369662 HomeWorks QS Wire Landing Board Spec Sheet 122645 Catalog
2014-10-23
: Pdf 122645-Catalog 122645-Catalog Batch9 unilog
Open the PDF directly: View PDF .
Page Count: 3
Lutron® | 1www.lutron.com
product specifications 08.27.12
369-662a
QS Wire Landing Board
The wire landing board is a wiring aid consisting
of a printed circuit board with one set of five
terminal blocks. Each terminal block can accept
up to two 18 AWG (1.0 mm2) wires and is
connected pin-to-pin, to simplify wiring.
The wire landing board can be installed in a
low-voltage enclosure or at the bottom of a
feed-through panel.
Model Number
QS-WLB QS Wire Landing Board
QS-WLB
2 | Lutron®
Technical Support: U.S.A. 800.523.9466
Europe +44.(0)20.7680.4481
product specifications 08.27.12
369-662a
QS Wire Landing Board
Specifications
Model Number QS-WLB
Low-Voltage Connections One set of five terminal blocks. Each terminal block has 5terminals
that will each accept up to two 18 AWG (1.0mm2) wires.
Environment Ambient operating temperature: 32 to104°F(0to40°C). Ambient
operating humidity: 0-90% humidity, non-condensing. Indoor use
only.
Mounting Mounts in the following enclosures: L-LV14-120, L-LV14-230,
L-LV21-230, HQ-LV21-120, and HWI-PNL-8
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf
www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf
Dimensions
Dimensions shown as: in (mm)
4.036
(102.5)
1.45 (36.8)
Lutron® | 3www.lutron.com
product specifications 08.27.12
369-662a
QS Wire Landing Board
Configuration Example
GRAFIK Eye®
QS control
unit
QS Contact
Closure Interface
HomeWorks® QS
Keypad
Sivoia® QS
Shade / Drapery
Keypad(s)
DMX
•Tightenterminalblocksto3.5to5in-lb(0.4to0.57N•m).Donotovertighten.
•Terminal5isusedtoconnecttheQScableshielddrainwirethroughoutthesystem.