556010
2016-12-28
: Pdf 556010 556010 msds
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
556010 Safety Data Sheet 29 CFR 1910.1200 Section 1: Company and Product Identification Product Name: ORCON Hot Melt Seaming Tapes Product Code: K10, K-20, XK30, K40, XK50, XU90 SUPER3S, CT7DS, SUPER3DS Company: Halex Corporation 4200 E. Santa Ana Street Ontario, CA 91761 PH: 313-555-9865 Emergency Response: 909-622-3537 Section 2: Hazards Identification GHS07 BLANK BLANK BLANK Hazard Pictograms: Signal Word: Hazard Category: Hazard Statements: Precautionary Statements: Hazards not otherwise classified: Section 3: Section 4: Warning None per OSHA Regulaitons: 29CFR1910.1200 None per SARA Tile III, Section 313 and TCA 40 CRF 372 This material under normal conditions of use is not expected to pose any physical hazards or health risks. The component exposure limits and other information in this document are provided for circumstances such as overheating, burning, or exposure to heated materials. P202: Do not handle until all safety precautions have been read and understood P281: Use personal protective equipment as required P501: Dispose of contents/container in accordance with local/regional/national/international rules. Contains no ingredients considered hazardous as defined by the Occupational Healt & Safety Administration (OSHA) in the hazzard communication standard (29 CFR 1910.1200). Contains a blend of trade secret resins and modifying agents for which there are no OSHA or equivalent exposure standards. Composition / Information on Ingredients Hazardous substance (name) Hazard Category None NA CAS# Weight % NA First Aid Measures General Info: Product may give off vapors in appreciable quantities affecting the inhalation route. Ensure proper ventilation. Notable Exposure Product is supplied in the form of a solid paper tape coated with solid adhesive. Like any organic material it may release symptoms: toxic fumes and gasses, including carbon monoxide when burned or smoldered in air. Molten adhesive can adhere to skin and may cause severe burns upon contact. If ingested: Material is non toxic. Accidental ingestion of small pieces is not likely to cause harm, but larger pieces of materials may pose a choking hazard to small children or pets. US-SDS 1 of 4 5/30/2015 If inhaled: When heated above its melting point such that smoke is generated, this product may release carbon monoxide. Eye contact: No effects anticipated. Skin contact: Can burn skin on contact with molten material. Chronic Effects: No chronic effects known. Contains no ingredient listed as a carcinogen by IARC, NTP or OSHA. Section 5: Fire Fighting Measures General Info: Keep personnel removed from and upwind of fire. Wear full body protective clothing and MSHA/NIOSH approved selfcontained breathing apparatus. All components have a flash point greater than 200C. Extinguishing Carbon dioxide (CO2), dry chemical, foam. Firefighters should wear self-contained breathing apparatus (SCBA) and full Method / Equipment: protective equipment. Hazardous Constituents associated with burning / combustion are to be considered toxic. Decomposition Info: Section 6: Accidental Release Measures Personal precautions, Not Applicable protective equipment and procedures: Containment Not Applicable Equipment and Procedures: Cleanup Procedures: Gather spilled materials and placed in a cotainer for disposal. Section 7: Handling and Storage Safe Handling Use caution and industry recognized protective equipment/clothing when working with molten adhesive. Turn off heated Precautions: application tool when not in use. Recommendations for Store in cool area in product container away from sources of ignition or flame. Storage: Incompatibilities: None Known Section 8: Exposure Control / Personal Protection General / Local exhaust ventilation should be utilized to control vapors / substances below exposure limits. Engineering Controls: Work Clothing: Protective work clothing which covers skin and prevents exposures. Eye/face protection: Wear safety goggles or face shield. Skin Protection: General purpose cotton or leather gloves may be worn durring application to prevent burns. Respiratory Should not be required. Consult an industrial hygenist if user notice respiratory problems. Protection: Additional Keep a source of cool, clean water available at worksite for burn treatment. Information: US-SDS 2 of 4 5/30/2015 Section 9: Substances with Exposure Limits CAS# None NA ACGIH-TLV OSHA-PEL NA NA Physical and Chemical Properties State: Solid Color: AMBER/ CLEAR Sp Grav: 0.9 Evaporation rate: Upper Flam Limits: Not avail VOC Content (lbs/gal): Melting Point: 60-90C. Boiling 350-400F Point/Range: (159-170C) Odor: aromatic, solvent Flash Point: >250C. Lower Flam Not avail Limits: Viscosity: Freezing Not avail Point: pH Not avail Water Insoluble Solubility: Part. Coeff (n- Not avail octanol/water Vapor Pressure: Autoignition 250 C Temp: Section 10: Stability and Reactivity General: This product s stable under nornmal conditions of temperature or pressure. Hazardous polymerization will not occur. Incompatible with strong oxidizers. May produce hazardous quantities carbon monoxide and smoke when burned. Incompatible Strong oxidizing agents, strong acids. materials: Decomposition No decomposition products known. Toxic substances may be released in the event of a fire. products: Section 11: Toxicological Information General Information: May cause slight irritation to the respiratory system while inhaling the dust or smoke. Toxicological No toxicological data is available for this product. Product components are non-toxic as defined by the Federal Hazardous Information Substances Act, 16 CFR 1500.3. (product): Likely Routes of Inhalation of vapors. Exposure: Toxicological Information (contained substances) Hazardous substance (name) LD50 Oral LD50 Dermal LC50 Inh Irritancy: None NA NA NA NA Carcinogenicity or None mutagenicity: Sensitization: Product is not expected to be a sensitizer. US-SDS 3 of 4 5/30/2015 Section 12: Ecological Information General information: Difficult to biodegrade. It can be recycled with appropriate technologies. Aquatic toxicity: None Degradation / Mobility info: No specific data available. Bioaccumulative potential: No specific data available. Section 13: Disposal Information Product disposal: Dispose of product in accordance with local, regional, and national regulations. Consult with waste contractor. Container disposal: Dispose of product in accordance with local, regional, and national regulations. Consult with waste contractor. Other considerations: No further information. Section 14: Transport Information DOT: Not Regulated IMO/IMDG: Not Regulated IATA: Not Regulated OTHER: Not Regulated Comments: None Section 15: Regulatory Information TSCA: Ethylene-Vinyl Acetate Copolymer (CAS#24937-78-8) CERCLA RQ: None SARA 311/312: None SARA 313 None California Prop 65 None Substances: Canadian DSL: None WHMIS: None Section 16: Other Information SDS Author: Tony A. Dominguez Version Date: 1/10/2015 Reasonable care has been taken in the preparation of this document and contained information, but the supplier gives no warranty or merchantability of fitness for a particular purpose. Information in this form is furnished solely for the purpose of Local, Federal and State compliance. Persons using this product shall make their own determination as to the applicability of the Hazard Communication Standard and any other requirement to their us of this product. Halex Corporation believes that the statements, technical information and recommendations set forth herein are reliable and accurate at the time of publication. US-SDS 4 of 4 5/30/2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Format : application/pdf Creator : Tony Dominguez Create Date : 2015:05:30 12:23:33-07:00 Creator Tool : Microsoft® Excel® 2013 Modify Date : 2016:12:28 15:54:03-05:00 Metadata Date : 2016:12:28 15:54:03-05:00 Producer : Microsoft® Excel® 2013 Document ID : uuid:499ffdd4-d539-49db-ad20-96cf67d8c43a Instance ID : uuid:d160ab42-8e10-472d-9f5d-01a5ae652050 Page Count : 4 Author : Tony DominguezEXIF Metadata provided by EXIF.tools