44661 Catalog
2014-09-27
: Pdf 44661-Catalog 44661-Catalog 685360 Batch8 unilog
Open the PDF directly: View PDF .
Page Count: 44
Download | |
Open PDF In Browser | View PDF |
TABLE OF CONTENTS Bathroom Ventilation Environmental Series Humidity Sensing 7000 Series 6000 Series Decorative Quick Mount Economy Compact Ductless Combination Fans Infrared Bulb Heaters General Home Kitchen & Utility Fans Commercial and Inline Ventilators Fire Rated Ventilators Bathroom Fan Accessories Whole House & Attic Ventilators 4-5 6-7 8-9 10-11 12 13-14 15 16 17 18 19-20 21 22-25 26 27-29 30 Whole House Fans Attic Ventilators Commercial Wall Fans 30-31 32 33 Low Profile Air Curtains 34-35 Door Chimes 36 Door Chimes and Push Buttons Chime Kits Bells and Buzzers & Accessories Electric Heat 36 37 37 38 Baseboard Heaters Wall Heaters Thermostats Commercial Ceiling Fans Wall Mounted Speed Controls Limited Warranty 2 4 Visit us on the web at www.marleymep.com 38-39 40 42 43 43 43 INTRODUCTION INTRODUCTION Marley Engineered Products, manufacturer of Marley Builder Products, is located in Bennettsville, SC. and offers a full line of electric heating and ventilation products for the home and office, providing comfort and piece of mind. Comfort- Choose from an assortment of electric comfort heating products. Take care of those cold spots in the house with baseboard heaters. Warm that cold bathroom or entryway with a fan forced wall heater and spot heat the work area with a radiant workshop heater. Piece of mind- Use humidity sensing bath fans to ventilate moist air from bathrooms or ventilate the house with a whole house fan. Protect the home from damaging heat and lessen the burden on the air conditioner with an attic or gable ventilator. Remove harmful radon from the crawl space of your house with an inline vent and radon mitigation kit. The following logos are used throughout this catalog. Use this legend for clarification. Earning the ENERGY STAR means products meet strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy. ENERGY STAR qualified ventilation fans that include lighting use 65% less energy on average than standard models, saving $120 in electricity costs over the life of the fan. These fans are more than 50% quieter than standard models. They feature high performance motors and improved blade design, providing better performance and longer life. Choosing ENERGY STAR qualified products helps prevent global warming and promotes cleaner air. Products that bear the HVI Tested/Certified label have been tested at independent HVI approved laboratories and can be depended upon to perform to the ratings shown. Indoor fans carry dual ratings for sound output as well as ventilating performance. ventilating performance is given in CFM (cubic feet per minute) and sound ratings are listed in sones. A sone is an internationally recognized measurement of sound which reports decibel levels in a simplified numbered scale which corresponds to a persons perception of loudness. The sone measurement follows a linear scale, meaning double the number is double the perceived loudness. One sone is about the equivalent of a quiet refrigerator. These products are U.L. listed by Underwriters Laboratory, ensuring that the products have passed Underwriters Laboratory’s rigorous testing procedures for electrical products and have been assigned the listing number required for specific electrical codes in the US. These products are U.L. listed by Underwriters Laboratory, ensuring that the products have passed Underwriters Laboratory’s rigorous testing procedures for electrical products and have been assigned the listing number required for specific electrical codes in the US and Canada. A product bearing the c ETL us Listed mark signifies that it was tested and meets the minimum requirements of prescribed product safety standards for US and Canada. Moreover, the mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance. The CSA mark is recognized and accepted throughout Canada and the U.S., at federal, state, provincial, and municipal levels. It means that the product is certified for the Canadian and US markets, and is certified to the applicable Canadian and US standards. Marley Bath Fans are the easiest to install. Many models feature the patented snap-in junction box cover. This feature serves two purposes: (1) allows fan to plug directly into box; no additional wiring needed, and (2) section snaps out quickly to allow larger area to wiring. Designated Marley Fans can be installed in a tub or shower enclosure when wired with a GFI protected circuit. Visit us on the web at www.marleymep.com 3 ENVIRONMENTAL SERIES Ultra Quiet Environmental Series Environmental Series Bath Fan/Light Models are Energy Star qualified. By using highly efficient motors and lighting, Energy Star bath fans can, on average, consume 65% less energy than conventional fan or fan/light models and may qualify for local utility rebates. Learn more about Energy Star at www.energystar.gov. The performance secrets of the 8000 Series are the heavy duty galvanized housing fitted with high density acoustical insulation; a squirrel-cage blower designed for optimum performance and sound properties; and a specially designed 4” duct transition and back draft damper reduces noisy air turbulence. The high-impact styrene grille and prism glass lens on fan/light models will complement a wide range of decorating themes and its white color blends with most ceilings. FEATURES • Plug-in high efficiency motor with super-quiet double inlet blower. • New designer-styled high-impact styrene grille. • Heavy-duty galvanized housing and blower. • Four adjustable mounting bars allows for placement anywhere between 16” O.C. and 24”O.C. ceiling joists. • High-density acoustical insulation to absorb noise. • 4” duct with back draft damper reduces noisy air turbulence and comes pre-assembled to housing. • cULus listed IC for use in insulated ceilings. • cULus listed for use over a tub or shower when wired on a UL listed GFCI protected circuit. 10" 7 5/8" 11 3/ " 16 12 1/2" S MODEL BATH VENT 8060ES 8080ES 8100ES 8140ES 8090A 8100A 4 P E C I ENERGY DUCT STAR SIZE Yes Yes Yes Yes No No 4" 4" 4” 4” 4” 4” F I C ROUGH-IN OPENING 10-1/4” 10-1/4” 10-1/4” 10-1/4” 10-1/4” 10-1/4” Visit us on the web at www.marleymep.com X X X X X X 11-7/16” 11-7/16” 11-7/16” 11-7/16” 11-7/16” 11-7/16” A T AMPS 0.20 0.26 0.29 0.40 0.70 0.73 I O N 11 1/2" S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 60 80 100 140 90 100 0.5 1.0 1.5 2.5 1.0 1.5 55 75 95 130 85 95 75 95 125 175 115 125 B AT H R O O M V E N T I L AT I O N ENVIRONMENTAL SERIES Ultra Quiet Environmental Series, Lighted FEATURES • Plug-in high efficiency motor with super-quiet double inlet blower. • Fluorescent models have a patented* light compartment giving 50% more direct light from two 13-watt compact quad-tube instant start fluorescent lamps (bulbs included) • 8190LA and 8100LA feature a 100 watt lamp and night light (bulbs not included). • New designer-styled high-impact styrene grille with prism glass lens for even light distribution. • Heavy-duty galvanized housing and blower. • Four adjustable mounting bars allows for placement anywhere between 16” O.C. and 24” O.C. ceiling joists. • High-density acoustical insulation to absorb noise. • 4” duct with back draft damper reduces noisy air turbulence and comes pre-assembled to housing. • 4-watt night light on lighted models (bulb not included) • cULus listed IC for use in insulated ceilings. • cULus listed for use over a tub or shower when wired on a UL listed GFCI protected circuit. 10" 7 5/8" 11 3/16" 12 1/2" 12 1/2" * US Patent 6,939,023 Patented Light Compartment 50% more direct light - Bulbs included. (Models 8060FL, 8080FL, 8100FL, 8140FL) S P E C ENERGY DUCT LAMP MODEL STAR SIZE WATTS BATH VENT / LIGHT with Night Light 8060FL Yes 4" 26/4 8080FL Yes 4" 26/4 8100FL Yes 4” 26/4 8140FL Yes 4” 26/4 8090LA No 4” 100/7 8100LA No 4” 100/7 I F I C A T I ROUGH-IN OPENING AMPS 10-1/4 X 11-7/16 10-1/4 X 11-7/16 10-1/4 X 11-7/16 10-1/4 X 11-7/16 10-1/4”X11-7/16” 10-1/4”X11-7/16” 0.41 0.48 0.51 0.62 1.5 1.5 O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 60 80 100 140 90 100 0.5 1.0 1.5 2.5 1.0 1.5 55 75 95 130 85 95 Visit us on the web at www.marleymep.com 75 95 125 175 115 125 5 ENVIRONMENTAL SERIES Humidity Sensing Bath fans using the Aware Technology constantly monitor the humidity level of the bathroom, and turn on and off automatically. Both humidity level and time of operation are easily adjustable. 6 1 Steam from shower or 2 Bath Fan quickly removes 3 When damaging steam bath turns on fan automatically damaging steam and moisture Visit us on the web at www.marleymep.com and moisture are removed, Bath Fan turns off automatically B AT H R O O M V E N T I L AT I O N ENVIRONMENTAL SERIES FEATURES • Plug-in high efficiency motor with super-quiet double inlet blower. • Lighted models have a patented* light compartment giving 50% more direct light from two 13-watt compact quad-tube instant start fluorescent lamps (bulbs included) • New designer-styled high-impact styrene grille with prism glass lens for even light distribution. • Heavy-duty galvanized housing and blower. • Four adjustable mounting bars allows for placement anywhere between 16” O.C. and 24”O.C. ceiling joists. • High-density acoustical insulation to absorb noise. • 4” duct with back draft damper reduces noisy air turbulence and comes pre-assembled to housing. • Built-in Humidity Sensor automatically detects humidity and turns on fan. Manual override from wall switch. • 4-watt night light on lighted models (bulb not included) • cULus listed IC for use in insulated ceilings. • cULus listed for use over a tub or shower when wired on a UL listed GFCI protected circuit. • Energy Star qualified. 8100FLH 8100ESH 10" 7 5/8" 11 3/16" 12 1/2" 12 1/2" 12 1/2" 12 1/2" * US Patent 6,939,023 Patented Light Compartment 50% more direct light - Bulbs included. (Model 8100FLH) S P E C ENERGY DUCT LAMP MODEL STAR SIZE WATTS BATH VENT / LIGHT with Night Light 8100FLH Yes 4” 26/4 BATH VENT 8100ESH Yes 4” – I F I C A T I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER ROUGH-IN OPENING AMPS 10-1/4 X 11-7/16 0.51 100 1.5 95 125 10-1/4 X 11-7/16 0.29 100 1.5 95 125 Visit us on the web at www.marleymep.com 7 7000 SERIES 7100 Series Bath Fans The high-impact styrene grille will complement a wide range of decorating themes and its white color blends with the ceiling as a subtle styling addition. The computer designed air chamber provides optimum air flow and sound properties; and superquiet centrifugal blower wheel for maximum ventilation. These fans are U.L. listed and can be used over a tub or shower enclosure when installed on a GFCI protected circuit. FEATURES • Plug-in enclosed motor with super-quiet centrifugal blower wheel. • High-impact styrene grille. • 4” Duct adapter with integral back draft damper reduces air turbulence and comes pre-assembled to housing. • Computer designed air chamber for optimum air flow and sound properties. • Adjustable mounting brackets for easy installation between ceiling joists. • U.L. listed type IC for use in insulated ceilings. • Can be used in tub or shower enclosure when wired on a U.L. listed GFCI protected circuit. 10" 7 5/8" 11 3/16" 12 1/2" S MODEL BATH VENT 7100A 7150A 8 P E C I F I C A DUCT SIZE ROUGH-IN OPENING AMPS 4” 4” 10-1/4” X 11-7/16” 10-1/4” X 11-7/16” 0.70 1.7 Visit us on the web at www.marleymep.com T I O 11 1/2" N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 100 150 1.5 3.5 95 140 125 190 B AT H R O O M V E N T I L AT I O N 7000 SERIES 7100 Series Bath Fans, Lighted FEATURES • Plug-in enclosed motor with super-quiet centrifugal blower wheel. • High-impact styrene grille with snap in Lexan® lens. • Lighted models have 100 Watt lamp capacity (lamp not included). • 7 1/2 Watt night light on lighted models (lamp not included). • 4” Duct adapter with integral back draft damper reduces air turbulence and comes pre-assembled to housing. • Computer designed air chamber for optimum air flow and sound properties. • Adjustable mounting brackets for easy installation between ceiling joists. • U.L. listed type IC for use in insulated ceilings. • Can be used in tub or shower enclosure when wired on a U.L. listed GFCI protected circuit. 10" 7 5/8" 11 3/16" 12 1/2" S MODEL DUCT SIZE P E LAMP WATTS C I F I C ROUGH-IN OPENING BATH VENT / LIGHT WITH NIGHT LIGHT 7100LA 4” 100/7 10-1/4”X 11-7/16” 7150LA 4” 100/7 10-1/4”X 11-7/16” A AMPS 1.5 2.5 T I O N 12 1/2" S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 100 150 1.5 3.5 95 140 125 190 Visit us on the web at www.marleymep.com 9 6000 SERIES 6000 Series Bath Fans Marley Engineered Products 6000 Series Bath Fans are intended for use in bathrooms but can be used in other ares where ventilation is required. These models feature efficient Marley Engineered Products designed motors combined with specially designed squirrel-cage blowers. All Bath Fans are U.L. listed type I.C. (Inherently Protected) for installation in insulated ceilings and above a bathtub or shower when connected to a U.L. listed GFCI protected branch circuit. FEATURES • Low profile grille assembly • 4” round discharge with automatic back draft damper • Built-in mounting bracket • Large, easily accessible outlet box • Easy installation in new or existing ceilings • Builder Split Pack available 6060 5 3/8" 8 1/2" 81/2" 10" 10" 10" S MODEL DUCT SIZE P E C LAMP WATTS I F I ROUGH-IN OPENING C A AMPS BATH VENT 6060 4” – 8-3/4” X 8-3/4” 1.2 6080 4” – 8-3/4” X 8-3/4” 0.7 6100 4” – 8-3/4” X 8-3/4” 0.7 BUILDER SPLIT PACKS 6000X1 BUILDER SPLIT PACK - HOUSING 6 PACK 6060X2 BUILDER SPLIT PACK - FINISH PACK (1) 6080X2 BUILDER SPLIT PACK - FINISH PACK (1) 6100X2 BUILDER SPLIT PACK - FINISH PACK (1) 10 Visit us on the web at www.marleymep.com T 10" I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 60 80 110 4.0 3.0 4.0 55 75 105 60CFM VENT ONLY 80CFM VENT ONLY 110CFM VENT ONLY 75 95 135 B AT H R O O M V E N T I L AT I O N 6000 SERIES 6000 Series Bath Fans, Lighted Marley Engineered Products 6000 Series Bath Fans are intended for use in bathrooms but can be used in other ares where ventilation is required. These models feature efficient Marley Engineered Products designed motors combined with specially designed squirrel-cage blowers. All Bath Fans are U.L. listed type I.C. (Inherently Protected) for installation in insulated ceilings and above a bathtub or shower when connected to a U.L. listed GFCI protected branch circuit. FEATURES • Low profile grille assembly • Lighted models have 100 watt lamp capacity (lamp not included) • Unbreakable Lexan® lens (lighted models) snaps on and off for easy bulb replacement • 4” round discharge with automatic back draft damper • Built-in mounting bracket • Large, easily accessible outlet box • Easy installation in new or existing ceilings • Builder Split Pack available 6060RL 5 3/8" 8 1/2" 81/2" 10" 10" 10" S MODEL P DUCT SIZE E LAMP WATTS C I F I ROUGH-IN OPENING C A AMPS T I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER BATH VENT / LIGHT 6060RL 4” 100 8-3/4” X 8-3/4” 2.1 6080RL 4” 100 8-3/4” X 8-3/4” 1.7 6100RL 4” 100 8-3/4” X 8-3/4” 1.7 BUILDER SPLIT PACKS 6000X1 BUILDER SPLIT PACK - HOUSING 6 PACK 6060RLX2 BUILDER SPLIT PACK - FINISH PACK (1) 6080RLX2 BUILDER SPLIT PACK - FINISH PACK (1) 6100RLX2 BUILDER SPLIT PACK - FINISH PACK (1) 60 80 110 4.0 3.5 4.0 55 75 105 75 95 135 60CFM VENT/LIGHT 80CFM VENT/LIGHT 110CFM VENT/LIGHT Visit us on the web at www.marleymep.com 11 DECORATIVE Decorative Bath Fans These attractive ceiling units combine even, diffused lighting and quiet ventilation. A full 14 inches in diameter, this round design is pleasing in rooms where a traditionally shaped fixture is not aesthetically correct. These powerful ventilators draw mildew-building moisture from the room through a 4 inch round discharge. Model 1001 provides 100 CFM ventilation for bathrooms up to 95 sq. ft. FEATURES • Low profile round grille with Lexan® lens. • 100 Watt Lamp Capacity (Lamp not included). • 4” round duct adapter with integral back draft damper. • Adjustable mounting brackets for easy installation between ceiling joists (16” O.C. or 24” O.C.) • Plug-in light reflector assembly. • Large, easily accessible outlet box. • Low profile housing installs between 6” floor joists. 1001 S MODEL P FINISH E C I F I C A T DUCT SIZE LAMP WATTS ROUGH-IN OPENING AMPS 4” 100 12-3/4” DIA 1.65 I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER BATH VENT / LIGHT 1001 12 WHITE Visit us on the web at www.marleymep.com 100 4.5 95 125 B AT H R O O M V E N T I L AT I O N ECONOMY QUICK MOUNT BATH FANS Quick Mount Bath Fans Installation has never been easier. Models A647B and MM647B offer the ultimate combination of economy and innovation. A new patent-pending Quick-Mount installation system helps reduce labor costs. Now a bath fan installation can be done in minutes. The Quick-Mount system holds and positions the integral mounting screws on the sturdy steel housing. Simply position the housing against the ceiling joist using the stamped indicator marks and drive or screw the pre-positioned mounting screws securely. Snap-out the patented outlet box and connect the wiring. Connect the ducting and install the spring fitted grille and the job is finished. The Quick-Mount system holds and positions the integral mounting screws on the sturdy steel housing. Snap out the patented outlet box and connect the wiring. Rough in work is complete! Simply position the housing and drive the positioned mounting screws securely. Connect the ducting and install the spring fitted grill and the job is finished. Visit us on the web at www.marleymep.com 13 ECONOMY QUICK MOUNT BATH FANS Contractors will appreciate the time saving benefits of the new Patent Pending Quick Mount installation system. Builder Split Packs available. FEATURES • Patent-Pending quick mount installation system holds and positions mounting screws (included) in place while housing is being installed. • Patented “Snap-in” outlet box and reversible knock pad. • Plug-in motor with sturdy polypropylene impeller. • Pre-assembled 3” duct adapter with back draft damper. • Choice of 2-low profile spring mounted HighImpact styrene grilles. • cULus Listed IC for use in insulated ceiling. • cULus Listed for use over a tub or shower when wired on a cULus Listed GFI protected circuit. • HVI 2100 certified. • Builder split-packs (separate housing and finishing packs) available. Models A647BX1 housing pack and A647X2 or MM647X2 finish packs. A647B MM647B S MODEL P DUCT SIZE BATH VENT A647B 3” MM647B 3” BUILDER SPLIT PACKS A647BX1 BUILDER A647BMX1 BUILDER A647X2 BUILDER MM647X2 BUILDER 14 E C I F I C A ROUGH-IN OPENING AMPS 6-7/8”X7-7/8” 6-7/8”X7-7/8” .89 .89 SPLIT PACK SPLIT PACK SPLIT PACK SPLIT PACK Visit us on the web at www.marleymep.com - T I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 50 50 4.5 4.5 45 45 65 65 HOUSING 6 PACK HOUSING 6 PACK WITH METAL DUCT ADAPTER. FINISH 6 PACK (USE WITH A647BX1 OR A647BMX1) FINISH 6 PACK (USE WITH A647BX1 OR A647BMX1) B AT H R O O M V E N T I L AT I O N ECONOMY QUICK MOUNT BATH FANS Economy Bath Fans Models MM648 and MM748 offer long-lasting performance and attractive appearance at an economical price. The Bath Fans are intended for use in bathrooms, but can be used in other areas where ventilation is required. A664IC Bath Vents are compact and easy to install. The vent and light may be separately switched for vent only, light only or vent plus light operation. FEATURES MM648 & MM748 • Heavy-duty steel housing • Built-in mounting bracket and junction box • Attractive white elliptical grille • Round duct • Plug-in motor • Use with conventional wall switch or timer FEATURES A664IC • Ventilator and light combinations are compact and simple to install • Can be separately switched for vent only, light only, or vent plus light • Unbreakable Lexan® lens snaps out of the grille for easy cleaning • Attractive 9” x 10” plastic grille • 4” round duct connection and hinged back draft damper • UL listed for use in insulated ceilings S P E C I A664IC MM648 MM748 F 6 1/4" 6 3/4" 7 3/4" 12 5/16" I C 10 3/4" A T I O N S HVI CERTIFIED RATINGS MODEL DUCT SIZE BATH VENT MM648 3” MM748 4” BATH VENT / LIGHT A664IC A664ICX1 A664ICX2 LAMP WATTS ROUGH-IN OPENING AMPS CFM SONES NA NA 6-7/8” X 7-7/8” 6-7/8” X 7-7/8” .89 1.1 60 70 3.5 5.0 55 65 75 85 50 3.5 45 65 4” 100 6-7/8”X7-7/8” 1.70 BUILDER SPLIT PACK - HOUSING 6 PACK BUILDER SPLIT PACK - FINISH 6 PACK SQ. FT BATH OTHER Visit us on the web at www.marleymep.com 15 ECONOMY BATH FAN/LIGHT Compact Bath Fans MM664IC, MM667IC and MM667ICF Bath Fans are compact and easy to install. The vent and light may be separately switched for vent only, light only or vent plus light operation. The Bath Fans are intended for use in bathrooms, but can be used in other areas where ventilation is required. All models are U.L. listed Type I.C. (Inherently Protected) for installation in insulated ceilings. These units are approved for installation in the ceiling above a bathtub or shower stall only when connected to a U.L. listed GFCI protected branch circuit. FEATURES • Ventilator and light combinations are compact and simple to install • Model MM667ICF uses energy efficient 13 watt compact twin tube fluorescent lamp (not included) • Can be separately switched for vent only, light only, or vent plus light • Unbreakable Lexan® lens snaps out of the grille for easy cleaning • Attractive white elliptical grille • 4” round duct connection and hinged back draft damper • Listed for use in insulated ceilings • Builder Split Packs available 6 1/4" 6 3/4" 7 3/4" 12 5/16" S MODEL P DUCT SIZE E C LAMP WATTS I F I ROUGH-IN OPENING C A AMPS T I O 10 3/4" N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER BATH VENT / LIGHT MM667ICF MM664IC MM667IC MM664ICX2 E667ICFX1 MM667ICFX2 16 4” 13 6-7/8”X7-7/8” 1.45 70 4.0 4” 100 6-7/8” X 7-7/8” 1.7 50 4.0 4” 100 6-7/8” X 7-7/8” 1.93 70 4.0 BUILDER SPLIT PACK - FINISH 6 PACK (USE WITH A664ICX1) BUILDER SPLIT PACK - HOUSING 6 PACK BUILDER SPLIT PACK - FINISH 6 PACK Visit us on the web at www.marleymep.com 65 45 65 85 65 85 Ductless Bath Fans Models 645 and 646 ductless ventilators are perfect for applications where running duct work would be unnecessary or impractical. Easy to install these units provide an affordable alternative to ducted fans. FEATURES 645 • Air is circulated through a carbon filled, non-woven polyester filter • Replaceable filter • No ducts to install • Plug-in motor • Radial impeller for quiet operation • Integral mounting brackets for quick, simple installation • Plaster depth gauge for flush mounting • Pre-wired junction box with wiring knockouts • Use with conventional wall switch or with timer 646 Same features as Model 645 with the addition of: • Built-in light; 100 watt max (lamp not included) 645 646 S P MODEL E C FINISH I F I C A T I O N S LAMP WATTS ROUGH-IN OPENING AMPS CFM N/A 100 7-1/8”X9” 7-7/8”X7-7/8” .89 1.7 70 70 BATH VENT / LIGHT 645 646 WHITE WHITE Visit us on the web at www.marleymep.com 17 B AT H R O O M V E N T I L AT I O N DUCTLESS COMBINATION FANS Combination Bath Fans Designer elliptical grille, with integral light, blends beautifully with any décor. This “All in One” model offers light, ventilation and heat which can be operated singly, or in any combination. Models MM698WC and MM728NL include a color matched, pre-wired, single gang wall control and model MM 728NL also features a night light. Designed to accommodate installation between 2 x 6” ceiling joist, they are available in either 70 CFM or 100 CFM for ventilation and deliver 1500 watts of instant fan-forced heat. Bath Fans are intended for use in bathrooms, but can be used in other areas where ventilation is required. FEATURES • Two separate motors - one for heating and one for ventilation • MM698F uses energy efficient 13 watt compact twin tube fluorescent lamp (not included) • Heat unit delivers 1500 watts of instant heat with thermal protection • Attractive white elliptical grille • UL Listed Type IC for use in insulated ceilings • Unbreakable Lexan® lens diffuses light from maximum 100 watt lamp and model MM728NL also features a night light • All components are independent plug-in units • Adjustable mounting brackets for easy installation between ceiling joist • MM728NL & MM698-WC come with two-rocker wall switch control (single gang) • Two-toggle bath fan control • White • Wall plate not included S MODEL DUCT SIZE BATH VENT / MM698F MM698 MM698WC MM728NL MM698X1 MM698AX2 P E C LAMP WATTS F I ROUGH-IN OPENING C A AMPS LIGHT / HEATER 4” 13/7-1/2 8”X14-5/16” 13.44* 4” 100 8”X14-5/16” 13.8* 4” 100 8”X14-5/16” 13.8* 4” 100/7-1/2 8”X14-5/16” 13.8* BUILDER SPLIT PACK - HOUSING 4 PACK BUILDER SPLIT PACK - FINISH PACK (1) *INCLUDES HEATER AND VENT / LIGHT 18 I Visit us on the web at www.marleymep.com T I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 70 70 70 100 3.0 3.0 3.0 5.5 65 65 65 95 90 90 90 125 B AT H R O O M V E N T I L AT I O N INFRARED HEATERS Bulb Heaters Bulb Heaters will turn the coldest, most damp bathroom into a warm comfort zone. with instant heat. These heaters provide warmth through the use of infrared heat lamps. Model B674W uses two R-40 lamps FEATURES B674W • Instantly provides up to 750 watts of gentle heat • Uses two R-40 lamps up to 375 watts (2560 BTU) • Wired for switch, timer or single pole thermostat operation • Easy installation with mounting to either 16” or 24” O.C. joists with rigid, 4-point mounting system • Use with conventional wall switch or timer • UL Listed I.C. for insulated ceilings A564 • Up to 375 watt, R-40 infrared heat lamp provides instant warmth (lamp not included) • Inside reflective lamp surface that directs gentle heat rays downward • Spring loaded, easy-on, easy-off grille • Easy four-point mounting system installation • Junction box easy to access • Use with conventional wall switch • UL Listed I.C. for insulated ceilings B674W A564 S P MODEL E C DUCT SIZE I F I LAMP WATTS INFRARED BULB HEATER A564 N/A 375 B674W N/A 750 C A T I O N S ROUGH-IN OPENING AMPS 8-1/2”X9-1/4” 8-1/2”X14-5/16” 3.33 6.5 Visit us on the web at www.marleymep.com 19 INFRARED HEATERS Bulb Heaters / Bath Fans Bulb Heaters will turn the coldest, most damp bathroom into a warm comfort zone. with instant heat. These heaters provide warmth through the use of infrared heat lamps. Model B674W uses two R-40 lamps FEATURES B660W • 70CFM of ventilation • 4” duct adapter • Long life, permanently lubricated, shaded pole motor • Large venturi assures quiet, efficient ventilation • Uses two R-40 lamps up to 375 watts (2560 BTU) • UL Listed I.C. for insulated ceilings B560 • 70 CFM of ventilation • Spring loaded, easy-on, easy-off grille • Easy four-point mounting system installation • Junction box easy to access • Use with conventional wall switch • 4” duct adapter with back draft damper • Long life permanently lubricated motor • UL Listed I.C. for insulated ceilings • Uses one R-40 lamp up to 375 watts B660W B560 S P E C DUCT LAMP MODEL SIZE WATTS BATH VENT / BULB HEATER B560 4” 375 B660W 4” 750 20 Visit us on the web at www.marleymep.com I F I C A T ROUGH-IN OPENING AMPS 8-1/2”X9-1/4” 8-1/2”X14-5/16” 4.11 7.35 I O N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 70 70 5.5 4.0 65 65 85 85 General Home / Kitchen Fans / Utility Fans Marley Builder Products’ through the wall General ventilators provide a simple cost effective method of controlling temperature levels throughout the home. FEATURES 790L • Room-to-room ventilator equalizes temperature levels throughout the home • Especially effective in homes with fireplaces and window air conditioners • Built-in switch with solid state speed control • Plug-in motor and blade assembly for ease in installation 898L / 899L • Kitchen ventilator exhausts heat and moisture-laden air directly outside with no ductwork • Rustproof, weather-resistant exterior parts • Powerful, deep-pitched blades • Plug-in motor and blade assembly • Switch operated; use with conventional wall switch or timer • Pull-chain operated (899L) 1047 • 10” heavy-duty, through-the-wall ventilator for larger kitchens • Pull-chain operated • Positive close door 760L • Vertical discharge ceiling ventilator • Quickly exhausts contaminated air to the outdoors • Use to ventilate large areas such as workshops, utility rooms, etc. • Compact, one-piece housing with back draft damper • Adjustable mounting brackets • All steel grille • Use with conventional wall switch or timer 1080 • A larger, more powerful version of the 760L • Deep-pitch 10” blades • Vertical exhaust • Plug-in motor • Adjustable mounting tabs S P E C ROUGH-IN MODEL FINISH OPENING HOME / KITCHEN VENTILATORS 790L WHITE 9” 898L WHITE 9” 899L WHITE 9” 1047 WHITE 11” UTILITY FANS 760L WHITE 7” 1080 WHITE 11” I F I C 790L 899L 898L 1047 760L 1080 A T I O N S AMPS CFM SONES WALL THICKNESS DUCT SIZE 1.1 1.2 1.2 .90 250 200 200 460 7.0 7.0 7.0 3-1/2” TO 6-1/2” 4-1/4” TO 8” 4-1/4” TO 8” 4-1/4” TO 8-1/4” - 1.1 .90 200 280 5.5 5.5 - 9” DIA. DUCT 11” DIA. DUCT Visit us on the web at www.marleymep.com 21 B AT H R O O M V E N T I L AT I O N HOME & KITCHEN COMMERCIAL VENTILATORS TM TM Super Q Ventilators All Super Q™ commercial ventilators can be converted for either In-Line or Direct Discharge applications. SUPER PERFORMANCE RANGE • 6 models to cover ventilation requirements from the smallest baths to the largest conference rooms • Range from 101 CFM to 855 CFM (.125" S.P.) • Range from 123 CFM to 910 CFM (0.0" S.P.) SUPER QUIET VENTILATION • Large centrifugal blowers rotate slowly to generate airflow with exceptional quietness. The Super-Q ventilators operate at 1550 RPM or less. Other fans run at speeds up to 3600 RPM. • Motors float in resilient rubber mountings, eliminating vibration • Chatter proof integral backdraft damper SUPER HEAVY-DUTY CONSTRUCTION • Heavy gauge steel housing with sound absorbing, 1/2" acoustic insulation lining the housing • Permanently lubricated motor designed for continuous operation • Factory-balanced blower wheels and motors; all components tested prior to shipment SUPER FLEXIBILITY • All models can be mounted for direct discharge or converted for In-Line discharge • Models CV6, CV8, and CV10 have 2-speed motors to cover additional ventilation requirements 22 Visit us on the web at www.marleymep.com IN-LINE VENTILATION Remote power units provide high volume air movement quietly. Super Q™ Ventilators can be used throughout normal heating and air conditioning systems in homes and offices. Multiple rooms may be ventilated with high volume air movement. DIRECT DISCHARGE VENTILATION Commercial and industrial construction requires positive, high-performance ventilation. Building code requirements, the health and comfort of building occupants, and the protection of stored goods all mandate specific periodic changes of air in the following: • Public Buildings • Commercial Buildings • Institutional Buildings • High-Rise Structures • Other Residences For applications where residential grade ventilators aren’t enough, use Marley Builder Products’ specification-grade ventilators. The Super Q™ Series – super performance . . . super quiet . . . in a word – superlative. IN-LINE APPLICATIONS 1.25 1.25 CV .50 12 .4 .6 .8 1.0 .25 .2 0 1.2 12 .2 .50 CV 0 .75 CV6 CV6 .25 1.00 CV8 .75 10 CV8 1.00 STATIC PRESSURE (IN. OF W.G.) 1.50 CV 1.50 CV10 STATIC PRESSURE (IN. OF W.G.) DIRECT DISCHARGE APPLICATIONS .4 .6 .8 1.0 1.2 CU. FT. PER MIN. (THOUSANDS) CU. FT. PER MIN. (THOUSANDS) SUPER Q™ FAN PERFORMANCE MOTOR1 RPM MODEL MOTOR VOLTAGE 60 Hz A.C. MAX. WATTS INPUT FAN CAPACITY - CUBIC FEET PER MINUTE3 WEIGHT (Lbs.) CV6 Low Speed 1050 115/1 47 14 CV6 High Speed 1550 115/1 108 14 CV8 Low Speed 1050 115/1 77 20 CV8 High Speed 1550 115/1 130 20 CV10 Low Speed 1050 115/1 243 30 CV10 High Speed 1550 115/1 390 30 CV12 115/1 260 44 1050 STATIC PRESSURE 0” .125” .250” .375” .500” .625” .750” CFM4 SONES2 CFM4 SONES2 CFM4 SONES2 CFM4 SONES2 CFM4 SONES2 CFM4 SONES2 CFM4 SONES2 123 0.9 230 3.3 272 2.1 426 4.5 469 4.5 728 8.6 901 5.8 101 1.4 196 3.0 247 2.4 401 4.7 441 4.8 694 8.6 855 5.9 82 1.8 166 3.0 231 2.9 377 4.7 423 5.1 664 8.6 812 6.3 122 3.1 217 3.3 357 5.1 403 5.4 638 8.7 755 6.5 199 3.6 341 5.6 387 5.6 613 8.6 683 6.5 328 5.8 367 5.8 591 8.8 552 6.0 304 5.8 347 6.0 565 8.8 (1) RPM shown is nominal and the performance is based on actual speed of test (2) Sones ratings in accordance with AMCA Standard 301-90 (4) Performances shown include values with inlet grill, backdraft damper and outlet duct in place (3) The AMCA Certified Ratings Seal applies to air capacities only CV6, CV8, CV81, CV10, CV101 CV12 Alternate Mounting Flange Position Grill TDA Panel FAN DIMENSIONS A B C HOUSING D CV6 12.25 9.125 16 9.125 CV8 13.875 11.375 17.375 MODEL E E1 F G OUTLET H J K GRILL L X TDA PANEL Y Z 1.25 1.25 5.375 10 3.25 0.75 11 13.75 10 6 1.625 11.375 1.87 4 5.25 8 6 0.75 13.25 14.875 10 8 1.563 CV10 18 14.125 21.5 14.125 3.625 6.375 8 8 6 0.75 15.5 19.375 14 10 2 CV12 24 14.125 27.5 14.125 1 1 8 22 6 0.75 15.5 25 20 10 2 Units are shipped with motor connected for “S” (low speed) operation. Visit us on the web at www.marleymep.com 23 B AT H R O O M V E N T I L AT I O N COMMERCIAL VENTILATORS INLINE VENTILATORS Inline Ventilators Marley Engineered Products remote mounted In-Line ventilation fans are both quiet and high performance. In-line fans generate two to three times the pressure of conventional fans and provide the airflow needed to overcome system resistance caused by long duct runs and multiple in-take vents. FEATURES • Ultra quiet remote mounted. • Energy-efficient permanently lubricated motor. • Backward curved centrifugal fan. • Rated for continuous or intermittent operation. • Rated for commercial and residential applications. • HVI 2100 certified and cETLus Listed. • Accessories available separately. IF110 IF275 IF400 IF500 S MODEL IF110 IF275 IF400 IF500 24 DUCT SIZE 4" 6" 8" 10" P E C 120VAC, 60HZ (2.0 AMP MAX.) 14-19 watts 52-73 watts 103-156 watts 103-156 watts Visit us on the web at www.marleymep.com I F "A" DIM 9.7" 11.8" 13.4" 13.4" I C "B" DIM 3.9" 5.9" 7.9" 9.9" A T I O N S HVI CERTIFIED RATINGS @ 0.2 E.S.P. "C" SQ. FT DIM CFM BATH OTHER WT 8.5" 100 95 125 5.0 8.6" 230 210 290 5.5 9.0" 470 430 590 9.0 9.0" 460 420 575 9.0 Dryer Boost Kit Model IF110DK: A clothes drying system with long duct runs or multiple bends will result in longer drying time and excess wear on the dryer. Adding an auxiliary fan with an automatic pressure switch to the dryer duct system will increase airflow resulting in reduced drying time and less energy consumption. Automatic pressure switch included in kit. FEATURES • Ultra quiet remote mounted. • Energy-efficient permanently lubricated motor. • Backward curved centrifugal fan. • Rated for continuous or intermittent operation. • Rated for commercial and residential applications. • HVI 2100 certified and cETLus Listed. • Accessories available separately. S MODEL IF110DK DUCT SIZE 4" P E C I 120VAC, 60HZ (2.0 AMP MAX.) 14-19 watts F I "A" DIM 9.7" IF110DK C "B" DIM 3.9" A T I O N S HVI CERTIFIED RATINGS @ 0.2 E.S.P. "C" SQ. FT DIM CFM BATH OTHER WT 8.5" 100 95 125 5.2 Radon Mitigation Kit Model IF175RK: Specifically designed for Radon Mitigation and extremely effective for sub-slab systems, Model IF175RK is ultra quiet and is suitable for wet environments. Kit includes all hardware needed to easily connect fan to 4" PVC pipe. Kit includes: RV175 fan (qty 1), 4" x 6" Flexible Coupling (qty 2), Manometer (qty 1), System Label (qty 1) and Component Label (qty 2) and instructions. Warning: Kit should only be installed by qualified Radon Mitigators. FEATURES • Ultra quiet remote mounted. • Energy-efficient permanently lubricated motor. • Backward curved centrifugal fan. • Rated for continuous or intermittent operation. • Rated for commercial and residential applications. • HVI 2100 certified and cETLus Listed. • Accessories available separately. S DUCT MODEL SIZE IF175RK 6" P E C 120VAC, 60HZ (2.0 AMP MAX.) 49-65 watts I F "A" DIM 8.5" I IF175RK C "B" DIM 5.9" A T I O N S HVI CERTIFIED RATINGS @ 0.2 E.S.P. "C" SQ. FT DIM CFM BATH OTHER WT 9.5" 170 155 215 10.0 Visit us on the web at www.marleymep.com 25 B AT H R O O M V E N T I L AT I O N INLINE VENTILATORS FIRE RATED VENTILATORS Fire Rated Bathroom Ventilators Model 650FRD, 680FRD, and 610FRD with built-In Fire Radiation Damper, offers the ultimate combination of quiet high performance ventilation and the best protection against flame penetration and radiant heat. Marley Engineered Products fans are intended for use in bathrooms, but can be used in other areas where ventilation is required. FEATURES • Rugged, 22-gauge plated steel housing with pre-mounted 4” round steel duct fitting with built-in backdraft damper (3" on 650FRD). • Plug-in totally enclosed permanently lubricated motor • Spring-mounted white painted low-profile steel grille • Mounting brackets included for installation between ceiling joists or in drop ceilings • UL/cUL listed and HVI certified DAMPER CONSTRUCTION • 22-gauge galvanized steel frame • Pre-mounted 4” duct adapter with damper • Stainless steel closure springs • High heat, non-asbestos ceramic blanket • Replaceable 165 Fº fusible link (Others available) • UL/cUL listed ceiling firestop damper • Designed and tested in accordance with cUL Guide No. 40U18.1.1-1/2 • Up to three hours fire resistance rating S MODEL BATH VENT 650FRD 680FRD 610FRD 26 P E C I F I 7 9/16" 9 1/2" C A DUCT SIZE ROUGH-IN OPENING AMPS 3” 4” 4” 8-1/4” X 9-1/4” 8-1/4” X 9-1/4” 8-1/4” X 9-1/4” 0.76 0.35 0.60 Visit us on the web at www.marleymep.com 9 1/4" 8 1/4" T I O 10 3/8" N S HVI CERTIFIED RATINGS SQ. FT CFM SONES BATH OTHER 50 80 100 2.5 2.5 3.0 45 75 95 65 95 125 Vent Accessories From roof caps to wall caps, timers to 3-toggle controls, our large line of bath fan accessories provide all you need to assemble and connect your bath fan in perfect working order. We even provide the added convenience of purchasing single items or kits in certain configurations for simple installation. AD627A AD628A • Two-toggle bath fan control • Three-toggle bath fan control • White • White • Wall plate not included • Wall plate not included AD1114, AD1116, & AD1118 1010A &1011A • Model 1010A is a five minute timer • Model 1011A is a one-hour timer • Use with all bath fans and whole house fans • Diffusers for 4” (AD1114), 6” (AD1116) and 8” (AD1118) round ducts • Ideal for central ventilation, cooling, and heating; fully adjustable • Anti-static additives keep the diffuser dust free 1230 1222 • Line voltage cooling thermostat • Dehumidistat control • Range 60°-120°F • Use for humidity control with bath fans • 120VAC/ 7.5 Amps • 240VAC/ 3.75 Amps Visit us on the web at www.marleymep.com 27 B AT H R O O M V E N T I L AT I O N ACCESSORIES ACCESSORIES AD1102 AD1103 • Roof cap kit • Wall cap kit • Includes roof cap, 3” and 4”duct connector, 4” x 8' flexible vinyl duct and plastic clamps • Includes wall cap, 3” and 4” duct connector, 4” x 5” flexible vinyl duct and plastic clamps AD1109 • 4” x 8’ flexible aluminum duct AD1105 • Roof cap for 3” or 4” duct AD1107 • Flexible 7” x 8’ aluminum duct AD1106 • Roof cap for up to 7” duct 28 Visit us on the web at www.marleymep.com B AT H R O O M V E N T I L AT I O N ACCESSORIES 1117A 1245 • Wall cap for 3” or 4” round duct • Thermal safety cutout • Opens at 165°F 1125 IFY6 & IFY8 • Wall cap for 3-1/4” x 10” duct • Metal Y connectors for inline fans • Fits 6” (IFY6) and 8” (IFY8) round ducts IFD4, IFD6, IFD8 & IFD10 • Backdraft dampers for inline fans • Fits 4” (IFD4), 6” (IFD6), 8” (IFD8) and 10” (IFD10) round ducts Visit us on the web at www.marleymep.com 29 WHOLE HOUSE FANS Whole House Fans are engineered to cool and ventilate the entire house. Hot humid air is expelled outdoors and cool fresh air is pulled into the living areas. Airflow can be directed by opening and closing windows throughout the home. By choosing proper fan speed, your living area is quickly and economically cooled for maximum comfort. Designed for mounting on 24" or 16" O.C. joists, several models require no framing. All Whole House Fans have pull chain or wall speed controls included. A24DD • Deep venturi for quiet operation and maximum performance • Easy installation in 16” O.C. (some framing required for 24” O.C.); No joist cutting required • Four blades for maximum airflow; cools or ventilates a large home • Adjustable side panels form a plenum • Thermal overload protection for maximum safety • Three-speed direct drive motor with wall mounted control included A20DD • Ideal for today’s smaller, energyefficient homes • Extra deep housing designed for today’s deeper insulation needs • Fan housing has a steel telescoping sleeve, eliminating wood framing • Dynamically balanced aluminum blades • Handy three-speed pull chain switch • Permanent split capacitor motor • All steel housing with baked enamel finish S MODEL A20DD A24DD 30 CFM 3400 5500 P E RPM 1050 1065 C I F AMPS 3.0 5.1 Visit us on the web at www.marleymep.com I C SHUTTER SIZE 24”x28” 30-1/4”x33” A T I O OPENING 22”x26” 30-1/2”x33-1/2” N • Direct drive for consistent, low maintenance operation • Equipped with shutter S CLEAR CEILING SPACE REQUIRED 24”x28” 34”x36” 2438, 3038R & 3638R • Three-speed control allows speed selection under all conditions; wall control included • Adjustable side panels permit 30” fan to be mounted on 16” O.C. ceiling joists • Heavy-duty construction with cold formed, channel steel frame and housing S CATALOG NUMBER 2438 3038R 3638R P E BLADE SIZE 24” 30” 36” C I F I C 0.1 S.P. CFM @ RPM 120V 3900 @ 745 5500 @ 545 7100 @ 430 AMPS 5.5 5.5 7.0 A T I O N • Detachable motor, blade and frame assembly • Dynamically balanced four-petal blades for quiet operation • Two ball bearing, pillow blocks mounted in live rubber for quiet operation • 3038R and 3638R are reversible • Belt drive for quiet, efficient performance S MINIMUM EXHAUST AREA 5.2 sq. ft. 7.3 sq. ft. 9.5 sq. ft. OVERALL SIZE 27-3/4”x27-3/4”x17” 33-3/4”x33-3/4”x17” 39-3/4”x39-3/4”x17” HORIZONTAL / VERTICAL AUTOMATIC SHUTTER • Each louver is weather-stripped to prevent air infiltration • Automatic shutters for trouble-free service • Heavy-duty frames • Weather-resistant, bronze bearings to ensure long service S CATALOG NUMBER 3124 3130 3136 3224 3230 3236 P E USED WITH 2037/2438 3038R 3638R 2438 3038R 3638R C I F I FAN INSTALLATION VERTICAL VERTICAL VERTICAL HORIZONTAL HORIZONTAL HORIZONTAL C A T I TYPE OF FINISH ALUMINUM ALUMINUM ALUMINUM WHITE WHITE WHITE O N S OPENING REQUIRED 24”X24” 30”X30” 36”X36” 24”X24” 30”X30” 36”X36” OVERALL SIZE 27-1/8”X27-1/8” 33-1/8”X33-1/8” 39-1/4”X39-1/4” 26”X26” 32”X32” 38”X38” HORIZONTAL AUTOMATIC SHUTTER • No need to cut joists - two independent louver sets open inside 16" O.C. joist space • Painted aluminum louvers with weather stripping for tight sealing closure • Connecting tie rod and adjustable spring counter balance for reliable opening • Sturdy frame S CATALOG NUMBER A3024 P E C I F I USED FAN WITH INSTALLATION 3038R, A24DD Horizontal C A T TYPE OF FINISH White I O N OPENING REQUIRED 30”x33-1/2” S OVERALL SIZE 32”x36” Visit us on the web at www.marleymep.com 31 B AT W H OHLREO H OO MUVSEEN&T IAT L AT T IIC O NV E N T I L AT O R S WHOLE HOUSE FANS ATTIC VENTILATORS Roof and Gable Vents Air in attic spaces can reach 150°F or more. This hot air penetrates downward into living space and the air conditioner strains to sufficiently cool the home. Energy costs drastically increase as the air conditioner runs almost nonstop. With a Marley Builder Products Roof or Gable Vent, attic air can be regulated to within 10° of the outside air temperature. Your air conditioner cools the home easier and saves you money even during the hottest part of summer. RV16 • Self-flashing mounting plate for easy weather-tight installation • Our most powerful ventilator for use in the largest homes • Ventilates 2320 square feet of attic area with 780 square inches of intake area • Low-silhouette dome is unobtrusive and blends into any roof design • 27” x 27” mounting plate; aluminum dome • Bug and bird screen protects against annoying pests • Pre-wired junction box with attached flexible conduit • 3” high venturi prevents intrusion of rain, snow and wind • Includes adjustable range thermostat (60˚ to 120˚F) • Dynamically balanced direct drive motor and blade combinations ASRV14 • Specifically designed for smaller homes • Unobtrusive low-silhouette dome blends into any roof design • 14” blades ventilate up to 1515 square feet of attic area with 480 square inches of intake area • Bug and bird screen protects against annoying pests • Aluminum Dome. 23” x 23” mounting plate • 3” high venturi prevents intrusion of rain, snow and wind • Unit mounted, integral junction box and automatic thermostat turns on at 105°F off 95° F • Dynamically balanced direct drive motor and blade combinations • Self-flashing mounting plate for easy weather-tight installation AGV14 & GV16 • Easy to install in existing homes or new construction • AGV14 gable ventilator designed for average-sized homes • Optional mounting-exhaust hot air or pull in cool air • GV16 gable ventilator designed for large homes • Mounting brackets included • AGV14 includes pre-wired automatic thermostat mounted in junction box turns on at 105°F off 95° F • 14” blade on AGV14; 16” blade on GV16 • 18” armored, flexible cable supplied with GV16 • GV16 includes adjustable range thermostat (60° to 120°F) • Heavy-duty steel construction S CATALOG NUMBER RV16 ASRV14 AGV14 GV16 32 P E C I F HVI CERTIFIED RATINGS CFM STATIC PRESSURE 1620 .03 1060 .03 1040 .03 1520 .03 Visit us on the web at www.marleymep.com I C A T BLADE DIA. 16” 14” 14” 16” I VOLTS 120 120 120 120 O N AMPS 3.4 2.2 2.2 3.4 S RPM 1025 1550 1550 1100 SHIP WT. 23 17 10 18.5 B AT W H OHLREO H OO MUVSEEN&T IAT L AT T IIC O NV E N T I L AT O R S COMMERCIAL WALL FANS BE • 115V, 1Ø, permanently lubricated, drip proof motor • Permanently lubricated bearings on blade shaft • Aluminum blade • Hot dipped galvanized venturi • Shipped fully assembled • 1 Year Limited Warranty • (Sleeve bearings on 24”, 30”, 36”, Ball bearing on 42”.) S CATALOG NUMBER BE 24 BE 30 BE 36 BE 42 P E BLADE SIZE 24” 30” 36” 42” C I F I MOTOR HP 1/2 1/2 1/2 3/4 C A T I CFM (FREE AIR) 6500 8300 10400 14000 O N S SHIP WT. (LBS.) 58 65 78 92 AMPS 6.0 6.0 6.0 9.2 LPE & LPEV • LPE V - Venturi mounted fan - Provides optimum air flow and more rigid installation. Can be used with or without external shutter. • LPE S - Shutter mounted fan - Reduces installation time by eliminating inside and outside framing when a shutter is going to be used. S CATALOG NUMBER LPE 12V LPE 16V LPE 22V LPE 12S LPE 16S LPE 24S LPE 30S P E C I BLADE SIZE 12” 16” 22” 12” 16” 24” 30” TYPE VENTURI FAN SHUTTER FAN F I C OUTSIDE DIMENSION 17-3/4” SQ. 21” SQ. 27-1/2” SQ. 15” SQ. 19” SQ. 27” SQ. 33” SQ. A T I O N AMPS@ CFM @ 115V HIGH MED LOW 2000 / 1600 / 1150 3000 / 2650 / 2250 4200 / - / 3700 2000 / 1600 / 1150 3000 / 2650 / 2250 5000 / - / 4200 7800 / - /6600 S AMPS (HIGH) 1.1 1.1 2.1 1.1 1.1 2.2 2.5 SHIP WT. (LBS.) 14 21 37 16 25 44 51 COMMERCIAL WALL SHUTTER • For use with BE fans • Air open - Gravity close • All aluminum • Bronze bearings • Weather stripping for tighter seal S MODEL CWS12 CWS16 CWS22 CWS24 CWS30 CWS36 CWS42 P FAN SIZE 12” 16” 22” 24” 30” 36” 42” E C I ROUGH OPENING 13” X 13” 17” X 17” 23” X 23” 25” X 25” 31” X 31” 37” X 37’ 43” X 43” F I C A T OVERALL SIZE 15” X 15” 19” X 19” 25” X 25” 27” X 27” 33” X 33” 39” X 39” 45” X 45” I O N S SHIP WT. (LBS.) 4 6 8 11 12 20 29 Visit us on the web at www.marleymep.com 33 LOW PROFILE AIR CURTAINS Contemporary Design For use as a Thermal Barrier in retail customer entrances, malls, stores, hospitals, post offices, restaurants, concession windows and walk-in coolers. APPLICATION GUIDELINES: • Create an “open door” atmosphere in retail establishments. • For mounting heights of 7 ft. for exterior customer entrances or 8 ft. interior doors. • Reduce infiltration of exterior air, fumes, dust and dirt. • Act as a temperature separation device, repelling outside air while maintaining interior environment. • Patented design allows for continuous mounting. FEATURES • Modern contemporary design with choice of electro-static powder paint or quality stainless steel. • Cross-flow blower wheels for maximum outlet uniformity • Easily adjustable air directional vanes. • Two speed motor with convenient selector switch • Pre-wired 48 inch molded cord/plug for simple installation. • Quick-Mount mounting plate included. No Template required to locate mounting screws • Units can be installed in series for side by side continuous mounting. NOZZLE MODEL WIDTH (IN) Contemporary Powder Paint MLP36001115GR 36 MLP42001110GR 42 MLP48001108GR 48 MLP60001108GR 60 MLP36001208GR 36 MLP42001208GR 42 MLP48001206GR 48 MLP60001206GR 60 Contemporary Stainless Steel MLP36001115GRSS 36 MLP42001110GRSS 42 MLP48001108GRSS 48 MLP60001108GRSS 60 MLP36001208GRSS 36 MLP42001208GRSS 42 MLP48001206GRSS 48 MLP60001206GRSS 60 34 VOLTS AMPS MAX VEL FPM 120 120 120 120 240 240 240 240 1.3 1.6 2.1 2.1 0.7 0.7 1.0 1.0 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 / / / / / / / / 120 120 120 120 240 240 240 240 1.3 1.6 2.1 2.1 0.7 0.7 1.0 1.0 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 / / / / / / / / Visit us on the web at www.marleymep.com AVG VEL FPM AIRFLOW CFM WT. LBS MOTORS HP 1350 1350 1350 1350 1350 1350 1350 1350 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 32 37 42 53 32 37 42 53 1 @ 1/15 1 @ 1/10 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/6 1 @ 1/6 1350 1350 1350 1350 1350 1350 1350 1350 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 32 37 42 53 32 37 42 53 1 @ 1/15 1 @ 1/10 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/6 1 @ 1/6 P IRRO C A DUR C TA T CI N AT SEGORY LOW PROFILE AIR CURTAINS Architectural Design For use as a Thermal Barrier in retail customer entrances, malls, stores, hospitals, post offices, restaurants, concession windows and walk-in coolers. APPLICATION GUIDELINES: • Create an “open door” atmosphere in retail establishments. • For mounting heights of 7 ft. for exterior customer entrances or 8 ft. interior doors. • Reduce infiltration of exterior air, fumes, dust and dirt. • Act as a temperature separation device, repelling outside air while maintaining interior environment. • Patented design allows for continuous mounting. FEATURES • Extruded anodized aluminum design that compliments store interiors and public facilities. • Custom paint to accent architectural sill-height heaters in vestibules and reception areas. • Cross-flow blower wheels for maximum outlet uniformity • Easily adjustable air directional vanes. • Two speed motor with convenient selector switch • Pre-wired 48 inch molded cord/plug for simple installation. • Quick-Mount mounting plate included. No Template required to locate mounting screws • Units can be installed in series for side by side continuous mounting. • Custom paint to accent architectural sill-height heaters in vestibules and reception areas. NOZZLE MODEL WIDTH (IN) Architectural Series MLP36001115GA 36 MLP42001110GA 42 MLP48001108GA 48 MLP60001108GA 60 MLP36001208GA 36 MLP42001208GA 42 MLP48001206GA 48 MLP60001206GA 60 VOLTS AMPS MAX VEL FPM 120 120 120 120 240 240 240 240 1.3 1.6 2.1 2.1 0.7 0.7 1.0 1.0 1800 1800 1800 1800 1800 1800 1800 1800 ACCESSORIES AND CONTROLS Door Switches AVG VEL FPM 1800 1800 1800 1800 1800 1800 1800 1800 / / / / / / / / 1350 1350 1350 1350 1350 1350 1350 1350 AIRFLOW CFM WT. LBS MOTORS HP 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 1200 / 900 1380 / 1040 1600 / 1210 2060 / 1550 32 37 42 53 32 37 42 53 1 @ 1/15 1 @ 1/10 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/8 1 @ 1/6 1 @ 1/6 C1200R 20 AMP For use with all air curtains for instant activation or de-activation of unit upon door opening or closing. • Automatic switches available for all models. • Plunger Style for hinged doors or Roller Style for sliding and track doors. STYLE VOLTAGE MODEL C1200R Plunger/Roller 120 MAX AMPS SHIP WT. 20 1 lb Visit us on the web at www.marleymep.com 35 DOOR CHIMES Door Chimes & Push Buttons The understated beauty of Marley Builder Products’ Chimes lies beneath the exterior decor, as bells ring clear and pleasing throughout the home. All door chimes stand the test of time, for years of reliable, trouble-free operation with timeless good looks. In addition to door chimes, we also offer Door Chime Kits, Wireless Chimes, and Pushbuttons. SYLVAN GLACIER BRISTOL C8214 • Built-in chime blends with surrounding decor C8347R C8807R • Contemporary look • Bold geometric plane • Recessed housing with flushmounted louver grille • Cover can be painted or wallpapered to match any home interior • Full bodied sound presented in contemporary white • Can be painted to match wall color scheme • Easily recessed in existing walls or surface mounted • Two notes front; one note rear • Size: 5-3/4” x 7-5/8” grille; rough in opening 4-7/8” x 6-7/8” • Two notes front; one note rear • Size: 8-1/4” x 5-1/2” • Size: Grille - 8” x 8”; rough-in opening - 6-3/8” x 6 3/8” ECONOMY C8050R C8081R C8054R Slimline Slimline Non-Lighted, Lighted, White White Round Lighted, Brass Rim DOOR SENTRY C8055R C8930R Round Lighted, Nickel Rim • Transmitter mounts to any door; signals remote receiver announcing an entry • No wiring; receiver plugs into any outlet • Select from four melodies or two tones 36 Visit us on the web at www.marleymep.com • 32 privacy codes DOOR CHIMES CHIME KITS CHIME KIT CHIME KIT C8379 C8279 • Up-scale double-entry builder kit • Double-entry kit • Resonator chamber for improved sound • Includes transformer and two lighted pushbuttons • Includes transformer and two lighted brass finish pushbuttons • 6-3/8” x 5” x 2” C8276 • Single-entry kit • Includes transformer and one lighted pushbutton BELLS & BUZZERS & ACCESSORIES BUZZERS C8212R1 • Buzzer; 2-1/2” x 2-7/8” x 1” TRANSFORMER TRANSFORMER C8116R C8136R •BLISTER PACK • Plastic 15 watt, 16 volt; for four - eight note chimes • 10 watt, 16 volt • Recommended for two-note chimes and general purpose C8138R • Plastic 15 watt, 24 volt; for multiple chime installations Visit us on the web at www.marleymep.com 37 ELECTRIC HEAT Electric Heat Whether it’s for primary or secondary use, Marley Builder Products has an electric heat source for you. Many models can be utilized in both residential and commercial settings, with maximum comfort and minimum operating costs. Where heat is needed, Marley Builder Products has an application for you: • Baseboard Heat - The quietest, highest quality baseboard heat available. • Convection Heat - Either wall or ceiling mounted, wherever there’s a need for instant heat. • Wall Heaters - For vestibules, hallways, small and large baths, placed in any size room. Marley Builder Products offers electric wall heat in several voltages and wattages to provide even, efficient warmth. • Ceiling Heaters - When wall space is scarce, ceiling heaters provide the same efficient warmth as our wall heaters. Available in colors of white and almond to complement any room interior, Marley Builder Products also provides the necessary accessories, including thermostats and surface mount kits, becoming your complete source for electric heat. 2500 - ELECTRIC BASEBOARD HEATERS • Easily installed without disassembly • Designed for quiet operation... no popping and pinging normally associated with baseboard heaters. • Lead wires allow quick field connection to either end of the heater. • Continuous capillary tube safety thermal cutout protection in case of airflow blockage. • Easy out knockouts at each end for convenient wiring. • Chimney fin element design for maximum air circulation. Airflow is directed away from walls to help prevent wall soiling. • UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. • *Navajo White enamel finish retains attractive appearance and is compatible with all interior decors. • Pre-notched mounting guide marks for fast and easy installation without disassembling the unit. • Built-in cable clamp in both wiring compartments to restrain incoming cables without using additional hardware. • Permanently attached copper grounding wire in each wiring compartment. S P E C I F I C A T I O N S STANDARD DENSITY - 250 WATTS PER FOOT MODEL 240 VOLT 120VOLT WATTS BTU/HR. LENGTH 2542W 2512W 400 1365 2’ 25426W 25126W 500 1706 2’6” 2543W 2513W 750 3412 3’ 2544W 2514W 1000 3412 4’ 2545W 2515W 1250 4265 5’ 2546W 2516W 1500 5118 6’ 2548W 2000 6824 8’ 25408W 2500 8530 8’ 38 Visit us on the web at www.marleymep.com A C C E S S O R I E S MODEL TA1AW TA2AW RA1W DSW2W PR24 DESCRIPTION Baseboard Thermostat, SP 22 Ampere, 40º to 100ºF Baseboard Thermostat, DP 22 Ampere, 40º to 100ºF. Duplex Receptacle. Double Pole Disconnect Switch Rated 20A @ 120-277ºF. 24 Volt AC, Class 2 Power Relay SPST 30A @ 120-240 VAC, 23A @ 277 VAC High Altitude Baseboard Heater (mounted above 7500 Ft.) , add suffix “H” to catalog number NOTE: Eight foot length baseboards must be ordered in multiples of two pieces for shipment. * Add NW suffix for Northern White color. E L E C T R I C H E AT ELECTRIC HEAT HBB - ELECTRIC HYDRONIC BASEBOARD HEATERS A sheathed electric heating element is totally immersed in a heat-transfer liquid and sealed in a heater-length copper tube. The large diameter reservoir maximizes the volume of heat storage to prolong the thermal constant of the entire heater. All available heat is delivered into the room with strong convection flow. Gentle heat keeps radiating even after the thermostat turns off because of the hydronic elements retention qualities. QUALITY INSIDE AND OUT. Heavy-duty welded steel louvered grilles discourage insertion of foreign objects and direct heat outward into the room. Designer-style junction boxes are made of high-strength Lexan® to resist scratches and wear marks. Corrosion resistant aluminum fins are pressure-fitted to copper tubing to assure rapid heat transfer and air flow. Built-in thermal cut-off automatically shuts down the heater should any overheating occur. GO-ANYWHERE DESIGN. The entire unit mounts flush to any wall and flat on any floor - wood, carpet or tile. The trim, three-inch thick functional design and low operating temperatures allow carpeting to be installed up to and around the baseboard. Efficient air flow is achieved even if the unit is mounted above the floor. S P E C I F I C A T I O N S MODEL HBB500 HBB504 HBB750 HBB754 HBB1000 HBB1004 HBB1250 HBB1254 HBB1500 HBB1504 HBB2004 VOLTS 120 240/208 120 240/208 120 240/208 120 240/208 120 240/208 240/208 WATTS 500 500/375 750 750/563 1000 1000/750 1250 1250/938 1500 1500/1125 2000/1500 BTU/HR. 1706 1706/1280 2560 2560/1921 3413 3413/2560 4265 4265/3200 5120 5120/3839 6826/5120 AMPS 4.2 2.1/1.8 6.3 3.1/2.7 8.3 4.2/3.6 10.4 5.2/4.5 12.5 6.3/5.4 8.3/7.2 LENGTH SHIP WT. (LBS.) 28” 10 34” 12 46” 15 58” 19 70” 94” 22 30 A C C E S S O R I E S MODEL HBBT1 DESCRIPTION 25 AMP @ 120-277 VAC Single Pole Thermostat Snap Action Type. Field Installed in Junction Box. HBBT2 25 AMP @ 120-277 VAC Double Pole Thermostat Snap Action Type. Field Installed in Junction Box. HBBAC* Air Conditioner Outlet Section. 20 AMP @ 208-240 VAC. HBBDR* Duplex Receptacle Section. 15 AMP @ 120 VAC. HBBDSDR120* Two pole disconnect switch with 120 VAC receptacle HBBLVR0* Low Voltage Relay Control Section. 25 AMP @ 120 VAC. HBBWS* 8” Wiring Sections. * These accessories are mounted in 8” control box that add length to baseboard. Visit us on the web at www.marleymep.com 39 ELECTRIC HEAT HT SMART SERIES - PROGRAMMABLE WALL HEATER Fast heat response and Programmable touch screen built-in thermostat make the Smart Series™ heaters ideal for dens, basements, converted attics and breezeways, garages, large bathrooms, offices, workshops and similar areas. Also, adaptable to multiple installations in larger or odd shaped rooms. • Heater automatically adjusts wattage output and blower speed resulting in whisper quiet operation for optimum comfort. • Heating element is heavy duty non-glowing steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area. • Built-in fan delay operates when unit is turned off after heating to prolong element life. • 5/2 day electronic programmable built-in thermostat adaptable to fit any life style while providing energy savings and precise temperature performance. • Easy to use LED touch screen operation. • Convenient remote control included. • Contemporary, clean design with night light feature complements any decor. • Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment. • This heater is designed for installation in 2 x 4 or larger wall sections using the wall box provided. • The heater may be wired with standard building wire (60°C). Refer to specification chart for correct supply voltage and wire size. TM S P E C I F I C A T I O N S MODEL HT2024SS HT1502SS VOLTS 240 120 AMPS 1.0 - 8.3 1.6 - 12.5 WATTS 250 - 2000 200 - 1500 BTU/HR 853 - 6826 682 - 5120 THERMOSTAT DISPLAY Time Periods 1 = Wake up period 2 = Daytime period 3 = Evening Period 4 = Sleep Time Days of week Group 1 (Mon to Fri) Group 2 (Sat & Sun) HEATER REMOTE An easy to use remote control is included to provide convenient heat and power adjustment from up to 12 feet away. Time of day This area is also used when programming custom periods Centigrade Setting Ambient temperature Fahrenheit Setting Fan operation Automatic Mode Hold function Tamper proof setting Proportional heat control indicator Night light indicator BACK BOX (Rough-in Box) (Front View) Down button Up button 12” On / Off button Mode button Visit us on the web at www.marleymep.com 13-11/16” 1" 12” (End View) 40 19-9/16” 17-7/16” FRONT COVER (Side View) 3-3/4” E L E C T R I C H E AT ELECTRIC HEAT ECP - EURO STYLE WALL HEATERS, NON-FAN FORCED • Polyester powder painted grille offers attractive appearance in a neutral color that is compatible with any decor. • Convection and radiant warmth from one heater. • Contemporary styling uses soft curves on all edges, avoiding the sharp corners of a square design. • Heater can be surface mounted or recessed into 2x4 or larger wall sections. It is designed to fit between 16’ O.C. studs. • Steel finned metal sheath electric heating elements provides uniform heat and long service life. • Large wiring compartment is accessible from the front of the heater enabling rapid, easy hookup. • CSA and UL approved. • Closely spaced bar grille design discourages insertion of foreign objects and directs air outward to effectively distribute heat to the middle of the room. S P E C I F I C A T I O N S MODEL ECP1024 ECP1524 VOLTS 240/208 240/208 PHASE 1 1 WATTS 1000/750 1500/1125 AMPS 4.0/3.6 6.3/5.4 SHIP WT. (LBS.) 27 27 • Use Model 414 Surface Kit when mounting directly to wall. 1235 - ECONOMY WALL HEATERS • Heater can be recessed surface mounted, horizontal or vertical mounted. • Exclusive fan venturi design for quiet operation. • Clean electric heat requires no ducting or venting. • Front mounted thermostat for convenient room comfort control. • Attractive safety grille removes easily for cleaning. • Built-in manual reset thermal safety switch to prevent overheating. • Rugged, two-piece construction; easy to install. S P E C I F I C A T I O N S MODEL 1235 1235P 2435 2435P FINISH Stainless Almond Stainless Almond ROUGH-IN OPENING 9-1/4” x14-1/2” 9-1/4” x 14-1/2” 9-1/4” x 14-1/2” 9-1/4” x 14-1/2” WATTS 1500 1500 1500/1125 1500/1125 AMPS 12.5 12.5 6.2/5.4 6.2/5.4 VOLTS 120 120 240/208 240/208 BTUH 5120 5120 5120/3839 5120/3839 SURFACE FRAMES Adapter frames for surface mounting • 414 - Use with 1235 Visit us on the web at www.marleymep.com 41 THERMOSTATS Digital Electronic Thermostats Digital thermostats are an ecological alternative to mercury filled thermostats. Marley Builder Products offers several models. All models feature a digital display with backlight feature. Models with set back features are available. T8775C1005 • 24 Volt low voltage digital round thermostat 2 wire (Heat & Cool). • Easily adjust temperature with the control ring. • Lighted display, turns on with the touch of a button. TH5220D1003 • 24 Volt 2-Stage digital thermostat 5-7 wire (Heat & Cool). S P E C I F I C A T I O N S MODEL T8775C1005 TH5220D1003 RUNNING CURRENT @ 30V .015 - 1.0A .015 - 1.0A VOLTAGE 24 24 TEMP. RANGE 40ºF - 90ºF 40ºF - 90ºF TH110DPP • Accurate in maintaining selected temperature up to +/- 1-1/2˚F. • Choice of Celsius or Fahrenheit; choice of 12 or 24 hour readouts. • Protected memory, no battery required. • Easy programming- 4 settings per day, each day can be different. • Manual mode override option. • 240 Volt operation. S P E C I F I C A T I O N S MODEL TH110DPP TYPE DPST AMPS 16.7A @ 240V POSITIVE OFF Yes TEMP. RANGE 44ºF - 86ºF TH300024 • Ultimate temperature control the most accurate type of thermostat on the market (±0.15°C / 0.27°F) • On-screen heating power indicator gives at-a-glance verification of power being used • 2-wire non-polarized connection means fast, hassle-free installation • Up/Down buttons enable easy temperature setting • Also ideal for radiant ceilings • Battery-free backup means no re-programming thermostat after power outage • Silent operation • Can be used on baseboards, convectors, and radiant panels S P E C I F I C A T I O N S MODEL TH300024 42 TYPE TRIAC AMPS SPST 120V OR 240V, 12.5A Visit us on the web at www.marleymep.com POSITIVE OFF Yes TEMP. RANGE 40ºF - 85ºF E L E C T R I C H E AT COMMERCIAL CEILING FANS Commercial Ceiling Fans • 18 Pole 115V; Motor • Permanently sealed double ball bearing motor • 3/8” x 7-1/4” locking J-hook for installation • White epoxy finish • Steel blades S P E C I F I C A T I O N S MODEL CPF56 56HRCF VOLTS 120 120 AMPS 0.85 0.70 BLADE SIZE 56” 56” CFM/RPM 24000/300 19800/280 SHIP WT. (LBS.) 24 20 COLOR White White SPEED CONTROLS 9290R 9290DS, 9290DS2, 9290DS5 558P S P E C I F I C A T I O N S MODEL 9290R 9290DS 9290DS2 9290DS5 558P DESCRIPTION Controls one fan. Four-speed rotary control without plate. Ivory and white knob included. Controls one fan. Three-speed slide control with white face plate. Controls two fans. Three-speed slide control with white face plate. Controls three to five fans. Three-speed slide control with white face plate. Wall control unit, eight amps Note: Remote Controlled Fans do not require speed controls. MEDALLION LEVELS GOLD - Limited 3 year warranty on element or motor. PLATINUM - Limited 5 year warranty on element or motor. Limited Warranty All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of original installation or 18 months from date of manufacture, except special components which are warranted against defects in workmanship and materials (see installation manual for specific warranties) from date of installation.This warranty does not apply to damage from accident, misuse or alteration; nor where the connected voltage is more than 5% above the name plates voltage; nor to equipment improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the installation or purchase. The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products. If the product requires replacement, but an identical model is no longer available, Marley Engineered Products will select a comparable item. The above warranties are in lieu of all other warranties expressed or implied and all implied warranties of merchantability and fitness for a particular purpose which exceed the aforesaid expressed warranties are hereby disclaimed and excluded from this agreement. Marley Engineered Products shall not be liable for consequential damages arising with respect to the product, whether based upon negligence, tort, strict liability or contract. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all numbers shown on the products. We are committed to producing the highest quality products and services to our customers through the continuous pursuit of excellence in all that we do. Visit us on the web at www.marleymep.com 43 www.marleymep.com ZGC-MBPGC 9/12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2012:10:22 09:07:11-04:00 Modify Date : 2012:10:22 09:07:11-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.5.2 (Windows) Format : application/pdf Title : untitled Document ID : uuid:9a00d399-7fd8-4f04-a15b-8bc158695df1 Instance ID : uuid:493d7455-90b9-4533-b709-0b81ff7c4e7e Page Count : 44EXIF Metadata provided by EXIF.tools