298297 Catalog
2014-05-16
: Pdf 298297-Catalog 298297-Catalog 786776 Batch3 unilog
Open the PDF directly: View PDF 
.
Page Count: 60
www.crenlo.com/enclosures | 507-287-3535
We see enclosures differently.™
© 2011 Crenlo Cab Products, Inc. All Rights Reserved. Crenlo® and the Crenlo® Logo are registered trademarks in the
United States [and various other countries] of Crenlo Cab Products, Inc.
© 2011 Emcor Enclosures, Inc. All Rights Reserved. Emcor®, 10 Series®, and isoNet® are registered trademarks in the
United States [and various other countries] of Emcor Enclosures, Inc.
As an industry leader in the design, manufacture and integration of
high-quality enclosures, Emcor offers a range of standard and
custom products for virtually any application. The only thing
stronger than our enclosures is our commitment to customer
satisfaction. At Emcor, we see enclosures differently.
Emcor enclosures are designed and manufactured by Crenlo.
5-20 ESQ
21-36 10 Series
37-52 Accessories
Table of Contents
Console and Enclosure Product Line
Console & Enclosure Product Line
Accessories that fit all Product Lines
About Crenlo:
Crenlo is a leading manufacturer within the industries it serves under its two respective businesses: Crenlo cab and roll-over pro-
tective structures (ROPS) and Emcor enclosures.
Crenlo’s cab business serves top OEM construction, agriculture and commercial equipment manufacturers with over 55 years
experience as the leading North American manufacturer of operator cabs and ROPS. Under Crenlo’s Emcor enclosure business,
top companies in the technology, aerospace, data communications, test and measurement and defense industries put trust in the
Emcor brand to meet exacting standards with high-quality dependable solutions for protecting electronic equipment with enclo-
sures, consoles and custom solutions. Since its founding, Crenlo has been committed to its customers, striving to provide "best
in class" product design, tooling services and manufacturing engineering excellence.
Crenlo’s Objective Is To:
Define our customers’ quality requirements and to produce products and services that meet or exceed those expectations.
Crenlo is committed to improvement through education, process advancements, and problem prevention.
2www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
We see enclosures differently.™
Corporate Sales Office & Show Room
3
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Fully Welded
Light Duty Construction
Fully Welded
Heavy Duty Construction
Corner Detail Corner Detail
10 Series Product LineESQ Product Line
Here is how it works:
Choose what you need from a selection of our best selling product lines.
We will paint it the color* you want, and then we will assemble it for you.
The best part is that it ships in just 3 days.
Instant Emcor is the most flexible quick ship program in the industry.
*Choose from one of Emcor’s nine proprietary colors.
4www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
We see enclosures differently.™
SELECT A FRAME STYLE AND PART NUMBER
Because the basic building block is the frame it will be your first selection.
REVIEW THE EASY ORDERING GUIDE
Once you have selected a frame part number, locate it in the ordering guide. Note that the
ordering guide is organized so that compatible accessories are listed to the right of the frame
part numbers. If you cannot find the item desired, contact your area Emcor representative or
the Emcor factory sales office.
When you are ready to write your order, refer to the sample order entry form and information
listed on the following page. Use this guide to assure all the necessary information is provided
so that your order may be processed without delay.
ORDER YOUR ENCLOSURE
Now that your order is written, you can place it by either emailing, calling, faxing, or mailing,
your order to the Emcor sales office or your area Emcor representative. Formal confirming
purchase order paperwork is requested for all orders.
Issue Orders To
All correspondence and Purchase Orders should be addressed to:
Crenlo | Emcor
1600 4th Avenue N.W.
Rochester, MN 55901
OR ADDRESS TO:
Crenlo | Emcor
In care of your area representative
Terms of Sale
$150.00 minimum order.
F.O.B. our plant, Rochester, Minnesota
Net 30 days from date of invoice - with approved credit.
How to Use this Catalog
Since Emcor uses a modular approach to all of its enclosure systems, each component of the enclosure is ordered
separately. This process allows for a vast number of choices in the final appearance and function of the enclosure
or console. Simply follow the steps listed below to develop the product that fulfills your requirements.
1
2
3
5
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Order Entry Form
The sample below contains the information needed to efficiently process your order.
Note
New customers may be required to provide credit references.
Contact the factory, or your local representative, for specific details.
6www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
We see enclosures differently.™
Note
The dimensional drawings that are shown on the following pages are for your reference only and depict the dimensions that are
normally required in specifying and ordering enclosures. Detailed engineering drawings are available on request.
What contributes to Emcor’s high quality design and construction?
MATERIALS:
The highest quality steel, in 16, 14, and 11 gauge material, is used in the fabrication
of all Emcor enclosures.
FASTENING:
Emcor utilizes captive clip nuts and hardened Phillips head machine screws for
fastening panels and other equipment. This method produces superior fastening
strength and allows for quick and easy assembly.
WELDING:
All frames are constructed using electronically controlled resistance welders to
insure uniform strong welds. Emcor welds are constructed using a gas metal arc
welding process for the highest attainable weld quality.
FINISHING:
Emcor offers nine(9) paint colors to choose from in a powder paint finish. Two over-
head conveyor paint lines are designed for parts 84”l x 42”w x 53”h. Additionally, we
have a floor based system that is capable of handing items up to 8’l x 7’w x 8’h. Our
modern paint laboratory allows us to perform a full range of physical testing such as
salt spray, humidity, and hardness. In addition, cosmetic testing, such as film thick-
ness, gloss, and color differences are monitored.
If you require a custom paint color, we will match your paint chip or any Federal
Standard 595 color with the assistance of our digital color computer to guarantee
you a consistent color match every time. Contact the factory for pricing and details.
QUALITY CONTROL:
As an ISO 9001:2000 company, Crenlo ensures conformance to high quality manu-
facturing standards in all elements of the fabrication process. Manufacturing
process controls are utilized from the moment raw material is received and continue
through final product assembly and inspection. Dimensional accuracy is statistically
audited and verified throughout the cycle with the aid of three sate-of-the-art coordi-
nated measuring machines.
RoHS COMPLIANCY
Crenlo can verify RoHS compliance upon request.
ISO 9001:2000 Certified
7
© 2008 Emcor Enclosures. Data subject to change without notice.
ESQ
ESQ Product Line
VerticalFrames.........................6-7
Part Numbers & Dimensions
OrderingGuide ........................8-11
Parts ...............................12-20
Mounting Angles
Side Panels
Doors
Top Options
Equipment Support Options
Grounding Option
Universal Accessories . . . . . . . . . . . . . . . . . 37-52
Paint Options
Closure Panels
Wire Management
Power Options
Fan and Blower Options
Casters
Levelers
Hardware
Overview
The ESQ Enclosure System is your choice for applications requiring a
clean contemporary appearance and an efficient means for housing your
electronic equipment. ESQ enclosures provide the benefits of economy,
style and quality.
Features & Benefits
Modular
Fully welded construction
Static Load capacity of 800 pounds
14 gauge and 16 gauge material
Available in 19” panel widths
12U to 45U vertical panel openings (VPO)
Overall depth options of 25 1/2” and 30 3/4”
Adjustable mounting angles with rack unit markings
•
•
•
•
•
•
•
•
8www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Frames
Frames
We see enclosures differently.™
ESQ
Frames
The highest quality cold rolled steel is used in the fabrication of all ESQ frames. Crossties, frame channels, and pontoon bases
are made of 14-gauge steel; adjustable mounting angles are made of 11-gauge steel; other frame parts are made of 16-gauge
steel. ESQ frames are fully welded and can handle 800 lbs. of equipment evenly distributed in the frame.
All ESQ Frames Include:
Hardware kit
Pontoon base
2 pair adjustable EIA pattern thru hole panel mounting angles on the front and rear openings
Fixed mounting angles are placed in the top openings of all frames.
Note
Panel Mounting Angles - Tapped (threaded) mounting angles are available. The tapped mounting angles will be mounted in the
position from which you deleted the non-tapped mounting angles, unless otherwise stated.
19" Wide CA A1 B B1 Struts
ICSFR-105A 21.063 25.500 21.062 12U 29.500 21.063 12U 2
ICSFR-115A 21.063 25.500 21.062 12U 36.500 28.063 16U 3
ICSFR-725A 21.063 30.750 26.312 15U 59.625 52.625 30U 3
ICSFR-726A 21.063 30.750 26.312 15U 68.375 61.375 35U 4
ICSFR-727A 21.063 30.750 26.312 15U 77.125 70.125 40U 4
ICSFR-728A 21.063 30.750 26.312 15U 85.875 78.875 45U 4
Vertical Frame Part Numbers & Dimensions
ESQ CA WFE J PNQR
25" Deep 25.500 24.010 24.250 22.836 22.286
30" Deep 30.750 29.260 29.500 28.086 27.536
19" Wide 21.063 19.062 18.310 17.760 19.484
Section View Dimensions
9
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax) Frames
Frames
ESQ
Vertical Frames
Side View Front View
Top View
Section Views
Section View Front View
19” Wide Frames Side Panel Options
10 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Ordering Guide
19” Wide Frames Mounting Angle Options
We see enclosures differently.™
ESQ
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
Side Panels [13]
Formed Inside Removable - Solid Formed Inside Removable - Louvered
Left Right Left Right
ICSSP-105A ICSSP-105A ICSSP-105A-LV ICSSP-105A-LV
ICSSP-115A ICSSP-115A ICSSP-115A-LV ICSSP-115A-LV
ICSSP-725A ICSSP-725A ICSSP-725A-LV ICSSP-725A-LV
ICSSP-726A ICSSP-726A ICSSP-726A-LV ICSSP-726A-LV
ICSSP-727A ICSSP-727A ICSSP-727A-LV ICSSP-727A-LV
ICSSP-728A ICSSP-728A ICSSP-728A-LV ICSSP-728A-LV
Panel Mounting Angles [12] Mounting Straps [12]
Thru-Hole Tapped 1 Face Thru-Hole
Front (pr) Rear (pr) Front (pr) Rear (pr) Front (pr) Rear (pr)
Supplied with frame
PMA-21A PMA-21A PMA-21A-1032-1 PMA-21A-1032-1 MS-21 MS-21
PMA-28A PMA-28A PMA-28A-1032-1 PMA-28A-1032-1 MS-28 MS-28
PMA-52A PMA-52A PMA-52A-1032-1 PMA-52A-1032-1 MS-52 MS-52
PMA-61A PMA-61A PMA-61A-1032-1 PMA-61A-1032-1 MS-61 MS-61
PMA-70A PMA-70A PMA-70A-1032-1 PMA-70A-1032-1 MS-70 MS-70
PMA-78A PMA-78A PMA-78A-1032-1 PMA-78A-1032-1 MS-78 MS-78
11
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax). Ordering Guide
ESQ
19” Wide Frames Top Options
Top Panels [39] Single Fan Panels [16]
Solid Perforated Louvered Aluminum
CXPN-2119 CXPN-2119-PA CXPN-2119-LV CXPN-2119-A CXPN-2119-FP
CXPN-2119 CXPN-2119-PA CXPN-2119-LV CXPN-2119-A CXPN-2119-FP
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A CXPN-2619-FP
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A CXPN-2619-FP
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A CXPN-2619-FP
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A CXPN-2619-FP
19” Wide Frames Bottom Options
Bottom Panels [39]
Solid Perforated Louvered Aluminum
CXPN-2119 CXPN-2119-PA CXPN-2119-LV CXPN-2119-A
CXPN-2119 CXPN-2119-PA CXPN-2119-LV CXPN-2119-A
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A
CXPN-2619 CXPN-2619-PA CXPN-2619-LV N/A
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
12 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Ordering Guide
We see enclosures differently.™
ESQ
19” Wide Frames Flush Door Options
Flush Doors [14]
Flush Door
Front Rear
(1) Block Indicate:
H- Handle with Lock
(2) Block Indicate:
S- Solid
V- Vented
(3) Block Indicate:
R- Right Hinge
L- Left Hinge
(1) Block Indicate:
H- Handle with Lock
(2) Block Indicate:
S- Solid
V- Vented
(3) Block Indicate:
R- Right Hinge
L- Left Hinge
ICDF-(1)(2)(3)-2119 ICDF-(1)(2)(3)-2119
ICDF-(1)(2)(3)-2819 ICDF-(1)(2)(3)-2819
ICDF-(1)(2)(3)-5219 ICDF-(1)(2)(3)-5219
ICDF-(1)(2)(3)-6119 ICDF-(1)(2)(3)-6119
ICDF-(1)(2)(3)-7019 ICDF-(1)(2)(3)-7019
ICDF-(1)(2)(3)-7819 ICDF-(1)(2)(3)-7819
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
19” Wide Frames Surface Door Options
Surface Doors [15]
Surface Door
Front Rear
(1) Block Indicate:
S- Solid
V- Vented
(2) Block Indicate:
R- Right Hinge
L- Left Hinge
ICDS-E(1)(2)-2119 ICDS-E(1)(2)-2119
ICDS-E(1)(2)-2819 ICDS-E(1)(2)-2819
ICDS-E(1)(2)-5219 ICDS-E(1)(2)-5219
ICDS-E(1)(2)-6119 ICDS-E(1)(2)-6119
ICDS-E(1)(2)-7019 ICDS-E(1)(2)-7019
ICDS-E(1)(2)-7819 ICDS-E(1)(2)-7819
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
13
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax). Ordering Guide
ESQ
19” Wide Frames Equipment Support Options
Chassis Guides [17] Fixed Equipment Shelves [17] Monitor Shelves [18] Pull Out Shelves [17] Retractable Keyboard Trays [18]
Solid Perforated Solid Perforated Solid Tray Hinged Access Panel
CCGS-25A CSH-25A CSH-25A-PA CSH-1619 CSH-1619-PA CCSXQ-25 CRKT-0319-S CKTAP-0319
CCGS-25A CSH-25A CSH-25A-PA CSH-1619 CSH-1619-PA CCSXQ-25 CRKT-0319-S CKTAP-0319
CCGS-31A CSH-31A CSH-31A-PA CSH-1619 CSH-1619-PA CCSXQ-31 CRKT-0319-S CKTAP-0319
CCGS-31A CSH-31A CSH-31A-PA CSH-1619 CSH-1619-PA CCSXQ-31 CRKT-0319-S CKTAP-0319
CCGS-31A CSH-31A CSH-31A-PA CSH-1619 CSH-1619-PA CCSXQ-31 CRKT-0319-S CKTAP-0319
CCGS-31A CSH-31A CSH-31A-PA CSH-1619 CSH-1619-PA CCSXQ-31 CRKT-0319-S CKTAP-0319
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
19” Wide Frames Power Options
Frame
Vertical
ICSFR-105A
ICSFR-115A
ICSFR-725A
ICSFR-726A
ICSFR-727A
ICSFR-728A
Power Strips [43] Power Panels [44]
15 Amp Direct Wire 15 Amp Power Cord 20 Amp Power Cord 15 Amp Power Cord 20 Amp Power Cord
18" (6 outlets) 48" (10 outlets) 18" (6 outlets) 48" (10 outlets) 18" (6 outlets) 48" (10 outlets) (6 outlets) (6 outlets)
WM-180615-DW N/A WM-180615-PC N/A WM-180620-PC N/A PDU-615R-PC PDU-620R-PC
WM-180615-DW N/A WM-180615-PC N/A WM-180620-PC N/A PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
14 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Mounting Angles & Mounting Straps
We see enclosures differently.™
ESQ
Mounting Angles
All ESQ frames include 2 pair (4 total) thru-hole EIA compliant mounting angles constructed of 11-gauge steel. Optional tapped
mounting angles are available. The tapped mounting angles have .281" diameter thru-holes on one leg of the mounting angle,
and .159" diameter tapped holes (10-32 NF2) on the other leg. All mounting angles and straps are processed to specification
ASTM-B633 which calls for electrodeposited zinc plating with a clear chromate conversion coating.
Thru Hole Tapped 1 B
PMA-19A PMA-19A-1032-1 19.250 11U
PMA-21A PMA-21A-1032-1 21.000 12U
PMA-24A PMA-24A-1032-1 24.500 14U
PMA-28A PMA-28A-1032-1 28.000 16U
PMA-35A PMA-35A-1032-1 35.000 20U
PMA-40A N/A 40.250 23U
PMA-42A N/A 42.000 24U
PMA-43A PMA-43A-1032-1 43.750 25U
PMA-45A N/A 45.500 26U
PMA-49A N/A 49.000 28U
PMA-52A PMA-52A-1032-1 52.500 30U
PMA-61A PMA-61A-1032-1 61.250 35U
PMA-70A PMA-70A-1032-1 70.000 40U
PMA-78A PMA-78A-1032-1 78.750 45U
Thru-Hole B
MS-19 19.250 11U
MS-21 21.000 12U
MS-24 24.500 14U
MS-28 28.000 16U
MS-42 42.000 24U
MS-43 43.750 25U
MS-52 52.500 30U
MS-61 61.250 35U
MS-70 70.000 40U
MS-78 78.750 45U
Mounting Strap Part Numbers & DimensionsMounting Angle Part Numbers & Dimensions
Mounting Straps
For intermediate depth mounting needs,
ESQ mounting straps constructed of
11-gauge steel provide users with optimal
flexibility and utility.
Straps
Tapped 1 Face
Thru-Hole
15
Parts
Side Panels
ESQ
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Formed
Inside Removable
Solid
Formed
Inside Removable
Louvered
B A
ICSSP-105A ICSSP-105A-LV 26.375 25.250
ICSSP-115A ICSSP-115A-LV 33.375 25.250
ICSSP-725A ICSSP-725A-LV 56.437 30.375
ICSSP-726A ICSSP-726A-LV 65.187 30.375
ICSSP-727A ICSSP-727A-LV 73.937 30.375
ICSSP-728A ICSSP-728A-LV 82.687 30.375
Side Panels
Formed Inside Removable Side Panels are for applications where side access is limited and permanent fastening is needed.
Choose from solid or louvered styles.
Note
All side panels are surface mounted. Formed inside removable side panels add .375” per side to the overall unit width.
Vertical Frame Side Panel Part Numbers & Dimensions
Formed
Inside Removable
Louvered
Formed
Inside Removable
Solid
16 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Flush Mount Doors - Locking Handle Style
We see enclosures differently.™
ESQ
Left Hinged Right Hinged CB
ICDF-HSL-2119 ICDF-HSR-2119 18.835 20.937 12U
ICDF-HSL-2619 ICDF-HSR-2619 18.835 26.250 15U
ICDF-HSL-2819 ICDF-HSR-2819 18.835 27.937 16U
ICDF-HSL-4919 ICDF-HSR-4919 18.835 49.000 28U
ICDF-HSL-5219 ICDF-HSR-5219 18.835 52.500 30U
ICDF-HSL-6119 ICDF-HSR-6119 18.835 61.250 35U
ICDF-HSL-7019 ICDF-HSR-7019 18.835 70.000 40U
ICDF-HSL-7819 ICDF-HSR-7819 18.835 78.750 45U
Solid Style Part Numbers & Dimensions
Flush Mount Doors
Flush mount doors fit into the vertical panel opening of the frame. The doors utilize the mounting angles for an attachment point
so the frame is not drilled. Lift-off hinges, in a stylish black finish, allow for quick removal of the door. The contemporary low-
profile single point Lockable Handle provides the security your system may need.
Vented
Solid
Left Hinged Right Hinged CB
ICDF-HVL-2119 ICDF-HVR-2119 18.835 20.937 12U
ICDF-HVL-2619 ICDF-HVR-2619 18.835 26.250 15U
ICDF-HVL-2819 ICDF-HVR-2819 18.835 27.937 16U
ICDF-HVL-4919 ICDF-HVR-4919 18.835 49.000 28U
ICDF-HVL-5219 ICDF-HVR-5219 18.835 52.500 30U
ICDF-HVL-6119 ICDF-HVR-6119 18.835 61.250 35U
ICDF-HVL-7019 ICDF-HVR-7019 18.835 70.000 40U
ICDF-HVL-7819 ICDF-HVR-7819 18.835 78.750 45U
Vented Style Part Numbers & Dimensions
17
Parts
Surface Mount Doors
ESQ
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Left Hinged Right Hinged CB
ICDS-ESL-2119 ICDS-ESR-2119 20.763 23.469
ICDS-ESL-2819 ICDS-ESR-2819 20.763 30.496
ICDS-ESL-5219 ICDS-ESR-5219 20.763 55.875
ICDS-ESL-6119 ICDS-ESR-6119 20.763 64.625
ICDS-ESL-7019 ICDS-ESR-7019 20.763 73.375
ICDS-ESL-7819 ICDS-ESR-7819 20.763 82.125
Left Hinged Right Hinged CB
ICDS-EVL-2119 ICDS-EVR-2119 20.763 23.469
ICDS-EVL-2819 ICDS-EVR-2819 20.763 30.496
ICDS-EVL-5219 ICDS-EVR-5219 20.763 55.875
ICDS-EVL-6119 ICDS-EVR-6119 20.763 64.625
ICDS-EVL-7019 ICDS-EVR-7019 20.763 73.375
ICDS-EVL-7819 ICDS-EVR-7819 20.763 82.125
Solid Style Part Numbers & Dimensions Vented Style Part Numbers & Dimensions
Surface Mount Doors
Surface mount doors cover the vertical panel opening of the frame. The doors provide a contemporary appearance, featuring a
black low-profile lockable single point latch handle and stylized black hinges that allow for 120° of rotation. Surface doors provide
the space for mounting equipment behind the door panel. Since the frame must be drilled to accept surface doors, door
mounting location must always be supplied at the time of order placement. All surface doors are keyed alike.
Vented
Solid
18 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Top Options
We see enclosures differently.™
ESQ
Single Fan Panel Assembly
Single fan panel assemblies are supplied with 2 finger guards and a 72" 18/3 SJ gray power cord material with a NEMA 5-15P
90° right angle molded plug. The fan is UL yellow card recognized. File # E31293 and CSA certified File # LR52898. The fan has
a Feathered Edge™ blade for better noise control.
Operating Information
• 550 CFM 115 VAC, 60 HZ at free delivery
• Operating temperature range: -30°C to +60°C
• 10” Diameter Fan Size
• DB-55
Note
When mounted as a top panel, the fan
housing assembly extends into the
frame opening by 1.81”.
Part Numbers A C
CXPN-2119-FP 20.969 19.000
CXPN-2619-FP 26.219 19.000
Single Fan Panel Assembly Part Numbers & Dimensions
19
Parts
Equipment Support Options
ESQ
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Fixed Equipment Shelves
Fixed equipment shelves are designed to fit anywhere in vertical panel
openings of all ESQ frames.
The solid style shelf is manufactured of 16-gauge steel and has a load
capacity of 125-lbs. evenly distributed.
The perforated style shelf is manufactured of 14-gauge steel with a perfo-
rated center to offer air flow. Load capacity - 200-lbs. evenly distributed.
Pull Out Shelf
Pull-Out Shelves make it possible to slide equipment in and out of the
enclosure for fast, easy accessibility. Slide assemblies are mounted on
heavy-duty ball bearing slides for ease of movement. Load capacity -
90-lbs. evenly distributed. Slide Mounting Brackets are painted black.
Solid Perforated
Fixed Equip. Shelf Part Numbers & Dimensions
Pull Out Shelf Part Numbers & Dimensions
Part Numbers A C1
CCGS-22A 20.062 15.406
CCGS-25A 23.562 15.406
CCGS-31A 28.812 15.406
Solid Perforated AC
CSH-22A CSH-22A-PA 19.375 19.468
CSH-25A CSH-25A-PA 22.875 19.468
CSH-31A CSH-31A-PA 28.125 19.468
Part Numbers A A1 C1
CCSXQ-22 20.000 20.250 16.320
CCSXQ-25 23.500 20.250 16.320
CCSXQ-31 28.750 20.250 16.320
Chassis Guide Part Numbers & Dimensions
Chassis Guides
Chassis guides are used to support heavy equipment by means of
angular steel support members leaving the bottom of the mounted
equipment exposed for cooling or servicing. They are sold as pairs
and have a load capacity of 200 pounds evenly distributed.
Solid
20 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Equipment Support Options
We see enclosures differently.™
ESQ
Part Number
CKTAP-0319
Monitor Shelf
Monitor shelves provide an easy method of mounting non-rack mount style monitors and equipment into the sloped area of slope
front frames or into any vertical frame mounting location. These shelves are attached to the front flange of the enclosure’s panel
mounting angles and require no rear attachment point. Monitor shelves are available in both a solid or perforated option and they
carry a 50 lb. load rating. An adjustable bracket is included at the rear of the shelf to position the monitor as required. Additional
front-to-rear slots are provided to further secure the monitor as needed by strapping the unit to the shelf…strap not included.
Monitor Shelf Part Numbers & Dimensions
Perforated
Solid
Solid Perforated C C1
CSH-1619 CSH-1619-PA 18.641 16.359
Retractable Keyboard Tray Assembly
Emcor’s retractable keyboard tray assembly provides users the flexi-
bility to incorporate a full size PC keyboard within a frame’s 19" width
enclosure opening. The keyboard tray is housed within the enclosure
in a “front-to-rear” orientation. To access the keyboard, simply pull the
tray outward until it locks into the open position. The keyboard tray
can then be rotated 90° and affixed into position for operator use. A
low profile mouse pad is incorporated onto the front of the tray across
its entire width. In order to stow the keyboard back into the enclosure,
rotate the tray 90°, unlatch the locking slide, and retract the assembly
back into the frame. The keyboard tray assembly mounts to the
mounting angles and occupies only 3.5" (2U) of vertical rack space.
Part Number
CRKT-0319-S
Optional Hinged Access Panel
An optional 3.5” (2U) hinged access panel is
available for those users that wish to close off
the 2U opening when the keyboard is stowed.
21
Parts
Grounding Options
ESQ
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Part Numbers B
BB-21 21.220
BB-28 28.220
BB-52 52.500
BB-61 61.250
BB-70 70.000
BB-78 78.750
Bus Bars
Emcor offers insulated copper bus bars which attach to the top flange of the upper and lower frame struts. The bus bar is
supplied with #10-32 tapped holes on 3.5" centers. Only full height bus bars will mount to frames. Short height bus
bars will not align with frame mounting struts.
Ground Bus Plate
Ground bus plates provide equipment grounding capabilities that are unique when compared to the full length bus bars. The
copper ground bus plate provides fourteen (14) #10-32 tapped grounding points and mounts directly to the frame strut in a
vertical or horizontal position. The designed-in mounting flexibility allows for attachment of the ground bus plate in locations that
are much less likely to interfere with full depth internal frame equipment and accessories such as mounting brackets, equipment
shelves, chassis guides and others.
Mounting Detail
Mounting Detail
Part Number
GBP-0208
Note
When equipment support
items such as shelving or
drawers are being mounted
in the same frame as a bus
bar, the items must be
ordered short depth. Please
refer to the technical section
for more information on
short depth equipment.
22 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Notes
We see enclosures differently.™
ESQ
23
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
10 SERIES
Overview
The 10 Series Enclosure System is your choice for applications
requiring exceptional strength and weight load capabilities while
providing contemporary styling.
Features & Benefits
Modular
Fully welded construction
Clean, seamless corner design
Static Load capacity of 3500 pounds
14 gauge and 16 gauge material
Available in 19” panel widths
15U to 45U vertical panel openings (VPO)
Overall depth options of 26 5/16”, 31 9/16”, and 36 7/8”
Adjustable multi-formed mounting angles with rack unit markings
Table Of Contents
10 Series Product Line
VerticalFrames.......................22-23
Part Numbers & Dimensions
OrderingGuide.......................24-27
19” Panel Width
Parts ...............................28-36
Mounting Angles
Side Panels
Doors
Top Options
Bottom & Base Options
Equipment Support Options
Grounding Options
Universal Accessories . . . . . . . . . . . . . . . . . 37-52
Paint Options
Closure Panels
Wire Management
Power Options
Fan and Blower Options
Casters
Levelers
Hardware
•
•
•
•
•
•
•
•
•
24 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Frames
Frames
We see enclosures differently.™
10 SERIES
Frames
The highest quality cold rolled steel is used in the fabrication of all 10 series frames. Mounting angles and frame channels are
made of 14-gauge steel; frame bottom gusset plates 11-gauge steel, and frame side struts 16-gauge steel. The optional pontoon
base is constructed of 14-gauge steel. 10 series frames are fully welded and offer up to 3500 lbs of evenly distributed equipment
mounting in static load conditions.
All 10 Series Frames Include:
Hardware kit
2 pair adjustable EIA pattern thru hole panel mounting angles on the front and rear openings
Fixed mounting angles are placed in the slope and top openings of slope front frames.
Note
Panel Mounting Angles - Tapped (threaded) mounting angles are available. The tapped mounting angles will be mounted in the
position from which you deleted the non-tapped mounting angles, unless otherwise stated.
19" Wide CA A1 B B1
ICXFR-262619 22.562 26.313 22.813 13U 29.875 26.375 15U
ICXFR-314919 22.562 31.563 28.063 16U 52.625 49.125 28U
ICXFR-316119 22.562 31.563 28.063 16U 64.875 61.375 35U
ICXFR-317019 22.562 31.563 28.063 16U 73.625 70.125 40U
ICXFR-367019 22.562 36.875 33.375 19U 73.625 70.125 40U
ICXFR-317819 22.562 31.563 28.063 16U 82.375 78.875 45U
Vertical Frame Part Number and Descriptions
10 Series CA WFE J PNQR
26" Deep 26.313 24.912 25.062 20.936 20.436
31" Deep 31.563 30.162 30.312 26.186 25.686
36" Deep 36.875 35.475 35.625 31.499 30.999
19" Wide 22.562 19.062 18.310 17.810 17.984
Section View Dimensions
25
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax) Frames
Frames
10 SERIES
Vertical Frames
Section View
Side View Front View
Top View
Front ViewSection View
Bottom View
19” Wide Frames Side Panel Options
26 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Ordering Guide
19” Wide Frames Mounting Angle Options
We see enclosures differently.™
10 SERIES
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
Panel Mounting Angles [28] Mounting Straps [28]
Thru-Hole Tapped 1 Face Thru-Hole
Front (pr) Rear (pr) Front (pr) Rear (pr) Front (pr) Rear (pr)
Supplied with frame
XMA-26 XMA-26 XMA-26-T XMA-26-T XMS-26 XMS-26
XMA-49 XMA-49 XMA-49-T XMA-49-T XMS-49 XMS-49
XMA-61 XMA-61 XMA-61-T XMA-61-T XMS-61 XMS-61
XMA-70 XMA-70 XMA-70-T XMA-70-T XMS-70 XMS-70
XMA-70 XMA-70 XMA-70-T XMA-70-T XMS-70 XMS-70
XMA-78 XMA-78 XMA-78-T XMA-78-T XMS-78 XMS-78
Side Panels [29]
Outside Removable Solid Outside Removable Vented Latch Style
Left Right Left Right Wing Slotted Keyed Twist
Outside removable side panels require a latch
style to be selected. Choose from one of four
styles to the right. Two per side panel.
Outside removable side panels require a latch
style to be selected. Choose from one of four
styles to the right. Two per side panel.
ICXSP-2626-S ICXSP-2626-S ICXSP-2626-V ICXSP-2626-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
ICXSP-3149-S ICXSP-3149-S ICXSP-3149-V ICXSP-3149-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
ICXSP-3161-S ICXSP-3161-S ICXSP-3161-V ICXSP-3161-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
ICXSP-3170-S ICXSP-3170-S ICXSP-3170-V ICXSP-3170-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
ICXSP-3670-S ICXSP-3670-S ICXSP-3670-V ICXSP-3670-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
ICXSP-3178-S ICXSP-3178-S ICXSP-3178-V ICXSP-3178-V LATCH/WING LATCH/SLOTTED LATCH/KEYED LATCH/TWIST
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
27
www.emcorenclosures.com | 507-257-3535 (phone) | 507-287-3405 (fax) Ordering Guide
10 SERIES
19” Wide Frames Top Options
Top Panels [39] Single Fan Panels [32]
Solid Perforated Louvered Aluminum
CXPN-2219 CXPN-2219-PA CXPN-2219-LV CXPN-2219-A CXPN-2219-FP
CXPN-2819 CXPN-2819-PA CXPN-2819-LV N/A CXPN-2819-FP
CXPN-2819 CXPN-2819-PA CXPN-2819-LV N/A CXPN-2819-FP
CXPN-2819 CXPN-2819-PA CXPN-2819-LV N/A CXPN-2819-FP
CXPN-3319 CXPN-3319-PA CXPN-3319-LV N/A CXPN-3319-FP
CXPN-2819 CXPN-2819-PA CXPN-2819-LV N/A CXPN-2819-FP
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
19” Wide Frames Bottom Options
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
Bottom Panels [33] Pontoon Bases [33]
Solid Plain
CXBP-2619 CXPB-2619
CXBP-3119 CXPB-3119
CXBP-3119 CXPB-3119
CXBP-3119 CXPB-3119
CXBP-3619 CXPB-3619
CXBP-3119 CXPB-3119
28 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Ordering Guide
We see enclosures differently.™
10 SERIES
19” Wide Frames Flush Door Options
Flush Doors [30]
Flush Door
Front Rear
(1) Block Indicate:
H- Handle with Lock
(2) Block Indicate:
S- Solid
V- Vented
(3) Block Indicate:
L- Left Hinge
R- Right Hinge
(1) Block Indicate:
H- Handle with Lock
(2) Block Indicate:
S- Solid
V- Vented
(3) Block Indicate:
L- Left Hinge
R- Right Hinge
ICDF-(1)(2)(3)-2619 ICDF-(1)(2)(3)-2619
ICDF-(1)(2)(3)-4919 ICDF-(1)(2)(3)-4919
ICDF-(1)(2)(3)-6119 ICDF-(1)(2)(3)-6119
ICDF-(1)(2)(3)-7019 ICDF-(1)(2)(3)-7019
ICDF-(1)(2)(3)-7019 ICDF-(1)(2)(3)-7019
ICDF-(1)(2)(3)-7819 ICDF-(1)(2)(3)-7819
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
19” Wide Frames Surface Door Options
Surface Doors [31]
Surface Door
Front Rear
(1) Block Indicate:
S- Solid
V- Vented
(2) Block Indicate:
L- Left Hinge
R- Right Hinge
ICDS-X(1)(2)-2619 ICDS-X(1)(2)-2619
ICDS-X(1)(2)-4919 ICDS-X(1)(2)-4919
ICDS-X(1)(2)-6119 ICDS-X(1)(2)-6119
ICDS-X(1)(2)-7019 ICDS-X(1)(2)-7019
ICDS-X(1)(2)-7019 ICDS-X(1)(2)-7019
ICDS-X(1)(2)-7819 ICDS-X(1)(2)-7819
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
29
www.emcorenclosures.com | 507-257-3535 (phone) | 507-287-3405 (fax) Ordering Guide
10 SERIES
Equipment Support Options
Chassis Guides [34] Fixed Equipment Shelves [34] Monitor Shelves [35] Pull Out Shelves [34] Retractable Keyboard Trays [35]
Solid Perforated Solid Perforated Solid Tray Access Panel
CXCG-26 CXES-2619 CXES-2619-PA CXES-1619 CXES-1619-PA CXCSQ-2619 CRKT-0319-S CKTAP-0319
CXCG-31 CXES-3119 CXES-3119-PA CXES-1619 CXES-1619-PA CXCSQ-3119 CRKT-0319-S CKTAP-0319
CXCG-31 CXES-3119 CXES-3119-PA CXES-1619 CXES-1619-PA CXCSQ-3119 CRKT-0319-S CKTAP-0319
CXCG-31 CXES-3119 CXES-3119-PA CXES-1619 CXES-1619-PA CXCSQ-3119 CRKT-0319-S CKTAP-0319
CXCG-36 CXES-3619 CXES-3619-PA CXES-1619 CXES-1619-PA CXCSQ-3619 N/A N/A
CXCG-31 CXES-3119 CXES-3119-PA CXES-1619 CXES-1619-PA CXCSQ-3119 CRKT-0319-S CKTAP-0319
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
19” Wide Frames
19” Wide Frames Power Options
Frame
Vertical
ICXFR-262619
ICXFR-314919
ICXFR-316119
ICXFR-317019
ICXFR-367019
ICXFR-317819
Power Strips [42] Power Panels [43]
15 Amp Direct Wire 15 Amp Power Cord 20 Amp Power Cord 15 Amp Power Cord 20 Amp Power Cord
18" (6 outlets) 48" (10 outlets) 18" (6 outlets) 48" (10 outlets) 18" (6 outlets) 48" (10 outlets) (6 outlets) (6 outlets)
WM-180615-DW N/A WM-180615-PC N/A WM-180620-PC N/A PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
WM-180615-DW WM-481015-DW WM-180615-PC WM-481015-PC WM-180620-PC WM-481020-PC PDU-615R-PC PDU-620R-PC
30 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Mounting Angles & Mounting Straps
We see enclosures differently.™
10 SERIES
Mounting Angles
All 10 Series frames include 2 pair (4 total) thru-hole EIA compliant mounting angles. These thru-hole angles are constructed
of 14-gauge steel. Optional tapped mounting angles, constructed of 12-gauge steel, are available. The tapped mounting
angles have .281" diameter thru holes on one leg of the mounting angle, and .159" diameter tapped holes (10-32 NF2) on the
other leg. All mounting angles and straps are processed to specification ASTM-B633 which calls for electrodeposited zinc
plating with a clear chromate conversion coating.
Mounting Strap Part Numbers & DimensionsMounting Angle Part Numbers & Dimensions
Mounting Straps
For intermediate depth mounting needs,
10 Series mounting straps constructed
of 14-gauge steel provide users with
optimal flexibility and utility.
Thru-Hole Tapped 1 B
XMA-24 XMA-24-T 24.500 14U
XMA-26 XMA-26-T 26.250 15U
XMA-49 XMA-49-T 49.000 28U
XMA-61 XMA-61-T 61.250 35U
XMA-70 XMA-70-T 70.000 40U
XMA-78 XMA-78-T 78.750 45U
Thru-Hole B
XMS-24 24.500 14U
XMS-26 26.250 15U
XMS-49 49.000 28U
XMS-61 61.250 35U
XMS-70 70.000 40U
XMS-78 78.750 45U
Straps
Tapped 1 Face
Thru-Hole
31
Parts
Side Panels
10 SERIES
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Side Panels
Outside removable side panels makes secure access easy! Two formed tabs lock the side panel into the bottom of the frame. In
addition, two external latch holes near the top accommodate one of four fastener choices, which are ordered separately.
Vertical Side Panel Part Numbers & Dimensions
Solid Side Panel Vented Side Panel BA
ICXSP-2626-S ICXSP-2626-V 26.281 22.750
ICXSP-3149-S ICXSP-3149-V 49.031 28.000
ICXSP-3161-S ICXSP-3161-V 61.281 28.000
ICXSP-3170-S ICXSP-3170-V 70.031 28.000
ICXSP-3178-S ICXSP-3178-V 78.781 28.000
ICXSP-3670-S ICXSP-3670-V 70.031 33.250
Fastener Options
Identify the fastener function that best meets your requirement. Then, order two fastener per side panel as a sepa-
rate item on your order. The fastener will be fully assembled to the side panel by Emcor.
Part Number
LATCH/KEYED
Part Number
LATCH/SLOTTED
Part Number
LATCH/TWIST
Part Number
LATCH/WING
Vented
Solid
32 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Flush Doors - Locking Handle Style
We see enclosures differently.™
10 SERIES
Solid Style Part Numbers & Dimensions
Flush Mount Doors
Flush mount doors fit into the vertical panel opening of the frame. The doors utilize the mounting angles for an attachment point
so the frame is not drilled. Lift-off hinges, in a stylish black finish, allow for quick removal of the door. The contemporary low-
profile single point Lockable Handle provides the security your system may need.
Vented
Solid
Vented Style Part Numbers & Dimensions
Left Hinged Right Hinged CB
ICDF-HSL-2119 ICDF-HSR-2119 18.835 20.937 12U
ICDF-HSL-2619 ICDF-HSR-2619 18.835 26.250 15U
ICDF-HSL-2819 ICDF-HSR-2819 18.835 27.937 16U
ICDF-HSL-4919 ICDF-HSR-4919 18.835 49.000 28U
ICDF-HSL-5219 ICDF-HSR-5219 18.835 52.500 30U
ICDF-HSL-6119 ICDF-HSR-6119 18.835 61.250 35U
ICDF-HSL-7019 ICDF-HSR-7019 18.835 70.000 40U
ICDF-HSL-7819 ICDF-HSR-7819 18.835 78.750 45U
Left Hinged Right Hinged CB
ICDF-HVL-2119 ICDF-HVR-2119 18.835 20.937 12U
ICDF-HVL-2619 ICDF-HVR-2619 18.835 26.250 15U
ICDF-HVL-2819 ICDF-HVR-2819 18.835 27.937 16U
ICDF-HVL-4919 ICDF-HVR-4919 18.835 49.000 28U
ICDF-HVL-5219 ICDF-HVR-5219 18.835 52.500 30U
ICDF-HVL-6119 ICDF-HVR-6119 18.835 61.250 35U
ICDF-HVL-7019 ICDF-HVR-7019 18.835 70.000 40U
ICDF-HVL-7819 ICDF-HVR-7819 18.835 78.750 45U
33
Parts
Surface Doors
10 SERIES
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Surface Mount Doors
Surface mount doors cover the vertical panel opening of the frame. The doors provide a contemporary appearance, featuring
a black low-profile lockable single point latch handle and stylized black hinges that allow for 120° of rotation. Surface doors
provide the space for mounting equipment behind the door panel. Since the frame must be drilled to accept surface doors,
door mounting location must always be supplied at the time of order placement. All surface doors are keyed alike.
Vented
Solid
Left Hinged Right Hinged CB
ICDS-XSL-2619 ICDS-XSR-2619 21.437 29.125
ICDS-XSL-4919 ICDS-XSR-4919 21.437 51.875
ICDS-XSL-6119 ICDS-XSR-6119 21.437 64.125
ICDS-XSL-7019 ICDS-XSR-7019 21.437 72.875
ICDS-XSL-7819 ICDS-XSR-7819 21.437 81.625
Left Hinged Right Hinged CB
ICDS-XVL-2619 ICDS-XVR-2619 21.437 29.125
ICDS-XVL-4919 ICDS-XVR-4919 21.437 51.875
ICDS-XVL-6119 ICDS-XVR-6119 21.437 64.125
ICDS-XVL-7019 ICDS-XVR-7019 21.437 72.875
ICDS-XVL-7819 ICDS-XVR-7819 21.437 81.625
Solid Style Part Numbers & Dimensions Vented Style Part Numbers & Dimensions
34 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Top Options
We see enclosures differently.™
10 SERIES
Part Numbers AC
CXPN-2219-FP 22.719 19.000
CXPN-2819-FP 27.969 19.000
CXPN-3319-FP 33.282 19.000
Single Fan Panel Assembly
Single fan panel assemblies are supplied with 2 finger guards and a 72" 18/3 SJ gray power cord material with a NEMA 5-15P
90° right angle molded plug. The fan is UL yellow card recognized. File # E31293 and CSA certified File # LR52898. The fan has
a Feathered Edge™ blade for lower noise control.
Operating Information
• 550 CFM 115 VAC, 60 HZ at free delivery
• Operating temperature range: -30°C to +60°C
• 10” Diameter Fan Size
• DB-55
Note
When mounted as a top panel, the
fan housing assembly extends into
the frame opening by 2.06”.
Single Fan Panel Assembly Part Numbers & Dimensions
35
Parts
Bottom & Base Options
10 SERIES
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Part Nubmers CA
CXPB-2619 22.562 25.812
CXPB-3119 22.562 31.062
CXPB-3619 22.562 36.375
Pontoon Base Detail Pontoon Base
Pontoon Base
A pontoon base is available for applications where raising the enclosure above the floor is required, protecting equipment from
possible water damage.
Vertical and Slope Front Frame Part Numbers & Dimensions Note
All frames overhang the pontoon bases 0.5"
at front. The base is mounted at the factory
to accommodate caster or leveler mounting
unless floor tie-down has been specified.
Solid Perforated CAA1
CXBP-2619 CXBP-2619-PA 17.686 22.812 21.436
CXBP-3119 CXBP-3119-PA 17.686 28.062 26.686
CXBP-3619 CXBP-3619-PA 17.686 33.375 31.999
Bottom Panel Part Numbers & Dimensions
Bottom Panels
Bottom panels are designed to mount to the bottom of the frame.
Chassis Guides
Chassis guides are used to support heavy equipment by means of angular
steel support members leaving the bottom of the mounted equipment
exposed for cooling or servicing. They are sold as pairs and have a load
capacity of 200 pounds evenly distributed.
Fixed Equipment Shelves
These 14-gauge steel fixed equipment shelves are designed to fit anywhere in
the vertical panel openings of all 10 Series frames. A 1.5” x 8.5” slot is provided
at the rear for passage of wires, cables, etc.
Solid style shelves provide an evenly distributed load capacity of up to 350 lbs.
Perforated style shelves offer an evenly distributed load capacity of 200 lbs.
and provide air flow through the perforated area to assist in equipment cooling.
Pull Out Shelf
Pull-Out Shelves make it possible to slide equipment in and out of the
enclosure for fast, easy accessibility. Slide assemblies are mounted on
heavy-duty ball bearing slides for ease of movement. Load capacity -
90-lbs. evenly distributed. Slide Mounting Brackets are painted black.
Solid Perforated
Fixed Equipment Shelf Dimensions
Pull Out Shelf Dimensions
Part Numbers A C1
CXCG-20 16.688 14.016
CXCG-26 21.688 14.016
CXCG-31 26.938 14.016
CXCG-36 32.250 14.016
Solid Perforated AC
CXES-2019 CXES-2019-PA 15.938 17.99
CXES-2619 CXES-2619-PA 20.93 17.99
CXES-3119 CXES-3119-PA 26.18 17.99
CXES-3619 CXES-3619-PA 31.493 17.99
Part Numbers A A1 C1
CXCSQ-2019 18.882 20.250 16.320
CXCSQ-2619 23.874 20.250 16.320
CXCSQ-3119 29.124 20.250 16.320
CXCSQ-3619 34.437 20.250 16.500
Chassis Guide Dimensions
36 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
Equipment Support Options
We see enclosures differently.™
10 SERIES
Solid
37
Parts
10 SERIES
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Equipment Support Options
Monitor Shelf
Monitor shelves provide an easy method of mounting non-rack mount style monitors and equipment into the sloped area of slope
front frames or into any vertical frame mounting location. These shelves are attached to the front flange of the enclosures mounting
angles and require no rear attachment point. Monitor shelves are available in both a solid or perforated styles and they carry a
50 pound load rating. An adjustable bracket is included at the rear of the shelf to position the monitor as required. Additional
front-to-rear slots are provided to further secure the monitor as needed by strapping the unit to the shelf…strap not included.
Monitor Shelf Part Numbers & Dimensions
Perforated
Solid
Solid Perforated C C1
CXES-1619 CXES-1619-PA 18.940 16.350
Retractable Keyboard Tray Assembly
Emcor’s retractable keyboard tray assembly provides users the flexi-
bility to incorporate a full size PC keyboard within a frame’s 19" width
enclosure opening. The keyboard tray is housed within the enclosure
in a “front-to-rear” orientation. To access the keyboard, simply pull the
tray outward until it locks into the open position. The keyboard tray
can then be rotated 90° and affixed into position for operator use. A
low profile mouse pad is incorporated onto the front of the tray across
its entire width. In order to stow the keyboard back into the enclosure,
rotate the tray 90°, unlatch the locking slide, and retract the assembly
back into the frame. The keyboard tray assembly mounts to the
mounting angles and occupies only 3.5" (2U) of vertical rack space.
Part Number
CRKT-0319-S
Optional Hinged Access Panel
An optional 3.5” (2U) hinged access panel is
available for those users that wish to close off
the 2U opening when the keyboard is stowed.
Part Number
CKTAP-0319
38 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Parts
We see enclosures differently.™
10 SERIES
Bus Bars
Emcor offers insulated copper bus bars which attach to the top flange of the upper and lower frame struts. The bus bar is sup-
plied with #10-32 tapped holes on 3.5" centers. Only full height bus bars will mount to frames. Short height bus bars will
not align with frame mounting struts.
Ground Bus Plate
Ground bus plates provide equipment grounding capabilities that are unique when compared to the full length bus bars. The
copper ground bus plate provides fourteen (14) #10-32 tapped grounding points and mounts directly to the frame strut in a
vertical or horizontal position. The designed-in mounting flexibility allows for attachment of the ground bus plate in locations
that are much less likely to interfere with full depth internal frame equipment and accessories such as mounting brackets,
equipment shelves, chassis guides and others.
Mounting Detail
Mounting Detail
Part Number
XGBP-0208
Note
When equipment support
items such as shelving or
drawers are being mounted
in the same frame as a bus
bar, the items must be
ordered short depth.
Please refer to the technical
section for more information
on short depth equipment.
Part Numbers B
XBB-26 26.250 15U
XBB-49 49.000 28U
XBB-61 61.250 35U
XBB-70 70.000 40U
XBB-78 78.750 45U
39
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
ACCESSORIES
Table Of Contents
Universal Accessories
Universal Accessories . . . . . . . . . . . . . . . . . 37-52
Paint Options
Closure Panels
Wire Management
Power Options
Fan and Blower Options
Casters
Levelers
Hardware
ESQProductLine......................5-20
Part Numbers & Dimensions
Ordering Guide
10 Series Product Line . . . . . . . . . . . . . . . . 21-36
Part Numbers & Dimensions
Ordering Guide
Accessories that can be used with all Emcor product lines.
40 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Paint Colors
We see enclosures differently.™
ACCESSORIES
Antique White TX-AWP Putty TX-PTP Fawn TX-FNP
Neutral TX-NUPGraystone TX-GSPSteel TX-STPBlack TX-BKP
Hi-tech Gray TX-HTGP
Caribbean Blue TX-CRBP
Emcor Paint Colors
It is necessary to specify paint color for all paintable materials. Emcor offers nine proprietary paint colors to choose from. If you
require a custom paint color, we will match your paint chip or any Federal Standard 595 color with the assistance of our digital
color computer to guarantee you a consistent color match every time. Contact the factory for pricing and details.
Touch Up or Refinishing Paint
Need to paint existing products to match your Emcor consoles and enclosures, or just need to touch up. Emcor supplies its pro-
prietary paint in the following forms. Air Dry Formulation: 12oz. Aerosol Spray - Quart - Gallon
Baking Formulation: Quart - Gallon
Touch-Up or Refinishing Paint Part Numbers
Air Dry Formulation Baking Formulation
12oz. Aerosol
Spray Can Quart Gallon Quart Gallon
LAS-AW LA-AW-Q LA-AW-G EN-AW-Q EN-AW-G Antique White
LAS-NU LA-NU-Q LA-NU-G EN-NU-Q EN-NU-G Neutral
LAS-GS LA-GS-Q LA-GS-G EN-GS-Q EN-GS-G Graystone
LAS-CRB LA-CRB-Q LA-CRB-G EN-CRB-Q EN-CRB-G Caribbean Blue
LAS-FN LA-FN-Q LA-FN-G EN-FN-Q EN-FN-G Fawn
LAS-ST LA-ST-Q LA-ST-G EN-ST-Q EN-ST-G Steel
LAS-PT LA-PT-Q LA-PT-G EN-PT-Q EN-PT-G Putty
LAS-BK LA-BK-Q LA-BK-G EN-BK-Q EN-BK-G Black
LAS-HTG LA-HTG-Q LA-HTG-G EN-HTG-Q EN-HTG-G Hi-Tech Gray
Note
The color samples shown above are for reference only, and may not match the actual paint colors due
to variations in the printing process. Actual paint samples are available upon request.
Material
Solid
16-Gauge cold rolled steel
Louvered
16-Gauge cold rolled steel
Perforated
16-Gauge cold rolled steel
Aluminum
6061-T6 aluminum
41
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Closure Panels
ACCESSORIES
19" Wide
Solid Louvered Perforated Aluminum BC
CXPN-0119 N/A N/A CXPN-0119-A 1.719 1U 19.000
CXPN-0319 N/A N/A CXPN-0319-A 3.469 2U 19.000
CXPN-0519 CXPN-0519-LV N/A CXPN-0519-A 5.219 3U 19.000
CXPN-0719 CXPN-0719-LV N/A CXPN-0719-A 6.969 4U 19.000
CXPN-0819 CXPN-0819-LV N/A CXPN-0819-A 8.719 5U 19.000
CXPN-1019 CXPN-1019-LV N/A CXPN-1019-A 10.469 6U 19.000
CXPN-1219 CXPN-1219-LV N/A CXPN-1219-A 12.219 7U 19.000
CXPN-1419 CXPN-1419-LV CXPN-1419-PA CXPN-1419-A 13.969 8U 19.000
CXPN-1519 CXPN-1519-LV N/A CXPN-1519-A 15.719 9U 19.000
CXPN-1719 CXPN-1719-LV N/A CXPN-1719-A 17.469 10U 19.000
CXPN-1919 CXPN-1919-LV N/A CXPN-1919-A 19.219 11U 19.000
CXPN-2119 CXPN-2119-LV CXPN-2119-PA CXPN-2119-A 20.969 12U 19.000
CXPN-2219 CXPN-2219-LV CXPN-2219-PA CXPN-2219-A 22.719 13U 19.000
CXPN-2419 CXPN-2419-LV N/A N/A 24.469 14U 19.000
CXPN-2619 CXPN-2619-LV CXPN-2619-PA N/A 26.219 15U 19.000
CXPN-2819 CXPN-2819-LV CXPN-2819-PA N/A 27.969 16U 19.000
CXPN-3319 CXPN-3319-LV CXPN-3319-PA N/A 33.250 19U 19.000
Closures Panels
Closure panels are designed to attach to the top, front, rear, and slope opening areas of your frame.
Closure Panel Dimensions
Solid
[formed]
Louvered
[formed]
Perforated
[formed]
Aluminum
[flat]
42 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Wire Management Panels
Wire management panels may be located front-to-rear at almost any location within an Emcor enclosure. These panels provide
secure mounting for cables, power strips, and a wide variety of wire-management accessory components.
Note
When equipment support items such as shelving or drawers are being mounted in the same frame as the wire management
panel, the items must be ordered short-depth. Please refer to the technical section for more information on short-depth equipment.
Part Numbers Installs in Frames
with Vertical Opening
WMP-21 21.000 12U
WMP-26 26.250 15U
WMP-28 28.000 16U
WMP-43 43.750 25U
WMP-49 49.000 28U
WMP-52 52.500 30U
WMP-61 61.250 35U
WMP-70 70.000 40U
WMP-78 78.750 45U
Wire Management Panels
We see enclosures differently.™
ACCESSORIES
43
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Wire Management Accessories
Velcro Straps
Emcor’s black velcro grip tie straps are available in bags of ten. Mounting
clips and screws included for attaching to the wire management panel.
Wire Clamps
Emcor’s gray plastic wire clamps attach to the wire management panel,
and are designed to securely clamp wiring or cabling in place.
Finger Duct Assembly
Emcor’s gray polypropylene finger duct assembly allows for easy and
protected routing of cabling.
1U Cable Management Panel
Emcor’s rack mount cable management panel provides a simple and
convenient method of organizing and routing cabling.
“D” Ring
Emcor’s black cable management “D” Rings provide for easy vertical
routing of cabling.
Cable Access Panel
This panel is supplied with an 11” x 1.5” cable access cutout with
protective grommet material.
Part Numbers C
CXPN-0319-CAP 19.000
Note
Additional grommet material
is available. Sold by the foot.
Part Number
GMT-0012
Part Number
CMP-1U-19
Part Number
DFD-22
Part Number
DWC-0225
Part Number
DCR-2375
Part Number
DVS-11
ACCESSORIES
Note
When equipment support items such as shelving
or drawers are being mounted in the same frame
as a power strip, the items must be ordered
short-depth. Please refer to the technical section
for more information on short-depth equipment.
Stand Off Brackets
A pair of stand-off brackets are supplied with each power strip.
44 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Power Strips
We see enclosures differently.™
ACCESSORIES
Power Strips
Corded power strips are available in either 18" six outlet or 48" ten outlet lengths with 15 or 20 Amp circuit breakers. Direct wire
15 Amp power strips are also available in both lengths. All power strips are UL listed.
Part Numbers Number of
Outlets
Wire
Gauge
Circuit
Breaker
Electrical
Input Plug Type
WM-180615-PC 6 14/3 SJT 15 AMP 15' Power Cord NEMA 5-15P Molded
WM-481015-PC 10 14/3 SJT 15 AMP 15' Power Cord NEMA 5-15P Molded
Part Numbers Number of
Outlets
Wire
Gauge
Circuit
Breaker
Electrical
Input Plug Type
WM-180620-PC 6 12/3 SJT 20 AMP 15' Power Cord NEMA 5-20P Molded
WM-481020-PC 10 12/3 SJT 20 AMP 15' Power Cord NEMA 5-20P Molded
Part Numbers Number of
Outlets
Wire
Gauge
Circuit
Breaker
Electrical
Input Plug Type
WM-180615-DW 6 14/3 SJT 15 AMP 12" Wire Leads ---
WM-481015-DW 10 14/3 SJT 15 AMP 12" Wire Leads ---
45
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Power Panels
ACCESSORIES
Part Number Number of
Outlets
Wire
Gauge
Circuit
Breaker
Electrical
Input Plug Type
PDU-615R-PC 6 14/3 SJT 15 AMP 15' Power Cord NEMA 5-15P Molded
Part Number Number of
Outlets
Wire
Gauge
Circuit
Breaker
Electrical
Input Plug Type
PDU-620R-PC 6 12/3 SJT 20 AMP 15' Power Cord NEMA 5-20P Molded
Power Panels
Rack mount power panels can be installed in any 19" wide frame and occupies only 1.75" (1U) of vertical panel space. The
power panel is supplied in a black finish and is equipped with six outlets, each facing the interior of the cabinet for component
power distribution. All power panels are UL listed.
46 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Fans & Fan Trays
We see enclosures differently.™
ACCESSORIES
Part Numbers C
CXPN-0519-FP-2E 19.000 Exhaust
CXPN-0519-FP-2I 19.000 Intake
Dual Fan Panel Assembly
• 102 CFM per fan (204 total), 13 watts, 115 VAC, 50/60 HZ, 41 dBA
• 19" and 24" panel widths
• Fan size – 4.625” square x 1.5” deep
• Operating temperature range: -20°C to +70°C
• Fans are UL recommended File # E3670 and CSA certified File # 29590
• Supplied with an installed 72” 18/3 SJT black power cord with a NEMA 5-15P plug
intake exhaust
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
• 1.75" panel height
• 19" panel width
• Field adjustable filler strips and rear support brackets
• 115 Volt AC power
• DC voltage available upon request
• 72" cord with a NEMA 5-15P 90° right angle molded plug
• UL recognized, CSA certified fans
• Exhaust guards on the top and bottom
• Filler strips to prevent the recirculation of air
• High quality gray paint finish
Part Numbers # of Fans CFM Speed Amps Volts Watts dBA
RUN L.R.*
FT-291-3 3 291 3225 0.48 0.72 115 39.9 58
FT-582-6 6 582 3225 0.96 1.44 115 79.8 60
*Locked Rotor Air delivery based on operating at 115 volts, 60 HZ, single phase power.
3 Fan
6 Fan
47
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Packaged Blowers
ACCESSORIES
Packaged Blowers
Packaged blowers have been designed to effectively cool critical electronic components within an enclosure by means of
clean positive air pressure. Each blower is supplied with a highly efficient U/L approved motor, statically balanced wheels,
brushed stainless steel grille, permanent washable filter, and an epoxy finish.
Note
All the blowers listed are for standard 19" rack mount frames. When the 19" rack mount blower is to be installed in a 24"
rack mount frame, adapter brackets must be ordered separately. The correct adapter bracket number is listed on each table.
FILTER: Permanent washable type which can be serviced without
removing the blower from the rack.
MOTOR: Shaded-pole, rust resistant shaft, double shielded ball bear-
ings, permanently lubricated with a 20° F to 250° F lubricant. UL and
CSA approved. Some motors are permanent split capacitor style.
CORD: 72" 18/3 SJ gray power cord material with a NEMA 5-15P
90° right angle molded plug.
Part Number Performance Data NC** Dimensional
Data
CFM RPM AMPS WATTS
BL-125EG RUN L.R.* 70 A B
125 3000 0.9 1.2 50 9.031 5.250
Weight
13.25 lbs.
Adapter bracket assembly part number ABA-05
Replacement Filter Part Number FI-0519
Part Number Performance Data NC** Dimensional
Data
CFM RPM AMPS WATTS
BL-290EG RUN L.R.* 125 AB
290 3050 1.8 2.5 60 9.031 5.250
Weight
14.25 lbs.
Adapter bracket assembly part number ABA-05
Replacement Filter Part Number FI-0519
Part Number Performance Data NC** Dimensional
Data
CFM RPM AMPS WATTS
BL-300EG RUN L.R.* 95 AB
300 1550 1.2 1.6 50 10.188 7.000
Weight
18.00 lbs
Adapter bracket assembly part number ABA-07
Replacement Filter Part Number FI-0719
Part Number Performance Data NC** Dimensional
Data
CFM RPM AMPS WATTS
BL-350EG RUN L.R.* 200 AB
350 3100 1.8 4 65 10.219 7.000
Weight
18.50 lbs.
Adapter bracket assembly part number ABA-07
Replacement Filter Part Number FI-0719
Part Number Performance Data NC** Dimensional
Data
CFM RPM AMPS WATTS
BL-500EG RUN L.R.* 140 AB
500 1700 1.6 3.5 55 11.563 8.750
Weight
24.25 lbs.
Adapter bracket assembly part number ABA-08
Replacement Filter Part Number FI-0819
* Locked Rotor **Noise Criteria Air delivery based on operating at 115 volts, 60 HZ, single phase power.
48 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Casters
We see enclosures differently.™
ACCESSORIES
Weight Load
Light Duty
Medium Duty
Heavy Duty
Swivel Style
Rigid Style
Locking
Non-Locking
Single Wheel
Dual Wheel
Type of Wheel
Size of Wheel
Sold As Load Rating Caster Style Description
Set (4) 75 x x x x Soft Rubber 2"
Set (4) 75 xxxxPolypropylene 2"
Set (4) 180 x x x x Hard Rubber 2"
Each (1) 200 xxxxSoft Rubber 4"
Each (1) 200 x x x x Soft Rubber 4"
Each (1) 375 xx xx Hard Rubber 4"
Each (1) 375 x x x x Hard Rubber 4"
Each (1) 350 xx xx Polypropylene 3"
Each (1) 350 x x x x Polypropylene 3"
Casters
Emcor offers many different casters.
Some are for use with pontoon
bases, some can be used directly on
the frame, and some are only used in
special circumstances.
Please read the table carefully to
make certain you select the correct
caster for your needs.
Part Number
HW-484
Part Number
HW-485
Part Number
HW-486
Part Number
HW-401
Part Number
HW-408
Part Number
HW-451
Part Number
HW-451-LK
Part Number
HW-450
Part Number
HW-450-LK
Height added by casters when mounted directly to the frame.
49
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Casters - Where Used
ACCESSORIES
10 Series
Where Used Where Used
•Pontoon Base Only
•Pontoon Base Only
•Pontoon Base Only •Pontoon Base Only
•Pontoon Base Only •Pontoon Base Only
•Pontoon Base Only •Pontoon Base Only
•Pontoon Base Only
•Pontoon Base Only
•Pontoon Base
In Conjunction with UPLK-01 Leveler Kit •
Frame
Fork Lift Base
In Conjunction with XLK-01 Leveler Kit (frame)
In Conjunction with UPLK-01 Leveler Kit (pontoon base)
•Pontoon Base
In Conjunction with UPLK-01 Leveler Kit •
Frame
Fork Lift Base
In Conjunction with XLK-01 Leveler Kit (frame)
In Conjunction with UPLK-01 Leveler Kit (pontoon base)
Height added by casters when mounted to the pontoon base.
ESQ
Part Number
HW-484
Part Number
HW-485
Part Number
HW-486
Part Number
HW-401
Part Number
HW-408
Part Number
HW-451
Part Number
HW-451-LK
Part Number
HW-450
Part Number
HW-450-LK
50 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Levelers, Floor Locks, & Leveler Kits
We see enclosures differently.™
ACCESSORIES
Sold As
Each (1)
Set (4)
Set (4)
Set (4)
Set (4)
Part Number
HW-405
Part Number
XLK-02
Part Number
ALDX-XXX-180019
Part Number
XLK-01
Part Number
UPLK-01
Levelers
Emcor offers two levelers. These may be used directly on the base
of a frame or incorporated in one of our leveler kits. Please read the
table carefully to make certain that you select the correct leveler for
your needs.
Levelers
Leveler Kits
Leveler Kits
Emcor has created leveler kits for use with pontoon bases and for use
directly on the frame. Please read the table carefully to make certain
that you select the correct leveler kit for your needs. Additionally you
can choose kits that accept levelers only, or choose one that will ac-
cept both levelers and casters. All kits include the levelers; however,
the casters are sold separately.
Height added by leveler kits.
Shown with optional caster.
Shown w/o optional caster
Shown w/o optional caster
51
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Levelers - Where Used
ACCESSORIES
ESQ
Where Used
10 Series
Where Used
•Leveler Kits •Leveler Kits
•All frames w/o a pontoon base
(Includes Leveler HW-405)
•All frames with a pontoon base
(Includes Leveler HW-405) •All frames with a pontoon base
(Includes Leveler HW-405)
•All frames w/o a pontoon base
(Includes Leveler HW-405)
Casters sold separately: HW-450 or HW-450-LK
•All frames with a pontoon base
(Includes Leveler HW-405)
Casters sold separately: HW-450 or HW-450-LK •All frames with a pontoon base
(Includes Leveler HW-405)
Casters sold separately: HW-450 or HW-450-LK
Levelers
Leveler Kits
Part Number
HW-405
Part Number
XLK-02
Part Number
ALDX-XXX-180019
Part Number
XLK-01
Part Number
UPLK-01
52 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
Hardware
We see enclosures differently.™
ACCESSORIES
ESQ
10 Series
AHWX-012-083219 #10-32 x .500 Pan Head
Machine Screw ••
AHWX-012-103219 #10-32 x .625 Pan Head
Machine Screw ••
AHWX-092-003219
- or-
HW-092
#10-32 Clip Nut ••
AHWX-102-002025 1/4-20 Keps Nut ••
AHWX-192-002025 1/4-20 Clip Nut ••
AHWX-722-102025 1/4-20 x 5/8 Screw ••
AJCX-HDX-000100 Joining Clip ••
XJCX-F10-000000 Joining Clip •
Part Number Description
Used to secure lift off side panels for shipping with AHWX-092-003219
captive clip nut and HW-188 flat washer.
16, 14, and 11 gauge material with HW-103 or HW-104 truss head
machine screw when mounting 5/8” thick or 1/8” thick panels.
Clear zinc plated. Used with hex head machine screw HW-150.
Used for mounting standard 10 Series panel mounting angles to the
side strut, and all pontoon bases to frames with AHWX-722-102025.
Used for mounting standard 10 Series panel mounting angles to the
side strut, and all pontoon bases to frames with AHWX-192-002025
captive clip nut.
Used to bolt a turret frame to a vertical frame or join frames front to
rear. Sold in pairs. Includes all mounting hardware.
Used to bolt all 10 Series vertical or slope front frames side by side.
Sold in pairs. Includes all mounting hardware.
Where Used
53
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox) Universal Accessories
Hardware
ACCESSORIES
ESQ
10 Series
HW-110 #10 self-tapping screw
“A” threads. ••
HW-103 #10-32 x 1.125
Panel Screw ••
HW-104 #10-32 x .500
Panel Screw ••
HW-1032 #10-32 Aluminum Panel
Standoff ••
HW-159 #8-32 Keps Nut ••
HW-161 5/16-18 x 3/4 Hex Head Screw •
HW-163 5/16-18 Keps Nut •
HW-175 M6 Cage Nut •
HW-101 M6 x 1.00” Screw •
Part Number Description
Used for mounting laminated closure panels.
Used for mounting formed steel closure panels to tapped mounting
angles or when using clip nut AHWX-092-003219.
Comes with polyethylene washer.
Used when mounting 1/8” thick flat aluminum panels to tapped mounting
angles or when using clip nut AHWX-092-003219.
Comes with polyethylene washer.
Used for mounting 1/8” thick aluminum panels to bring flush with front of
frame with HW-154 keps nut and HW-104 panel screw.
Used for joining ESQ frames together side by side using HW-162 flat
washer and HW-163 keps nut.
Used for joining ESQ frames together side by side using HW-161screw
and HW-162 flat washer.
Used with HW-101M6 screw to face mounting equipment to Dell
compatible (square hole) mounting angles.
Used with HW-175 M6 cage nut to face mounting equipment to Dell
compatible (square hole) mounting angles.
Where Used
Vent Panel
Steel vent panels provide an effective means to fulfill your venting requirements.
Vent Grille
Aluminum vent grilles provide an effective means to fulfill your venting requirements.
Filter Retainer Assembly
These assemblies mount directly behind aluminum vent grilles, providing protection from airborne particles.
Filters are washable and permanent.
Part Numbers BC% Opening
AVGX-XXX-000319 3.500 2U 19.000 45
AVGX-XXX-000519 5.250 3U 19.000 50
AVGX-XXX-000719 7.000 4U 19.000 52.5
AVGX-XXX-000819 8.750 5U 19.000 54
19" Wide BC% Opening
CXPN-0319-VP 3.500 2U 19.000 33.8
Part Numbers BC% Opening
ARFA-000319 3.500 2U 19.000 47.2
ARFA-000519 5.250 3U 19.000 52.5
ARFA-000719 7.000 4U 19.000 55.1
ARFA-000819 8.750 5U 19.000 56.6
Part Numbers
54 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Universal Accessories
General Accessories
We see enclosures differently.™
ACCESSORIES
55
www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fox)
General Technical Information
ACCESSORIES
Tolerances
Nominal panel sizes are in increments of 1.75". Frame openings include a .125" tolerance
factor except the slope and top openings, which have a .063" factor.
Rack Unit Inches
49U 85.75"
46 U 80.50"
45 U 78.75"
44 U 77.00"
43 U 75.25"
42 U 73.50"
41 U 71.75"
40 U 70.00"
39 U 68.25"
38 U 66.50"
37 U 64.75"
36 U 63.00"
35 U 61.25"
34 U 59.50"
33 U 57.75"
32 U 56.00"
31 U 54.25"
30 U 52.50"
29 U 50.75"
28 U 49.00"
27 U 47.25"
26 U 45.50"
25 U 43.75"
24 U 42.00"
23 U 40.25"
22 U 38.50"
21 U 36.75"
20 U 35.00"
19 U 33.25"
18 U 31.50"
17 U 29.75"
16 U 28.00"
15 U 26.25"
14 U 24.50"
13 U 22.75"
12 U 21.00"
11 U 19.25"
10 U 17.50"
9 U 15.75"
8 U 14.00"
7 U 12.25"
6 U 10.50"
5 U 8.75"
4 U 7.00"
3 U 5.25"
2 U 3.50"
1 U 1.75"
Rack Unit Conversion Table Standard EIA Hole Spacing Pattern
56 www.emcorenclosures.com | 507-287-3535 (phone) | 507-287-3405 (fax)
Notes
We see enclosures differently.™
ACCESSORIES
7-94 ESQ
125-184 10 Series®
329-348 Accessories
Console and Enclosure Product Line
Console & Enclosure Product Line
Accessories that fit all Product Lines
Emcor enclosures are designed and manufactured by Crenlo
Crenlo I 1600 4th Avenue NW I Rochester, MN 55901
507-289-3371 (phone) I 507-287-3405 (fax) I www.crenlo.com
CRN.1965 10.11
