steel Compression Connectors Compression type steel connectors used to join EMT to box or enclosure. Concrete tight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-US 251-US 252-US 253-US 254-US 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 10 ----- 250 250 100 25 25 255-US 256-US 257-US 258-US 259-US 2” 2 1/2” 3” 3 1/2” 4” --2 2 ----- 10 10 10 6 6 Steel / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-USI 1/2” 251-USI 3/4” 252-USI 1” 253-USI 1 1/4” 254-USI 1 1/2” 25 25 10 ----- 250 250 100 25 25 255-USI 2” 256-USI 2 1/2” 257-USI 3” 258-USI 3 1/2” 259-USI 4” --2 2 ----- 10 10 10 6 6 54 EMT FITTINGS Raintight Compression Connectors Compression type connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-SRT 1/2” 251-SRT 3/4” 252-SRT 1” 253-SRT 1 1/4” 254-SRT 1 1/2” 25 25 10 ----- 250 250 100 25 25 255-SRT 2” 256-SRT 2 1/2” 257-SRT 3” 258-SRT 3 1/2” 259-SRT 4” --2 2 ----- 10 10 10 6 6 Steel / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-SRTI 251-SRTI 252-SRTI 253-SRTI 254-SRTI 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 25 10 ----- 250 250 100 25 25 255-SRTI 2” 256-SRTI 2 1/2” 257-SRTI 3” 258-SRTI 3 1/2” 259-SRTI 4” --2 2 ----- 10 10 10 6 6 Made in the USA Raintight Compression Connectors Compression type connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. *Note: USA Made Raintight Compression Connectors are NOT UL Listed. Steel Catalog Number Steel/Insulated Throat-105ºC Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-USRT 1/2” 251-USRT 3/4” 252-USRT 1” 253-USRT 1 1/4” 254-USRT 1 1/2” 255-USRT 2” 25 25 10 ------- 250 250 100 25 25 10 250-USRTI 251-USRTI 252-USRTI 253-USRTI 254-USRTI 255-USRTI 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 10 ------- 250 250 100 25 25 10 55 EMT Fittings Compression Couplings Compression type coupling used to join two lengths of EMT. Concrete-tight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260 261 262 263 264 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 20 10 ----- 250 200 100 25 25 265 266 267 268 269 2” 2 1/2” 3” 3 1/2” 4” --2 2 ----- 10 10 10 6 6 Raintight Compression Couplings Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Concrete-tight/Raintight. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260-SRT 1/2” 261-SRT 3/4” 262-SRT 1” 263-SRT 1 1/4” 264-SRT 1 1/2” 25 20 10 ----- 250 200 100 25 25 265-SRT 2” 266-SRT 2 1/2” 267-SRT 3” 268-SRT 3 1/2” 269-SRT 4” --2 2 ----- 10 10 10 6 6 Made in the USA Raintight Compression Couplings Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. *Note: USA Made Raintight Compression Connectors are NOT UL Listed. Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260-USRT 1/2” 261-USRT 3/4” 262-USRT 1” 25 20 10 250 250 100 263-USRT 1 1/4” 264-USRT 1 1/2” 265-USRT 2” ------- 25 10 10 56 EMT FITTINGS Made in the USA Steel Compression Couplings Compression type steel couplings used to join two lengths of EMT. File No. E24001 Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260-US 261-US 262-US 263-US 264-US 1/2” 3/4” 1” 1 1/4” 1 1/2” 25 20 10 ----- 250 200 100 25 25 265-US 266-US 267-US 268-US 269-US 2” 2 1/2” 3” 3 1/2” 4” --2 2 ----- 10 10 10 6 6 Compression Connectors Compression type connector used to join EMT to box or enclosure. 2 1/2” and larger suitable for aluminum or steel EMT and rigid. Concrete-tight. File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-DC2 1/2” 251-DC2 3/4” 252-DC2 1” 253-DC2 1 1/4” 254-DC2 1 1/2” 50 25 15 10 10 500 250 150 100 40 255-DC2 2” 256-DC2 2 1/2” 257-DC2 3” 258-DC2 3 1/2” 259-DC2 4” ----------- 10 12 12 6 6 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-DCI2 251-DCI2 252-DCI2 253-DCI2 254-DCI2 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 15 10 10 500 250 150 100 40 255-DCI2 2” 256-DCI2 2 1/2” 257-DCI2 3” 258-DCI2 3 1/2” 259-DCI2 4” ----------- 10 12 12 6 6 57 EMT FITTINGS Compression Couplings Compression type coupling used to join two lengths of EMT. 2 1/2” and larger zinc die cast are suitable for aluminum or steel EMT and rigid. Concrete-tight. File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260-DC 261-DC 262-DC 263-DC 264-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 15 10 10 500 250 150 100 40 265-DC 266-DC 267-DC 268-DC 269-DC 2” 2 1/2” 3” 3 1/2” 4” ----------- 10 12 12 6 6 Raintight Compression Connectors Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. File No. E24001 Patented. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-RT2 1/2” 251-RT2 3/4” 252-RT2 1” 253-RT2 1 1/4” 254-RT2 1 1/2” 50 25 15 10 10 500 250 150 100 40 255-RT2 2” 256-RT2 2 1/2” 257-RT2 3” 258-RT2* 3 1/2” 259-RT2* 4” ----------- 10 12 12 6 6 *Consult factory for availability. Zinc Die Cast / Insulated Throat - 90°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 250-RTI2 1/2” 251-RTI2 3/4” 252-RTI2 1” 253-RTI2 1 1/4” 254-RTI2 1 1/2” 50 25 15 10 10 500 250 150 100 40 255-RTI2 2” 256-RTI2 2 1/2” 257-RTI2 3” 258-RTI2* 3 1/2” 259-RTI2* 4” ----------- 10 12 12 6 6 58 *Consult factory for availability. EMT FITTINGS Raintight Compression Couplings Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. File No. E24001 Patented. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 260-RT 261-RT 262-RT 263-RT 264-RT 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 25 15 10 10 500 250 150 100 40 265-RT 2” 266-RT 2 1/2” 267-RT 3” 268-RT* 3 1/2” 269-RT* 4” ----------- 10 12 12 6 6 *Consult factory for availability. 90° Compression Connectors 90° compression type connector used to join EMT to box or enclosure. Concrete-tight. File No. E24001 Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 270-DC2 1/2” 20 100 270-DCI2 1/2” 20 100 59 EMT FITTINGS Set Screw Offset Nipple Connectors Set screw type connector used to join EMT to box or enclosure. Concrete-tight. 1620-DC2 has 3/8” offset; 1621-DC2 has 3/4” offset. File No. E24001 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 1620-DC2 1621-DC2 1/2” 3/4” 20 10 200 100 Combination Couplings Compression type for EMT; two-screw steel strap for flexible metal conduit. Malleable Iron 60 Catalog Number EMT Trade Size Flex Trade Size Unit Qty. Std. Pkg. Qty. 280 281 1/2” 1/2” 3/8” 1/2” 25 20 100 100 EMT FITTINGS Combination Couplings 280-DC 281-DC, 282-DC, 282-DCX, 283-DC Set screw type couplings used to join EMT to flexible metal conduit. 280-DC has steel strap. File No. E9391: 281-DC, 282-DC, 283-DC File No. E9391: 280-DC EMT to non-metallic sheath cable only. Zinc Die Cast Catalog Number EMT Trade Size Flex Trade Size Unit Qty. Std. Pkg. Qty. 280-DC 281-DC 282-DC 282-DCX 283-DC 1/2” 1/2” 3/4” 3/4” 1” 3/8” 1/2” 3/4” 1/2” 1” 25 25 25 25 10 100 250 100 100 100 Combination Couplings Zinc Die Cast Steel Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/ Robertson head screws. File No. E9391: 290-S thru 292-S Zinc Die Cast Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 290-DC 291-DC 292-DC 1/2” 3/4” 1” 50 25 25 200 100 100 290-S 291-S 292-S 1/2” 3/4” 1” 25 25 10 100 100 50 61 EMT FITTINGS Combination Couplings Coupling used to join EMT to rigid or IMC. Coupling internally threaded for rigid / IMC. Compression type for EMT. Concrete-tight. File No. E9391: 292-MS Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 290-MS 291-MS 292-MS 1/2” 3/4” 1” 25 25 10 100 100 50 Combination Couplings Coupling used to join EMT to flexible metal conduit. Screw-in end for flex. Compression end for EMT. File No. E9391, also 581-DC UL listed for use with XRWFMC. Zinc Die Cast 62 Catalog Number Trade Size Unit Qty. Std. Pkg. 581-DC 582-DC 583-DC 1/2” 3/4” 1” 50 25 10 500 250 100 EMT FITTINGS Combination Couplings Coupling used to join duplex 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or 3/8” flexible metal conduit to 3/4” EMT. Set screw type transitional fitting ideal for commercial and institutional facilities. A labor savings, compared to the traditional junction box installation. Simply remove the armor and expose the length of conductors to reach the device box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented. File No. E20534 Zinc Die Cast Catalog Number Trade Size 4157-DC 3/8”- 3/4” Unit Qty. Std. Pkg. 25 100 Combination Couplings Coupling used to join either metallic or nonmetallic (Type “B”) liquid tight to EMT. Concrete-tight. UL listed “Raintight” File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 4360-DC 4361-DC 1/2” 3/4” 25 10 100 50 63 EMT FITTINGS One Hole EMT Straps Steel Malleable To support EMT to mounting surface. File No. E161206 (924-S & 925-S) File No. LR39354: 920-S & 921-S Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 920 921 922 923 924 925 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 50 50 ------- 1000 500 500 100 100 50 907 908 909 910 2 1/2” 3” 3 1/2” 4” --------- 25 10 10 10 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 920-S 921-S 922-S 923-S 924-S 925-S 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 50 ------- 1000 500 500 100 100 50 907-S 908-S 909-S 910-S 2 1/2” 3” 3 1/2” 4” --------- 25 25 10 10 EMT Nail Straps Nail type strap to support EMT to mounting surface. Zinc Plated Steel 64 Catalog Number Trade Size Unit Qty. Std. Pkg. 920-NS 921-NS 922-NS 1/2” 3/4” 1” 100 100 100 1000 1000 1000 EMT FITTINGS Clamp Backs Provides space between conduit and mounting surface. For use with malleable straps. Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 941 942 943 944 945 1/2” 3/4” 1” 1 1/4” 1 1/2” 50 50 25 20 10 250 250 100 100 100 946 947 948 949 950 2” 2 1/2” 3” 3 1/2” 4” 5 2 2 ----- 50 10 10 5 5 Two Hole Pipe Straps To support EMT to mounting surface. File No. E161206: 1907 thru 1910 File No. LR39354 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 1907 1908 1909 1910 2 1/2” 3” 3 1/2” 4” 25 20 15 10 100 80 60 40 1920 1921 1922 1923 1924 1925 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 250 200 100 50 50 25 2500 2000 1000 500 500 250 65 EMT FITTINGS Insulating Bushings EMT bushing insulates telephone, computer, video and other low voltage wiring from sharp edges of EMT. Polyethylene - 90°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. TWB-51 1/2” TWB-52 3/4” TWB-53 1” TWB-54 1 1/4” TWB-55 1 1/2” 100 50 25 25 --- 1000 500 250 250 100 TWB-56 2” TWB-57 2 1/2” TWB-58 3” TWB-59 3 1/2” TWB-60 4” ----------- 50 25 25 25 25 Steel Expansion Couplings for EMT Low cost and easy to use. Assembles like a regular EMT set screw coupling. Use to compensate plus or minus 2” lateral movement of conduit in dry locations. Available for use with trade size 3/4” thru 4” steel EMT. To install simply slide coupling end stop onto fixed end of EMT and tighten set screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. May be used with optional Bonding Jumper Assembly cat. nos. BJ-100, BJ-200 and BJ-400. (see page 157) US Patent 6,715,803,B1 File No. E24001 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. EC-075 EC-100 EC-125 EC-150 EC-200 3/4” 1” 1 1/4” 1 1/2” 2” 15 10 8 6 --- 60 40 40 30 4 EC-250 EC-300 EC-350 EC-400 2 1/2” 3” 3 1/2” 4” --------- 1 1 1 1 2-1/2” thru 4” suitable for use with EMT or rigid conduit. 66 EMT Conduit Bodies Type C Set Screw Type Allows access to the interior of a conduit system for inspection, pulling and maintenance. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. C-31 C-32 C-33 C-34 C-35 1/2” 3/4” 1” 1 1/4” 1 1/2” 10 10 5 2 2 60 60 30 10 10 Catalog Number Trade Size Unit Qty. Std. Pkg. C-36 2” C-37CG* 2 1/2” C-38CG* 3” C-39CG* 3 1/2” C-40CG* 4” 1 --------- 6 1 1 1 1 *Provided with cover and neoprene gasket. Combination Type C Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. C-41CGC C-42CGC C-43CGC 1/2” 3/4” 1” 10 10 5 60 60 30 Catalog Number Trade Size C-44CGC 1 1/4” C-45CGC 1 1/2” C-46CGC 2” Unit Qty. Std. Pkg. 2 2 1 10 10 6 67 EMT Conduit Bodies Type LB Set Screw Type Allows access to the interior of a conduit system for inspection, pulling and maintenance. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LB-31 LB-32 LB-33 LB-34 LB-35 1/2” 3/4” 1” 1 1/4” 1 1/2” 10 10 5 2 2 60 60 30 10 10 Catalog Number Trade Size Unit Qty. Std. Pkg. LB-36 LB-37 LB-38 LB-39 LB-40 2” 2 1/2” 3” 3 1/2” 4” 1 --------- 6 1 1 1 1 Combination Type LB Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. LB-41CGC 1/2” LB-42CGC 3/4” LB-43CGC 1” 10 10 5 60 60 30 68 Catalog Number Trade Size LB-44CGC 1 1/4” LB-45CGC 1 1/2” LB-46CGC 2” Unit Qty. Std. Pkg. 2 2 1 10 10 6 EMT Conduit Bodies Type LL Set Screw Type Allows access to the interior of a conduit system for inspection, pulling and maintenance. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LL-31 LL-32 LL-33 1/2” 3/4” 1” 10 10 5 60 60 30 Catalog Number Trade Size Unit Qty. Std. Pkg. LL-34 LL-35 LL-36 1 1/4” 1 1/2” 2” 2 2 1 10 10 6 Combination Type LL Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. LL-41CGC 1/2” LL-42CGC 3/4” LL-43CGC 1” 10 10 5 60 60 30 Catalog Number Trade Size LL-44CGC 1 1/4” LL-45CGC 1 1/2” LL-46CGC 2” Unit Qty. Std. Pkg. 2 2 1 10 10 6 69 EMT Conduit Bodies Combination Type LL/LR Combination type LL/LR style. Units have a threaded interior for use with rigid or IMC as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors Combination Type LL/LR Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. LLR-41 LLR-42 LLR-43 1/2” 3/4” 1” 10 10 5 60 60 30 LLR-44 LLR-45 LLR-46 1 1/4” 1 1/2” 2” 2 2 --- 10 10 5 Type LR Set Screw Allows access to the interior of a conduit system for inspection, pulling and maintenance. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LR-31 LR-32 LR-33 1/2” 3/4” 1” 10 10 5 60 60 30 70 Catalog Number Trade Size Unit Qty. Std. Pkg. LR-34 LR-35 LR-36 1 1/4” 1 1/2” 2” 2 2 1 10 10 6 EMT Conduit Bodies Combination Type LR Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. LR-41CGC LR-42CGC LR-43CGC 1/2” 3/4” 1” 10 10 5 60 60 30 Catalog Number Trade Size Unit Qty. Std. Pkg. LR-44CGC LR-45CGC LR-46CGC 1 1/4” 1 1/2” 2” 2 2 1 10 10 6 Type T Set Screw Allows access to the interior of a conduit system for inspection, pulling and maintenance. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. T-31 T-32 T-33 1/2” 3/4” 1” 10 10 5 60 60 30 Catalog Number Trade Size Unit Qty. Std. Pkg. T-34 T-35 T-36 1 1/4” 1 1/2” 2” 2 2 1 10 10 6 Unit Qty. Std. Pkg. 2 2 1 10 10 6 Combination Type T Units have a threaded interior for use with rigid as well as set screws for use with EMT. Preassembled with cover and gasket. File No. E11077 Listed Raintight when used with rigid conduit or raintight compression connectors. Aluminum with Cover and Gasket Catalog Number Trade Size Unit Qty. Std. Pkg. T-41CGC T-42CGC T-43CGC 1/2” 3/4” 1” 10 10 5 60 60 30 Catalog Number Trade Size T-44CGC 1 1/4” T-45CGC 1 1/2” T-46CGC 2” 71 EMT Conduit Bodies Conduit Body Covers Encloses conduit body; supplied with screws. File No. E11077 Aluminum Catalog Number Trade Size SC-41 1/2” SC-42 3/4” SC-43 1” SC-44 1 1/4”-1 1/2” SC-46 2” SC-47 2 1/2”-3” SC-49 3 1/2”-4” Unit Qty. Std. Pkg. 25 25 25 10 ------- 100 100 100 100 25 20 5 Conduit Body Gaskets SG series provides dust tight seal between conduit body and cover. SGN series provides both dust and rain-tight protection. SGN gaskets are impervious to most liquids and oil. Cellulose Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. SG-61 1/2” 100 SG-62 3/4” 100 SG-63 1” 50 SG-64 11/4”-11/2” --- 1000 1000 500 100 SG-66 SG-67 SG-69 2” 2 1/2”-3” 3 1/2”-4” ------- 100 100 25 Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. SGN-61 1/2” 100 SGN-62 3/4” 100 SGN-63 1” 50 SGN-64 11/4”-11/2” --- 1000 1000 500 100 SGN-66 2” SGN-67 2 1/2”-3” SGN-69 3 1/2”-4” ------- 100 100 25 Neoprene Catalog Number 72 Trade Size Liquid Tight Fittings Liquid Tight Connectors, Straight & 90° 429-NMLT 470-NMLT Nonmetallic straight and 90° connectors for use with nonmetallic “Type B” liquid tight conduit. File No. E9391 Straight Non-Metallic 90° Non-Metallic Catalog Number Unit Std. Qty. Pkg. Catalog Number 25 25 10 5 5 2 2 469-NMLT 3/8” 470-NMLT 1/2” 471-NMLT 3/4” 472-NMLT 1” 473-NMLT 1 1/4” 474-NMLT 1 1/2” 475-NMLT 2” Trade Size 429-NMLT 3/8” 430-NMLT 1/2” 431-NMLT 3/4” 432-NMLT 1” 433-NMLT 1 1/4” 434-NMLT 1 1/2” 435-NMLT 2” 100 100 50 25 25 10 10 Trade Size Unit Std. Qty. Pkg. 25 25 10 5 2 2 2 100 100 50 25 10 10 10 Screw-On Liquid Tight Connectors, Straight & 90° 430-NMLTS 470-NMLTS Nonmetallic straight and 90° connectors for use with nonmetallic “Type B” liquid tight conduit. Connectors simply screw onto conduit. No tools required! File No. E9391 Straight Non-Metallic Catalog Number 90° Non-Metallic Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 430-NMLTS 1/2” 431-NMLTS 3/4” 25 25 100 100 470-NMLTS 1/2” 471-NMLTS 3/4” 10 10 100 100 73 Liquid Tight Fittings Liquid Tight Connectors, Straight Straight connector for use with metallic and non-metallic “Type B” liquid tight conduit. File No. E9391 File No. LR39354 Zinc Die Cast / Insulated Throat - 105°C Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 429-LT2 430-LT2 431-LT2 432-LT2 433-LT2 434-LT2 435-LT2 436-LT2 437-LT2 438-LT2 439-LT2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 429-LTI2 430-LTI2 431-LTI2 432-LTI2 433-LTI2 434-LTI2 435-LTI2 436-LTI2 437-LTI2 438-LTI2 439-LTI2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 25 25 10 5 5 2 2 1 1 1 1 100 100 50 25 20 10 20 5 5 5 5 74 Liquid Tight Fittings Liquid Tight Connectors, Straight Steel Malleable Straight connector for use with metallic liquid tight conduit. File No. E9391: Steel File No. E191572: 436-SLT thru 439-SLT File No. LR39354: Steel *Note: UL Listing not applicable to 5” & 6” Malleable Iron. Steel / Insulated Throat - 105°C Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 429-SLT 3/8” 430-SLT 1/2” 431-SLT 3/4” 432-SLT 1” 433-SLT 1 1/4” 434-SLT 1 1/2” 435-SLT 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 429-SLTI 3/8” 430-SLTI 1/2” 431-SLTI 3/4” 432-SLTI 1” 433-SLTI 1 1/4” 434-SLTI 1 1/2” 435-SLTI 2” 25 25 10 5 5 2 2 100 100 50 25 20 10 20 Malleable Iron / Insulated Throat - 105°C Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. 436-SLT 2 1/2” 437-SLT 3” 438-SLT 3 1/2” 439-SLT 4” 440-SLT 5” 441-SLT 6” 1 1 1 1 ----- 5 5 5 5 2 1 Catalog Number Trade Size Unit Qty. Std. Pkg. 436-SLTI 2 1/2” 437-SLTI 3” 438-SLTI 3 1/2” 439-SLTI 4” 440-SLTI 5” 441-SLTI 6” 1 1 1 1 ----- 5 5 5 5 2 1 75 Liquid Tight Fittings Liquid Tight Connectors with Grounding Lug, Straight Straight liquid tight connectors with grounding lug for use with metallic liquid tight conduit. File No. E9391 File No. LR39354 Steel with Aluminum Lug Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 429-SLTG 430-SLTG 431-SLTG 432-SLTG 3/8” 1/2” 3/4” 1” 25 25 25 10 125 125 125 50 433-SLTG 434-SLTG 435-SLTG 1 1/4” 1 1/2” 2” 5 5 2 25 25 10 Unit Std. Qty. Pkg. Steel with Aluminum Lug/ Insulated Throat - 105°C Catalog Number 429-SLTIG 430-SLTIG 431-SLTIG 432-SLTIG 76 Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size 3/8” 1/2” 3/4” 1” 25 25 25 10 125 125 125 50 433-SLTIG 434-SLTIG 435-SLTIG 1 1/4” 1 1/2” 2” 5 5 2 25 25 10 Liquid Tight Fittings Liquid Tight Connectors, 45° 45° connector for use with metallic liquid tight conduit. File No. E9391 File No. LR39354 Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 449-SLT 3/8” 450-SLT 1/2” 451-SLT 3/4” 452-SLT 1” 453-SLT 1 1/4” 454-SLT 1 1/2” 25 25 10 5 5 2 100 100 50 25 25 10 455-SLT 2” 456-SLT 2 1/2” 457-SLT 3” 458-SLT 3 1/2” 459-SLT 4” 1 --------- 5 1 1 1 1 Malleable Iron Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 449-SLTI 3/8” 450-SLTI 1/2” 451-SLTI 3/4” 452-SLTI 1” 453-SLTI 1 1/4” 454-SLTI 1 1/2” 25 25 10 5 5 2 100 100 50 25 25 10 455-SLTI 2” 456-SLTI 2 1/2” 457-SLTI 3” 458-SLTI 3 1/2” 459-SLTI 4” 1 --------- 5 1 1 1 1 77 Liquid Tight Fittings Liquid Tight Connectors, 90° 90° connector for use with metallic and nonmetallic “Type B” liquid tight conduit. File No. E9391 File No. LR39354 Die Cast Zinc / Insulated Throat - 105°C Die Cast Zinc Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 469-LT2 3/8” 470-LT2 1/2” 471-LT2 3/4” 472-LT2 1” 473-LT2 1 1/4” 25 25 10 5 5 100 100 50 25 25 469-LTI2 3/8” 470-LTI2 1/2” 471-LTI2 3/4” 472-LTI2 1” 473-LTI2 1 1/4” 25 25 10 5 5 100 100 50 25 25 Cast Zinc / Insulated Throat - 105°C Cast Zinc Catalog Number Trade Size Unit Qty. Std. Pkg. 474-LT2 1 1/2” 475-LT2 2” 476-LT2 2 1/2” 477-LT2 3” 478-LT2 3 1/2” 479-LT2 4” 2 ----------- 10 5 1 1 1 1 78 Catalog Number Trade Size Unit Qty. Std. Pkg. 474-LTI2 1 1/2” 475-LTI2 2” 476-LTI2 2 1/2” 477-LTI2 3” 478-LTI2 3 1/2” 479-LTI2 4” 2 ----------- 10 5 1 1 1 1 Liquid Tight Fittings Liquid Tight Connectors, 90° Malleable Iron Steel 90° connector for use with metallic liquid tight conduit. File No. E9391: Steel File No. E191572: 476-SLT thru 479-SLT, -SLTI File No. LR39354: Steel Steel / Insulated Throat - 105°C Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 469-SLT 3/8” 470-SLT 1/2” 471-SLT 3/4” 472-SLT 1” 473-SLT 1 1/4” 474-SLT 1 1/2” 475-SLT 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 469-SLTI 3/8” 470-SLTI 1/2” 471-SLTI 3/4” 472-SLTI 1” 473-SLTI 1 1/4” 474-SLTI 1 1/2” 475-SLTI 2” 25 25 10 5 5 2 --- 100 100 50 25 25 10 5 Malleable Iron / Insulated Throat - 105°C Malleable Iron Catalog Number Trade Size Unit Qty. Std. Pkg. 476-SLT 2 1/2” 477-SLT 3” 478-SLT 3 1/2” 479-SLT 4” --------- 1 1 1 1 Catalog Number Trade Size Unit Qty. Std. Pkg. 476-SLTI 2 1/2” 477-SLTI 3” 478-SLTI 3 1/2” 479-SLTI 4” --------- 1 1 1 1 79 Liquid Tight Fittings Liquid Tight Connectors with Grounding Lug, 90° Steel with Aluminum Lug 90° liquid tight connectors with grounding lug for use with metallic liquidtight conduit. File No. E9391 File No. LR39354 Steel with Aluminum Lug Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 469-SLTG 470-SLTG 471-SLTG 472-SLTG 3/8” 1/2” 3/4” 1” 20 20 10 5 100 100 50 25 473-SLTG 474-SLTG 475-SLTG 1 1/4” 1 1/2” 2” 4 3 2 20 15 10 Steel with Aluminum / Insulated Throat - 105°C Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size 469-SLTIG 470-SLTIG 471-SLTIG 472-SLTIG 3/8” 1/2” 3/4” 1” 20 20 10 5 100 100 50 25 473-SLTIG 474-SLTIG 475-SLTIG 1 1/4” 1 1/2” 2” 80 Unit Std. Qty. Pkg. 4 3 2 20 15 10 Liquid Tight Fittings Combination Couplings Coupling used to join either metallic or nonmetallic “Type B” liquid tight to EMT. Concrete-tight. UL listed “Raintight”. File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 4360-DC 4361-DC 1/2” 3/4” 25 10 100 50 Liquid Tight Sealing Rings Provides liquid tight sealing with connector to box or enclosure. Polyethylene With Steel Retainer Catalog Number Trade Size Unit Qty. Std. Pkg. SR-050 SR-075 SR-100 SR-125 SR-150 SR-200 SR-250 SR-300 SR-350 SR-400 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 --------- 400 400 400 200 200 200 5 5 5 5 81 Portable Cord Connectors PVC “Snap-In” Type Connectors For connecting portable cord to box or enclosure. Locknut not required. File No. E11698 File No. LR74878 PVC Catalog Number K.O. Size Cord Range Unit Qty. Std. Pkg. Qty. 620-NM 1/2” 50 500 621-NM 3/4” 19/64 to 19/32 or two cords 19/64 1/2 to 27/32 25 250 Two Screw, Strap Type Connectors 650-DC2 650-HD2 For connecting SJO cord to box or enclosure. Also listed for NM-B cable - see Nonmetallic Cable section. The 650HD2 connector has a die cast strap for heavy duty use. File No. E11698 Zinc Die Cast 82 Catalog Number K.O. Size Cord Range Unit Qty. Std. Pkg. Qty. 650-DC2 650-HD2 1/2” 1/2” 18/3 to 12/3 16/2 to 14/3 100 100 1000 1000 Portable Cord Connectors Single Screw, Strap Type Connectors For connecting SJO cord to box or enclosure. Also listed for NM-B cable - see Nonmetallic Cable section. US Patent D473-7835. File No. E11698 Zinc Die Cast Catalog Number K.O. Size Cord Range Unit Qty. Std. Pkg. Qty. 651-DC2 3/8” 18/3 to 12/3 100 1000 Whipper-Snap® Single Screw, Strap Type Connector For connecting SJO cord to box or enclosure. Also listed for NM-B cable - see Nonmetallic Cable section. Simply snap connector into electrical box. External spring steel locking tabs secures connector to electrical box. Patented Whipper-Snap design. File No. E11698 Zinc Die Cast Catalog Number K.O. Size Cord Range Unit Qty. Std. Pkg. Qty. 651-SP 3/8” 18/3 to 12/3 100 1000 83 Portable Cord Connectors Steel Cord Grip Connectors, Straight. Bridgeport's line of high quality, made in the USA, cord grip fittings is the electrician's smart choice. Each fitting is identified by a color coded grommet that clearly indicates the minimum-maximum cable diameter range for which the connector can be used. Bridgeport's cord grips meet the requirements of rugged service Steel Catalog Number Size Cable Ranges Min. Max CG770-250 1/2" .150 .250 CG770-350 1/2" .250 .350 CG770-450 1/2" .350 .450 CG770-560 CG770-650 1/2" 1/2" .450 .550 .550 .650 CG771-250 3/4" .150 .250 CG771-350 3/4" .250 .350 CG771-450 3/4" .350 .450 CG771-560 3/4" .450 .550 CG771-650 3/4" .550 .650 CG771-750 3/4" .650 .750 CG771-850 3/4" .750 .850 CG772-560 1" .450 .550 CG772-650 1" .550 .650 CG772-750 1" .650 .750 CG772-850 1" .750 .850 CG772-950 1" .850 .950 CG772-1050 1" .950 1.050 84 For Types S, SO, ST & STO 18-2, 3, 4 16-2, 2, 4 18-5, 6, 7 16-5, 6 14-2, 3 18-8, 10 16-7, 8 14-4 12-2, 3 10-2 18-2, 3, 4 16-2, 3, 4 18-5, 6, 7 16-5,6 14-2, 3 18-8,10 16-7, 8 14-4 12-2, 3 10-2 18-12,14 16-10,12 14-5, 6, 7 12-4, 5 10-3, 4 8-2 18-16,18, 20 16-14, 16, 18 14-8 12-6, 7, 8 10-5 8-3, 4 6-2 18-5, 6, 7 16-5, 6 14-2, 3 18-8, 10 16-7, 8 14-4 12-2, 3 10-2 18-2,14 16-10,12 14-5, 6, 7 12-4, 5 10-3, 4 8-2 18-16,18,20 16-14, 16, 18 14-8 12-6, 7, 8 10-5 8-3, 4 6-2 18-22, 24, 26 16-20, 22, 24 14-10, 12 10-6, 7, 8 6-3, 4 18-30 16-26 14-14, 16 12-10 4-3 Portable Cord Connectors on all types of equipment, in all non-hazardous areas. Our 105°C rated neoprene sealing grommets grip the cable jacket firmly but safely providing strain relief and protecting the internal wiring connections from tension on the cable or cord. The steel washer reduces friction between the grommet and the compression nut to provide even pressure distribution, eliminating leakage resulting from grommet distortion. File No. E11259 For Types SJ, STO, SJT SJTO, SVO, & BUS DROP Color Unit Qty. Std. Pkg. Qty. Red 25 250 White 25 250 Blue Green 25 25 250 250 Beige Red 25 10 250 100 White 10 1000 Blue 10 100 Green 10 100 Beige 10 100 8-3 BUS DROP Yellow 10 100 6-3 BUS DROP Purple 5 50 12-3 SJO 12-3 & 10-3 BUS DROP Green 5 50 Beige 5 50 8-3 BUS DROP Yellow 5 50 6-3 BUS DROP Purple 5 50 4-3 BUS DROP Gray 5 50 Black 5 50 18-2, 3 SVO 18-2, 3 SJT 18-2, 3, 4 SJO 16-2, 3, SJO 16-4 SJO14-2,3,4 SJO 12-2550 14-3 BUS DROP 12-3 SJO 12-3 & 10-3 BUS DROP 18-2 & 3 SVO 18-2,3 SJT 18-2,3,4 SJO 16-2,3 SJO 16-4SJO 14-2, 3, 4 SJO 12-2 SJO 14-3 BUS DROP 12-3 SJO 12-3 & 10-3 BUS DROP 85 Portable Cord Connectors Steel Cord Grip Connectors, Straight Continued... Steel Catalog Number Size Cable Ranges Min. Max CG773-850 1 1/4" .750 .850 CG773-950 1 1/4" .850 .950 CG773-1050 1 1/4" .950 1.050 CG773-1150 1 1/4" 1.050 1.150 CG773-1250 1 1/4" 1.150 1.250 CG773-1375 1 1/4" 1.250 1.375 CG774-1050 1 1/2" 0.950 1.050 CG774-1150 1 1/2" 1.050 1.150 CG774-1250 1 1/2" 1.150 1.250 CG774-1375 1 1/2" 1.250 1.375 86 For Types S, SO, ST & STO 18-16,18,20 16-14,16,18 14-8 12-6,7,8 10-5 8-3,4 6-2 18-22,24,26 16-20, 22, 24 14-10,12 10-6,7, 6-3,4 18-30 16-26 14-14,16 12-10 4-3 18-36,40 16-30,36 14-18,20 12-12,14 10-10 4-4 16-40 14-22 12-16,18 10-12,14 2-3 14-24,26,30 12-20 10-16 2-4 18-30 16-26 14-14,16 12-10 4-3 18-36,40 16-30,36 14-18,20 12-12,14 10-10 4-4 16-40 14-22 12-16,18 10-12,14 2-3 12-24,26,30 12-20 10-16 2-4 Portable Cord Connectors For Types SJ, STO, SJT SJTO, SVO, & BUS DROP Color Unit Qty. Std. Pkg. Qty. 6-3 BUS DROP Purple 5 25 4-3 BUS DROP Grey 5 25 – Black 5 25 2-3 BUS DROP Orange 5 25 – Red 5 25 – White 5 25 – Black 2 20 2-3 BUS DROP Orange 2 20 – Red 2 20 – White 2 20 87 Portable Cord Connectors Aluminum Cord Grip Connectors, Straight. Bridgeport's line of high quality, made in the USA, cord grip fittings is the electrician's smart choice. Each fitting is identified by a color coded grommet that clearly indicates the minimummaximum cable diameter range for which the connector can be used. Bridgeport's cord grips meet the requirements of rugged Aluminum Catalog Number Size Cable Ranges Min. Max CGA770250 1/2" .150 .250 CGA770350 1/2" .250 .350 CGA770450 1/2" .350 .450 CGA770560 CGA770650 1/2" 1/2" .450 .550 .550 .650 CGA771250 3/4" .150 .250 CGA771350 3/4" .250 .350 CGA771450 3/4" .350 .450 CGA771560 3/4" .450 .550 CGA771650 3/4" .550 .650 CGA771750 3/4" .650 .750 CGA771850 3/4" .750 .850 CGA772560 1" .450 .550 CGA772650 1" .550 .650 CGA772750 1" .650 .750 CGA772850 1" .750 .850 CGA772950 1" .850 .950 CGA7721050 1" .950 1.050 88 For Types S, SO, ST & STO 18-2, 3, 4 16-2, 2, 4 18-5, 6, 7 16-5, 6 14-2, 3 18-8, 10 16-7, 8 14-4 12-2, 3 10-2 18-2, 3, 4 16-2, 3, 4 18-5, 6, 7 16-5,6 14-2, 3 18-8,10 16-7, 8 14-4 12-2, 3 10-2 18-12,14 16-10,12 14-5, 6, 7 12-4, 5 10-3, 4 8-2 18-16,18,20 16-14, 16, 18 14-8 12-6, 7, 8 10-5 8-3, 4 6-2 18-5, 6, 7 16-5, 6 14-2, 3 18-8, 10 16-7, 8 14-4 12-2, 3 10-2 18-2,14 16-10,12 14-5, 6, 7 12-4, 5 10-3, 4 8-2 18-16,18, 20 16-14, 16, 18 14-8 12-6, 7, 8 10-5 8-3, 4 6-2 18-22, 24, 26 16-20, 22, 24 14-10, 12 10-6, 7, 8 6-3, 4 18-30 16-26 14-14, 16 12-10 4-3 Portable Cord Connectors service on all types of equipment, in all non-hazardous areas. Our 105°C rated neoprene sealing grommets grip the cable jacket firmly but safely providing strain relief and protecting the internal wiring connections from tension on the cable or cord. The washer reduces friction between the grommet and the compression nut to provide even pressure distribution, eliminating leakage resulting from grommet distortion. File No. E11259 For Types SJ, STO, SJT SJTO, SVO, & BUS DROP Color Unit Qty. Std. Pkg. Qty. Red 25 250 White 25 250 Blue Green 25 25 250 250 Beige Red 25 10 250 100 White 10 1000 Blue 10 100 Green 10 100 Beige 10 100 8-3 BUS DROP Yellow 10 100 6-3 BUS DROP Purple 5 50 12-3 SJO 12-3 & 10-3 BUS DROP Green 5 50 Beige 5 50 8-3 BUS DROP Yellow 5 50 6-3 BUS DROP Purple 5 50 4-3 BUS DROP Gray 5 50 Black 5 50 18-2, 3 SVO 18-2, 3 SJT 18-2, 3, 4 SJO 16-2, 3, SJO 16-4 SJO14-2,3,4 SJO 16-2, 3 SJO 12-3 SJO 12-3 & 10-3 BUS DROP 18-2 &3 SVO 18-2,3 SJT 18-2,3,4 SJO 16-2,3 SJO 16-4SJO 14-2, 3, 4 SJO 12-2 SJO 14-3 BUS DROP 12-3 SJO 12-3 & 10-3 BUS DROP 89 Portable Cord Connectors Cord Grip Connectors, Straight Straight connector for use with any flexible cord. Provides liquid tight, watertight protection. Tapered (NPT) threads. Furnished with polyethylene knockout gasket and locknut. File No. E11259 File No. LR39354 Zinc Die Cast Catalog Number K.O. Size Cord Range Locking Ring Color Unit Qty. Std. Pkg. Qty. 770-22 770-32 770-42 770-52 770-62 770-72 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” .125” - .187” .187” - .250” .250” - .375” .375” - .500” .500” - .625” .625” - .750” Orange Red White Blue Beige Yellow 25 25 25 25 25 25 100 100 100 100 100 100 771-32 771-42 771-52 771-62 3/4” 3/4” 3/4” 3/4” .250” - .375” .375” - .500” .500” - .625” .625” - .750” White Blue Beige Yellow 10 10 10 10 50 50 50 50 772-32 772-42 772-52 772-62 1” 1” 1” 1” .500” - .625” .625” - .750” .750” - .875” .875” - 1.000” Beige Yellow Purple Gray 5 5 5 5 25 25 25 25 90 Flexible Metal Conduit Fittings Screw-In Connectors, 90° Used to connect flexible metal conduit to box or enclosure. Sliding cover facilitates wire pulling and inspection. File No. E9391. Also, 91-DC2 UL listed for use with XRWFMC. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 91-DC2 92-DC2 93-DC2 1/2” 3/4” 1” 25 15 10 250 150 100 Combination Couplings Coupling used to join EMT to flexible metal conduit. Screw-in end for flex. Compression end for EMT. File No. E9391, also 581-DC UL listed for use with XRWFMC. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 581-DC 582-DC 583-DC 1/2” 3/4” 1” 50 25 10 500 250 100 91 Flexible Metal Conduit Fittings Combination Couplings 280-DC 281-DC, 282-DC, 282-DCX, 283-DC 280 & 281 Set screw type couplings 280-DC, 281-DC, 282-DC, 282-DCX & 283-DC used to join EMT to flexible metal conduit. 280-DC has steel strap. Compression type, two-screw steel strap for flexible metal conduit: 280 & 281. File No. E9391: 281-DC, 282-DC, 283-DC File No. E9391: 280-DC EMT to nonmetallic sheath cable only. Malleable Iron Catalog Number EMT Trade Size Flex Trade Size Unit Qty. Std. Pkg. Qty. 280 281 1/2” 1/2” 3/8” 1/2” 25 20 100 100 Zinc Die Cast 92 Catalog Number EMT Trade Size Flex Trade Size Unit Qty. Std. Pkg. Qty. 280-DC 281-DC 282-DC 282-DCX 283-DC 1/2” 1/2” 3/4” 3/4” 1” 3/8” 1/2” 3/4” 1/2” 1” 25 25 25 25 10 100 250 100 100 100 Flexible Metal Conduit Fittings Squeeze Connectors 403 thru 412 414 thru 418 419 and 420 To connect flexible metal conduit to box or enclosure. File No. E9391 File No. LR39354: 407 thru 418 Malleable Iron Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 403 407 408 410 412 414 416 417 418 419 420 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 50 25 ----------------- 500 200 100 25 25 10 10 5 5 5 5 Malleable Iron / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 407-I 408-I 410-I 412-I 414-I 416-I 417-I 418-I 419-I 420-I 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 25 5 5 2 2 1 1 1 1 200 100 25 25 10 10 5 5 5 5 93 Flexible Metal Conduit Fittings Squeeze Connectors 403-DC2 1/2” thru 2” 2 1/2” thru 4” To connect flexible metal conduit to box or enclosure. File No. E9391 File No. No. LR39354: 407-DC2 & 408-DC2 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 403-DC2 407-DC2 408-DC2 410-DC2 412-DC2 414-DC2 416-DC2 417-DC2 418-DC2 419-DC2 420-DC2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 50 50 25 10 10 5 ----------- 500 200 100 100 100 50 10 5 5 5 5 Zinc Die Cast / Insulated Throat - 105°C 94 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 407-DCI2 408-DCI2 410-DCI2 412-DCI2 414-DCI2 416-DCI2 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 50 25 10 10 5 --- 200 100 100 100 50 10 Flexible Metal Conduit Fittings Set Screw Connectors 507-DC2 USL-120 The 507 and 508 series are straight set screw type fittings used to connect flexible metal (steel) conduit to box or enclosure. The USL-120 is for use with extra flexible steel conduit and is UL and CSA recognized for use with listed or certified subassemblies. File No. E9391 (507 and 508 series) File No. LR39354 (507 and 508 series) Zinc Die Cast Catalog Number Trade Size 507-DC2 1/2” 508-DC2 3/4” USL-120 .645”-.675” K.O. Size Unit Qty. Std. Pkg. Qty. 1/2” 3/4” 1/2” 50 25 100 500 250 1000 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 507-DCI2 508-DCI2 1/2” 3/4” 1/2” 3/4” 50 25 500 250 95 Flexible Metal Conduit Fittings Whipper-Snap® Snap-In Two Screw-Type Connector Used to connect 3/8” steel or aluminum flexible metal conduit to box or enclosure. Rectangular opening. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E9391 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 84OSP 3/8” 1/2” 100 1000 Screw-In Connectors, Snap-In Low profile connector for connecting aluminum or steel flexible metal conduit to box or enclosure. Spring steel locking tabs eliminate need for a locknut. Suitable for flexible whips. File No. E9391 Spring Steel 96 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 540-SS 3/8” 1/2” --- 2500 Flexible Metal Conduit Fittings Screw-In Connectors For connecting flexible metal conduit to box or enclosure. File No. E9391, also 520-DC2, -DCI2 are UL listed for use with XRWFMC. File No. No. LR39354: 519 thru 521 -DC2 & -DCI2 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 519-DC2 520-DC2 521-DC2 522-DC2 523-DC2 524-DC2 525-DC2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 50 25 10 5 3 1000 1000 500 250 100 50 30 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 519-DCI2 520-DCI2 521-DCI2 522-DCI2 523-DCI2 524-DCI2 525-DCI2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 50 25 10 5 3 1000 1000 500 250 100 50 30 97 Flexible Metal Conduit Fittings Whipper-Snap® Screw-in Connectors For connecting flexible metal conduit to box or enclosure. Screw connector into conduit and snap into electrical box. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. GF38SP GF50SP 3/8” 1/2” 1/2” 1/2” 100 100 1000 1000 Screw-In Couplings Used to join two lengths of flexible metal conduit. File No. E9391, also 530-DC UL listed for use with XRWFMC. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 530-DC 531-DC 532-DC 533-DC 534-DC 535-DC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 50 50 10 10 5 3 500 500 100 100 50 30 Multi-Purpose Connector Two Screw, Strap Type Used to connect 14/2 to 12/2 nonmetallic sheath cable (NM-B), steel/aluminum 14/2 to 12/2 armored cable (AC), or metal clad (MC) cable, or steel/aluminum 3/8” flexible metal conduit to 1/4” knockout. Will fit 1/4” knockouts with flats, such as used in lighting applications. Recognized UL File No. E9391 Zinc Die Cast 98 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 563-DC2 1/4” 1/4” 50 500 Flexible Metal Conduit Fittings Combination Couplings Coupling used to join duplex 14/2 to 10/3 armored or metal clad cable or 3/8” flexible metal conduit to 3/4” EMT. Set screw type transitional fitting ideal for commercial and institutional facilities. A labor savings, compared to the traditional junction box installation. Simply remove the armor and expose the length of conductors to reach the device box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Patented. Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 25 100 4157-DC 3/8”- 3/4” E-Z Lock® Connectors -Steel AMC-50 AMC-5075 AMC-52 Used to connect flexible metal conduit to box or enclosure. Use slotted or Phillips head screwdriver. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Steel / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Throat Opening Unit Qty. Std. Pkg. Qty. AMC-50 AMC-5075 AMC-52 3/8” 1/2” 3/8” 1/2” 1/2” 1/2” .375” .565” .560” 50 25 25 500 250 250 99 Flexible Metal Conduit Fittings Whipper-Snap® Single Screw, Strap Type Connectors Used to connect 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL16SP 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL16ASP 3/8” 1/2” 50 500 Single Screw Strap Connectors Used to connect flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E9391, E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL-17 BL-18 BL-19 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Zinc Die Cast / Insulated Throat - 105°C 100 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL-17I BL-18I BL-19I 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Flexible Metal Conduit Fittings “U” Shaped Strap Connectors 571-S 571-DC2 Used to connect steel or aluminum flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-DC2 572-DC2 573-DC2 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-DCI2 572-DCI2 573-DCI2 1/2” 3/4” 1” 1/2” 3/4” 1” 50 50 25 200 100 100 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-S 572-S 573-S 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Steel Steel / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-SI 572-SI 573-SI 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 101 Flexible Metal Conduit Fittings Whipper-Snap® Snap-in “U” Shaped Strap Connectors SG38SP SG38ASP The SG38SP and SG38ASP are for connecting 14/2 to 10/3 AC/MC cable or 3/8" flexible metal conduit to box or enclosure. Connectors simply snap into the box. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. SG38SP 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C 102 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. SG38ASP 3/8” 1/2” 50 500 Flexible Metal Conduit Fittings Snap Type Connectors 590-DC2 590-DCI2 (Back View) For connecting 14/2 to 10/3 aluminum or steel AC/MC cable or 3/8” flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Push cable or conduit into the connector and install in 1/2” knockout. Redesigned internal spring steel locking ring tabs securely clamp the cable in place and assure bonding. Ring tabs are shaped to accept cable without damage to wire insulation. Patent pending. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 590-DC2 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 590-DCI2 3/8” 1/2” 50 500 103 Flexible Metal Conduit Fittings Whipper-Snap® Snap-In Connectors For connecting 14/2 to 10/3 AC/MC Cable or 3/8” flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility 38ASP 380SP charts in the technical guide section. Push cable or conduit into the connector and snap the connector into the box. Easy push through design eliminates snags and wire insulation damage. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 380SP 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 38ASP 3/8” 1/2” 50 500 Duplex Connectors Strap type fitting used to connect flexible 601-DC2 630 & 630-DC2 metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 691-DC2 File No. LR39354: 601-DC2 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 601-DC2 630-DC2 691-DC2 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 20 20 20 200 200 200 Malleable Iron 104 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 630 3/8” 1/2” 20 200 Flexible Metal Conduit Fittings Duplex Connectors Set screw type fitting used to connect flexible metal (steel) conduit to box or enclosure. 600-DC2 602-DC2 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 600-DC2 602-DC2 3/8” 3/8” 1/2” 1/2” 25 25 100 100 Whipper-Snap® Duplex Connectors 3838SP 846SP 3838ASP The 846SP is a strap type fitting with external spring steel locking tabs that allow the connector to simply snap into the electrical box. The 3838ASP and 3838SP are double-snap type connectors. Simply snap cables into connector and snap assembly into electrical box. No tools required! Use with 14/2 to 10/3 armored or metal clad cable or 3/8” flexible metal conduit. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 3838SP 846SP 3/8” 3/8” 1/2” 1/2” 20 20 200 200 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 3838ASP 3/8” 1/2” 20 200 105 Flexible Metal Conduit Fittings Two Screw Strap Type Connectors Two screw strap type connector used to connect flexible metal conduit to box or enclosure. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 653-DC2 655-DC2 657-DC2 1/2” 3/4” 1” 1/2” 3/4” 1” 25 20 5 100 100 25 45° Connectors Zinc Die Cast Malleable Iron 45° fitting for connecting flexible metal conduit to box or enclosure. File No. E9391 File No. LR39354 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 800-DC2 803-DC2 3/8” 1/2” 1/2” 1/2” 25 25 100 100 Malleable Iron 106 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 800 803 3/8” 1/2” 1/2” 1/2” 25 10 100 100 Flexible Metal Conduit Fittings 90° Connectors 90° fitting with cover used for connecting flexible metal conduit to box or enclosure. File No. E9391: All, except 801-I File No. LR39354 Malleable Iron Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 801 804 806 3/8” 1/2” 3/4” 1/2” 1/2” 3/4” 50 25 10 200 100 50 Malleable Iron / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 801-I 804-I 806-I 3/8” 1/2” 3/4” 1/2” 1/2” 3/4” 50 25 10 200 100 50 107 Flexible Metal Conduit Fittings 90° Connectors 90° fitting with cover used for connecting flexible metal conduit to box or enclosure. File No. E9391 File No. LR39354: 807 thru 811; 807-I thru 811-I Malleable Iron Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 807 808 809 810 811 812 813 814 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5 --------------- 25 10 5 5 5 5 1 1 Malleable Iron / Insulated Throat - 105°C 108 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 807-I 808-I 809-I 810-I 811-I 812-I 813-I 814-I 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5 2 1 1 1 1 ----- 25 10 5 5 5 5 1 1 Flexible Metal Conduit Fittings 90° Connectors Over 2” 3/8” thru 2” 90° fitting with cover used for connecting flexible metal conduit to box or enclosure. 804- thru 808- DC2 & DCI2 also suitable for use with armored cable. File No. E9391: 801-, 809-, 810- DC2 & DCI2 File No. E20534: 804-, 806-, 807-, 808- DC2 & DCI2 File No. LR39354 Zinc Die Cast Catalog Number Trade Size K.O. Size Min. 801-DC2 804-DC2 806-DC2 807-DC2 808-DC2 809-DC2 810-DC2 811-DC2 812-DC2 813-DC2 814-DC2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” --.750” .875” 1.187” 1.500” ------------- Max. Unit. Qty. Std. Pkg. Qty. --.875” 1.000” 1.312” 1.625” ------------- 25 25 10 ----------------- 250 100 50 25 25 5 5 5 5 1 1 Std. Pkg. Qty. 250 100 50 25 25 5 5 Range Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Range Min. Max. Unit. Qty. 801-DCI2 804-DCI2 806-DCI2 807-DCI2 808-DCI2 809-DCI2 810-DCI2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” --.750” .875” 1.187” 1.500” ----- --.875” 1.000” 1.312” 1.625” ----- 25 25 10 --------- 109 Flexible Metal Conduit Fittings Single Screw 90° Connectors Locknut & Whipper-Snap® Designs 90° fitting with cover used for connecting 802-DC2 802SP flexible metal conduit to box or enclosure. Single screw design save time and money. Units with Whipper-Snap design snap into electrical box! Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802-DC2 851-DC2 3/8” 1/2” 1/2” 1/2” 25 25 250 100 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802ASP 802-DCI2 851ASP 851-DCI2 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 25 25 25 25 250 250 100 100 Whipper-Snap® Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802SP 851SP 3/8” 1/2” 1/2” 1/2” 25 25 250 100 Duplex Connectors, 90° 90° fitting with steel cover used to connect flexible metal conduit to box or enclosure. File No. E20534: 830-DC2 Zinc Malleable File No. E191572: 830 Malleable Iron Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 830 3/8” 1/2” 25 100 Zinc Die Cast 110 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 830-DC2 3/8” 1/2” 25 100 Flexible Metal Conduit Fittings Whipper-Snap® 90° Duplex Connectors 84690SP 90º fitting with steel cover used to connect 14/2 (.44” Ø min) to 12/3 (.61” Ø max) steel or aluminum armored cable or 3/8” flexible metal conduit to box or enclosure. Simply snap connector into electrical box! External spring steel locking tabs secures connector. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 84690SP 3/8” 1/2” 25 100 Whipper-Snap® 90° Connector Double Screw Design Simply snap connector into electrical box. External spring steel locking tabs secures connector to electrical box. Patented Whipper-Snap design. 850SP File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 850SP 3/8” 1/2” 25 250 One Hole Straps Snap-on type strap used to support flexible metal conduit, armored cable, or metal clad cable. File No. E161206 Steel Catalog Number 900-F FMC Trade Size Unit Qty. Std. Pkg. Qty. 3/8” 100 1000 111 Armored/Metal Clad Cable Fittings Squeeze Connector Used to connect 12/3 (.56” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable to box or enclosure. File No. E9391 Zinc Die Cast Catalog Number K.O. Size Metal Clad Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. 403-DC2 1/2” .560” 50 500 .610” Set Screw Connector Used to connect .47” Ø to .57” Ø steel armored cable or 12/2 to 10/2 steel metal clad cable to box or enclosure. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Cable Range Min. Max. Unit. Qty. Std. Pkg. Qty. 501-DC2 3/8” 1/2” .470” 100 1000 112 .570” Armored/Metal Clad Cable Fittings Whipper-Snap® Snap in Set Screw Connectors 845SP 845ASP Used to connect 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum AC or steel or aluminum MC cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. To install, tighten screw between convolutions in cable. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Cable Range Min. Max. Unit. Qty. Std. Pkg. Qty. 845SP 3/8” 1/2” .44” 100 1000 .61” Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Cable Range Min. Max. Unit. Qty. Std. Pkg. Qty. 845ASP 3/8” 1/2” .44” 100 1000 .61” 113 Armored/Metal Clad Cable Fittings Single Screw Strap Type Connectors 545-DC2 Single screw, hinged strap type connector used to connect 14/2 (.41” Ø min) to 10/3 (.61” Ø max) steel or aluminum armored or metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Min. Range Max. 545-DC2 3/8” 1/2” .410” .610” Unit. Qty. Std. Pkg. Qty. 100 1000 Whipper-Snap® Single Screw Strap Type Connectors BL16SP BL16ASP Used to connect 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Min. Range Max. BL16SP 3/8” 1/2” .440” .610” Unit. Qty. Std. Pkg. Qty. 50 500 Unit. Qty. Std. Pkg. Qty. 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Min. BL16ASP 3/8” 1/2” .440” 114 Range Max. .610” Armored/Metal Clad Cable Fittings Single Screw, Strap Type Connectors With Tri-Drive Screw 560-DC2 561-DCI2 560-MCIA2 Used to connect armored or metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534: 560-DC2, 561-DC2, 560-MCIA2 File No. LR39354: 560-DC2, 561-DC2, 560-MCIA2 Zinc Die Cast Catalog Number Trade Size K.O. Size Metal Clad Cable Range Min. Max. 560-DC2 561-DC2 3/8” 3/4” 1/2” 3/4” .410” .625” .610” .875” Unit Qty. Std. Pkg. Qty. 50 50 500 500 Unit Qty. Std. Pkg. Qty. 50 50 50 500 500 500 Zinc Die Cast / Insulated Throat - 105°C Trade Size K.O. Size Metal Clad Cable Range Min. Max. 560-DCI2 3/8” 560-MCIA2 3/8” 561-DCI2 3/4” 1/2” 1/2” 3/4” .43” .375 .610” Catalog Number .610” .61” .870” General Cable Sizes Catalog Number 560-DC2, -DCI2 14/2 to 10/3 560-MCIA2 14/2 to 10/4 561-DC2, -DCI2 10/4 to 8/4 115 Armored/Metal Clad Cable Fittings Whipper-Snap® Single Screw Strap Type Connector for MCI-A Cable For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Metal Clad Cable Range Min. Max. BL16MCIA 3/8” 1/2” .38” .61” Unit Qty. Std. Pkg. Qty. 50 500 Multi-Purpose Connector Two Screw, Strap Type Used to connect 14/2 to 12/2 nonmetallic sheath cable (NM-B), steel/aluminum 14/2 to 12/2 armored cable (AC), or metal clad (MC) cable, or steel/aluminum 3/8” flexible metal conduit to 1/4” knockout. Will fit 1/4” knockouts with flats, such as used in lighting applications. Recognized UL File No. E9391 Zinc Die Cast 116 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 563-DC2 1/4” 1/4” 50 500 Armored/Metal Clad Cable Fittings Combination Couplings Coupling used to join duplex 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or 3/8” flexible metal conduit to 3/4” EMT. Set screw type transitional fitting ideal for commercial and institutional facilities. A labor savings, compared to the traditional junction box installation. Simply remove the armor and expose the length of conductors to reach the device box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 4157-DC 1/2” 3/4” 25 100 Two Screw, Strap Type Connector 565-DC2 566-DC2 For connecting 14/2 to 10/3 armored or metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Zinc Die Cast Catalog Number K.O. Size Metal Clad Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. 565-DC2 566-DC2 1/2” 1/2” .440” .440” 100 100 1000 1000 .525” .525” 117 Armored/Metal Clad Cable Fittings Low Profile “U” Shaped Strap Connectors 570-DC2 570-DCI2 570-DCR2 Used to connect 14/2 to 10/3 armored and metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Cable Range Min. Max. 570-DC2 570-DCR2 3/8” 3/8” 1/2” 1/2” .440” .440” .610” .610” Unit. Qty. Std. Pkg. Qty. 50 50 500 500 Unit. Qty. Std. Pkg. Qty. 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Cable Range Min. Max. 570-DCI2 3/8” 1/2” .440” .610” Whipper-Snap® Snap-in “U” Shaped Strap Connectors for MCI-A Cable For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum AC or MC Cable or 3/8” steel or aluminum reduced wall flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Connector simply snaps into the box. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast 118 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. SG38MCIA 3/8” 1/2” 50 500 Armored/Metal Clad Cable Fittings Whipper-Snap® Snap-In “U” Shaped Strap Connectors SG38SP SG38ASP The SG38SP and SG38ASP are for connecting 14/2 (.43” Ø min) to 10/3 (.61” Ø max) AC/MC cable or 3/8” flexible metal conduit to box or enclosure. Connector simply snaps into the box. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. SG38SP 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. SG38ASP 3/8” 1/2” 50 500 119 Armored/Metal Clad Cable Fittings HCF Cable Color-Coded Connectors Suitable for use with steel or aluminum 14/2 (.43” Ø min) to 10/3 (.61” Ø max) Health Care Facilities (HCF) armored cable. Green color for all green cable. Green/Red combination for green with red stripe cable. Patented. File No. E20534 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Color Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 570-GI 570-G/RI Green Green/Red 3/8” 3/8” 1/2” 1/2” 50 50 500 500 Fire Alarm Cable Color-Coded Connectors Die Cast Suitable for use with 18/2 (.41” Ø min) to 12/4 (.61” Ø max) solid TFN or THHN, or 18-2 to 14-2 (.410”-.610” diameter) solid twisted pairs red-colored Fire Alarm MC Cable. Patented. File No. E20534 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Color Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 570-RI Red 3/8” 1/2” 50 500 120 Armored/Metal Clad Cable Fittings E-Z Lock® Connectors -Steel AMC-50 AMC-5075 AMC-52 Used to connect armored or metal clad cable to box or enclosure. Use slotted, Phillips or Robertson head screwdriver. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Steel / Insulated Throat - 105°C Trade Size K.O. Size Cable Range Min. Max. AMC-50 3/8” AMC-5075 1/2” AMC-52 3/8” 1/2” 1/2” 1/2” .415” .580” .415” Catalog Number .610” .920” .610” Throat Unit Opening Qty. .375” .565” .560” 50 25 25 Std. Pkg. Qty. 500 250 250 Cable Sizes for E-Z Lock™ Connectors: AMC-50: 14/2 to 10/3 Armored or Metal Clad Cable AMC-5075: 10/4, 8/2, 8/3, 8/4, 6/2, 6/3 Armored or Metal Clad Cable AMC-52: 14/2 to 10/3 Armored or Metal Clad Cable 121 Armored/Metal Clad Cable Fittings E-Z Lock® Connectors for MCI-A Cable For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum AC/MC cable or 3/8” steel or aluminum flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Use slotted or Phillips head screwdriver. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Throat Opening Unit Qty. Std. Pkg. Qty. AMC-50MCIA 3/8” 1/2” .375 50 500 Single Screw Strap Connectors The BL-17 is used to connect 8/3 AC90 cable. The BL-18 is used to connect 6/3 AC90 and the BL-19 is used to connect 3/3 AC90 to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E9391, E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL-17 BL-18 BL-19 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Zinc Die Cast / Insulated Throat - 105°C 122 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. BL-17I BL-18I BL-19I 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Armored/Metal Clad Cable Fittings Single Screw Strap Connectors for MCI-A Cable For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum AC/MC Cable or 3/8” steel or aluminum flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 560-MCIA2 3/8” 1/2” .50 500 123 Armored/Metal Clad Cable Fittings “U” Shaped Strap Connectors 571-DC2 571-S Used to connect armored and metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 Zinc Die Cast Catalog Number K.O. Size Cable Size 571-DC2 572-DC2 573-DC2 1/2” 3/4” 1” 8/2, 6/3 4/3, 3/4 2/3, 2/0-3 AC/MC Range Min. Max. .630” 1.040” 1.180” .940” 1.120” 1.440” Unit. Qty. Std Pkg. Qty. 50 25 10 200 100 100 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-DCI2 572-DCI2 573-DCI2 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-S 572-S 573-S 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Steel Steel / Insulated Throat - 105°C 124 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 571-SI 572-SI 573-SI 1/2” 3/4” 1” 1/2” 3/4” 1” 50 25 10 200 100 100 Armored/Metal Clad Cable Fittings Snap Type Connectors 590-DC2 590-DCI2 590-DC2 (Back View) For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) aluminum or steel AC/MC cable or 3/8” flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Push cable or conduit into the connector and install in 1/2” knockout. Internal spring steel locking ring tabs securely clamp the cable in place and assure bonding. Ring tabs are shaped to accept cable without damage to wire insulation. Patent pending. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 590-DC2 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 590-DCI2 3/8” 1/2” 50 500 125 Armored/Metal Clad Cable Fittings Whipper-Snap® Snap-In Connectors 38ASP 380SP For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) AC/MC cable or 3/8” flexible metal conduit to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Push cable or conduit into the connector and snap the connector into the box. Easy push through design eliminates snags and wire insulation damage. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 380SP 3/8” 1/2” 50 500 Zinc Die Cast / Insulated Throat - 105°C 126 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 38ASP 3/8” 1/2” 50 500 Armored/Metal Clad Cable Fittings PVC Jacketed MC and TECK Cable Connector CONCRETE TIGHT RAINTIGHT The 595 series connectors are for connecting 12/2 to 10/3 PVC jacketed MC cable (parking deck/lot cable) or 14/2, 14/3, 12/2 TECK Cable with .610” maximum armor and .720” maximum jacket to box or enclosure. The 596 series connectors are for connecting 10/4 to 8/3 PVC jacketed MC cable or 14/3 thru 10/3 TECK Cable with .685” maximum armor and .800” maximum jacket. Simply strip 7/8” to 1” of jacket from end of cable, loosen nut, and push cable into connector until cable reaches end stop. Tighten nut for raintight connection. Knockout gasket provides positive seal at 1/2” K.O. NPT tapered threads permits installation in threaded boxes. Concrete tight. Patented. File No. E202876 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 595-DC2 596-DC2 3/8” 3/8” 1/2” 1/2” 15 15 60 60 Zinc Die Cast / Insulated Throat - 90°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 595-DCI2 596-DCI2 3/8” 3/8” 1/2” 1/2” 15 15 60 60 127 Armored/Metal Clad Cable Fittings 90° PVC Jacketed MC and TECK Cable Connector CONCRETE TIGHT RAINTIGHT For connecting 12/2 to 10/3 PVC Jacketed MC cable (parking deck/lot cable) or 14/2, 14/3, 12/2 TECK cable with .610” maximum armor and .720” maximum jacket to box or enclosure. Simply strip 7/8” to 1” of jacket from end of cable, loosen nut, and push cable into connector until cable reaches end stop. Tighten nut for raintight connection. Knockout gasket provides positive seal at 1/2” K.O. NPT tapered threads permits installation in threaded boxes. Concrete tight. Patented. File No. 202876 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 895-DC2 3/8” 1/2” 10 40 Zinc Die Cast / Insulated Throat - 90°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 895-DCI2 3/8” 1/2” 10 40 Duplex Connector 601-DC2 691-DC2 For connecting 14/2 to 10/3 armored or metal clad cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 File No. LR39354 Zinc Die Cast Catalog Number K.O. Size Metal Clad Range Min. Max. Unit Qty. Std. Pkg. Qty. 601-DC2 691-DC2 1/2” 1/2” .375” .440” 20 20 200 200 128 .625” .610” Armored/Metal Clad Cable Fittings Whipper-Snap® Duplex Connector 3838SP 3838ASP 846SP The 846SP is a strap type fitting with external spring steel locking tabs that allow the connector to simply snap into the electrical box. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. The 3838ASP and 3838SP are double-snap type connectors. Simply snap cables into connector and snap assembly into electrical box. No tools required! Use the 846SP with 14/2 (.44” Ø min) to 10/3 (.61” Ø max), the 3838SP with 14/2 (.44” Ø min) to 12/3 (.61” Ø max) and the 3838ASP with 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or 3/8” flexible metal conduit. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 3838SP 846SP 3/8” 3/8” 1/2” 1/2” 20 20 200 200 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 3838ASP 3/8” 1/2” 20 200 129 Armored/Metal Clad Cable Fittings Two Screw Strap Type Connectors 653-DC2 used to connect aluminum or steel AC cable or flexible metal conduit to box or enclosure. 655-DC2, 657-DC2 used to connect aluminum or steel AC/MC cable or flexible metal conduit to box or enclosure. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size 653-DC2 655-DC2 657-DC2 1/2” 3/4” 1” 1/2” 3/4” 1” 130 Range Min. Max. .675” .850” 1.030” .900” 1.100” 1.310” Unit. Qty. Std. Pkg. Qty. 25 20 5 100 100 25 Armored/Metal Clad Cable Fittings Two Screw Strap Type Connectors 683-DCI2 683-DC2 683-DCX2 Used to connect metal clad cable to box or enclosure. File No. E202876: 683-DC2 thru 686-DC2; 683-DCI2 thru 689-DCI2 and 683-DCX2 thru 689-DCX2 File No. E191676: 687-DC2 thru 689-DC2 Zinc Die Cast (Round Opening) Catalog Number K.O. Size 683-DC2 684-DC2 685-DC2 686-DC2 687-DC2 688-DC2 689-DC2 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” Metal Clad Cable Range Min. Max. .875” 1.094” 1.250” 1.750” 2.000” 2.375” 2.750” 1.040” 1.250” 1.500” 2.000” 2.500” 3.000” 3.500” Unit Qty. Std. Pkg. Qty. 10 10 5 2 1 1 1 100 100 25 10 5 5 5 Unit Qty. Std. Pkg. Qty. 10 10 5 2 1 1 1 100 100 25 10 5 5 5 Unit Qty. Std. Pkg. Qty. 10 10 5 2 1 1 1 100 100 25 10 5 5 5 Zinc Die Cast (Round Opening) / Insulated Throat - 105°C Catalog Number 683-DCI2 684-DCI2 685-DCI2 686-DCI2 687-DCI2 688-DCI2 689-DCI2 K.O. Size 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” Metal Clad Cable Range Min. Max. .750” 1.094” 1.250” 1.750” 2.000” 2.375” 2.750” 1.040” 1.250” 1.500” 2.000” 2.500” 3.000” 3.500” Zinc Die Cast (Rectangular Opening) Catalog Number 683-DCX2 684-DCX2 685-DCX2 686-DCX2 687-DCX2 688-DCX2 689-DCX2 K.O. Size 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” Metal Clad Cable Range Min. Max. .875” 1.094” 1.250” 1.640” 2.000” 2.375” 2.750” 1.040” 1.250” 1.500” 1.750” 2.500” 3.000” 3.500” 131 Armored/Metal Clad Cable Fittings 90° Duplex Connector 90° fitting with steel cover used to connect 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum armored cable to box or enclosure. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 830-DC2 3/8” 1/2” 25 100 Whipper-Snap® 90° Duplex Connectors 84690SP 90º fitting with steel cover used to connect 14/2 (.44” Ø min) to 12/3 (.61” Ø max) steel or aluminum armored cable or 3/8” flexible metal conduit to box or enclosure. Simply snap connector into electrical box! External spring steel locking tabs secures connector. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast 132 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 84690SP 3/8” 1/2” 25 100 Armored/Metal Clad Cable Fittings Whipper-Snap® Snap-In Two Screw Strap Type Connector For connecting 14/2 (.44” Ø min) to 10/3 (.61” Ø max) steel or aluminum AC/MC cable. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E9391 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 840SP 3/8” 1/2” 100 1000 133 Armored/Metal Clad Cable Fittings Whipper-Snap® Two Screw Strap Type Connector For connecting 14/2 (.44”Ø min) to 10/3 (.61” Ø max) AC/MC cable to box or enclosure. Connector simply snaps into the box. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 8400SP 3/8” 1/2” 100 1000 Whipper-Snap® Two Screw Strap Type Connector for MCI-A Cable For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Connector simply snaps into the box. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast 134 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 8400MCIA 3/8” 1/2” 100 1000 Armored/Metal Clad Cable Fittings 90° Connectors 90° fitting with cover for connecting armored or metal clad cable to box or enclosure. File No. E9391: 801-, 809-, 810- DC2 & DCI2 File No. E20534: 804-, 806-, 807-, 808- DC2 & DCI2 File No. LR39354 Zinc Die Cast Catalog Number Trade Size K.O. Size 801-DC2 804-DC2 806-DC2 807-DC2 808-DC2 3/8” 1/2” 3/4” 1” 1 1/4” 1/2” 1/2” 3/4” 1” 1 1/4” Metal Clad Cable Range Min. Max. .500” .750” .875” 1.187” 1.500” .625” .875” 1.000” 1.312” 1.625” Unit. Qty. Std. Pkg. Qty. 25 25 10 ----- 250 100 50 25 25 Unit. Qty. Std. Pkg. Qty. 25 25 10 ----- 250 100 50 25 25 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size 801-DCI2 804-DCI2 806-DCI2 807-DCI2 808-DCI2 3/8” 1/2” 3/4” 1” 1 1/4” 1/2” 1/2” 3/4” 1” 1 1/4” Metal Clad Cable Range Min. Max. .500” .750” .875” 1.187” 1.500” .625” .875” 1.000” 1.312” 1.625” 135 Armored/Metal Clad Cable Fittings Single Screw 90° Connectors Locknut and Whipper-Snap® Designs 802-DC2 802SP 90° fitting with cover used for connecting 12/2 (.48” Ø min) to 10/3 (.58” Ø max) AC/MC cable to box or enclosure. Single screw design saves time and money. Connectors with patented Whipper-Snap design snap into electrical box! For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E202876 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802-DC2 802-MCIA2 3/8” 3/8” 1/2” 1/2” 25 25 250 250 Zinc Die Cast / Insulated Throat - 105°C Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802-DCI2 802ASP 3/8” 3/8” 1/2” 1/2” 25 25 250 250 Whipper-Snap® Zinc Die Cast 136 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 802SP 802MCIA 3/8” 3/8” 1/2” 1/2” 25 25 250 250 Armored/Metal Clad Cable Fittings Whipper-Snap® 90° Connectors Double-Screw Design 850SP Used for connecting 12/2 (.55” Ø min) to 10/3 (.61” Ø max) AC/MC cable to box or enclosure. Simply snap connector into electrical box. External spring steel locking tabs secures connector to electrical box. Patented Whipper-Snap design. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 850SP 3/8” 1/2” 25 250 One Hole Straps Snap-on type strap used to support flexible metal conduit, armored cable, or metal clad cable. File No. E161206 Steel Catalog Number Cable Size 890-MC 14/2, 12/2 891-MC 14/3, 12/3 900-F 12/4, 10/2, 10/3 FMC Trade Size ----3/8” AC/MC Range Min. Max. .475” .540” .560” .525” .590” .610” Unit. Qty. Std. Pkg. Qty. 100 100 100 1000 1000 1000 137 Armored/Metal Clad Cable Fittings Anti-Short Bushings “Redheads” “Redheads” prevent damage to wire insulation when placed between the wire and armored sheath. File No. E11259 File No. LR24719M5 Polyethylene - 90°C Trade Size Cable Size FMC Trade Size Unit Qty. Std. Pkg Qty. 1000 0 14/2,14/3,12/2 5/16” 50 7000 1001 1 14/4,12/3,6/1,4/1 3/8” 50 3500 1002 2 12/4,10/2,10/3,2/1 --- 50 7000 1003 3 10/4,8/2,8/3,1/1 1/2” 20 2000 1004 4 8/4,6/2,6/3, 3/4” 20 1600 Catalog Number 4/2,4/3,6/4 1005 5 ----- 1” 25 100 1006 6 ----- 1 1/4” 10 40 1007 7 ----- 1 1/2” 10 40 1008 8 ----- 2” - 2 1/2” 10 40 AC/MC Cable Bracket Positions maximum of (4) 14/2, 14/3, 14/4, 12/2 or 12/3 AC or MC cables. Galvanized steel construction. Convenient slot and hole for attaching to stud with nails or screws. File No. E161206 Steel 138 Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 895-MC --- 50 500 Armored/Metal Clad Cable Fittings Cable Support NMCB-1 NMCB-3 NMCB-1 positions maximum of (6) 14/2 to 10/3 NM-B cables or (4) 14/2 to 12/2 AC or MC cables. Also suitable for use with low voltage cabling to 3/8” diameter. Furnished with (2) #8 screws for use on wood or steel stud. Complies with NEC Articles 300.4(D) and 320.23(B). Patented. NMCB-3 is provided with nails for use on wood studs or 3/4” thick furring strips to position up to five 14/2 to 10/3 AC or MC cables. May also be attached to metal studs or enclosures, or concrete block with #6 round head screws. Mounts in either horizontal or vertical direction. Low profile design and unique dimpled slots prevent accidental removal of cables. Patented. File No. E161206 Polypropylene Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. NMCB-1 NMCB-3 ----- 25 25 100 100 139 Transition Fittings Combination Couplings Compression type; two-screw steel strap for flexible metal conduit. Malleable Iron Catalog Number Trade Size EMT Trade Size Flex Unit Qty. Std. Pkg. Qty. 280 281 1/2” 1/2” 3/8” 1/2” 25 20 100 100 Combination Couplings 280-DC 281-DC, 282-DC, 282-DCX, 283-DC Set screw type couplings used to join EMT to flexible metal conduit. 280-DC has steel strap. File No. E9391: 281-DC, 282-DC, 283-DC File No. E9391: 280-DC EMT to non-metallic sheath cable only. Zinc Die Cast 140 Catalog Number EMT Trade Size Flex Trade Size Unit Qty. Std. Pkg. Qty. 280-DC 281-DC 282-DC 282-DCX 283-DC 1/2” 1/2” 3/4” 3/4” 1” 3/8” 1/2” 3/4” 1/2” 1” 25 25 25 25 10 100 250 100 100 100 Transition Fittings Combination Couplings Zinc Steel Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. File No. E9391: 290-S thru 292-S Zinc Die Cast Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Catalog Number Trade Size Unit Qty. Std. Pkg. 290-DC 291-DC 292-DC 1/2” 3/4” 1” 50 25 25 200 100 100 290-S 291-S 292-S 1/2” 3/4” 1” 25 25 10 100 100 50 141 Transition Fittings Combination Couplings Used to join rigid or IMC to EMT. Coupling internally threaded for rigid / IMC. Compression type for EMT. Concrete-tight. File No. E9391: 292-MS Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. 290-MS 291-MS 292-MS 1/2” 3/4” 1” 25 25 10 100 100 50 Combination Couplings Coupling used to join EMT to flexible metal conduit. Screw-in end for flex. Compression end for EMT. File No. E9391, also 581-DC UL listed for use with XRWFMC. Zinc Die Cast 142 Catalog Number Trade Size Unit Qty. Std. Pkg. 581-DC 582-DC 583-DC 1/2” 3/4” 1” 50 25 10 500 250 100 Transition Fittings Combination Couplings Coupling used to join duplex 14/2 (.44” Ø min) to 10/3 (.61” Ø max) armored or metal clad cable or 3/8” flexible metal conduit to 3/4” EMT. Set screw type transitional fitting ideal for commercial and institutional facilities. A labor savings, compared to the traditional junction box installation. Simply remove the armor and expose the length of conductors to reach the device box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. Patented. File No. E20534 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 4157-DC 1/2” 3/4” 25 100 Combination Couplings Coupling used to join either metallic or nonmetallic (Type “B”) liquid tight to EMT. Concrete-tight. UL listed “Raintight” File No. E24001 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. 4360-DC 4361-DC 1/2” 3/4” 25 10 100 50 143 Nonmetallic Cable Fittings Multi-Purpose Connector Two Screw, Strap Type Used to connect 14/2 to 12/2 nonmetallic sheath cable (NM-B), steel/aluminum 14/2 to 12/2 armored cable (AC), or metal clad (MC) cable, or steel/aluminum 3/8” flexible metal conduit to 1/4” knockout. Will fit 1/4” knockouts with flats, such as used in lighting applications. Recognized UL File No. E9391 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 563-DC2 1/4” 1/4” 50 500 Duplex Connector Strap type fitting used to connect 14/2 to 10/3 nonmetallic cable to box or enclosure. For MCI-A cables refer to cable connector compatibility charts in the technical guide section. File No. E20534 File No. LR39354 Zinc Die Cast 144 Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 601-DC2 3/8” 1/2” 20 200 Nonmetallic Cable Fittings PVC “Snap-In” Type Connectors 616-NMD 617-NMD For connecting nonmetallic cable to box or enclosure. Locknut not required. File No. E11698 PVC Catalog Number K.O. Size 616-NMD 1/2” 617-NMD 3/4” Nonmetallic Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. One 14/2 to 6/2 Two 14/2 to 12/3 In Any Combination 100 1000 One 8/2, 8/3, 6/2, 6/3 50 500 145 Nonmetallic Cable Fittings PVC “Snap-In” Type Connectors For connecting nonmetallic cable to box or enclosure. Locknut not required. File No. E11698 File No. LR74878 PVC Catalog Number K.O. Size 620-NM 1/2” Catalog Number K.O. Size 621-NM 3/4” Nonmetallic Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. 50 500 Unit Qty. Std. Pkg. Qty. 25 250 Nonmetallic Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. .180” .250” .250” .312” 100 50 50 20 1000 500 250 100 14/2 10/3 Or Two 14/2 12/2 Nonmetallic Cable Range Min. Max. 8/3 6/3 Or Two 12/3 8/3 Two-Piece Clamp Type Connectors For connecting single nonmetallic cable to box or enclosure. Locknut not required. File No. E11698: 642 thru 644 Steel Catalog Number 642 643 644 645 146 K.O. Size 1/2” 3/4” 1 1/4” 1 1/2” .560” .830” .980” 1.125” Nonmetallic Cable Fittings Single Screw, Strap Type Connector For connecting nonmetallic cable to box or enclosure. For use with one or two 14/2 NM-B or 12/2 NM-B cables, or one 14/2 through 10/3 NM-B cable. Also listed for use with 18/3 to 12/3 SJO cord. Patented. File No. E11698 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 651-DC2 3/8” 1/2” 100 1000 Whipper-Snap® Single Screw, Strap Type Connector For connecting nonmetallic cable to box or enclosure. For use with one 14/2 to 10/3 or two 14/2 to 12/2 NM-B cables. Also listed for use with 18/3 to 12/3 SJO cord. Simply snap connector into electrical box. External spring steel locking tabs secures connector to electrical box. Patented Whipper-Snap design. File No. E11698 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 651SP 3/8” 1/2” 100 1000 147 Nonmetallic Cable Fittings Two Screw, Strap Type Connectors 566-DC2 660-DC2 thru 666-DC2 650-DC2 thru 676-DC2 For connecting nonmetallic cable to box or enclosure. 566-DC2, 650-DC2 and 650-HD2 can be used for one or two 14/2 or 12/2 NM-B cables or one 14/2 through 10/3 NM-B cable. The 650-DC2 is also listed for use with 18/3 to 12/3 SJO cord. The 650-HD2 has a die cast strap for heavy duty use and is listed for use with 16/2 to 14/3 SJO cord. File No. E20534: 566-DC2 File No. E11698: 650-DC2, 651SP, 650-HD2 File No. E15123: 660-DC2 thru 666-DC2; 670-DC2 thru 676-DC2 File No. LR39354: 650-DC2, 660-DC2, 670-DC2 Zinc Die Cast - Round Cable Catalog Number K.O. Size 566-DC2 660-DC2 662-DC2 664-DC2 665-DC2 666-DC2 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” Nonmetallic Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. or larger .800” 1.000” 1.300” 1.490” 1.950” 100 25 10 10 ----- 1000 250 100 100 25 25 Oval Service Cable Size Height Width Unit Qty. Std. Pkg. Qty. .250” .250” .437” .500” .625” .750” 1.062” 100 100 25 10 10 ----- 1000 1000 250 100 100 25 25 14/2 .680” .850” 1.090” 1.187” 1.750” Zinc Die Cast - Oval Cable Catalog Number K.O. Size 650-DC2 650-HD2 670-DC2 672-DC2 674-DC2 675-DC2 676-DC2 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 148 .500” .500” .625” .750” 1.062” 1.250” 1.625” Nonmetallic Cable Fittings Whipper-Snap® Two Screw, Strap Type Connector 841SP For connecting nonmetallic cable to box or enclosure. For use with one 14/2 to 10/3 or two 14/2 to 12/2 NM-B cables. Simply snap connector into electrical box. External spring steel locking tabs secures connector to electrical box. Patented Whipper-Snap design. File No. E11698 Zinc Die Cast Catalog Number Trade Size K.O. Size Unit Qty. Std. Pkg. Qty. 841SP 3/8” 1/2” 100 1000 Protector Strip Provides physical protection in minimum depth walls for nonmetallic-sheath cables in accordance with 2008 National Electrical Code. Shields low voltage cables and similar cabling subjected to damage or hidden in shallow recessed walls. May be used in exposed or concealed locations. Slots provided to secure cable as required by National Electrical Code article 334.30. Zinc electroplated, .063” thick steel, 3-foot length. Patented. File No. E161206 Steel Catalog Number Unit Qty. Std. Pkg. Qty. 733-PS --- 20 149 Nonmetallic Cable Fittings Knockout Insulating Bushings Converts metallic box rough edged holes to smooth insulated holes for protection of electrical, voice, data and video cables. Plastic Rated 105°C Catalog Number 9791 9792 9793 9794 9795 9796 9797 K.O. K.O. Dia. Unit Qty. Std. Pkg. Qty. 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” .875” 1.109” 1.359” 1.734” 1.984” 2.469” 2.969” 100 100 50 50 25 20 20 1000 1000 500 500 250 100 100 Stud Bushings Protects wire insulation from abrasion in metal studs. Bushing allows smooth wire pulling. Used for all pre-punched shaped holes. File No. E11259 Polypropylene Catalog Number 9882 150 Trade Size Unit Qty. Std. Pkg. Qty. --- 50 500 Nonmetallic Cable Fittings Cable Support NMCB-1 NMCB-2 NMCB-1 positions maximum of (6) 14/2 to 10/3 NM-B cables or (4) 14/2 to 12/2 AC or MC cables. Also suitable for use with low voltage cabling to 3/8” diameter. Furnished with (2) #8 screws for use on wood or steel stud. Complies with NEC Articles 300.4(D) and 320.23(B). Patented. NMCB-2 is provided with a nail for use on wood studs or 3/4” thick furring strips to position nonmetallic sheath cable. Capable of positioning a single 14/2 to 10/3 NM cable or two 14/2 NM cables in each of three rectangular slots. May also be used with low voltage cable. Low profile design and unique self-locking fingers prevent accidental removal of cables. Grooved nail for extra gripping with stud. Patented. File No. E161206 Polypropylene Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. NMCB-1 NMCB-2 ----- 25 25 100 100 151 Nonmetallic Cable Fittings Cable Stacker For use on steel or wood studs to support nonmetallic sheath, communication, and data cables. Furnished with nail for wood stud. Use #8 x 1/2” self-tapping sheet metal screw for steel stud. Complies with NEC Articles 300-4(D) and 320.23(B). Patented. File No. E161206 Metal Stud Wood Stud Polypropylene Catalog Number Size Unit Qty. Std. Pkg. Qty. NMWH-43 ----- 25 100 CABLE RANGES: Data / Communication Cable Oval Openings: 1 or 2 1 Round Openings: 1 Nonmetallic Sheath Cable Oval Openings: Round Openings: 152 1 or 2 1 or 2 1 1 1 1 .06” to .20” diameter .20” to .32” diameter .16” to .50” diameter 14/2 12/2 10/2 14/3 12/3 10/3 AWG AWG AWG AWG AWG AWG Grounding Products Ground Clamps - Protective Type 1312-B 1306-B, 1308-B, 1308-DC For making connection with protective armor of 4, 6, or 8 AWG copper conductor and ground pipe or grounding electrode. 1308-DC also suitable for use with 1/2” or 3/4” copper water pipe. File No. E20412: 1306-B, 1308-B, 1308-DC File No. LR39354: 1308-DC Brass with Steel Strap Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. 1306-B 1308-B 1312-B 1/2” - 1” 1/2” - 1” 1 1/4” - 2” 25 25 --- 100 100 20 Zinc Die Cast with Steel Strap Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. 1308-DC 1/2” - 1” 25 250 153 Grounding Products Ground Clamps - Bare Wire Type 1307-B, 1307-B1, 1309-B, 1309-DC, 1314-B, 1315-B 1313-B For making connection with No. 4, 6, or 8 AWG bare copper ground wire and 1/2” through 4” grounding pipe or grounding electrode. 1309-DC also suitable for use with 1/2” or 3/4” copper water pipe. File No. E20412: All, except 1307-B1 & 1313-B File No. LR39354: 1309-DC Zinc Die Cast Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. 1309-DC 1/2” - 1” 20 200 Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. 1307-B 1309-B 1313-B 1315-B 1/2” - 1” 1/2” - 1” 1 1/4” - 2” 2 1/4” - 4” 50 20 --2 200 200 20 10 Brass Brass with Brass Screws 154 Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. 1307-B1 1/2” - 1” 50 200 Grounding Products Ground Clamps Threaded Hub Type For making connection with No. 4, 6, or 8 AWG copper ground wire through threaded rigid conduit. File No. E20412: 1325-B, 1325-B1, 1326-B, 1328-B, 1330-B, 1331-B Brass Catalog Number Ground Pipe Grounding Electrode Size Rigid Trade Size Unit Qty. Std. Pkg. Qty. 1325-B 1326-B 1328-B 1330-B 1331-B 1/2” - 1” 1 1/4” - 2” 2 1/2” - 4” 1/2” - 1” 1 1/4” - 2” 1/2” 1/2” 1/2” 3/4” 3/4” ----------- 50 20 10 50 20 Brass with Brass Screws Catalog Number Ground Pipe Grounding Electrode Size Rigid Trade Size Unit Qty. Std. Pkg. Qty. 1325-B1 1/2” - 1” 1/2” --- 50 155 Grounding Products Brass Ground Clamps With Strap and Hub For making connection with no. 4, 6, or 8 AWG copper wire through threaded conduit. Ground wire terminated to set screw. File No. E20412 Brass with Steel Screws Catalog Number Trade Size In Inches. Hub Size Unit Qty. Std. Pkg. Qty. 1325-BH 1330-BH 1345-BH 1/2, 3/4, 1 1/2, 3/4, 1 1/2, 3/4, 1 1/2” 3/4” 1” ------- 25 25 25 Solderless Lugs ALI Series CLU Series Copper lugs are used with copper conductors and provide high conductivity with lower heat rise. Aluminum lay-in lugs are suitable for use with copper or aluminum conductors. File No. E155561: ALI-50, ALI-112, ALI-252, CLU-70 Aluminum Catalog Number CU Wire Range Stud Size Unit Qty. Std. Pkg. Qty. ALI-50 ALI-112 ALI-252 4 thru 14 1/0 thru 14 250 MCM thru 6 #10 1/4” 5/16” 25 20 10 250 200 100 Copper Catalog Number AWG KCM Wire Capacity Stud Size Amperage Rating Unit. Qty. Std. Pkg. Qty. CLU-35 CLU-70 CLU-125 6 thru 14 2 thru 8 1/0 thru 6 #10 1/4” 1/4” 35-50 70-90 125 25 20 10 250 200 100 156 Grounding Products Bonding Jumper Assembly Use Bonding Jumper Assembly to comply with article 250 of the National Electrical Code. Suitable for use on EMT, rigid conduit, or copper water pipe. If used with expansion coupling: assemble ground clamp to conduit 1” from stationary end of coupling. Attach second ground clamp 2” from sliding end of expansion coupling. NOTE: Total movement is 4”. Assembly features bronze ground clamps and copper bonding strip. File No. E20412 Bronze Catalog Number Conduit Trade Size Unit Qty. Std. Pkg. Qty. BJ-100 BJ-200 BJ-400 1/2” thru 1” 1 1/4” thru 2” 2 1/2” thru 4” 1 1 1 10 10 10 Ground Clamps Direct Burial Type For making connection with DB-1308 DB-1309 No. 4, 6, or 8 AWG copper wire and 1/2” through 1” ground pipe or grounding electrode, or 3/8” thru 3/4” rebar. DB-1308 protective type for bare or armored copper ground wire. DB-1309 for bare ground only. All materials contain minimum of 80% copper. File No. E20412 Clamps meet both UL and NEC requirements for burial in earth or embedment in concrete. Bronze Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. DB-1308 DB-1309 1/2” - 1” 1/2” - 1” 25 20 100 200 157 Grounding Products Grounding Rod Clamps Direct Burial Type For terminating bare copper conductor to ground rod. Conductor range #10 solid to #2 stranded. File No. E20412 Clamps meet both UL and NEC requirements for burial in earth or embedment in concrete. Bronze Catalog Number Ground Pipe Grounding Electrode Size Unit Qty. Std. Pkg. Qty. GRC-50 GRC-63 GRC-75 1/2” 5/8” 3/4” 100 50 50 400 200 200 Enclosure Grounding Connectors Low cost and easy to use connector for securing grounding conductors at the enclosure in accordance with National Electrical Code (NEC) article 250.8. Trade size 1/2” suitable for use with no. 8, 6, 4, 3, or 2 AWG copper or aluminum, stranded or solid, conductor; 3/4” size for use with no. 4, 3, 2, 1, 1/0, 2/0, and 3/0 AWG copper or aluminum, stranded or solid, conductor. Selection of conductor size to be made per NEC article 250.66. Suitable for service entrance grounding. Product advantages include: • Precision machined brass body with zinc die cast locknut and stainless steel set screw • Professional installation appearance • Serrated locknut removes residual paint from box • Tamper Resistant as locknut and set screw are mounted inside the box • Low profile flange on outside of box clearly marked with application guideline for ease in AHJ inspection • cULus listed for grounding per UL467 File No. E20412 Patent Pending. Brass Catalog Number Trade Size In Inches. AWG Wire Capacity Unit Qty. Std. Pkg. Qty. MC-050 MC-075 1/2” 3/4” #8 - #2 #4 - #3/0 25 25 100 100 158 Grounding Products Enclosure Grounding Couplings Low cost and easy to use coupling for use with rigid conduit and for securing grounding conductors at the enclosure in accordance with National Electrical Code (NEC) article 250.8. Trade size 1/2” suitable for use with no. 8, 6, 4, 3, or 2 AWG copper or aluminum, stranded or solid, conductor; 3/4” size for use with no. 4, 3, 2, 1, 1/0, 2/0, and 3/0 AWG copper or aluminum, stranded or solid, conductor. Selection of conductor size to be made per NEC article 250.66. Suitable for service entrance grounding. Product advantages include: • Precision machined brass body with zinc die cast locknut and stainless steel set screw • Professional installation • Serrated locknut removes residual paint from box • Use with rigid metallic or PVC rigid conduit • Low profile flange on inside of box clearly marked with application guideline for ease in AHJ inspection • cULus listed for grounding per UL467 Patent Pending. File No. E20412 Brass Catalog Number Trade Size In Inches. AWG Wire Capacity Unit Qty. Std. Pkg. Qty. MCC-050 MCC-075 1/2” 3/4” #8 - #2 #4 - #3/0 25 25 100 100 159 Grounding Products Rebar Ground Clamps -Direct Burial Type RB-17 RB-16 For making connection with #10 AWG solid to #2 AWG stranded copper wire to 1/2” to 1” ground water pipe or 3/8” to 1” rebar. All materials contain minimum of 80% copper. File No. E20412 Clamps meet both UL and NEC requirements for burial in earth or embedment in concrete. Bronze Catalog Number Ground Pipe Rebar Unit Qty. Std. Pkg. Qty. RB-16 RB-17 1/2” - 1” 1/2” - 1” 3/8” - 1” 3/8” - 1” 20 20 200 200 160 Clamps and Hangers Switch Box Supports To support switch box in wallboard; installed in pairs. Steel Catalog Number Unit Qty. Std. Pkg. Qty. 722 100 1000 Insulator Support Beam Clamps 951-S 951 Single screw beam clamp insulator support with two threaded holes. 951-A for use with bridle ring. File No. E161206: 951 thru 954, 951-A Malleable Iron Catalog Number 951 951-A 952 953 954 Size Tap Size (UNC) Approx. Jaw Opening Max. Load Lbs. Unit Qty. Std. Pkg. Qty. 1” 1” 1 1/2” 2” 2 1/2” 1/4-20 10-24 5/16-18 3/8-16 1/2-13 3/4” 3/4” 11/16” 7/8” 1” 125 100 300 300 600 25 25 ------- 100 100 50 50 25 Steel Catalog Number 951-S 953-S Size Tap Size (UNC) Approx. Jaw Opening Max. Load Lbs. Unit Qty. Std. Pkg. Qty. 1” 2” 1/4-20 3/8-16 3/4” 7/8” 100 200 25 --- 100 50 161 Clamps and Hangers Conduit Clamps Right Angle Type Parallel Type Edge Type To secure conduit perpendicular to beam or channel. For rigid and IMC conduit. Malleable Iron – Right Angle Type* Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 961 962 963 964 965 966 967 968 969 970 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 10 10 10 10 5 5 5 5 5 5 50 50 50 50 25 25 25 25 25 25 *Also available in Edge Type (Catalog Series 971 thru 978; Trade Sizes 1/2” to 3”) and Parallel Type (Catalog Series 981 thru 990; Trade Sizes 1/2” to 4”) Conduit Hangers With Bolt To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. Zinc Plated 304 Stainless Steel 162 Catalog Number Trade Size Rigid Size EMT Size Std. Pkg. Qty. 2100-S 2110-S 2120-S 2125-S 2130-S 2140-S 2150-S 2160-S 2170-S 2180-S 2190-S 0 1 2 2 1/2 3 4 5 6 7 8 9 3/8” & 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 50 25 25 10 10 Clamps and Hangers Conduit Hangers To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. 2100-BN thru 2140-BN come with carriage bolt. All others have 2-way slotted/Phillips screw. File No. E161206 Zinc Plated Steel with Bolt Catalog Number Trade Size Rigid Size EMT Size Std. Pkg. Qty. 2100 2110 2120 2125 2130 2140 0 1 2 2 1/2 3 4 3/8” & 1/2” 3/4” 1” --1 1/4” 1 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” - 100 100 100 50 50 50 Zinc Plated Steel with Bolt & Nut Catalog Number Trade Size Rigid Size EMT Size Std. Pkg. Qty. 2100-BN 2110-BN 2120-BN 2125-BN 2130-BN 2140-BN 2150 2160 2170 2180 2190 0 1 2 2 1/2 3 4 5 6 7 8 9 3/8” & 1/2” 3/4” 1” --1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 1/2” 3/4” 1” 1 1/4” 1 1/2” --2” 2 1/2” 3” 3 1/2” 4” 100 100 100 50 50 50 50 25 25 10 10 163 Service Entrance Two Screw Strap Type Connectors Oval Cable Round Cable For connecting round or oval service cable to box or enclosure. File No. E15123 File No. LR39354: 660-DC2, 670-DC2 Zinc Die Cast - Round Cable Catalog Number K.O. Size 660-DC2 662-DC2 664-DC2 665-DC2 666-DC2 3/4” 1” 1 1/4” 1 1/2” 2” Round Service Cable Range Min. Max. Unit Qty. Std. Pkg. Qty. 25 10 10 ----- 250 100 100 25 25 Oval Service Cable Size Height Width Unit Qty. Std. Pkg. Qty. .437” .500” .625” .750” 1.062” 25 10 10 ----- 250 100 100 25 25 .680” .850” 1.090” 1.187” 1.750” .800” 1.000” 1.300” 1.490” 1.950” Zinc Die Cast - Oval Cable Catalog Number K.O. Size 670-DC2 672-DC2 674-DC2 675-DC2 676-DC2 3/4” 1” 1 1/4” 1 1/2” 2” 164 .625” .750” 1.062” 1.250” 1.625” Service Entrance UF Connectors Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. File No. E11698 Zinc Die Cast Catalog Number Trade Size Cable Size Unit Qty. Std. Pkg. Qty. 761-UF 1/2” 25 100 762-UF 3/4” 14/2, 12/2, 10/2 (.250” x .500”) 14/3, 12/3, 10/3 (.260” x .720”) 10 50 Watertight Service Entrance Cable Connectors Compression type connector which provides watertight seal around service entrance cable. Zinc Die Cast Catalog Number K.O. Size Grommet Opening Size Unit Qty. Std. Pkg. Qty. 763-4 763-6 763-8 764-2 764-2N 764-3 765-2 765-3 766-2 766-3 766-4 766-4N 1” 1” 1” 1 1/4” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 2” 2” 2” 2” .520” x .840” .440” x .700” .406” x .688” .600” x 1.000” .665” x 1.094” .560” x .950” .865” x 1.325” .875” x 1.375” .860” x 1.340” .870” x 1.370” .900” x 1.500” 1.100” x 1.750” 10 10 10 5 5 5 ------------- 100 100 100 50 50 50 25 25 10 10 10 10 165 Service Entrance One & Two Hole Service Entrance Straps 881-SE thru 884-SE 1881-SE thru 1884-SE To support oval service entrance cable, types SE and SEU, to mounting surface. Zinc Plated Steel - One Hole Straps Catalog Number SE / SEU Cable Size Unit Qty. Std. Pkg. Qty. 881-SE 882-SE 883-SE 884-SE #3, #8, #6, #4 #3, #3, #2 #3, #1, #0, #1/0, #2/0 #3/0, #4/0 100 100 50 50 1000 1000 500 500 Zinc Plated Steel - Two Hole Straps 166 Catalog Number SE / SEU Cable Size Unit Qty. Std. Pkg. Qty. 1881-SE 1882-SE 1883-SE 1884-SE 3-#8, #6, #4 3-#3, #2 3-#1, #0, #1/0, #2/0 3-#3/0, #4/0 100 50 50 50 1000 500 500 500 Service Entrance Sill Plates When used with sealing compound, sill plates prevent water from entering structure. Aluminum With Screws and Sealing Compound Catalog Number Service Cable Size Unit Qty. Std. Pkg. Qty. 3-#4 3-#2 10 10 100 100 937-C 938-C PVC Without Screws and Sealing Compound Catalog Number Service Cable Size Unit Qty. Std. Pkg. Qty. 938-PVC 3-#4 to 3-#0 10 100 Service Entrance LB Allows access to the interior of a conduit system for inspection, pulling and maintenance. Mounts flush against structure, raintight. File No. E11077 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1025 1026 1027 1028 1029 1030 1028-XL 1030-XL 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1 1/4” 2” 5 5 ----------1 50 50 20 10 5 4 10 6 167 Service Entrance Entrance Caps Threaded Type Threaded type entrance cap for rigid conduit or IMC. File No. E11259: 1201 thru 1210 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5” 6” 5 5 2 ------------------- 50 50 20 10 5 5 1 1 1 1 1 1 Entrance Cap Hole Sizes: 1201: 4 holes 5/16” dia. 1202: 2 holes 3/8” dia., 3 holes 7/16” dia. 1203: 2 holes 7/16” dia., 3 holes 5/8” dia. 1204: 2 holes 7/16” dia., 3 holes 5/8” dia. 1205: 1 hole 7/16” dia., 2 holes 5/8” dia., 3 holes 3/4” dia. 1206: 1 hole 9/16” dia., 2 holes 3/4” dia., 3 holes 1” dia. 1207: 1 hole 1” dia., 3 holes 7/8” dia., 3 holes 1 5/16” dia. 1208: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1209: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1210: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1211: 4 holes 1 3/4” dia., 2 holes 1 1/8” dia. 1212: 4 holes 1 3/4” dia., 2 holes 1 1/8” dia. 168 Service Entrance Entrance Caps For Oval Service Entrance Cable Entrance cap for use with oval service entrance cable. File No. E15123 Entrance Cap Hole Sizes: 1220: 2 holes 9/16” dia. 1221: 2 holes 25/32” dia. Zinc Die Cast Catalog Number Oval Service Cable Size Unit Qty. Std. Pkg. Qty. 3-#2 5 50 Oval Service Cable Size Unit Qty. Std. Pkg. Qty. 3-#1/0 thru 3-#4/0 --- 10 1220 Aluminum Catalog Number 1221 Entrance Caps For Oval Service Entrance Cable Electrical grade rigid PVC entrance cap with galvanized steel mounting bracket and strap for use with oval service entrance cable. File No. E15123 PVC Catalog Number Oval Service Cable Size Unit Qty. Std. Pkg. Qty. 1240-PVC 1241-PVC 1242-PVC 3-#8, 6, 4, 2 3-#1/0, 2/0 3-#3/0, 4/0 5 ----- 50 10 10 169 Service Entrance Entrance Caps Mast Type Slip-fit screw type entrance cap for rigid conduit or IMC. File No. E11259 Entrance Cap Hole Sizes: 1246-MT: 2 holes 7/16” dia., 3 holes 5/8” dia. 1257-MT: 1 hole 9/16” dia., 2 holes 3/4” dia., 3 holes 1” dia. Aluminum / Phenolic Insulator 170 Catalog Number Size Unit Qty. Std. Pkg. Qty. 1246-MT 1257-MT 2”, 1 1/4” Cap 2 1/2”, 2” Cap ----- 10 5 Service Entrance Entrance Caps Clamp-On Type Clamp type entrance cap for rigid conduit and IMC. File No. E11259 Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 5 5 ----------------- 50 50 20 10 5 5 1 1 1 1 Entrance Cap Hole Sizes: 1251: 4 holes 5/16” dia. 1252: 2 holes 3/8” dia., 3 holes 7/16” dia. 1253: 2 holes 7/16” dia., 3 holes 1/2” dia. 1254: 2 holes 7/16” dia., 3 holes 5/8” dia. 1255: 1 hole 7/16” dia., 2 holes 5/8” dia., 3 holes 3/4” dia. 1256: 1 hole 9/16” dia., 2 holes 3/4” dia., 3 holes 1” dia. 1257: 1 hole 1” dia., 3 holes 7/8” dia., 3 holes 1 5/16” dia. 1258: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1259: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1260: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 171 Service Entrance PVC Entrance Heads PVC entrance head for mounting on PVC, rigid, IMC or EMT. Removable EMT adapter sleeve and no-turn square nut allow for fast installation. File No. E9391 File No. LR74878 PVC 172 Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1251-PVC 1252-PVC 1253-PVC 1254-PVC 1255-PVC 1256-PVC 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 5 5 --------- 50 50 20 10 5 5 Service Entrance Entrance Caps Set Screw Type Set screw type entrance cap for rigid conduit or IMC. 1253-S thru 1255-S - come with one screw. 1256-S thru 1260-S - come with two screws. File No. E11259 Aluminum / Phenolic Insulator Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1253-S 1254-S 1255-S 1256-S 1257-S 1258-S 1259-S 1260-S 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” ----------------- 20 10 5 5 1 1 1 1 Entrance Cap Hole Sizes: 1253-S: 2 holes 7/16” dia., 3 holes 1/2” dia. 1254-S: 2 holes 7/16” dia., 3 holes 5/8” dia. 1255-S: 1 hole 7/16” dia., 2 holes 5/8” dia., 3 holes 3/4” dia. 1256-S: 1 hole 9/16” dia., 2 holes 3/4” dia., 3 holes 1” dia. 1257-S: 1 hole 1” dia., 3 holes 7/8” dia., 3 holes 1 5/16” dia. 1258-S: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1259-S: 3 holes 1 3/4” dia., 4 holes 1 1/8” dia. 1260-S: 2 holes 1 1/8” dia., 4 holes 1 3/4” dia. 173 Service Entrance Mast Kits Service entrance mast kits provide an assortment of mast components for installing overhead service drops. Use for both residential and commercial buildings that utilize conduit. Catalog Number Description Contents MK-10020 2" Service Entrance Kit --(125-150-200 AMP)) • Service Head (Cat 1256) • Roof Flashing (Cat RF-200) • Porcelain Wire Holder (Cat MWH-1) • 2” Rigid Pipe Strap (2 pcs.) (Cat 1906) 1 MK-20000 Service Entrance Kit for Oval 1 S.E. Cable (200 Amp or less) • Service Head (Cat 1221) • Service Entrance Connector (2 pcs.) (Cat 676-DC2) • Watertight S.E. Connector (Cat 766-4) • 3/0-4/0 S.E. Strap (12 pcs.) (Cat 884-SE) 10 MK-20025 2-1/2” Service Entrance Kit --(125-150-200 Amp) • Service Head (Cat 1257-MT) • Roof Flashing (Cat RF-250) • Conduit Support (2 pcs) • Porcelain Wire Holder (Cat MWH-1) 1 MK-20025R 2-1/2” Service Entrance Kit --(125-150-200 Amp) • Service Head (Cat 1257-MT) • Porcelain Wire Holder (Cat MWH-1) • Roof Flashing (Cat RF-250) • Conduit Support (2 pcs) • Bottom Reducer 1 174 Unit Qty. Std. Pkg. Qty. Service Entrance Mogul Conduit Bodies MLB-47 THROUGH MLB-50 MLB-44 THROUGH MLB-46 Allows larger access to the inside of a raceway for wire pulling. Raintight. File No. E11077 File No. E11077 (MLB-47 thru MLB-50) Aluminum Catalog Number Trade Size Unit Std. Pkg. Qty. Qty. Dim A MLB-44 MLB-45 MLB-46 MLB-47 MLB-48 MLB-49 MLB-50 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” --------------- 2 3/4” 4 3/4” 5 3/4” 6 1/4” 6 1/4” 7 7/8” 7 7/8” 5 2 2 1 1 1 1 B Dim B Dim C 2 3/8” 3 1/8” 3 1/8” 4 7/16” 4 7/16” 5 1/2” 5 1/2” 8 1/2” 11 1/2” 13” 20” 20” 26” 26” A C 175 Service Entrance Roof Flashings RF-125 thru RF-250 RFN-125 thru RFN-400 Galvanized – for use with galvanized, plastic, or cast iron electrical service mast. Fits flats to 40º. Neoprene – for use with copper, cast iron, galvanized, or plastic pipe. Fits up to 45º angle, not recommended for hot-mopped or built-up roofs. Neoprene Galvanized Catalog Trade Unit Std. Pkg. Catalog Number Number Size Qty. Qty. RF-125 1 1/4” --RF-150 1 1/2” --RF-200 2” --RF-250 2 1/2” --- 25 25 25 25 Trade Size Unit Std. Pkg. Qty. Qty. RFN-125 1 1/4” - 1 1/2” RFN-200 2” RFN-250 2 1/2” RFN-300 3” RFN-400 4” ----------- 12 12 12 12 12 Porcelain Wire Holders RWH-1 - Reinforced type wire holder with 3/8” lag screw 2 1/2” long. MWH-1 MWH-1 - Clamp-on adjustable wire holder RWH-1 for 1 1/4”, 1 1/2”, 2”, 2 1/2” and 3” service entrance mast. Porcelain Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. RWH-1 MWH-1 --1 1/4” - 3” ----- 50 20 Wedge Grip Clamps For reducing strain and sagging of overhead type ACSR service entrance cables. Place service entrance cable into shell, slide wedge forward and secure in place. Hook stainless steel bail onto lag, or similar mounting device, on building structure. Maximum load is 1000 lbs. Aluminum 176 Catalog Number Wire Size ACSR Unit Qty. Std. Pkg. Qty. WGC-1 WGC-2 WGC-3 6-4 4 - 1/0 2/0 - 4/0 25 10 10 100 40 40 Service Entrance Service Entrance Kits Service entrance kits provide an assortment of components for electrical service installation. SE-KIT200 Catalog Number SE-KIT100 Description 100 Amp SE Cable Kit Unit Qty. Std. Pkg. Qty. --- 1 --- 1 --- 1 • Service Head (1240-PVC) • Water Tight Connector (764-2N) • Duct Seal (DS-100) • (2) SE Connectors (674-DC2) • (12) 1 Hole Straps (882-SE) • (2) Ground Clamps (1308-DC) • (2) Ground Rod Clamps (GRC-63) • (13) #10 x 1-½” Hex Head Slotted Screws SE-KIT150 150 Amp SE Cable Kit • Service Head (1241-PVC) • Water Tight Connector (765-2) • Duct Seal (DS-100) • (2) SE Connectors (675-DC2) • (12) 1 Hole Straps (883-SE) • (2) Ground Clamps (1308-DC) • (2) Ground Rod Clamps (GRC-75) • (13) #10 x 1-½” Hex Head Slotted Screws SE-KIT200 200 Amp SE Cable Kit • Service Head (1242-PVC) • Water Tight Connector (766-3) • Duct Seal (DS-100) • (2) SE Connectors (676-DC2) • (12) 1 Hole Straps (884-SE) • (2) Ground Clamps (1308-DC) • (2) Ground Rod Clamps (GRC-75) • (13) #10 x 1-½” Hex Head Slotted Screws 177 Voice / Data / Video Insulator Support Beam Clamps 951-S 951 Single screw beam clamp insulator support with two threaded holes. 951-A for use with bridle ring. File No. E161206: 951 thru 954, including 951-A Malleable Iron Catalog Number 951 951-A 952 953 954 Size Tap Size (UNC) Approx. Jaw Opening Max Load Lbs. Unit Qty. Std. Pkg. Qty. 1” 1” 1 1/2” 2” 2 1/2” 1/4-20 10-24 5/16-18 3/8-16 1/2-13 3/4” 3/4” 11/16” 7/8” 1” 125 100 300 300 600 25 25 ------- 100 100 50 50 25 Size Tap Size (UNC) Approx. Jaw Opening Max Load Lbs. Unit Qty. Std. Pkg. Qty. 1” 2” 1/4-20 3/8-16 3/4” 7/8” 100 200 25 --- 100 50 Steel Catalog Number 951-S 953-S 178 Voice / Data / Video Knockout Insulating Bushings Converts metallic box rough edged holes to smooth insulated holes for protection of electrical, voice, data and video cables. Plastic Rated 105°C Catalog Number 9791 9792 9793 9794 9795 9796 9797 K.O. K.O. Dia. Unit Qty. Std. Pkg. Qty. 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” .875” 1.109” 1.359” 1.734” 1.984” 2.469” 2.969” 100 100 50 50 25 20 20 1000 1000 500 500 250 100 100 Stud Bushings Protects wire insulation from abrasion in metal studs. Bushing allows smooth wire pulling. Used for all pre-punched shaped holes. File No. E11259 Polypropylene Catalog Number Hole Dia. Unit Qty. Std. Pkg. Qty. 9882 ---- 50 500 179 Voice / Data / Video Bridle Rings BR BRI BRW BRWI Steel bridle rings provide support for voice, data, or video cables. Open loop end allows easy insertion of cables. Machine thread style has 1/4-20 thread for use with beam clamps or other clamping devices. Wood style rings are threaded for easy assembly into 1/8” dia. pre-drilled hole. File No. E161206 (BRI-150, BRI-200, BRWI-150 & BRWI-200) Zinc Plated Threaded Bridle Rings Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. BR-150 BR-200 BR-400 1 1/2” 2” 4” ------- 100 100 50 Zinc Plated Threaded Bridle Rings / Plastic Insulator Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. BRI-150 BRI-200 1 1/2” 2” ----- 50 50 Zinc Plated Bridle Rings For Wood Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. BRW-150 BRW-200 1 1/2” 2” ----- 100 100 Zinc Plated Bridle Rings For Wood / Plastic Insulator 180 Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. BRWI-150 BRWI-200 1 1/2” 2” ----- 50 50 Voice / Data / Video Electrical Box Extender / Insulator BXE-100 BXE-300 For use with most metallic or nonmetallic electrical boxes to extend box face. Simply slide non-conductive extender into box to correct setbacks up to 1”. May also be used as an insulating barrier between metallic box and device. Extender / Insulator does not require trimming and is completely hidden by faceplate. Complies with NEC Article 314.20. Patented. File No. E216710 Available in single gang BXE-100, duplex BXE-200 or round BXE-300 configurations. PVC Catalog Number Unit Qty. Std. Pkg. Qty. BXE-100 BXE-200 BXE-300 25 ----- 100 25 25 Tubing and Coaxial Straps Used to support tubing and coaxial cable to mounting surface. Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. CC-25 CC-31 CC-37 1/4” 5/16” 3/8” 100 100 100 1000 1000 1000 181 Voice / Data / Video Distribution Rings For support of communication cables. May be mounted in horizontal or vertical position. Enclosed design; all rings have four mounting holes for #10 screws. Aluminum Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. DR-200 DR-300 DR-500 2” 3” 5” 10 10 --- 40 20 10 Communications / Data Plate Mounting Bracket (Old Work) Eliminates need for outlet box. Provides mounting base for securing communication or data line face plates. Mounts standard low voltage outlets and plates (Class 2 only). Hardware included. Zinc Plated Steel 182 Catalog Number Unit Qty. Std. Pkg. Qty. LVB-1 10 100 Voice / Data / Video Cable Support NMCB-1 Positions maximum of (6) 14/2 to 10/3 NM-B cables or (4) 14/2 to 12/2 AC or MC cables. Also suitable for use with low voltage cabling to 3/8” diameter. Furnished with (2) #8 screws for use on wood or steel stud. Complies with NEC Articles 300.4(D) and 320.23(B). Patented. File No. E161206 NMCB-2 NMCB-2 is provided with a nail for use on wood studs or 3/4” thick furring strips to position nonmetallic sheath cable. Capable of positioning a single 14/2 to 10/3 NM cable or two 14/2 NM cables in each of three rectangular slots. May also be used with low voltage cable. Low profile design and unique self-locking fingers prevent accidental removal of cables. Grooved nail for extra gripping with stud. Patented. File No. E161206 Polypropylene Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. NMCB-1 NMCB-2 ----- 25 25 100 100 183 Voice / Data / Video Low Voltage Device Holders for New Work NMLV-100F NMLV-200F NMLV-100F and NMLV-200F used on 3/4” thick furring strips, 2” x 4” wood or steel stud. Provided with 2 nails for use on 2” x 4” wood stud. Use #6 flat head screws for steel stud or 3/4” thick furring strip. NMLV-100B and NMLV-200B used on 2” x 4” wood or steel stud with 1/2” or 3/4” EMT. Provided with 2 nails for use on 2” x 4” wood stud. Use #6 flat head screws for steel stud. Steel bracket will accommodate 1/2” or 3/4” EMT connector. Patented. File No. E11259 PVC Catalog Number NMLV-100B NMLV-100F NMLV-200B NMLV-200F Trade Size Unit Qty. Std. Pkg. Qty. Single Gang Single Gang Double Gang Double Gang 5 10 5 5 50 100 50 50 NMLV-100B 184 NMLV-200B Voice / Data / Video Cable Stacker For use on steel or wood studs to support nonmetallic sheath, communication, and data cables. Furnished with nail for wood stud. Use #8 x 1/2” self-tapping sheet metal screw for steel stud. Complies with NEC Articles 300-4(D) and 320.23(B). Patented. File No. E161206 Metal Stud Wood Stud Polypropylene Catalog Number Size Unit Qty. Std. Pkg. Qty. NMWH-43 ----- 25 100 CABLE RANGES: Data / Communication Cable Oval Openings: 1 or 2 1 Round Openings: 1 Nonmetallic Sheath Cable Oval Openings: Round Openings: 1 or 2 1 or 2 1 1 1 1 .06” to .20” diameter .20” to .32” diameter .16” to .50” diameter 14/2 12/2 10/2 14/3 12/3 10/3 AWG AWG AWG AWG AWG AWG 185 Voice / Data / Video Insulating Bushing EMT bushing insulates telephone, computer, video and other low voltage wiring from sharp edges of EMT. Complies with NEC Article 300-15(c). Polyethylene - 90°C 186 Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. TWB-51 TWB-52 TWB-53 TWB-54 TWB-55 TWB-56 TWB-57 TWB-58 TWB-59 TWB-60 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 100 50 25 25 ------------- 1000 500 250 250 100 50 25 25 25 25 Hazardous Location Hazardous Location Fundamentals Fire Tetrahedron Fue l at ce He Sour n itio Ign Oxygen Hazardous Classified Locations Classified areas are locations where flammable or combustible gases or vapors and materials may be present in the atmosphere or may accumulate on equipment. The presence of these materials may present a fire hazard if exposed to an ignition source. The National Electrical Code The NFPA 70 National Electrical Code serves primarily as the standard for electrical installations in hazardous classified areas. The objective is to control electrical ignition sources in hazardous classified areas. NEC Articles for Hazardous Classified Locations Art 500 Art 501 Art 502 Art 503 Art 504 Art 505 Art 506 Art 510-517 General Requirements Class I -- Gases, Vapors, Liquids Class II – Combustible dusts Class III – Fibers and Flyings Intrinsically safe Systems Class I, Zones 0, 1 & 2 Dusts, Fibers, Flyings, Zones 20, 21, 22 Specific Occupancies For the Classification of Flammable Liquids, Gases, or Vapors and combustible Dusts, please reference The National Fire Protection Association Standards, Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas. National Fire Protection, NFPA 497 Flammable Gases, Liquids, or Vapors and NFPA 499 Combustible Dusts 187 Hazardous Location Class I, II, III, Hazardous Locations CLASSES GROUPS I Gasses, Vapors and Liquids (Art.501) A: Acetylene B: Hydrogen, etc. C: Ether, etc. D: Hydrocarbons, fuels, solvents, etc. II Dusts (Art.502) E: Metal dusts (conductive, and explosive) F: Carbon dusts (some are conductive, and all are explosive) G: Flour, starch, grain, combustible plastic or chemical dust (explosive) III Fibers and Flyings (Art.503) Textiles, wood-working, etc. (easily ignitable, but not likely to be explosive) Hazardous Location Product Designs Threaded Joints The use of threaded joint construction allows for the gases to be vented and cooled. The hot flaming gases travel from inside the enclosure over the threads reducing the temperature and venting below the ignition point of the surrounding atmosphere. Purpose of Seals Seals minimize the passage of gases and vapors, prevent the passage of flame and complete the explosion proof enclosure system. 188 Hazardous Location DIVISION 1 DIVISION 2 Normally explosive and hazardous Not normally present in an explosive concentration (but may accidentally exist) Normally explosive and hazardous Not normally present in an explosive concentration (but may accidentally exist) Handled or used in manufacturing Stored or handled in storage (exclusive of manufacturing) OUTSIDE INSIDE 189 Hazardous Location Class I All boxes and fittings in Class I, Division I must be approved and marked for its Class and Division. All threaded joints must have at least five threads fully engaged. Bridgeport EYS and EYS-N sealing fittings are used to seal conduit in a hazardous location to minimize the passage of gases and vapors and prevent the passage of flames from one electrical installation to another thru the conduit or raceway. Typical Class I Applications Petrochemical plants Petroleum refining facilities Aircraft hangers Spray finishing areas Dry cleaning facilities Gas manufacturing facilities Gas pumping stations Class I, Division 1 Areas in which ignitable concentrates of flammable gases, liquids, vapors, are present under normal operating conditions or may exist frequently because of repair or maintenance operations or because of leakage. Class I, Division 2 Areas in which ignitable concentrates of flammable gases, liquids, vapors, are present under abnormal conditions such as accidental rupture of a container or closed system or abnormal ventilating equipment. Class I Groups Class I gases and vapors are divided into four groups by the National Electrical Code, A, B, C, and D (NFPA Standard 497). 190 Hazardous Location Conduit Sealing Class I 1) Entering Enclosures. Seals are required to be installed within 18 inches on any conduit system entering an enclosure which contains devices that may produce arcs, sparks, or high temperature that are considered to be an ignition source in normal operation. Where two enclosures are connected by a run of conduit not over three feet in length, a single seal located at the center of the conduit run is considered satisfactory. Only explosion proof unions, couplings, reducers, elbows, conduit bodies, and outlet boxes shall be permitted between the sealing fitting and the explosionproof enclosure. NEC Art 501.15 (A) (1) 2) Seals shall be located within 18 inches of the enclosure or fitting on each conduit run 2 inch trade size or larger entering an enclosure or fitting that contains terminals, splices, or taps. NEC Art 501.15 (A) (1) 3) In Pressurized Enclosures each conduit entry into a pressurized enclosure where the conduit is not pressurized as part of the protection system. Conduit seals shall be installed within 18 inches from the pressurized enclosure. NEC Art 501.15 (A) (1) 4) Boundary Seals must be installed at boundaries between a Hazardous and Non-Hazardous area and between a Class I Div. 1 area and a Class I Div. 2 area. NEC Art 501.15 (A) (4) Flexible Connections Where flexibility is needed, Flexible Metal Conduit with listed fittings, Liquidtight Flexible Metal Conduit with listed fittings, Liquidtight Flexible Nonmetallic Conduit with listed fittings, or Flexible cord listed for extra hard usage and provided with listed bushed fittings shall be used. NEC Art 501.10 (B) (2) 191 Hazardous Location Class II Class II locations are those that are hazardous because of the presence of combustible dust. Typical Class II Applications Flour and feed mills Grain elevators and Silos Fireworks manufacturing facility Sugar and cocoa processing plants Magnesium and aluminum manufacturing facilities Coal handling facilities Confectionary producer Pharmaceutical plants Starch processing plants Class II, Division 1 In which combustible dust is in the air under normal operating conditions in quantities sufficient to produce explosive or ignitable mixture Class II, Division 2 In which combustible dust is in the air under abnormal operating conditions in quantities sufficient to produce explosive or ignitable mixture or interfere with the safe dissipation of heat from electrical equipment or could be ignitable by abnormal operation or failure of electrical equipment. Class II Groups Class II combustible dusts are divided into three groups by the National Electrical Code, E, F, and G (NFPA Standard 499) Conduit Sealing in Class II Where a raceway provides a path between an enclosure which is required to be dust-ignition proof and one which is not, suitable means must be installed to prevent the entrance of dust into the dust-ignition proof enclosure through the conduit or raceway. NEC Art 502.15 192 Hazardous Location Flexible Connections Where flexibility is needed, Flexible Metal Conduit with listed fittings, Liquidtight Flexible Metal Conduit with listed fittings, Liquidtight Flexible Nonmetallic Conduit with listed fittings, or Flexible cord listed for extra hard usage and provided with listed bushed fittings. Where flexible cords are used they shall comply with 502.140. NEC Art 502.10 (A) (2) Class III Locations that are hazardous because of easily ignitable fibers or flyings are present, but in which such fibers or flyings are not likely to be in suspension in the air in quantities to produce ignitable mixtures. NEC Art 500.5(E) Typical Class III Applications Textile mills Woodworking plants Cotton mills Flax processing plants Clothing manufacturing Thread and yarn mills Class III, Division 1 Areas where easily ignitable fibers/flings are handled, manufactured, or used Class III, Division 2 Areas where easily ignitable fibers/flings are stored or handled, other than in process of manufacture. Boxes and Fittings All boxes and fittings shall be Dust Tight. NEC Art 503.10 (A) (1) Flexible Connections Where flexibility is needed, dust-tight flexible connectors, Liquidtight flexible metal conduit and nonmetallic conduit with listed fittings or flexible cord in compliance 503.140 shall be used. NEC Art 503.10 (A) (2) 193 Hazardous Location Fill Line Horizontal Pouring Sealing Compound Fiber Damming And Pouring Application: • Sealing compound is used to restrict the passage of gasses, vapors, or flames from traveling through the sealing fitting and prevent the passage of flames from one electrical installation to another through the conduit or raceway. • Fiber is used to separate conductors from each other and from the sealing compound. The fiber then forms a dam within the sealing fittings that allows the poured sealing compound to harden in place. • The sealing compound expands slightly to form a complete seal. Hermetic sealing compound (CE-2571) is listed for use with Bridgeport type EYS and EYS-N sealing fittings. • Maximum number and size of THW conductor: 1/2” 3/4” 1” 7#18 10#16 10#14 1-1/4” 1-1/2” 2” 13#10 10#8 10#6 Based on 25% conductor fill Instructions: Pack around conductors and mix contents perfectly before each use. • Separate each conductor; with Bridgeport FB-10 fiber pack around and between each conductor and wall of the fitting. The conductors must not touch one another nor touch the wall of the fitting. 194 Hazardous Location Fill Line Vertical Pouring Sealing Compound Fiber Damming And Pouring • Add 1 part of cold water to 3 parts compound by volume, thoroughly stir and pour it into sealing fitting carefully using a stick to distribute through the pouring plugs. In the Vertical position, the compound is level with the last thread in the vertical pouring plug. Note: Fill lines. In a Horizontal position, the compound is covering the last two threads in the Horizontal pouring plug. Note: Fill Lines. Be sure not to leave any air bubbles into the sealing compound. Close the plugs in the sealing fitting after pouring. Bridgeport sealing fittings are designed to meet the 5/8” min. thickness required by its listing and the NEC. CAUTION: Close the container lid firmly after each use. Carefully store the unused compound. Humid or moisture conditions, and impurities may produce a faulty seal. • Do not mix the compound with water in amounts that cannot be used within 15 minutes, nor temperatures below 35° F (1.7°C). If the compound starts to set do not attempt to thin it by adding water or stirring, this procedure spoils the compound. • The curing time varies with ambient temperature. For example: 68°F (20°C)-12 hours, 40°F (4.4°C)-72 hours. • For Group A installations, sealing compound must be allowed 72 hours to cure. • When fully cured the sealing compound is resistant to solvents, acids, water, and oil. 195 Hazardous Location Summary: Regardless of the cause of a hazardous location, it is necessary that every precaution be taken to guard against ignition of the atmosphere. Electrical equipment can be a potential source of ignition through one of three ways: 1. Archs and sparks 2. High temperatures 3. Electrical equipment failure Bridgeports Hazardous location products are designed and constructed to eliminate the potential for ignition of the atmosphere. The National Electrical Code is the “Bible” of the Electrical Industry, and the primary source of reference for hazardous locations. The NEC is also the basis for OSHA standard 1926.407, Hazardous (Classified) Locations. There are several OSHA standards that require the installation of electrical wiring and equipment in hazardous (classified) locations according to the requirements of Subpart K, Electrical. The NEC should be consulted as a supplement to the OSHA standards for additional background information concerning hazardous locations. 196 Hazardous Location Vertical/Horizontal Sealing Fitting EYS-0452N Male/Female EYS-0452 Female/Female Used to seal conduits in vertical or horizontal runs to minimize the passage of gases and vapors and prevent the passage of flames. Threaded for rigid or IMC. NPT Tapered threads. 25% conductor fill. Epoxy coat finish. UL Listed for use with Bridgeport CE-Sealing Compound. File No. E198859 Certified 105795 Class I, Division 1 and 2, Groups C, D Class II, Groups E, F, G Class III Die Cast Aluminum Copper-free (4/10 of 1%) Catalog Trade Number Size. EYS-0452 EYS-0453 EYS-0550 EYS-2633 EYS-2634 EYS-2635 EYS-0452N EYS-0453N EYS-0550N EYS-2633N EYS-2634N EYS-2635N 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” Unit Qty. Std. Pkg. Qty. 5 5 5 2 1 1 5 5 5 2 1 1 20 20 20 10 5 5 20 20 20 10 5 5 197 Hazardous Location Outlet Boxes Type GRE Type GRB Type GRC Type GRT Type GRX Type GRXZ Type GRL Die Cast Aluminum Copper-free (4/10 of 1%) Catalog Number Description Unit Qty. Std. Pkg. Qty. GRB-0445 GRB-0446 GRB-0584 GRB-0597 GRB-0600 GRB-0605 1/2" 2-Hub Round Outlet Box 3/4" 2-Hub Round Outlet Box 1" 2-Hub Round Outlet Box 1 1/4" 2-Hub Round Outlet Box 1 1/2" 2-Hub Round Outlet Box 2" 2-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 GRC-0443 GRC-0444 GRC-0556 GRC-0589 GRC-0561 GRC-0580 1/2" 2-Hub Round Outlet Box 3/4" 2-Hub Round Outlet Box 1" 2-Hub Round Outlet Box 1 1/4" 2-Hub Round Outlet Box 1 1/2" 2-Hub Round Outlet Box 2" 2-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 GRE-0447 GRE-0448 GRE-0582 GRE-0587 GRE-0598 GRE-0603 1/2" 1-Hub Round Outlet Box 3/4" 1-Hub Round Outlet Box 1" 1-Hub Round Outlet Box 1 1/4" 1-Hub Round Outlet Box 1 1/2" 1-Hub Round Outlet Box 2" 1-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 GRL-0439 GRL-0440 GRL-0546 GRL-0591 GRL-0558 GRL-0576 1/2" 2-Hub Round Outlet Box 3/4" 2-Hub Round Outlet Box 1" 2-Hub Round Outlet Box 1 1/4" 2-Hub Round Outlet Box 1 1/2" 2-Hub Round Outlet Box 2" 2-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 198 Hazardous Location Used to provide access to conductors for pulling and maintenance. Allows connection of conduit straight runs, branch conduit runs, and bends. For rigid conduit. NPT Tapered threads. Epoxy coat finish File No. E181329 Certified 105795 Class I, Division 1 and 2, Groups C, D Class II, Groups E, F, G Class III Type 3, 4, 7, 9 Catalog Number Description Unit Qty. Std. Pkg. Qty. GRT-0441 GRT-0442 GRT-0547 GRT-0593 GRT-0559 GRT-0578 1/2" 3-Hub Round Outlet Box 3/4" 3-Hub Round Outlet Box 1" 2-Hub Round Outlet Box 1 1/4" 3-Hub Round Outlet Box 1 1/2" 3-Hub Round Outlet Box 2" 3-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 GRX-0449 GRX-0450 GRX-0585 GRX-0595 GRX-0601 GRX-0606 1/2" 4-Hub Round Outlet Box 3/4" 4-Hub Round Outlet Box 1" 4-Hub Round Outlet Box 1 1/4" 4-Hub Round Outlet Box 1 1/2" 4-Hub Round Outlet Box 2" 4-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 GRXZ-0468 GRXZ-0469 GRXZ-0586 GRXZ-0596 GRXZ-0602 GRXZ-0607 1/2" 5-Hub Round Outlet Box 3/4" 5-Hub Round Outlet Box 1" 5-Hub Round Outlet Box 1 1/4" 5-Hub Round Outlet Box 1 1/2" 5-Hub Round Outlet Box 2" 5-Hub Round Outlet Box 1 1 1 1 1 1 4 4 4 2 2 2 199 Hazardous Location Die Cast Aluminum Unions Used to join conduit, or conduit to enclosures or other devices without rotation of the conduit. Allows access and removal of system components. Threaded for rigid or IMC. NPT tapered threads. Epoxy coat finish. Die Cast Aluminum File No. E198859 Copper-free (4/10 of 1%) Catalog Trade Unit Std. Pkg. Number Size. Qty. Qty. Certified 105795 Class I, Groups C, D Class II, Groups E, F, G Class III Type 3, 4, 7, 9 TU-2992 1/2” TU-2993 3/4” TU-2994 1” TU-2995 1 1/4” TU-2996 1 1/2” TU-2997 2” 5 5 5 2 2 1 20 20 20 10 10 5 Steel Hazardous Location Unions UNF-1S UNY-1S Used to join conduit, or conduit to enclosures or other devices without rotation of the conduit. Allows access and removal of system components. Threaded for rigid or IMC. NPT tapered threads. File No. E312219 Class I, Division 1 and 2, Groups A, B, C, D Class II, Groups E, F, G Class III Type 3, 4, 7, 9 Zinc Plated Steel 200 Catalog Number Trade Size. Unit Qty. Std. Pkg. Qty. UNF-1S UNF-2S UNF-3S 1/2” 3/4” 1” 5 5 5 20 20 20 UNY-1S UNY-2S UNY-3S 1/2” 3/4” 1” 5 5 5 20 20 20 Hazardous Location Threaded Insert Plugs For use with hazardous location sealing fittings and outlet boxes to close up taped holes or hubs. Threaded NPT. File No. E198859 Certified 105795 Class I, Division 1 and 2, Groups C, D Class II, Groups E, F, G Class III Die Cast Aluminum Copper-free (4/10 of 1%) Catalog Trade Number Size. Unit Qty. Std. Pkg. Qty. TA-2943 TA-2938 TA-2937 TA-2636 TA-2637 TA-2638 25 25 20 20 10 10 100 100 80 80 40 40 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 201 Hazardous Location Steel Reducing Bushings Use to reduce the size of a taped hole or hub. NPT tapered threads. File No. E312219 Class I, Division 1 and 2, Groups A, B, C, D Class II, Groups E, F, G Reducing Bushings Catalog Number Description Unit Qty. Std. Pkg. Qty. 1161-HZ 1162-HZ 1163-HZ 1164-HZ 1165-HZ 1166-HZ 1167-HZ 1168-HZ 1169-HZ 1170-HZ 1171-HZ 1172-HZ 1173-HZ 1174-HZ 1175-HZ 3/4” x 1/2” Reducing Bushing 1” x 1/2” Reducing Bushing 1” x 3/4” Reducing Bushing 1 1/4” x 1/2” Reducing Bushing 1 1/4” x 3/4” Reducing Bushing 1 1/4” x 1” Reducing Bushing 1 1/2” x 1/2” Reducing Bushing 1 1/2” x 3/4” Reducing Bushing 1 1/2” x 1” Reducing Bushing 1 1/2” x 1 1/4” Reducing Bushing 2” x 1/2” Reducing Bushing 2” x 3/4” Reducing Bushing 2” x 1” Reducing Bushing 2” x 1 1/4” Reducing Bushing 2” x 1 1/2” Reducing Bushing 25 25 20 20 20 20 10 10 10 10 10 10 10 10 10 100 100 80 80 80 80 50 50 50 50 50 50 50 50 50 202 Hazardous Location Sealing Compound with Fiber Kit Fiber is used to separate conductors from each other and from the sealing compound. The fiber then forms a dam within the sealing fittings that allows the poured sealing compound to harden in place. The sealing compound provides a seal between and around the conductors within the fittings. UL Listed for use with Bridgeport EYS and EYS-N series sealing fittings. Sealing Materials Catalog Number CE-2571 Unit Size 2.2 lb Qty. 1 Std. Pkg. Qty. 4 Fiber Fiber is used to separate conductors from each other and from the sealing compound. The fiber then forms a dam within the sealing fittings that allows the poured sealing compound to harden in place. Sealing Materials Catalog Number FB-10 Unit Size 3.52 oz Qty. 1 Std. Pkg. Qty. 4 203 Specialty Products Jack Chain 701 703 Maximum safe load is 25 lbs. Catalog 703 provided in convenient 300’ bucket. Steel Catalog Number Size Description Std. Pkg. Qty. 701 703 #12 #12 100' Spool 300’ Bucket 800' 300’ Size Unit Qty. Std. Pkg. Qty. 1 1/4” 100 1000 “S” Hooks Maximum safe load is 25 lbs. Steel Catalog Number 705 Safety Plates Protects cable running through wooden studs from nails and screws. File No. E161206 Galvanized Steel 204 Catalog Number Unit Qty. Std. Pkg. Qty. 732-SP 100 500 Specialty Products Protector Strip Provides physical protection in minimum depth walls for nonmetallic-sheath cables in accordance with 2008 National Electrical Code. Shields low voltage cables and similar cabling subjected to damage or hidden in shallow recessed walls. May be used in exposed or concealed locations. Slots provided to secure cable as required by National Electrical Code article 334.30. Zinc electroplated. .063” thick steel, 3-foot length. Patented. File No. E161206 Steel Catalog Number Unit Qty. Std. Pkg. Qty. 733-PS --- 20 205 Specialty Products Anti-Short Bushings “Redheads” “Redheads” prevent damage to wire insulation when placed between the wire and armored sheath. File No. E11259 File No. LR24719M5 Polyethylene - 90°C Catalog Number Trade Size AC/MC Cable Size Flex Trade Size Unit Qty. Std. Pkg Qty. 1000 0 14/2,14/3,12/2 5/16” 50 7000 1001 1 14/4,12/3,6/1,4/1 3/8” 50 3500 1002 2 12/4,10/2,10/3,2/1 --- 50 7000 1003 3 10/4,8/2,8/3,1/1 1/2” 20 2000 1004 4 8/4,6/2,6/3, 3/4” 20 1600 1005 5 --- 1” 25 100 1006 6 --- 1 1/4” 10 40 1007 7 --- 1 1/2” 10 40 1008 8 --- 2” - 2 1/2” 10 40 4/2,4/3,6/4 206 Specialty Products Box Connectors Used as a raceway between two boxes. File No. E11259 File No. LR39354 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1191-DC2 1/2” 50 500 Knockout Plugs Steel Plastic To cap unused knockout holes in box or enclosure. Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 1691 1692 1693 1694 1695 1696 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 50 50 50 20 1000 1000 500 200 200 200 Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. 9891 9892 9893 9894 9895 9896 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 50 50 25 20 1000 1000 500 500 250 100 Plastic 207 Specialty Products Box Supports Use to support FS box, outdoor lighting fixture, or similar devices, per NEC Article 370-23 requirements. Tapered threads (NPT) provide raintight seal. Simply assemble box support onto the box or fixture and fasten to steel 1/2” rigid conduit or water pipe driven into the ground. File No. E161206: BS-050 Zinc Die Cast Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. BS-050 BS-075 1/2” 3/4” 25 25 100 100 Electrical Box Extender / Insulator BXE-100 BXE-300 For use with most metallic or nonmetallic electrical boxes to extend box face. Simply slide non-conductive extender into box to correct setbacks up to 1”. May also be used as an insulating barrier between metallic box and device. Extender / Insulator does not require trimming and is completely hidden by faceplate. Complies with NEC Article 314.20. Patented. File No. E216710 Available in single gang BXE-100, duplex BXE-200 or round BXE-300 configurations. PVC 208 Catalog Number Unit Qty. Std. Pkg. Qty. BXE-100 BXE-200 BXE-300 25 ----- 100 25 25 Specialty Products Duct Seal Used to seal around boxes, flashings and service entries. #1003 asbestos-free sealing compound is pliable, non-corrosive to metals and can be painted. For both indoor and outdoor use. File No. R14730 Catalog Number Slug Size Std. Pkg. Qty. DS-100 DS-500 1 lb. 5 lb. 50 Slugs 10 Slugs Steel Expansion Couplings for EMT Low cost and easy to use. Assembles like a regular EMT set screw coupling. Use to compensate plus or minus 2” lateral movement of conduit in dry locations. Available for use with trade size 3/4” thru 4” steel EMT. To install simply slide coupling end stop onto fixed end of EMT and tighten set screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. May be used with optional Bonding Jumper Assembly cat. nos. BJ-100, BJ-200 and BJ-400. US Patent 6,715,803,B1 File No. E24001 Zinc Plated Steel Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. EC-075 EC-100 EC-125 EC-150 EC-200 EC-250 EC-300 EC-350 EC-400 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 3 1/2” 4” 15 10 8 6 ----------- 60 40 40 30 4 1 1 1 1 2-1/2” thru 4” suitable for use with EMT or rigid conduit. 209 Specialty Products Firestop A water-based, non-corrosive, non-toxic, odorless quality intumescent. The FS-1000 is rated 3000°F for 8 hours. The FS500R is rated 2000°F for 4 hours. Adheres to most construction materials including ceramics, composites, masonry, metal, plastic and wood. Can be safely removed with soap and water prior to curing. Paintable and sandable. Classified by Underwriters Laboratories as a non-combustible product in compliance with zero flame and zero smoke index. File No. R25422 Intumescent Catalog Number Cartridge Size Unit Qty. Std. Pkg. Qty. FS-500R 10.5 fluid ounces 10.5 fluid ounces 1 12 1 12 FS-1000 210 Specialty Products Low Voltage Device Holders for New Work NMLV-100B NMLV-100F NMLV-200B NMLV-200F NMLV-100F and NMLV-200F used on 3/4” thick furring strips, 2” x 4” wood or steel stud. Provided with 2 nails for use on 2” x 4” wood stud. Use #6 flat head screws for steel stud or 3/4” thick furring strip. NMLV-100B and NMLV-200B used on 2” x 4” wood or steel stud with 1/2” or 3/4” EMT. Provided with 2 nails for use on 2” x 4” wood stud. Use #6 flat head screws for steel stud. Steel bracket will accommodate 1/2” or 3/4” EMT connector. Patented. File No. E11259 PVC Catalog Number NMLV-100B NMLV-100F NMLV-200B NMLV-200F Trade Size Unit Qty. Std. Pkg. Qty. Single Gang Single Gang Double Gang Double Gang 5 10 5 5 500 100 50 50 211 Specialty Products Roof Flashings RF-125 thru RF-250 RFN-125 thru RFN-400 Galvanized – for use with galvanized, plastic, or cast iron electrical service mast. Fits flats to 40º. Neoprene – for use with copper, cast iron, galvanized, or plastic pipe. Fits up to 45º angle, not recommended for hot-mopped or built-up roofs. Galvanized Catalog Number Size Unit Qty. Std. Pkg. Qty. RF-125 RF-150 RF-200 RF-250 1 1/4” 1 1/2” 2” 2 1/2” ------------- 25 25 25 25 Catalog Number Size Unit Qty. Std. Pkg. Qty. RFN-125 RFN-200 RFN-250 RFN-300 RFN-400 1 1/4” - 1 1/2” 2” 2 1/2” 3” 4” ---------------- 12 12 12 12 12 Neoprene 212 Specialty Products Swivel Fixture Hangers SFR-75 SFS-75 Ball type swivel fixture covers for mounting pendant or fluorescent lighting fixtures to box. For lamps up to 50 lbs. maximum and 20° maximum swing from vertical. Tapped for use with 3/4” thread and furnished with 3/4” x 1/2” steel reducing bushing. Slotted cover holes for easy assembly to box. Malleable iron swivel, steel cover. File No. E235970 4” Square Box Cover Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. SFS-75 3/4” 1 10 4” Round or Octagonal Box Cover Catalog Number Trade Size Unit Qty. Std. Pkg. Qty. SFR-75 3/4” 1 10 213 Technical Guide HOW TO USE THIS GUIDE This guide has been developed as an easy to use, technical reference for specifiers, contractors, and inspection authorities. It is intended for use as a guide in the selection of electrical fittings manufactured by Bridgeport Fittings, Inc. Do not use this manual as an interpretation of the National Electrical Code or local regulations. Always consult your local electrical inspector for requirements in your area. Underwriters Laboratories, Canadian Standards Association, and Federal Specifications are current at time of publication, but are subject to change without prior notice. Current listings are noted on the smallest unit carton label. Look for the appropriate logo. Due to ongoing product improvements or code changes, specifications and dimensions are subject to change without prior notice. For current product dimensions, consult our on-line catalog at www.bptfittings.com, or contact us. For further assistance regarding information included in this guide, please call our Engineering Department at 203.377.5944. DETAILED STANDARDS The standards by which conduit fittings are manufactured are maintained on a current basis at the Bridgeport factory. (See Appendix IV) All questions relating to the application of these standards are welcomed. Included are relevant Underwriters' laboratories standards, Federal Specifications, and ASTM and ANSI Standards. See Appendix I, II, & III to determine the applicability of appropriate CSA, UL, NEMA, and Federal Specifications identification, standard and file numbers. 214 Technical Guide NEC REFERENCES National Electrical Code articles are referenced here. Included are those parts pertaining directly to use of fittings supplied by Bridgeport, together with those parts pertaining to conduits and cables for which such fittings are designed. If you or your specifying engineers have any further questions about the application or interpretation of the NEC installations involving Bridgeport fittings, please call Bridgeport’s engineering department. Occasionally, contractors can make use of factory personnel or other resources to permit the use or substitution of Bridgeport for a specified brand or material of construction. This may enable you to standardize floor and truck inventories in order to simplify material specification and inventory investment. DISSIMILAR METALS The NEC requires, where applicable, dissimilar metals in contact anywhere in the system shall be avoided to eliminate the possibility of galvanic action (NEC Articles 110.14 & 250.70), Steel EMT, steel rigid conduit, steel straps and hangers, and steel outlet and junction boxes are almost universally plated or coated with zinc or other corrosion inhibitor. Wherever Bridgeport’s fittings come in contact with these raceway components, similar metals are touching, since the fittings themselves are constructed of zinc or have zinc-plated steel parts. Use of our products in the application for which they are designed, will be compliant to this requirement. 215 Technical Guide RoHS COMPLIANCE & ENVIRONMENTAL STATEMENTS The directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (commonly referred to as the Restriction of Hazardous Substances Directive or RoHS) was adopted in February 2003 by the European Union. The RoHS directive took effect on July 1, 2006, and is required to be enforced and become law in each member state of the EU. This directive restricts the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic e-waste. The following substances are restricted by RoHS: 1. 2. 3. 4. 5. 6. Lead Mercury Cadmium Hexavalent chromium (chromium xxx or Cr6+) Polybrominated biphenyls (PBB) Polybrominated diphenyl ether (PBDE) 216 Technical Guide All of Bridgeport’s products comply with the RoHS Directive. As a side note, many of our products are exempt from the RoHS Directive, as they are typically used in fixed industrial/commercial buildings and equipment. Bridgeport Fittings, Inc. is committed to being environmentally responsible. We have obtained and maintain the proper permits, and have proper waste disposal processes and procedures in place to make sure we are compliant with all local, state, and federal environmental regulations. We also recycle our zinc scrap in house to reduce our impact on the environment. Bridgeport Fittings, Inc. does not use any Ozone Depleting Substances in the manufacture of its products. 217 Technical Guide APPENDIX I Listing File Numbers CATEGORY Armored Cable Connectors, Type AC Armored Cable Connectors, Type AC Certified for Canada Caulking and Sealants Certified for Canada Caulkings and Sealants Conduit and Cable Hardware Conduit and Cable Hardware Certified for Canada Conduit Fittings Conduit Fittings Certified for Canada Conduit Fittings Certified for Canada Conduit Fittings for Use in Hazardous Locations Electrical Metallic Tubing Fittings Electrical Metallic Tubing Fittings Certified for Canada Metal-clad Cable Connectors, Type MC Metallic Outlet Boxes Metallic Outlet Boxes Certified for Canada Nonmetallic-sheathed Cable Connectors Optical Fiber/Communications/Signaling/Coaxial Cable Outlet Boxes Optical Fiber/Communications/Signaling/Coaxial Cable Outlet Boxes Certified for Canada Outlet Bushings and Fittings Outlet Bushings and Fittings Certified for Canada Tape, General Use Transformers, Class 2 and Class 3 Visual-signal Appliances Visual-signal Appliances Visual-signal Appliances Certified for Canada Visual-signal Appliances Certified for Canada Wire Connectors and Soldering Lugs APPENDIX II Listing File Numbers Class Class Description 9052-01 4412-01 4412-02 4412-03 4414-01 4414-03 4414-05 4414-08 4415-01 4415-02 4415-04 9085-01 4412-02 4415-02 4412-02 4414-05 4418-02 4418-03 INSULATING DEVICES AND MATERIALS-Bushings OUTLET BOXES AND FITTINGS-Bushings, Fittings CONDUIT FITTINGS-Fittings For Metal Conduit CONDUIT FITTINGS - Fittings For-Nonmetallic Conduit FITTINGS-Armored Cable FITTINGS-Electrical Metallic Tubing (EMT) - Steel FITTINGS-Non-Metallic Sheathed Cable FITTINGS-Cable - Hardware STAPLES AND STRAPS-Armored Cable STAPLES AND STRAPS-Conduit STAPLES AND STRAPS-Electrical Metallic Tubing (EMT) AUTHORIZED PACKAGERS OF CSA CERTIFIED PRODUCTSCONDUIT FITTINGS-Fittings For Metal Conduit STAPLES AND STRAPS-Conduit CONDUIT FITTINGS-Fittings For Metal Conduit FITTINGS-Non-Metallic Sheathed Cable OUTLET BOXES AND FITTINGS-Boxes - For Hazardous Locations CONDUIT FITTINGS-Fittings - For Hazardous Locations APPENDIX III Bridgeport products listed by Underwriters Product Group Rigid & IMC Conduit Bodies Rigid & IMC Conduit Fittings EMT Fittings Liquid Tight Fittings Portable Cord Fittings Flexible Metal & AC/MC Cable Fittings Non-Metallic Cable Fittings Grounding Fittings Service Entrance Fittings 218 UL Standard UL-514A UL-514B UL-514B UL-514B UL-514B UL-514B UL-514B UL-467 UL-514B Technical Guide FILE No. E20534 E20534 R25422 R25422 E161206 E161206 E191572 E24001 E191572 E312219 E24001 E24001 E191676 E11077 E11077 E11698 E302367 E302367 E11259 E11259 R14730 E308949 E312242 E305841 E312242 E305841 E155561 File Number 71053 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 039354_0_000 052255_0_000 702847 702847 74878 74878 237741 237741 Laboratories & CSA comply with the following specifications: NEMA Federal CSA Standard Standard Specification C22.2 18.3-04 FB-1 A-A-50563 C22.2 18.3-04 FB-1 A-A-50553 C22.2 18.3-04 FB-1 A-A-50553 C22.2 18.3-04 FB-1 A-A-50552 C22.2 18.3-04 FB-1 A-A-50552 C22.2 18.3-04 FB-1 A-A-50552 C22.2 18.3-04 C22.2 18.3-04 C22.2 18.3-04 FB-1 FB-1 FB-1 A-A-50552 A-A-50552 A-A-50563 219 Technical Guide APPENDIX IV Summary of current technical standards maintained on file by Bridgeport Fittings engineering department*: Governing Body American National Standards Institute (ANSI) American Society for Testing and Materials (ASTM) Canadian Standards Association (CSA) Governing Body Underwriters Laboratories, Inc. (UL) United States of America Federal Specifications United States of America Military Specifications Standard No. Z540 NEMA FB 1 ANSI Z1.4-A971 ASTM ASTM ASTM ASTM C22.2 C22.2 C22.2 C22.2 B86 B117 B240 B633 No. 0 No.18 No. 25 No. 30 Standard No. UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL 1 3 4 6 62 94V 360 467 486A 486B 514A 514B 514C 651 651A 719 746A 7468 746C 746D 797 869 870 886 A-A-50552 A-A-50553 A-A-50563 MIL-Q-9858 MIL-I-45208 MIL-C-45662 * If required, other standards may be obtained as needed. 220 Technical Guide APPENDIX V Bridgeport Fittings, Inc. Other Raw Material Specifications Steel, SAE 1050 Series (Fittings, covers, brackets, straps) Mechanical Properties Tensile Strength, Yield (PSI) Elongation Ultimate % Hardness (Rockwell) (varies by temper) 45000-90000 0-39 B55 to B90 Plastic, Polypropylene (Insulating Bushings, Metaliners, Insulators, Lock-A-Liners) Mechanical Properties Tensile Strength, Yield (PSI) Elongation Ultimate % Impact Strength Izod, Notched (Ft.-Lb./In.) Hardness 3600-4200 3-15 2.2 R60-R105 Plastic, Polypropylene, High Density (Liquid Tight Gland Seals and Pull Caps) Mechanical Properties Tensile Strength, Yield (PSI) Elongation Ultimate % Impact Strength Izod, Notched (Ft.-Lb./In.) Hardness 3400-3800 600-900 1.2-2.0 D60-70 Plastic, Polypropylene, Medium Density (Liquid Tight Knockout Gaskets, Anti-Short Bushings) Mechanical Properties Tensile Strength, Yield (PSI) Elongation Ultimate % Impact Strength Izod, Notched (Ft.-Lb./In.) Hardness 2000 200 ---D55 Plastic, Electrical Grade Rigid PVC (Box Extenders, device holders) Mechanical Properties Tensile Strength, PSI Ultimate Elongation, % Flexural Strength, PSI Flexural Modulus, PSI Heat Deflection Temp. (1/8” Un-annealed) ASTM Method 6200 150 11900 435000 158ºF(70ºC) D638 D638 D790 D790 D648 221 Technical Guide APPENDIX VI Bridgeport Fittings, Inc. Casting Alloy Material Specifications Die Cast Zinc, Alloy #7 (ZAMAK) Mechanical Properties (as cast) Tensile Strength, PSI Impact Strength - Ft./Lbs. Charpy Brinell Hardness, 500kg 20mm 30 sec Elongation in 2”, % Shear Strength, PSI Compressive Strength Mod. of Rupture, PSI 41000 40 76 14 31000 60000 95000 Physical Properties Melting Point (ºF) Density (Lbs./Cu. In.) Coefficient of Thermal Expansion (uIn./In. x 10 - 6 Deg. F) Specific Conductivity Thermal Conductivity (Cal./Sec. Sq.-Cm./Degrees C) Elec.Conductivity,%Cu Std. 728 .240 15.2 .10 .27 26 Chemical Compositions % Al Mg Cu Max. Fe Max. Pb Max. Cd. Max Sn Max. Ni Zn* 3.5 - 4.3 .005 - .020 .25 .075 .003 .002 .001 .005 - .020 Remainder *99.99+ % Purity Note: Zinc base alloy ingot for die casting may contain nickel, chromium, silicon, and manganese in amounts up to their solubility (0.02%, 0 02%, 0 035%, and about 0 5% respectively) at the freezing temperature. No harmful effects have ever been noted due to the presence of these elements in these concentrations, and therefore analyses are not required for these elements. 222 Technical Guide Die Cast Zinc, Alloy #3 (ZAMAK) Mechanical Properties (as cast) Tensile Strength, PSI Impact Strength - Ft./Lbs. Charpy Brinell Hardness, 500kg 20mm 30 sec Elongation in 2”, % Shear Strength, PSI Compressive Strength Mod. of Rupture, PSI 41000 40 76 14 31000 60000 95000 Physical Properties Melting Point (ºF) Density (Lbs./Cu. In.) Coefficient of Thermal Expansion (uIn./In. x 10 - 6 Deg. F) Specific Conductivity Thermal Conductivity (Cal./Sec. Sq.-Cm./Degrees C) Elec.Conductivity,%Cu Std. 728 .240 15.2 .10 .27 26 Chemical Compositions % Al Mg Cu Max. Fe Max. Pb Max. Cd. Max Sn Max. Ni Zn* 3.5 - 4.3 .020 - .05 .25 .10 .005 .004 .003 – Remainder *99.99+ % Purity Note: Zinc base alloy ingot for die casting may contain nickel, chromium, silicon, and manganese in amounts up to their solubility (0.02%, 0 02%, 0 035%, and about 0 5% respectively) at the freezing temperature. No harmful effects have ever been noted due to the presence of these elements in these concentrations, and therefore analyses are not required for these elements. 223 Technical Guide APPENDIX VI (continued) Sand Cast Zinc, Alloy ZA-12 Mechanical Properties (as cast) Tensile Strength, PSI Yield Strength .2% Offset, PSI Elongation in 2”, % Brinell Hardness 40000-45000 3000 1-3 92-96 Physical Properties Melting Point (ºF) Density (Lbs./Cu. In.) Elec.Conductivity (% IACS) 710-810 .218 25 Chemical Compositions % Al Mg Cu Zn 11 .02 .75 Remainder Die Cast Aluminum, Alloy 380 Mechanical Properties (as cast) Tensile Strength, PSI Yield Strength, PSI Elongation in 2”, % Brinell Hardness 46000 23000 2.5 80 Physical Properties Solid temperature Range, (ºF) Density (Lbs./Cu. In.) Electrical Conductivity (% IACS) 1000-1100 .098 23 Chemical Compositions % Si Cu Mg Max. Zn Max. Fe Max. Mn Max. Al 7.5-9.5 3.0-4.0 0.10 3.0 2.0 0.50 Remainder Sand Cast Malleable Iron, Ferretic Mechanical Properties (as cast) Min. Tensile Strength, PSI Min. Yield Strength, PSI Min. Elongation in 2”, % Brinell Hardness 50000 32000 10 156 Standards ASTM Spec. A-47-77 SAE Spec. J158 224 Grade 32510 Grade M3210 Technical Guide Sand Cast Ductile Iron Mechanical Properties (as cast) Min. Tensile Strength, PSI Min. Yield Strength, PSI Min. Elongation in 2”, % 60000 40000 18 Standards ASTM A536-80 MIL-I-11466 Grade 32510 Class 6 Sand Cast Yellow Brass Mechanical Properties (as cast) Min. Tensile Strength, PSI Min. Yield Strength, PSI Min. Elongation in 2”, % 38000 – 17 Standards Commercial Grade Sand Cast Red Brass (Bronze) Mechanical Properties (as cast) Min. Tensile Strength, PSI Min. Yield Strength, PSI Min. Elongation in 2”, % 37000 – 17 Standards ASTM B-62-52, B-145-52-4A MIL-B-16444 SAE 40 225 Technical Guide APPENDIX VII UL 797, Recommended Dimensions For EMT Conduit O.D. Trade Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" Min Max I.D. .701" .917" 1.158" 1.505" 1.735" 2.192" 2.865" 3.485" 3.980" 4.480" .711" .927" 1.168" 1.515" 1.745" 2.202" 2.885" 3.515" 4.020" 4.520" .622" .824" 1.049" 1.380" 1.610" 2.067" 2.731" 3.356" 3.834" 4.334" UL 6, Recommended Dimensions For Rigid Conduit Trade Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 5" 6" 226 Threads Per Inch 14 14 11-1/2 11-1/2 11-1/2 11-1/2 8 8 8 8 8 8 O.D. I.D. .840" 1.050" 1.315" 1.660" 1.900" 2.375" 2.875" 3.500" 4.000" 4.500" 5.563" 6.635" .622" .824" 1.049" 1.380" 1.610" 2.067" 2.469" 3.068" 3.548" 4.026" 5.047" 6.065" Technical Guide UL1, Recommended Dimensions For Flexible Metal Conduit O.D. Trade Size 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" I.D. Min. Max. Min. Max. .560" .860" 1.045" 1.300" 1.550" 1.850" 2.350" 2.860" 3.360" 3.860" 4.360" .610" .920" 1.105" 1.380" 1.630" 1.950" 2.450" 3.060" 3.560" 4.060" 4.560" .375" .625" .812" 1.000" 1.250" 1.500" 2.000" 2.500" 3.000" 3.500" 4.000" .393" .645" .835" 1.040" 1.300" 1.575" 2.080" ----------------------------- UL 360, Recommended Dimensions For Liquid Tight Flexible Steel Conduit O.D. Trade Size 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" I.D. Min. Max. Min. Max. .590" .820" 1.030" 1.290" 1.630" 1.865" 2.340" 2.840" 3.460" 3.960" 4.460" .710" .840" 1.050" 1.315" 1.660" 1.900" 2.375" 2.875" 3.500" 4.000" 4.500" .484" .622" .820" 1.041" 1.380" 1.575" 2.020" 2.480" 3.070" 3.500" 4.000" .504" .642" .840" 1.066" 1.410" 1.600" 2.045" 2.505" 3.100" 3.540" 4.040" 227 Technical Guide APPENDIX VIII Die Cast Aluminum Conduit Bodies Maximum Number of Conductors Trade Size LB C LL LR T 1/2" N/A N/A N/A N/A N/A 3/4" #6 AWG #6 AWG #6 AWG #6 AWG #6 AWG 1" 3 #4 AWG 3 #4 AWG 3 #4 AWG 3 #4 AWG 3 #4 AWG 1 1/4" 3 #2 AWG 3 #2 AWG 3 #2 AWG 3 #2 AWG 3 #2 AWG 1 1/2" 3 #2 AWG 2" 3 #4/0 AWG 3 #4/0 AWG 3 #4/0 AWG 3 #4/0 AWG 2 1/2" 3 #4/0 AWG 3 #250 MCM 3 #300 MCM 3 #300 MCM 3 #4/0 AWG 3 #4/0 AWG 3 #250 MCM 3 #350 MCM 3 #350 MCM 3 #4/0 AWG 3" 3 #1/0 AWAG 3 #1/0 AWAG 3 #1/0 AWAG 3 #1/0 AWAG 3 #4/0 AWG 3 1/2" 3 #400 MCM 3 #300 MCM 3 #350 MCM 3 #350 MCM 3 #400 MCM 4" 3 #400 MCM 3 #300 MCM 3 #350 MCM 3 #350 MCM 3 #400 MCM Volume in Cu. In. LL LR Trade Size LB C 1/2" 4.35 4.35 4.35 4.35 3/4" 7.3 7.3 7.3 7.3 7.3 1" 12.0 12.2 12.2 12.2 12.2 1 1/4" 32.3 33.5 35.8 35.8 33.1 1 1/2" 33.8 33.5 35.8 35.8 33.1 2" 71.2 69.5 69.7 69.7 67.0 2 1/2" 71.2 69.5 69.7 69.7 67.0 3" 183.5 188.0 186.0 186.0 175.0 3 1/2" 304.9 307.0 306.0 306.0 298.0 4" 308.0 309.0 308.0 308.0 300.0 228 T 4.35 Technical Guide Malleable Iron Conduit Bodies Maximum Number of Conductors Trade Size LB C LL LR T 1/2" N/A N/A N/A N/A N/A 3/4" 3 #6 AWG 3 #6 AWG 3 #6 AWG 3 #6 AWG 3 #6 AWG 1" 3 #4 AWG 3 #4 AWG 3 #4 AWG 3 #4 AWG 3 #4 AWG 1 1/4" 3 #2 AWG 3 #2 AWG 3 #2 AWG 3 #2 AWG 3 #2 AWG 1 1/2" 3 #1/0 AWG 3 #1/0 AWAG 3 #1/0 AWAG 3 #1/0 AWAG 3 #1/0 AWAG 2" 3 #4/0 AWG 3 #4/0 AWG 3 #4/0 AWG 3 #2/0 AWG 2 1/2" 3 #300 MCM 3 #300 MCM 3 #300 MCM 3 #300 MCM 3 #4/0 AWG 3" 3 #4/0 AWG 3 #350 MCM 3 #350 MCM 3 #350 MCM 3 #350 MCM 3 #4/0 AWG 3 1/2" 3 #500 MCM 3 #500 MCM 3 #500 MCM 3 #500 MCM 3 #350 MCM 4" 3 #500 MCM 3 #500 MCM 3 #500 MCM 3 #500 MCM 3 #350 MCM Volume in Cu. In. LL LR Trade Size LB C 1/2" 4.5 4.5 4.5 4.5 3/4" 7.5 7.5 7.5 7.5 7.0 1" 12.5 12.5 12.5 12.5 12.0 1 1/4" 32.3 32.3 32.3 32.3 32.0 1 1/2" 32.3 32.3 32.3 32.3 32.0 2" 73.0 73.0 73.0 73.0 70.0 2 1/2" 138.0 138.0 138.0 138.0 130.0 T 4.0 3" 170.0 170.0 170.0 170.0 168.0 3 1/2" 300.0 300.0 300.0 300.0 290.0 4" 328.0 328.0 328.0 328.0 324.0 229 Technical Guide APPENDIX IX Connector Compatibility with AFC Cable Systems® Aluminum and Steel MCI-A Snap-In Style: Cat. No. Description 380SP 3/8" Snap-In/Snap-In 38ASP 3/8" Snap-In/Snap-In, Insulated 3838SP 3/8" Duplex Snap-In/Snap-In 3838ASP 3/8" Duplex Snap-In/Snap-In, Insulated SG38SP 3/8" 1-Screw Clamp Type SG38ASP 3/8" 1-Screw Clamp Type, Insulated SG38MCIA 3/8" 1-Screw Clamp Type, Insulated SG3838ASP 3/8" Duplex 2-Strap Clamp Type, Insulated SG50SP 1/2" 1-Screw Clamp Type SG50ASP 1/2" 1-Screw Clamp Type, Insulated 840SP 3/8" 2-Screw Clamp Type 8400SP 3/8" 2-Screw Clamp Type 8400MCIA 3/8" 2-Screw Clamp Type, Insulated 845SP 3/8" 1-Side Screw Snap-In 845ASP 3/8" 1-Side Screw Snap-In, Insulated 846SP 3/8" Duplex 1-Screw Clamp Type AMC-50 3/8" Steel 1-Screw Clamp Type, Insulated AMC-50MCIA 3/8" Steel 1-Screw Clamp Type, Insulated AMC-52 3/8" Steel Duplex 1-Screw Clamp Type BL16SP 3/8" Saddle Type BL16ASP 3/8" Saddle Type, Insulated BL16MCIA 3/8" Saddle Type, Insulated 230 Technical Guide MCI-A Cable HCF MCI-A Cable 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 10/4 (.64"Ø) 10/4 (.64"Ø) 10/4 (.64"Ø) 10/4 (.64"Ø) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.52"Ø min), 12/3 (.53"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.52"Ø min), 12/3 (.53"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 231 Technical Guide APPENDIX IX (continued) Locknut Style: Cat. No. Description 545-DC2 3/8" 1-Screw Type 560-DC2 3/8" 1-Screw Clamp Type 560-DCI2 3/8" 1-Screw Clamp Type, Insulated 560-MCIA2 3/8" 1-Screw Clamp Type, Insulated 565-DC2 3/8" 2-Screw Clamp Type 566-DC2 3/8" 2-Screw Clamp Type 570-DC2 3/8" 1-Screw Clamp Type 570-DCI2 3/8" 1-Screw Clamp Type, Insulated 570-DCR2 3/8" 1-Screw Clamp Type, Round End 590-DC2 3/8" Push-In Type 590-DCI2 3/8" Push-In Type, Insulated 601-DC2 3/8" Duplex 1-Screw Clamp Type 691-DC2 3/8" Duplex 2-Screw Clamp Type 802-MCIA2 3/8" 90° 1-Screw Connector Transition Coupling: Cat. No. Description 4157-DC 3/4"-3/8" EMT to MCI-A Cable Coupling AFC Cable Systems is a registered trademark of AFC Cable Systems 232 Technical Guide MCI-A Cable HCF MCI-A Cable 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.52"Ø min), 12/3 (.53"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.52"Ø min), 12/3 (.53"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4 (.56"Ø max) 12/2 (.52"Ø min), 12/3 (.56"Ø max) MCI-A Cable 14/2 (.42"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3 (.60"Ø max) HCF MCI-A Cable 12/2 (.52"Ø min), 12/3, 10/2 (.60"Ø max) 233 Technical Guide APPENDIX X Connector Compatibility with Southwire® Aluminum Sheath MCI-A Snap-In Style: Cat. No. Description 380SP 3/8" Snap-In/Snap-In 38ASP 3/8" Snap-In/Snap-In, Insulated 3838SP 3/8" Duplex Snap-In/Snap-In 3838ASP 3/8" Duplex Snap-In/Snap-In, Insulated SG38SP 3/8" 1-Screw Clamp Type SG38ASP 3/8" 1-Screw Clamp Type, Insulated SG38MCIA 3/8" 1-Screw Clamp Type, Insulated SG3838ASP 3/8" Duplex 2-Strap Clamp Type, Insulated SG50SP 1/2" 1-Screw Clamp Type SG50ASP 1/2" 1-Screw Clamp Type, Insulated 8400SP 3/8" 2-Screw Clamp Type 8400MCIA 3/8" 2-Screw Clamp Type, Insulated 845SP 3/8" 1-Side Screw Snap-In 845ASP 3/8" 1-Side Screw Snap-In, Insulated 846SP 3/8" Duplex 1-Screw Clamp Type 802MCIA 3/8" 90 Degree 1-Screw AMC-50 3/8" Steel 1-Screw Clamp Type AMC-50MCIA 3/8" Steel 1-Screw Clamp Type AMC-5075 1/2" Steel 1-Screw Clamp Type AMC-52 3/8" Steel Duplex 1-Screw Clamp Type BL16SP 3/8" Saddle Type Connector BL16ASP 3/8" Saddle Type Connector, Insulated BL16MCIA 3/8" Saddle Type Connector, Insulated 234 Technical Guide MCI-A Cable 14/4 (.43"Ø min), 12/2, 12/3, 10/3, 10/4 (.61"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3, 10/4 (.61"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3, 10/4 (.59"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3, 10/4 (.59"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3 (.53"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3 (.53"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/4, 10/2, 10/3 (.53"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 10/3, 10/4 (.61"Ø max) 12/4, 10/2, 12/4, 10/2, 12/4, 10/2, 12/4, 10/2, 12/4, 10/2, 12/4, 10/2, 12/2, 12/3, 12/4, 10/2, HCF MCI-A Cable 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.59"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.59"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.38"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 6/3, 8/2, 8/3 6/3, 8/2, 8/3 6/3, 8/2, 8/3 6/3, 8/2, 8/3 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4, (.59"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4, (.59"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4,12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4, (.59"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4, (.59"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/310/2, 10/3 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 6/2, 6/3, 8/2, 8/3 6/2,6/3,8/2,8/3 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max)) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max)) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max)) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max)) 235 Technical Guide APPENDIX X (continued) Locknut Style: Cat. No. Description 560-DC2 3/8" 1-Screw Clamp Type 560-DCI2 3/8" 1-Screw Clamp Type, Insulated 560-MCIA2 3/8" 1-Screw Clamp Type, Insulated 565-DC2 3/8" 2-Screw Clamp Type 566-DC2 3/8" 2-Screw Clamp Type 570-DC2 3/8" 1-Screw Clamp Type 570-DCI2 3/8" 1-Screw Clamp Type, Insulated 570-DCR2 3/8" 1-Screw Clamp Type, Round End 571-DC2 1/2" 1-Screw Clamp Type 571-DCI2 1/2" 1-Screw Clamp Type, Insulated 571-S 1/2" Steel 1-Screw Clamp Type 571-SI 1/2" Steel 1-Screw Clamp Type, Insulated 601-DC2 3/8" Duplex 1-Screw Clamp Type 691-DC2 3/8" Duplex 2-Screw Clamp Type 802-MCIA2 3/8" 90 Degree 1-Screw BL-17 1/2" 1-Screw Strap Type BL-17I 1/2" 1-Screw Strap Type, Insulated Southwire is a registered trademark of Southwire Company 236 Technical Guide MCI-A Cable HCF MCI-A Cable 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 14/4 (.43"Ø min), 12/2, 12/3, 12/4, 10/2, 10/3 (.53"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2 (.53"Ø max) 6/3 or 8/3 only 6/3 or 8/3 only 6/2, 6/3, 8/2, 8/3 6/2, 6/3, 8/2, 8/3 6/3 or 8/3 only 6/3 or 8/3 only 6/2, 6/3, 8/2, 8/3 6/2, 6/3, 8/2, 8/3 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 12/2 (.43"Ø min), 12/3, 12/4, 10/2, 10/3, 10/4 (.61"Ø max) 14/2 (.38"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3 12/2 (.43"Ø min), 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3 8/3 only 8/3 only 8/3 only 8/3 only 237 Installation FAQ’s The following FAQ’S are not an interpretation of the National Electrical Code (NEC) or local regulations. Always consult your local electrical inspector for specific requirements in your area. Why Can’t Plastic Insulating Bushings Be Used To Connect A Conduit To An Enclosure? Plastic insulating bushings must be used in conjunction with two locknuts when connecting threaded rigid or IMC conduit, containing #4 or larger un-grounded conductors, to boxes or enclosures. Bushings composed entirely of plastic cannot be used to secure conduit to the enclosure. A locknut is required on the inside and outside of the enclosure in addition to the plastic insulating bushing. Temperature rating of the plastic insulating bushing must not be less than the insulation rating of the conductors. What Is The Proper Method For Securing AC and MC Cables? NEC Articles 333.7 and 334.10(A) denotes the different requirements for securing Armored and Metal Clad cables. Although similar in appearance, each cable has unique requirements. Armored cable [NEC Article 333.7] must be secured at intervals not exceeding 4-1/2 feet and within 12” of box or fitting. Metal Clad cable [NEC Article 334.10(A)] must be secured at least every 6 feet. Cables with four or fewer conductors must be secured within 12” of box or fitting. 238 Installation FAQ’s Why Use Steel Safety Plates? NEC Article 300.4(E) specifies that cable or raceway-type wiring may be installed in wooden stud grooves, to be covered by wallboard or similar covering, if protected by 1/16” thick steel plate. This requirement excludes raceways covered by NEC Articles 345, 346, 347, and 348. The steel plate must have the same width as the stud, and must be securely fastened to the stud. Why Do “Concrete-Tight” Listed Fittings Need Tape? Raceway systems such as EMT and rigid conduit are permitted by most codes to be embedded in concrete. The solid exterior of these conduits eliminates the possibility of concrete entrance, however, the termination with the connector or coupling can be susceptible to concrete entering the raceway. The UL 514B testing procedure requires the connector or coupling to be assembled to the conduit inside a special concrete form. Then Portland-type concrete is poured into the form and over test samples. Then the concrete slurry is vibrated to remove any trapped air, and allowed to cure. After concrete curing, the fittings are chipped out of the concrete and examined for concrete penetration. Although compression style connectors and couplings pass these tests in all trade sizes because of the gland ring design, the set screw types may have difficulty conforming to UL or CSA concrete penetration requirements. When the set screw is tightened onto the conduit, the fitting and/or conduit material will “yield”, or stretch, enough to create an opening at the conduit/fitting connection. 239 Installation FAQ’s Set screw fittings in the smaller (1/2”, 3/4”, and 1”) trade sizes are less likely to stretch to the point that would permit entrance of concrete. However, 1-1/4” and larger size fittings will yield enough so that concrete can enter the raceway. UL and CSA will accept product carton marking that specify “Concrete-Tight When Taped” on fittings that cannot pass testing, since the tape prevents entrance of concrete into the raceway. The taped joint must completely encircle the conduit/ fitting connection. We recommend using duct tape or similar type of durable tape. Is There an NEC Exception For Use Of NM Cable In Solid Conduit? There is an exception to NEC Article 373.5(C) which permits single entry of multiple nonmetallic sheath cables into surface mounted panel board when the cables are protected by solid conduit or tubing. A solid raceway, such as EMT, between 18 and 120 inches in length may enclose multiple nonmetallic sheath cables into the top of a surface mounted panel. This raceway must extend directly above the panel and must not penetrate any structural ceiling. Additionally, this exception requires the raceway end that the cables enter be plugged to prevent entrance of foreign material, and cable fill requirements of Chapter 9 must be met. What Are The NEC Requirements For Use Of an Anti-Short Bushing? When installing ARMORED CABLE (Type AC), NEC Article 333.9 mandates the use of a insulating bushing (commonly referred to as Anti-Short or Redhead) between the metal sheath and the conductors. Fittings with insulated throats are not a substitute for the anti-short bushing. 240 Installation FAQ’s When installing METAL-CLAD CABLE (Type MC), the NEC does not require the use of a Anti-Short insulating bushing. MC Cable conductors are usually wrapped with Mylar tape for protection; use of antishort bushing is optional unless specified otherwise by the cable manufacturer. Can Liquid Tight Connectors Be Used For Class 1, Div 2 Locations? NEC Article 501.16(B), exception ‘a’, will permit the use of liquidtight flexible metal conduit and liquidtight connectors to be the sole equipment grounding conductor in Class 1, Division 2 locations. However, strict requirements must be met: • Conduit and connectors must be UL listed. • Conduit cannot exceed 6 feet in length. • Over-current protection in the circuit is limited to 10 amperes or less. • It supplies other than power utilization loads. Can Beam Clamps Be UL Listed? In 1998, UL began listing electrical hardware devices such as Beam Clamps. This was at the request of the electrical industry, including contractors, who became confused regarding the correct application and strength of Beam Clamps. UL listed Beam Clamps are manufactured from malleable iron or steel with a hardened screw to secure the clamp to the beam. Clamps are tapped in two places for attachment of threaded rod, conduit hanger, or bridle ring. 241 Installation FAQ’s UL listed beam clamps are only for use with rigid, IMC, or EMT conduits. Spacing of clamps must comply with strap requirements found in the National Electrical Code. Refer to Bridgeport’s carton label for conduit size and type, maximum loading, screw torque, or any special assembly requirements. What Is The Difference Between Metal Clad and Armored Cable Connectors? NEC Article 300.15 specifies that fittings can only be used with wiring methods for which they are designed and listed. Most manufacturers have received dual usage listings for these types of connectors; however, you should not assume all fittings have the dual listing. While the appearance of Metal Clad (MC) and Armored Cable (AC) connectors may be similar, the misuse of an AC cable connector can be significant enough to cause an unsafe installation with metal clad cable. During the listing process at Underwriters Laboratories (UL), MC connectors are subjected to more stringent testing than a typical AC connector. Additional tests are necessary to comply with application requirements of metal clad cable in the NEC. UL listed metal clad cable connectors are suitable for grounding when installed in accordance with the NEC. ‘Dry Type’ MC connectors may be ‘concrete tight’ when taped and used with PVC coated metal clad cable (PVC jacket stripped back to fitting end stop). Never use a direct bearing set screw type MC connector with aluminum sheath metal clad cable; the fitting is not designed for this purpose and the screw will pierce the sheath possibly causing a short. 242 Installation FAQ’s Always refer to the carton label for listed cable type (corrugated, interlocked, or smooth) and material (aluminum or steel). The label will also specify the cable size range. Do not use cable smaller than noted on label; the clamping mechanism on the fitting will not function correctly and grounding integrity will be compromised. The newest type of MC Cable - MCAP, may require use of a special connector. Such fittings have been listed by UL for use with this cable type. Can Conduit Bodies Contain Splices? Although different manufacturers’ conduit bodies may look the same, not all are suitable for ‘approved’ installations. Specific NEC requirements determine which conduit bodies may contain splices, taps, or devices. Conduit bodies provide access to the conduit system through a removable cover at a junction of two or more entries. Bodies may be used for changing the direction of the wiring systems, to aid in pulling of long wire runs, or to mount devices or make splices. UL can ‘list’ conduit bodies as a fitting, which is tested under specification UL 514B. However, a fitting cannot contain a device or splice. UL can also ‘list’ the conduit body as a box, tested under specification UL 514A. Only the conduit body listed as a box is suitable for use with a device, splices, or taps. 243 Installation FAQ’s Conduit bodies listed for use with splices, taps, or devices must be marked with the cubic inch volume and any special installation requirements, such as the use of wire pulling compound. The conduit body may also be marked with the maximum wire capacity if the body does not meet the NEC end stop to end stop dimensional requirement for wire pulling: 8 times the trade size for straight pulls, 6 times the trade size for angled pulls. Are Snap-in Type Metal Clad And Armored Cable Fittings Suitable For Grounding? AC and MC snap-in type connectors are capable of withstanding ground fault currents likely to be imposed on them, and offer equivalent grounding protection as locknut type connectors. During the listing process at UL, AC and MC connectors are assembled to cable and subjected to a ground fault current test. These tests are necessary to comply with application requirements in the NEC. Are Snap-in Type Fittings Tested To The Same Requirements As Locknut Type Fittings? UL listing requirements are identical for both snap-in and locknut types of fittings. This includes assembly, bending, resistance, pull test, repeated resistance, and a ground fault current test. Snap-in type connectors are required by code to be capable of withstanding ground fault current likely to be imposed on them, and offer equivalent grounding protection as locknut type connectors. Many snap-in products are used to reduce installation time or where tightening a locknut may be difficult. 244 Installation FAQ’s UL listed armored and metal clad cable connectors are suitable for grounding when installed in accordance with the NEC. Always refer to the carton label for listed cable type and material (aluminum or steel). The label will also specify the cable size range. Do not use cable smaller than noted on label, the clamping mechanism on the fitting may not function correctly and grounding integrity will be compromised. Bridgeport’s snap-in fittings are designed only to work with UL listed steel boxes which have a nominal .063” wall thickness. Use with boxes made in other materials (i.e. plastic) or other thicknesses, is not recommended nor approved. Are All Clamp-Type Connectors Suitable For Use With Multiple Nonmetallic Sheath Cables? UL listed nonmetallic (NM) sheath cable connectors are suitable for use with a single cable unless specifically tested for two cable usage. A concern with two cable usage is the fitting’s ability to withstand cable pullout forces normally encountered during installation. Per UL 514B, each cable is subjected to an individual pull test. In addition, UL tests strap type connectors to ensure that when tightening the strap screws, the strap will not pierce the nonmetallic sheath of the cable, creating a possible short. Bridgeport’s Carton shipping labels will specify the type and number of nonmetallic cables for which the fitting has been UL listed. Do not exceed the UL rating. 245 Installation FAQ’s Are Compression Raintight Fittings Really Rain-Tight? In 2002, UL received field complaints that listed EMT compression split ring type rain-tight fittings were permitting the entrance of water into the conduit system. After checking the validity of these claims, UL made the decision to de-list ALL fitting manufacturers’ compression type raintight connectors and couplings. A revised test method was employed by UL to represent actual field applications and conditions. Bridgeport was the first to develop and release an updated version of connector that met this revised requirement. Other fitting manufacturers followed suit, with different configurations to pass the UL test requirement. Some of these designs include internal plastic sealing devices, or compression gland rings without a split, and external sealing device on the locknut threads to prevent water entering the box. Regardless of the design, all have to pass the same UL raintight test parameters. 246 Installation FAQ’s Is A Ground Clamp UL Listed To Be Used To Bond Flexible Or Non-Metallic Gas Piping? 2005 NEC, Article 250.52(B) (1) states “(B) Electrodes Not Permitted for Grounding - (1) Metal underground gas piping system”. Gas piping by itself cannot be used for Grounding. However, NEC Article 250.104, (B) Other Metal Piping “The equipment grounding conductor for the circuit that is likely to energize the piping systems shall be permitted to serve as the bonding means.” Gas piping may be bonded only if it’s likely to be possibly energized by the equipment it is connected to. Most of the time, the piping will be bonded to the system automatically due to its metal fittings. However, in the case of nonmetallic or flexible gas piping, a bonding jumper may need to be provided to complete the bonding path around the non-metallic or flexible sections. There is an important difference worth noting. Grounding is not the same as Bonding. They are considered separate requirements by the NEC. Gas piping cannot be used for grounding, but it can be bonded if necessary. Flexible gas pipe system manufacturers will specify the method and system of bonding. In most cases, the clamp is placed on the metal hex fitting rather than over the flexible metal or non metallic tube. As an example, the following is an excerpt from Gastite’s® CSST Installation Guide: “The piping is permanently and directly connected to the electrical service equipment enclosure, the grounded conductor at the electrical service, the grounding electrode conductor (where of sufficient size) or to one or more of the grounding electrodes used. A single bond shall be made at or near the service entrance of the structure or the gas meter of each individual housing unit within a multi-family 247 Installation FAQ’s structure. The bonding conductor shall be 6 AWG copper wire. Bonding jumpers shall be attached in an approved manner in accordance with NEC-2005 Article 250.70 and the point of attachment for the bonding jumper shall be accessible. Bonding/grounding clamps listed to UL 467 comply with this requirement. This bond is in addition to any other bonding requirements as specified by local codes.” Bridgeport’s ground clamps are not UL listed individually to be used in a gas pipe bonding application - only to the basic standalone UL specification (UL 467). What Connector Should I use for Health Care Facilities? There are two armored Health Care Facility (HFC) cables recognized by Underwriters Laboratories: Type AC and Type MCI-A available in Steel or Aluminum interlocked armor. Bridgeport’s 38ASP connectors are UL Listed for use with both types AC and MCI-A (HCF) cables. In regards to other Bridgeport’s fittings please reference our web site at www.bptfittings.com for specific product specifications. Keep in mind that while many of our Whipper-Snap and Locknut styles connectors are suitable for MCI-A cable some are not. 248 Installation FAQ’s When a green identification is required or specified, Bridgeport’s type 570-GI can be used to provide confirmation that the right cable has been terminated. Bridgeport’s connectors are UL Listed under UL file number E-20534. The listing is proof of the products performance as an effective ground-fault current path, and can be confirmed via the (UL) website www.UL.com. 249 BIG FITTINGS. BIG PERFORMANCE. 1" to 3 1/2" trade sizes Deep slot, tri-drive screws minimize driver slippage and save installation time Heavy die cast zinc straps, serrated locknuts and built-in end-stops ensures continuity from cable to enclosure Optional heatstabilized nylon insulated throat prevents conductor damage Size doesn’t matter – we’ve got them all. When the challenge is connecting large MC cable to boxes, enclosures, load centers or switchgear, the solution is Bridgeport. We’ve got the cable fittings you need to deliver a robust mechanical connection for industrial, commercial, institutional and multi-family residential projects. Choose the fittings with the big performance advantage. Choose Bridgeport. www.bptfittings.com THINK AMERICAN. THINK BRIDGEPORT. THINK ZINC. Meets or exceeds same standards as steel. UL514B Federal Specifications: A-A-50552 A-A-50553 A-A-50563 NEMA FB-1 NEC Application Requirements A LOWER TOTAL COST EMT FITTINGS SOLUTION: ZINC AS THE ALTERNATIVE TO U.S. EMT STEEL If project cost is your main concern, turn to U.S. made Zinc EMT fittings from Bridgeport. The industry’s best EMT fittings now provide you with a lower total cost solution for Made in the USA projects – with a purchase price point significantly below U.S. made steel EMT fittings, and the legendary quality that ensures a trouble-free installation every time. Choose Bridgeport U.S. Zinc for savings over U.S. EMT steel fittings. www.bptfittings.com BUY AMERICAN. BUY BRIDGEPORT. Stimulus from Bridgeport. When you think American, think Bridgeport. We’re investing in our U.S.-based manufacturing operation in Stratford, Connecticut. We’re investing in equipment, improving process automation and developing new products – all in the U.S. And still today, nearly three-quarters of our product volume is manufactured in the U.S. Find the American-made products for your projects at: www.bptfittings.com/american Bridgeport Fittings, Inc. 705 Lordship Blvd. Stratford, CT 06615-7313 Voice: 203.377.5944 Fax: 203.381.3488 E-mail: sales@bptfittings.com www.bptfittings.com paper. Pri ed t-consume os © 2010 Bridgeport Fittings, Inc. All rights reserved. on 1 0 % ed p nt aste recycl lit XX% Cert no. XX-XXX-XXXXX rw ho gr fp aph o ic s Bridgeport products are distributed by: 10/07 50000 99701
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Create Date : 2010:08:03 12:15:29Z Creator Tool : QuarkXPress(R) 7.31 Modify Date : 2010:08:03 12:43:26-04:00 Metadata Date : 2010:08:03 12:43:26-04:00 Producer : QuarkXPress(R) 7.31 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Format : application/pdf Title : Layout 1 Document ID : uuid:41d28647-0da6-4534-b8f4-912c33667501 Instance ID : uuid:e7007e27-f228-4573-9f43-5f0902c7d3a2 Has XFA : No Page Count : 296 Creator : QuarkXPress(R) 7.31EXIF Metadata provided by EXIF.tools