578440 Catalog 1

: Pdf 578440-Catalog 1 578440-Catalog_1 782116 Batch3 unilog

Open the PDF directly: View PDF .
Page Count: 192

Download
Open PDF In Browser	View PDF

Power Control
Motor Control.......................................................................................................................185-229
XT/Xstart IEC Motor Control...................................................................................................................................................... 186
XT/Xstart IEC Mini Contactors................................................................................................................................................... 188
XT/Xstart IEC Contactors........................................................................................................................................................... 190
Overload Relays.......................................................................................................................................................................... 196
IEC Manual Motor Protectors.................................................................................................................................................... 205
Electronic Motor-protective circuit-breaker PKE......................................................................................................................... 208
IEC Manual Motor Protectors Accessories................................................................................................................................ 209
IEC Motor Control Busbar Adapters.......................................................................................................................................... 212
Contacts for safety-relevant control functions........................................................................................................................... 213
IEC Power Control, dimensions................................................................................................................................................. 214
DOL Starters.............................................................................................................................................................................. 224
Contactor & Starter Assemblies................................................................................................................................................ 225
1000V Mining Contactors........................................................................................................................................................... 227
IT, IEC Contactors & Starters..................................................................................................................................................... 228
Accessories for IT Motor Control............................................................................................................................................... 229

Drives & Soft Starters......................................................................................................... 230-236
Soft starters............................................................................................................................................................................... 231
Variable Speed Drives................................................................................................................................................................ 233

Control & Indication ............................................................................................................237-285
22.5mm Pushbuttons................................................................................................................................................................. 238
SL signal towers......................................................................................................................................................................... 252
30.5mm Pushbuttons................................................................................................................................................................. 256
30.5mm Pushbuttons Control Stations & Enclosures................................................................................................................ 267
30.5mm Pushbuttons Accessories............................................................................................................................................ 268
30.5mm Pushbuttons, dimensions & technical data.................................................................................................................. 270
Cam switches............................................................................................................................................................................. 273

Automation & Control......................................................................................................... 286-362
Easy Relay controllers................................................................................................................................................................ 287
XC100/200 Programmable logic controllers............................................................................................................................... 293
Easy Control relays & accessories............................................................................................................................................. 295
ELC Programmable logic controllers.......................................................................................................................................... 297
Panelmate Operator Interfaces.................................................................................................................................................. 299
ELC Graphic Touch Panels.......................................................................................................................................................... 300
HMi Operator Interfaces............................................................................................................................................................ 300
LS - Titan Position Switches........................................................................................................................................................301
E50 Heavy duty modular Limit Switches....................................................................................................................................301
E49 metal body compact Limit Switches.................................................................................................................................. 307
E49 plastic modular DIN Limit Switches.....................................................................................................................................310
10316H series Rotating Shaft Limit Switches............................................................................................................................ 312
ME40 single- & two-pedal Foot Switches.................................................................................................................................. 312
E2020 Heavy Duty Pull Wire Switches...................................................................................................................................... 313
iProx Programmable Proximity Sensors..................................................................................................................................... 314
AccuProx Analogue output Proximity Sensors........................................................................................................................... 315
SpeedSense Proximity Sensors................................................................................................................................................. 315
General purpose Inductive Proximity Sensors........................................................................................................................... 316
General purpose Capacitive Proximity Sensors......................................................................................................................... 318
Cables for Plug-In Proximity Sensors......................................................................................................................................... 326
Photoelectric Sensors................................................................................................................................................................ 327
CurrentWatch Current Sensors & Switches............................................................................................................................... 335
Plug In Relays - D2 Series.......................................................................................................................................................... 342
Plug In Relays - D3 series.......................................................................................................................................................... 343
Plug In Relays - D4 Series.......................................................................................................................................................... 344
Plug In Relays - D7 Series.......................................................................................................................................................... 345
Plug In Relays - D8 Series.......................................................................................................................................................... 346
Plug In Relays - D9 Series.......................................................................................................................................................... 346
Interface Relays – XR series...................................................................................................................................................... 347
Rhomberg Monitoring Relays.................................................................................................................................................... 348
EMR4 measuring & monitoring relays....................................................................................................................................... 349
Rhomberg Control Relays.......................................................................................................................................................... 351
Timers........................................................................................................................................................................................ 351
Time Switches............................................................................................................................................................................ 353
Counters..................................................................................................................................................................................... 354

eaton corporation New Zealand Product Guide

183

Power Control
Automation & Control (cont.)............................................................................................. 286-362
Ratemeters................................................................................................................................................................................ 355
Hour Meters............................................................................................................................................................................... 356
Water Pump Pressure Switches................................................................................................................................................ 357
Riko Float Switches.................................................................................................................................................................... 357
DC Power Supplies.................................................................................................................................................................... 358
Liquid Level Controllers.............................................................................................................................................................. 358
MCS Pressure Switches............................................................................................................................................................ 359
SW Float switches..................................................................................................................................................................... 361
Temperature Controllers............................................................................................................................................................. 362

Wiring Accessories...............................................................................................................363-374
Feed-Through Terminals............................................................................................................................................................. 363
Earth Terminals........................................................................................................................................................................... 367
Double Deck/Duo Terminals....................................................................................................................................................... 368
Disconnect Terminals................................................................................................................................................................. 369
Fuse Terminals............................................................................................................................................................................ 370
Marking Tags.............................................................................................................................................................................. 371
DIN Rail & Ducting..................................................................................................................................................................... 372
Cable Accessories...................................................................................................................................................................... 373

184

eaton corporation New Zealand Product Guide

Power Control

IEC Motor Control

•	
•	
•	
•	
•	

Motor Control

Motor Control

Easy to Install
Small Footprint
Global Approvals
Type 2 Coordination
Full range of IEC Motor Control

eaton corporation New Zealand Product Guide

185

Power Control
Motor Control
XT/Xstart IEC Motor Control
The XT/XStart range of contactors, overloads & manual motor protectors is
a complete range of IEC motor control. XT/XStart is an efficient & effective
solution for applications from 7-2000A.
Eaton & Moeller Item Numbers
The XT/XStart range of IEC Motor Control was the result of a joint venture between Eaton
& Moeller. This pricebook lists these products side by side because the items are identical,
apart from branding. Accessories & components are interchangeable between the XT &
XStart ranges.
If you have always ordered these products from Moeller, you can continue to use the part
numbers you have always used. Likewise, if you have ordered parts from Eaton, you can
order the Eaton part numbers as before.

Motor Control

Key Features
Feature: 	AC & DC devices with the same dimensions achieved with an electronically
controlled coil system.
Benefit: 	Space savings, reduced engineering design time.
Feature: 	Twin terminals with separate sockets in contactors up to 400A.
Benefit: 	Offers installation & application flexibility when using different size wires. The
improved integrity of the connections reduces cabling faults.
Feature: 	Reduced sealing power consumption for DC contactors due to an electronic coil
controller that uses less power.
Benefit: 	With sealing wattage as low as 0.5W, XT/XStart contactors reduce power
consumption & generate less heat. This results in lower cooling requirements,
& the ability to mount more contactors per cabinet.
Feature: 	Integrated suppressors in DC controlled contactors from 7–1000A. Integrated
surge suppressors in all contactors from 115A & above.
Benefit: 	Offers reductions in total logistics & inventory costs by limiting the number of
products ordered & stocked. Increased installation & maintenance efficiency,
as wiring is not required.

186

eaton corporation New Zealand Product Guide

XT

Insulated surface
mount enclosure
with emergencystop actuator

Power Control

IEC Power Control

Motor Control
Insulated
flush mount
enclosure

Current
limiter
Manual Motor
Protector with
pushbutton actuation
up to 25A
Shunt and
undervoltage
release

Top-hat
rail adapter
Tripindicating
auxiliary
contact

Side mounting
auxiliary contact

Early-make
auxiliary contact

Motor Control

Manual Motor
Controller

Front mounting
auxiliary contact
Manual Motor Protector
with rotary actuation
up to 32A
Door coupling rotary
handle and axis extension

Manual Motor Protector
with rotary actuation
up to 65A

Early-make
auxiliary
contact

Electrical
connector
Front
mounting
auxiliary
contact

Mechanical
connector
up to 15A

Side mounting
auxiliary contact

Electrical
connector
Tool-less plug
connector
Contactor
up to 65 A

Contactor up to 150 A

Overload relay separate
mounting adapter
up to 65A
Contactor
up to 32 A
Contactor
up to 15 A

Overload relay
up to 15 A

Suppressor

Overload relay
up to 32 A

Overload relay
up to 150 A
Suppressor
Overload relay
up to 65 A

Overload relay
up to 150 A,
separate mounting

Top mounting
auxiliary contact
Top mounting
auxiliary contact

Eaton Electrical
1000 Cherrington Parkway
Moon Township, PA 15108-4312
USA
tel: 1-800-525-2000
www.EatonElectrical.com

© 2005 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. PT03407002E
April 2005

eaton corporation New Zealand Product Guide

187

Power Control
Motor Control
XT/Xstart IEC Mini Contactors
IEC Miniature Controls
Due to its compact size, the XT line of mini controls is best suited to be applied in light duty loads such as hoisting, packaging,
material handling, heating, lighting & automation systems. XT mini contactors are a particularly compact, economic &
environmentally friendly solution wherever control of small motors or loads is required.

W:45mm H:58mm D:52mm

Motor Control

Mini ContactorsE9
Operational Current
AC-3 Amp Rating

Thermal Current
AC-1

Maximum kW Ratings AC-3, 3-Phase Motors,
50 – 60 Hz

No. of
Power Poles

240V

415V

6.6

20

1.5

3

3

1NO

XTMC6A10_

-

6.6

20

1.5

3

3

1NC

XTMC6A01_

-

Aux. Contacts

Eaton Item No. 

Moeller
Item No. 

8.8

20

2.2

4

3

1NO

XTMC9A10_

DILEM-10(…)

8.8

20

2.2

4

3

1NC

XTMC9A01_

DILEM-01(…)

8.8

20

2.2

4

4

-

XTMF9A00_

DILEM4(…)



Underscore (_) indicates Magnetic Coil Suffix required. See Coil Selection Chart.

Coil Selection Chart
AC Coil Voltage (50Hz)

Eaton Suffix Code

Moeller Suffix Code

DC Coil Voltage

Eaton Suffix Code

Moeller Suffix Code

415

C

(415V50HZ,480V60HZ)

24

TD

G(24VDC)

230-240

F

(240V50HZ)

110

A

(110V50/60HZ)

24

T

(24V50HZ)

NNote: Mini Contactor Coils are not interchangeable. For additional coil voltages contact Eaton.

IEC Miniature Overload Relays
•	
•	
•	
•	
•	

Trip Class 10A
Ambient temperature compensated -5° to 50°C
Selectable manual / automatic reset
1NO-1NC auxiliary contact as standard
Direct mount with XTMC contactors

Mini Overload Relays
Motor full load current (FLC)

Trip Class

Contact Configuration

Eaton Item No.

Moeller Item No.

0.1 – 0.16A
0.16 – 0.24A
0.24 – 0.4A
0.4 – 0.6A

10A

1NO-1NC

XTOMP16AC1
XTOMP24AC1
XTOMP40AC1
XTOMP60AC1

ZE-0,16
ZE-0,24
ZE-0,4
ZE-0,6

0.6 – 1A
1 – 1.6A
1.6 – 2.4A

10A

1NO-1NC

XTOM001AC1
XTOM1P6AC1
XTOM2P4AC1

ZE-1,0
ZE-1,6
ZE-2,4

2.4 – 4A
4 – 6A
6 – 9A
9 – 12A

10A

1NO-1NC

XTOM004AC1
XTOM006AC1
XTOM009AC1
XTOM012AC1

ZE-4
ZE-6
ZE-9
ZE-12



188

E9

When fitted directly to the contactor, a clearance of at least 5 mm is required between the overload relays.

eaton corporation New Zealand Product Guide

Power Control
Motor Control
XT/Xstart IEC Mini Contactors
IEC Miniature Controls Accessories

Contact Configuration

Poles

Eaton Item No.

Moeller Item No.

1NO/1NC

2

XTMCXFA11

11DILE

2NO

2

XTMCXFA20

20DILE

2NC

2

XTMCXFA02

02DILE

2NO2NC

4

XTMCXFA22

22DILE

1NO/3NC

4

XTMCXFA13

13DILE

3NO1NC

4

XTMCXFA31

31DILE

4NO

4

XTMCXFA40

40DILE

4NC

4

XTMCXFA04

04DILE

1ECNO/1LONC

2

XTMCXFAL11

-

2ECNO/2LONC

2

XTMCXFAL22

22DDILE

Motor Control

XT IEC Miniature Controls Accessories (Auxiliary Contacts for Mini Contactors, Front (top) Mounted)E9

NNote: Auxiliary contacts are rated for 10A AC-1.

Mechanical InterlockE9
Description

Eaton Item No.

Moeller Item No.

Mechanical Interlock

XTMCXML

MVDILE

NNote: For two contactors with AC or DC operated coils that are horizontally or vertically mounted, the distance between contactors is 0 mm.

Reversing Link KitE9
Description

Eaton Item No.

Moeller Item No.

Main current wiring for reversing contactors
& starters.

XTMCXRL

MVS-WB-EM

NNote: Reversing Link Kit does not include mechanical interlock. Order part No. XTMCXML for Mechanical Interlock.

Star-Delta Link KitE9
Description

Eaton Item No.

Moeller Item No.

Main current wiring for
star-delta combinations. Includes the Star-Delta
Bridge.

XTMCXSDL

MVS-SB-EM

Other AccessoriesE9
Description

Eaton Item No.

Moeller Item No.

Connector for mechanically arranging
contactors in combinations.

XTMCXCN

V0DILE

Shroud IP40 Sealable Shroud, snap fit

XTMCXSHROUD

HDILE

NNote: 0 mm distance between contactors with connector.

eaton corporation New Zealand Product Guide

189

Power Control
Motor Control
XT/Xstart IEC Contactors
IEC Contactors
•	
•	
•	
•	
•	
•	

Motor Control

•	

AC-3 contactor ratings to 1600A & AC-1 contactor ratings
to 2000A
Panel or DIN-Rail mounting to 65A
IP20 finger & back-of-hand proof
Built-in NO or NC auxiliary contacts to 32A
Built-in surge suppression on DC coils XTCE Frame B-G & AC
or DC coils on XTCE Frame L-R
Can be used with XT or C396 Overload Relays
Can be used with XTPR MMPs for Manual Motor Controllers

Full Voltage Non-Reversing 3-Pole Contactors, Frame B – Frame G

E9

IEC Ratings
Maximum kW Ratings AC-3
3-Phase Motors 50 – 60 Hz
AC-1
(40°C)
Ie = Ith (A)

380/
400V

7
7
9
9

20
20
20
20

12
12
15.5
15.5

AC-3
Ie (A)

415V

660/
690V

Aux.
Contacts

Screw
Terminals 
Eaton Item No.

Moeller Item No.

3
3
4
4

4
4
5.5
5.5

3.5
3.5
4.5
4.5

1NO
1NC
1NO
1NC

XTCE007B10_
XTCE007B01_
XTCE009B10_
XTCE009B01_

DILM7-10(…)
DILM7-01(…)
DILM9-10(…)
DILM9-01(…)

20
20
20
20

5.5
5.5
7.5
7.5

7
7
8
8

6.5
6.5
7
7

1NO
1NC
1NO
1NC

XTCE012B10_
XTCE012B01_
XTCE015B10_
XTCE015B01_

DILM12-10(…)
DILM12-01(…)
DILM15-10(…)
DILM15-01(…)

35
35
40
40
40
40

7.5
7.5
11
11
15
15

10
10
14.5
14.5
18
18

11
11
14
14
17
17

1NO
1NC
1NO
1NC
1NO
1NC

XTCE018C10_
XTCE018C01_
XTCE025C10_
XTCE025C01_
XTCE032C10_
XTCE032C01_

DILM17-10(…)
DILM17-01(…)
DILM25-10(…)
DILM25-01(…)
DILM32-10(…)
DILM32-10(…)

50
65
80
80

18.5
22
30
37

24
30
39
41

23
30
35
35

—
—
—
—

XTCE040D00_
XTCE050D00_
XTCE065D00_
XTCE072D00_

DILM40(…)
DILM50(…)
DILM65(…)
-

90
110

37
45

48
57

63
75

—
—

XTCE080F00_
XTCE095F00_

DILM80(…)
DILM95(…)

130
160
275 d

55
75
90

70
91
100

90
96
96

—
—
—

XTCE115G00_
XTCE150G00_
XTCE170G00_

DILM115(…)
DILM150(…)
-

Frame B

Frame C
18
18
25
25
32
32
Frame D
40
50
65
72
Frame F
80
95
Frame G
115
150
170

 Underscore (_) indicates magnet coil suffix required. See Page 230.
NNote: The 7 – 32A contactors have positively driven contacts between the integrated auxiliary contact & the auxiliary contact module as well as within the auxiliary contact modules.
The 40 – 65A contactors have positively driven contacts within the auxiliary contact module. 6 auxiliary contacts are possible with a combination of side mounted & front mount auxiliary contacts.
DC operated contactors (Frames B – G, 7 – 150A) have a built-in suppressor circuit. Frame B – C contactors with 1NC built-in auxiliary are mirror contacts (XTCE...B01_ – XTCE...C01_).

190

eaton corporation New Zealand Product Guide

Power Control

XT/Xstart IEC Contactors
IEC Contactors

Motor Control

Full Voltage Non-Reversing 3-Pole Contactors, Frame L – Frame R

E9

IEC Ratings
Maximum kW Ratings AC-3
AC-1
(40°C)
Ie = Ith (A)

AC-3
Ie (A)

3-Phase Motors 50 – 60 Hz
380/
400V

415V

660/
690V

1000V

Aux.
Contacts

Eaton Item No. 

Moeller Item No.

Frame L — Standard Coil (110/120V, 230/240V ac Coil Only)
185
225
250

337
386
429

90
110
132

110
132
148

175
215
240

108
108
108

2NO-2NC
2NO-2NC
2NO-2NC

XTCS185L22_
XTCS225L22_
XTCS250L22_

DILM185-S/22(…)
DILM225-S/22(…)
DILM250-S/22(…)

90
110
132

110
132
148

175
215
240

108
108
108

2NO-2NC
2NO-2NC
2NO-2NC

XTCE185L22_
XTCE225L22_
XTCE250L22_

DILM185/22(…)
DILM225/22(…)
DILM250/22(…)

185
225
250

337
386
429

Frame M — Standard Coil (110/120V, 230/240V ac Coil Only)
300
400
500
580

490
612
857
980

160
200
250
315

180
240
300
­
—

286
344
344
344

132
132
132
132

2NO-2NC
2NO-2NC
2NO-2NC
2NO-2NC

XTCS300M22_
XTCS400M22_
XTCS500M22_
XTCS570M22_

DILM300-S/22(…)
DILM400-S/22(…)
DILM500-S/22(…)
-

160
200
250
315

180
240
300
350

286
344
344
344

132
132
132
132

2NO-2NC
2NO-2NC
2NO-2NC
2NO-2NC

XTCE300M22_
XTCE400M22_
XTCE500M22_
XTCE570M22_

DILM300/22(…)
DILM500/22(…)
-

315
355
400
450
560

348
390
455
500
610

560
630
720
750
1000

600
600
800
800
1000

2NO-2NC
2NO-2NC
2NO-2NC
2NO-2NC
2NO-2NC

XTCE580N22_
XTCE650N22_
XTCE750N22_
XTCE820N22_
XTCEC10N22_

DILM580/22(…)
DILM650/22(…)
DILM750/22(…)
DILM820/22(…)
DILM1000/22(…)

—

—

—

—

2NO-2NC

XTCEC14P22_

-

900
—

900
—

1600
—

1700
—

2NO-2NC
2NO-2NC

XTCEC16R22_
XTCEC20R22_

-

Motor Control

Frame L — Electronic Coil

Frame M — Electronic Coil
300
400
500
580

490
612
857
980

Frame N — Electronic Coil
580
650
750
820
1000

980
1041
1102
1225
1225

Frame P — Electronic Coil
—

1714

Frame R — Electronic Coil
1600
—

2200
2450

Contactors Frame L - R:
Standard Coil: Cost Saving, 110 & 240V AC Control Only, L & M Frames.
Electronic Coil: Wide range of control voltages, Can be controlled by a PLC output, Can be controlled by a low power command device, like a limit switch or sensor.
 Underscore (_) indicates magnet coil suffix required. See Page 230.

Contactor Application Data
Item Prefix

Electrical Life (Operations) for 10 hp,
480V (14.2A) Applications

XTCE012B

1 million

XTCE015B

1.2 million

XTCE018C

2 million

NNote: AC & DC operated contactors have a built-in suppressor circuit.
(Frames L – R, 185 – 2000A).

eaton corporation New Zealand Product Guide

191

Power Control
Motor Control
XT/Xstart IEC Contactors
Coil Suffix Tables

Magnet Coil Suffix (Continued)

Magnet Coil Suffix
Coil Voltage

Eaton Suffix Code

Moeller Suffix Code

Motor Control

Coil Voltage

Eaton Suffix Code

Moeller Suffix Code

Frame L – N, Electronic Coil (DILM185 - DILM250)

Frame B – F (DILM7 - DILM95)
24V 50/60 Hz

T

(RAC24)

110 – 250V 40 – 60 Hz/DC

A

(RA250)

110V 50 Hz, 120V 60 Hz

A

(110V50/60HZ)

250 – 500V 40 – 60 Hz

C

(RAC500)

230-240V 50 Hz

F

(240V50HZ)

24 – 48V dc

TD

(RDC48)

415V 50 Hz, 480V 60 Hz

C

(415V50HZ,480V60HZ)

Frame L – M, Standard Coil (DILM185-S - DILM250-S)

24V DC

TD

DILM7-DILM15 (24VDC)

110 – 120V 50/60 Hz

A

N/A

DILM17-DILM95 (RDC24)

220 – 240V 50/60 Hz

B

(220-240V50/60HZ)

B

(RAW250)

Frame G (DILM115 - 150)

Frame P – R

100 – 120V 50/60 Hz

A

(RAC120)

190 – 240V 50/60 Hz

B

(RAC240)

24V 50/60 Hz

T

(RAC24)

24 – 27V dc

TD

(RDC24)

480 – 500V 50/60 Hz

C

(RAC440)

220 – 250V 50 – 60 Hz/DC

Reversing Contactor Components

192

Qty

Frame

B

C

D

F

G

2

Contactor

XTCE...B01_

XTCE...B01_

XTCE...D00_

XTCE...F00_

XTCE...G00_

2

Auxiliary Contact

XTCEXFAC20

XTCEXFAC20

XTCEXFBG11

XTCEXFBG11

XTCEXFBG11

1

Mechanical Interlock

XTCEXMLB

XTCEXMLC

XTCEXMLD

XTCEXMLG

XTCEXMLG

1

Reversing Link Kit

XTCEXRLB

XTCEXRLC

XTCEXRLD

XTCEXRLG

XTCEXRLG

eaton corporation New Zealand Product Guide

Power Control
Motor Control
XT/Xstart IEC Contactors
IEC Four Pole & Capacitor Contactors

XTCF 4-Pole Contactors, Frame B – Frame GE9
Ie (A)

Ie = Ith (A)

Maximum kW Ratings AC-3

AC-3

AC-1

3 Ph Motors 50 – 60 Hz
400V, kW

415V, kW

5.5

7

Item No. 

Moeller Item No.

XTCF020B00_

-

Frame B
12

20

18

32

7.5

10

XTCF032C10_

DILMP-32-10(…)

25

45

11

14.5

XTCF045C10_

DILMP-45-10(…)

Frame D
40

63

18.5

24

XTCF063D00_

DILMP63(…)

50

80

22

30

XTCF080D00_

DILMP80(…)

80

125

37

48

XTCF125G00_

DILMP125(…)

95

160

45

57

XTCF160G00_

DILMP160(…)

115

200

55

70

XTCF200G00_

DILMP200(…)

Motor Control

Frame C

Frame G*

*See page 230 for G frame coil suffix. Contactors with 240Vac coils are stocked.

XTCC Capacitor Contactors, Frame C – Frame DE9
Switching duty in kvar - Group compensation, without reactor
230V

400V

Item No. 
525V

Moeller Item No.

690V

Frame C
11

20

25

33.3

XTCC020C11_

DILK20-11

15

25

33.3

40

XTCC025C11_

DILK25-11

Frame D
20

33.3

40

55

XTCC033D10_

DILK33-10

25

50

65

85

XTCC050D10_

DILK50-10

Other coil voltages have a 1-day lead time.
 Underscore [ _ ] indicates magnet coil suffix required. See Coil Selection Chart.

Magnet Coil SuffixE9
Coil Voltage

Eaton Suffix Code

Moeller Suffix Code

24V 50/60 Hz

T

(RAC24)

110V 50 Hz, 120V 60 Hz

A

(110V50/60HZ)

230-240V 50 Hz

F

(240V50HZ)

415V 50 Hz, 480V 60 Hz

C

(415V50HZ,480V60HZ)

24V DC

TD

DILM7-DILM15 (24VDC)

Frame B – F (DILM7 - DILM95)

DILM17-DILM95 (RDC24)
Frame G (DILM115 - 150)
100 – 120V 50/60 Hz

A

(RAC120)

190 – 240V 50/60 Hz

B

(RAC240)

24V 50/60 Hz

T

(RAC24)

24 – 27V dc

TD

(RDC24)

480 – 500V 50/60 Hz

C

(RAC440)

eaton corporation New Zealand Product Guide

193

Power Control
Motor Control
XT/Xstart IEC Contactors
Accessories

Auxiliary Contacts

E9
Conventional
Thermal Current,
Open at 60°C
Ith = Ie,
AC-1 in Amps

Poles

Contact
Configuration

Screw Terminals
Eaton Item No.

Moeller Item No.

16

2

2NO

XTCEXFAC20

DILA-XHI20

16

2

1NO-1NC

XTCEXFAC11

DILA-XHI11

16

4

4NO

XTCEXFAC40

DILA-XHI40

16

4

2NO-2NC

XTCEXFAC22

DILA-XHI22

16

1

1NO

XTCEXSAB10

DILA-XHI10-S

16

1

1NC

XTCEXSAB01

DILA-XHI01-S

10

2

1NO-1NC

XTCEXSCC11

DILM32-XHI11-S

16

2

2NO

XTCEXFBG20

DILM150-XHI20

16

2

1NO-1NC

XTCEXFBG11

DILM150-XHI11

16

4

4NO-0NC

XTCEXFBG40

DILM150-XHI40

16

4

2NO-2NC

XTCEXFBG22

DILM150-XHI22

Motor Control

Frame B – C — Front (Top) Mount

Frame B — Side Mount 

Frame C — Side Mount

Frame D — G



Can be mounted to the left side of contactor only. Cannot be used in combination with front (top) mount auxiliary contacts or mechanical interlocks.

NNote: Interlocked opposing contacts, to IEC/EN 60947-5-1 Annex L (positively driven), within the auxiliary contact modules (not NO (early make) & NC (late break) contacts) & for the built-in auxiliary contacts of the XTCE007B... –
XTCE032C....Auxiliary break contact can be used as mirror contact to IEC/EN 60947-4-1 Annex F (not NC (late break) contact). No auxiliary contacts can be fitted between two contactors.

194

eaton corporation New Zealand Product Guide

Power Control
Motor Control
XT/Xstart IEC Contactors
Accessories

Side Mount Auxiliary Contacts for Frame D – R, 40 – 2000A

E9

Conventional Free Air Thermal
Current,
Ith = Ie, AC-1 in Amps

Poles

Contact Configuration

Screw Terminals
Eaton Item No.

Moeller Item No.

10

2

1NO-1NC

XTCEXSBN11

DILM1000-XHI11-SI

NNote: For Frames B – C, cannot use both a side & a top mount auxiliary contact at the same time. For Frame D, 6 auxiliary contacts maximum (can be a combination of side & top mount units). For Frames F – R,
8 auxiliary contacts maximum (can be a combination of side & top mount units).

Accessories

E9
For Use with...

Pkg. Qty.

Eaton Item No.

Moeller Item No.

XTCE007B – XTCE015B,
XTCF020B

5

XTCEXMLB

DILM12-XMV

XTCE018C – XTCE032C
XTCF032C – XTCF045C
XTCE040D – XTCE072D

1

XTCEXMLC

DILM32-XMV

Motor Control

Frame D – R

Mechanical Interlock 

XTCF063D – XTCF080D

1

XTCEXMLD

DILM65-XMV

XTCE080F – XTCE170G
XTCF125G – XTCF200G

1

XTCEXMLG

DILM150-XMV

XTCE185L – XTCE570M

1

XTCEXMLM

DILM500-XMV

XTCE580N – XTCEC10N

1

XTCEXMLN

DILM820-XMV

XTCE007B – XTCE015B

1

XTCEXRLB

DILM12-XRL

Reversing Link Kits





XTCE018C – XTCE032C

1

XTCEXRLC

DILM32-XRL

XTCE040D – XTCE065D

1

XTCEXRLD

DILM65-XRL

XTCE080F – XTCE150G

1

XTCEXRLG

DILM150-XRL

XTCE185L – XTCE250L

1

XTCEXRLL

DILM250-XRL

XTCE300M – XTCE400M

1

XTCEXRLM400

DILM400-XRL

F
or two contactors with AC or DC operated magnet system which are horizontally or vertically mounted. For B – G frames, mechanical lifespan is 2.5 x 106 operations & the distance between contactors is 0 mm. For L – N
frames, mechanical lifespan is 5 x 106 operations & no auxiliary contact can be mounted between the mechanical interlock & the contactor — the distance between contactors is 15 mm.
XTCEXMLG, XTCEXMLN & XTCEXMLNM & Moeller equivalents consist of an interlock element & mounting plate.
Also includes Interlocking Bridge (XTCEXLBB).

eaton corporation New Zealand Product Guide

195

Power Control
Motor Control
Overload Relays

Motor Control

Product Overview

196

Description

XTOB, XTOT Thermal Overload Relays

C396 Electronic
Overload Relays

Motor Insight Overload
and Monitoring Relays

Moeller Type

ZB

Not Available

Not Available

Page

Page 235

Page 237

Page 241

Relay Type

Thermal Bi-Metallic

Electronic

Electronic

Direct Connect to XT Contactor

Yes, XTCE (DILM)

Yes, XTCE (DILM)

—

Separate Mount

Yes, Adapter

Yes

Yes

FLC Range

0.1 – 630A

0.1 – 1500A

1 – 540A (with CTs)

FLC Max.:Min. Ratio

Approx. 1.5:1

5:1

—

Motor Overload Protection

Yes

Yes

Yes

Underload Protection

—

—

Yes

Supply Protection

—

—

Yes

Enhanced Phase Loss Protection

—

Yes

Yes

Enhanced Phase Imbalance Protection

—

Yes

Yes

Trip Class

10A

Selectable 5 / 10 / 20 / 30

5 – 30

Reset Type

Selectable Manual / Automatic

Selectable Manual / Automatic

Selectable Manual / Automatic / Programmable / Remote

Communications with I/O

—

—

Yes (Modbus, DeviceNet, PROFIBUS)

Remote Display

—

—

Yes

Ground Fault

—

—

Yes

Alarm No Trip

—

—

Yes (voltage & ground faults)

Jam

—

Yes

Yes

Programmable Reset Timers

—

—

Yes

Progammable Reset Attempts

—

—

Yes

Current Monitoring

—

—

Yes

Voltage Monitoring

—

—

Yes

Power Monitoring

—

—

Yes

Thermal Capacity Monitoring

—

—

Yes

Motor Run Hours Monitoring

—

—

Yes

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Overload Relays
Bi-metallic Overload Relays

•	
•	
•	

Direct mount to XT & DILM contactors or separate mount
Class 10A
Up to 630A
Ambient - compensated bi-metallic

Overload Relays
Overload Releases, Ir

E9
Contact Configuration

For Use with Contactor Ampere
Range

Eaton Item No.

Moeller Item No.

Frame B — Direct Mount to XTCE...B Contactor (DILM7-15)
0.1 – 0.16
0.16 – 0.24
0.24 – 0.4
0.4 – 0.6

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

7 – 15A
7 – 15A
7 – 15A
7 – 15A

XTOBP16BC1
XTOBP24BC1
XTOBP40BC1
XTOBP60BC1

ZB12-0,16
ZB12-0,24
ZB12-0,4
ZB12-0,6

0.6 – 1
1 – 1.6
1.6 – 2.4
2.4 – 4

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

7 – 15A
7 – 15A
7 – 15A
7 – 15A

XTOB001BC1
XTOB1P6BC1
XTOB2P4BC1
XTOB004BC1

ZB12-1
ZB12-1,6
ZB12-2,4
ZB12-4

4–6
6 – 10
9 – 12
12 – 16

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

7 – 15A
7 – 15A
9 – 15A
12 – 15A

XTOB006BC1
XTOB010BC1
XTOB012BC1
XTOB016BC1

ZB12-6
ZB12-10
ZB12-12
ZB12-16

Motor Control

•	

Frame C — Direct Mount to XTCE...C Contactor (DILM17-32)
0.6 – 1
1 – 1.6
1.6 – 2.4
2.4 – 4

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

18 – 32A
18 – 32A
18 – 32A
18 – 32A

XTOB001CC1
XTOB1P6CC1
XTOB2P4CC1
XTOB004CC1

ZB32-1
ZB32-1,6
ZB32-2,4
ZB32-4

4–6
6 – 10
10 – 16
16 – 24
24 – 32

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

18 – 32A
18 – 32A
18 – 32A
18 – 32A
25 – 32A

XTOB006CC1
XTOB010CC1
XTOB016CC1
XTOB024CC1
XTOB032CC1

ZB32-6
ZB32-10
ZB32-16
ZB32-24
ZB32-32

Frame D — Direct Mount to XTCE...D Contactor (DILM40-65)
6 – 10
10 – 16
16 – 24

1NO-1NC
1NO-1NC
1NO-1NC

40 – 72A
40 – 72A
40 – 72A

XTOB010DC1
XTOB016DC1
XTOB024DC1

ZB65-10
ZB65-16
ZB65-24

24 – 40
40 – 57
50 – 65
65 – 75

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

40 – 72A
50 – 72A
65 – 72A
72A

XTOB040DC1
XTOB057DC1
XTOB065DC1
XTOB075DC1

ZB65-40
ZB65-57
ZB65-65
ZB65-75

Frame F – G — Direct Mount to XTCE...F or XTCE...G Contactor (DILM80-150)
35 – 50
50 – 70
70 – 100

1NO-1NC
1NO-1NC
1NO-1NC

80 – 170A
80 – 170A
80 – 170A

XTOB050GC1
XTOB070GC1
XTOB100GC1

ZB150-50
ZB150-70
ZB150-100

95 – 125
120 – 150
145 – 175

1NO-1NC
1NO-1NC
1NO-1NC

80 – 170A
80 – 170A
150 – 170A

XTOB125GC1
XTOB150GC1
XTOB175GC1

ZB150-125
ZB150-150
ZB150-175

eaton corporation New Zealand Product Guide

197

Power Control
Motor Control
Overload Relays
Bi-metallic Overload Relays

Overload Relay (Continued)
Overload Releases, Ir

E9

Contact Configuration

For Use with Contactor Ampere
Range

Eaton Item No.

Moeller Item No.

Motor Control

Frame F – G — Separate Mount (DILM80-150)
35 – 50
50 – 70
70 – 100

1NO-1NC
1NO-1NC
1NO-1NC

80 – 170A
80 – 170A
80 – 170A

XTOB050GC1S
XTOB070GC1S
XTOB100GC1S

ZB150-50/KK
ZB150-70/KK
ZB150-100/KK

95 – 125
120 – 150
145 – 175

1NO-1NC
1NO-1NC
1NO-1NC

80 – 170A
80 – 170A
150 – 170A

XTOB125GC1S
XTOB150GC1S
XTOB175GC1S

ZB150-125/KK
ZB150-150/KK
ZB150-175/KK

Frame L — Direct Mount to XTC(E or S)...L or Separate Mount (DILM185-250)
50 – 70
70 – 100
95 – 125

1NO-1NC
1NO-1NC
1NO-1NC

185 - 250A
185 - 250A
185 - 250A

XTOB070LC1
XTOB100LC1
XTOB125LC1

Z5-70/FF250
Z5-100/FF250
Z5-125/FF250

120 – 160
160 – 220
200 – 250

1NO-1NC
1NO-1NC
1NO-1NC

185 - 250A
185 - 250A
225 - 250A

XTOB160LC1
XTOB220LC1
XTOB250LC1

Z5-160/FF250
Z5-220/FF250
Z5-250/FF250

NNote: Short circuit protection: Observe the maximum permissible fuse of the contactor with direct device mounting. See MN03402001E for more information on overload relays for Frame B – G.
Trip Class: 10A.
Suitable for protection of EEx e-motors. EC prototype test certificate available upon request.
Observe manuals MN03402001E & MN03407001E, See Documentation — Manuals for Overload Monitoring of EEx e-motors.

Current Transformer Operated Overload Relay
Overload Releases, Ir

Contact Sequence

E9

Contact Configuration

For Use with Contactor
Ampere Range

Eaton Item No.

Moeller Item No.

1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC

300 – 500A
300 – 500A
300 – 500A
500A
630A

XTOT240C3S
XTOT290C3S
XTOT400C3S
XTOT540C3S
XTOT630C3S

ZW7-240
ZW7-290
ZW7-400
ZW7-540
ZW7-630

Frame M – N — Separate Mount
160 – 240
190 – 290
270 – 400
360 – 540
420 – 630

DIN-Rail or Panel-Mount Adapter, Frame C – D — Accessories



198

E9

For Use with...

Pkg. Qty.

Eaton Item No.

Moeller Item No.

XTOB...CC1

5

XTOBXDINC

ZB32-XEZ

XTOB...DC1

2

XTOBXDIND

ZB65-XEZ

Can be snap fitted on a top hat rail (DIN-Rail) or can be screw fitted.

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Overload Relays
C396 Electronic Overload Relays

C396 A 2 A P05 SEL AX

Item Numbering System

Device Type

Stand-Alone Overload Relay Suffix
Frame Size

A = 45 mm
B = 65 mm
C = 110 mm

Class
Max. Amperes
Current Rating

SEL = Selectable

Feature Set

Reset Type

A = Auto

XT IEC Adapter Suffix

Frame B
XB	=	0.1 – 0.5A
		 0.4 – 2.0A
		 1 – 5A
		 1.6 – 8A
		 6.4 – 32A

Frame A (45 mm)

2 = Standard

AX	=	All Frame Sizes

P05 = 0.1 – 0.5
002 = 0.4 – 2.0
005 = 1 – 5
008 = 1.6 – 8
032 = 6.4 – 32
045 = 9 – 45

Frame C
XC	 =	0.1 – 0.5A
		 0.4 – 2.0A
		 1 – 5A
		 1.6 – 8A
		 6.4 – 32A

Frame B (65 mm)
075 = 15 – 75
110 = 22 – 110
Frame C (110 mm)

Motor Control

C396 = C396 Electronic Overload Relay

Frame D

150 = 30 – 150

XD	=	6.4 – 32A
		 9 – 45A
		 15 – 75A
Frame F – G
XF	 =	22 – 110A

•	
•	
•	
•	
•	
•	

Direct mount to XT contactors & Moeller DILM Contactors
or separate mount
Standard version: selectable trip class (5, 10, 20, 30) with selectable
manual or auto reset
Broad 5:1 FLC range
Self-powered design, will accept ac voltages from
12 – 690V 50/60 Hz
Electrically isolated 1NO-1NC contacts (Push-to-Test)
FLC range of 0.1 – 1500 amps

C396 Overload for Integrated Use with XT IEC Contactors & Moeller DILM ContactorsE9
FLC Range (Amps)

XT IEC Contactor Frame Size / Width

Item No.

B / 45 mm
B / 45 mm
B / 45 mm
B / 45 mm

C396A2A002SELXB
C396A2A005SELXB
C396A2A008SELXB
C396A2A032SELXB

C / 45 mm
C / 45 mm

C396A2A008SELXC
C396A2A032SELXC

D / 55 mm
D / 55 mm
D / 55 mm

C396A2A032SELXD
C396A2A045SELXD
C396B2A075SELXD

F – G / 90 mm

C396B2A110SELXF

Direct Mount to XTCE...B Contactor (DILM7-15)
0.4 – 2.0
1–5
1.6 – 8
6.4 – 32
Direct Mount to XTCE...C Contactor (DILM17-32)
1.6 – 8
6.4 – 32
Direct Mount to XTCE...D Contactor (DILM40-65)
6.4 – 32
9 – 45
15 – 75
Direct Mount to XTCE...F or XTCE...G Contactor (DILM80-150)
22 – 110

C396 Stand-Alone Overload RelayE9
FLC Range(Amps)

Description

Item No.

0.4 – 2.0
1–5
1.6 – 8
6.4 – 32
9 – 45

45 mm Frame Overload Relay

C396A2A002SELAX
C396A2A005SELAX
C396A2A008SELAX
C396A2A032SELAX
C396A2A045SELAX

15 – 75
22 – 110

65 mm Frame Overload Relay

C396B2A075SELAX
C396B2A110SELAX

30 – 150

110 mm Frame Overload Relay

C396C2A150SELAX




verload comes with a panel / DIN-Rail mounting adapter assembled. No separate mounting adapter accessory offered.
O
Panel-mount only! Overload comes with integrated pass-through holes for power wires. Bus Bar Kit (C396CBAR or C396CBARXT, and Lug Kit (C396CLUG) must be purchased separately
if customer prefers not to use pass-through capability.

eaton corporation New Zealand Product Guide

199

Power Control
Motor Control
Overload Relays
C396 Overload Relays

Motor Control

Current Transformer Kits for Use with Stand-Alone Overload Relay C396A2A005SELAX
FLC Range (Amps)

Description

Item No.

60 – 300

300: 5 Panel-mount CT kit with integrated, pass-through holes. Kit includes CT, bus bars, lugs & hardware to mount
C396A2A005SELAX(not included).

C396CTK300

120 – 600

600: 5 Panel-mount CT kit with integrated, pass-through holes. Kit includes CT, bus bars, lugs & hardware to mount
C396A2A005SELAX (not included).

C396CTK600

200 – 1000

1000: 5 Panel-mount CT kit with integrated, pass-through holes. Kit includes CT,
bus bars, lugs & hardware to mount C396A2A005SELAX (not included).

C396CTK1000

300 – 1500

1500: 5 Panel-mount CT kit with integrated, pass-through holes. Kit includes CT,
bus bars, lugs & hardware to mount C396A2A005SELAX (not included).

C396CTK1500

 C396A2A005SELAX is not included in the current transformer kits. This item must be ordered separately.

Accessories

E9
Description

Item No.

Reset Bar Kit
assembles to the top of the overload to increase reset area

C396ARST

110 mm XT Bus Bar Kit

C396CBARXT

Remote Reset 24V dc

C396RR024DC

Remote Reset 24V ac

C396RR024AC

Remote Reset 120V ac

C396RR120AC

Remote Reset 240V ac

C396RR240AC

C396ARST +
C396RR_ _ _ _ _
Assembled to a C396
Overload Relay

200



Bus bar kits do not include lugs. Order C396CLUG if lugs are needed (3 lugs per kit).



Reset Bar Kit (C396ARST) required to use the Remote Reset modules.

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Overload Relays
Electronic motor-protective relay ZEV

•	
•	
•	
•	
•	
•	
•	
•	

Protection against unbalance
Overload protection
Tripping class between 5 & 40
Earth leakage protection
Integrated thermistor connection allows the relay to be expanded to provide a full motor protection system
LCD display with fault indication
2 standard contacts 1 N/O, 1 N/C, 2 free programmable contacts for fault indication
Phase failure protection
PTB 01 ATEX 3233

E9
Setting range overload releases, Ir , A
Length

Diameter n mm

–

–

1 – 820

ZEV

–

6

1 – 25

ZEV-XSW-25

–

13

3 – 65

ZEV-XSW-65

–

21

10 – 145

ZEV-XSW-145

–

110

40 – 820

ZEV-XSW-820

Part. No.

Motor Control

•	

Current sensors

Connecting cables
200

–

–

ZEV-XVK-20

400

–

–

ZEV-XVK-40

800

–

–

ZEV-XVK-80

40

–

SSW40-0,3

–

SSW40-0,5

–

SSW40-1

65

–

SSW65-0,5

65

–

SSW65-1

120

–

SSW120-0,5

120

–

SSW120-1

SSW core-balance transformers, for earth-leakage monitoring
–

eaton corporation New Zealand Product Guide

201

Power Control
Motor Control
Overload Relays
Thermal overload relay EMT6 for machine protection
Thermistor overload relays for machine protection
3 A rated operational current for
AC-15, 240 V
AC-14, 415 V

E9

Motor Control


Description

Rated control voltage Us , V

Item No.

Without automatic reset
Mains & fault LED display

24 – 240 V 50/60 Hz,
24 – 240 V DC

EMT6

Without automatic reset Mains & fault LED display
Trip with short-circuit in the sensor cable

24 – 240 V 50/60 Hz,
24 – 240 V DC

EMT6-K

Without automatic reset
Mains & fault LED display

230 V 50/60 Hz

EMT6(230V)

Selector switch with/without automatic reset
For manual or remote resetting
Test button
Mains & fault LED display

24 – 240 V 50/60 Hz,
24 – 240 V DC

EMT6-DB

Selector switch with/without automatic reset
For manual or remote resetting
Test button
Mains & fault LED display
Trip with short-circuit in the sensor cable

24 – 240 V 50/60 Hz,
24 – 240 V DC

EMT6-KDB

Selector switch with/without automatic reset
For manual or remote resetting Test button
Mains & fault LED display

230 V 50/60 Hz

EMT6-DB(230V)

Multifunction device
Selector switch with/without automatic reset
Trip with short-circuit in the sensor cable
Zero-voltage safe
For manual or remote resetting
Test button
Short-circuit recognition & zero-voltage safety can be
deactivated
Mains & fault LED display

24 – 240 V 50/60 Hz,
24 – 240 V DC

EMT6-DBK

For screw fixing

–

CS-TE

Accessories, Screw adapter

202

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Overload Relays
Motor Insight Power Monitoring Relays

C441 B A

Item Numbering System

Overload Relay Current Rating

Device Type

C441 = Motor Insight Overload Relay

Overload Relay Voltage

A = 2 – 9A
B = 20 – 90A

B	 =	240V
C	 =	480V
D	 =	600V
Communications Module

Motor Control

K	 =	DeviceNet Module 4IN/2OUT 120V ac
L	 =	DeviceNet Module 4IN/2OUT 24V dc
M	=	Modbus Module
N	 =	Modbus Module 4IN/2OUT 120V ac
P	 =	Modbus Module 4IN/2OUT 24V dc
Q	 =	PROFIBUS Module 4IN/2OUT 24V dc
Accessory Type

1	
=	Type 1 and 12 Remote-Mounted Display
3	
=	Type 3R Kit for Remote Display
CMP1	=	Mounting Plate
Motor Insight™ Overload Power Monitoring Relays
•	

•	
•	
•	
•	
•	
•	
•	

Power, voltage & current monitoring, ground fault,
flexible communications, motor, load & line protection
in a single package
Enhanced surge / sag withstand capacity ensures
reliable operation
Finger proof IP20 rated terminals provide extra safety by
reducing shock hazard
Adjustments to overload settings can be made without
disconnecting power
User Interface
Bright LED display
Intuitive & highly customisable parameter configuration
Remote display allows for configuration without opening the panel,
providing additional operator safety

Motor InsightE9
Voltage

Current Range

Item No.

240V ac (170 – 264)
240V ac (170 – 264)
480V ac (323 – 528)

2 – 9 Amps
20 – 90 Amps
2 – 9 Amps

480V ac (323 – 528)
600V ac (489 – 660)
600V ac (489 – 660)

20 – 90 Amps
2 – 9 Amps
20 – 90 Amps

C441BA
C441BB
C441CA
C441CB
C441DA
C441DB

Motor Insight CT Multiplier and Wire Wrap ScheduleE9
Motor FLC

Number of Loops

Number of Conductors, Through CT
Primary

CT Multiplier, Setting

Item No.

3
2
1
0

4
3
2
1

4
3
2
1

C441_B

1
0
0
0
0

2
1
1
1
1

2
1
150 – (150:5)
300 – (300:5)
600 – (600:5)

C441_A

Current Range: 20 – 90A
5 – 22.5
6.67 – 30
10 – 45
20 – 90
Current Range: 2 – 9A
1–5
2–9
60 – 135
120 – 270
240 – 540


Underscore indicates operating voltage code required.

Operating Voltage Codes:
Code

Voltage

B
C
D

240V ac
480V ac
600V ac

eaton corporation New Zealand Product Guide

203

Power Control
Motor Control
Overload Relays
Modbus Communication Module
Description

I/O

Item No.

Modbus Communication Module
Modbus Communication Module 4IN / 2OUT
Modbus Communication Module 4IN / 2OUT

None
120V ac
240V dc

C441M
C441N
C441P

Description

I/O

Item No.

DeviceNet Communication Module
DeviceNet Communication Module

120V ac
24V dc

C441K
C441L

Description

Item No.

Remote Display Type 1

C4411

Type 3R Kit for Remote Display
(remote display not included)

C4413

Adaptive Mounting Plate

C441CMP1

Motor Control

DeviceNet Modules

Motor Insight — Accessories

204

eaton corporation New Zealand Product Guide

Power Control
Motor Control
IEC Manual Motor Protectors
Manual Motor Protectors Product Overview

XTPB Pushbutton Manual Motor Protector
PKZM01

XTPR Rotary Manual Motor Protector
PKZM0

Page

Page 244

Page 245

Operator Style

Pushbutton

Rotary

Components

8/2

FLC Range

Manual Motor Protector

Manual Motor Protector

Disconnect
Controller (manual)
Short Circuit Protection
Motor Overload Protection

Disconnect
Controller (manual)
Short Circuit Protection
Motor Overload Protection

0.1 – 25A

0.1 – 65A

SK1158GB-INT.book Seite 2 Donnerstag, 2. Oktober 2008 2:27 14

Branch Motor
Circuit Functions

System overview
Motor-protective circuit-breakers PKZM01, PKZM0, PKZM4

Motor Control

Description
Moeller type

Motor-protective circuit-breakers

Moeller SK0211-1158GB-AUS
Motor protection, transformer protection, conductor and cable protection

PKZM01
PKZM01/XTPB

Voltage
releases

PKZMO/XTPR
PKZM0

Standard auxiliary
contact
Door coupling
rotary handle

Standard
auxiliary
contact

PKZM4/XTPR
PKZM4

PKZM0
PKZMO/XTPR
Current limiter

eaton corporation New Zealand Product Guide

205

Power Control
Motor Control
IEC Manual Motor Protectors
•	
•	
•	
•	

Class 10 overload protection
Motor applications from 0.1A to 63A
Built-in heater & magnetic trip elements to protect the motor
Adjustment dial for setting motor FLC

Motor Control

Pushbutton Manual Motor Protectors
E9

Motor Protective Device with Thermal and Magnetic Trip

Rated
Uninterrupted
Current —
Iu = Ie (Amps)

FLC
Adjustment
Range /
Overload
Release —
Ir (Amps)

Maximum Motor Ratings

Short Circuit
Release —
Irm (Amps)

Maximum kW Rating
AC-3 — P (kW)
3-Phase

220 –
240V

380 –
415V

440V

500V

660 –
690V

Screw Terminals
Eaton Item No.

—
—
0.06

—
0.06
0.09

—
0.06
0.12

—
0.06
0.12

0.06
0.12
0.18

XTPBP16BC1
XTPBP25BC1
XTPBP40BC1
XTPBP63BC1

PKZM01-0,16
PKZM01-0,25 PKZM01-0,4
PKZM01-0,63

Moeller Item No.

Frame B
0.16
0.25
0.4

0.1 – 0.16
0.16 – 0.25
0.25 – 0.4
0.4 – 0.63

2.2
3.5
5.6
8.8

0.09

0.12

0.18

0.25

0.25

1
1.6
2.5
4

0.63 – 1
1 – 1.6

0.12
0.25
0.37
0.75

0.25
0.55
0.75
1.5

0.25
0.55
1.1
1.5

0.37
0.75
1.1
2.2

0.55
1.1
1.5
3

XTPB001BC1
XTPB1P6BC1

PKZM01-1
PKZM01-1,6

1.6 – 2.5
2.5 – 4

14
22
35
56

XTPB2P5BC1
XTPB004BC1

PKZM01-2,5
PKZM01-4

6.3
10
12

4 – 6.3
6.3 – 10
8 – 12

88
140
168

1.1
2.2
3

2.2
4
5.5

3
4
5.5

3
4
5.5

4
7.5
11

XTPB6P3BC1
XTPB010BC1
XTPB012BC1

PKZM01-6,3
PKZM01-10
PKZM01-12

16
20
25

10 – 16
16 – 20
20 – 25

224
280
350

4
5.5
5.5

7.5
9
12.5

9
11
12.5

9
12.5
15

12.5
15
22

XTPB016BC1
XTPB020BC1
XTPB025BC1

PKZM01-16
PKZM01-20
PKZM01-25

0.63



Select manual motor protectors by full load amperes. Maximum motor ratings (kW) are for reference only.

NNote: Service Factor (SF) — Setting Ir of current scale in dependence of load factor:
	 SF = 1.15 -> Ir = 1 x In mot
	 SF = 1 -> Ir = 0.9 x In mot

206

eaton corporation New Zealand Product Guide

Power Control
Motor Control
IEC Manual Motor Protectors
Rotary Manual Motor Protectors
E9

Motor Protective Device with Thermal & Magnetic Trip	
Maximum Motor Ratings
Maximum kW Rating
AC-3 — P (kW)
Short Circuit
Release —
Irm (Amps)

3-Phase

220 –
240V

380 –
415V

440V

500V

660 –
690V

Eaton Item No.

Moeller Item No. 

Frame B
0.16
0.25
0.4
0.63

0.1 – 0.16
0.16 – 0.25
0.25 – 0.4
0.4 – 0.63

2.2
3.5
5.6
8.8

—
—
0.06
0.09

—
0.06
0.09
0.12

—
0.06
0.12
0.18

—
0.06
0.12
0.25

0.06
0.12
0.18
0.25

XTPRP16BC1
XTPRP25BC1
XTPRP40BC1
XTPRP63BC1

PKZM0-0,16
PKZM0-0,25
PKZM0-0,4
PKZM0-0,63

1
1.6

14
22

0.12
0.25

0.25
0.55

0.25
0.55

0.37
0.75

0.55
1.1

2.5
4

0.63 – 1
1 – 1.6
1.6 – 2.5
2.5 – 4

35
56

0.37
0.75

0.75
1.5

1.1
1.5

1.1
2.2

1.5
3

XTPR001BC1
XTPR1P6BC1
XTPR2P5BC1
XTPR004BC1

PKZM0-1
PKZM0-1,6
PKZM0-2,5
PKZM0-4

6.3
10
12
16

4 – 6.3
6.3 – 10
8 – 12
10 – 16

88
140
168
224

1.1
2.2
3
4

2.2
4
5.5
7.5

3
4
5.5
9

3
4
5.5
9

4
7.5
11
12.5

XTPR6P3BC1
XTPR010BC1
XTPR012BC1
XTPR016BC1

PKZM0-6,3
PKZM0-10
PKZM0-12
PKZM0-16

20
25
32

16 – 20
20 – 25
25 – 32

280
350
448

5.5
5.5
7.5

9
12.5
15

11
12.5
15

12.5
15
22

15
22
30

XTPR020BC1
XTPR025BC1
XTPR032BC1

PKZM0-20
PKZM0-25
PKZM0-32

16
25
32
40

10 – 16
16 – 25
25 – 32
32 – 40

224
350
448
560

4
5.5
7.5
11

7.5
12.5
15
20

9
12.5
17.5
22

9
15
22
24

12.5
22
22
30

XTPR016DC1
XTPR025DC1
XTPR032DC1
XTPR040DC1

PKZM4-16
PKZM4-25
PKZM4-32
PKZM4-40

50
58
65

40 – 50
50 – 58
55 – 65

700
812
882

14
17
18.5

25
30
34

30
37
37

30
37
45

45
55
55

XTPR050DC1
XTPR058DC1
XTPR063DC1

PKZM4-50
PKZM4-58
PKZM4-63

Motor Control

Rated
Uninterrupted
Current —
Iu = Ie (Amps)

FLC
Adjustment
Range /
Overload
Release —
Ir (Amps)

Frame D



Select manual motor protectors by full load amperes. Maximum motor ratings (kW) are for reference only.

NNote: Service Factor (SF) — Setting Ir of current scale in dependence of load factor:
	 SF = 1.15 -> Ir = 1 x In mot
	 SF = 1 -> Ir = 0.9 x In mot.


Eaton Rotary Manual Motor Protectors include a padlockable handle. Moeller PKZM0 & PKZM4 handles are not padlockable. Order part no. AK-PKZ0 handle if a lockable handle is required.

Lockable Rotary Handle for Moeller MMPsE9
For use with

Moeller Item No.

PKZM0 & PKZM4

AK-PKZ0

eaton corporation New Zealand Product Guide

207

Power Control
Motor Control
Electronic Motor-protective circuit-breaker PKE

Selection overview (available Q4 2010)

Switch & protect motors up to 65 A with electronic wide-range
overload protection. Modular design. Highest level of flexibility.
Highest level of performance.
The selection of a suitable motor-protective circuit-breaker is decisive for the functional
safety & service life of a motor. Motor-protective circuit-breakers PKE with electronic
overload protection offer an interesting alternative to the bimetal solution here &
complement the intelligent PKZ series from Moeller. The motor-protective circuit-breaker
PKE provides the highest level of flexibility featuring a compact & modular design with
plug-in control unit for motor currents up to 65 A.

Motor Control

The large current setting ranges decisively reduce the number of variants & minimise the
engineering work & costs accordingly.

PKE features & benefits:
•	 Autonomous supply via current transformer
•	 Large electronically controlled setting range
•	 Exchangeable control units
•	 Tripping classes greater than CLASS 10
•	 Precise & extremely long-time stable tripping characteristic curves
•	 Minimum heat losses
•	 Protection suited to individual starting conditions
•	 Motor starter design with standard components
•	 Common range of accessories from system PKZ0/XTPR
•	 Parameter data read out options
•	 Very service friendly
•	 Reduction of engineering time & costs
•	 Advanced control unit includes a COM interface for SmartWire

3 base units + 5 control units = current range up to 65A
PKE 12, 12A (45 mm)

PKE 32, 32A (45 mm)

0.3A
12A
0.09 - 5.5 kW (400 V)

PKE 65, 65A (55 mm)

3A
32A
1.5 - 15 kWa (400 V)

8A
65A
4 - 34 kW (400 V)

5 plug-in control units up to 65 A in 2 versions.

Standard	Extended
0.3A

1.2A

	1A
		3A

4A
12A

			 8A
				16A

208

32A

65A

eaton corporation New Zealand Product Guide

Motor
rating
kW

Rated motor
current AC-3
240V

415V

A

A

Overload
release
setting range

Base unit

Control unit
Standard

Control unit
Advanced
(with COM
interface)

0.3 ... 1.2 A

PKE12

PKE-XTU-1,2

PKE-XTUA-1,2

1 ... 4 A

PKE12

PKE-XTU-4

PKE-XTUA-4

3 ... 12 A

PKE12

PKE-XTU-12

PKE-XTUA-12

8 ... 32 A

PKE32

PKE-XTU-32

PKE-XTUA-32

Motor-protective
circuit-breaker,
Coordination type
“1” & “2”
0.06

0.37

-

0.09

0.54

0.31

0.12

0.72

0.41

0.18

1.04

0.6

0.25

-

0.8

0.37

-

1.1

0.18

1.04

-

0.25

1.4

-

0.37

2

1.1

0.55

2.7

1.5

0.75

3.2

1.9

1.1

-

2.6

1.5

-

3.6

0.75

3.2

-

1.1

4.6

-

1.5

6.3

3.6

2.2

8.7

5

3

11.5

6.6

4

-

8.5

5.5

-

11.3

2.2

8.7

-

3

11.5

-

4

14.8

8.5

5.5

19.6

11.3

7.5

26.4

15.2

11

-

21.7

15

-

29.3

Power Control
Motor Control
IEC Manual Motor Protectors Accessories
Auxiliary ContactsE9
Contact Configuration

Eaton Item No.

Moeller Item No.

XTPAXSA11

NHI11-PKZ0

1NO-1NC

XTPAXFA11

NHI-E-11-PKZ0

Trip indicating aux. contact

XTPAXSATR20
XTPAXSATR02

AGM2-10-PKZ0
AGM2-01-PKZ0

Side-Mount
1NO-1NC
Front-Mount

E9

Description

Eaton Item No.

Moeller Item No.

Rotary Handle Mechanism IP65 Black — For use on main switches to IEC / EN 60204.

XTPAXRHMB

PKZ0-XH

Rotary Handle Mechanism IP65 Red / Yellow — For use on main switch with Emergency-Stop function to IEC / EN 60204.

XTPAXRHMRY

PKZ0-XRH

Rotary Handle Mechanism IP65 Black — For use on main switches to IEC / EN 60204 where XTPR is mounted 90° from
vertical.

XTPAXRHM90B

PKZ0-XH-MCC

Rotary Handle Mechanism IP65 Red / Yellow — For use on main switch with Emergency-Stop function to IEC / EN 60204
where XTPR is mounted 90° from vertical.

XTPAXRHM90RY

PKZ0-XRH-MCC

Complete Kits — Includes Handle, Shaft & Required Hardware





Motor Control

IP65 Rotary Handle Mechanism

With ON/OFF switch position & “+” (tripped), lockable with 3 padlocks, 4 – 8 mm hasp. Can be locked in the OFF position, if required.
Rotary handle mechanisms ship with door interlock disabled. See instruction publication with product for how to enable door interlock.
Not for use with XTPAXFAEM20 early-make front-mount auxiliary contact.

Shunt Release E9
Voltage

Eaton Item No.

Moeller Item No.

120 vac
240 vac
480 vac
24 DC

XTPAXSR120V60H
XTPAXSR240V60H
XTPAXSR480V60H
XTPAXSR24VDC

A-PKZ0(230V50HZ)
A-PKZ0(24VDC)

Undervoltage Release E9
Voltage

Eaton Item No.

Moeller Item No.

120 vac
240 vac
480 vac

XTPAXUVR120V60H
XTPAXUVR240V60H
XTPAXUVR480V60H

U-PKZ0(240V50HZ)
-

Sealing facility E9
Description

Eaton Item No.

Moeller Item No.

To prevent tampering with the overload release & the test
function. For use with XTPB (PKZMO & PKZM4)

XTPAXSW

PL-PKZ0

eaton corporation New Zealand Product Guide

209

Power Control
Motor Control
IEC Manual Motor Protectors Accessories
Three-Phase Commoning Links

E9

For Use with...

Qty. MMP

Length of Link
(mm)

MMP With No Side-Mounted Auxiliaries or Voltage
Releases

2

90

45

XTPAXCLKA2

B3.0/2-PKZ0

3

135

45

XTPAXCLKA3

B3.0/3-PKZ0

4

180

45

XTPAXCLKA4

B3.0/4-PKZ0

5

225

45

XTPAXCLKA5

B3.0/5-PKZ0

2

-

-

XTPAXCLKB2

B3.1/2-PKZ0

3

-

-

XTPAXCLKB3

B3.1/3-PKZ0

4

-

-

XTPAXCLKB4

B3.1/4-PKZ0

5

-

-

XTPAXCLKB5

B3.1/5-PKZ0

2

-

-

XTPAXCLKC2

B3.2/2-PKZ0

4

-

-

XTPAXCLKC4

B3.2/4-PKZ0

-

-

-

XTPAXUTS

H-B3-PKZ0

2

110

55

XTPAXCLKA2D

B3.0/2-PKZ4

3

165

55

XTPAXCLKA3D

B3.0/3-PKZ4

4

220

55

XTPAXCLKA4D

B3.0/4-PKZ4

2

-

-

XTPAXCLKB2D

B3.1/2-PKZ4

3

-

-

XTPAXCLKB3D

B3.1/3-PKZ4

4

-

-

XTPAXCLKB4D

B3.1/4-PKZ4

2

-

-

XTPAXCLKB2D

B3.2/2-PKZ4

4

-

-

XTPAXCLKB4D

B3.2/4-PKZ4

-

-

XTPAXUTSD

H-B3-PKZ4

Unit Width (mm)

Eaton Item No.

Moeller Item No.

Frame B

Motor Control

For motor-protective circuit-breaker each with an auxiliary
contact or trip-indicating auxiliary contact fitted on the right

For PKZM0-... with one auxiliary contact each & a tripindicating auxiliary contact fitted on right or a voltage
release fitted on left
Shroud for unused terminals. Protection against direct contact.
For closing off non-used connections on the three phase commoning link. B3...-PKZ0

Frame D
MMP With No Side-Mounted Auxiliaries or Voltage
Releases

For motor-protective
circuit-breakers/starters each
with an auxiliary contact or
trip-indicating auxiliary contact fitted on the right & with
a DIL1(A)M contactor

For PKZM4 with one auxiliary contact each or trip-indicating
auxiliary contact fitted on right or
a voltage release fitted on left

Shroud for unused terminals. Protection against direct contact. To cover unused terminals on three-phase commoning link
-

-

 Protected against accidental contact. B-Frame short circuit proof Ue = 690V, Iu = 63A; D-Frame short circuit proof Ue = 690V, Iu = 128A. Frame B links can be combined by rotating mounting.
Frame D links cannot be combined.
+ MMP w/1 aux. (2, 3, 4, 5 module) + trip indicating etc. for frames B & D.

Incoming Terminal for Three-Phase Commoning Link

E9

For Use with...

Eaton Item No.

Moeller Item No.

B-Frame XTPR, XTPB, PKZMO, PKZM01

XTPAXIT

BK25/3-PKZ0

 For three-phase commoning link, protected against accidental contact, Ue = 690V, Iu = 63A; for conductor cross-sections: 2.5 – 25 mm2 stranded; 2.5 – 16 mm2 flexible with ferrules, AWG 14-6.

210

eaton corporation New Zealand Product Guide

Power Control
Motor Control
IEC Manual Motor Protectors Accessories
Combination Connection Kits for Connection of Rotary MMP with IEC ContactorE9
For Use with...

Description

Eaton Item No.

Moeller Item No.

Comprised of:

XTPAXTPCB

PKZM0-XDM12

XTPAXTPCC

PKZM0-XDM32

XTPAXTPCD

PKZM4-XDM65

Non-Reversing Starters

•	 Mechanical connection element for XTPR...B
& contactor
•	 Main current wiring between XTPR...B & contactor
in tool-less plug connection
•	 Cable guidance

Use contactor auxiliary switch XTCEXFAT_.
Control cable guidance: max. 6 cables up to 2.5 mm2 external diameter or 4 cables
up to 3.5 mm2 external diameter.
XTPR...B + XTCE...C
PKZMO + DILM17-32
XTPR...D + XTCE...D
PKZM4 + DILM40-65

Comprised of:
•	 DIN-Rail adapter plate
•	 Main current wiring between XTPR & contactor

Motor Control

XTPR...B + XTCE...B
PKZMO + DILM7-15

Reversing & Star-Delta connections are available. Contact your local sales office for more information.

Insulated Enclosures for Surface MountingE9
Degree of
Protection

For Use with...

Description

Eaton Item No.

Moeller Item No.

XTPB Pushbutton Manual Motor Protectors
IP65
NEMA
3R, 4X, 12, 13

XTPB MMP Only or with: XTPAXFA...,
XTPBXFAEM20, XTPAXSA...,
XTPAXUVR..., XTPAXSR..., XTPAXCL

With actuating diaphragm

XTPBXENAS65

CI-PKZ01-G

IP65
NEMA
3R, 4X, 12, 13

XTPB MMP Only or with: XTPAXFA...,
XTPBXFAEM20, XTPAXUVR...,
XTPAXSR..., XTPAXCL

With Emergency-Stop (E-Stop)
pushbutton actuator, Red-Yellow

XTPBXENASES65

CI-PKZ01-PVT

D-Frame (10 – 65A) XTPR Rotary Manual Motor Protectors
-

-

Black

XTPAXENCSD65B

CI-K4-PKZ4-G

IP65

B-Frame XTPR Only or with:
XTPAXFA…, XTPAXSA…,
XTPAXSATR…,
XTPAXUVR…, XTPAXSR…,
XTPAXCL

With black/grey rotary handle

XTPAXENCS65B

CI-K2-PKZ0-G

With red/yellow rotary handle for use
as Emergency-Stop switches to IEC/
EN 60204

XTPAXENCS65RY

CI-K2-PKZ0-GR

D-Frame XTPR Only or with: XTPAXFA...,
XTPAXFAEM20, XTPAXSA...,
XTPAXSATR..., XTPAXUVR..., XTPAXSR...,
XTPAXCL

With red/yellow rotary handle for use as Emergency-Stop switches to
IEC / EN 60204

XTPAXENCSD65RY

CI-K4PKZ4-GR

IP65
NEMA 1, 12, 3R, 4X




Integrated terminal for PE(N) connection.

% Metric knockouts: Top ÷ bottom: M25/M32. In backplate: M25/M32. Control cable entry: M20.

MMP Enclosure Accessories (Rotary Manual Motor Protector Enclosure Padlock Attachment)E9
For Use with...

Description

Pkg. Qty.

Eaton Item No.

Moeller Item No.

XTPAXENCS65B,
XTPAXENCS65RY,

Padlocking feature. Up to 3 padlocks with
3 – 6 mm hasp thickness. For use as main switch to IEC/EN 60204.

3

XTPAXPL1 

SVB-PKZ0-CI

1

XTPAXPL2 

SVB-PKZ4-CI

XTPAXENCSD65B,
XTPAXENCSD65RY
More enclosures are available. Contact your local sales office for more information.
 Lockable in the 0-position of the XTPR manual motor protector.

eaton corporation New Zealand Product Guide

211

Power Control
Motor Control
IEC Motor Control Busbar Adapters
Busbar adapter, 3 pole
Rated operational voltage Ue = 690 V. For mounting on CU flat busbars with 60 mm interval between busbar centres, suitable for 5 mm & 10 mm busbar thickness.

Busbar adaptersE9
Rated operational
current, Ie, A

Adapter width (mm)

Adapter length (mm)

For Use with...

Item No.

25

45

200

PKZM0 + DILM7
PKZM0 + DILM9
PKZM0 + DILM12
PKZM0 + DILM15
MSC-D-0,25-M7... to
MSC-D-16-M15...

BBA0-25

32

45

200

PKZM0 + DILM17
PKZM0 + DILM25
PKZM0 + DILM32
MSC-D-16-M17... to
MSC-D-32-M32...

BBA0-32

63

55

260

PKZM4 + DILM17
PKZM4 + DILM25
PKZM4 + DILM32
PKZM4 + DILM40
PKZM4 + DILM50
PKZM4 + DILM65

BBA4L-63

63

72

260

PKZ2 + DILM7
PKZ2 + DILM9
PKZ2 + DILM12
PKZ2 + DILM15
PKZ2 + DILM17
PKZ2 + DILM25
PKZ2 + DILM32
PKZ2 + DILM40

BBA2L-63

25

90

200

PKZM0 + 2 x DILM7-01
PKZM0 + 2 x DILM9-01
PKZM0 + 2 x DILM12-01
MSC-R-0,25-M7... to MSC-R12-M12...

BBA0R-25

32

90

200

PKZM0 + 2 x DILM17-01
PKZM0 + 2 x DILM25-01
PKZM0 + 2 x DILM32-01
MSC-R-16-M17... to MSC-R32-M32...

BBA0R-32

Motor Control

For direct-on-line starters

For reversing starters

Empty module, without electrical contacts
–

45

200

–

BBA0/2TS-L

–

54

200

–

BBA4/2TS-L

9

200

–

BBA-XSM

Side mounted module, can be plugged into both sides
–

212

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Contacts for safety-relevant control functions

Integrated auxiliary switch in basic
unit to contacts in the auxiliary contact
module . Contactor with AC or DC operation,
with screw or cage clamp connections

Mirror contacts
to IEC/EN 60947-4-1, Annex F
Between the contacts within an
auxiliary contact module 

Auxiliary break contact in the
auxiliary contact module 
to the main contacts

Item No.

Integrated auxiliary break
contact  to the main
contacts. Contactor with AC or DC
operation, with screw or cage clamp
connections

Yes

Yes

No main contacts available

No main contacts available

DILA22(31)

Yes

Yes

No auxiliary break contact available

Yes

DILM7-10 to DILM32-10

Yes

Yes

Yes

Yes

DILM7-01 to DILM32-01

No auxiliary contact available

Yes

No auxiliary break contact available

Yes

DILM40 to DILM65

Not currently available

Not currently available

Not currently available

Not currently available

DILM80 to DILM150

Yes

Yes

No main contacts available

No main contacts available

DILER-22(31)

Yes

Yes

No auxiliary break contact available

Yes

DILE(E)M-10

Yes

Yes

Yes

Yes

DILE(E)M-01

Yes

Yes

No main contacts available

No main contacts available

DILR-22(31)

Yes

Yes

No auxiliary break contact available

Yes

DIL00(A)(B)M-10

Yes

Yes

Yes

Yes

DIL00(A)(B)M-01

No integrated auxiliary contact available

Yes

No integrated auxiliary contact
available

Yes

DIL0(A)M to DIL3M85

Connect 1 right & 1 left SI

DIL4M115 & DIL4M145

Yes

Motor Control

Contacts for safety-relevant control functions
Positive opening operation of the contacts
to IEC/EN 60947-5-1, Annex L.

auxiliary switch contact in series



Yes

Yes

DILM185 to DILM1000

Yes

Yes

DILH1400 to DILH2000

Currently not tested

Currently not tested

DILP160 to DILP800

Generally does not apply for combinations with early-make contacts & late-break contacts.

eaton corporation New Zealand Product Guide

213

Power Control

IEC Contactors & Starters
XT IEC Power Control

August 2006
Motor
Control

34-29

Miniature Controls

IEC
Power Control, dimensions
Dimensions
D
58
[2.28]

50
[1.97]
35
[1.38]

45
[1.77]

Motor Control

5.5 [.22]

M4

34

106
49
[4.17] [1.93]

32
[1.26]
45
[1.77]

D1
XTMC

XTMCC

D

52 [2.05]

54 [2.13]

D1

83 [3.27]

86 [3.39]

58
[2.28]
≥ 5 [.20]

Mini
with Overload
Relay
FigureContactor
34-30. Non-reversing
Mini
Contactor with Overload Relay

FigureContactor
34-27. Non-reversing Mini Contactor
Mini
62.5
[2.46]

61
[2.40]

45
[1.77]

52
[2.05]

Figure 34-31. XTMCXRSA, XTMCXVSA Mini Suppressors —
Approximate Dimensions in mm [in]
43
[1.69]
180
[7.09]
108
[4.25]

83
[3.27]

58
[2.28]

Figure 34-28.
Star-Delta
Starter Combinations
Star-Delta
Starter
Combinations

45
[1.77]

45
[1.77]

69
[2.72]

Figure 34-32. XTMCXTSA Mini Sealable Shroud — Approximate
Dimensions in mm [in]

61
[2.40]
108
[4.25]

58
[2.28]

90
[3.54]

90
[3.54]

94
[3.70]

63
[2.48]

Reversing
Mini
Contactor
Figure 34-29.
Reversing
Mini Contactor

58
[2.28]

90
[3.54]

94
[3.70]

Figure 34-33. XTMCXML Mechanical Interlock — Approximate
Dimensions in mm [in]

CA08102001E

214

For more information visit: www.EatonElectrical.com

eaton corporation New Zealand Product Guide

34

4 x M4 Dia.
68
[2.68]

18
[.71]

60 [2.36]

45
[1.77]

34-82

Power Control

IEC Contactors & Starters
XT
8.7 IEC
[.34] Power Control
Typ.

Auxiliary
Type

3.2 [.13]
6.5 [.26]

5.1 [.20]

Contactors and Starters

75 [2.95]

45 [1.77]

C

XTCEXFAC_

117 [4.61]

XTCEXFCC_

117 [4.61]

Motor Control

35 [1.38]

August 2006

XTCEXFATC_ 125 [4.92]

C

Dimensions
IEC
Power Control, dimensions
Figure 34-44. Frame B, XTCE007B – XTCE015B Contactors with Screw Terminals (7 – 15A) — Approximate Dimensions in mm [in]
XTCE Contactors
36 [1.42]

26.4
[1.04]

68
[2.68]

4 x M4 Dia.
4 x M4 Dia.

68
18 52.3 [2.68]
[2.06]
[.71]
45
[1.77]

60 [2.36]
60 [2.36]

1.8
[.07]
1.8
[.07]
5.1 [.20]

8.7 [.34]
Typ.
8.7 [.34]
Typ.

3.2 [.13]

Auxiliary
Type

6.5 [.26]
3.2 [.13]
6.5 [.26]75 [2.95]
75 [2.95]

5.1[1.77]
[.20]
45

125.2 [4.93]
C

45 [1.77]

C

XTCEXFAC_

117 [4.61]

XTCEXFCC_

117 [4.61]

35 [1.38]
35 [1.38]

XTCEXFATC_ 125 [4.92]

Motor Control

34

Figure
34-44.
Frame
– –XTCE015B
Contactors
with
Screw
Terminals
(7 –(715A)
Dimensions
in mm [in]
Frame
B, XTCE007B
- XTCE015B
(DILM7-DILM15)
Contactors
- 15A)
Figure
34-45.
Frame B,
B, XTCE007B
XTCEC007B
XTCEC012B
Contactors
with
Spring
Cage Terminals
(7—– Approximate
12A) — Approximate
Dimensions
in mm [in]

71 68
26.4[2.80][2.68]
38 [1.04]
[1.50]
52.3 85
[3.46]
60.4[2.06]
[2.38]

4 x M4 Dia.
2 x M4 Dia.
60 [2.36]
75 [2.95]

4.5 [.17]
8.7 [.34]
Typ.
6.4
[.25]
11.6
[.46]

1.8
[.07]
1.8
[.07] 4.8 [.19]
5.1
[.20]
10.6
[.42]
45 [1.77]

3.2 [.13]
6.5 [.26]

35 [1.38]

4.5 [.17]
75 [2.95]
6.5 [.26]

17.7 [.70]

125.2 [4.93]
97.4 [3.83]

35 [1.38]
138.7 [5.46]
11.6
Figure 34-45. Frame
B, XTCEC007B – XTCEC012B Contactors with Spring Cage Terminals (7 – 12A) — Approximate Dimensions in mm [in]
[.46]
Note: Sideways distance to grounded parts: 6 mm [.39 in]
45 [1.77]

IEC Contactors & Starters
XT IEC Power Control

34-83

August
2006
Figure
34-46.
Frame C, XTCE018C
– XTCE032C (DILM17-DILM32)
Contactors (18 – 32A) —Contactors
Approximate Dimensions
in mm [in]
Frame
C, XTCE018C
- XTCE032C
(18 - 32A)

Contactors and Starters

38
[1.50]

For more information visit: www.EatonElectrical.com

71
[2.80]

60.4
[2.38]

CA08102001E
2 x M4 Dia.

85
[3.46]

4 x M4 Dia.

75 [2.95]

4.5 [.17]
6.4
[.25]

11.6
[.46]

10.6
[.42]

104
[4.09]
57
4.8 [.19]
[2.24]
17.7 86.4
[.70]
[3.40]

34

105 [4.13]

4.5 [.17]
6.5 [.26]
97.4 [3.83]

35 [1.38]

138.7 [5.46]

11.6
[.46]
45 [1.77]

Note: Sideways distance to grounded parts: 6 mm [.39 in]

Figure 34-46. Frame C, XTCE018C – XTCE032C Contactors (18 – 32A) — Approximate Dimensions in mm [in]
45 [1.77]

4.7 [.19]

34.4 [1.35]

For more
information visit: www.EatonElectrical.com
6.9 [.27]

55 [2.17]

113.8 [4.48]
132.1 [5.20]
146.8 [5.78]

CA08102001E
Note: Sideways distance to
grounded parts: 6 mm [.39 in]

Frame
D, Frame
XTCE040D
- XTCE065D
(DILM40-DILM65)
Contactors
(40 - 65A)
Figure
34-47.
D, XTCE040D
– XTCE065D Contactors
(40 – 65A) — Approximate
Dimensions
in mm [in]

90 [3.54]
111 [4.37]

156 [6.14]

156 [6.14]

170 [6.69]

57 [2.24]
76.5 [3.01]

4 x M6 Dia.

82.5 [3.25]
85.5 [3.37]
142 [5.59]
160 [6.30]

70 [2.79]

Note: Sideways distance to
grounded parts: 10 mm [.39 in]

Figure
34-48.
F – G, XTCE080F
– XTCE150G Contactors
(80 – 150A) — Approximate
Dimensions
in mm [in]
Frame
F - Frame
G, XTCE080F
- XTCE150G,
(DILM80-DILM150)
Contactors
(80 - 150A)

eaton corporation New Zealand Product Guide

215

Power Control
Motor Control
34-86 IEC Contactors & Starters
XT IEC Power Control
34-84 IEC Contactors & Starters
and
Starters
XT IECControl,
Power
Control
IECContactors
Power
dimensions

June 2008
August 2006

Contactors and Starters
W1
W
W1
11 [.43] Dia.
W
11 [.43] Dia.

34
34

M6 Dia.
M6 Dia.

H2

H3

H1 H

H2

H3

Motor Control

H1 H

W3
W4

W3

D1

D
140 [5.51]

W4

Frame L
(185 – 250A)

W2

D1
140 [5.51]

D

W

W1

W2

W3

W4

H

140 [5.51]

160 [6.30]

120 [4.72]

20 [.79]

48 [1.89]

180 [7.09]

W
W1
W2
W3
Frame M
160 [6.30] 180 [7.09] 130 [5.12] 25 [.98]
Frame
L
140 [5.51] 160 [6.30] 120 [4.72] 20 [.79]
(300A
– 400A)
(185 – 250A)
Frame M
160 [6.30] 180 [7.09] 130 [5.12] 38 [1.50]
(500A)

8 [.31]

W2

H1

8 [.31]
H2

H3

D

D1

164 [6.46]

189 [7.44]

160 [6.30]

208 [8.19]

5 [.20]

W4
H
H1
H2
H3
D
D1
48 [1.89]
200 [7.87] 184 [7.24] 209 [8.23] 180 [7.09] 216 [8.50] 6 [.24]
48 [1.89]
180 [7.09] 164 [6.46] 189 [7.44] 160 [6.30] 208 [8.19] 5 [.20]
57 [2.24]

200 [7.87]

189 [7.44]

219 [8.62]

180 [7.09]

216 [8.50]

6 [.24]

Frame L - M, XTCS185L - XTCS570M (DILM185-DILM500) Contactors (185 - 500A)

Figure
34-49.
Frame
L –L M,
XTCE185L
– XTCE500M
Contactors
(185
– 500A)
——
Approximate
Dimensions
inin
mm
[in]
Figure
34-49.
Frame
– M,
XTCE185L
– XTCE500M
Contactors
(185
– 500A)
Approximate
Dimensions
mm
[in]
AA
Dia.
Dia.
M6
M6
Dia.
Dia.

232
232
[9.13]
[9.13]

215
215
[8.46]
[8.46]

256
256 H H
[10.08]
[10.08]

165
[6.50]
165
[6.50]
8080
WW
[3.15]
[3.15]
250
[9.84]
250
[9.84]
270
[10.63]
270
[10.63]

D1D1
140
[5.51]
140
[5.51]
232
[9.13]
232
[9.13]

Moeller

W
H H
D1 D1
W
H
D1
DILM580
XTCE580N
35 [1.38]
286 [11.26]
6 [.24]
XTCE580N
35 [1.38]
286 [11.26]
6 [.24]
XTCE580N
35
[1.38]
286
[11.26]
66 [.24]
[.24]
DILM650
XTCE650N
286 [11.26] 6 [.24]
XTCE650N
35 [1.38]35 [1.38]286 [11.26]
XTCE650N
[1.38]
286
[11.26] 6 [.24]
6 [.24]
XTCE750N
4535
[1.77]
296
[11.65]

AA(Dia.)
(Dia.)

XTCE750N
[1.77]
296
[11.65] 6 [.24]
6 [.24]
XTCE820N
4545
[1.77]
296
[11.65]
DILM820
45 [1.77] 296
296[11.65]
[11.65]
XTCE820N XTCE820N
[1.77]
66 [.24]
[.24]
XTCEC10N
4545
[1.77]
296 [11.65]
10 [.40]
XTCEC10N XTCEC10N
45 [1.77]
1010[.40]
DILM1000
45 [1.77] 296
296[11.65]
[11.65]
[.40]

13.5
[.53]
13.5
[.53]
13.513.5
[.53][.53]
13.5 [.53]

DILM750

Eaton W

XTCE750N

45 [1.77]

296 [11.65]

6 [.24]

(Dia.)
11 A
[.43]
11 [.43]

[.43]
11
[.43]
1111
[.43]
11 [.43]

13.5[.53]
[.53]
13.5

13.513.5
[.53][.53]

Figure
34-50.
Frame
N,N,
XTCE580N
– XTCEC10N
Contactors
(580
– 1000A)
—
Approximate
inin
mm
[in]
Frame
N, XTCE580N
-XTCE580N
XTCEC10N
(DILM580-DILM1000)
Contactors
(580
- 1000A) Dimensions
Figure
34-50.
Frame
– XTCEC10N
Contactors
(580
– 1000A)
—
Approximate
Dimensions
mm
[in]

For more information visit: www.eaton.com
For more information visit: www.EatonElectrical.com

216

eaton corporation New Zealand Product Guide

CA08102001E
CA08102001E

Power Control
IEC Contactors & Starters
XT IEC Power Control

August 2006

Motor Control

34-85

Contactors and Starters

IEC Power Control, dimensions

M6 Dia.

210
342
[8.27]
[13.46]
232
256
[9.13]
[10.08]

215
[8.46]

34

308
[12.13]

60
[2.36]
100
[3.94]

14 [.55]
Dia.
100
[3.94]

130 [5.12]

Motor Control

165 [6.50]
10
[.39]

232 [9.13]

260 [10.24]
Frame 34-51.
P, XTCEC14P
AC-1)
Figure
Frame P,Contactor
XTCEC14P(1400A,
Contactor
(1400A, AC-1) — Approximate Dimensions in mm [in]

210
[8.27]

392
[15.43]
300
272
[11.81]
10.71]
352
[13.86]

150 [5.91]
40
[1.57]
80 [3.15]

40
[1.57]
80 [3.15]

150 [5.90]

125 [4.92]

14 [.55]
Dia.

172.5 [6.79]

10 [.39]

252 [9.92]

172.5 [6.79]

515 [20.28]
M6 Dia.

270
[10.63]

430 [16.93]

Figure
Frame R, XTCEC20R
XTCEC16R, XTCEC20R
Frame 34-52.
R, XTCEC16R,
ContactorsContactors — Approximate Dimensions in mm [in]

CA08102001E

For more information visit: www.EatonElectrical.com

eaton corporation New Zealand Product Guide

217

Power Control

IEC Contactors & Starters
XT IEC Power Control
Overload Relays — XTOB, XTOT34-100

Motor Control
August 2006

IEC Power Control, dimensions

Dimensions

34-99
IEC Contactors & Starters
XT IEC Power Control
Overload Relays — XTOB, XTOT

99 [3.90]
80 [3.15]

73 [2.87]

34

35.5
[1.40]

29.5
39.5 [1.16]
[1.56]

48
[1.89]

34

138
[5.43]
74
[2.91]

65 [2.56]
83 [3.27]

Motor Control

45 [1.77]

Figure
Frame
B – C, XTOB…BC1
and XTOB…CC1
OverloadOverload
Relays — Relays
Frame34-77.
B - C,
XTOB...BC1
& XTOB...CC1
(ZB12-ZB32)
Approximate Dimensions in mm [in]
51.5
[2.03]

20.3
[.80]

63 [2.48]
129 [5.08]
134 [5.28]

95 [3.74]
100 [3.94]
118 [4.65]

Figure 34-80.
Frame
F – G, XTOB…GC1
Overload
Relay —
Approximate Dimensions in mm [in]
Frame
F – G,
XTOB…GC1
(ZB150)
Overload
Relay

100 [3.94]

79.2
[3.12]
121
[4.76]
74
[2.91]

95.5 [3.76]
102 [4.02]

60 [2.36]

Figure
Frame D, XTOB…DC1
Relay
— Approximate Dimensions in mm [in]
Frame34-78.
D, XTOB...DC1
(ZB65)Overload
Overload
Relays

95 [3.74]
99 [3.90]
118 [4.65]

63 [2.48]
129 [5.08]
134 [5.28]

Figure 34-81.
Frame
F – G, XTOB…G1CS
Overload Relay
— Approximate
Dimensions
in mm
[in]
Frame
F – G,
XTOB…G1CS
(ZB150-.../KK)
separate
mounted
Overload
Relay

D1
42.5
[1.67]
H

5 [.20]

D2
16.5 [.65]

D

W

Moeller

Eaton

HH

W

W

D

D

D1

D1D2

D2

ZB32-XEZ

XTOB…CC1 8585
[3.46] 45 [1.77]
45 [1.77]
90.5 58.3
[3.56][2.30]58.3
XTOB…CC1
[3.46]
90.5 [3.56]
3.8[2.30]
[.15]

3.8 [.15]

ZB65-XEZ

XTOB…DC1
[3.39]
112 [4.41]112 [4.41]
80.5 [3.17]80.5
4.7[3.17]
[.19]
XTOB…DC1 8686
[3.39] 60 [2.36]
60 [2.36]

4.7 [.19]

Figure
Frame
B – C, XTOBXDINC
DIN or
RailPanel
or Panel
MountAdapter
Adapter and
Frame D,D,
Frame34-79.
B - C,
XTOBXDINC
DIN Rail
Mount
& Frame
XTOBXDIND
DIN Rail or Panel Mount Adapter — Approximate Dimensions in mm [in]
XTOBXDIND DIN Rail or Panel Mount Adapter

CA08102001E

218

For more information visit: www.EatonElectrical.com

eaton corporation New Zealand Product Guide

For more information visit: www.EatonElectrical.com

Power Control
AugustPower
2006
IEC

Control, dimensions

Motor Control

IEC Contactors & Starters
XT IEC Power Control

34-101

Overload Relays — XTOB, XTOT

110 [4.33]
121 [4.76]

144 [5.67]

96 [3.78]

111 [4.37]

48 [1.89]

34
74
[2.91]

5*
25 [.20]
[.98]
128 [5.04]

94
[3.70]

169
[6.65]

7 [.28]

Motor Control

**
*

144
[5.67]

7 [.28] Dia.
16.5 **
[.65]

* = OFF
** = RESET/ON

11 [.43] Dia.

Figure 34-82.
Frame L, XTOB…LC1
Overload Relay
— Approximate
Frame
L, XTOB…LC1
(Z5-.../FF250)
Overload
Relay Dimensions in mm [in]

Current Transformer Operated Overload Relay
185 [7.28]
8 [.31]

4.3 [.17]

185 [7.28]

1.5 [.06]

7.5 [.30]
21 [.83]

*

85
55
[2.17] [3.35]

71 44 [1.73] 33
[2.80]
[1.30]

44
[1.73]

M4

26 [1.02]

55
[2.17]

26
[1.02]

*

159 [6.26]
172 – 250
[6.77 – 9.84]

* = RESET/ON

200 [7.87]
65
[2.56]

65
[2.56]
71
[2.80]

90°

90°

IEC Contactors & Starters
XT IEC Power Control

27
[1.06]

August 2006

90°

34-105

Overload Relays — C396

Figure
34-83. XTOT…C3S
Dimensions
XTOT…C3S
(ZW7) — Approximate Dimensions in mm [in]

Mounting Holes for
#6 or M4 Screws
(2 Qty.)

91.5
[3.60]

34
82.0
[3.23]

59.5
[2.34]

CA08102001E

39.1
[1.54]

For more information visit: www.EatonElectrical.com

40.0
[1.57]

4.5 5.0
[.18] [.20]

23.8
[.94]

86.5
[3.41]

49.0
[1.93]

Figure
34-84.
45 mm Stand-Alone
C396
Electronic Overload
Relay
— Approximate Dimensions in mm [in]
45 mm
Stand-Alone
C396
Electronic
Overload
Relay
Mounting Holes for
#10 or M5 Screws
(4 Qty.)
.8
[.03

41.9
[1.65]

114.0
[4.49]

4.1
[.16]

6.1
[.24]
63.5
[2.50]
108.7
[4.28]

.8
[.03]

40.4
[1.59]

1.5
[.06]

119.9
[4.72]

65.0
[2.56]

Figure
34-85.
65 mm Stand-Alone
C396
Electronic Overload
Relay
— Approximate Dimensions in mm [in]
65 mm
Stand-Alone
C396
Electronic
Overload
Relay

eaton corporation New Zealand Product Guide

219

Power Control
Motor Control
34-106 IEC Contactors & Starters
XT IEC Power Control

August 2006

IEC Overload
PowerRelays
Control,
— C396dimensions

96.5
[3.80]

34

154.9
[6.10]

Mounting
Holes for
#10 or M5
Screws
(4 Qty.)

6.4
[.25]

31.9
[1.25]

47.9
[1.89]

1.0
[.04]

Motor Control

1.5
[.06]
94.0
[3.70]

94.0
[3.70]

217.0
[8.54]

3.0
[.12]

4.0
[.16]

96.5
[3.80]

153.7
[6.05]

110.0
[4.33]

110 mm
Stand-Alone
C396 Electronic
Overload
Relay
Figure
34-86.
110 mm Stand-Alone
C396 Electronic
Overload
Relay — Approximate Dimensions in mm [in]
8.4
[.33]

8.4
[.33]

8.7
[.34]

20.0
[.79]

2.0
[.08]

85.3
[3.36]

77.5
[3.05]

45.0
[1.77]

8.7
[.34]

82.4
[3.24]

August 2006

20.0
[.79]

3.0
[.12]

85.8
[3.38]

77.5
[3.05]

IEC Contactors & Starters
45.0
XT IEC Power Control [1.77]

34-107

82.4
[3.24]

Figure
34-87.
45 mm
(0.1 Direct
– 8A) Direct
Connect
XT
Frame BRelays — C396
Figure
34-88.
45 mm
C396
(6.4 –Direct
32A) Direct
Connect
XT Frame B
45 mm
C396
(0.1C396
– 8A)
Connect
totoXT
45 mm
C396
(6.4
– 32A)
Connect
totoXT
Overload
Contactor
Approximate Dimensions in mm [in]
Contactor
Approximate Dimensions in mm [in]
Frame B —
Contactor
Frame B —
Contactor
12.1
[.48]
2.0
[.08]

12.5
[.49]

14.6
[.57]
3.0
[.12]

20.0
[.79]

89.7
[3.41]

77.5
[3.05]

45.0
[1.77]

15.0
[.59]

20.0
[.79]

85.8
[3.38]

73.8 70.0
[2.91] [2.76]

82.4
[3.24]

45.0
[1.77]

34

80.0
[3.15]

For more information visit: www.EatonElectrical.com
CA08102001E
Figure
34-91.
45 mm
C396
(6.4 – 45A)
Direct
Connect to
Frame D
Figure
34-89.
45 mm
C396
(0.1 –Direct
8A) Direct
Connectto
to XT
45
mm
C396
(0.1
– 8A)
Connect
XTFrame C
45
mm
C396
(6.4
– 45A)
Direct
Connect
toXT
XT
ContactorD—
Approximate Dimensions in mm [in]
Contactor
Approximate Dimensions in mm [in]
Frame
C—
Contactor
Frame
Contactor
12.1
[.48]
3.0
[.12]

12.5
[.49]

3.0
[.12]

55.6
[2.19]

7.0
[.28]

106.0
[4.17]
96.0
[3.78]

82.4
[3.24]

Figure
34-90.
45 mm
C396
(6.4 – 32A)
Direct
Connect to
to XT
45
mm
C396
(6.4
– 32A)
Direct
Connect
XTFrame C
Contactor
Approximate Dimensions in mm [in]
Frame
C—
Contactor

220

17.6
[.69]

87.2
[3.43]

77.5
[3.05]

45.0
[1.77]

17.6
[.69]

20.0
[.79]

eaton corporation New Zealand Product Guide

65.0
[2.56]

106.0
[4.17]

Figure
34-92.
65 mm
(15 – 75A)
Direct
Connect to
to XT
Frame D
65
mm
C396
(15C396
– 75A)
Direct
Connect
XT
ContactorD—
Approximate Dimensions in mm [in]
Frame
Contactor

Power Control
34-108

Motor Control

IEC Contactors & Starters
XT IEC Power Control

August 2006

IECOverload
Power
Control,
Relays
— C396 dimensions
73.8
[2.91]
13.8
[.54]

3.0
[.12]

74.3
[2.93]

34
103.4
[4.07]

108.0
[4.25]

Motor Control

65.0
[2.56]

Figure
34-93.
65 mm(22
C396–(22
– 110A)
Direct Connect
to XTtoFrame
– G Contactor
Approximate Dimensions in mm [in]
65 mm
C396
110A)
Direct
Connect
XT FFrame
F – G—Contactor
110.0
[4.33]
98.0
[3.86]
29.9
[1.18]
29.9
[1.18]

4.0
[.16]

77.8
[3.06]

201.0
[7.91]

93.0
[3.66]

34-166

226.3
[8.91]

IEC Contactors & Starters
49.0
49.0
XT IEC Power Control
[1.93]
[1.93]
Manual Motor Protectors

August 2006

151.7
[5.97]

128.0
[5.04]

Figure
34-94. 110 mm C396 (30 – 150A) + C396CBARXT Direct Connect to XT Frame G Contactor — Approximate Dimensions in mm [in]
Dimensions
110 mm C396 (30 – 150A) + C396CBARXT Direct Connect to XT Frame G Contactor

34

93
[3.66]

XTPAXFA _

XTPAXFA _

XTPAXFA _

93
[3.66]

45
[1.77]

45
[1.77]

For more information visit: www.EatonElectrical.com

45
[1.77]

5.5
[.22]

44
[1.73]

CA08102001E

50
[1.97]

45
[1.77]

74 [2.91]
85 [3.35]

XTPAXFA _

88 [3.46]
94 [3.70]

Figure
34-107.
Manual
Motor Protectors
— XTPB(PKZM01)
(Approximate
Manual
Motor
Protectors
— XTPB
Dimensions in mm [in])

Figure
34-108.
ManualProtectors,
Motor Protectors,
ManualTransformer
Transformer
Manual
Motor
Manual
Protectors
— XTPR…B,
XTPT andXTPT
XTPM (Approximate
Dimensions in
Protectors
— XTPR…B,
& XTPM (PKZM0)
mm [in])

4 [.16]

140
[5.57]

65
45 [2.56] 125
[4.92]
[1.77]

XTPAXFA _

130
[5.12]

30
[1.18]
55 [2.17]

XTPAXFA _

7.5 [.30]
118 [4.65]
127 [5.00]
145 [5.71]
171 [6.73]

Figure
34-109.
Manual
Motor Protector
XTPR…DC1 (Approximate
Manual
Motor
Protectors
——
XTPR...DC1
(PKZM4) Dimensions in mm [in])
45
[1.77]
28
[1.10]

80 [3.15]

*

eaton corporation New Zealand Product Guide

221

Power Control
Motor Control

IEC Contactors & Starters
XT IEC Power Control

IEC Power Control, dimensions
August 2006

34-167

Manual Motor Protectors

261 [10.28] (207 [8.15],
153 [6.02], 99 [3.90])
45
90
[1.77] [3.54]

36
[1.42]

54
[2.13]

Motor Control

9
[.35]

26
[1.02]

27
[1.06]

34

Overlapping Mounting
to Extend the Three-Phase
Commoning Link

68 [2.68]
Standard
Auxiliary
Contact
— XTPAXSA…NHI11
Figure 34-112.
Standard
Auxiliary
Contact — XTPAXSA…

Three-Phase
— XTPAXCLKB5,
Figure 34-116.Commoning
Three-PhaseLink
Commoning
Link — XTPAXCLKB5,
XTPAXCLKB4, XTPAXCLKB3, and XTPAXCLKB2

(Approximate Dimensions in mm [in])

XTPAXCLKB4, XTPAXCLKB3, and XTPAXCLKB2 (Approximate
Dimensions in mm [in])
234 [9.21] (108 [4.25])

45
90
[1.77] [3.54]

36
[1.42]

63
[2.48]
26
[1.02]

9
[.35]

27
[1.06]

Figure 34-117.Commoning
Three-PhaseLink
Commoning
Link — XTPAXCLKC4,
Three-Phase
— XTPAXCLKC4,
XTPAXCLKC2

68 [2.68]

XTPAXCLKC2 (Approximate Dimensions in mm [in])

Trip
Indicating
Auxiliary
Contact
— XTPAXSATR…
Figure
34-113. Trip
Indicating
Auxiliary
Contact — XTPAXSATR…

(Approximate Dimensions in mm [in])

7.5
[.30]

73
[2.87]

45
90
[1.77] [3.54]

36
[1.42]

≤ 56
[2.20]

31
[1.22]
XTPAXLSA

48
[1.89]

≤ 41
[1.61]
18
[.71]

XTPAXIT

49
[1.93]
68 [2.68]

Undervoltage
/ Shunt Release
— XTPAXUVR…,
XTPAXSR…
Figure 34-114. Undervoltage
/ Shunt
Release — XTPAXUVR…,
(A-PKZ0,
U-PKZ0)
XTPAXSR…

Incoming
Terminal,
LineTerminal,
Side Adapter
— XTPAXIT,
Figure 34-118.
Incoming
Line Side
AdapterXTPAXLSA
— XTPAXIT,

XTPAXLSA (Approximate Dimensions in mm [in])

(Approximate Dimensions in mm [in])

180 [7.09] (90 [3.54])

27

August 2006

[1.06]
IEC
45 Contactors & Starters
[1.77]
XT IEC Power Control

34-169

Three-Phase
— XTPAXCLKA4,
XTPAXCLKA2 (B3.0/4 - PKZ0)
Figure 34-115.Commoning
Three-PhaseLink
Commoning
Link — XTPAXCLKA4,

Manual Motor Protectors

XTPAXCLKA2 (Approximate Dimensions in mm [in])

Insulated Enclosures for Surface Mounting of XTPB Manual Motor Protectors

158

[6.22] visit: www.EatonElectrical.com
For more information

CA08102001E
158
[6.22]

80 [3.15]
80 [3.15]

XTPBXENCS40
XTPBXENAS65
XTPBXENCS65

222

116.5 [4.59]

XTPBXENAS41
XTPBXENAS65

eaton corporation New Zealand Product Guide

XTPBXENCSEK65
XTPBXENASES65
XTPBXENCSES65

116.5 [4.59]
177.2 [6.98]

XTPBXENASEK65
XTPBXENASES65

34

134 [5.28]

181 [7.13]

Control
197 [7.76]
IEC Contactors & Starters Motor
XT IEC Power XTPAXENCSD65B
Control
XTPAXENCSD65RY

34-172

Manual Motor Protectors

IEC Power Control, dimensions

72
[2.83]

240
[9.45]
240
[9.45]

34

160 [6.30]
160 [6.30]

IEC Contactors & Starters
XT IEC Power Control

134 [5.28]
186 [7.32]

181 [7.13]

XTPR...B/MMP WITH XTCE...B contactor with XTPAXTPCB combination
Combination Motor Controllers
connection kit

XTPAXENCSD65RY

XTPAXENCSD65

XTPAXENCSD65B
XTPAXENCSD65RY

Figure 34-126. Insulated Enclosures for Surface Mounting of XTPR...D Manual Motor Protecto

57.5 [2.26]
To Terminals

Mounting Holes
for M4 Screws
or #8 Screws
(4 Places)

2

30
[1.18]

197 [7.76]
August 2006

Motor Control

4-186

Power Control

160 [6.30]

43 [1.69] Dia.
64
[2.52]

72
[2.83]

48
[1.89]

34
240
[9.45]
228.8 235.7
[9.01] [9.28]

210.8 [8.30]
Mounting

64
[2.52]

48
[1.89]
62
[2.44]

19.5
[.77]

At least 100 [3.94]
up to Cover Hinge
86.8
[3.42]
To Terminals

160 [6.30]

Figure
34-127. Rotary Handle Mechanism — XTPAXRHM…
Rotary Handle Mechanism — XTPAXRHM…
(Approximate Dimensions in mm [in])

9 [.35]
34
[1.34]

45.2
[1.78]

124.3
[4.89]

IEC Contactors
& Starters Combination
XTPR...B MMP with XTCE...C Contactor,
with XTPAXTPCC
Connection Kit
XT IEC Power Control
Mounting Holes for
M4 Screws or #8 Screws
(4 Places)

34-187

43 [1.69] Dia.

To Terminals

64
[2.52]

196 [7.72]

48
[1.89]

83.4 [3.28]
To Terminals

64
[2.52]

34
19.5
[.77]

48
[1.89]
62
[2.44]

228.8 235.4
[9.01] [9.27]

210.8 [8.30]
Mounting

At least 100 [3.94]
up to Cover Hinge
266 [10.47]
Mounting

284
[11.18]

86.8 [3.42] Figure 34-127. Rotary Handle
To
Terminals (Approximate Dimensions in
142.8
[5.62]
To Coil
Terminals

9 [.35]
34
[1.34]
45
[1.77]
79
[3.11]

XTPAXENCSD65

Combination Motor
Controllers
57.5
[2.26]

Mounting Holes for
M5 Screws or #10 Screws
(4 Places)

9 [.35]

28 [
30
[1.18]

Figure 34-126. Insulated Enclosures for Surface Mounting
XTPR...D Manual
Motor Protectors
For moreofinformation
visit: www.EatonElectric

Figure 34-134. XTSC…BC_ — Approximate Dimensions in mm [in]
August 2006

Mounting Depth:
100 – 240 [3.94 – 9.45]
from the top edge of
the mounting rail to the
front edge of the panel
door/cover
186 [7.32]

124.3
[4.89]

5.3
[.21]

Mechanism — XTPAXRHM…
mm [in])

For more information visit: www.EatonElectrical.

89.6
[3.53]

158.5
[6.24]

Mounting Depth:
100 – 240 [3.94 – 9.45]
from the top edge of
the mounting rail to the
front edge of the panel
door/cover

55 [2.17]

172.1 [6.78]
43.4 [1.71]
Figure 34-135. XTSR…BC_
— Approximate Dimensions in mm
To [in]
Optional Aux. Contacts
Mounting

Figure 34-136. XTSC…DD_ — Approximate Dimensions in mm [in]

For more
information visit:
www.EatonElectrical.com
XTPR...D MMP with XTCE...D
contactor,
with
XTPAXTPCD combination
connection kit
36.3 [1.43]

CA08102001E

To Terminals

209.2
[8.24]

eaton corporation New Zealand Product Guide
49.7 [1.96]

223

Power Control
Motor Control
DOL Starters
IP65 Surface Mounting Starter, fitted with Start & Stop/Reset Pushbuttons.

Motor Control

DOL StartersC10
kW(400 - 415VAC)

AC-3 Amps

Coil Voltage

Aux. Contacts

Dimensions (W x H x D) mm

Item No.

4

11

240

1NO

90 x 184 x 113

EDOL40NO240

5.5

12

240

1NO

90 x 184 x 113

EDOL55NO240

7.5

16

240

1NO

90 x 184 x 113

EDOL75NO240

11

22

240

1NO

100 x 194 x 123

EDOL11NO240

4

11

415

1NO

90 x 184 x 113

EDOL40NO415

5.5

12

415

1NO

90 x 184 x 113

EDOL55NO415

7.5

16

415

1NO

90 x 184 x 113

EDOL75NO415

11

22

415

1NO

100 x 194 x 123

EDOL11NO415

Order Overloads Separately.

Overload RelaysC10
Full Load Current (A)

Item No.

0.3 - 0.5

EDOL045TOL

0.5 - 0.7

EDOL067TOL

0.7 - 1.0

EDOL10TOL

1.0 - 1.5

EDOL15TOL

1.5 - 2.1

EDOL21TOL

2.1 - 2.7

EDOL27TOL

2.7 - 3.6

EDOL36TOL

3.5 - 5.0

EDOL50TOL

4.0 - 6.0

EDOL60TOL

5.5 - 8.5

EDOL85TOL

8.5 - 12.5

EDOL125TOL

13 - 18.0

EDOL18TOL

17.0 - 24.0

EDOL24TOL

22.0 - 30.0

EDOL30TOL

1NO/1NC Electrically Separated Auxiliary Contacts.
Single - phase sensitivity for phase imbalance & phase loss protection.
Temperature Compensated.

Spare CoilsC10
Coil Voltage (AC)

Item No.

24V

EDOLCOIL24A

32V

EDOLCOIL32A

110V

EDOLCOIL110A

240V

EDOLCOIL240A

415V

EDOLCOIL415A

480V

EDOLCOIL480A

12V

EDOLCOIL12A

Coils suit all starter sizes.

224

eaton corporation New Zealand Product Guide

Power Control
Motor Control
Contactor & Starter Assemblies
Reversing Contactors & StartersE9
Rated operational
current

Max. rating for three-phase
motors, 50 – 60 Hz

AC-3, 415 V
Ie , A

AC-3, 380/415 V
P, kW

AC-4, 380/415 V
P, kW

9

4

12
18

Individual components of the combination

AC operation  Item No.

Contactor Q11 Item No.

Contactor Q12 Item No.

2.5

DILM9-01
+ DILA-XHI20

DILM9-01
+ DILA-XHI20

DOLRS4/U(...V50HZ) 

5.5

3

DILM12-01
+ DILA-XHI20

DILM12-01
+ DILA-XHI20

DOLRS5.5/U(...V50HZ 

7.5

4.5

DILM17-01
+ DILA-XHI20

DILM17-01

Open units

Contactor combinations
15
Reversing combinations

5/11

32
Moeller SK0211-1158GB-AUS

US

40

18.5

Individual components of the combination
50

Mechanical Enclosed units
interlock
Part no.

9

Notes

Spare auxiliary contacts
22

Contactor Q11 65
NotesContactor Q12

Notes

contacts

7

Part no.

9

10

Q11
30

Q12

4

2.5

21

0

22

+

21

II

+ Part no.

64

7.563

63

22

1

13

13

54

Q11

53

Q12

22

5

3

Q12
32Q11 DILM25-01
DILM25-0114
2 4 6
54
+ DILA-XHI20
+ DILA-XHI20

Q12

3

63

Notes
4.5

+

64

53

DILM32-01
22
40
Q11
+ DILA-XHI20
21
63
63

64

3

5

2

4

6
64

9
Reversing contactors
+
10 0

21
A1

DILM40
Q11 21
+ DILM150-XHI11
0

HI11

(-)N

A2

22

Q11

+

1

3

12
5

2

4

6

Reversing
contactors
+ DILM9-01
+ DILA-XHI20 0

–DILM9-01–
Q12
+ DILA-XHI20
A2

21

54
A1

Q11
Q11

+
+



53
A2

Q12

DILM9-01
+ + DILA-XHI20 Q11
63

63

0

DILM12-01
64
+ 64 + DILA-XHI20
63
63
0II
+
+
DILM17-01
64
64
I
+ DILA-XHI20
II
63
+
+ 63
DILM25-01 Q11
64
64
I
+ DILA-XHI20

A1

64

(-)N

A2

DILM32-01
Q12 53
Q12
A2
+ DILA-XHI20
22
	
Q11
21
63
63
DILM40
+
A1
+ DILM150-XHI11
Q12
64

22

13
22 14

Q12

13
22
14
21
13
A1
22
A2
21
A1

DILM4063
–
63
+Q11
HI11 + + DILM150-XHI11
A2
(-)N
21
64
64

0 22
–
–
+
–
+ DILM65
21
HI11
+ DILM150-XHI11
II
–+

–

+
I

II

63

14
21

13

6321

63

22
22

14

64

A2

DILM65 0 2222
64
64
+ DILM150-XHI11
21 21

21
21

DILM32-01
63
+
+ DILA-XHI20 Q11

64

21

21

Q12
Q11

63

22

54
A1

63
13 22
22

63 Q12

14 64
14
14I 21
13
1363 54
13

64

22 14
64
14

64

Q11

63

Q11
Q12

Q12
Q11

64

Q12

21
13
A1

–

A2

–0

22

22

21

14

II 13

13

Q11

+
Q12

54
53

54

Q12

22
21
A1

Q11

53

14

I

22
Q11
21
A1

+

U

4

V

6

2

W

DILM32-01 Q11
(-)N
M
+
M1 DILA-XHI20
3 

I

21

II 1

W

64

Q12
63

21
A1

+

63

Q12

1

2
22

Q12

I
Q12

14

22
U V

(-)N

1

3

5

2

4

6

Q12

5

DOLRS7.5/I(...V50HZ) 

DILM25-01
+ DILA-XHI20

DOLRS11/I(...V50HZ) 

DILM32-01
+ DILA-XHI20

DOLRS15/I(...V50HZ) 

DILM40
+ DILM150-XHI11

DOLRS18.5/I(...V50HZ) 

M1

V
M
3

3

5

Q11
DILM25-01
2 4 6
+ DILA-XHI20

1

3

5

2

4

6

Q12

W

-

-

DOLRS22/I(...V50HZ) 

DILM65
+ DILM150-XHI11

DILM65
+ DILM150-XHI11

DOLRS30/I(...V50HZ) 

Q12

22

A2

54

54

Q12

22
21

6

A1

1

3

5

2

4

6

Q12

21
A1
A2

U

	

M1

V

W

M
3

22
21
13

2

13
4 614

Q11

5

4

53

21

(-)N

3

2

22

Q11

22

I

1

Q12

14

314 5

Q11

W

1

22

A2

Q12
U

A2

DILM17-01
+ DILA-XHI20

DILM17-01
+ DILA-XHI20

21
A1

1

6

A1

Q12

22
21
A1
A2

14

14

13

Q11
Q12

22
21
A1
A2

22

21

21

14

1

13

313 5
14
4

Q11
W

Q11

13

W

DOLRS5.5/I(...V50HZ) 

14

14

21

21

22

Q12

13

V

DILM12-01
+ DILA-XHI20

13

22

II

+

4

DILM12-01
Reversing contactors
+ DILA-XHI20

21


0

2

DOLRS4/I(...V50HZ) 

M
3

21
M1

2

14

22

Q12

A2

53

DILM9-01
+ DILA-XHI20

Reversing contactors

Q11

	

+
Reversing
contactors

14
1 3

DILM9-01
+ DILA-XHI20

5/11

22

Q11

4 13 6

6

Q11

U

5
3 22

2

4

A1

Q11

21

14

Q12
Q12

21

A1

54

Q12

A2

53

Q12

22

5

DOLRS30/U(...V50HZ) 

Q11

13

Q11

–21

3

DOLRS22/U(...V50HZ) 

DILM65
+ DILM150-XHI11

13

+

Q11
1

21
A1

5/11

14

I

13
54

-

DILM65
+ DILM150-XHI11

M

13

22

64

64

DOLRS18.5/U(...V50HZ) 

DILM40M1 3
+ DILM150-XHI11

21

II

63

22

A2

21

64

13

DILM40
+ DILM150-XHI11

22

+

63

22

Q12

0

A2

–

22
21

Q11

22

Q11

53

Q12

53

Q11

21

13

63

14

14

64

Q11
Q11

22

14

64 Q12

A2

13

A2
+
0
Reversing contactors
	

II
21
+

13

63

DILM40
+Notes
DILM150-XHI11

DILM32-01
U V
+ DILA-XHI20

A1

21

13

64

13

Q12

21

3 5
22

Q11

21
64

22

Q11

22

14
4 6
13
14

(-)N

+

53

21

I2

M
3

M1

22
63

63

6A1

14

54

22

A2

64

3

Q12

A1

22

4

21
DILM65
II
22
+ DILM150-XHI11
22
14

+

21

63

64

DILM40
–
–
U V W
21
+ DILM150-XHI11
0 22
M
Reversing
contactors
M1

13

53

63
Q12

22
64
A2
21 Q11
A1

+

2

63

22

21
Spare
auxiliary contacts21 DILM12-01
Notes
+
DILM12-01 Notes
22
II
II
+ DILM65
–+ DILA-XHI20
– 21
+ + DILA-XHI20
Reversing
contactors 22
22
1 3 5
1 3 5
21
14
HI11
+ DILM150-XHI11
13
14
0 22
I
Q12
Q11
+
DILM17-01
DILM17-01
I
13
13
14
Q11
Q12
Mechanical
2 4 614
2 4 6
54
54 22
+
+
DILA-XHI20
+
DILA-XHI20
Q11
21
Q11
interlock
Q12 53
II
13
53
22
21
1 3 5 22
1 3 5
DILM25-01
DILM25-01
22
22 13
14
Q12
Q12
Q12
Q11
Q11
+
+
DILA-XHI20
+
DILA-XHI20
+
I
21
21 14
13 21

n

V

14

21

Q11

U

Q12

22

Q12

Q11

64

21
A1

A2

Contactors

64

A1

+

63

54

22
21

Q11

Contactor combinations
Reversing combinations

Q12

54
53

Q12

64

63
18.5

DOLRS15/U(...V50HZ) 

13

13

7

+

63

21

14

I

Q11

64

1563

DILM32-01
+ DILA-XHI20

6
5/11

63

22

22

64

63

1

22
21

II

64
64
DILM9-01
U V W
A1
21
+ DILA-XHI20 Q11 A1 DILM40
Q12
DILM40
–
–
0 22
64
64
A2
M
contacts
Notes A2 + DILM150-XHI11
Notes+
50
22
M1 DILM150-XHI11
+
3
63
63
DILM12-01
+
22
21
II
+ DILA-XHI20
65
30
22
21
64
64
+
DILM65
DILM65
–
–13
14
Mechanical
63
63
DILM17-01 0 21
+
I
+ DILM150-XHI11
+ DILM150-XHI11
13
14
interlock
+ DILA-XHI20 22
54
54
64
64
Q11
Q12 53
22
 
Specify21voltage & frequency
when ordering.
53
II
Standard
22
21 24 V, 110 V, 240 V, 415 V at 50 Hz.22
22 voltages: V AC:
+
Q12V DC: 12 –Q11
63
DILM25-01 Non-standard
14
13
voltages:
V63AC: 12+– 600 V at 50 or 60 Hz.
25021V.
21
+ DILA-XHI20
A1
A1
ForI DC13voltage 64add suffix14 64“-G” to Item No.
Q12
Q11
14
14
A2
A2
N.B. additional63charge
applies.
Please enquire for non-standard
configurations.
Q12
63
DILM32-01 Q11 13
+
13
22
22
+ DILA-XHI20
21

21

0

+
11
Contactor combinations
Reversing combinations

21

14

I

+

64

18
DILM12-01
DILM12-01
+ DILA-XHI20
+ DILA-XHI20
contactors
Q11
Q12 Reversing
Mechanical
interlock
DILM17-01
DILM17-01
25
+ DILA-XHI20
+ DILA-XHI20
22

63

Contactors

Contactor Q12

5.5

Contactors

1

12
DILM9-01
DILM9-01
Spare
auxiliary contacts+ DILA-XHI20Notes
+ DILA-XHI20

DILM32-01
+ DILA-XHI20

Contactor combinations
Reversing combinations

1-1158GB-AUS

mponents of the combination

DILM32-01
+ DILA-XHI20

-

Mechanical 12
interlock

DOLRS11/U(...V50HZ) 

Motor Control

6

DOLRS7.5/U(...V50HZ) 

5/11

Contactors

11

Contactors

25

+ DILA-XHI20
Contactor combinations
DILM25-01
DILM25-01
Reversing combinations
+ DILA-XHI20
+ DILA-XHI20

Q12

21
A1
A2

14

13

613
22

14

Q11
Q12

22
21
A1
A2

eaton corporation New Zealand Product Guide

225

Power Control
Motor Control
Contactor & Starter Assemblies
Star-delta Contactors & StartersE9

Rated
operational
current

Max. rating
for
three-phase
motors,
50 – 60 Hz

Max.
changeover
time

Individual components of the combination

AC-3,
380/415 V
Ie , A

AC-3,
380/415 V
P, kW

S

Mains contactor
Q11 Item No.

Delta contactor
Q15 Item No.

Star contactor
Q13 Item No.

12

5.5 

20

DILM7-10
+ DILA-XHI20

DILM7-01
+ DILA-XHI20

DILM7-01
+ DILA-XHI20

SDES5.5/U(...) 

16

7.5

20

DILM9-10
+ DILA-XHI20

DILM9-01
+ DILA-XHI20

DILM7-01
+ DILA-XHI20

SDES7.5/U(...) 

22

11

20

DILM12-10
+ DILA-XHI20

DILM12-01
+ DILA-XHI20

DILM7-01
+ DILA-XHI20

SDES11/U(...) 

30

15

20

DILM17-10
+ DILA-XHI20

DILM17-01
+ DILA-XHI20

DILM17-01
+ DILA-XHI20

SDES15/U(...) 

45

22

20

DILM25-10

DILM25-01

DILM17-01

SDES22/U(...) 

+ DILA-XHI20

+ DILA-XHI20

+ DILA-XHI20

Item No. 

Star-delta starter combinations

Motor Control

Open units
• Timing relay K1T: ETR4-51
• Complete with overload

55

30

20

DILM32-10
+ DILA-XHI20

DILM32-01
+ DILA-XHI20

DILM25-01
+ DILA-XHI20

SDES30/U(...) 

70

37

20

DILM40
+ DILM150-XHI11

DILM40
+ DILM150-XHI31

DILM40
+ DILM150-XHI11

SDES37/U(...) 

90

45

20

DILM50
+ DILM150-XHI11

DILM50
+ DILM150-XHI31

DILM40
+ DILM150-XHI11

SDES45/U(...) 

115

55

20

DILM65
+ DILM150-XHI11

DILM65
+ DILM150-XHI31

DILM40
+ DILM150-XHI11

SDES55/U(...) 

140

75

20

DILM80
+ DILM150-XHI11

DILM80
+ DILM150-XHI31

DILM50
+ DILM150-XHI11

SDES75/U(...) 

5.5

20

DILM7-10
+ DILA-XHI20

DILM7-01
+ DILA-XHI20

DILM9-10
+ DILA-XHI20

DILM9-01
+ DILA-XHI20

Enclosed units
• Complete with pushbutton & overload
• According to IEC 60947

7.5

Moeller SK0211-1158GB-AUS
22
Part no.
Max.
changeover
time

Price ($)
Product
group 0

30

Q13

15
Q15

45
s

22

55

30

20

SDES5.5/U(...)1)

723.50

63

64

64

20

SDES7.5/U(...)1)

723.50

63

63

63

64

64

64

63

63

64

64

64

1-1158GB-AUS
20

63
Moeller SK0211-1158GB-AUS
768.00
90

SDES11/U(...)1)

64

115
Q15

20

SDES15/U(...)1)

946.10
Mains contactor
Q11

SDES22/U(...)1)

968.40
Part no.

SDES30/U(...)1)

20
20

63

63

37
45

Individual components of the combination

auxiliary
cts
20
Q13

63

70

1,101.90

55

63
63
Delta
contactor
Q15
64
64
63

140

63
64

63

63

64

64

63

63

63

64

64

64

Part
no.
64

Moeller
20 SK0211-1158GB-AUS
DILM12-10

Star contactor
Q13

75

Part no.

20

DILA-XHI20Star contactor
Delta+ contactor
Q15
Q13

Part no.

Part+no.
DILA-XHI20Part no.

20

DILM17-01
+ DILA-XHI20

DILM17-01
+ DILA-XHI20

SDES15/I(...) 

DILM17-01
+ DILA-XHI20

SDES22/I(...) 

DILM9-10
+ DILA-XHI20

DILM9-01
DILM7-01
+ DILM150-XHI11
+ DILA-XHI20
+ DILA-XHI20

DILM40

13

K1
DILM32-01

17

64

2063

63
64
63

combination
64
64
20

20
contactor

o.

63

20

64

63

2064
63

2064
-01–
A-XHI20
20
-01–
A-XHI20
20
2-01
–
A-XHI20
20
–
20

7-01 63
A-XHI20
2064
63

22 34

SDES55/U(...)1)

1,669.50
DILM12-10

+ DILA-XHI20
	SDES5.5
– SDES30

SDES75/U(...)1)

21
22

13

I

14

Q11

17

K1 DILM25-01

21
22

22 34

DILM7-01
+ DILA-XHI20

N
DILM65

+ DILM150-XHI11
	SDES37
– SDES75
DILM80
+ 21DILM150-XHI11
0 22
S11DILM7-10
+ DILA-XHI20
Q11

Y
DILM65
+ DILM150-XHI31

DILM40
+ DILM150-XHI11

DILM80
+ DILM150-XHI31

DILM50
+ DILM150-XHI11

63
63
63
990.60
DILM7-01
DILM7-01
Q11
DILM17-10
DILM17-01
DILM17-01
+ DILA-XHI20
+ DILA-XHI20
64
64
13
DILA-XHI20
+ 64DILA-XHI20
+ DILA-XHI20
13
13
63
63
63
14
I
990.60
DILM9-10
DILM9-01
DILM7-01
14
14
63
DILM25-10
DILM25-01
DILM17-01
+ DILA-XHI20
+ DILA-XHI20
+ DILA-XHI20
Part no.
64
64
+ DILA-XHI20
+ 64DILA-XHI20
+ DILA-XHI20
14
44
14
17
17
14
44
14
17
17
64
63
K1 6318 K163 28
Q11 43 1,046.30
SDES11/I(...)1)
DILM12-10
DILM12-01
K1 18 K1 DILM7-01
Q11 43
13
13
13
13
63
DILM32-10
DILM32-01
DILM25-01
+ DILA-XHI20
+ DILA-XHI20
+ 28DILA-XHI20
Q13 Q15
64
64
Q13 Q15
+ DILA-XHI20
+ 64DILA-XHI20
+
22
22 DILA-XHI20
22
22
64
63
63
SDES15/I(...)1)
1,224.30
DILM17-10
DILM17-01
Q15 6321
Q13
21
Q15
Q13DILM17-01
DILM7-01
–
DILM40
DILM40
DILM40
+ DILA-XHI20
+ DILA-XHI2021
+ 21DILA-XHI20
64
64
64
+ DILA-XHI20
A1
A1
+ DILM150-XHI11
+ A1
DILM150-XHI31
+A1 DILM150-XHI11
A1
A1
A1
A1
63
63
SDES22/I(...)1)
1,335.60K1
DILM25-10
Q11
Q13 63
Q15
Q11
K1 DILM25-01
Q13
Q15 DILM17-01
DILM7-01
A2
A2
A2
A2
A2
A2
A2
+ DILA-XHI20
+ DILA-XHI20
+ A2
DILA-XHI20
–
DILM50
DILM50
DILM40
64
64
64
+ DILA-XHI20
(–)N + DILM150-XHI11
+ DILM150-XHI31
+ DILM150-XHI11
(–)NDILM32-10
63
63
N 1,613.90
Y63
SDES30/I(...)1)
DILM32-01
DILM25-01
N
Y
DILM7-01
+ DILA-XHI20
+ DILA-XHI20
+ DILA-XHI20
–
DILM65
DILM65
DILM40
64
64
64
+ DILA-XHI20
+ DILM150-XHI11
+21DILM150-XHI31
+ DILM150-XHI11
SDES37
– SDES75
33
SDES37/I(...)1)
1,881.00
–
–
DILM40
DILM40
L1 L2DILM40
L3
+ DILM150-XHI11
+ DILM150-XHI31
+ DILM150-XHI11
–
DILM80
DILM80
DILM50
21
22 34
F1
0 +
DILM150-XHI11
+21DILM150-XHI31
+ DILM150-XHI11
22
33
2,181.50
– New
–
DILM50
DILM50
DILM40
226SDES45/I(...)1)eaton
corporation
Zealand
Product
Guide
S11
+
DILM150-XHI11
+
DILM150-XHI31
+ DILM150-XHI11
63 DILM17-01
DILM7-10
DILM7-01
DILM7-01
22 34
Q11
B
1 x In
+ DILA-XHI20
+21DILA-XHI20
+ DILA-XHI20
+ SDES55/I(...)
DILA-XHI20 1)
13 2,292.80
13
33
–
–
DILM65
DILM65
DILM40
64
I 14 14
+
DILM150-XHI11
+
DILM150-XHI31
+ DILM150-XHI11
63
63

64

1)
SDES5.5/I(...)
Star
contactor
Q13

3,172.10

0
S11

21 33
–
–
DILM12-01
+22DILA-XHI20
34
21 33
–
–

SDES7.5/I(...)1)

I

13
+

21
A1

A2

N

0
S11

A2

K1
Q13
Q15

DILM25-01
+ DILA-XHI20

28
22
21

DILM40
+ DILM150-XHI11

A1
A2

Y

DILM65
+Q11
DILM150-XHI31
13

14
DILM80
+44 DILM150-XHI31
14
14
43

13

13

Q13

Q15

17

K1
Q15

Q11

21 33

(–)N

A1

K1

A2

A1
A2

Q13

N

18
22
21
A1
A2

K1
Q13
Q15

17

SDES45/I(...) 

DILM40
+ DILM150-XHI11

SDES55/I(...) 

DILM50
+ DILM150-XHI11

SDES75/I(...) 

28
22
21
A1
A2

L1 L2 L3
F1
B

A
0.58 x In

SDES37/I(...) 

Y



Q11

SDES30/I(...) 

DILM40
+ DILM150-XHI11

1 x In

14

Contactors

2063

64

22

A1

21 33

63

18

Q15

DILM50
+ DILM150-XHI31

22 34

64

K1

43
13
13
DILM32-01

17

SDES37 – SDES75

DILM25-01
DILM17-01
+ DILA-XHI20
+ DILA-XHI20
+ DILM150-XHI11

18
28
 S
pecify voltage & frequency when ordering.
+ DILA-XHI20
+ DILA-XHI20
+ DILA-XHI20
Q13 Q15
22
22
Contactor combinations
5/9
Standard voltages:
SDES37/U(...)1)
1,335.60 V AC: 24 –V, 110– V, 240 V, 415 V at 50 Hz DILM40
DILM40 Q15 21
Q13DILM40
21
DILM7-10
DILM7-01
DILM7-01
+ DILM150-XHI11
+ DILM150-XHI31
+ DILM150-XHI11
Non-standard
V AC: 12 – 600
V+ at
50 or 60combinations
Hz, V DC:
12 – 250 V
Star-delta
+ DILA-XHI20voltages:
+ DILA-XHI20
DILA-XHI20
A1
A1
A1
A1
For DC voltage
add suffix “-G”
SDES45/U(...)1)
1,558.20
– to part
– no.
DILM50
Q11
K1 DILM50Q13
Q15 DILM40
DILM9-10
DILM9-01
DILM7-01
A2
A2
A2
A2
+ DILM150-XHI11
N.B.+additional
Please enquire
for non-standard
configurations.+ DILM150-XHI31 + DILM150-XHI11
DILA-XHI20 charge+applies.
DILA-XHI20
+ DILA-XHI20
(–)N
13

17

+ DILM150-XHI31

(–)N

DILM80

14

14

A2

DILM65

13

44

Q13

+ DILM150-XHI11
DILM17-01
DILM17-01
+ DILA-XHI20
+ DILA-XHI20

20
I DILM25-10
14
14
+ DILA-XHI20
Q11 43
DILM32-10

DILM7-01
+ DILA-XHI20

+ DILM150-XHI11

21
20

14

Q11

13
DILM25-01
14
+ DILA-XHI20
14

A1

DILM12-01
DILM50
+ DILA-XHI20

0 22
S11DILM17-10
Q11
+ DILA-XHI20

Q11

+ DILA-XHI205/9 Q15
DILM7-01 combinations
+ DILA-XHI20
DILM40
Star-delta
combinations
Q11
K1
Q13

DILM7-01
+ DILA-XHI20

DILM12-10
20
+ DILA-XHI20
SDES5.5 – SDES30

22

14

DILM32-10
+ DILA-XHI20
Contactor

20

21

13

I

DILM7-10
+ DILA-XHI20

44

0
S11

DILM25-10

20

13

DILM7-01
+ DILA-XHI20

SDES11/I(...) 

DILA-XHI20
SDES5.5 –+SDES30

DILM17-10

Mains contactor
Q11

SDES7.5/I(...) 

+ DILA-XHI20

DILM12-01

+ DILA-XHI20
Individual components of the
combination

Spare auxiliary
contacts
Q11

11

20

SDES5.5/I(...) 

5/9

Contactors

16

DILM7-01
DILA-XHI20
Contactor+combinations
Star-delta
combinations
DILM7-01

Contactors

12

1 3

5

2 4 6

1 3

Q15

5

Q13

2 4 6

1 3

5

2 4 6

C
0.58 x In
U1
V1
W1

M1
M
3~

W2
U2
V2

Overload relay settings 	
Starting
A: IN x 0.58	
15 s
Protection of the motor in Y- and d configuration
15 – 40 s
B: IN x 1	
Only partial motor protection in star position
> 40 s
C: IN x 0.58	
Motor not protected in star position.
Timing relay set to approx. 10 s.
Main circuit:
Depending on the coordination type required (i.e. Type “1” or
Type “2”) it must be established whether the fuse protection
and the input wiring for the mains contactor and delta contactor
are to be common or separate.

Overload relay settings

Starting

A: IN x 0.58
Protection of the motor in Y- and d configuration

F 15 s

B: IN x 1
Only partial motor protection in star position

15 – 40 s

C: IN x 0.58
Motor not protected in star position

> 40 s

Power Control
Motor Control
1000V Mining Contactors
Eaton Westinghouse V201 Vacuum Contactor
Eaton’s Westinghouse V201 Vacuum Contactors are known for quality & proven
performance. They are ideally suited for heavy-duty applications in harsh environments.
These contactors are most commonly used for mining applications.
•	
•	
•	
•	
•	
•	
•	

Rated for up to 1500V
Small physical size
Long life
Reduced maintenance
No atmospheric contamination of the contacts
No noise, no arc flash
Derating is not required at higher voltages
Mounting in any position

Vacuum ContactorsNETT
Description

Item No.

160A

V201KRCJZ1

320A

V201KTCJZ1

540A

V201KVCJZ1

Motor Control

•	

110V AC Coil as standard. Vacuum Contactor Amp Ratings are AC3. Vacuum switch tubes cannot be replaced.

Auxiliary Contacts for V201 Vacuum Contactors & DPCK Air Break ContactorsC4
Description

Item No.

1NO/1NC

J-11

2NO

J-20

2NC

J-02

AccessoriesC4
Description

Item No.

For mechanically interlocking two 160A Vacuum Contactors

180C113G04

For mechanically interlocking two 320A Vacuum Contactors

180C113G16

For mechanically interlocking two 540A Vacuum Contactors

180C113G17

Interphase barriers for 160A Vacuum contactor. Contains a set of two interphase barriers.

IPB1 




A set is suitable for line OR load side of the contactor. For line AND load side interphase barriers, order two sets.
Discount code is C5.

Air Break 1000V Mining Contactors, Air Break 1000V Contactors

DPCK ContactorsC4
Description

Poles

Coil Voltage

Item No.

35A

3

110V

DPCK3035AW

35A

3

240V

DPCK3035WW

35A

5

110V

DPCK5035AW

100A

3

110V

DPCK3100AW

250A

3

110V

DPCK3250V

250A

3

240V

DPCK3250W

AccessoriesC4
Description

Item No.

Auxiliary contact 1NC/1NO

J-11

Auxiliary contact 2NO

J-20

Auxiliary contact 2NC

J-02

Mechanical interlock for 35A contactor

180C113G09

Replacement contacts for 35A contactor (Kit of 3)*

180C180G02

Replacement contacts for 100A contactor (Kit of 3)

180C180G06

*For 5 pole 35A contactor, use 2 kits.

eaton corporation New Zealand Product Guide

227

Power Control
Motor Control
IT, IEC Contactors & Starters

Full Voltage Non-reversing DC-Operated, Open Type
Starters (A – F Frames), with 3-Pole Solid-State
Overload Protection

DC-Operated Full Voltage Non-Reversing 3-Pole
Open Type Contactors (A-F Frames)
•	
•	

•	

•	

Motor Control

•	
•	
•	
•	
•	
•	
•	
•	

•	

24V DC Coil Control — safe, reliable
global standard
No seal in auxiliary contacts required
— control wiring is not needed between
the contactor & overload relay
Unique Pulse Width Modulated (PWM) coil
controller minimizes energy & coil
power consumption
Microprocessor-based control
High immunity to ESD, harmonics — minimal Total Harmonic
Distortion
Built-in logic to provide either 2- or 3-wire control
Easy field assembly of control wiring — plug & unplug lockable control
connector
DIN rail mounting, 6 – 100A (A – D Frames)
Common accessories
IP20 Finger Protection
Low wattage coils & minimal heat dissipation
24V DC power supply required with contactors, see page 271

•	
•	
•	
•	
•	
•	
•	
•	
•	
•	
•	
•	
•	
•	
•	

DC-Operated Full Voltage Non-Reversing 3-Pole
Open Type Contactors (A-F Frames)C13
Max Amp. AC-3

Max Amp. AC-1

400/415V, Rating kW

Item No.

115V AC – 600V AC, 1/4 – 350 hp/3/4 – 250 kW,
50/60 Hz
24V DC Coil Control — safe, reliable
global standard
Phase loss & current unbalance protection,
user selectable
Unique Pulse Width Modulated (PWM) coil
controller minimizes energy & coil power consumption
Microprocessor-based control
Motor temperature & power-up protection with thermal memory
LED status indication — trip, trip class, motor thermal state, reset,
overload state
Lockable overload cover protects against unauthorised adjustment &
reset functions
No control wiring needed between contactor & overload relay —
eliminates seal in auxiliary contacts
Minimal heat — no full voltage coils
Wide 3.2:1 current adjustment range
High immunity to ESD, harmonics — minimal Total Harmonic
Distortion
DIN rail mounting, 6A – 100A (A – D Frames)
Communication Interface with Starter Network Adapter Product
(SNAP)
2- or 3-wire control
24V DC power supply required with contactors, see page 271

Full Voltage Non-reversing DC-Operated, Open Type
Starters (A – F Frames), with 3-Pole Solid-State
Overload ProtectionC13
Max Amp. AC-3

6

12

2.2

E111A06X3N

9

16

4

E111A09X3N

12

20

5.5

E111A12X3N

6

400/415V, Rating kW

Item No.

.25 – .8

2.2

E101A06A3A

.59 – 1.9

E101A06B3A

1.4 – 4.4

E101A06C3A

2.8 – 9.0

E101A06D3A

3.8 – 12

Frame B (45 mm)
18

FLC

Frame A (27 mm)

Frame A (27 mm) - smallest contactor in the market

25

9

E111B18X3N

25

40

12.5

E111B25X3N

32

50

15

E111B32X3N

9

Frame C (54 mm)

.25 – .8

E101A06E3A
4

E101A09B3A

1.4 – 4.4

E101A09C3A

2.8 – 9.0

E101A09D3A

3.8 – 12

40

63

18.5

E111C40X3N

50

85

22

E111C50X3N

12

Frame D (76 mm)
65

100

33

E111D65X3N

85

115

45

E111D85X3N

Frame B (45 mm)

100

130

55

E111D10X3N

18

.25 – .8

E101A09E3A
5.5

E101A12B3A

1.4 – 4.4

E101A12C3A

2.8 – 9.0

E101A12D3A

3.8 – 12

E101A12E3A

.25 – .8

9

E101B18A3A
E101B18B3A

1.4 – 4.4

E101B18C3A

125

200

63

E111E12X3N

160

225

80

E111E16X3N

.59 – 1.9

E101B25B3A

200

250

110

E111E20X3N

1.4 – 4.4

E101B25C3A

2.8 – 9.0

E101B25D3A

6.3 – 20

E101B25G3A

25

Frame F (140 mm)
250

300

140

E111F25X3N

315

375

160

E111F31X3N

420

450

220

E111F42X3N

All contactors must use a power supply page 271. 24V DC coil voltage. Accessories available page 267.
Integral solid-state auxiliary hold-in circuit.
Control inputs (P, F) are rated 24V DC (3 – 5 mA). For reversing contactors, contact Eaton.

.25 – .8

12.5

10 – 32
32

.25 – .8

eaton corporation New Zealand Product Guide

E101B25A3A

E101B25J3A
15

E101B32A3A

.59 – 1.9

E101B32B3A

1.4 – 4.4

E101B32C3A

2.8 – 9.0

E101B32D3A

6.3 – 20

E101B32G3A

10 – 32

E101B32J3A

Accessories available page 267. For reversing contactors, contact Eaton.

228

E101A12A3A

.59 – 1.9

.59 – 1.9

Frame E (105 mm)

E101A09A3A

.59 – 1.9

Power Control
Motor Control
IT, IEC Contactors & Starters

Accessories for IT Motor Control

IT. IEC StartersC13

IT IEC Contactors & Starters Accessories

Max Amp. AC-3

400/415V, FLC

400/415V, Rating kW

Item No.

.25 – .8

22

E101C40A3A

Frame C (54 mm)

50

.59 – 1.9

E101C40B3A

1.4 – 4.4

E101C40C3A

2.8 – 9.0

E101C40D3A

5.0 – 16

E101C40F3A

8.4 – 27

E101C40H3A

16 – 50

E101C40L3A

.25 – .8

25

E101C50A3A

.59 – 1.9

E101C50B3A

1.4 – 4.4

E101C50C3A

2.8 – 9.0

E101C50D3A

5.0 – 16

E101C50F3A

8.4 – 27

E101C50H3A

16 – 50

E101C50L3A

Frame D (76 mm)
65

85

5.0 – 16

33

8.4 – 27

E101D65H3A

14 – 45

E101D65K3A

31 – 100

E101D65N3A

5.0 – 16

45

E101D85F3A

8.4 – 27

E101D85H3A

14 – 45

E101D85K3A

31 – 100
100

E101D65F3A

5.0 – 16

IT ConnectC13
Description

Item No.

DeviceNet Starter Network Adapter Product
For IT Starters & S752 Soft Starters

D77B-DSNAP-X1

QCPort Starter Network Adapter Product For IT
Starters & S752 Soft Starters

D77B-QSNAP-X1

DeviceNet Adaptor - Concentrates all
data from IT devices into a single DeviceNet
node

D77D-DNA

Modbus Adaptor - Concentrates all data from
IT devices into a single Modbus node

D77D-EMA

EtherNet/IP Adaptor - Concentrates all date
from IT devices & I/O modules into a single
EtherNet/IP node

D77D-EIP

PROFIBUS Adaptor - Concentrates all IT
devices & I/O modules into a single node.
Supports Modbus as a slave device.

D77D-PNA

Motor Control

40

E101D85N3A
55

E101D10F3A

8.4 – 27

E101D10H3A

14 – 45

E101D10K3A

31 – 100

E101D10N3A

Frame E (105 mm)
125

14 – 45

63

E101E12M3A

42 – 135

E101E12P3A

63 – 200
160

200

E101E12K3A

28 – 90

14 – 45

E101E12R3A
80

E101E16K3A

28 – 90

E101E16M3A

42 – 135

E101E16P3A

63 – 200

E101E16R3A

14 – 45

110

E101E20K3A

28 – 90

E101E20M3A

42 – 135

E101E20P3A

63 – 200

E101E20R3A

Frame F (140 mm)
250

42 – 135

140

84 – 270

E101F25S3A

131 – 420
315

42 – 135

E101F25T3A
160

84 – 270

42 – 135

E101F31P3A
E101F31S3A

131 – 420
420

E101F25P3A

E101F31T3A
220

E101F42P3A

84 – 270

E101F42S3A

131 – 420

E101F42T3A

For Reversing Contactors contact Eaton.

eaton corporation New Zealand Product Guide

229

Power Control

Drives & Soft Starters

Drives & Soft Starters

Total motor control
solutions for every
industry & application

•	

230

eaton corporation New Zealand Product Guide

Eaton’s variable speed drives are
software driven solid-state devices
that enable the OEM, contractor or
end user to control the speed of
motors used in industrial, mining
& HVAC applications. Drives are
an alternative to direct-on-line or
star-delta starters as a method to
control the motor & offer greatly
enhanced control capability along
with energy savings.

•	

From advanced starting & stopping
control to integrated motor protection
& communications capabilities, Eaton’s
line of soft starters provide a unique
combination of soft starting & flexible
protective features. Communications
capabilities enable integration into
building management systems for
easy monitoring & troubleshooting
& the small size permits the use
of smaller panels & enclosures,
for significant cost savings.

Power Control
Drives & Soft Starters

Soft starters
DS4 soft starters

M03

For use with

Rated operational voltage
at 50/60 Hz

Rated operational current

Ue ` 10 %, V AC

AC–-51, Ie, A

Rated power for threephase motors at AC-3
400 V
AC–-53, Ie, A

Item No.

P, kW

Soft starters for threephase motors

110 – 500

for three-phase motors,
fast control inputs, DC
actuation only
Soft starter with reversing
function for three-phase
motors

11

6

2.2

DS4-340-2K2-M

17

9

4

DS4-340-4K0-M

22

12

5.5

DS4-340-5K5-M

29

16

7.5

DS4-340-7K5-M

41

23

11

DS4-340-11K-M

11

6

2.2

DS4-340-2K2-M-DC

–

6

2.2

DS4-340-2K2-MR

–

9

4

DS4-340-4K0-MR

–

12

5.5

DS4-340-5K5-MR

–

16

7.5

DS4-340-7K5-MR

–

23

11

DS4-340-11K-MR

Drives & Soft Starters

DS4 soft starters
600 switching operations/h at 6 x In for 0.5 s, 300 switching operations/h at 6 x In for 0.1 s, 20 starts/h at 6 x In for 5 s

DS4 soft starters
10 starts/h at 3 x In for 5 s
Soft starters with built-in
bypass for three-phase
motors

110 – 500

Soft starter with builtin bypass & reversing
function for three-phase
motors

–

16

7.5

DS4-340-7K5-MX

–

23

11

DS4-340-11K-MX

–

31

15

DS4-340-15K-MX

–

16

7.5

DS4-340-7K5-MXR

–

23

11

DS4-340-11K-MXR

–

31

15

DS4-340-15K-MXR

DS6 soft starters

M03
Mains voltage at 50/60 Hz

Rated operational current

Rated power for three-phase motors
at 3 AC 400 V

UL ` 10 %, V AC

I e, A

P, kW

41

22

DS6-340-22K-MX

55

30

DS6-340-30K-MX

68

37

DS6-340-37K-MX

81

45

DS6-340-45K-MX

99

55

DS6-340-55K-MX

134

75

DS6-340-75K-MX

161

90

DS6-340-90K-MX

196

110

DS6-340-110K-MX

Item No.

Soft starters for three-phase motors
with built-in bypass, 10 starts/h at 3 x In for 5 s
230 – 480

230 – 480

eaton corporation New Zealand Product Guide

231

Power Control
Drives & Soft Starters
Soft starters
DS7 Soft Starters
•	
•	
•	
•	

Tool-less plug connection, ensuring easy connection & wiring with
other switching devices such as motor-protective circuit breakers
Connection design, handling & the 45 mm device width match our
motor-protective circuit-breakers & contactors of the device series exactly
The DS7 ensures a jerk-free increase in torque and effective current
reduction in the three-phase motor startup phase
Nine device versions for motor ratings from 1.1kW to 15kW/ 400V or

•	

•	

3A to 32A/ 480V are available
Furthermore, the DS7 is also
available with a 24 V AC/DC
or 110/230 V control voltage input
Settings & status values can be remotely transferred via
SmartWire-Darwin gateway regardless of whether Profibus
DP or CANopen control commands are used

Drives & Soft Starters

M03
Rated operational current

Rated power for three-phase motors at 3 AC
400 V

Ie, A

P, kW

3
4

Control supply

Item No.

1.1

110/230V AC

DS7-342SX003N0-N

1.5

110/230V AC

DS7-342SX004N0-N

5

2.2

110/230V AC

DS7-342SX005N0-N

7

3

110/230V AC

DS7-342SX007N0-N

9

4

110/230V AC

DS7-342SX009N0-N

12

5.5

110/230V AC

DS7-342SX012N0-N

16

7.5

110/230V AC

DS7-342SX016N0-N

24

11

110/230V AC

DS7-342SX024N0-N

32

15

110/230V AC

DS7-342SX032N0-N

36

18.5

110/230V AC

DS7-342SX036N0-N

41

22

110/230V AC

DS7-342SX041N0-N

55

30

110/230V AC

DS7-342SX055N0-N

70

37

110/230V AC

DS7-342SX070N0-N

81

45

110/230V AC

DS7-342SX081N0-N

100

55

110/230V AC

DS7-342SX100N0-N

135

75

110/230V AC

DS7-342SX135N0-N

160

90

110/230V AC

DS7-342SX160N0-N

200

110

110/230V AC

DS7-342SX200N0-N

S811 Intelligent Technologies (IT) Soft Starters
•	
•	
•	
•	
•	
•	
•	

Built-in overload protection
Built-in run bypass contactor
Adjustable ramp times
Adjustable torque control
Adjustable kick start control
Programmable overload settings, 31-100% of rated current
Digital Interface Module (DIM) to safely configure, commission,
monitor and troubleshoot

•	
•	
•	

•	
•	
•	

Soft start and Soft stop control
Multiple trip class settings (5, 10, 20 and 30)
Built-in comms. capability for
DeviceNet/Modbus/Ethernet/Profibus
(through the DIM or using CH Studio software)
Six SCR control
Ideal for pump protection and control
24V DC 55W power supply required
with soft starter see below

B57
Max current (amps)
Normal Duty

kW rating at 415V AC
Severe Duty

Normal Duty*

Item No.
Severe Duty**

37

22

18.5

11

S811N37P3S

66

42

37

22

S811N66P3S

105

65

60

37

S811R10P3S

135

80

75

45

S811R13P3S

180

115

100

63

S811T18P3S

240

150

132

90

S811T24P3S

304

192

185

110

S811T30P3S

360

240

200

132

S811U36P3S

420

305

220

160

S811U42P3S

500

365

295

200

S811U50P3S

650

420

400

220

S811V65P3S

720

480

425

280

S811V72P3S

850

525

500

300

S811V85P3S

1000

600

600

375

S811V10P3S

Normal duty is 4 starts per hour at ramp current 300% of full load amps. Severe duty is 4 starts per hour at ramp current 450% of full load amps. For 6-wire inside-the-delta soft starters, please contact our sales office.

Accessories for S811 Soft Starters

B57

Description

232

Item No.

Lug Kits, 3-phase

2 cable connection, up to 2 x 240mm dia(S8X1TXXX)

EML24

-

2 cable connection, up to 2 x 240mm dia(S8X1VXXX)

EML28

Control Interface Module Panel Mounting Kits

Kit with 2m Cable

EMA69C

Control Wire Connectors

12-Pin Connector for Control Wiring

EMA75L

eaton corporation New Zealand Product Guide

Power Control
Drives & Soft Starters
Soft Starters
Power Supplies

B57
(Sealed) Amperes

Inrush (Peak) Wattage

Input Voltage Amperes

VAC

Item No.

10

0.4

20

0.8

240

PSS10E

10

0.4

20

0.8

415

PSS10F

25

1

165

6.5

240

PSS25E

25

1

165

6.5

415

PSS25F

55

2.3

250

10.4

240

PSS55B

55

2.3

250

10.4

415

PSS55C

DIN Rail power supply mounting kit

PSSDIN

IT Connect

B57

Description

Item No.

DeviceNet Adaptor - Concentrates all data from IT devices into a single DeviceNet node

D77D-DNA

Modbus Adaptor - Concentrates all data from IT devices into a single Modbus node

D77D-EMA

EtherNet/IP Adaptor - Concentrates all date from IT devices & I/O modules into a single EtherNet/IP node

D77D-EIP

Profibus Adaptor - Concentrates all IT devices & I/O modules into a single Profibus node. Supports Modbus
as a slave device.

D77D-PNA

Drives & Soft Starters

Continuous Wattage

Variable Speed Drives
NFX9000 1-ph OEM drives
•	
•	
•	
•	
•	
•	
•	
•	

Out-of-the-box: factory settings loaded for quick startup
Serial communication port RS485
Constant torque, 150% overload for 1 min. rated
2 preset speeds, 2 adjustable linear or S-curves
3 jump frequencies, with adjustable width
Stop modes: decel, coast or DC injection
DIN rail mountable or panel-mount
4 programmable digital inputs, 1 programmable relay output,
1 analogue input

•	
•	
•	
•	

Earth fault, over & undervoltage
& current, over temperature protection
Diagnostics: last 3 trips with cause
Status LEDs & alphanumeric display,
plus rotary potentiometer
Inbuilt RFI filter supplied as standard

1-ph in, 3-ph out, 240V AC
Description

B57
H x W x D (mm)

High overload

Low overload

P(kW)

I(H)

P(kW)

Item No.
I(L)

NFX9000 Drive 240V 0.185kW CT IP20

132 x 68 x 128

0.185

1.6

0.185

1.6

NFXF25A0-2

NFX9000 Drive 240V 0.37kW CT IP20

132 x 68 x 128

0.37

2.5

0.37

2.5

NFXF50A0-2

NFX9000 Drive 240V 0.75kW CT IP20

132 x 68 x 128

0.75

4.2

0.75

4.2

NFX001A0-2

MVX9000 1ph/3-ph OEM drives
•	
•	
•	
•	
•	
•	
•	

Sensorless vector drive with auto-tuning, built-in PID	
Serial communication port RS485	
Constant torque, 150% overload for 1 min rated	
7 preset speeds, 2 adjustable linear or S-curves	
3 jump frequencies, with adjustable width	
Stop modes: decel, coast or DC injection	
Auto Restart: 4 selectable retry restart modes	

•	
•	
•	
•	

6 programmable digital inputs, 1 digital
and 1 relay output, 2 analogue inputs	
Earth fault, over and undervoltage and
current, overtemperature protection	
Diagnostics: last 3 trips with cause	
Status LEDs and alphanumeric display,
plus rotary potentiometer	

1-ph in, 3-ph out, 240V AC

B57

Description

H x W x D (mm)

High overload

Low overload

Item No.

P(kW)

I(H)

P(kW)

I(L)

MVX9000 Drive 240V 0.37kW CT IP20

161 x 100 x 143

0.37

2.5

0.37

2.5

MVXF50A0-2

MVX9000 Drive 240V 0.75kW CT IP20

161 x 100 x 143

0.75

5

0.75

5

MVX001A0-2

MVX9000 Drive 240V 1.5kW CT IP20

161 x 100 x 143

1.5

7

1.5

7

MVX002A0-2

MVX9000 Drive 240V 2.2kW CT IP20

235 x 125 x 192

2.2

10

2.2

10

MVX003A0-2

eaton corporation New Zealand Product Guide

233

Power Control
Drives & Soft Starters
Variable Speed Drives

Drives & Soft Starters

3-ph in, 3-ph out, 415V AC

B57

Description

H x W x D (mm)

High overload

Low overload

Item No.

P(kW)

I(H)

P(kW)

I(L)

MVX9000 Drive 415V 0.75kW CT IP20

161 x 100 x 143

0.75

3

0.75

3

MVX001A0-4

MVX9000 Drive 415V 1.5kW CT IP20

161 x 100 x 143

1.5

4

1.5

4

MVX002A0-4

MVX9000 Drive 415V 2.2kW CT IP20

161 x 100 x 143

2.2

5

2.2

5

MVX003A0-4

MVX9000 Drive 415V 3.7kW CT IP20

235 x 125 x 192

3.7

8.2

3.7

8.2

MVX005A0-4

MVX9000 Drive 415V 5.5kW CT IP20

235 x 125 x 192

5.5

13

5.5

13

MVX007A0-4

MVX9000 Drive 415V 7.5kW CT IP20

235 x 125 x 192

7.5

18

7.5

18

MVX010A0-4

Options & accessories

B57

Description

Item No.

MVX9000 Copy/Paste Keypad

MVXCOPY

MVX9000 Standard Keypad

MVXKPD

MVX9000 Keypad Remote Mount Kit

MVXRM

MVX9000 Extension I/O

MVXEIO

MVX9000 Devicenet Comms. Module

MVXDN

MVX9000 IP21 Enclosure FR1

MVXENCS

MVX9000 IP21 Enclosure FR2

MVXENCL

Braking Resistors & Braking Units - 240V Series
App. Motor kW

Resistor Qty.

Resistance & Wattage

B57
Braking Torque

Full Load

Item No.

0.37

1

80W 200 ohm

220%

.216

K13-000034-0821

0.75

1

80W 200 ohm

125%

.427

K13-000034-0821

1.5

1

300W 20 ohm

125%

.849

K13-000034-0824

2.2

1

300W 70 ohm

125%

1.262

K13-000034-0824

Braking Torque

Full Load

Item No.

Braking Resistors & Braking Units - 415V Series
App. Motor kW

Resistor Qty.

Resistance & Wattage

B57

0.75

1

80W 750 ohm

125%

.427

K13-000034-0841

1.5

1

300W 250 ohm

125%

.849

K13-000034-0843

2.2

1

300W 250 ohm

125%

1.262

K13-000034-0843

3.7

1

400W 150 ohm

125%

2.080

K13-000034-0844

5.5

2 in parallel

500W 100 ohm

125%

3.111

K13-000034-0845

7.5

3 in parallel

1000W 75 ohm

125%

4.148

K13-000034-0846

EMI Filters

234

B57

Description

Item No.

MVX9000 EMI Filter 1PH 240V 0.37KW

20DRT1W3S

MVX9000 EMI Filter 1PH 240V 0.75KW

20DRT1W3S

MVX9000 EMI Filter 1PH 240V 1.5KW

20DRT1W3S

MVX9000 EMI Filter 1PH 240V 2.2KW

32DRT1W3C

MVX9000 EMI Filter 3PH 415V 0.75KW

11TDT1W4S

MVX9000 EMI Filter 3PH 415V 1.5KW

11TDT1W4S

MVX9000 EMI Filter 3PH 415V 2.2KW

11TDT1W4S

MVX9000 EMI Filter 3PH 415V 3.7KW

17TDT1W44

MVX9000 EMI Filter 3PH 415V 5.5KW

17TDT1W44

MVX9000 EMI Filter 3PH 415V 7.5KW

26TDT1W4B4

eaton corporation New Zealand Product Guide

Power Control
Drives & Soft Starters

GVX9000 3-ph industrial drives
•	 Sensorless vector drive with auto-tuning, built-in PID
•	 Serial communication port RS485
•	 High overload Constant torque & Low overload Variable torque ratings
•	 7 preset speeds, 2 adjustable linear or S-curves
•	 3 jump frequencies, with adjustable width
•	 Stop modes: decel, coast or DC injection
•	 Auto Restart: 4 selectable retry restart modes
•	 10 digital inputs, 2 digital & 2 relay outputs, 3 analogue inputs & 1 analogue output
•	 Earth fault, over & undervoltage & current, over temperature protection
•	 Diagnostics: last 3 trips with cause
•	 Status LEDs & Plain English text display, copy/paste keypad

3-ph in, 3-ph out, 415V AC

B57

Description

H x W x D (mm)

High overload

Low overload

P(kW)

I(H)

P(kW)

I(L)

GVX9000 Drive 415V 0.75kW VT IP20

260 x 150 x 174

0.75

2.7

0.75

2.2

GVX001A1-4

GVX9000 Drive 415V 1.5kW VT IP20

260 x 150 x 174

1.5

4.2

1.5

4.2

GVX002A1-4

GVX9000 Drive 415V 2.2kW VT IP20

260 x 150 x 174

2.2

5.5

2.2

5.5

GVX003A1-4

GVX9000 Drive 415V 3.7kW VT IP20

260 x 150 x 174

3.7

8.5

3.7

8.5

GVX005A1-4

GVX9000 Drive 415V 7.5kW VT IP20

323 x 200 x 197

5.5

13

7.5

18

GVX007A1-4

GVX9000 Drive 415V 11kW VT IP20

323 x 200 x 197

7.5

18

11

24

GVX010A1-4

GVX9000 Drive 415V 15kW VT IP20

323 x 200 x 197

11

24

15

32

GVX015A1-4

GVX9000 Drive 415V 18.5kW VT IP20

404 x 250 x 220

15

32

18.5

38

GVX020A1-4

GVX9000 Drive 415V 22kW VT IP20

404 x 250 x 220

18.5

38

22

45

GVX025A1-4

GVX9000 Drive 415V 30kW VT IP20

404 x 250 x 220

22

45

30

60

GVX030A1-4

GVX9000 Drive 415V 37kW VT IP20

589 x 370 x 260

30

60

37

73

GVX040A1-4

GVX9000 Drive 415V 45kW VT IP20

589 x 370 x 260

37

73

45

91

GVX050A1-4

GVX9000 Drive 415V 55kW VT IP20

589 x 370 x 260

45

91

55

110

GVX060A1-4

GVX9000 Drive 415V 75kW VT IP20

589 x 370 x 260

55

110

75

150

GVX075A1-4

GVX9000 Drive 415V 90kW VT IP20

589 x 370 x 260

75

150

90

180

GVX100A1-4

Options & accessories

Item No.

Drives & Soft Starters

Variable Speed Drives

B57

Description

Item No.

GVX9000 Copy/Paste Keypad

GVXKPD

GVX9000 Keypad Remote Mount Kit

GVXRM

GVX9000 Encoder Feedback Card

GVXPG

GVX9000 Devicenet Comms. Card

GVXDN

GVX9000 Profibus Comms. Card

GVXPB

GVX9000 Lonworks Comms. Card

GVXLON

GVX9000 240V Braking Unit

GBM2022

GVX9000 415V Braking Unit

GBM4045

GVX EMI Filter 415V 9A 0.75-3.7KW

GVXEMI-4A

GVX EMI Filter 415V 16A 5.5-7.5KW

GVXEMI-4B

GVX EMI Filter 415V 32A 11-15KW

GVXEMI-4C

GVX EMI Filter 415V 50A 18.5-22KW

GVXEMI-4D

GVX EMI Filter 415V 60A 30KW

GVXEMI-4E

GVX EMI Filter 415V 80A 37-45KW

GVXEMI-4F

GVX EMI Filter 415V 112A 55KW

GVXEMI-4G

GVX EMI Filter 415V 136A 75KW

GVXEMI-4H

GVX EMI Filter 415V 160A 90KW

GVXEMI-4I

eaton corporation New Zealand Product Guide

235

Power Control
Drives & Soft Starters
Variable Speed Drives
M-Max Machinery Drives
•	 Ease of use — plug & play, start-up wizard, advanced diagnostic capability,
copy/paste parameters without powering drive
•	 Compact, space-saving design
•	 Rugged & reliable — 50°C rating, 150% overload for 1 min., 200% starting current
for 2 secs. in every 20 sec. period, conformal coated boards, 2 year warranty
•	 RS485/Modbus & PI-controller inbuilt as standard
•	 Internal EMC filter complying with IEC61800-3
•	 RoHS compliance

Drives & Soft Starters

1-ph in, 3-ph out, 240V AC

B57

Description

H x W x D (mm)

High overload

Low overload

Item No.

P(kW)

I(H)

P(kW)

I(L)

M-Max Drive 240V 0.25 kW CT IP20

157 x 66 x 102

0.25

1.7

0.25

1.7

MMX12AA1D7F0-0

M-Max Drive 240V 0.37 kW CT IP20

157 x 66 x 102

0.37

2.4

0.37

2.4

MMX12AA2D4F0-0

M-Max Drive 240V 0.55 kW CT IP20

157 x 66 x 102

0.55

2.8

0.55

2.8

MMX12AA2D8F0-0

M-Max Drive 240V 0.75 kW CT IP20

157 x 66 x 102

0.75

3.7

0.75

3.7

MMX12AA3D7F0-0

M-Max Drive 240V 1.1 kW CT IP20

195 x 90 x 105

1.1

4.8

1.1

4.8

MMX12AA4D8F0-0

M-Max Drive 240V 1.5 kW CT IP20

195 x 90 x 105

1.5

7

1.5

7

MMX12AA7D0F0-0

M-Max Drive 240V 2.2 kW CT IP20

263 x 100 x 112

2.2

9.6

2.2

9.6

MMX12AA9D6F0-0

Description

H x W x D (mm)

High overload
P(kW)

I(H)

P(kW)

I(L)

M-Max Drive 415V 0.37 kW CT IP20

157 x 66 x 102

0.37

1.3

0.37

1.3

MMX34AA1D3F0-0

M-Max Drive 415V 0.55 kW CT IP20

157 x 66 x 102

0.55

1.9

0.55

1.9

MMX34AA1D9F0-0

3-ph in, 3-ph out, 415V AC

B57
Low overload

Item No.

M-Max Drive 415V 0.75 kW CT IP20

157 x 66 x 102

0.75

2.4

0.75

2.4

MMX34AA2D4F0-0

M-Max Drive 415V 1.1 kW CT IP20

157 x 66 x 102

1.1

3.3

1.1

3.3

MMX34AA3D3F0-0

M-Max Drive 415V 1.5 kW CT IP20

195 x 90 x 105

1.5

4.3

1.5

4.3

MMX34AA4D3F0-0

M-Max Drive 415V 2.2 kW CT IP20

195 x 90 x 105

2.2

5.6

2.2

5.6

MMX34AA5D6F0-0

M-Max Drive 415V 3.0 kW CT IP20

263 x 100 x 112

3

7.6

3

7.6

MMX34AA7D6F0-0

M-Max Drive 415V 4.0 kW CT IP20

263 x 100 x 112

4

9

4

9

MMX34AA9D0F0-0

M-Max Drive 415V 5.5 kW CT IP20

263 x 100 x 112

5.5

12

5.5

12

MMX34AA012F0-0

M-Max Drive 415V 7.5 kW CT IP20

263 x 100 x 112

7.5

14

7.5

14

MMX34AA014F0-0

M-Max PC Comms. & Copy/Paste Adaptor

-

-

-

-

-

MMX-COM-PC

Total drive solutions for every
industry & application.
The 9000X Family of Drives includes
SVX9000, SLX9000, SPX9000 &
LCX9000 drives. With the 9000X series
sensor-less vector control, Eaton’s expanded
drive offering now covers a complete line of
PWM adjustable frequency (speed) drives in
ratings from 0.75 to 1400 kW constant torque;
1.1 to 1600 kW variable torque at 415V AC.

The liquid-cooled LCX9000 drive is our
most space-saving AC drive, well suited for
locations where air-cooling would be difficult
or expensive, or where the installation space is
at a premium.
As no air channels are required, the
LCX9000drives are extremely compact &
suitable for ships & in the offshore industry,
in mines or in heavy industry.

For further Information:

0508 328 6669
www.eaton.co.nz

236

eaton corporation New Zealand Product Guide

Equipped with high processing power, the
SPX9000 can use information from an encoder
or a resolver in order to provide very precise
motor control. Typical applications requiring
high performance are: master-slave drives,
positioning applications, winder tension control
& synchronization. The SPX9000 supports fast
drive-to-drive communication.

Power Control

Control
& Indication

•	
•	
•	
•	
•	

Control & Indication

Control & Indication

Control at your fingertips
Rugged, durable, reliable
A wide range of operators to suit your application
IP65 to IP67 rated pushbutton operators
Cam switches can be custom made to suit your unique applications

eaton corporation New Zealand Product Guide

237

Power Control

SK1158GB-INT.book Seite 2 Donnerstag, 2. Oktober 2008 2:27 14

Control & Indication

1/2

System overview
22.5mm Pushbuttons
RMQ-Titan
RMQ - Titan, system overview

Moeller SK0211-1158GB-AUS

Control circuit devices

Control & Indication

Contact blocks
Fixing adaptor

4-way
selector switch

Contact blocks

4-way pushbutton

Fixing adaptor

Enclosure

4-way joystick

Emergency-Stop
actuator

Contact blocks

Complete
legend plate

Pushbutton
actuator

Button plate/
button lens
Selector switch
actuator

Telescopic clip

Key-operated
actuator

Centring
adaptor

Contact block

Contact blocks

Indicator
light
Fixing adaptor
Buzzer

Acoustic
indicator

Acoustic indicator cap

Top-hat rail
adaptor

Potentiometer

Front rings

(Titanium appearance standard, black and gold options)

238

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan, system overview
Competitively priced, Moeller’s RMQ-Titan range comprises pushbuttons, selector switches, joysticks, Emergency-Stop &
key-operated actuators. The system includes a variety of indicator lights & illuminated pushbuttons in white, red, yellow,
blue & green. They are available in two voltage ranges 12 – 30 V AC/DC & 85 – 264 V AC covering all standard applications.
Meeting all relevant international standards, this attractive, co-ordinated product range will add significant value to any machine
or system.

M00
Colour

Description

Contact Blocks

LED Light Unit

Legend Plate(s)

VISTA Item No.

Black

Flush

1NO/1NC

-

Run, 1

M22-D-S-K11-P

Red

Extended

1NO/1NC

-

Stop, Off

M22-DH-R-K11-P

Green

Flush

1NO/1NC

-

Start, On

M22-D-G-K11-P

Red

Extended

1NO/1NC

12-30V AC/DC

Stop, Off

M22-DLH-R-K11-R-P

Red

Extended

1NO/1NC

85-264VAC

Stop, Off

M22-DLH-R-K11-230R-P

White

Flush

1NO/1NC

12-30V AC/DC

Run, 1

M22-DRL-W-K11-W-P

White

Flush

1NO/1NC

85-264VAC

Run, 1

M22-DRL-W-K11-230W-P

Red

-

-

12-30V AC/DC

Stop, Off, Fault

M22-L-R-R-P

Green

-

-

12-30V AC/DC

Start, On, Run

M22-L-G-G-P

Red

-

-

85-264VAC

Stop, Off, Fault

M22-L-R-230R-P

Green

-

-

85-264VAC

Start, On, Run

M22-L-G-230G-P

Red

Non-Illuminated Twist-torelease

1NO/2NC

-

Emergency Stop

M22-PVT-K12-P

Red

Illuminated Push-Pull

1NO/2NC

12-30V AC/DC

Emergency Stop

M22-PVL-K12-R-P

Red

Illuminated Push-Pull

1NO/2NC

85-264VAC

Emergency Stop

M22-PVL-K12-230R-P

Black

2 Position Momentary

1NO/1NC

-

0 I, Man Auto

M22-WKV-K11-P

Black

3 Position Momentary

1NO/1NC

-

I 0 II, Hand 0 Auto

M22-WK3-K22-P

Pushbutton

Control & Indication

Features & benefits:
•	 Ergonomic design ensuring ease of operation & bright illumination
•	 IP66 degree of protection as standard (many devices IP67, IP69K) for use in the harshest of industrial environments
•	 Vibration resistant LEDs giving a minimum life of 100,000 hours for improved reliability & high integrity
•	 Fitting in the standard 22.5 mm hole, the snap fitting modular system saves both assembly & fitting time

Illuminated Pushbutton

Indicating Light

Emergency Stop

Selector Switch

Complete units

M00
Description

Button Plate

Contacts

Item No.

Complete units for front mounting
Pushbutton actuators

Double actuators

Green

1NO

M22-D-G-X1/K10

Stop

Red

1NC

M22-D-R-X0/K01

With white LED element lens,
85 – 264 V AC

Green

1NO/1NC

M22-DDL-GR-X1/X0/K11/230-W

Start

White
Red

Emergency-Stop actuators

Selector switch actuators

Key-operated actuators

Key-release mushroom button
with 1 key, MS1 individual lock
mechanism

Red

1NC

M22-PVS/K01

Pull to release

Red

1NC

M22-PV/K01

Pull to release

Red

1NO/1NC

M22-PV/K11

Two positions, stay-put

–

1NO

M22-WRK/K10

Three positions, stay-put

–

2NO

M22-WRK3/K20

Two positions, stay-put, with
1 key

–

1NO/1NC

M22-WRS/K11

eaton corporation New Zealand Product Guide

239

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

Enclosed units

M00
Description

Button Plate

Contacts

Item No.

Start

1NO/1NC

M22-D-G-X1/KC11/I

Stop

1NO/1NC

M22-D-R-X0/KC11/I

Enclosed units for surface mounting

Control & Indication

Pushbutton actuators

240

Emergency-Stop actuator

Pull to release, yellow
enclosure

–

1NO/1NC

M22-PV/KC11/IY

Emergency-Stop key-release
mushroom button

Red actuator with 1 key

–

1NO/1NC

M22-PVS/KC11/IY

Key-operated selector switch

2 positions, stay-put, with
1 key

–

1NO/1NC

M22-WRS/KC11/I

Two-way pushbutton stations

Without indicator light

–

-

M22-I2-M1

With indicator light, white
LED element, 85 – 264 V AC

–

-

M22-I3-M2

Three-way pushbutton station

Without indicator light

–

-

M22-I3-M1

Four-way pushbutton station

Without indicator light

–

-

M22-I4-M1

eaton corporation New Zealand Product Guide

1/2

System overview
RMQ-Titan

Power Control
Moeller SK0211-1158GB-AUS

Control & Indication
Contact blocks
Fixing adaptor

RMQ - Titan

4-way
Pushbutton
actuators, IP67
selector switch
•	 Front ring titanium, also available in black
•	 Snap-fitting modular system
•	 Mounting diameter 22.3 mm
•	 Minimum grid dimensions 30 x 40 mm
4-way pushbutton
•	 Up to six contacts per location
•	 Switching of different potentials
•	 Worldwide approval

Contact blocks

Fixing adaptor
ActuatorsM00
Enclosure
Colour of button
plate/mushroom head

Description

Item No.

4-way
joystick
Flush
design
Flush actuator

Spring-return

Emergency-Stop
actuator

Green

M22-D-G

Red

M22-D-R

(I) Green

M22-D-G-X1

(O) Red

M22-D-R-X0

ContactBlack
blocks

Complete
Flush actuator
legend
plate

Pushbutton
actuator

Spring-return

button plate

M22-D-S

Yellow

M22-D-Y

White

M22-D-W

Blue

M22-D-B

Without button plate

for use with M22-D-X

Button plate/
button lens
Selector switch
actuator

M22-D-X

Black

M22-XD-S

White

M22-XD-W

Red

M22-XD-R

Green

M22-XD-G

Yellow

Telescopic clip

Blue

Control & Indication

Control circuit devices

22.5mm Pushbuttons

M22-XD-Y
M22-XD-B

Extended Design
Extended actuator

Spring-return

Key-operated
actuator

Black

Centring
adaptor

M22-DH-S

Red
Contact block

Spring-return, with guard ring

M22-DH-R

Green

M22-DH-G

Without

M22-DG-X

Mushroom actuators, IP67
-

Indicator
light

Spring-return

Contact blocks

Green

M22-DP-R

Black

M22-DP-S

Fixing Yellow
adaptor
Buzzer

Stay-put

Acoustic
indicator

Acoustic
Double actuator,
IP66 indicator cap

Top-hat rail
adaptor

Potentiometer

Stop-start button plate. Optional
indicator light M22-LED230-W
see page 281 Spring return, with
indicator light, white lens

M22-DP-G

Red

M22-DP-Y

Black

M22-DRP-S

Red

M22-DRP-R

Green

M22-DRP-G

Green

M22-DDL-GR-X1/X0

White
Red

Front rings

(Titanium appearance standard, black and gold options)

eaton corporation New Zealand Product Guide

241

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

ActuatorsM00
Description

Colour of mushroom head

Item No.

Control & Indication

Emergency-Stop actuators, IP66. Snap-action & positive non-tease action, yellow base
Pull to release. After actuation, plunger remains in the actuated
position.

Red

M22-PV

Twist to release. One or two contact blocks can be fitted.

Red

M22-PVT

Illuminated. Pull to release. After actuation, plunger remains in the
actuated position. One or two contact blocks can be fitted.

Red

M22-PVL

Key-operated, with 1 key

Red

M22-PVS

Sealable shroud. Transparent with collapse point, reusable after
Emergency-Stop operation. Suitable for M22-PV & M22-PVL
Emergency-Stop actuators & M22-PVS key-release mushroom
actuator.

–

M22-PL-PV

Foot & palm switches, IP67
Spring-return mushroom head

Red

FAK-R/KC11/I

Black

FAK-S/KC11/I

Stay-put, pull to release

Red

FAK-R/V/KC01/IY

Stay-put, pull to release

Red

FAK-R/V/KC11/IY

Emergency-Stop actuators, IP67

242

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

Fixing adapters, contact blocks

M00

Description

Contacts

Item No.

Front fixing, for 3 M22-K... contact elements & M22-LED... LED elements.

–

M22-A

For 4 contact blocks

–

M22-A4

Front fixing

1 NO

M22-K10

1 NC

M22-K01

1 NO

M22-KC10

1 NC

M22-KC01

1 NO, 1 NC

M22-AK11

1 NO

M22-AK10

1 NC

M22-AK01

Control & Indication

Fixing adapters

Contact blocks with screw terminals

Base fixing

Complete modules. Combination of contact elements with screw terminals & fixing adapter
Front fixing

LED elements

M00
Description

Rated operational
voltage, Ue , V

Front fixing

12 – 30 V AC/DC

Colour

Item No.

LED elements with screw terminals

85 – 264 V AC, 50/60 Hz

Base fixing

12 – 30 V AC/DC

85 – 264 V AC, 50/60 Hz

White

M22-LED-W

Red

M22-LED-R

Green

M22-LED-G

Blue

M22-LED-B

White

M22-LED230-W

Red

M22-LED230-R

Green

M22-LED230-G

Blue

M22-LED230-B

White

M22-LEDC-W

Red

M22-LEDC-R

Green

M22-LEDC-G

Blue

M22-LEDC-B

White

M22-LEDC230-W

Red

M22-LEDC230-R

Green

M22-LEDC230-G

Blue

M22-LEDC230-B

LED test elements
For non-interacting function test (lamp test) for connection to:

12 – 240 V AC/DC

–

M22-XLED-T

85 – 264 V AC

–

M22-XLED230-T

eaton corporation New Zealand Product Guide

243

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

Illuminated pushbutton actuators, indicator lights

M00

Description

Colour

Item No.

Illuminated pushbutton actuators, IP67
Spring-return

Control & Indication

Flush design

White

M22-DL-W

Green

M22-DL-G

Red

M22-DL-R

Yellow

M22-DL-Y

Blue

M22-DL-B

White

M22-DRL-W

Green

M22-DRL-G

Red

M22-DRL-R

Accessorie

Yellow

M22-DRL-Y

Coding	Adapter

Blue

M22-DRL-B

White

M22-DLH-W

Stay-put, press again to release.

Extended design

Spring-return

Coding Adapters
Adapter

Green

Description

For Use With…

Maintained to Momentary Operation

• Supplied with standard
switches
- • Used to convert Maintained operation to
Momentary operation

Indicator lights, IP67
Flush

Catalog Number

Price

M22-DLH-R

Yellow

M22-DLH-Y

Blue

Top
M22-DLH-B
affects Right
position (II)

M22(S)-WR(L)(K)(3)
M22-XC-Y
M22(S)-WRS(3) White

Green
Red

2.50

M22-L-W

Accessories

Key Withdraw to Non-Key Withdraw

Adapter

Extended, conical

Description

For Use With…

Catalog Number

-

Coding	Adapters

Green
M22-XC-R
Yellow

position (II)

• Supplied with standard
switches
M22(S)-WR(L)(K)(3)
M22-XC-Y
• Used to convert MainM22(S)-WRS(3)
tained operation to
coding adapters
Momentary operationfor selector switches

Bottom
affects Left
position (I)

Insert for Momentary
Two-position adapter configurations
Remove for Maintained
For converting between
stay-put,
- switch configuration)
(shading
indicates standard
spring-return & key release function
O

Used to convert
Key withdraw position
to non-key withdraw
position

O
I

-

O
I

maintained
-

Top
affects Right
maintained
position (II)

I

momentary

-

Key Withdraw Positions

spring-return function
M22(S)-WRS(3)
M22-XC-R

O2.50I

Top Slot

(affects right position)

Bottom Slot

(not implemented with
2-position switches)

O I

affects Left
position (I)

–

Insert for no key withdraw
–
–
Remove
for key withdraw

Three-position adapter configurations

(shading indicates standard switch configuration)

(shading indicates standard switch configuration)

Two-Position
Adapter
Configurations

O

I

O

I

maintained

I

maintained

Three-Position
Adapter
Configurations

momentary

Key Withdraw Positions

O I
Top Slot

O I

O I

–

(affects right position)

Bottom Slot

(not implemented with
2-position switches)

I

–

–

O
II

I

O
II

I

II

I

II

maintained

maintained

maintained

I O II

I O II

I O II

I O II

Top Slot

–

Bottom Slot

–

I

II

maintained

I

II

maintained

I

II

	

maintained

I

II

maintained

I

II

I

II

M22-LH-B
Insert for no key withdraw
Remove for key withdraw

M00

M22-XC-R

M22-XC-Y

O
I

O
II

I

O
II

I

O
II

I

II

momentary

I O II

O

O
II

I

O
II

I

I O II

I O II

I O II

–

Discount Schedule C10

I

I O II

–

–

TITAN-CAT-NA-0807

Switching Positions
eaton corporation
NewO Zealand Product
Guide
O
O
O
O
Three-Position
Adapter

Bottom
affects Left
position (I)

M22-LH-Y

Item No.

–

(shading indicates standard switch configuration)

244

M22-LH-R

Key Withdraw Positions

(affects left position)

Three-position adapter configurations

O

O

maintained

(affects right position)

–

Top
affects Right

Switching Positions

Switching Positions
O

M22-LH-W

OBottom
I

–

Two-position adapter configurations
O

The same slots
on keyed selector
switches are shared
between these two
different sets of
coding adapters.
All possible
combinations and
their effects are
detailed in the
tables below.

Colour

Switching Positions

Two-Position
Adapter
For converting between
stay-put &
Configurations

2.50

Blue

2.50

Description

Key Withdraw to Non-Key Withdraw

Red

M22(S)-WRS(3)

M22-L-B

M22-LH-G
position (II)

Pilot Devices

Used to convert
Key withdraw position
to non-key withdraw Top
position
affects Right

Set of

A

White

Price

The same slot
on keyed selecto
switches are share
between these tw
different sets o
coding adapter
All possibl
combinations an
their effects ar
detailed in th
tables below

M22-L-R
Insert for Momentary
Remove for Maintained
M22-L-Y

Blue

Maintained to Momentary Operation

Bottom
affects Left
position (I)

M22-L-G

Yellow

Coding Adapters

M22-DLH-G

Red

O
II

I

II

moellerNA.com

A77

Power Control
Control & Indication
22.5mm Pushbuttons
2, 3 & 4 positions

Selector switch actuators

M00
Function:
= Stay-put
= Spring-return
= V position

Description

Button plate

Front ring: titanium
Item No.

–

40°

M22-W

–

60°

M22-WR

–

40°

–

M22-WK

–

60°

–

M22-WRK

–

60°

–

M22-WKV

40°

40°

M22-W3

60°

60°

M22-WR3

40°

40°

–

M22-WK3

60°

60°

–

M22-WRK3

Rotary button

45°

–

M22-WR4

Thumb-grip

45°

–

M22-WRK4

2 positions, 60° turn,
stay-put

–

60°

–

M22-WRS

3 positions, 60° turn,
stay-put

60°

60°

–

M22-WRS3

Key for MS1 individual
lock mechanism

–

–

–

M22-ES-MS1

Rotary button

Thumb-grip

Thumb-grip, V position

Control & Indication

Selector switch actuators, 2 positions, IP66

Selector switch actuators, 3 positions, IP66
Rotary button

Thumb-grip

Selector switch actuators, 4 positions, IP66.

Key-operated actuators, IP66, with 1 key

Accessories
–Accessories
Coding	Adapters
Coding	Adapters

AA

Coding
Coding
Adapters
Adapters
Adapter
Adapter Description
Description

For UseFor
With…
Use With…
Catalog
Catalog
Number
Number
Price Price

Maintained
Maintained
to Momentary
to Momentary
Operation
Operation

2.50

2.50

Bottom Bottom
affects Left
affects Left
position position
(I)
(I)

Insert for
Insert
Momentary
for Momentary
RemoveRemove
for Maintained
for Maintained
Key Withdraw
Key Withdraw
to Non-Key
to Non-Key
Withdraw
Withdraw

Used to convert
Used to convert
Key withdraw
Key withdraw
position position
M22(S)-WRS(3)
M22-XC-R
M22-XC-R
to non-key
to withdraw
non-key withdraw M22(S)-WRS(3)
position position

Top
Top
affects Right
affects Right
position position
(II)
(II)

2.50

2.50

Pilot Devices

Top
Top
affects Right
affects Right
position position
(II)
(II)

Pilot Devices

• Supplied
• Supplied
with standard
with standard
switches switches
M22(S)-WR(L)(K)(3)
M22(S)-WR(L)(K)(3)
M22-XC-Y
M22-XC-Y
• Used to• convert
Used toMainconvert Main-M22(S)-WRS(3)
M22(S)-WRS(3)
tained operation
tained operation
to
to
Momentary
Momentary
operationoperation

The same
Theslots
same slots
on keyed
onselector
keyed selector
switches
switches
are shared
are shared
between
between
these two
these two
different
different
sets of sets of
coding coding
adapters.
adapters.
All possible
All possible
combinations
combinations
and and
their effects
their effects
are are
detailed
detailed
in the in the
tables below.
tables below.

Bottom Bottom
affects Left
affects Left
position position
(I)
(I)

Insert for
Insert
no key
forwithdraw
no key withdraw
RemoveRemove
for key withdraw
for key withdraw

Two-position
Two-position
adapter
adapter
configurations
configurations
(shading(shading
indicatesindicates
standard
standard
switch configuration)
switch configuration)

Switching
Switching
Positions
Positions
O

O

O

O

O

O

eaton corporation New Zealand Product Guide

245

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

Illuminated selector switch actuators, key-operated actuators

M00

Function:
= Stay-put
= Spring-return

Description

Colour of thumb-grip

Item No.

Illuminated selector switch actuators, IP66. Thumb grip handle
2 positions
Spring-return

Control & Indication

–

Stay-put

–

40°

White

M22-WLK-W

–

40°

Green

M22-WLK-G

–

40°

Red

M22-WLK-R

–

40°

Yellow

M22-WLK-Y

–

40°

Blue

M22-WLK-B

–

60°

White

M22-WRLK-W

–

60°

Green

M22-WRLK-G

–

60°

Red

M22-WRLK-R

Coding Adapters
Adapter

Description

For Use With…

Catalog Number

Price

–
Maintained to Momentary
Operation

60°

Yellow

M22-WRLK-Y

–

60°

Blue

M22-WRLK-B

Top
affects Right
position (II)

3 positions
–

40° • Supplied with standard
switches
• Used to convert Main40° tained operation to
Momentary operation

Spring-return

40°

M22(S)-WR(L)(K)(3)
M22(S)-WRS(3)

Adapter

Description

60°

M22-XC-Y

60°
M22-XC-R

M22(S)-WRS(3)

The same slots
on keyed selector
switches are shared
between these two
different sets of
coding adapters.
All possible
combinations and
their effects are
detailed in the
tables below.

Switching Positions
Two-Position
Adapter
Configurations

Used to convert
Key withdraw position
to non-key withdraw
position

M22(S)-WRS(3)

O
I

O
I

maintained

Top
affects Right
maintained
position (II)

I

momentary

Key Withdraw Positions

M22-XC-R

O2.50I

Top Slot

(affects right position)

Bottom Slot

(not implemented with
2-position switches)

O I

OBottom
I

–

affects Left
position (I)

–

Insert for no key withdraw
–
–
Remove
for key withdraw

Two-position adapter configurations

Three-position adapter configurations

(shading indicates standard switch configuration)

(shading indicates standard switch configuration)

Switching Positions

Switching Positions
O

Two-Position
Adapter
Configurations

O

O

I

O

I

maintained

I

maintained

Three-Position
Adapter
Configurations

momentary

Key Withdraw Positions

O I
Top Slot

O I

O I

–

(affects right position)

Bottom Slot

(not implemented with
2-position switches)

I

–

–

O
II

I

O
II

I

II

I

II

maintained

maintained

maintained

I O II

I O II

I O II

I O II

Top Slot

–

Bottom Slot

–

I

II

maintained

I

II

maintained

I

II

	

maintained

I

II

maintained

I

II

O
I

O
II

I

O
II

I

O
II

I

II

momentary

I O II

O

O
II

I

O
II

I

I O II

I O II

I O II

–

Discount Schedule C10

I

I O II

–

–

TITAN-CAT-NA-0807

Switching Positions
eaton corporation
NewO Zealand Product
Guide
O
O
O
O
Three-Position
Adapter

II

–

(shading indicates standard switch configuration)

246

I

Key Withdraw Positions

(affects left position)

Three-position adapter configurations

O

O

maintained

(affects right position)

–

M22-WRLK3-Y
YellowInsert for no key withdraw
Remove for key withdraw
M22-WRLK3-B
Blue

60°

Insert for Momentary
Two-position adapter configurations
Remove for Maintained
(shading indicates standard switch configuration)

Bottom
affects
Left
M22-WRLK3-R
position (I)

Red

60°

60°

Green

2.50

60°

Bottom
affects Left
position (I)

O

Top

White
affects Right

position (II)

2.50

Key Withdraw to Non-Key Withdraw

Blue

60°

position (II)

M22(S)-WR(L)(K)(3)
M22(S)-WRS(3)

A

40°

Pilot Devices

• Supplied with standard
switches
• Used to convert Maintained operation to
Momentary operation

The same slot
on keyed selecto
switches are share
between these tw
different sets o
coding adapter
All possibl
M22-WLK3-B
combinations an
their effects ar
M22-WRLK3-W
detailed in th
tables below
M22-WRLK3-G

M22-WLK3-R
Insert for Momentary
Remove for Maintained
M22-WLK3-Y
Yellow

40°

60° Used to convert
Key withdraw position
to non-key withdraw Top
affects Right
60° position

Bottom
M22-WLK3-G
affects Left
position (I)

Red

Coding	Adapters

For Use With…
Catalog Number 60° Price
Stay-put

Coding	Adapter

M22-WLK3-W

Green

40°

40°
Key Withdraw to Non-Key Withdraw
40°

Maintained to Momentary Operation

2.50

Accessories

40°

Coding Adapters

White

M22-XC-Y
40°

Accessorie

O
II

I

II

moellerNA.com

A77

Power Control
Control & Indication
22.5mm Pushbuttons
4 positions

Four-way operators

M00
Function:
= Stay-put

Description

= Spring-return

Inscription

For use with

Front ring: titanium Item No.

–

–

M22-WJ2H

–

–

M22-WJ2V

–

–

M22-WRJ4

–

–

M22-WJ4

No inscription, actuator
colour black

–

M22-D4-S

Inscription with direction
arrows, actuator colour: black

–

M22-D4-S-X7

Inscription with direction
arrows, actuator colour:
black, opposing buttons
mechanically interlocked

–

M22-DI4-S-X7

2 positions

4 positions

Control & Indication

Joysticks, IP66

Pushbuttons, 4-way, IP66
–

Labels
–

Blank

–

Joystick 4-way selector
switch actuators

M22-XCK

Direction arrows

–

Joystick 4 positions

M22-XCK1

Joystick 2 positions

M22-XCK3

4-way selector switch
actuators

M22-XCK2

0-1-0-2-0-3-0-4

–

eaton corporation New Zealand Product Guide

247

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

AccessoriesM00
Description

Number of ways

Item No.

Plastic, light grey

1

M22-H1

Plastic, light grey

2

M22-H2

Grey

–

M22-B

Black

–

M22S-B

Control & Indication

Shrouds, IP55

Blanking plugs, IP66. Round style, for blanking off reserve locations

Actuator diaphragms, IP67. Transparent diaphragms for severe environmental conditions & use in the food industry. Do not use with legend plates since degree of protection
is not guaranteed
For use with M22(S)-D(R)-... pushbutton actuators, M22(S)-DL-..., M22(S)-DRL-...,
illuminated pushbutton actuators, M22-D(C)-... flush indicator lights

–

M22-T-D

For use with M22(S)-DD(L)-... double actuators

–

M22-T-DD

Telescopic clips. For adjusting depth of rear mounting devices in CI enclosures & panels with a mounting depth of 115 – 155 mm. Stepless adjustment, screw fixing & snap
fitting (top hat rails to IEC/EN 60715). Maximum of 10 x M22-TC per enclosure, 5 of which can hold stay-put actuators. Do not use with Emergency-Stop actuators
For 3 contacts/LED elements, base fixing, with centering adapter

–

M22-TC

Extension for telescopic clip; for mounting depths up to 205 mm

–

M22-TCV

For fitting 22.3 mm diameter buttons into 30.5 mm diameter holes

–

M22S-R30

M22 x 1.5 mm

–

M22-GR

-

-

M22-AMC

Continuous tone

-

M22-XAM

Pulsed tone

-

M22-XAMP

Adapter rings. Set of adapter rings 30/22.3 mm, black, consists of adapter ring & lock nut

Threaded ring

Acoustic indicator housing IP40 
Black front, without buzzer

Buzzer - for use with M22-AMC
18 - 30 V AC/DC, 83 dB / 10 cm, 100 % DF, Positive pole connected to X1

 NEMA/UL Type 1.

248

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

AccessoriesM00
Description

Item No.

For threaded ring

M22-MS

IEC/EN 60715 top-hat rail, for front fixing

M22-IVS

Top-hat rail adapter

Plunger bridge. For actuating the middle contact element of the M22-W...3 non-illuminated 3-position selector switch actuator
Middle contact of 3-position selector switch, non-illuminated, (1 off) black

Control & Indication

Combination box spanner

M22-XW

Guard ring, IP66. To protect against accidental operation
For pushbutton & selector switch actuators

M22-XGWK

Front ring: gold (24 carat). Front ring not supplied individually: To order exclusively via Moeller Sales Offices as M22-Combination-* (customised complete units).
–

M22-FR-AU

–

M22-DZ-B-GB14

IP65 external reset button

Description

Circuit symbol

Resistance, R, kW

Item No.

1

M22-R1K

4.7

M22-R4K7

10

M22-R10K

47

M22-R47K

100

M22-R100K

470

M22-R470K

Colour

Item No.

Potentiometers, IP66
3 individual screw terminals, Pmax =
0.5 W Accuracy of resistance value:

±10% (linear)

Description

Inscription

Emergency-Stop labels, IP66
Lettering black, 30 X 50 mm

Diameter = 90 mm

Emergency-Stop

Yellow

M22-XZK-GB99

Blank

Yellow

M22-XZK

Emergency-Stop in 4 languages

Yellow

M22-XAK1

Legend holders without label, IP66. Round, black
For actuators, 30 x 50 mm

–

Black

M22S-ST-X

For double actuators, 30 x 75 mm

–

Black

M22S-STDD-X

Insert plate for legend holder

Blank

Aluminium

M22-XST

eaton corporation New Zealand Product Guide

249

Power Control
Control & Indication
22.5mm Pushbuttons
RMQ - Titan

Surface mounting enclosures, flush mounting plates

M00

Number of ways Qty.

Colour

Item No.

Surface mounting enclosures

Control & Indication

1

White

M22-I1

2

M22-I2

3

M22-I3

4

M22-I4

6

M22-I6

Description

Number of ways Qty.

Colour

Item No.

Flush mounting plates: Legend plates cannot be used if pushbuttons are fitted in vertical column without apertures, if required.

250

Aluminium with yellow paint
finish for Emergency-Stop buttons

1

Yellow

M22-EY1

Aluminium, light anodized

1

White

M22-E1

eaton corporation New Zealand Product Guide

2

M22-E2

3

M22-E3

4

M22-E4

5

M22-E5

6

M22-E6

SmartWire-Darwin.
Cost-optimized communication for switchgear
Controlling

Manufacturers of machines and systems strive to achieve a balance between
the maximum level of functionality and cost optimization. SmartWire-Darwin

Operation &
monitoring

Protecting

is a communication system for industrial switchgear based on the concept of

Darwin Technology

continued development in the control panel and in the peripherals:

from control through to protection and switching, and extending to driving,
operation and monitoring.
A technology that benefits you, both now, and in the future.

Switching

Drives

The easy way to connect.
SmartWire-Darwin

Technology
The cost-optimised communication systemDarwin
for switchgear

SmartWire-Darwin.
Cost-optimized communication for switchgear
SmartWire-Darwin: The easy way to connect.

Controlling

SmartWire-Darwin reduces the wiring effort and expense with many switchgear systems by more than 60% and helps
along the entire value-added chain – fromManufacturers
the design to the
to systems
the commissioning
up to system
expansion
–
of construction,
machines and
strive to achieve
a balance
between
in the reduction of costs. SmartWire-Darwin relies on the tried-and-tested Eaton Moeller industrial switchgear and grants
the maximum level of functionality and cost optimization. SmartWire-Darwin
intelligent communication features.

Protecting

is a communication system for industrial switchgear based on the concept of

Efficient planning and
engineering

Operation &
monitoring

continued development in the control panel and in the peripherals:

Fault-free
from control
throughmounting
to protection and switching,
andto
extending
to driving,
Quick
commission
and wiring

operation and monitoring.

A technology that benefits you, both now, and in the future.
Switching

Comfortable
operation

Maintenance with
direct diagnostics

Simple to expand

2

W0211-7601.indd 2

01.04.2010 14:23:36 Uhr

For further Information:

0508 328 6669

www.eaton.co.nz

Drives

SK1158GB-INT.book Seite 18 Donnerstag, 2. Oktober 2008 2:27 14

1/18
System
overview
Power
Control
towers
ControlSL&signal
Indication
Moeller SK0211-1158GB-AUS

Control & Indication

Control circuit devices

SL signal towers

Top cover

Continuous
light module

Gasket

Caps with grooved lenses for enhanced light distribution
Flashing
light module

Gasket

Strobe
light module

Gasket

Acoustic
indicator
module

Gasket

90 metal fixing bracket

Gasket
Base
module

Stand with
100 mm spacer

252

eaton corporation New Zealand Product Guide

250 mm spacer option

Power Control
Control & Indication
SL signal towers
Signal tower modules
Mounted on top of a machine or control panel SL signal towers provide operating staff,
working near or at a distance, with information about a machine’s operation, stoppage,
interruption in material flow or, for example, fault alarms. Consequently any problems or
faults can be indicated & resolved quickly.

Features & benefits:
•	 Individual modules can be combined as required, enabling users to
assemble their own combinations
•	 Modules are freely programmable by simply setting jumpers on the
module board
•	 Fitting modules together is quick & easy with no tools required
– simply plug on the bayonet fitting & turn slightly
•	 Rated as standard to IP54, with an IP65 option for use in harsher environments

M00
Description

Colour

Control & Indication

The user has the choice of four types of indicator: continuous, flashing, or strobe light
&/or an audible alarm. Choose between filament bulbs, or LEDs for more critical
applications – specially shaped lenses ensure excellent visibility from all directions.

Item No.

Base module, IP54
With screw terminals & top cover

Black

SL-B

Without filament lamp/LED

Blue

SL-L-B

Green

SL-L-G

Continuous light modules, IP54

Red

SL-L-R

White

SL-L-W

Yellow

SL-L-Y

eaton corporation New Zealand Product Guide

253

Power Control
Control & Indication
SL signal towers
M00
Description

Colour

Item No.

Flashing light modules, IP54
24 V AC/DC Without filament lamp/LED

Control & Indication

110 – 130 V AC Without filament lamp/LED

240 V AC Without filament lamp/LED

Blue

SL-BL24-B

Green

SL-BL24-G

Red

SL-BL24-R

White

SL-BL24-W

Yellow

SL-BL24-Y

Blue

SL-BL130-B

Green

SL-BL130-G

Red

SL-BL130-R

White

SL-BL130-W

Yellow

SL-BL130-Y

Blue

SL-BL230-B

Green

SL-BL230-G

Red

SL-BL230-R

White

SL-BL230-W

Yellow

SL-BL230-Y

Red

SL-FL24-R

White

SL-FL24-W

Yellow

SL-FL24-Y

Strobe light modules, IP54
24 V AC/DC With flash tube

110 – 130 V AC With flash tube

240 V AC With flash tube

Red

SL-FL130-R

White

SL-FL130-W

Yellow

SL-FL130-Y

Red

SL-FL230-R

White

SL-FL230-W

Yellow

SL-FL230-Y

Acoustic indicator modules, IP20
Continuous tone
12 – 36 V AC/DC

SL-A24

110 – 240 V AC/DC

SL-A110-230

Pulsed tone

254

12 – 36 V AC/DC

SL-AP24

110 – 240 V AC/DC

SL-AP110-230

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
SL signal towers
Accessories 

M00
Description

Colour

Item No.

100 mm

Black

SL-F100

250 mm

Black

SL-F250

Fixing brackets
90°, metal

–

SL-FW

24 V DC

–

SL-L24

110 – 130 V AC

–

SL-L130

240 V AC

–

SL-L230

Filament lamps, BA 15d, 5 – 7 W

Control & Indication

Stand with spacer

Multiple LED, BA 15d
18 – 30 V AC/DC

Blue

SL-LED-B

Green

SL-LED-G

Red

SL-LED-R

White

SL-LED-W

Yellow

SL-LED-Y

Set of gaskets
For increasing the degree of protection to IP65
(not for the acoustic indicator), 4 gaskets for use
with 3 modules

–

SL-IP65

eaton corporation New Zealand Product Guide

255

Power Control
Control & Indication
30.5mm Pushbuttons

Standard Pushbuttons

Eaton’s 30.5mm pushbuttons are versatile, durable, rugged, & stand the test of time in
even the most hostile environments.

Chrome, T Series Pushbuttons

The range includes momentary, illuminated & mushroom head pushbuttons, selector
switches, indicating lights & push-pull units.
The T Series Chrome 30.5 mm pushbutton line features a zinc die cast construction with
chrome-plated housing & mounting nut. The same durable construction is also available with
the corrosive resistant E34 line of pushbuttons.

Control & Indication

All operators are IP66 rated to protect against dirt & moisture. Additionally, most devices
come complete with grounding hardware to prevent electrical shock. Rugged metal
construction, handsome appearance, extra features, & competitive prices makes Eaton’s
30.5mm range of pushbuttons the logical choice for OEM’s & board builders looking for
value, durability, & reliability.

Features
•	 Die-cast metal housings create robust & heavy-duty devices that can
endure repetitive & heavy handed use in industrial environments.
•	 IP66 rated for protection against dirt & moisture.
•	 The corrosion resistant E34 range can with stand extremely harsh
environments.
•	 Contact blocks are colour coded (green for N.O. & red for N.C.) to
permit easy identification & troubleshooting.
•	 Up to 6 contact blocks can stack on each other, allowing for up to 12
circuits per operator.
•	 Heavy-duty zinc die cast construction
•	 Enclosed silver contacts with reliability nibs
•	 All normally closed contacts have positive opening operation, i.e.,
normally closed contacts are forced open in the event of contact weld
or spring breakage.
•	 Diaphragm seals with drainage holes
•	 Grounding nibs on the operator casing.
•	 Logic level contact blocks have palladium tipped contacts to ensure
circuit integrity down to 1mA @ 5V AC/DC.
•	 Bright, long-lasting & vibration-proof LED’s are available for illuminated
operators.

Chrome
The 30.5 mm pushbutton line features a zinc die cast construction with chrome-plated
housing & mounting nut.
Applications for the Chrome Operators:
Aggregate
Automotive
Construction Vehicles
Industrial Equipment
Material Handling
Metal Forming
Metal Stamping
Mining
Petrochemical
Pulp & Paper

Corrosion Resistant, E34 Pushbuttons

Standards
CE EN60947-5-1
•	 UL 508 — File No. 131568
•	 CSA C22.2 No. 14 — File No. LR68551
•	

Contact Blocks
Eaton’s contact blocks feature enclosed silver contacts with pointed “reliability nibs” for
reliable performance from logic level up to 600V. To ensure reliable switching, nibs bite
through oxide which can form on silver contacts, eliminating the need for expensive logic
level blocks for most applications. Reliability nibs improve performance in dry circuit,
corrosive, fine dust & other contaminated atmospheres. Under normal environmental
conditions, the minimum operational voltage is 5V & the minimum operational current is
1 mA, AC/DC. For operation under a wider range of environmental conditions, logic level
contact blocks with inert palladium tipped contacts are recommended. Diaphragm Seal with
Drainage Holes Eaton’s pushbutton operators offer front-of-panel drainage via holes in the
operator bushing. Hidden from view by the mounting nut, these holes prevent buildup of
liquid inside the operator, which can prevent operation in freezing environments. The holes
also provide a route for escaping liquid in high pressure washdowns, effectively relieving
pressure from the internal diaphragm seal, ensuring reliable sealing every time.

Corrosion Resistant
Eaton’s Corrosion Resistant E34 Range of 30.5 mm pushbuttons features the same rugged
die cast construction of our T Series with an additional two-layer 100% solid thermosetting
cathodic epoxy coating. This coating provides a smooth flat black smooth, flat back,
corrosion resistant surface that has passed a demanding 600 hour salt spray test.
Applications for Corrosion Resistant Operators:
Automotive
Chemical Plants
Food & Beverage

Grounding Nibs

Food Service Equipment

Most operators have green earthing screws to prevent electrical shock. Operators also have
“grounding nibs” — four metal points on the operator casting designed to bite through
most paints & other coatings on metal panels to enhance the ground connection when the
operator is securely tightened.

Industrial Equipment
Mining
Pulp & Paper
Waste Water Treatment Plants
Ultraviolet Light
E34 cathodic coating is not recommended for use in applications where exposure to
ultraviolet light exists, use chrome operators.

256

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
30.5mm Pushbuttons

Contact Blocks

Standard Pushbuttons, Flush, Extended & Half-Shrouded Buttons

T1P

Flush ButtonC11
Chrome

Corrosion Resistant

Black

T101

E34PB1

Red

T102

E34PB2

Green

T103

E34PB3

Yellow

T104

E34PB4

Grey

T105

-

White

T106

E34PB5

Brown

T107

-

Blue

T108

E34PB6

T57

Standard Contact BlocksC11
Description

Part. No.

1NO 1NC

T1P

2NO

T2P

2NC

T3P

1NC

T51P

1NO

T53P

2NO 2NC

T44

1LONC 1ECNO

T55

1ECNO 1NO

T57

1LONC

T71

2LONC

T45

Control & Indication

Colour

T44

Base Mounted Contact BlocksC11
Description

Part. No.

1NO 1NC

T6

Corrosion Resistant

2NO

T7
T8

Extended ButtonC11
Colour

Chrome

Black

T111

E34EB1

2NC

Red

T112

E34EB2

1NC

T52

Green

T113

E34EB3

1NO 1NC

T54

E34EB4

1LONC 1ECNO

T56

1LONC 1ECNO

T58

Yellow

T120

White

T116

-

Blue

T118

E34EB6

Half-ShroudedC11
Colour

Chrome

Corrosion Resistant

Black

T501

E34EVB1

Red

T502

E34EVB2

Green

T503

E34EVB3

Yellow

T504

E34EVB4

Blue

T508

E34EVB6

Step 1
Select Pushbutton
operator above.

Logic Level Contact BlocksC11
Description

Part. No.

1NO 1NC

T1E

2NO

T2E

2NC

T3E

1NC

T51E

1NO

T53E

NO = Normally Open, NC = Normally Closed, LONC = Late Open Normally Closed,
ECNO = Early Close Normally Open, Logic Level contact blocks have palladium contacts.

Step 2
Select contact block
from Page 295

eaton corporation New Zealand Product Guide

257

Power Control
Control & Indication
30.5mm Pushbuttons

Standard Pushbuttons, Mushroom Operators Accessories

Mushroom Operators Momentary

Mushroom Button 38.1mmC11
Chrome

Corrosion Resistant

Description

Item No.

Black

T121

E34LB1

Padlock Assembly Kit

6-A474

Red

T122

E34LB2

Replacement Locking Tongue

6-A475

Green

T123

E34LB3

Padlock with Chain

52-A1617

Yellow

T124

E34LB4

Blue

T129

E34LB6

Control & Indication

Colour

Legend PlatesC11
Engraving

Material

STOP Pull to reset

Metal

D2179-53CP

STOP Pull to reset

Plastic

E34LP179

* For use with push-pull mushroom operators maintained.

Palm Head Button 63.5mm ZincC11
Colour

Chrome

Corrosion Resistant

Black

T171

E34JB1

Red

T172

E34JB2

Red (Emergency Stop)

T17213

E34JB2N

Green

T173

E34JB3

Push-Pull Mushroom Operators Maintained

T129P

T176P

Push-Pull Operators Complete PadlockableC11
Head Diameter

Colour

Material

Chrome

Corrosion
Resistant

45mm

Red

Zinc

T129P

E34129P

63.5mm

Red

Zinc

T176P

E34176P

T129M

E34129S

Push-Pull Operators Complete Non-PadlockableC11
Head Diameter

Colour

Material

Chrome

Corrosion
Resistant

38mm

Red

Plastic

T129S

E34129S

45mm

Red

Zinc

T129M

E34129M

63.5mm

Red

Zinc

T176M

E34176M

Step 1
Select pushbutton
operator above.

258

Accessories for Complete Push-Pull Operators*C11

Step 2
Select contact block
from Page 295

eaton corporation New Zealand Product Guide

Item No.

Power Control
Control & Indication
30.5mm Pushbuttons

Push-Pull Operator Components

Mushroom Operator Components

Bare Shaft Operator for Mushroom or Palm PushbuttonC11
Description

Item No.

Momentary, Spring Return

T100

Auto-Latch - Twist Base to Release

T140

Description

Position

Chrome

Corrosion Resistant

Maintained Push & Pull

2

T5

E34GDB

Momentary Push & Pull

3

T4

E34GEB

Maintained Push &
Momentary Pull

3

T9

E34GFB

38.1 Mushroom Button for bare shaft operatorsC11
Colour

Item No.

38.1mm Mushroom Button for Push-Pull OperatorsC11

Black

T281

Description

Red

T282

38.1mm Operator Head

Black

E34C1

Green

T283

38.1mm Operator Head

Red

E34C2

Yellow

T284

38.1mm Operator Head

Red (Emergency Stop)

10250TB63

Blue

T288

38.1mm Operator Head

Green

E34C3

63.5mm Palm Button (Anodized Aluminium)
for bare shaft operatorsC11
Colour

Item No.

Black

T291

Red

T292

Green

T293

Colour

Select bare
shaft operator
above

Step 2

Description

Select
Mushroom
button from
above

Step 3
Select contact
block from
page 295

Item No.

63.5mm Palm Button (Anodized Aluminium)
for Push-Pull OperatorsC11
Colour

Item No.

65mm Operator Head

Red

E34J2

65mm Operator Head

Red (Emergency Stop)

E34J2N8

Step 1
Step 1

Control & Indication

Push-Pull OperatorsC11

Select pushpull operator
above

Step 2
Select
Mushroom
button from
above

Step 3
Select contact
block from
page 295

eaton corporation New Zealand Product Guide

259

Power Control
Control & Indication
30.5mm Pushbuttons

Indicating Light Units

Illuminated Operators, Indicating Light Lenses

Direct Voltage Indicating Light UnitC11
Plastic LensesC11

Control & Indication

Colour

Plastic

Description

Voltage

Chrome

Corrosion Resistant

Direct voltage - order
bulb separately

6 - 240V

T197N

E34FB197L*

Red

E34H2

Green

E34H3

See page 301 for bulbs. Can be used with LEDs.

Amber

E34H9

*LED only 6-240V

Clear

E34H0

Yellow

E34H4

White

E34H5

Blue

E34H6

Incandescent Bulb Indicating Light UnitsC11
Description

Voltage

Chrome

Corrosion Resistant

With incandescent
bulb supplied

6

T197N/2

E34FB06

12

T197N/3

E34FB12

24

T197N/4

E34FB24

48

T197N/5

E34FB48

Glass Lenses (Chrome)C11
Glass (Chrome)

110

T197N/7

E34FB110

Red

TC7N

240

T197N/8

E34FB240

Green

TC8N

Amber

TC9N

Clear

TC11N

White

TC12N

Description

Voltage

Chrome

Corrosion Resistant

Blue

TC10N

Transformer Type
6V Secondary
bulb supplied

110/120

T181N

E34TB120

220/240

T182N

E34TB240

380/415

T183N

E34TB380

440/480

T184N

E34TB480

550/600

T185N

E34TB600

415

-

E34TB415

Colour

Transformer Type Indicating Light UnitsC11

Glass Lenses (Corrosion Resistant)C11
Colour

Glass (Corrosion Resistant)

Red

E34G2

Green

E34G3

Amber

E34G9

Clear

E34G0

Yellow

E34G4

White

E34G5

Blue

Description

Voltage

Chrome

Corrosion Resistant

Resistor Type
120V bulb supplied

110/120

T201N

E34RB120

220/240

T202N

E34RB240

E34G6

Step 1
Select lens from
this page

260

Resistor Type Indicating Light UnitsC11

Step 2
Select indicating
light from above

eaton corporation New Zealand Product Guide

Step 3
Select bulb if not
supplied with
indicating light

Step 4
Select contact block
from page 295

Power Control
Control & Indication
30.5mm Pushbuttons

Illuminated Pushbutton Light Units

Illuminated Operators, Illuminated Pushbutton Lenses

Illuminated Pushbuttons - Direct VoltageC11
Plastic Illuminated LensesC11
Plastic

Red

E34V2

Green

E34V3

Amber

E34V9

Clear

E34V0

Yellow

E34V4

White

E34V5

Blue

E34V6

Supply Voltage

Chrome

Corrosion Resistant

Direct Voltage
Order bulb separately

6-240V

T441

E34CB497L*

See page 301 for bulbs. Can be used with LEDs.
*LED only 6-240V.

Control & Indication

Colour

Description

Illuminated Pushbuttons - Transformer TypeC11
Description

Supply Voltage

Chrome

Corrosion Resistant

Transformer type
6V secondary
bulb supplied

110/120

T411

E34XB120

220/240

T412

E34XB1240

380/415

T413

E34XB380

440/480

T414

E34XB480

Glass Illuminated Lenses (Chrome)C11
Colour

Glass (Chrome)

Red

TC13N

Green

TC14N

Amber

TC15N

Clear

TC17N

White

TC18N

Blue

TC16N

Press-To-Test Light Units

Press-To-Test Indicating Lights - Direct VoltageC11
Description

Supply Voltage

Chrome

Corrosion Resistant

Direct voltage
order bulb separately

6-240V

T230N

E34FPB

380/415

T413

E34XB380

See page 301 for bulbs. Can be used with LEDs.

Glass Illuminated Lenses (Chrome)
(Corrosion Resistant)C11
Colour

Glass (Chrome)

Press-To-Test Indicating Lights - Transformer TypeC11
Description

Supply Voltage

Chrome

Corrosion Resistant

Transformer Type
6V, 1W secondary
bulb supplied

110/120

T221N

E34TPB120

220/240

T222N

E34TPB240

380/415

T223N

E34TPB380

Red

E34P2

Green

E34P3

Amber

E34P9

Clear

E34P0

Description

Supply Voltage

Chrome

Corrosion Resistant

Yellow

E34P4

110/120

T231N

E34RPB120

White

E34P5

Resistor Type
120V, bulb supplied

220/240

T240N

E34RPB240

Blue

E34P6

Step 1
Select lens from
this page

Step 2
Select light from
this page

Press-To-Test Indicating Lights -Resistor TypeC11

Step 3
Select bulb if not
supplied with
indicating light

Step 4
Select contact block
from page 295

eaton corporation New Zealand Product Guide

261

Power Control
Control & Indication
30.5mm Pushbuttons

Light Units for Illuminated Push-Pull Operators

Illuminated Operators, Push-Pull Mushroom Lenses

Direct Voltage Light Modules for Push-Pull OperatorsC11
Standard Push-Pull LensesC11

Control & Indication

Colour

Item No.
E34M2

Red (Emergency Stop)

E34M2N8

Green

E34M3

Amber

E34M9

Clear

E34M0

White

E34M5
E34M6

Voltage

Item No.

6-240V

10250T70

NNote: Order bulb separately. See page 301 for bulbs. Can be used with LEDs.

Red

Blue

Description
Direct Voltage

Transformer Type Light Modules
for Push-Pull OperatorsC11
Description

Voltage

Item No.

Transformer Type
6V secondary
bulb supplied

110/120

10250T63

220/240

10250T65

380/415

10250T66

440/480

10250T67

Side Lighted Anodised Aluminium LensesC11
Colour

Item No.

Red

10250TC57

Red (Emergency Stop)

10250TC63

Green

10250TC58

Amber

10250TC64

Clear

10250TC62

White

10250TC61

Blue

10250TC59

Resistor Type Light Modules for Push-Pull OperatorsC11
Description

Voltage

Item No.

Resistor Type
120V bulb
supplied

120

10250T80

240

10250T81

Illuminated Push-Pull Operators

Illuminated Push-Pull OperatorsC11
Description

Supply Voltage

Chrome

Corrosion
Resistant

Maintained Push & Pull

2

T5

E34GDB

Momentary Push & Pull

3

T4

E34GEB

Maintained Push & Momentary
Pull

3

T9

E34GFB

Step 1
Select lens from
this page

262

Step 2
Select push-pull
operator from
this page

eaton corporation New Zealand Product Guide

Step 3
Select light unit
from above

Step 4
Select bulb if not
supplied with
light unit

Step 5
Select contact block
from page 295

Power Control
Control & Indication
30.5mm Pushbuttons
Illuminated Operators, Bulbs

Incandescent BulbsC11
Watts

Item No.

6.3V

0.9W

28-2225-33

12V

1.2W

21BA9S12
28-2225-13

24V

1.2W

30V

1.2W

21BA9S30

130V

2.2W

28-2225-24

Control & Indication

Supply Voltage

Bright LED Bulbs - Single Chip (AC/DC)C11
Colour

6V

12V

24V

Red

BA9SL6R

BA9SL12R

BA9SL24R

Green

BA9SL6V

BA9SL12V

BA9SL24V

Yellow

BA9SL6G

BA9SL12G

BA9SL24G

White

BA9SL6W

BA9SL12W

BA9SL24W

Bright LED Bulbs - Single Chip (AC/DC)C11
Colour

110V

240V

Red

BA9SL110R

BA9SL240R

Green

BA9SL110V

BA9SL240V

Yellow

BA9SL110Y

BA9SL240A

White

BA9SL110W

BA9SL240W

Super Bright LED Bulbs (Recognisable in outdoor
daylight applications - AC/DC)C11
Colour

6-12V

24V

120V

Red

E22LED612RN

E22LED024RN

E22LED120RN

Green

E22LED612GN

E22LED024GN

E22LED120GN

Yellow

E22LED612YN

E22LED024YN

E22LED120YN

White

-

-

E22LED120WN

Neon BulbsC11
Supply Voltage

Colour

110V

Clear

Item No.
21BA9S110N

240V

Clear

21BA9S240N

240V

Green

21BA9S240NG

240V

Red

21BA9S240NR

eaton corporation New Zealand Product Guide

263

M

M

Power Control
M

M

M

Control & Indication
M
M

S

30.5mm Pushbuttons

Selector Switch Knobs & Levers

Selector Switch Operators

1

M

S

2

3

4

M

M
2 Position
Selector SwitchesC11
S

S

Knobs & Levers

Description
(M = Maintained,
S = Spring Return)
M

M

T4011

E34VFB

MM
M
M

Image

Item No.

Plastic

1

E34K1

Metal

2

T341M

Plastic

3

E34L1

Plastic

4

E34A1*

E34VEB

MS

M

* For maintained operators only.

M
M

3 Position Selector Switches

C11

M

M
M
Description
M M M
(M M
= Maintained,
M
S
S = Spring Return)

Chrome

Corrosion
Resistant

2

T4022

E34VGB

3

T4023

E34VHB

S
M

4

T4024

-

6

T4026

-

2

T4032

E34VJB

M
S

3

T4033

E34VKB

M

2

T4042

E34VLB

S M M MM
S

3

T4043

E34VMB

M

M
S
M
M
S

M

M

S
M

M

S
M
M

M

S
M

S
M
M

MM
SM
M
M

S
MM
M S
S
M

2

T4052

E34VNB

3

T4053

E34VPB

4 Position Selector Switches
Description
SM
MM
M
S
(M = Maintained,
M
S
M
M
S = Spring Return)

Cam
Code*

Chrome

Corrosion
Resistant

Maintained

7

T4067

E34VTB

SCam Selection
S
* SeeM
S Chart to determine cam code.

M

T1P

T2P

T3P

C11

M

M

Item No. of
contact block

T1P

M

M

Selector Switches & Joystick Operators, Cam Selection Guide

Cam Selection Chart Showing Contact Sequence
Cam
Code*

M
S

M
M

Circuit 

M

M

M

S

Choose selector
switch operator
from previous page

Step 2
Choose cam based on contact
sequence from cam selection
guide table above (applies to 3
position selector switches only)

eaton corporation New Zealand Product Guide

C11

2 position
selector
switch

3 position selector switch

Cam
code
no. 1

Cam
code
no. 2

Cam
code
no. 3

Cam
code
no. 4

Cam
code
no.6

Cam
code
no.7
XOOO

4 position
selector
switch

A.N.C.

XO

OXO

OXX

XOO

XOO

B.N.O.

OX

OOX

OOX

OXO

OXO

OXOO

A.N.O.

OX

XOX

XOO

OXX

OOX

OOXO

B.N.C.

XO

XXO

XXO

XOX

OOX

OOOX
OOXO

A.N.O.

OX

XOX

XOO

OXX

OOX

B.N.O.

OX

OOX

OOX

OXO

OXO

OXOO

A.N.C.

XO

OXO

OXX

XOO

XOO

XOOO

B.N.C.

XO

XXO

XXO

XOX

OOX

OOOX

Switching angle 60o between each position. Rated for AC only. Refer to actual installation instructions given with
each switch for additional switching combinations. To determine the number of the cam you require & the correct
contact block, select the contact sequence desired from table above. O = contacts open, X = contacts closed. The
cam number is shown at top of column. The Item number of the appropriate contact block is shown in column 1.
at extreme left of table.
 Each contact block contains two contact circuits. The top set of contacts is identified as ‘Circuit A’ & the lower
set as ‘Circuit B’ is indicated in the table. The chart shows the contact arrangements with the three contact
blocks available & in each operator position. Additional contacts are obtainable by stacking contact blocks up to a
maximum of 6 blocks (12 circuits). A maximum of 2 can be used with cam 6.

M

Step 1

264

Material

Knob

Lever
T4081

C11

Description

M
M

M
M

Control & Indication

Chrome

Corrosion
Resistant

Step 3
Choose knob or lever
from above

Step 4
Select contact block
according to cam
selection guide
above

M

M

Power Control

M
M

M

Control & Indication

M

30.5mm
Pushbuttons
M
S
Key Operated Selector Switches
M
S

M

M
S
S
2 Position
Key Operated Selector Switches

M

M

M
M

MM

M

S

Cam

Key Removal

Chrome

-

Right & Left

T15113

E34KFB3

-

Left Only

T15712

E34KEB2

Control & Indication

2 Position

C11
Corrosion
Resistant

M
M

M

M
M

S

M

M

3M
Position
Key Operated Selector Switches
M
M
M
Cam*

Key Removal

Chrome

Corrosion
Resistant

2

Left Right &
Centre

T15227

E34KGB7

3

Left Right &

T15237

E34KHB7

M

3 SPosition M
M

M

M

M
M

M
M

M
M
M

S

M
M

S

M
M
M

M

M
S

Centre

S

M

M

S
S

4

Left Right &
Centre

T15247

-

6

Left Right &

T15267

-

Centre

M

M
M
M

S
S
M

C11

M

2

Right & Centre

T15325

E34KJB5

M
M

3

Right & Centre

T15335

E34KKB5

S
M

S

S

M
M

S
S

2

Centre Only

T15424

E34KLB4

3

Centre Only

T15434

E34KMB4

S
S

* See page 302 for cam selection guide.
M
M
MM
M
M

M
M
MM
M
M

Spare
Key
M
S

C11

M
S
Description
M
S

Item No.

Replacement Keys (2)

TA152

NNote: Other key codes are available contact Eaton for more information.

Step 1
Choose key
selector switch
operator
from this page

Step 2
Choose cam based on contact
sequence from cam selection
guide table on page 302
(applies to 3 position selector
switches only)

Step 3
Select contact block
according to cam
selection guide on
page 302

eaton corporation New Zealand Product Guide

265

Power Control
Control & Indication
30.5mm Pushbuttons

Two-Position Joystick Operators - Contact Block Operation
Figure 1, A and B Mounting Location

Selector Switches & Joystick Operators, Joystick Operators

Control & Indication

Two-Position Joystick Operators
The device mounts in the standard 30.5 mm mounting hole.

Locating Nib

Four-Position Joystick Operators
The joystick operated control unit is intended for AC application only. The panel area required
for the 4-position operator is equivalent to two standard pushbutton operators.

Top
Contacts

Latched Joystick Operators
The latch holds the lever in the centre position. The trigger latch must be released before
lever can moved into any position.

Bottom
Contacts
Up
NC Contact
at Top Is
Closed, NO
at Bottom
Is Closed

2 position Operator

2 Position Joystick Operator

C11

Description

Item No.

2 position Operator - Momentary Up & Down

T452

Up
Center
Down
Centre
All NC and NO
Contacts Are
Open (1/2 Way),
Late Opening
NC Is Closed

Down
NC Contact
at Bottom
Is Closed,
NO at Top
Is Closed

Figure 47-97. A and B Mounting Location

Contact Block Selection & Mounting
Handle Position
Up

Centre

Down

Contact Block

Mounting Location

Item No.

Top

Bottom

A

B

Type

Latched Operator
Left

Centre

Right

X

O

O

T51P

1NC

O

O

X

T51P

1NC

O

X

O

T45

2LONC

X
O

O
O

O
X

T3P

1NC
1NC

X
O

X
X

O
X

T45

1LONC
1LONC

X
O
O
V

O
O
O
O

O
X
X
O

T44

1NC
1NO
1NC
1NO

4 Position Joystick Operators (Spring Return ONLY) C11
Description

Item No.

4 position - Without Latch

T450

4 position - With Latch

T460

4 position without latch

4 Position Joystick Operators (Maintained)C11
Description

Item No.

4 position - Without Latch

10250T451_*

4 position - With Latch

10250T461_*

*Maintained Position
For maintained position (non-spring return), locate required maintained position or positions of operating lever in
the Maintained table below & add appropriate Suffix Number to the Item Number selected from the table above.

Maintained Positions

266

C11

Up

Down

Left

Right

Suffix No.*

X

—

—

—

1

—

X

—

—

2

—

—

X

—

3

—

—

—

X

4

X

X

—

—

5

X

—

X

—

6

X

—

—

X

7

—

X

X

—

8

—

X

—

X

9

—

—

X

X

10

X

X

X

—

11

X

X

—

X

12

X

—

X

X

13

—

X

X

X

14

X

X

X

X

15

eaton corporation New Zealand Product Guide

X = closed circuit, O = open circuit.
NO = Normally Open, NC = Normally Closed, LONC = Late Opening Normally Closed.
Four circuits in single block depth — rated 300V max.
Four-Position Joystick Operators - Contact Block Operation
Contact blocks mount directly on the back of the operator. For reliable operation, the
maximum number of contact blocks that should be installed behind each operator lever is
2 (4 contacts total). Figure 2 identifies the circuits activated by each of the eight possible
lever positions. Contact block plungers 1, 2, 3, 4 are depressed (change state) when handle
is in the position indicated by arrows in Figure 2.

Figure 2, Circuit Activation

1
2
3
4

Application Caution
Joystick operators are not recommended on certain DC applications above 24V DC which
may involve lightly engaging the contacts (teasing) to achieve speed control, positioning,
jogging, etc. Excessive arcing & deterioration of the contacts will occur.

Power Control
Control & Indication

Diecast Aluminium Enclosures

Assembled Control Stations

StandardC11

Push-Pull Stop Stations (Non-Padlockable)C11

No. of Holes

Single - Depth
T Series

Corrosion Resistant

1

TN1

E34N1

2

TN2

E34N2

3

TN3

E34N3

4

TN4

E34N4

Corrosion ResistantC11
No. of Holes

Double Depth
T Series

Corrosion Resistant

1

TN11

E34N11

2

TN12

E34N12

3

TN13

E34N13

4

TN14

E34N14

6

TN15

-

1-2 hole: 3/4 inch conduit entry hole, 2-6 hole: 1 inch conduit bottom-entry hole, 1.5 inch UNF Thread IP66.

Operator Head

Contacts

Item No.

Metal mushroom
45mm

1LONC

10250T700M

1ECNO,1LONC

10250T701M

Metal palm
63.5mm

1LONC

10250T700P

1ECNO,1LONC

10250T701P

Control & Indication

30.5mm Pushbuttons Control Stations & Enclosures

“Staylock” Push-Pull Stop Stations
(Non-Padlockable)C11
Operator Head

Contacts

Padlock Included

Item No.

Metal Mushroom
45mm

1LONC

NO

ESM9/5

1LONC

YES

ESM9/5P

1ECNO,1LONC

NO

ESM9/6

1ECNO,1LONC

YES

ESM9/6P

1LONC

NO

ESP6/5

1LONC

YES

ESP6/5P

1ECNO,1LONC

NO

ESP6/6

1ECNO,1LONC

YES

ESP6/6P

Metal Palm
63.5mm

Stainless Steel Enclosures

Stainless SteelC11
No. of Holes

316 Stainless

1

XBS130

2

XBS230

3

XBS330

Description

Item No.

4

XBS430

Fibreglass Enclosure
Start: green pushbutton with boot
Stop: red padlockable
mushroom with boot

T3500

316: 25mm non-threaded conduit bottom-entry hole, IP67. 304: 1-2 hole: 3/4 inch conduit entry hole, 2-4 hole: 1
inch conduit bottom-entry hole, 1.5 inch UNF Thread IP66.

Stop Start Pushbutton StationC11

Fibreglass Enclosures

FibreglassC11
No. of Holes

Item No.

1

TFG11

2

TFG12

3

TFG13

20mm non-threaded conduit bottom-entry hole IP66, UV Stabilised.

eaton corporation New Zealand Product Guide

267

Power Control
Control & Indication
30.5mm Pushbuttons Accessories
Padlock Attachments & Boots

Shrouds & Guards

Control & Indication

Padlock Attachment AccessoriesC11
Description

Cat. No

Title

Description

Item No.

With hinged transparent flap. For flush or extended
pushbuttons, & knob-operated selector switches

Plastic
Cover

TA38

Shroud for
Mushroom
Head
Operator

Prevents accidental operation. Not for push-pull
operators. Momentary operators only

10250TA6
E34TA6

For flush stop button. Permits locking NC contacts
in open position with padlock. Prevents operation of
button. Will not lock NO contact

Chrome

TA2

Extended
Retaining
Nut

Replaces standard nut &
provides guard for flush head pushbutton
operators.

10250TA12
E34TA12

Corrosion
Resistant

E34TA2

Guard for
Illuminated
Pushbutton

Guard for Illuminated Pushbutton

10250TA15
E34TA15*

Shroud

For jumbo mushroom head
operator. Available in Grey & Yellow (Not for pushpull operators, momentary operators only.)

TA56
10250TA56Y

Half Shroud
– Yellow

For jumbo mushroom head operator.

10250ED1241

For extended pushbutton. Permits locking NC
contacts in open position with padlock

For illuminated pushbuttons. Locks in down position
only

Chrome

Chrome

TA26

10250TA64

BootsC11
Boots

Colour

Cat. No

Protective boot for flush pushbutton operators

Clear

TA46

Black

TA47

Red

TA48

Green

TA49

Yellow

TA50

Black

TA3

Red

TA4

Green

TA10

Clear

TA85

Protective boot for illuminated pushbuttons.

Clear

TA25

Protective boot for momentary mushroom operators
on page 295. Not suitable for use with T140 operator.

Black

TA88

Protective boot for extended pushbutton operators

268

C11

Padlock Attachments

eaton corporation New Zealand Product Guide

Hardware & Kits

C11
Title

Description

Item No.

Fingerproof
Shroud

10 per Package Fits new style contact blocks &
light units.

10250TA101

Spacer Ring

Used when legend plate is not required. Set of 5

TA8

Base
Mounting
Spacers

Equivalent to contact block in depth — Complete
with screws, washers, etc. For use in pushbutton
stations for base mounting contact blocks.
1 Block Deep
2 Blocks Deep

TA22
TA23

Power Control
Control & Indication
30.5mm Pushbuttons Accessories
Special Operators & Attachments

Legend PlatesC11

Title

Description

Item No.

Description

Item No.

Wobble
Stick

Complete with retaining nut —
fits standard button.

TA5

Aluminium T-Range, large size, black unless marked “red”

TJ_ _

Custom Legends

TJ36X*

Aluminium T-Range, medium size,
black unless marked “red”

TM_ _

Custom Legends

TM36X*

Stainless steel T-Range, medium size, red, blank

TM36S

Stainless steel T-Range, medium size, black, blank

TM37S

Plastic E34 range universal size, black unless marked “red”

E34SP_ _

Maintained
Contact
Attachment

Mechanically interlocks two buttons &
provides position indication for one. Use with
two pushbutton operators & one or more
contact blocks.

TA1

*Specify text on order.
Hole Plugs & Tools

C11

Special Operators & AttachmentsC11
Title

Description

Item No.

Plug

For unused holes — Steel, painted grey

10250TA7

Stainless
Steel Plug

For unused holes — Stainless Steel - Square

E30KT5

ToolsC11
Title

Description

Item No.

Octagonal
Tool

Octagonal notched to fit over selector switch
lever

10250TA95

Tool for
Tightening
Boots

Used to install boot

TA96

Allen Key

Used for removal of jumbo mushroom head.

10250TA102

Legend

T-Range Large
Item No.

T-Range Medium
Item No.

E34 Universal
Item No.

Blank

TJ36

TM36

TSP76

Blank (red)

TJ37

TM37

TSP77

Off (red)

TJ24

TM24

E34SP24

On

TJ25

TM25

E34SP25

Run

TJ31

TM31

E34SP31

Start

TJ33

TM33

E34SP33

Stop (red)

TJ34

TM34

E34SP34

Control & Indication

Special Operators & AttachmentsC11

Special Light Modules

Special Light ModulesC11
Title

Description

Item No.

Flasher
Module

Changes any AC illuminated device to a
controlled flashing light.
24V s
120V

TFL2
TFL1

eaton corporation New Zealand Product Guide

269

Power Control
Control & Indication
30.5mm Pushbuttons, dimensions & technical data

28.7

Knob

27.7

27.7

17.5

35.1

Operator Dim. A

Lever

38.1

Knob

35.1

Lever

38.1

28.7

Lever
A

Control & Indication

Contact
Block

shbutton with
ylinder Lock

44.5

50.8 27.7

46

41.4

98.6

55.6

45.2

27.7

26.9

Flush and Long Pushbutton
Half Shroud Is Same as Long Pushbutton
with Lower Half of Guard Ring Cut Back

38.1

45.2

22.4

1.5 to 6.4

22.4

1

22.4

44.5

35.1

Pushbutton
63.5
s Long Pushbutton
uard Ring Cut Back

1.5 to 6.4
Panel Thickness
41.4

28.7
22.4
6.4
for Each
Additional
Contact Block

45.2
44.5
28.7

Push-Pull Switch

45.7

28.7

45.2

51.6

Roto-Push

36.6

21.3

51.6
35.1

40.4

27.7

17.5

Flexible Boot for
Protecting Flush or50.8
63.5
9.7
23.9
Long
Pushbutton
21.3
Illuminated
Pushbutton
41.4Catalog
No. 10250TA3
Typical
41.4
9.7

63.5

6.4

41.4

50.8
35.1

45.2

6.4
Flush Pushbutton Operator

for Flush Pushbutton
27.7 No. 50.8
Catalog
10250TA2

50.8

26.9

21.3

52.3
Padlock Attachment
for Flush
38.1Pushbutton
Catalog No. 10250TA2

Adjustable

24.6
41.1
Min.

Adjustable

63.5
Max.

41.1
Min.

38.1

Padlock Attachment
for 22.4
Extended Pushbutton
Catalog No. 10250TA26

58.7

22.4
for Each
63.5
22.6
Additional
Max.
27.2
Contact
Block
Maintained Pushbutton
Catalog No. 10250TA66 Typical

28.7

45.2

Switch

A

46

47.8

35.1

A

45.2

44.5

63.5

Jumbo Mushroom
Head Pushbutton
Operator
Press-To-Test
Indicating
– Resistor
Type
47.8 Light39.6
with Padlock Attachment

Dimension A
35.1
Dimension
A

Glass
Plastic

39.6
35.1

35.1

Approximate Dimensions in mm
A
47.8

39.6

Press-To-Test Indicating Light – Resistor Type

39.6

Press-To-Test Indicating Light – Resistor Type

Dimension A
35.1
39.6

eaton corporation New Zealand Product Guide

High

Single Depth

Double Depth

98.6

101.6

57.2

63.5

76.3

98.6

149.4

57.2

76.3

196.9

57.2

76.3

244.6

57.2

76.3

98.6

Fibreglass Enclosure Dimensions
Wide

High

1

97

100

75

2

97

150

75

3

97

200

75

35.1

47.8

Wide

Jumbo Mushroom Head Pushbutton Operator
with Padlock Attachment

Jumbo Mushroom Head Pushbutton Operator
3 with Padlock Attachment
98.6

35.1

45.2

39.6

Glass
39.6in mm
Approximate
Dimensions

sto r an d N eo n Typ e

2

44.5

Plastic
Lens
45.2

60.5

1

4

35.1

35.1

In d i cati n g Li g h t – Resi sto r an d N eo n Typ e

Lens 47.8

58.7

47.8

A
27.9
46
Press-To-Test
Light
In d
i cati n g Li g hIndicating
t – R e si st o
r a n–
d Transformer
N eo n Typ e Type

Transformer Type

60.5

63.5 44.5

Mushroom
Head Pushbutton
Operator
49.3
39.6
55.6
with Padlock Attachment

35.1

27.949.3

55.6

58.7

Diecast Aluminium Enclosure Dimensions

Press-To-Test Indicating Light – Transformer Type

Press-To-Test Indicating Light – Transformer Type

45.2
45.2

A

39.6
35.1

38.1

Indicating Light – Transformer Type

45.2

49.3

55.6

45.2

35.1

50.8

Flush Pushbutton
A
27.9 Operator
with Padlock Attachment

35.1

35.1

41.4
Min.
58.7
Max.

28.7

Main

Catalog N

23.1

Maintained Contact
Attachment
Catalog No. 10250TA17 Typica

60.5

Mushroom Head Pushbutton Operator
with Padlock Attachment

Padlock
for Knob S
Catalog N

Padlock Attachment
for Knob Selector Switch
Catalog No. 10250TA11

for Each
22.6
Additional
44.5
Approximate
Dimensions
mm
21.3
Mushroom in
Head
Pushbutton Contact
Operator
27.2
38.1
with Padlock Attachment
Block
Padlock Attachment
Maintained Pushbutton
Catalog No. 10250TA66 Typical
for Extended Pushbutton
38.1 Catalog No. 10250TA26

Flush
PushbuttonDimensions
Operator
Approximate
in mm
with
50.8
63.5 Padlock Attachment

11.2

Transparent Flexible Boot
for Illuminated 11.2
Pushbutton
Catalog No. 10250TA25

Long Pushbutton
Catalog No. 10250TA3
Typical

52.3

26.9
44.5

41.4
47.8

40.4

47.8 35.1

Mounted Flush Pushbuttons)
Catalog No. 10250TA14
35.1

33.8

33.8

47.8
40.4
Illuminated Pushbutton
Transparent Flexible Boot
28.7
Lever Operator
Flexible Boot
for
for Illuminated
Pushbutton
(For Use with Two Vertically
Protecting
Flush or
Catalog
No. 10250TA25

23.9

41.4
27.7

51.6

27.7

36.6

21°

44.5

27.9

R

35.1

35.1

47.8
Pushbutton with
Cylinder Lock

Pushbutton with with Padlock
Illuminated
Pushbutton
Attachment
Cylinder Lock
Padlock Attachment

35.1

9.7
Long
Button
Only 38.

62

31.8

101.6

28.7

95.3

28.7 48.5

63.5

28.7

48.5

Indicating Light – Transformer Type

270

35.1

35.1

19.1 45.2

45.2

45.7

47

ons in mm

38.1

27.7

44.5

28.7

66.8

45.2

45.2

27.9

38.9

Illuminated Selector
Switch

31.8

55.9
mom.
63.5
main.

40.4

Lever Operator
48.5
(For Use with Two Vertically
Mounted Flush Pushbuttons)19.1
Mushroom and
Pushbutton
with
Catalog
No. 10250TA14
27.7
27.7
17.5
Jumbo Head Pushbutton
Cylinder Lock

Push-Pull Switch

66.8

41.9

27.9

49.8

41.4

47

28.7

101.6

37.3

Cam

28.7

Jumbo Mushroom Head Pushbutton
Operator
6.4
45.2
with Padlock Attachment

5 to 6.4
anel Thickness

44.5

28.7
22.4
for Each
Additional
Contact Block
28.7

41.9

Illuminated Selector

Cam

Mushroom and95.3
Jumbo Head Pushbutton

41.9

Mushroom and
Jumbo Head Pushbutton

27.7

Key Operated
Switch
Selector Switch

55.9
mom.
63.5
main.

41.4

1.5 toThickness
6.4
Flush and LongPanel
Pushbutton
Thickness
Half Shroud Is Same asPanel
Long Pushbutton
58.7 with Lower Half of Guard
60.5 Ring Cut Back
Long
63.5 66.8
Button
38.1
Only
28.7

9.7

26.9

22.4

49.8

44.5

98.6

91.2

1.5 to 6.4
Panel Thickness
28.7

35.1

Mushroom Head Pushbutton Operator
with Padlock Attachment

27.7

22.4
for Each
Additional
Contact Block

Long
Button
Only

9.7

22.6

41.4

35.1

44.5
46

27.7

Lever
A

35.1

21°
1.5 to 6.6
54.1
47.8
30.2
95.3
1.5 to 6.4
Panel
1.5 to 6.6
54.1
22.4
47.8 Thickness
95.3 22.4
31.830.2
Panel Thickness
Per Unit
per Block
Panel Thickness
31
22.4
22.4
27.7
27.7
17.5
31.8
Per Unit
2-Position Joystick Operator
4-Po si ti o n Jo ysti ck Op er ato r
Wo b b
per Block
Catalog N
28.7
2-Position Joystick
4-Po si ti o n Jo ysti ck Op er ato r
Wo b b l e Sti ck
63.5 Operator
Catalog No. 10250TA5
38.1
55.6
91.2
37.3

Long
Button
Only

9.7

26.9

Contact
Block

52.3

52.3

Illuminated Pushbutton

63.5

22.6

35.1

35.1

Key Operated
Selector Switch

35.1

35.1

28.7

35.1

35.1

28.7

48.5

28.7

Knob

Knob

28.7

28.7

Operator Dim. A

Deep

316 Stainless Steel Enclosure Dimensions
Wide

High

Deep

1

120

120

84

2

120

160

84

3

120

220

84

4

120

280

84

9.7

29.5

19.1

9.7

25.4

82.6
82.6

55.6

55.6
48.5

41.9

Power Control
Control & Indication

31.8
23.9
Protecting Shroud for
37.3
Jumbo
23.1 Mushroom Head Button
Catalog No. 10250TA56
Padlock Attachment
Padlock Cover Guard
30.5mm Pushbuttons,
dimensions & technical
data
for Maintained
Push-Pull Operator
for Flush Pushbutton
Catalog No. 10250TA64
Catalog No. 10250TA36

41.9
Protecting Shroud for
Jumbo Mushroom Head Button
Catalog No. 10250TA56

33.3
38.9

44.5

42.9

21.3

33.3

38.1
35.1

38.1

44.5

31.8
Extended Retaining Nut
Catalog No. 10250TA12

31.8
Protecting Shroud for
Illuminated Pushbutton
Catalog No. 10250TA15

Protecting Shroud for
Mushroom Head Button
Catalog
45.2 No. 10250TA6
A

41.4

Terminals on Top
B

nting Holes

B 29
Min.
Master Test Module,
Flasher Module

7
Legend

Plate

A
Min.

45.2

41.4

15.2

B

6 Mounting Holes

Terminals at
Side

33.3

54.9

Vertical Rows

A

Dim. in mm

Small
39.6Plate
23.1 A Min.
Standard
40.4
27.2
1 or 2 Circuit Contact Blocks
Jumbo
52.3
38.9
41.4
Small or None
Square Legend Plates
44.5
Standard
Small
40.4Jumbo
Sq.
22.9 57.2
Standard
44.5Extra
Sq. Large 26.9 63.5
38.1
Jumbo
55.6 Sq.
4 Circuit Contact Block 10250T44
41.4
Extra Large 62.0 Sq.
47.8
Small or None
For plastic legend
plate,
Dimension
47.8B is
Standard
28.4
57.2
Jumbo
Extra Large
63.5

Legend Plate

Dim. in mm
A

B

1/2 Round Legend Plates

57.2
57.2
57.2
66
57.2
57.2
57.2
66

29

Master Test Module,
Flasher Module

Legend
Plate

47.8

B Min.

If Jumbo plates are to be placed one
above the other vertically, add 3.3 mm
9.7
to minimum
dimensions listed.
Hole nib hole or notch is
Note: Dia.
Locating

Small
Standard
Jumbo

19.1
Multiple Button Guard

Number of
Elements

Dimension
A

2
3
4
7

101.6
149.4
200.2
339.9

39.6
40.4
52.3

23.1
27.2
38.9

Square Legend Plates
Small
Standard
Jumbo
Extra Large

40.4 Sq.
44.5 Sq.
55.6 Sq.
62.0 Sq.

Enclosure Size
Dimensions in Inches (mm)
(No. of
Wide
High
Deep
D Elements)
A
B
C
A
C
Chain Hook Bracket

Approximate Dimensions in mm

22.9
26.9
38.1
41.4

For plastic legend plate, Dimension B is
28.4

3.45 – 3.56 mm #29 drill.
B E

A

31

Legend Plate

Panel Drilling
B and Minimum Spacing

1/2 Round Legend Plates
Legend

Extended Retaining Nut
Catalog No. 10250TA12

33.3

A
Min.

Horizontal Rows
Dim. in mm

A

B
Min.

Padlock Hasp or
Flip-Up Guard
Catalog No. TA38

Control & Indication

35.1

9.7
Dia. Hole

Mounting
D

E

B E
D
A

C

Chain Hook Bracket

eaton corporation New Zealand Product Guide

271

Power Control
Control & Indication
30.5mm Pushbuttons, dimensions & technical data

Data

onstruction
with

perator

Control & Indication

ainage

ontact
circuit and

uildup of
which
freezing

ugh paint
vide

Light Units:
•	

Features
•	 Heavy-duty zinc die cast construction
•	 Enclosed silver contacts with reliability nibs
•	 Diaphragm seals with drainage holes
•	 Grounding nibs on the operator casing

•	

 ransformers: will withstand short circuit for 1 hour per IEC 60997-5-1
T
Bulbs — average life: Transformer type 20,000 hrs., Resistor/direct
voltage type 2500 hrs. minimum @ rated V, LED 60,000 to 100,000
hrs.

Electrical Ratings:
•	

Insulation: Ui = 660V AC or DC

Life
Electrical Ratings
•	 Thermal: lth = 10A
Benefits
Pushbuttons: 10 x 10 6 operations
Short
Coordination
to IEC/EN 60947-5-1:
Insulation:
Ui
=
660VCircuit
AC or
DC
•	 Reliability nibs improve contact reliability even under dry circuit & fine
•	 Rated conditional short circuit current: 1 kA
6
Contact
blocks:
10
x
10
operations
dust conditions
Thermal: lth = 10A
•	 Fuse type: GE Power Controls TIA 10, Red Spot Type gG, 10A, 660V
PresTest
units: 10
x 10of6 liquid
operations
•	 Drainage
holes prevent
buildup
inside the operator which can
AC, 460V
Short
Circuit
Coordination
to DC, BS88-2, IEC 60269-2-1
prevent
operation
freezing
environments
Lever
and in
key
selector
switches:
IEC/EN
60947-5-1
•	 Grounding
through paint & other coatings to provide secure
6 operations
0.25 nibs
x 10bite
Rated conditional short circuit curground
Twist to release pushbuttons:
rent: 1 kA
Contact0.3
Operation
x 10 6 operations
Fuse type: GE Power Controls TIA
Slow make & break. All normally closed contacts have positive opening operation, i.e.,
•	 UL rating: A600, P600: AC load life duty cycle 1200 operations/hour
Shock
resistance
10, Red
Spot Type(–gG,
10A,
normally
closed contacts
are forced open in the event of contact weld or spring
breakage.
10A: 110V pf 0.4 – 1 x 106 operations, – 5A: 250V pf 0.4 – 1 x 106
660V AC, 460V DC,
BS88-2,
Duration:
20
mS
≥
5g
operations, – 2A: 660V pf 0.4 – 1 x 106 operations)
Standards & Certifications
IEC 60269-2-1

 witching capacity: AC15 rated make/break (11 x le at 1.1 x Ue),
S
(– 6A: 120V pf 0.3, – 4A: 240V pf 0.3, – 2A: 660V pf 0.3).
DC13 rated make/break (1.1 x le at 1.1 x Ue), (– 1.0A: 125V L/R 0.95
•	
at 300 mS, – .55A: 250V L/R 0.95 at 300 mS, – .1A: 660V L/R 0.95 at
(-17° to 66°C)
Ingress Protection (When mounted in similarly rated enclosure):
Fuse300 mS, – 10A: 110V pure resistive)
Storage
Temperature:
•	 Standard Indicating Lights: UL (NEMA) Type 1, 2, 3, 3R, 3S, 4, 4X,
•	 Maximum ratings for logic level & hostile atmosphere application:
toIP65
80°C)
UL rating: A600, P600
12,(-40°
13, IEC
Maximum amperes: 0.5A
2,000m
cycle volts: 120V AC/DC
•	 All Altitude:
Other Operators:
UL(6,562
(NEMA)ft.)
Type 1, 2, 3, 3R, 4, 4X, 12,AC
13, load life duty
Maximum
1200 operations/hour
IECHumidity:
IP65
Max. 95% RH @ 60°C
– 10A: 110V pf 0.4 – 1 x 10 6
Technical Data & Specifications
•	
•	

CE EN60947-5-1
Climate
Conditions

•	

UL 508 — File No. 131568
Operating
CSA
C22.2 No. Temperature:
14 — File No. LR68551

Terminals

operations
Marking
–
5A:
•	 Frequency of operation: All pushbuttons 6000 operations/hr, Key &250V pf 0.4 – 1 x 10 6
lever selector
3000 operations/hr,
Auto-latch devices operations
1200
NC-NOswitches
on the contact
block to meet
operations/hr.
the NEMA requirements. Dual
– 2A: 660V pf 0.4 – 1 x 10 6
•	 Life: Pushbuttons
10 x 1061operations,
Contact blocks: 10 x 106operations
marking system
– 2 for normally
operations,
PresTest
10 x 106 operations,
closed,
3 – 4 units
for normally
open to Lever & key selector
switches
0.25
x 106 operations,
Twist
to release
0.3 x capacity
Switching
meet
BS5472
(Cenelec
EN50
005) pushbuttons
106 operations,
AC15
rated make/break
Clamps
•	 Shock resistance: Duration 20 mS 5g
(11 x le at 1.1 x Ue)
Terminals are saddle clamp type
Climate Conditions:
– 6A: 120V pf 0.3
for 1 x 22 AWG (0.34 mm2) to 2 x 14
•	 Operating Temperature 2(-17° to 66°C), Storage Temperature (-40° to
AWG (2.5 mm ) conductors
4A: 240V pf 0.3
80°C), Altitude 2,000m (6,562 ft.), Humidity Max. 95% RH –
@ 60°C
Torque
=
7
lb-in
(0.8
Nm)
–
2A: 660V pf 0.3
Terminals:
Mechanical Ratings:

ormally
ve opening
ed contacts
of contact

cations

8
No. LR68551

•	

•	

rated

•	
•	

s
, 3R, 3S, 4,

 arking:
M
NC-NO
on the contact
block to meet the NEMA DC13 rated make/break
Degree
of protection
against
requirements.
Dual marking
system
1 – 2 for normally closed,
4 at 1.1 x Ue)
direct electrical
contact:
IP2X
(1.13 x– le
forwith
normally
open to meet
BS5472 (Cenelec EN50 005)
fingerproof
shroud
– 1.0A:
Clamps: Terminals are saddle clamp type for 1 x 22 AWG (0.34
mm2) 125V L/R ≥ 0.95 at 300 mS
2
to
2
x
14
AWG
(2.5
mm
)
conductors
–
.55A:
250V L/R ≥ 0.95 at 300 mS
Light Units
Torque = 7 lb-in (0.8 Nm)
–
.1A:
660V
L/R ≥ 0.95 at 300 mS
Transformers: will withstand short
Degree
of protection
against
direct
electrical contact: IP2X with
circuit
for 1 hour
per IEC
60997-5-1
– 10A: 110V pure resistive
fingerproof shroud

Bulbs — average life
Transformer type: 20,000 hrs.
Resistor/direct voltage type:
2500 hrs. minimum @ rated V
LED: 60,000 to 100,000 hrs.

Maximum ratings for logic level
and hostile atmosphere application
Maximum amperes: 0.5A
Maximum volts: 120V AC/DC

, 3R, 4, 4X,
Contact Block
Meet or Exceed NEMA Rating Designations A600, A300 and B300 for AC and P600 for DC
Descr i p ti o n

Vo l ts AC 50 o r 60 Hz
120

Make and Emerg. Interrupting Capacity (Amp)
Normal Load Break (Amp)
Thermal Current (Amp)
Voltamperes (VA):
Make and Emerg. Interrupting Capacity
Normal Load Break

switches:

272

eaton corporation New Zealand Product Guide

60
6
10

240
30
3
10

480
15
1.5
10

7200 7200 7200
720 720 720

Vo l ts DC
60
12
1.2
10
7200
720

24
5.7
5.7
5.0
138
138

125
1.1
1.1
5.0
138
138

250
0.55
0.55
5.0
138
138

SK1158GB-INT.book Seite 2 Donnerstag, 2. Oktober 2008 2:27 14

7/2

Power Control

System overview
T cam switches

Control & Indication

Cam switches

Moeller SK0211-1158GB-AUS

Isolators: T0, T3, T5B, T5

Service distribution
board mounting

Cam switches

Rear mounting

Door mounting
Control & Indication

Coupling drive
Surface mounting

Thumb-grip with front plate
Safety switch

Thumb-grip, for use as
Emergency-Stop device

Main switch (assembly kit)
Main switch (assembly kit),
for use as Emergency-Stop device
Control switches: T0, T3, T5B, T5

Service distribution
board mounting

Rear mounting

Door mounting
Coupling drive
Surface mounting

Thumb-grip with
front plate

eaton corporation New Zealand Product Guide

273

Power Control
Control & Indication
Cam switches
The reliable and robust T&P isolators are quick and easy to install and, together with simple selection, offer savings in both time and cost.
Current ratings are from 20 A to 100 A with power ratings from 4 kW to 37 kW. They are suitable for main, maintenance and
Emergency-Stop switches, being available in their own enclosures or for mounting in control cabinets, either on the door or rear
of the panel with cover interlock.
The T0 range of control switches is suitable for many different switching and control functions, such as ON/OFF, Hand/Auto
and changeover. Manufactured in the UK, this highly flexible system satisfies a wide range of applications, and can be customised
to suit specific needs.

Control & Indication

Features and benefits:
Isolators
•	 All switches to IEC/EN 60204 & IEC/EN 60947.
•	 Padlockable in the OFF position (using up to three padlocks) for safe, secure maintenance.
•	 Available in insulated enclosures to meet all applications.
•	 With a high protection standard of IP65, they can be used in most environments including the food industry.
Control switches
Sharing the same design criteria as the RMQ-Titan range, T0 switches can be combined with this system to offer even greater functionality.
•	 A broad range of mounting and fitting options speeds assembly and meets every operational requirement.
•	

On-off switches, main switches

Number of poles

M00

AC-3
415 V

Rated
uninterrupted
current, Iu

kW

A

Item No.

Flush mounting, Front
IP65,

Rear mounting, Front IP65,

Mounting form

Mounting form

Mounting forms I and I./SVB
1

2

1.3

20

T0-1-8200/...

E

Z

3.6

32

T3-1-8200/...

E

Z

7.3

63

T5B-1-8200/...

E

Z

12.3

100

T5-1-8200/...

E

Z

2.2

20

T0-1-102/...

E

Z

5.5

32

T3-1-102/...

E

Z

11

63

T5B-1-102/...

E

Z

18.5

100

T5-1-102/...

E

Z

All other mounting forms
2

3

3+N

4

274

2.2

20

T0-1-15108/...

E

Z

5.5

32

T3-1-15108/...

E

Z

22

63

T5B-1-15108/...

E

Z

18.5

100

T5-1-15108/...

E

Z

4

20

T0-2-1/...

E

Z

7.5

25

P1-25/...

E

Z

13

32

P1-32/...

E

Z

30

63

P3-63/...

E

Z

37

100

P3-100/...

E

Z

4

20

T0-2-15042/...

E

Z

11

32

T3-2-15042/...

E

Z

4

20

T0-2-8324/...

E

Z

11

32

T3-2-8324/...

E

Z

eaton corporation New Zealand Product Guide

Power Control
Control & Indication

Control & Indication

Cam switches

On-off switches, main switches

M00

Surface mounting, IP65,

Centre mounting, Front IP65,

For use as emergency-stop
devices , Surface mounting, IP65,
(totally insulated)

Mounting form

Mounting form

Mounting form

For use as emergency-stop
devices , Flush mounting, Front
IP65,

For use as emergency-stop
devices , Rear mounting, Front IP65,

Mounting form

Mounting form

I1

EZ

I1/SVB

EA/SVB

V/SVB

I2

EZ

I2/SVB

EA/SVB

V/SVB

I4

–

I4/SVB

EA/SVB

V/SVB

I5

–

I5/SVB

EA/SVB

V/SVB

I1

EZ

I1/SVB

EA/SVB

V/SVB

I2

EZ

I2/SVB

EA/SVB

V/SVB

I4

–

I4/SVB

EA/SVB

V/SVB

I5

–

I5/SVB

EA/SVB

V/SVB

I1

EZ

–

–

–

I2

EZ

–

–

–

I4

–

–

–

–

I5

–

–

–

–

I1

EZ

I1/SVB

EA/SVB

V/SVB

I2

EZ

I2/SVB

EA/SVB

V/SVB

I2

EZ

I2/SVB

EA/SVB

V/SVB

I4

–

I4/SVB

EA/SVB

V/SVB

I5

–

I5/SVB

EA/SVB

V/SVB

I1

EZ

–

–

–

I2

EZ

–

–

–

I1

EZ

–

–

–

I2

EZ

–

–

–

 To IEC/EN 60204-1, VDE 0113, Part 1 with red rotary handle and yellow locking collar, lockable in the 0 position.

eaton corporation New Zealand Product Guide

275

Power Control
Control & Indication
Cam switches
M00
Flush mounting, Front IP65,

Number of poles

AC-3, 415 V

Rated
uninterrupted
current, Iu

kW

A

1.3
3.6

Item No.

Mounting form

20

T0-1-8210/...

E

32

T3-1-8210/...

E

7.3

63

T5B-1-8210/...

E

2.2

20

T0-2-8211/...

E

5.5

32

T3-2-8211/...

E

11

63

T5B-2-8211/...

E

4

20

T0-3-8212/...

E

12

32

T3-3-8212/...

E

22

63

T5B-3-8212/...

E

30

100

T5-3-8212/...

E

37

125

T6-3-8212/...

E

55

315

T8-3-8212/...

E

4

20

T0-4-8213/...

E

12

32

T3-4-8213/...

E

22

63

T5B-4-8213/...

E

30

100

T5-4-8213/...

E

2.2

20

T0-2-8400/...

E

5.5

32

T3-2-8400/...

E

11

63

T5B-2-8400/...

E

4

20

T0-3-8401/...

E

11

32

T3-3-8401/...

E

22

63

T5B-3-8401/...

E

30

100

T5-3-8401/...

E

2.4

20

T0-3-8622/...

E

4.4

32

T3-3-8622/...

E

Changeover switches with centre off position
Mounting forms I and I./SVB

Control & Indication

1

2

All other mounting forms
3

4

Reversing switches with center off position
2

3

Reversing switches for single phase motors 240 V
2

276

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
Cam switches

Rear mounting, Front IP65,

Surface mounting, IP65,

Centre mounting, Front IP65,

Mounting form

Mounting form

Mounting form

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I5

–

–

–

–

–

–

–

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I5

–

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I1

EZ

Z

I2

EZ

Z

I4

–

Z

I5

–

Z

I1

EZ

Z

I2

EZ

eaton corporation New Zealand Product Guide

Control & Indication

M00

277

Power Control
Control & Indication
Cam switches
M00
Flush mounting, Front IP65,

Number of poles

AC-3, 415 V

Rated
uninterrupted
current, Iu

kW

A

5.5
18.5

Item No.

Mounting form

20

T0-4-8410/...

E

32

T3-4-8410/...

E

37

63

T5B-4-8410/...

E

5.5

20

T0-5-15876/...

E

18.5

32

T3-5-15876/...

E

30

63

T5B-5-15876/...

E

5.5

20

T0-6-15877/...

E

18.5

32

T3-6-15877/...

E

22

63

T5B-7-15897/...

E

4

20

T0-3-8451/...

E

12

32

T3-3-8451/...

E

22

63

T5B-3-8451/...

E

4

20

T0-4-8440/...

E

12

32

T3-4-8440/...

E

22

63

T5B-4-8440/...

E

4

20

T0-5-8453/...

E

12

32

T3-5-8453/...

E

22

63

T5B-6-71/...

E

4

20

T0-6-15866/...

E

12

32

T3-6-15866/...

E

Star-delta switches
Mounting forms I and I./SVB

Control & Indication

3

Reversing star-delta switches
3

3 with interlock
provision

Multi-speed switches
Two-speed, non-reversing, all other mounting forms
3, for two separate
windings

3, for one-tapped
winding

Reversing multi-speed switches
Two-speed, reversing
3

3

278

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
Cam switches

Rear mounting, Front IP65,

Surface mounting, IP65,

Centre mounting, Front IP65,

Mounting form

Mounting form

Mounting form

Z

I1

EZ

Z

I2

EZ

Z

I4

-

Z

-

EZ

Z

I2

EZ

Z

-

-

Z

-

EZ

Z

-

EZ

Z

-

-

Z

I1

EZ

Z

I2

EZ

Z

I4

-

Z

I1

EZ

Z

I2

EZ

Z

I4

-

Z

-

EZ

Z

-

EZ

Z

-

-

Z

-

EZ

Z

-

EZ

eaton corporation New Zealand Product Guide

Control & Indication

M00

279

Power Control
Control & Indication
Cam switches
M00
Flush mounting, Front
IP65,

Number of poles

Steps

AC-3, 415 V

Rated
uninterrupted
current, Iu

kW

A

4
5.5

Item No.

Mounting form

20

T0-2-15121/...

E

32

T3-2-15121/...

E

22

63

T5B-2-15121/...

E

4

20

T0-3-8426/...

E

5.5

32

T3-3-8426/...

E

22

63

T5B-3-8426/...

E

-

-

T0-1-8240/...

E
E

Starting switches
For single phase motor with auxiliary winding

Control & Indication

Mounting forms I and I./SVB
2, non-reversing

-

2, reversing

Step switches
All other mounting forms
1

280

2

1

3

T0-2-8241/...

1

4

T0-2-8242/...

E

1

5

T0-3-8243/...

E

1

6

T0-3-8244/...

E

1

7

T0-4-8245/...

E

1

8

T0-4-8246/...

E

1

9

T0-5-8247/...

E

3

2

T0-3-8280/...

E

3

3

T0-5-8281/...

E

3

4

T0-6-8282/...

E

3

5

T0-8-8283/...

E

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
Cam switches

Rear mounting, Front IP65,

Surface mounting, IP65,

Centre mounting, Front IP65,

Mounting form

Mounting form

Mounting form

Z

I1

EZ

Z

I2

EZ

Z

I4

-

Z

I1

EZ

Z

I2

EZ

Z

I4

-

Z

I1

EZ

Z

I1

EZ

Z

I1

EZ

Z

I1

EZ

Z

I1

EZ

Z

I1

EZ

Z

I1

EZ

Z

-

EZ

Z

I1

EZ

Z

-

EZ

Z

-

EZ

Z

-

EZ

eaton corporation New Zealand Product Guide

Control & Indication

M00

281

Power Control
Control & Indication
Cam switches
M00
Flush mounting, Front
IP65,

Number of poles

Item No.

Stock Code

Mounting form

Instrument selector switches
Voltmeter

Control & Indication

Mounting forms I and II./SVB
3 x phase against phase with OFF position

T0-2-15920/...

Q

E

3 x phase against phase without OFF position

T0-2-15922/...

Q

E

3 x phase against neutral with OFF position

T0-2-15921/...

Q

E

3 x phase against neutral without OFF position

T0-2-15923/...

Q

E

3 x phase against phase plus 3 x phase against neutral with OFF position

T0-3-8007/..

Q

E

3 x phase against phase plus 3 x phase against neutral without OFF position

T0-3-15924/...

Q

E

3-pole, measurement via current transformers

T0-3-8048/...

Q

E

3-pole, direct measurement
3 main circuits, 12 A

T0-5-15925/...

Q

E

3-pole, direct measurement
3 main circuits, 25 A

T3-5-15925/...

Q

E

3-pole, direct measurement
3 main circuits, 63 A

T5B-6-183/...

Q

E

Ammeter
All other mounting forms

AccessoriesM00
Description

For use with

Item No.

Front protected to IP 53

T0, T3 and P1-.../E, .../I..., .../Z

S-T0

Red handle, yellow locking collar

T0, T3 and P1-.../E, .../I..., .../Z

SVB-T0

T5(B) and P3-.../E, .../I..., .../Z

SVB-P3

Key operation

Padlockable handle

282

eaton corporation New Zealand Product Guide

Power Control
Control & Indication
Cam switches

Rear mounting, Front IP65,

Surface mounting, IP65,

Centre mounting, Front IP65,

Mounting form

Mounting form

Mounting form

Z

I1

EZ

Z

I1

EZ

Z

I1

-

Z

I1

EZ

Z

I1

EZ

Z

I1

-

Z

I1

EZ

Z

-

EZ

Z

-

EZ

Z

-

-

Control & Indication

M00

AccessoriesM00
Description

For use with

Item No.

Early-make, late-break, side mounting. Can be fitted to left and/or right of 3-pole. P switchdisconnectors

P1-.../E, .../EA, .../EZ

N-P1E

P1-.../Z, .../V, .../I2

N-P1Z

P3-.../E, .../EA

N-P3E

P3-.../Z, .../V, .../I...

N-P3Z

P1-.../E, .../EA, .../EZ
P3-.../E, .../EA

HI11-P1/P3E

P1-.../Z, .../V, .../I2

HI11-P1/P3Z

Neutral poles

Auxiliary contacts
1 N/O, 1 N/C. Can be fitted to left and/or right of 3-pole. P switch-disconnectors

P3-.../I, .../Z, .../V, .../I...

eaton corporation New Zealand Product Guide

283

Power Control
Control & Indication
Cam switches
AccessoriesM00
Description

For use with

Item No.

Black-handle

T0, T3-.../E, .../EZ, .../IVS, ..../Z, .../I1

KNB-T0

Includes hollow drive shaft tube plus black KNB
handle

P1, when door is open

KNK-T0

P3, when door is open

KNK-P3

T0 and T3

DE-T0

T5B and P3

DE-P3

37 mm overall length

P1-.../EA

AE-T0

37 mm overall length

P3-.../EA

AE-P3

T0, T3 and P1-.../E, .../EZ

UV-T0

T5(B) and P3-.../E

UV-P3

UV-T0

ZVV-T0

UV-P3

ZVV-P3

T0, T3 and P1-.../Z

ZAV-T0

T5(B) and P3-.../Z

ZAV-P3

For flush mounting switches, up to four contact
units 	

T0-..., T3-... and P1-.../E

H3-T0

-

T0, up to 2 contact units

CI-K1-T0-2

T0, up to 4 contact units

CI-K1-T0-4

T3, P1 up to 2 contact units

CI-K2-T3-2

T3, up to 5 contact units

CI-K2-T3-5

T5B, P3 up to 2 contact units

CI-K4-T5B-2

T5B, up to 4 contact units

CI-K4-T5B-4

T5, P3 up to 2 contact units

CI-K5-T5-2

T5, up to 4 contact units

CI-K5-T5-4

Thumb-grips

Control & Indication

Serviceman’s key

Coupling drive
-

Drive shaft

Interlocks with N and PE terminals

Interlock extensions
Push-fit, up to 4 units, 25 mm

Shaft extensions
Plug-in, 25 mm

Sleeves

Insulated enclosures

284

eaton corporation New Zealand Product Guide

Multi-Voltage, Hardwired Power Conditioners for Industrial Applications

Pushbutton Dimensions

Take Control
22.5mm Modular Pushbuttons

Rugged & Reliable
Eaton/Moeller’s M22 Titan 22.5mm industrial heavy-duty
pushbutton line offers a wide array of functional, attractive
& ergonomically designed illuminated & non-illuminated
pushbuttons, selector switches, push-pulls, alternate action
& twist-to-release operators.

The complete illuminated line is only offered in LED light units
to ensure high-quality brightness & up to 100,000 hours of LED
illumination. The space-saving modular construction of the
22.5mm line makes on-the-job assembly fast & simplifies the
stocking of both components & complete devices.

For further Information:

1300 332 866

www.eaton.co.nz

Power Control

Automation & Control

Automation & Control

Control, Monitor,
Protect.

•	

286

eaton corporation New Zealand Product Guide

Today’s marketplace is all about
how you interface with customers,
suppliers & your machinery. Meeting
customers’ needs means creating
products that interface seamlessly.
That’s why Eaton’s complete line
of automation & control products
includes everything from sophisticated
logic controllers & operator interfaces
to monitoring relays, timers, limit
switches & terminal blocks, all the
latest in technology.

•	

With the ever present need to be
connected to your machinery &
processes, communications are
more important than ever. All our
controllers, touchscreens & drives
provide Ethernet connectivity to
stay in control of your processes
& machinery wherever you are.
Our new & expanded range, now
including Moeller’s industrial
automation products, provides a
one-stop shop for all your automation
& control requirements.

3/2

Power Control

System overview
easy relays, MFD-Titan multi-function display

Automation & Control
Moeller SK0211-1158GB-AUS

Easy Relay controllers

2

2
1

3

Automation & Control

Control relays, displays
Compact and modular PLC

System overview, easy relays, MFD-Titan multi-function display (See legend overleaf).

5

4

4

6

6

5

C

ES

C

ES

7

8

9

10

T
AL

L

DE

OK

11

POW

12

ERR

13

MS

POWER
BUS

NS

COM-ERR

ADR

8

System overview
1.	
2.	
3.	
4.	
5.	
6.	
7.	

Separately mounted display MFD(-AC)-CP4-500
Ethernet gateway EASY209-SE
Separately mounted display MFD(-AC)-CP4-800
Base units EASY500
Base units EASY700
Base units EASY800
Output expansion EASY202-RE

8.	 Input/output expansion EASY6...
9.	 Coupling unit EASY200-EASY
10.	 Bus modules EASY204-DP
11.	 Bus modules EASY205-ASI
12.	 Bus modules EASY221-CO
13.	 Bus modules EASY222-DN

eaton corporation New Zealand Product Guide

287

Power Control
Automation & Control
Easy Relay controllers
System overview, easy relays, MFD-Titan multi-function display

Automation & Control

Specifications (refer previous page)
1.	Separately mounted display: MFD(-AC)-CP4-500,
24 V DC, 100/240 V AC, serial interface, cage clamp terminals, programming port connection to easy500/
easy700 as display repeater with MFD-80-… (ASCII characters), CP8-… as display extension with MFD,
with integral extension cable (5m, can be cut to length)
2.	Ethernet gateway: EASY209-SE,
24 V DC, serial interface, protocols (ARP, Auto-IP, DHCP, HTTP, ICMP, SNMP, TCP, Telnet, TFTP, UDP)
3.	 Separately mounted display: MFD(-AC)-CP4-800, 24 V DC, 100/240 V AC,
serial interface, cage clamp terminals, terminal connection to easy800/MFD-…, 80… (ASCII characters).
With integral extension cable (5m, can be cut to length)
4. 	Base unit: easy500,
stand alone, inputs/outputs & bus systems easy-NET on board, DA: 12 V DC, DC: 24 V DC, AB: 24 V AC,
AC: 100/240 V AC, 50/60 Hz, 8 digital inputs, 2 usable as analogue inputs (all AB, DA or DC versions),
4 relay outputs (max. 10 A) or 4 transistor outputs, LCD display, X versions without LCD, bolt-on & top-hat
rail mounting, screw terminals
5. 	Base unit: easy700,
expandable: Inputs/outputs & bus systems, DA: 12 V DC, DC: 24 V DC, AB: 24 V AC, 12 digital inputs, 4
usable as analogue inputs (all AB, DA & DC versions), 6 relay outputs (max. 10 A) or 8 transistor outputs,
LCD display, X versions without LCD, bolt-on & top-hat rail mounting, screw terminals

6. 	Base unit: easy 800,
expandable: Inputs/outputs & bus systems, DC: 24 V DC, AC: 100/240 V AC, 50/60 Hz, AC: 100/240 V AC,
50/60 Hz, 12 digital inputs, 4 usable as analogue inputs (all DC versions), 6 relay outputs (max. 10 A) or
8 transistor outputs, 1 analogue output (optional on DC versions), LCD display, X versions without LCD,
bolt-on & top-hat rail mounting, screw terminals
7. 	Output expansion: EASY202-RE, 2 relay outputs (max. 10 A), bolt-on & top-hat rail mounting, screw
terminals
8. 	Input/output expansion: EASY6…,
24 V DC, 100/240 V AC, 50/60 Hz, 12 digital inputs, 6 relay outputs (max. 10 A) or 8 transistor outputs,
bolt-on & top-hat rail mounting, screw terminals
9 	Coupling unit: EASY200-EASY, for remote connection of an easy6... I/O expansion via 2-pole connection
cable (max. 30 m) e.g. NYM 3 x 1.5 mm²
10. 	Bus module: EASY204-DP,
Profibus DP connection as slave
11. 	Bus module: EASY205-ASI,
AS-Interface connection as slave
12. 	Bus modules: EASY221-CO,
CANopen interface
13. 	Bus modules: EASY222-DN,
DeviceNet interface

Base units easy500, easy700, easy800
Inputs

easy500

easy700
Expandable: Inputs/outputs
and bus systems

easy800
Expandable: Inputs/outputs
and bus systems

288

M02
Additional
features

Outputs

Digital

of which can
be used as
analogue

Relay 10 A (UL)

Transistor

Analog

Display and
keypad

Real time
clock

8

2

4

–

– 





Supply voltage

Item No.

24 V AC

EASY512-AB-RC

8

2

4

–

– 

–



24 V AC

EASY512-AB-RCX

8

–

4

–

– 



–

100/240 V AC

EASY512-AC-R

8

–

4

–

– 





100/240 V AC

EASY512-AC-RC

8

–

4

–

– 

–



100/240 V AC

EASY512-AC-RCX

8

2

4

–

– 





12 V DC

EASY512-DA-RC

8

2

4

–

– 

–



12 V DC

EASY512-DA-RCX

8

2

4

–

– 



–

24 V DC

EASY512-DC-R

8

2

4

–

– 





24 V DC

EASY512-DC-RC

8

2

4

–

– 

–



24 V DC

EASY512-DC-RCX

8

2

–

4

– 





24 V DC

EASY512-DC-TC

8

2

–

4

– 

–



24 V DC

EASY512-DC-TCX

12

4

6

–

–





24 V AC

EASY719-AB-RC

12

4

6

–

–

–



24 V AC

EASY719-AB-RCX

12

–

6

–

–





100/240 V AC

EASY719-AC-RC

12

–

6

–

–

–



100/240 V AC

EASY719-AC-RCX

12

4

6

–

–





12 V DC

EASY719-DA-RC

12

4

6

–

–

–



12 V DC

EASY719-DA-RCX

12

4

6

–

–





24 V DC

EASY719-DC-RC

12

4

6

–

–

–



24 V DC

EASY719-DC-RCX

12

4

–

8

–





24 V DC

EASY721-DC-TC

12

4

–

8

–

–



24 V DC

EASY721-DC-TCX

12

–

6

–

–





100/240 V AC

EASY819-AC-RC

12

–

6

–

–

–



100/240 V AC

EASY819-AC-RCX

12

4

6

–

–





24 V DC

EASY819-DC-RC

12

4

6

–

–

–



24 V DC

EASY819-DC-RCX

12

4

6

–

1





24 V DC

EASY820-DC-RC

12

4

6

–

1

–



24 V DC

EASY820-DC-RCX

12

4

–

8

–





24 V DC

EASY821-DC-TC

12

4

–

8

–

–



24 V DC

EASY821-DC-TCX

12

4

–

8

1





24 V DC

EASY822-DC-TC

12

4

–

8

1

–



24 V DC

EASY822-DC-TCX

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
Easy Relay controllers
MFD-Titan display/keypad, CPU, I/O modules
Voltage

M03

Description

Item No.

–

With keypad & Moeller logotype NEMA 4x in connection with MFD-XM-80 protective membrane,
see accessories

MFD-80-B

–

With keypad, without Moeller logotype, NEMA 4x in connection with MFD-XM-80 protective membrane,
see accessories

MFD-80-B-X

–

Without keypad, with Moeller logotype, NEMA 4x

MFD-80

–

Without keypad, without Moeller logotype, NEMA 4x

MFD-80-X

Power supply unit/CPU module
Expandable with MFD-80-.. & I/O module, easy expansions can be connected, Serial interface, IP20, cage clamp terminals
100/240 V AC

Without easy-NET

MFD-AC-CP8-ME

100/240 V AC

With easy-NET

MFD-AC-CP8-NT

24 V DC

Without easy-NET

MFD-CP8-ME

24 V DC

With easy-NET

MFD-CP8-NT

MFD-Titan display/keypad, CPU, I/O modules

M03

Inputs
Digital

Range of
temperature

Outputs
of which can be
used as analog

Automation & Control

Display/operating unit
Graphics display: 132 x 64 pixels with switchable backlight, freely definable status LED, IP65, removable titanium
front frame

Pt 100/
Ni 1000

Relay
10 A (UL)

Transistor

Item No.

Analog

I/O modules
IP20, cage clamp terminals 24 V DC for MFD-CP8..

	

100/240 V AC for MFD-AC-CP8…

12

4

–

4

–

–

–

MFD-R16

12

4

–

–

4

–

–

MFD-T16

12

4

–

4

–

1

–

MFD-RA17

12

4

–

–

4

1

–

MFD-TA17

12

–

–

4

–

–

–

MFD-AC-R16

I/O modules with temperature measuring
IP20, cage clamp terminals, 24 V DC for MFD-CP8…, (from device version 08), temperature range can be set
6

2

2

–

4

–

-40…+90 °C
0…+250 °C
0…+400 °C

MFD-TP12-PT-A

6

2

2

–

4

–

-200…+200 °C
0…+850 °C

MFD-TP12-PT-B

6

2

2

–

4

–

-40…+90 °C
0…+250 °C

MFD-TP12-NI-A

6

2

2

–

4

1

-40…+90 °C
0…+250 °C
0…+400 °C

MFD-TAP13-PT-A

6

2

2

–

4

1

-200…+200 °C
0…+850 °C

MFD-TAP13-PT-B

6

2

2

–

4

1

-40…+90 °C
0…+250 °C

MFD-TAP13-NI-A

eaton corporation New Zealand Product Guide

289

Power Control
Automation & Control
Easy Relay controllers
Expansions, bus modules, Ethernet gateway
Description

M02
Supply
voltage

Inputs

Outputs

Digital

Relay 10 A
(UL)

Transistor

For use with

Item No.

–

12

6

–

100/240 V AC

easy700
easy800
MFD-CP8..

EASY618-AC-RE

–

12

6

–

24 V DC

–

12

–

8

24 V DC

EASY620-DC-TE

Not usable in combination with base units EASY719-DA-...

–

2

–

–

EASY202-RE

For the connection of remote I/O modules up to 30 m.

–

–

–

–

easy700
easy800
MFD-CP8..

EASY200-EASY

AS-Interface connection slave 4 inputs, 4 outputs, 4parameter
bits Addresses available: 0 to 31

–

–

–

–

EASY205-ASI

Profibus DP slave addresses available: 1 to 126

–

–

–

–

easy700
easy800
MFD-CP8..

CANopen interface addresses available: 1 to 127

–

–

–

–

EASY221-CO

DeviceNet interface addresses available: 0 to 63

–

–

–

–

EASY222-DN

Serial interface easy to ethernet

–

–

–

–

easy500
easy700
easy800
MFD-CP8..

EASY209-SE

24 V DC

–

–

–

–

easy500
easy700

MFD-CP4-500 

24 V DC

–

–

–

–

easy800
MFD-CP8..

MFD-CP4-800 

100/240 V AC

–

–

–

–

easy500
easy700

MFD-AC-CP4-500 

100/240 V AC

–

–

–

–

easy800
MFD-CP8..

MFD-AC-CP4-800 

Automation & Control

I/O expansions

EASY618-DC-RE

Coupling unit

Expansion units for networking

EASY204-DP

Ethernet gateway

Power supply unit/communication modules

 Discount code M03.

290

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
Easy Relay controllers
Easy relays, MFD-Titan multi-function display, accessories

M02

Description

For use with

Item No.

Menu selection in 13 languages. Operating systems: Windows 2000 SP4, Windows XP SP1

easy400/500/600/700

EASY-SOFT-BASIC

Menu selection in 13 languages. Operating systems: Windows 2000 SP4, Windows XP SP1

easy400/500/600/700/ 800/
MFD-..-CP8

EASY-SOFT-PRO

SUB-D 9-pole, serial, 2 m

easy500
easy700

EASY-PC-CAB

SUB-D 9-pole, serial, 2 m

easy800
MFD-..-CP8

EASY800-PC-CAB

32 kB module

easy500
easy700

EASY-M-32K

256 kB module

easy800
MFD-..-CP8

EASY-M-256K

Spare link between base unit & expansion units

easy700/800/
MFD-..-CP8

EASY-LINK-DS

easy800
MFD-..-CP8-NT

EASY-NT-30

Programming software

Memory cards

Automation & Control

Programming cable

Coupling piece

Network connection cable (remote coupling)
Completely prepared for easy-NET
Length: 0.3 m
Length: 0.8 m
Length: 1.5 m

EASY-NT-80
EASY-NT-150

Point-to-point connection cable
Serial interface for connecting MFD-..-CP8 to easy800 or MFD-..-CP8, can be configured as required with
separate plug, 5m can be cut as required

easy800
MFD-..-CP8

MFD-800-CAB5 

easy800
MFD-..-CP8
EASY800-PC-CAB

ZB4-03B-AD1 

24 V DC, IP20

MFD-80..

MFD-CP4 

100/240 V AC, IP20

MFD-80..

MFD-AC-CP4 

For the connection of MFD-CP4-500 to easy500/easy700, 5m, can be cut to length

easy500
easy700

MFD-CP4-500CAB5 

For the connection of MFD-CP4-800 to easy800/MFD-…-CP8, 5m, can be cut to length

easy800
MFD-..-CP8

MFD-CP4-800CAB5 

Adapter for the connection between easy800 & MI4
Connection of MI4 operator panel to easy800 or MFD-..-CP8 in conjunction with programming cable EASY800PC-CAB

Reserve power supply/communications module
For MFD-80… separately mounted display (only ASCII characters) on easy500/700/800/MFD-…-CP8, without connection cable, serial interface.

Spare connection cables

 Discount code M03.

eaton corporation New Zealand Product Guide

291

Power Control
Automation & Control
Easy Relay controllers
Easy relays, MFD-Titan multi-function display, accessories

M02

Description

For use with

Item No.

Rated input voltage: 50/60 HZ: 100/240 V AC
Rated output voltage (residual ripple): 24 V DC (g 3 %)
Rated output current: 1.25 A

easy500
easy700
easy800
MFD-CP8

EASY400-POW

Rated input voltage: 50/60 Hz: 100/240 V
Rated output voltage: 24 V/12 V DC
Rated output current: 0.35 A/20 mA

easy500
easy700
easy800
MFD-CP8

EASY200-POW

6 channels, cable length up to 100m

AC versions of easy/MFD

EASY256-HCI

12 mm x 66 mm x 82 mm Installation on hinged inspection window, for front fitting of
devices. Complete set, consisting of 2 brackets & 4 screws

easy200
easy500
easy700
easy800
MFD-CP8

SKF-HA

Automation & Control

Switched-mode power supply unit
Primary-switched mode, stabilized

Upstream device
To increase the AC input current

Mounting accessories
Top-hat rail adapter for hinged inspection window

Hinged inspection window
94 mm x 77 mm x 25 mm (4 space units)

easy500

SKF-FF4

130 mm x 77 mm x 25 mm (6 space units)

easy700
easy800

SKF-FF6

Mounting rail with cutout specifically for MFD-AC-CP8.../MFD CP8... for fixing easy
expansion units (2 space units) Length: 142.5 mm

easy200

MFD-TS-144 

Transparent, protection against accidental actuation. Can be sealed. Application
without front frame

MFD-80..

MFD-XS-80 

Transparent version for harsh environmental conditions & application in the food
industry. Increased protection rating to NEMA 4x for MFD-80-B

MFD-80..

MFD-XM-80 

Gold frame for MFD-80…

–

MFD-FR-80-AU 

Mounting rail to IEC/EN 60715

Protective cover

Protective membrane

Front frame

 Discount code M03.

292

eaton corporation New Zealand Product Guide

F14

F15

0

1

2

3

ESC

CLEAR

ENTER

Power Control
Automation & Control
2

XC100/200 Programmable logic controllers

0 1 2
3
4 5 6
0 1 2 7
3
4 5 14
15

0 1 2
3
4 5 6
8 9 10 7
11
12 13 14
15

XC-CPU101

DC INPU
T

3

0 1 2
3
4 5 6
8 9 10 7
11
12 13 14
15

EH-XD16

DC INPU
T

0 1 2
3
4 5 6
8 9 10 7
11
12 13 14
15

EH-XD16

DC INPU
T

EH-XD16

6

4

7

0 1 2
3
4 5 6
0 1 2 7
3
4 5 14
15
XC-CPU201

Automation & Control

5

2

3
0 1 2
3
4 5 6
8 9 10 7
11
12 13 14
15

DC INPU
T

EH-XD16

0 1 2
3
4 5 6
8 9 10 7
11
12 13 14
15

DC INPU
T

EH-XD16

0 1 2
3
4 5 6
0 1 2 7
3
4 5 14
15
XC-CPU101

System overview

8

2.	XC100
3.	 XI/OC I/O modules
4.	Battery
5.	 Memory card (multimedia card)
6.	XC200
7.	 Module rack
8.	 XI/OC terminal block

8

XC-CPU…M03
Description

Std. Pack

Item No.

XC100/XC200
• Controller with digital inputs/outputs, locally & remotely expandable
• CANopen interface, 24V power supply
• Locally expandable by up to 15 XI/OC modules
• The following accessory equipment is required: terminal clamps, module rack, battery
XC100
Controller with 8 digital inputs (4 interrupt inputs), 6 digital outputs, RS232 interface for programming & communication, CANopen interface; slot for memory card,
optional expansion with text display, RUN/STOP switch & LED indicators.
64 kByte user memory

1 off

XC-CPU101-C64K-8DI-6DO

128 kByte user memory

XC-CPU101-C128K-8DI-6DO

256 kByte user memory

XC-CPU101-C256K-8DI-6DO

XC200
Controller with 8 digital inputs (2 counters, 2 interrupt inputs, 1 incremental input) & 6 digital outputs, Ethernet & RS232 interface for programming & communication,
CANopen interface, slot for memory card, USB interface, RUN/STOP switch & LED indicators.
256 kByte user memory

1 off

XC-CPU201-EC256K-8DI-6DO

512 kByte user memory

XC-CPU201-EC512K-8DI-6DO

256 kByte user memory
Integrated Web server

XC-CPU201-EC256K-8DI-6DO-XV

512 kByte user memory
built-in Web server

XC-CPU201-EC512K-8DI-6DO-XV

eaton corporation New Zealand Product Guide

293

Power Control
Automation & Control
XC100/200 Programmable logic controllers
XIOC-…M03
Description

Std. Pack

Item No.

1 off

XIOC-8DI

XI/OC
• Compact I/O system for connection to XC100/200 Modular PLCs
• XC100/200 expandable with up to 15 XI/OC modules
• Optionally, screw terminals or spring-loaded terminals for digital/analogue modules

Automation & Control

Digital modules
-

8 inputs, 24 V DC

-

16 inputs, 24 V DC

XIOC-16DI

-

16 inputs, 240 V AC

XIOC-16DI-AC

-

32 inputs, 24 V DC

XIOC-32DI

-

8 outputs, 24 V DC, 0.3 A

XIOC-8DO

-

12 relay outputs

XIOC-12DO-R

-

16 outputs, 24 V DC, 0.3 A XIOC-16DO

XIOC-16DO

-

16 outputs, 24 V DC, 0.8 A, short-circuit proof

XIOC-16DO-S

-

32 outputs, 24 V DC, 0.2 A

XIOC-32DO

-

16 connections, 4 inputs, 12 freely parameterisable as
inputs/outputs, 24 V DC Outputs 0.5 A

XIOC-16DX

Inputs

8 inputs, 4 – 20 mA

Analogue modules

Outputs

Combination
modules

1 off

XIOC-8AI-I2

8 voltage inputs, 0 – 10 V

XIOC-8AI-U1

8 voltage inputs, g10 V

XIOC-8AI-U2

4 inputs for temperature monitoring, Pt100/1000

XIOC-4T-PT

4 inputs for thermocouples, Type K, J, L, B, N, E, R, S, T

XIOC-4AI-T

2 outputs, g10 V

XIOC-2AO-U2

2 outputs, 0 – 10 V, 2 outputs, 4 – 20 mA

XIOC-2AO-U1-2AO-I2

4 outputs, 0 – 10 V

XIOC-4AO-U1

2 inputs & 1 output, 0 – 10 V
1 ms conversion time

XIOC-2AI-1AO-U1

2 inputs & 1 output, 0 – 10 V, 0 – 20 mA
1 ms conversion time, individual changeover

XIOC-2AI-1AO-U1-I1

4 inputs & 2 outputs, 0 – 10 V
1 ms conversion time

XIOC-4AI-2AO-U1

4 inputs & 2 outputs 0 – 10 V, 0 – 20 mA
1 ms conversion time, individual changeover

XIOC-4AI-2AO-U1-I1

Counter modules

294

-

1 input up to 100 kHz, 24 V DC, 5 V DC, 2 digital
transistor outputs, opto-isolated, 24 V DC
30-pole connector required for counter module

-

2 inputs up to 100 kHz, (24 V DC or 5 V diff), 4 digital
transistor outputs, opto-coupled, 24 V DC
30-pole connector required for counter module

XIOC-2CNT-100KHZ

-

2 incremental encoders up to 400 kHz, 5 V DC,
2 analog, outputs, +10 V

XIOC-2CNT-2AO-INC

eaton corporation New Zealand Product Guide

1 off

XIOC-1CNT-100KHZ

Power Control
Automation & Control
Easy Control relays & accessories
EC4P-…M02
Inputs
Digital

Outputs
of which can be
used as analog

Relay 10 A (UL)

Transistor

Additional features,
Display & keypad

Supply voltage

Std. Pack



24 V DC

1 off

Item No.

Analog

easy Control

12

4

-

8

-

12

4

-

8

-

12

4

6

-

-

12

4

6

-

-

12

4

-

8

1

12

4

-

8

1

12

4

6

-

1

12

4

6

-

1

EC4P-221-MTXD1
EC4P-221-MTXX1
EC4P-221-MRXD1



EC4P-221-MRXX1
EC4P-221-MTAD1



EC4P-221-MTAX1
EC4P-221-MRAD1



Automation & Control

easy-NET/CANopen on board

EC4P-221-MRAX1

easy-NET/CANopen & Ethernet on board
12

4

-

8

-

12

4

-

8

-

12

4

6

-

-

12

4

6

-

-

12

4

-

8

1

12

4

-

8

1

12

4

6

-

1

12

4

6

-

1

Accessories 	
1 Power supply unit/communication module 	
2 Display/keypad 	
3 Programming software 	
4 PC programming cable 	
5 Switched-mode power supply unit 	
6 Memory card 	
7 I/O expansion 	
8 output expansion, bus module, coupling module 	



24 V DC

1 off

EC4P-222-MTXD1
EC4P-222-MTXX1
EC4P-222-MRXD1



EC4P-222-MRXX1
EC4P-222-MTAD1



EC4P-222-MTAX1
EC4P-222-MRAD1



EC4P-222-MRAX1

See page 	
327	
327	
329	
329	
330	
329	
328	
328	

Accessories XIOC-…

M03

Description

Std. Pack

Item No.

1 off

XIOC-NET-DP-M

Communication modules
-

Profibus DP master module

-

Profibus DP slave module

XIOC-NET-DP-S

-

Suconet K master module

XIOC-NET-SK-M

-

Serial interface RS 232C, RS 485, RS 422. Operating modes: Transparent mode,
Modbus master, slave, SUCOM A, Suconet-K slave

XIOC-SER

Accessories
Terminals
One 18-pole terminal plug is required for each digital & analogue module.
-

18-pole plug with spring-loaded terminal

-

18-pole plug with screw terminal

10 off

XIOC-TERM-18S

-

30-pole connector for counter module, with 4 m cable
XIOC-1CNT-100KHZ, XIOC-2CNT-100KHZ

XIOC-TERM30-CNT4

-

40-pole connector for digital module, with 4 m cable
XIOC-32DI, XIOC-32DO

XIOC-TERM32

Basic rack for mounting XC100/200
on top-hat rail, expandable

Width: 2 slots for controller

Basic rack for mounting XC100/200
on top-hat rail, expandable

Width: 3 slots for controller & one XI/OC
module

XIOC-BP-XC1

Expander rack for mounting XI/OC
modules on top-hat rail, expandable

Width: 2 slots for XI/OC modules

XIOC-BP-2

Expander rack for mounting XI/OC
modules on top-hat rail, expandable

Width: 3 slots for XI/OC modules

XIOC-BP-3

Expander rack for mounting XI/OC
modules on top-hat rail, expandable

Width: 3 slots for XI/OC modules
Note: module carriers for expansion to maximum 15 modules must be plugged into
the 5th slot (see also: XI/OC project engineering)

XIOC-BP-EXT

XIOC-TERM-18T

Racks
1 off

XIOC-BP-XC

eaton corporation New Zealand Product Guide

295

Power Control
Automation & Control
Easy Control relays & accessories
Accessories XIOC-…, XTT…

M03

Description

Item No.

Multi-media card
For storage of programs, data, recipes
-

32 MByte

XT-MEM-MM32M

-

For back-up of real-time clock & retentive data

XT-CPU-BAT1

Battery

Automation & Control

Programming cable RS232
2 m length

XT-SUB-D/RJ45

2 m length

Ethernet cross, 2 m

XT-CAT5-X-2

5 m length

Ethernet cross, 5 m

XT-CAT5-X-5

Connecting cable for interface switch XC200

Length: 0.3 m

EASY-NT-30*

Connecting cable for interface switch XC200

Length: 0.8 m

EASY-NT-80*

Connecting cable for interface switch XC200

Length: 1.5 m

EASY-NT-150*

-

Recommendation: UNITRONIC bus LD, Messrs. LAPPKABEL, 2 x 2 x 0.22 mm2
Surge impedance: 100 – 120 W
Effective capacitance: 800 Hz, max. 60 nF/km

-

-

Empty module to cover free XI/OC slots

XIOC-NOP

-

Interface adapter to split the combined
RS232/Ethernet interface of the XC200 into RJ45 sockets.
Connection cable EASY-NT-30/80/150 usable for connection to XC200.

XT-RJ45-ETH-RS232

-

Interference suppression of the external 24 V DC, supply of the XC100/200,
Max. current drawn: 2.2 A

XT-FIL-1

-

Insert labels for free user inscription
For 3 devices: XV-101-K42
For 3 devices: XV-101-K84

XT-BS1

Menu selection in 3 languages
Operating systems: WIN NT 4.0 SP6, WIN 2000
SP3, WIN XP SP2

ECP-SOFT

Connection cable

CAN cable to ISO 11898

Empty module
Interface switch

Filter

Insert labels

Programming software
CoDeSys-Programming system, according to IEC 61131-1
with. Instruction list, ST, KOP, FBS, AS, CFC. Bus configuration
CANopen, Profibus DP, XI/OC, creation of visualisation for
simulation & WEB-visualisation OPC configurator, many
online- & help functions. Supports XC100, XC200, EC4-200
Documentation as PDF file
* Discount code M02.

296

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
ELC Programmable logic controllers

ELC - PA 10 A A D R
Digital Outputs

Device Types
Digital Inputs
Analogue Inputs

Analogue Outputs

A	=	AC
D	=	DC
N	=	None

A	=	 Analog
N	=	 None

A	=	 Analog
N	=	 None

T	 =	Transistor
R	 =	Relay
I	 =	 High Current Relay
N	=	None

I/O Count
xx = Total number of I/O

Automation & Control

PB	 =	 Processor w/o clock
PC	 =	 Processor w/ clock
PH	 =	 Processor w/ clock and high-speed I/O
PA	 =	 Processor w/ clock and embedded
		analog
PV	 =	 Processor w/ clock, high-speed I/O
		 and high-speed CPU
AN	 =	 Analogue Expansion Module
EX	 =	 Digital Expansion Module
PT	 =	 Platinum RTD Expansion Module
TC	 =	 Thermocouple Expansion Module

ELC Eaton Logic Controller
•	 Sophisticated PLC logic with an extensive set of I/O & communication capabilities, in packages as small as
25mm W x 610mm D x 89mm H

ELC Controllers (PB, PC, PH, PA, PV) 

B57

Inputs

Outputs

Description

AC

DC

Analog

Relay

Transistor

Analog

Max. Current
Consumption
(at 24V dc)

14 I/O PB Series
14 I/O PB Series

—
—

8
8

—
—

6
—

—
6

—
—

150 mA
150 mA

ELC-PB14NNDR
ELC-PB14NNDT

12 I/O PC Series
12 I/O PC Series

8
—
—

—
8
8

—
—
—

4
4
—

—
—
4

—
—
—

150 mA
150 mA
150 mA

ELC-PC12NNAR
ELC-PC12NNDR
ELC-PC12NNDT

12 I/O PC Series

Item No.

12 I/O PH Series

—

8

—

—

4

—

170 mA

ELC-PH12NNDT

10 I/O PA Series
10 I/O PA Series

—
—

4
4

2
2

2
—

—
2

2
2

210 mA
210 mA

ELC-PA10AADR
ELC-PA10AADT

28 I/O PV Series
28 I/O PV Series

—
—

16
16

—
—

12
—

—
12

—
—

220 mA
220 mA

ELC-PV28NNDR
ELC-PV28NNDT

eaton corporation New Zealand Product Guide

297

Power Control
Automation & Control
ELC Programmable logic controllers
Right Side Digital Expansion Modules

B57

Automation & Control

Inputs

Outputs

Description

AC

DC

Relay

Transistor

Max. Current
Consumption
(at 24V dc)

6 Relay OUT (6 Amp)

—

—

6

—

70 mA

ELC-EX06NNNI

AC IN
DC IN
Relay OUT
Transistor OUT
IN / OUT Combo
IN / OUT Combo

8
—
—
—
—
—

—
8
—
—
4
4

—
—
8
—
4
—

—
—
—
8
—
4

50 mA
50 mA
70 mA
70 mA
70 mA
70 mA

ELC-EX08NNAN
ELC-EX08NNDN
ELC-EX08NNNR
ELC-EX08NNNT
ELC-EX08NNDR
ELC-EX08NNDT

16 I/O Expansion — IN / OUT Combo
16 I/O Expansion — IN / OUT Combo

—
—

8
8

8
—

—
8

90 mA
90 mA

ELC-EX16NNDR
ELC-EX16NNDT

8 I/O Expansion — Switch Input

—

8

—

—

20 mA

ELC-EX08NNSN

Right Side Analogue & Specialty Modules

B57

Description

Analogue In

Analogue Out

Mac. Current Consumption (at 24V dc)

Item No.

Analogue In

4

—

90 mA

ELC-AN04ANNN

Analogue Out

—

2

125 mA

ELC-AN02NANN

Analogue Out

—

4

170 mA

ELC-AN04NANN

Analogue In/Out

4

2

90 mA

ELC-AN06AANN

Thermocouple J, K, R, S, T

4

—

90 mA

ELC-TC04ANNN

Platinum RTD, PT100

4

—

90 mA

ELC-PT04ANNN

Other Right Side Specialty Expansion Modules

B57

Description

Item No.

Profibus-DP (Slave)

ELC-COPBDP

DeviceNet (Slave)

ELC-CODNET

RS-485 Easy Connect Adapter, DB9, RJ-12, 2-Pin Connections to RS-485

ELC-485APTR

Motion Control, 1 Axis Module (up to 8 modules per controller)

ELC-MCO1

Left Side Specialty Expansion Modules (Require a PV Series Controller)
Description

Item No.

Ethernet Modbus TCP (Master / Slave)

ELC-COENETM

DeviceNet Scanner (Master / Slave)

ELC-CODNETM

ELC Accessories & Software

298

Item No.

B57

Description

Item No.

ELC Programming Software

ELCSOFT

24 Watt, 1 Amp Power Supply

ELC-PS01

48 Watt, 2 Amp Power Supply

ELC-PS02

Hand-held Programmer (includes ELC-CBHHELC15)

ELC-HHP

Cable to Connect a PC or a GP Unit to ELC, 3 Meters (DB9 pin female to 8-pin DIN)

ELC-CBPCELC3

Cable to Connect a PC to a GP Unit, 3 Meters (DB9 pin female to DB9 pin female)

ELC-CBPCGP3

Program Transfer Module for GP Units

ELC-GPXFERMOD

Program Transfer Module for ELC Controllers

ELC-ACPGMXFR

Plate Mount for Specialty Modules, Qty. 10

ELC-ACCOVER

ELC Starter Kit (includes ELC-PA10AADT, ELC-PS01, ELC-GP04, ELC-CBPCELC3, ELC-CBPCGP3,
ELCSoft, ELCSoft GP)

ELCSTARTKIT1

eaton corporation New Zealand Product Guide

B57

Power Control
Automation & Control
Panelmate Operator Interfaces
Eaton PanelMate Power Pro & EPro
Operator interfaces offer up to 100-page, 5000 message capacity. All models use Windows-based configuration software
with built-in communication interfaces for all popular PLCs & networks, including Cutler-Hammer, Allen-Bradley, Square D,
GE Fanuc, Mitsubishi, Modicon, OMRON, PLC-Direct, Schneider, Siemens, Rockwell, Toshiba, as well as DH, DH+,
Remote I/O, GEnius I/O, DeviceNet, Modbus Plus, & Profibus. Multiple communication interfaces may be run
simultaneously on models PM1755T & above.

PanelMate Power Pro Series
®

PanelMate ePro PS, ES Series
®

B57
Description

Item No.

Panelmate 1100, 7.4" Greyscale LCD, Touchscreen, DC

PM1155T

Panelmate 1100, 7.7" Colour DSTN, Touchscreen, DC

PM1175T

Panelmate 1700, 7.4" Greyscale LCD, Touchscreen, DC

PM1755T

Panelmate 1700, 8.0" Colour DSTN, Touchscreen, DC

PM1775T

Panelmate 1700, 8.4" Colour TFT, Touchscreen, DC

PM1785T

Panelmate 3000, 10.4" Colour TFT, Touchscreen, DC

PM3985T

Panelmate 5000, 13" Colour TFT, Touchscreen, DC

PM5785T

Automation & Control

Flat Panel Power Pro Series Touchscreens

Flat Panel ePro Series Touchscreens
ePro ES, 5.7” Colour STN Display, Touchscreen, OPC, DC

7475T-6

ePro PS Classic, 8.4” Colour TFT Display, Touchscreen (Acrylic), OPC, DC

7685T-8C

ePro PS Classic, 10” Colour TFT Display, Touchscreen (Acrylic), OPC, DC

7685T-10C

ePro PS, 12.1” Colour TFT Display, Touchscreen (Glass), OPC, Painted Steel, DC

7685T-12

ePro PS, 15.0” Colour TFT Display, Touchscreen (Glass), OPC, Painted Steel, DC

7685T-15

ePro PS Classic, Blind Node (no display), OPC, DC

7600C

Flat Panel ePro Series Touchpanel
ePro PS 8.4” Colour TFT Display, Touchpanel OPC, DC c/w memrane keypad

7585K-8

ePro PS 10.4” Colour TFT Display, Touchpanel OPC, DC c/w memrane keypad

7585K-10

ePro 12” Colour TFT Display with ELO touchscreen

7585DT-12

ePro 15” Colour TFT Display with ELO touchscreen

7585DT-15

ePro 17” Colour TFT Display with ELO touchscreen

7585DT-17

Software, Accessories
PanelMate Power Pro software

PMPROSW

ePro configuration software suite for use with ES & PS ePro, including OPC servers/drivers

CANVASPRO

240Vac to 24VDC Power Supply, 160W

PSS160E

NNote: For other PanelMate units, special communication, accessories, etc., contact your nearest Eaton branch.

12.1" Colour TFT
15.0" Colour TFT



-



ePro PS

7600

Display with TS or other input device purchased separately

-

-

-

ePro Canvas
software

7685T-12
7685T-15

Power Pro
software

ePro PS

Ethernet



Enterprise
Edition (extended
capabilities)



Classic - supports
PanelMate
Power Pro &
ePro Canvas
applications

-

Keypad
(TouchPanel)*




Touchscreen*

8.4" Colour TFT
10.4" Colour TFT

Display

7685T-8
7685T-10

Series

ePro PS
ePro PS

Family

Outdoor series

B57
Stainless steel
front panel
options

PanelMate® Selection Guide



-









-









-





-



-











ePro ES

7475T-6

5.7" Colour STN



-

-

-

-

-



Power Pro

1155
1175

7.4" Greyscale LCD
7.7" Colour DSTN





-

-

-

-

-



-

Power Pro

1755
1775
1785

7.4" Greyscale LCD
7.7" Colour DSTN
8.4" Colour TFT





-

-

-

-

-



-



Power Pro

3985

10.4" Colour TFT

Power Pro

5485

13.0" Colour TFT

Power Pro

5785

13.0" Colour TFT









-

-

-

-



-





-

-

-

-



-





-

-

-

-



-

-

-

-





-



-

-

-





-

ePro

7585K-8

8.4" Colour TFT

-



ePro

7585K-10

10.4" Colour TFT

-



eaton corporation New Zealand Product Guide

299

Power Control
Automation & Control
ELC Graphic Touch Panels
Eaton ELC Graphic Touch Panels
•	 High-end features in a low-cost operator interface
•	 Communication through 2 ports simultaneously: RS232 & RS485/422
•	 Connection to all major PLCs with drivers
•	 Process indication by graphs, alarms, etc
•	 10 levels of password protection

B57

Automation & Control

Description

Item No.

Graphic Touch Panels
Touch Panel, 160 x 32 pixels, 10 function keys, monochrome

ELC-GP02

Touch Panel, 128 x 64 pixels, 10 function keys, monochrome

ELC-GP04

Programming Software
Programming Software for ELC graphic touch panels

ELCSOFTGP

Power Supplies
Power Supply, 110-240V AC IN, 24V DC OUT, 24 watts, 1 A

ELC-PS01

Power Supply, 110-240V AC IN, 24V DC OUT, 48 watts, 2 A

ELC-PS02

Programming Cable
Cable PC to ELC (DB9 female to DB9 female)

ELC-CBPCGP3

Cable PC or touch panel to PLC, 3 m (DB9 female to 8-pin DIN)

ELC-CBPCELC3

Program Transfer Module
Program Transfer Module for ELC graphic touch panels

ELC-GPXFERMOD

HMi Operator Interfaces
Eaton HMi Operator Interfaces
•	 High-end features in a low-cost operator interface
•	 Communication through 2 ports simultaneously: RS232 & RS485/422
•	 Connection to all major PLCs with drivers
•	 Process indication by graphs, alarms, etc
•	 10 levels of password protection

B57
Description

Item No.

HMi 4" Blue Mode Touchscreen

HMI04BU

HMi 4" Grey Scale Touchscreen

HMI04GU

HMi 6" Blue Mode with Expansion Slot

HMI06BE

HMi 6" Grey Scale Mode with Expansion Slot

HMI06GE

HMi 6" Colour Mode with Expansion Slot

HMI06CE

HMi 8" Colour Mode with Expansion Slot

HMI08CE

HMi 10" Colour Mode with Expansion Slot

HMI10CE

HMi Programming Software

HMISOFT

NNote: Please use a standard USB cable as a programing cable between HMI & PC.

300

eaton corporation New Zealand Product Guide

Automation & Control
LS - Titan Position Switches

2/2System Overview
System overview
LS-Titan position switches
Moeller SK0211-1158GB-AUS
LS, LSM

Basic unit

Automation & Control

Position switches, proximity switches,
pressure switches, float switches

Power Control

Fixing adaptor
for RMQ-Titan control
circuit devices

Roller lever

Angled
roller lever

Rotary lever

Roller plunger
Adjustable
roller lever

Spring-rod
Actuating rod

RMQ-Titan front elements

New LS safety limit switches now available – please enquire.
• Positions reliably registered
• Screw terminals
• Metal or insulated
• Positively opening contacts
• Simple mounting of the various operating heads

eaton corporation New Zealand Product Guide

301

Power Control
Automation & Control
LS-Titan Position Switches
Basic units
LS-Titan position switches are quick & easy to install, highly flexible & safe. Rated to IP66, the LS-Titan range is available in two versions: For normal
operating conditions in corrosive environments, or in the food industry, the LS versions have a totally insulated housing, whereas the LSM versions
in their robust metal enclosures are suited to mechanically harsher environments.
All devices are actuated mechanically & with their positively opening & interlocked opposing contacts, are suitable for use in safety circuits. A unique
feature is the ability to combine LS-Titan with pushbutton actuators, selector switches or Emergency-Stop buttons from the RMQ-Titan range. These
can simply be snapped on to act as the operating head of the position switch.

Automation & Control

The LSE (limit switch electronic) has a freely programmable operating point that can be easily set. Just move the plunger from the original position
to the new switching position & press the ‘teach-in’ button with a screwdriver for 1 second. Once the LED flashes at a higher rate, the new position
is accepted & is usable. The switching point is freely adjustable within a range of 0.5 to 5.5 mm.

Features & benefits:
•	 Conform to EN 50047, so ensuring interchangeability
•	 Modular range of basic units & operating heads are quickly & easily installed with a bayonet catch, offering flexibility
of application
•	 Maintenance free & vibration resistant cage clamp terminals

M00
Description

Contacts

Item No.

Standard action contacts

1 N/O, 1 N/C

LS-11

Make-before-break contacts

1 N/O, 1 N/C

LS-11D

Snap-action contacts

1 N/O, 1 N/C

LS-11S

Standard action contacts

2 N/O

LS-20

Standard action contacts

2 N/C

LS-02

1 N/O, 1 N/C

LSE-11

2 N/C

LSE-02

Standard action contacts

1 N/O, 1 N/C

LSM-11

Make-before-break contacts

1 N/O, 1 N/C

LSM-11D

Snap-action contacts

1 N/O, 1 N/C

LSM-11S

Standard action contacts

2 N/O

LSM-20

Standard action contacts

2 N/C

LSM-02

For operation by RMQ-Titan actuators

-

M22-LS

Insulated, enclosed units, IP66, rounded plunger
Basic units

Basic units with electronically adjustable operating point
Indicator light 

Metal, enclosed units, IP66, rounded plunger
Basic units

Accessories
Fixing adapter



302

To show status (optical status display safety category 3, EN 954-1) adjustment see page 342.

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
LS-Titan Position Switches
Operating heads

M00
Description

Insulated version Item No.

Metal version Item No.

–

LS-XP

LSM-XP

–

LS-XL

LSM-XL

–

LS-XLA

LSM-XLA

–

LS-XRL

LSM-XRL

D = 18 mm

LS-XRLA

LSM-XRLA

D = 30 mm

LS-XRLA30

–

D = 40 mm

LS-XRLA40

–

D = 40 mm (rubber)

LS-XRLA40R

–

Plastic rod

LS-XRR

LSM-XRR

Metal rod

LS-XRRM

LSM-XRRM

LS-XS

LSM-XS

Operating heads
The operating heads can be rotated in 90° stages to match the specified direction of operation.

Roller lever

Angled roller lever

Automation & Control

Roller plunger

Rotary lever

Adjustable roller lever

Actuating rod

Spring-rod
Not to be used as a safety position switch Use only in conjunction with snap-action contact.
–

eaton corporation New Zealand Product Guide

303

Power Control
Automation & Control
LS-Titan Position Switches
LS-Titan position switches

Cross reference
Cross reference for new LS system

New LS system

Established system

Insulated version

Metal version

LS-11…

LSM-11…

Basic units
Limit switch basic unit

AT0-11…

Automation & Control

Operating heads
Roller plunger

LS-XP

LSM-XP

RS-AT0

Roller lever

LS-XL

LSM-XL

AR-AT0

Angled roller lever

LS-XLA

LSM-XLA

WR-AT0

Rotary lever

LS-XRL

LSM-XRL

R-AT0

Adjustable roller lever

LS-XRLA (D = 18 mm)

LSM-XRLA (D = 18 mm)

V-AT0

LS-XRLA30 (D = 30 mm)

–

–

LS-XRLA40 (D = 40 mm)

–

–

LS-XRLA40R (D = 18 mm, rubber)

–

–

Actuating rod

–

–

H-AT0

	

Insulated rod

LS-XRR

LSM-XRR

–

	

Metal rod

Spring rod

LS-XRRM

LSM-XRRM

–

LS-XS

LSM-XS

F-AT0

M22-LS
2/12Fixing adaptor
Engineering
Roller plunger
–
LS-Titan position switches

Position switches, proximity switches,
pressure switches, float switches

Plunger

–

M22-LS

–

–

ZRS-AT0

–

ZS-AT0

Moeller SK0211-1158GB-AUS
Individual operating point adjustment
adjust
fix

1s

LED
Set

fmax F 2 N

Set

Circuit examples
LSE-11 and LSE-02 can be used in safety-oriented circuits.
Parallel circuit
+ 24 V
LS-..

LSE-11

LSE-11
+Ue

+Ue

S1

S3

S2

Q1

Q1

Q2

Q2

M22-XLED-T

0V

M22-XLED-T

0V

K1
0V

Series circuit
+ 24 V

LSE-11

LSE-11
+Ue

LS-..

+Ue

S1

S3

Q1

Q1

LSE-11
+Ue

Q2
0V

S5

LSE-11
+Ue

Q2

S2

0V

S4

Q1

Q1

Q2
0V

0V

S1 is connected to 24 V DC
S2, S3, S4 each switch with a delay of 0.7 s

304

eaton corporation New Zealand Product Guide

Q2
0V

K1

Power Control
Automation & Control
E50 Heavy duty modular Limit Switches
Eaton E50 Limit Switches are available with or without indicating LED, in single- or 2-pole versions.
Optional manifold mount & submersible versions available.
Complete switch = body + receptacle + Head

Indicating light

Switch body Item No.

Receptacle Item No.

None

E50SA, 1N.O.-1N.C.

E50RA

LED (24 - 120V AC/DC)

E50SAL, 1N.O.-1N.C.

-

Switch body

Single Pole
(5 Terminal)

Assembled Switch
None

E50SB, 2N.O.-2N.C.

E50RB

LED (24 - 120V AC/DC)

E50SBL, 2N.O.-2N.C.

-

Double Pole
(9 Terminal)

Switch body

B51
Operating Head Type

Item No.

Automation & Control

B51

B51
Operating Head Type

Item No.
E50DH1

Side Pushbutton,
Maintained - E50DH1

Side Rotary
(Requires an operating Lever,
see next page)

E50DT1

Standard Spring Return

E50DR1

Low Force Spring Return

E50DL1

Maintained Two position

E50DM1
E50DS1

Side Pushbutton,
Spring Return - E50DS1
E50DS2

Top Pushbutton,
Spring Return - E50DT1
E50DT2

Top Pushbutton,
Adjustable Spring Return - E50DT2
E50DT3

Side Pushbutton,
Spring Return - E50DS2
E50DS3

Side Push Rolller,
Spring Return - E50DS3
For assembled Limit Switch pricing, contact your nearest Eaton branch.

Top Push Roller,
Spring Return - E50DT3

Wobble Head Spring Return (requires a wobble
operator,
see next page)
Standard Duty

E50DW1

Heavy-Duty High Strength Steel

E50DW2

For assembled Limit Switch pricing, contact your nearest Eaton branch.

eaton corporation New Zealand Product Guide

305

Power Control
Automation & Control
Finalise Your Limit Switch Installation with
Right Operator for the Job

E50 Heavy duty modular Limit Switches
Finalise Your Limit Switch Installation with the right operator for the job
Operating Levers - various operators are available, which suit standard E50 & special purpose E50 Limit switches.

B51
Length (mm)

Type

Roller dia. (mm)

Roller width (mm)

Item No.

12.7-95.3

nylon

19.1

7.9

E50KL201

12.7-95.3

nylon

19.1

12.7

E50KL599

Automation & Control

Operator
Stainless steel, adjustable

Cast aluminium standard lever

Fork lever, both rollers one side

Fork lever, 1 roller out/1 inside

306

12.7-95.3

nylon

19.1

25.4

E50KL537

28.5-95.3

nylon

38.1

7.1

E50KL443

12.7-82.6

nylon

102

2.8

E50KL598

12.7-95.3

metal

19.1

7.9

E50KL538

12.7-95.3

ball bearing

17.5

6.4

E50KL539

76.2-127

no roller

-

-

E50KL31

22.2mm

metal

19.1

7.9

E50KL39

34.9mm

metal

19.1

7.9

E50KL40

38.1mm

nylon

19.1

7.9

E50KL200

38.1mm

nylon

19.1

25.4

E50KL377

38.1mm

metal

19.1

7.9

E50KL355

38.1mm

ball bearing

17.5

6.4

E50KL531

50.8mm

no roller

-

-

E50KL32

50.8mm

nylon

19.1

7.9

E50KL546

50.8mm

nylon

19.1

25.4

E50KL572

50.8mm

metal

19.1

7.9

E50KL549

63.5mm

ball bearing

17.5

6.4

E50KL552

63.5mm

nylon

19.1

7.9

E50KL547

63.5mm

nylon

19.1

25.4

E50KL573

63.5mm

nylon

38.1

7.1

E50KL575

63.5mm

metal

19.1

7.9

E50KL550

63.5mm

ball bearing

17.5

6.4

E50KL553

76.2mm

nylon

19.1

7.9

E50KL548

76.2mm

nylon

19.1

25.4

E50KL574

76.2mm

nylon

38.1

7.1

E50KL576

76.2mm

metal

19.1

7.9

E50KL551

76.2mm

ball bearing

17.5

6.4

E50KL554

38.1mm

nylon

19.1

7.9

E50KL204

38.1mm

nylon

19.1

25.4

E50KL543

38.1mm

metal

19.1

7.9

E50KL544

38.1mm

ball bearing

17.5

6.4

E50KL545

38.1mm

nylon

19.1

7.9

E50KL203

38.1mm

nylon

19.1

25.4

E50KL540

38.1mm

metal

19.1

7.9

E50KL541

38.1mm

ball bearing

17.5

6.4

E50KL542

Delrin rod for wobble head switch (82.6mm long), rod diameter 6.4mm

E50KW2

Stainless steel rod for wobble head (305mm long), rod diameter 1.6mm

E50KW3

Coil spring for wobble head switch (102mm long), spring diameter 8.7mm

E50KW4

Nylon roller, adjustable

E50KL37

Nylon roller, adjustable DIP

E50KL37D1P

Stainless steel rod, adjustable

E50KL220

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
E49 metal body compact Limit Switches
Eaton E49 Compact Metal Limit Switches
•	 Rigid die cast switch housing
•	 High mechanical strength
•	 Oil-tight, waterproof & dustproof construction
•	 Snap action 1NO/1NC contact provides flexibility in design

Operating Head Type

Specifications

Item No.

Travel to Operate
Contacts

Travel to Reset Contacts

Total Travel

Force to Operate Contacts
(Maximum) (lb)

Minimum Return Force
(lb)

Assembled Units (Switch
Body & Head), 1N.O./1N.C.
Contacts

20°

12°

50°

2.99

0.50

E49M11AP1

0.067 in
(1.7mm)

0.04 in
(1.0mm)

-

6.02

2.01

E49M11BP1

0.067 in
(1.7 mm)

0.04 in
(1.0 mm)

0.25 in
(6.5 mm)

6.02

2.01

E49M11CP1

20°

12°

50°

0.31

0.06

E49M11DP1

20°

12°

50°

2.99

0.50

E49M11UP1

1.10 in (28mm)

N/A

N/A

0.33

N/A

E49M11VP1

1.10 in (28mm)

N/A

N/A

0.064

N/A

E49M11XM1

Automation & Control

B51

Roller Lever

Top Push

E49M11CP2*

Top Push Roller
- E49M11CP1

Rod Lever

Adjustable Roller Lever

Wobble

Cat Whisker
* Includes 90° Roller.

eaton corporation New Zealand Product Guide

307

Power Control
Automation & Control
E49 metal body compact Limit Switches

Automation & Control

Eaton E49 Mini Metal Limit Switches
•	 Long life - rated for 10 million operations
•	 Pre-wired units with custom cable lengths available for high volume customers
•	 Fingerproof terminals protect against accidental contact
•	 Double-spring mechanism for contact reliability
•	 Grounding terminal included
•	 Captive screws on enclosure cover make wiring hassle-free
•	 SPDT double break

B51
Operating Head Type

Specifications

Item No.

Travel to Operate
Contacts

Travel to Reset Contacts

Total Travel

Force to Operate Contacts
(g)

Minimum Return Force (g)

Assembled Units (Switch
Body & Head), 1N.O./1N.C.
Contacts

20°

12°

70°

750

100

E49G31AP3

20°

12°

70°

750

100

E49G31UP3

0.06 in
(1.5 mm)

0.04 in
(1 mm)

0.22 in
(5.5 mm)

900

150

E49G31BP3

0.06 in
(1.5 mm)

0.04 in
(1 mm)

0.22 in
(5.5 mm)

900

150

E49G31CP3

0.06 in
(1.5 mm)

0.04 in
(1 mm)

0.22 in
(5.5 mm)

900

150

E49G31C1P3*

20°

12°

70°

750

100

E49G31DP3

Side Rotary Lever

Adjustable Side Rotary
Lever

Top Pushbutton

Top Push Roller

Top Push Roller

Adjustable Rod Lever
* Includes 90° Roller.

308

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
E49 metal body compact Limit Switches
B51
Specifications

Item No.

Travel to Operate Contacts

Travel to Reset Contacts

Total Travel

Force to Operate Contacts
(g)

Minimum Return Force (g)

Assembled Units (Switch
Body & Head), 1N.O./1N.C.
Contacts

1.18 in
(30 mm)

-

-

150

-

E49G31NP3

1.18 in
(30 mm)

-

-

150

-

E49G31VP3

1.18 in
(30 mm)

-

-

150

-

E49G31MP3

1.18 in
(30 mm)

-

-

150

-

E49G31XM3

Wobble Stick
(Nylon Coil)

Automation & Control

Operating Head Type

Wobble Stick
(Metal Coil)

Wobble Stick
(Metal Rod)

Wobble Stick
(Whisker)

eaton corporation New Zealand Product Guide

309

Power Control
Automation & Control
E49 plastic modular DIN Limit Switches

Automation & Control

Eaton E49 Miniature Plastic DIN Limit Switches
•	 Non-metallic housing is ideal for corrosive environments
•	 Fingerproof terminals & double insulated enclosures protect against accidental contact
•	 Generous wiring space speeds installation
•	 Electrically isolated contacts eliminate polarity restrictions for electrical loads
•	 Positive opening N.C. contacts improve reliability by positively breaking the N.C. contacts during operation,
eliminating light welding/sticking conditions
•	 Modular design allows flexibility to replace operating head when required

B51
Operating Head
Type

Specifications
Travel to Operate
Contacts

Travel to
Operate Pos. Break
N.C Contacts

Travel to Reset
Contacts

Total Travel

Force to Operate
Contacts
(Maximum)

Minimum Return
Force (lb)

Item No.

Item No.

Operating
Head Only

Assembled Units
(Switch Body &
Head)
1N.O.-1N.C.
Contacts

35°

55°

15°

76°

1.16 in-lb

0.76 in-lb

E49AP7

E49S71AP7

0.12 in
(3.0 mm)

0.19 in
(4.8 mm)

0.05 in
(1.3 mm)

0.23 in
(5.8 mm)

1.79 lb

1.14 lb

—

E49S71

0.11 in
(2.8 mm)

0.19 in
(4.8 mm)

0.04 in
(1.0 mm)

0.23 in
(5.8 mm)

1.81 lb

0.95 lb

E49CP7

E49S71CP7

35°

55°

16°

76°

0.80 in-lb

0.49 in-lb

E49DP7

E49S71DP7*

0.14 in
(3.6 mm)

0.12 in
(3.0 mm)

0.06 in (1.5 mm)

0.30 in
(7.6 mm)

1.7 lb

0.78 lb

E49EP7

E49S71EP7

35°

55°

16°

75°

0.88 in-lb

0.58 in-lb

E49UP7

E49S71UP7

Side Rotary

Top Push Plunger

Top Push Roller

Rod Lever

Offset Roller Lever

Adjustable Roller
Lever

310

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
E49 plastic modular DIN Limit Switches
Eaton E49 Miniature Plastic DIN Limit Switches (continued)B51
Specifications

Item No.

Item No.

Travel to Operate
Contacts

Travel to
Operate Pos. Break
N.C Contacts

Travel to Reset
Contacts

Total Travel

Force to Operate
Contacts
(Maximum)

Minimum Return
Force (lb)

Assembled Units (Switch Body & Head)

2N.O. Contacts

2N.C. Contacts

35°

55°

15°

76°

1.16 in-lb

0.76 in-lb

E49S74AP7

E49S73AP7

0.12 in
(3.0 mm)

0.19 in
(4.8 mm)

0.05 in
(1.3 mm)

0.23 in
(5.8 mm)

1.79 lb

1.14 lb

E49S74

E49S73

0.11 in
(2.8 mm)

0.19 in
(4.8 mm)

0.04 in
(1.0 mm)

0.23 in
(5.8 mm)

1.81 lb

0.95 lb

E49S74CP7

E49S73CP7

35°

55°

16°

76°

0.80 in-lb

0.49 in-lb

E49S74DP7

E49S73DP7

0.14 in
(3.6 mm)

0.12 in
(3.0 mm)

0.06 in
(1.5 mm)

0.30 in
(7.6 mm)

1.7 lb

0.78 lb

E49S74EP7

E49S73EP7

35°

55°

16°

75°

0.88 in-lb

0.58 in-lb

E49S74UP7

E49S73UP7

Side Rotary

Automation & Control

Operating Head
Type

Top Push Plunger

Top Push Roller

Rod Lever

Offset Roller Lever

Adjustable Roller
Lever

eaton corporation New Zealand Product Guide

311

Power Control
Automation & Control
10316H series Rotating Shaft Limit Switches
Eaton 10316H Rotating Shaft Limit Switches - are a geared design for use in control circuits with AC or DC motors on garage doors,
windows, small hoists, etc. Comes in general purpose & heavy duty versions.

Automation & Control

General Purpose

Heavy Duty

Construction

die cast zinc

cast iron

Contacts

2

4

Protection

IP54

IP66

B51
Description

Contacts

Item No.

General purpose limit switch

1N.O.-1N.C.

10316H77

General purpose limit switch

2N.C.

10316H50

Heavy duty limit switch

2N.O - 2N.C.

10316H54

Flexible coupling for these switches

-

93321H010

NNote: On general purpose switch, one contact can be independently adjusted to trip in the clockwise direction & the other contact can be independently adjusted to trip in the counter-clockwise direction. On the heavy duty switch,
two contacts can be independently adjusted to trip in the clockwise direction & the other two contacts can be independently adjusted to trip in the counter-clockwise direction. Heavy duty switch is convertible to 4N.O. or
4N.C contacts.

ME40 single- & two-pedal Foot Switches
Eaton ME40 Heavy Duty Foot Switches - in single & double pedal, guarded or unguarded. Guarded shown left.
All switches are IP65 rated & have anti-slip base plates which can be screwed into position. Triple pedal version also available on special order.

B51
Foot Switch

Type

Contacts

Item No.

1-pedal unguarded

spring return

1N.O.-1N.C.

ME40BW03A

spring return

2N.O.-2N.C.

ME40BW13A

2-stg operation

2N.O.-2N.C.

ME40BW13D

maintained

1N.O.-1N.C.

ME40BW03A1

spring return

2N.O - 2N.C.

ME40BW13B

2-stg operation

2N.O.-2N.C.

ME40BW13E

spring return

1N.O.-1N.C.

ME40BW03A2

spring return with emergency stop

1N.O.-1N.C.

ME40BW03A21

spring return

2N.O.-2N.C.

ME40BW13A2

2-stg operation

2N.O.-2N.C.

ME40BW13D2

maintained

1N.0.-1N.C.

ME40BW03A3

spring return

2N.O.-2N.C.

ME40BW13B2

2-pedal unguarded

1-pedal guarded

2-pedal guarded

312

2-stg operation

2N.O.-2N.C.

ME40BW13E2

contact block to suit ME40BW03A1

-

1N.O.-1N.C.

600.6101.060

contact block to suit ME40BW03A

-

1N.O.-1N.C.

600.6351.039

contact block to suit ME40BW13A

-

2N.0.-2N.C.

600.6451.117

contact block to suit ME40BW13D

-

2N.O.-2N.C.

600.6451.130

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
E2020 Heavy Duty Pull Wire Switches
Eaton 2020 Trip/Pull Wire Switches - are available in either cast iron, aluminium.
All feature failsafe design & IP65 protection.

Construction

Contacts

Item No.

Aluminium

1 NO - 1NC

E2020-A2P 

Cast iron

1 NO - 1 NC

E2020-C2P 




Replacement suffix for aluminium.
Replacement suffix for cast iron.

Contact block options
Description

Automation & Control

B57

Suffix

Aluminium 2N.0.-2N.C. contact block

A4P 

Aluminium 3N.O.-3N.C. contact block

A6P 

Aluminium 4N.O.-4N.C. contact block

A8P 

Cast iron 2N.0.-2N.C. contact block

C4P 

Cast iron 3N.O.-3N.C. contact block

C6P 

Cast iron 4N.O.-4N.C. contact block

C8P 

Contact block AC2, 5A; 250V 3A; 415V 10A thermal is standard (units with higher ratings supplied on special order).
Failsafe Trip maintains switch in tripped position until pull wires are connected & adjusted.



Replacement suffix for aluminium.
Replacement suffix for cast iron.

Optional Extras (to order, add suffix to end of Item No. of switch above)
Description

Suffix

Top dome light (no globe)

DL

Blinking feature for dome light

B

Wire guard for dome light

PG

Transparent safety window

W

Flag indicator in front cover

F

Single-ended operation, left

SLH

Single-ended operation, right

SRH

Extra 12-way terminal block

TB

Plastic covered galvanised wire rope, 100m

A1

Galvanised U bolts, 3/4”

A2

Galvanised turnbuckle, 5/16”

A3

Galvanised wire clamp

A4

Galvanised wire rope thimble

A5

End-of-line spring

G1511-2

eaton corporation New Zealand Product Guide

313

Power Control
Automation & Control

Automation & Control

iProx Programmable Proximity Sensors
Eaton iProx Clone Sensor
•	 Replace thousands of sensors with the click of a button using the new iProx programming software for Microsoft Windows or mobile devices
•	 Clone the iProx to match the characteristics of more than 4800 competitor models or custom configure the iProx to meet your specific
application needs
•	 Advanced programmable features such as dual outputs, output delay, speed detection, adjustable sensing range & more.
•	 Reliably senses metal targets at up to three times the range of conventional shielded or unshielded inductive proximity sensors
•	 Field programmability reduces inventory & costly downtime
•	 Auto Configuration output allows for automatic detection of NPN or PNP
•	 New Remote Programming Device allows for mobile programming - no need to remove the sensor from its application
•	 New Tray Programmer allows for “one touch” programming & batch programming of up to four iProx sensors at a time
•	 Resistant to extreme temperature (-400C) & high pressure washdown
•	 Withstands high electrical noise ( up to 20 V/m).

3-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Shielding

Connection type

Output type

Item No.

12 mm diameter end
sensing

6 – 48V DC

4 mm std range

shielded

Plug-In*

NO Default Setting

E59-M12A105D01-D1 #

18 mm diameter end
sensing

30 mm diameter end
sensing

6 – 48V DC

4 mm std range

shielded

Plug-In*

NC Default Setting

E59-M12A105D01-D2

6 – 48V DC

10 mm ext range

unshielded

Plug-In*

NO Default Setting

E59-M12C110D01-D1 #

6 – 48V DC

10 mm ext range

unshielded

Plug-In*

NC Default Setting

E59-M12C110D01-D2

6 – 48V DC

8 mm std range

shielded

Plug-In*

NO Default Setting

E59-M18A108D01-D1 #

6 – 48V DC

8 mm std range

shielded

Plug-In*

NC Default Setting

E59-M18A108D01-D2

6 – 48V DC

18 mm ext range

unshielded

Plug-In*

NO Default Setting

E59-M18C116D01-D1 #

6 – 48V DC

18 mm ext range

unshielded

Plug-In*

NC Default Setting

E59-M18C116D01-D2

6 – 48V DC

15 mm std range

shielded

Plug-In*

NO Default Setting

E59-M30A115D01-D1 #

6 – 48V DC

15 mm std range

shielded

Plug-In*

NC Default Setting

E59-M30A115D01-D2

6 – 48V DC

29 mm ext range

unshielded

Plug-In*

NO Default Setting

E59-M30C129D01-D1 #

6 – 48V DC

29 mm ext range

unshielded

Plug-In*

NC Default Setting

E59-M30C129D01-D2

* Order connector cable CSDS4A4CY2202 listed below for use with the above plug-in sensors.
# Dual outputs available on these models. Specify dual PNP or NPN by adding PP or NN to the end of the Item No. when asking for a quote.

AccessoriesB51

314

Description

Item No.

4-pin 4-wire cable, 2 m long, with straight micro DC connector female

CSDS4A4CY2202

Programmer to program iProx sensors one-at-a-time (through serial port on PC)

E59RP1

Step-by-step programming software (compatible with Windows mobile devices)

E59SW1

Remote Programming Device (PDA) for portable programming c/w software & cables

E59RPD

Tray Programmer - programs up to 4 iProx Clone sensors at a time

E59TP1

Field-applied iProx labels for iProx Clone sensors (100 pcs)

E59LABEL

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
AccuProx Analogue output Proximity Sensors

3-Wire sensors

B51

Model selection

Operating voltage

12mm diameter

15 – 30V DC

18mm diameter

30mm diameter

15 – 30V DC

15 – 30V DC

Sensing range

Shielding

Connection type

Item No.

0.5 - 4 mm

Shielded

Plug-in*

E59-A12A104D01-CV

1 - 8 mm

Unshielded

Plug-in*

E59-A12C108D01-CV

1 - 7 mm

Shielded

Plug-in*

E59-A18A107D01-CV

1 - 15 mm

Unshielded

Plug-in*

E59-A18C115D01-CV

1 - 12 mm

Shielded

Plug-in*

E59-A30A112D01-CV

1 - 25 mm

Unshielded

Plug-in*

E59-A30C125D01-CV

Automation & Control

Eaton AccuProx Analogue Sensor
•	 Unmatched sensing range, linearity & resolution
•	 Outputs available in current (4-20mA/0-20mA) & voltage(0-10V)
•	 Stainless steel barrel, ideal for high temperature or washdown environments
•	 Detecting different metals, eccentricity or absolute angle detection
•	 Available in 12, 18 & 30 mm diameter tubular
•	 10-30V DC supply, shielded or unshielded type
•	 2 metre prewired cable or plug-in connector type	
•	 Provide electrical signal that varies in proportion to the position of metal target

* Order connector cable CSDS4A4CY2202 listed below for use with the above plug-in sensors.

SpeedSense Proximity Sensors
Eaton SpeedSense Inductive Proximity Sensors
•	 Built-in speed detection technology activates the sensor when the target’s rotational or lateral speed slows
(output “closes” when motion stops)
•	 Outputs are N.O. by default, but N.C. models can be special ordered from the factory
•	 Reliably detects metal targets at up to three times range of conventional inductive proximity sensors
•	 No special programming necessary
•	 Auto-configure output allows for automatic NPN or PNP
•	 Resistant to extreme temperature (-40°C) & high pressure washdown
•	 High electrical noise immunity of 10 V/m

3-Wire sensors

B51

Model selection

Sensing range

Shielding

Maximum Rated Target Speed*

12mm diameter

4 mm

Shielded

2175 rpm, 27.5 ms

10 mm

18mm diameter

30mm diameter

8 mm

15 mm

Unshielded

Shielded

Shielded

1125 rpm, 53 ms

1460 rpm, 41 ms

900 rpm, 66 ms

Activation Point*

Item No.

50 rpm or 1200 ms

E59-M12A105D01-D1S1

100 rpm or 600 ms

E59-M12A105D01-D1S2

500 rpm or 120 ms

E59-M12A105D01-D1S3

1500 rpm or 40 ms

E59-M12A105D01-D1S4

50 rpm or 1200 ms

E59-M12C110D01-D1S1

100 rpm or 600 ms

E59-M12C110D01-D1S2

500 rpm or 120 ms

E59-M12C110D01-D1S3

50 rpm or 1200 ms

E59-M18A108D01-D1S1

100 rpm or 600 ms

E59-M18A108D01-D1S2

500 rpm or 120 ms

E59-M18A108D01-D1S3

50 rpm or 1200 ms

E59-M30A115D01-D1S1

100 rpm or 600 ms

E59-M30A115D01-D1S2

500 rpm or 120 ms

E59-M30A115D01-D1S3

* Sensor will not perform reliably if (a) target speed rotation exceeds the max rated rpm or (b) the time between target detections is less than the rated milliseconds.
The sensor will activate when (a) target rotation drops below the rated rpm, or (b) when the time between two target detections exceeds the milliseconds indicated.
Order connector cable CSDS4A4CY2202 listed below for use with all the above plug-in sensors.

Connector Cable

B51

Description

Item No.

4-pin 4-wire cable, 2m long, with straight micro DC connector female

CSDS4A4CY2202

eaton corporation New Zealand Product Guide

315

Power Control
Automation & Control

Automation & Control

General purpose Inductive Proximity Sensors
Eaton Global Plus Inductive Proximity Sensors
•	 The Global Plus Proximity Line features solid performance & a basic
feature set for reliable, cost-effective sensing
•	 Available in a variety of sizes to fit in all of your applications: 8 mm, 12 mm,
18 mm & 30 mm diameters
•	 DC sensors operate on 10 – 30V DC in 2-wire & 3-wire (NPN or PNP) Configurations
•	 AC sensors operate on 20 – 250V AC in 2-wire configuration
•	 Shielded & unshielded versions available
•	 Terminations include 2-metre cable & plug-in connector
•	 Bright output LED indicator to show output status
•	 Optimal solution for high volume OEM customers

2-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Shielding

Connection type

Output type

Item No.

12 mm diameter

20 – 250V AC

2 mm

Shielded

2-metre Cable

N.O.

E57-12PAS02-A

18 mm diameter

30 mm diameter

20 – 250V AC

2 mm

Shielded

2-metre Cable

N.C.

E57-12PBS02-A

20 – 250V AC

4 mm

Unshielded

2-metre Cable

N.O.

E57-12PAU04-A

20 – 250V AC

4 mm

Unshielded

2-metre Cable

N.C.

E57-12PBU04-A

20 – 250V AC

5 mm

Shielded

2-metre Cable

N.O.

E57-18PAS05-A

20 – 250V AC

5 mm

Shielded

2-metre Cable

N.C.

E57-18PBS05-A

20 – 250V AC

8 mm

Unshielded

2-metre Cable

N.O.

E57-18PAU08-A

20 – 250V AC

8 mm

Unshielded

2-metre Cable

N.C.

E57-18PBU08-A

20 – 250V AC

10 mm

Shielded

2-metre Cable

N.O.

E57-30PAS10-A

20 – 250V AC

10 mm

Shielded

2-metre Cable

N.C.

E57-30PBS10-A

20 – 250V AC

15 mm

Unshielded

2-metre Cable

N.O.

E57-30PAU15-A

20 – 250V AC

15 mm

Unshielded

2-metre Cable

N.C.

E57-30PBU15-A

Operating voltage

Sensing range

Shielding

Connection type

Output type

Item No.

3-Wire sensors
Model selection
8 mm diameter

12 mm diameter

18 mm diameter

30 mm diameter

316

B51
10 – 30V DC

1.5 mm

Shielded

2-metre Cable

N.O.(NPN)

E57-08PAS15-C

10 – 30V DC

1.5 mm

Shielded

2-metre Cable

N.O.(PNP)

E57-08PAS15-G

10 – 30V DC

2 mm

Unshielded

2-metre Cable

N.O.(NPN)

E57-08PAU02-C

10 – 30V DC

2 mm

Unshielded

2-metre Cable

N.O.(PNP)

E57-08PAU02-G

10 – 30V DC

2 mm

Shielded

2-metre Cable

N.O.(NPN)

E57-12PAS02-C

10 – 30V DC

2 mm

Shielded

2-metre Cable

N.O.(PNP)

E57-12PAS02-G

10 – 30V DC

4 mm

Unshielded

2-metre Cable

N.O.(NPN)

E57-12PAU04-C

10 – 30V DC

4 mm

Unshielded

2-metre Cable

N.O.(PNP)

E57-12PAU04-G

10 – 30V DC

5 mm

Shielded

2-metre Cable

N.O.(NPN)

E57-18PAS05-C

10 – 30V DC

5 mm

Shielded

2-metre Cable

N.O.(PNP)

E57-18PAS05-G

10 – 30V DC

8 mm

Unshielded

2-metre Cable

N.O.(NPN)

E57-18PAU08-C

10 – 30V DC

8 mm

Unshielded

2-metre Cable

N.O.(PNP)

E57-18PAU08-G

10 – 30V DC

10 mm

Shielded

2-metre Cable

N.O.(NPN)

E57-30PAS10-C

10 – 30V DC

10 mm

Shielded

2-metre Cable

N.O.(PNP)

E57-30PAS10-G

10 – 30V DC

15 mm

Unshielded

2-metre Cable

N.O.(NPN)

E57-30PAU15-C

10 – 30V DC

15 mm

Unshielded

2-metre Cable

N.O.(PNP)

E57-30PAU15-G

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
General purpose Inductive Proximity Sensors

2-Wire sensors

B51
N/C output
Item No.

Model selection

Operating voltage

Sensing range

Shielding

Connection type

N/O output Item No.

12 mm diameter end
sensing

20-250VAC

2 mm std range

shielded

2-metre cable

E57LAL12A2

E57LBL12A2

20-250VAC

4 mm std range

unshielded

2-metre cable

E57LAL12A2E

E57LBL12A2E

18 mm diameter end
sensing

30 mm diameter end
sensing

20-250VAC

6 mm ext range

semi-shielded

2-metre cable

E57-12LE06-A

E57-12LE06-A1

20-250VAC

10 mm ext range

non-embeddable

2-metre cable

E57-12LE10-A

E57-12LE10-A1

20-250VAC/DC

2 mm std range

shielded

2-metre cable

E57SAL12A2

E57SBL12A2

20-250VAC/DC

4 mm std range

unshielded

2-metre cable

E57SAL12A2E

E57SBL12A2E

20-250VAC

5 mm std range

shielded

2-metre cable

E57LAL18A2

E57LBL18A2

20-250VAC

8 mm std range

unshielded

2-metre cable

E57LAL18A2E

E57LBL18A2E

20-250VAC

12 mm ext range

semi-shielded

2-metre cable

E57-18LE12-A

E57-18LE12-A1

20-250VAC

20 mm ext range

non-embeddable

2-metre cable

E57-18LE20-A

E57-18LE20-A1

20-250VAC/DC

5 mm std range

shielded

2-metre cable

E57SAL18A2

E57SBL18A2

20-250VAC/DC

8 mm std range

unshielded

2-metre cable

E57SAL18A2E

E57SBL18A2E

20-250VAC

10 mm std range

shielded

2-metre cable

E57LAL30A2

E57LBL30A2

20-250VAC

15 mm std range

unshielded

2-metre cable

E57LAL30A2E

E57LBL30A2E

20-250VAC

22 mm ext range

semi-shielded

2-metre cable

E57-30LE22-A

E57-30LE22-A1

20-250VAC/DC

10 mm std range

shielded

2-metre cable

E57SAL30A2

E57SBL30A2

20-250VAC/DC

15 mm std range

unshielded

2-metre cable

E57SAL30A2E

E57SBL30A2E

Automation & Control

Eaton E57 Premium+ & Premium Series Inductive Proximity Sensors
•	 Premium+ are designed with stainless steel barrel & new potting compound for robust,
high temperature, high pressure washdown, as well as intense shock & vibration applications
•	 Premium+ has unmatched high noise immunity eliminates problems associated
with electrical noise (all models > 20V/metre)
•	 Premium+ has 360° output status indicator is visible from any angle & in any light condition
•	 Wide temperature range -13 to 158°F (-25 to 70°C)
•	 New expanded offering of 2-wire, 3-wire, AC, DC, & AC/DC multiple range sensor models
•	 Connector models available on request, connector cables are on page
•	 For cable lengths longer than 2 metres, add the number of the desired length in
metres to the end of the listed Item No.

iProx Clone...
Adaptability
Unmatched

The iProx is a field programmable,
adaptable & configurable inductive
proximity sensor with an embedded
microprocessor, which allows for
unique sensing capabilities that solve
the unsolvable.

The iProx Clone adapts to your environment.
Set the sensing distance, operating modes,
teach it to ignore background metals, sense
in a narrow band & more. The iProx can be
pre-configured at the factory to help you save
even more time. Yes. The iProx can do that.
In a nutshell, the iProx is the most versatile
inductive proximity sensor available today.

Using the iProx Programming Software, you
can literally replace thousands of sensors
with just a few clicks of the mouse. When
you need unmatched flexibility, adaptability &
sensing performance, look no further than the
iProx family of sensor products.

For further Information:

0508 328 6669
www.eaton.co.nz

eaton corporation New Zealand Product Guide

317

Power Control
Automation & Control
General purpose Inductive Proximity Sensors

Automation & Control

3-Wire sensors

B51
Item No.
N/O output

Item No.
N/C output

Model selection

Operating voltage

Sensing range

Shielding

Connection type

12 mm diameter end
sensing

6-48VDC

2 mm std range

shielded (NPN)

2-metre cable

E57LAL12T110

E57LBL12T110

6-48VDC

2 mm std range

shielded (PNP)

2-metre cable

E57LAL12T111

E57LBL12T111

18 mm diameter end
sensing

30 mm diameter end
sensing

6-48VDC

4 mm std range

unshielded (NPN)

2-metre cable

E57LAL12T110E

E57LBL12T110E

6-48VDC

4 mm std range

unshielded (PNP)

2-metre cable

E57LAL12T111E

E57LBL12T111E

6-48VDC

6 mm ext range

semi-shielded (NPN)

2-metre cable

E57-12LE06-C

E57-12LE06-C1

6-48VDC

6 mm ext range

semi-shielded (PNP)

2-metre cable

E57-12LE06-B

E57-12LE06-B1

6-48VDC

10 mm ext range

non-embeddable (NPN)

2-metre cable

E57-12LE10-C

-

6-48VDC

10 mm ext range

non-embeddable (PNP)

2-metre cable

E57-12LE10-B

E57-12LE10-B1

6-48VDC

5 mm std range

shielded (NPN)

2-metre cable

E57LAL18T110

E57LBL18T110

6-48VDC

5 mm std range

shielded (PNP)

2-metre cable

E57LAL18T111

E57LBL18T111

6-48VDC

8 mm std range

unshielded (NPN)

2-metre cable

E57LAL18T110E

E57LBL18T110E

6-48VDC

8 mm std range

unshielded (PNP)

2-metre cable

E57LAL18T111E

E57LBL18T111E

6-48VDC

12 mm ext range

semi-shielded (NPN)

2-metre cable

E57-18LE12-C

E57-18LE12-C1

6-48VDC

12 mm ext range

semi-shielded (PNP)

2-metre cable

E57-18LE12-B

E57-18LE12-B1

E57-18LE20-C

E57-18LE20-C1

6-48VDC

20 mm ext range

non-embeddable (NPN)

2-metre cable

6-48VDC

20 mm ext range

non-embeddable (PNP)

2-metre cable

E57-18LE20-B

E57-18LE20-B1

6-48VDC

10 mm std range

shielded (NPN)

2-metre cable

E57LAL30T110

E57LBL30T110

6-48VDC

10 mm std range

shielded (PNP)

2-metre cable

E57LAL30T111

E57LBL30T111

6-48VDC

15 mm std range

unshielded (NPN)

2-metre cable

E57LAL30T110E

E57LBL30T110E

6-48VDC

15 mm std range

unshielded (PNP)

2-metre cable

E57LAL30T111E

E57LBL30T111E

6-48VDC

22 mm ext range

semi-shielded (NPN)

2-metre cable

E57-30LE22-C

E57-30LE22-C1

6-48VDC

22 mm ext range

semi-shielded (PNP)

2-metre cable

E57-30LE22-B

E57-30LE22-B1

AccessoriesB51
Description

Item No.

8mm mounting bracket

E57KM8

12mm mounting bracket

E57KM12

18mm mounting bracket

E57KM18

30mm mounting bracket

E57KM30

* For Plug-in cables, refer to page 364.

318

eaton corporation New Zealand Product Guide

Power Control
Automation & Control

Eaton Premium+ Series Short Barrel Inductive Proximity Sensors
•	 Manufactured to take physical & environmental abuse
•	 Premium+ are designed with stainless steel barrel & impact-absorbing new potting compound
for robust, high temperature, high pressure washdown, as well as intense shock & vibration applications
•	 Premium+ unmatched high noise immunity eliminates problems associated with electrical noise
(all models > 20V/metre)
•	 Premium+ 360° output status indicator is visible from any angle & in any light condition
•	 Resettable short circuit protection in AC/DC & DC models
•	 Reverse polarity protection in 3-wire DC versions
•	 Small size to fit in tight spaces
•	 Choice of cable for low cost wiring, or micro-connector for quick installation and/or replacement
•	 Cable models include an extra long 5-metre cable as standard

2-Wire sensors
Model selection
12 mm diameter
end sensing

18 mm diameter
end sensing

30 mm diameter
end sensing

B51
Operating voltage

Sensing range

Shielding

Overall Length

Connection type

Item No.
N/O output

Item No.
N/C output

20 – 250V AC

2 mm

Shielded

51.7

2-metre Cable

E57SAL12A4

E57SBL12A4

20 – 250V AC

4 mm

Unshielded

51.7

2-metre Cable

E57SAL12A4E

E57SBL12A4E

20 – 250V AC/DC

2 mm

Shielded

62.4

2-metre Cable

E57SAL12A2

E57SBL12A2

20 – 250V AC/DC

4 mm

Unshielded

62.4

2-metre Cable

E57SAL12A2E

E57SBL12A2E

20 – 250V AC

5 mm

Shielded

35.4

2-metre Cable

E57SAL18A4

E57SBL18A4

20 – 250V AC

8 mm

Unshielded

35.4

2-metre Cable

E57SAL18A4E

-

20 – 250V AC/DC

5 mm

Shielded

64.5

2-metre Cable

E57SAL18A2

E57SBL18A2

20 – 250V AC/DC

8 mm

Unshielded

64.5

2-metre Cable

E57SAL18A2E

E57SBL18A2E

20 – 250V AC

10 mm

Shielded

40.2

2-metre Cable

E57SAL30A4

-

20 – 250V AC

15 mm

Unshielded

44.9

2-metre Cable

E57SAL30A4E

-

20 – 250V AC/DC

10 mm

Shielded

69.3

2-metre Cable

E57SAL30A2

E57SBL30A2

20 – 250V AC/DC

15 mm

Unshielded

69.3

2-metre Cable

E57SAL30A2E

E57SBL30A2E

Connection type

Item No.
N/O output

Item No.
N/C output

3-Wire sensors
Model selection
12 mm diameter end
sensing

18 mm diameter end
sensing

30 mm diameter end
sensing

Automation & Control

General purpose Inductive Proximity Sensors

B51
Operating voltage

Sensing range

Shielding

Overall Length

6 – 48V DC

2 mm

Shielded (NPN)

35.2

2-metre Cable

E57SAL12T110

-

6 – 48V DC

2 mm

Shielded (PNP)

35.2

2-metre Cable

E57SAL12T111

E57SBLT111

6 – 48V DC

4 mm

Unshielded (NPN)

35.2

2-metre Cable

E57SAL12T110E

E57SBL12T110E

6 – 48V DC

4 mm

Unshielded (PNP)

35.2

2-metre Cable

E57SAL12T111E

E57SBL12T111E

6 – 48V DC

5 mm

Shielded (NPN)

35.4

2-metre Cable

E57SAL18T110

E57SBL18T110

6 – 48V DC

5 mm

Shielded (PNP)

35.4

2-metre Cable

E57SAL18T111

E57SBL18T111

6 – 48V DC

8 mm

Unshielded (NPN)

35.4

2-metre Cable

E57SAL18T110E

E57SBL18T110E

6 – 48V DC

8 mm

Unshielded (PNP)

35.4

2-metre Cable

E57SAL18T111E

E57SBL18T111E

6 – 48V DC

10 mm

Shielded (NPN)

40.2

2-metre Cable

E57SAL30T110

-

6 – 48V DC

10 mm

Shielded (PNP)

40.2

2-metre Cable

E57SAL30T111

E57SBL30T111

6 – 48V DC

15 mm

Unshielded (NPN)

44.9

2-metre Cable

E57SAL30T110E

E57SBL30T110E

6 – 48V DC

15 mm

Unshielded (PNP)

44.9

2-metre Cable

E57SAL30T111E

-

eaton corporation New Zealand Product Guide

319

Power Control
Automation & Control
General purpose Inductive Proximity Sensors
Eaton High Current Output Inductive Proximity Sensors
•	 Solid-state output can handle up to 12A continuous
•	 Ideal for vehicle use to replace mechanical limit switches, typically required to handle high currents
•	 Wide voltage & temperature range covers most vehicle power supplies & operating environments
•	 Normally Open & Normally Closed isolated outputs
•	 SJO cable is available in custom lengths

4-Wire sensors
Automation & Control

Model selection

30 mm diameter
end sensing

B51

Operating voltage

10 – 55V DC

Sensing range

Shielding

Connection type

Output type

Output Rating

Item No.

Continuous

<100 mS Pulse
20A

10 mm

Shielded

2-Metre Cable

N.O. & N.C. (PNP)

3.5A

E57-30JS10-H

6-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Shielding

Connection type

Output type

Output Rating

Item No.

Continuous

<100 mS Pulse

30 mm diameter
end sensing

10 – 30V DC

10 mm

Shielded

2-Metre Cable

N.O. & N.O.,
or N.C. & N.C.
(NPN or PNP)

8A

50A

E57-30HS10-K

For additional cable length other than 2-metre, add desired length in metres to listed Item number. Example: For an E57-30JS10-H with a 5 metre cable, order E57-30JS10-H5.

Eaton Small Diameter Inductive Proximity Sensors
•	
•	
•	
•	
•	

Small 4, 5, 6.5 & 8 mm diameters for use in applications with limited space for mounting sensors
Stainless steel housings
All models include an LED indicator to show output status
Short circuit & reverse polarity protection
Rated NEMA 4, 4X, 6, 6P, 12 & 13 (IP67) for high resistance to environmental factors

3-Wire sensors
Model selection

Operating voltage

Sensing range

Shielding

Connection type

4 mm Diameter
(Unthreaded)

10 – 30V DC

0.8 mm

Shielded (NPN)

2-metre Cable

E57EAL4T110SP

N/C output
Item No.
—

10 – 30V DC

0.8 mm

Shielded (PNP)

2-metre Cable

E57EAL4T111SP

—

5 mm Diameter

10 – 30V DC

0.8 mm

Shielded (NPN)

2-metre Cable

E57EAL5T110SP

—

10 – 30V DC

0.8 mm

Shielded (PNP)

2-metre Cable

E57EAL5T111SP

—

6.5 mm Diameter
(Unthreaded)

10 – 30V DC

1 mm

Shielded (NPN)

2-metre Cable

E57EAL6T110SP

—

10 – 30V DC

1 mm

Shielded (PNP)

2-metre Cable

E57EAL6T111SP

—

8 mm Diameter

320

B51
N/O output
Item No.

10 – 30V DC

2 mm

Unshielded (NPN)

2-metre Cable

E57EAL6T110EP

—

10 – 30V DC

2 mm

Unshielded (PNP)

2-metre Cable

E57EAL6T111EP

—

10 – 30V DC

1 mm

Shielded (NPN)

2-metre Cable

E57EAL8T110SP

E57EBL8T110SP

10 – 30V DC

1 mm

Shielded (PNP)

2-metre Cable

E57EAL8T111SP

E57EBL8T111SP

10 – 30V DC

2 mm

Unshielded (NPN)

2-metre Cable

E57EAL8T110EP

E57EBL8T110EP

10 – 30V DC

2 mm

Unshielded (PNP)

2-metre Cable

E57EAL8T111EP

E57EBL8T111EP

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
General purpose Inductive Proximity Sensors

Tiny R12 Models Are
Available in Two Frequencies
for Use Close Together
Bright LED on All Sensors
Indicates Output Status

Choose from
Cable or
Connector
Wiring on
R18 Models

PBT Composite
Housings Withstand
Corrosive Solutions

3-Wire sensors
Model selection

B51
Operating voltage

Sensing range

Shielding

Connection type

Item No.
N/O output

R12 Side Sensing

12 – 24V DC

3 mm

Shielded (PNP)

1-metre cable

E52RAL12T111

Q16 End Sensing

12 – 30V DC

5 mm

Shielded (PNP)

2-metre cable

E52-16QS04-B

R18 Side Sensing

10 – 30V DC

4 mm

Unshielded (PNP)

2-metre cable

E52-18RU04-B

Q25 End Sensing

10 – 30V DC

10 mm

Shielded (PNP)

2-metre cable

E52-25QS10-B

Automation & Control

Eaton E52 Rectangular Inductive Proximity Sensors
•	 Small, low-profile design for use in space restrictive applications
•	 3-wire DC operation
•	 Sensitivity adjustment
•	 Choose from a variety of sizes & side or end sensing configuration
•	 Output indicator included on all models
•	 Epoxy filled cavities stops fluids from contacting any electrical component
•	 Convenient mounting holes integrated into each sensor housing

Rhomberg Proximity Switches - Inductive
•	
•	
•	
•	
•	

Inductive (Metal) Sensing
Black Cap, Cables & LED Colour Coded For Type
Moulded 2m Colour Coded Cable with Fishtail - Rated To IP67
Normally Open (NO) Has Red LED, Normally Closed (NC) Has Green LED
Interchangeable with other makes

Rhomberg Inductive Prox 2 Wire AC
•	
•	
•	

20-250Vac, 50/60Hz
Series & parallel connection compatible
400mA Max. Load Current

B57
Description

Item No.

M12 Dia. 2mm Sensing Distance Shielded AC 2 Wire

RI11202F**

M12 Dia. 4mm Sensing Distance Unshielded AC 2 Wire

RI11204S**

M18 Dia. 5mm Sensing Distance Shielded AC 2 Wire

RI11805F**

M18 Dia. 8mm Sensing Distance Unshielded AC 2 Wire

RI11808S**

M30 Dia. 10mm Sensing Distance Shielded AC 2 Wire

RI13010F**

M30 Dia. 15mm Sensing Distance Unshielded AC 2 Wire

RI13015S**

M40 Dia. 20mm Sensing Distance Shielded AC 2 Wire

RI14020F**

M40 Dia. 25mm Sensing Distance Unshielded AC 2 Wire

RI14025S**

6M Lead, for plug-in sensor, straight type

RRK44T6

6M Lead, for plug-in sensor, right angle type

RRK44T6W

Add “MTP” for sensors with plug instead of 2m standard cable & request pricing.
** Specify NO or NC.

eaton corporation New Zealand Product Guide

321

Power Control
Automation & Control
General purpose Inductive Proximity Sensors
Rhomberg Inductive Prox 3 or 4 Wire PNP & NPN DC
•	 PNP - 3 or 4 Wire Yellow Cable, NPN - 3 or 4 Wire Green Cable
•	 10-60Vdc
•	 Reverse Polarity & Short Circuit Protected
•	 400mA Max Load Current

Automation & Control

B57
Description

Item No.

M12 Dia.. 2mm Sensing Distance Shielded 3 Wire

RI*1202F**

M12 Dia.. 4mm Sensing Distance Unshielded 3 Wire

RI*1204S**

M18 Dia. 5mm Sensing Distance Shielded 3 Wire

RI*1805F**

M18 Dia. 5mm Sensing Distance Shielded 4 Wire

RI*1805FNX

M18 Dia. 8mm Sensing Distance Unshielded 3 Wire

RI*1808S**

M18 Dia. 8mm Sensing Distance Unshielded 4 Wire

RI*1808SNX

M30 Dia. 10mm Sensing Distance Shielded 3 Wire

RI*3010F**

M30 Dia. 10mm Sensing Distance Shielded 4 Wire

RI*3010FNX

M30 Dia. 15mm Sensing Distance Unshielded 3 Wire

RI*3015S**

M30 Dia. 15mm Sensing Distance Unshielded 4 Wire

RI*3015SNX

M40 Dia. 20mm Sensing Distance Shielded 3 Wire

RI*4020F**

M40 Dia. 20mm Sensing Distance Shielded 4 Wire

RI*4020FNX

M40 Dia. 25mm Sensing Distance Unshielded 3 Wire

RI*4025S**

M40 Dia. 25mm Sensing Distance Unshielded 4 Wire

RI*4025SNX

6M Lead, for plug-in sensor, straight type

RRK44T6

6M Lead, for plug-in sensor, right angle type

RRK44T6W

Add “MTP” for sensors with plug instead of 2m standard cable & request pricing.
* Specify 4 for PNP or 5 for NPN 	
** Specify NO or NC
NX = 4 wire NO & NC

Rhomberg Inductive Prox NAMUR 2 Wire
•	 2 Wire (Blue Cable)
•	 Designed To DIN 19234
•	 Interfaces with Rhomberg SC320 or SC300 Relay

B57
Description

Item No.

M12 Dia. 2mm Sensing Distance Shielded

RI01202FNC

M12 Dia. 4mm Sensing Distance Unshielded

RI01204SNC

M18 Dia. 5mm Sensing Distance Shielded

RI01805FNC

M18 Dia. 8mm Sensing Distance Unshielded

RI01808SNC

M30 Dia. 10mm Sensing Distance Shielded

RI03010FNC

M30 Dia. 15mm Sensing Distance Unshielded

RI03015SNC

M40 Dia. 20mm Sensing Distance Shielded

RI04020FNC

M40 Dia. 25mm Sensing Distance Unshielded

RI04025SNC

Switching Amplifier/Relay For NAMUR Sensors Plug In

SC300/*-SP

Control Relay For Rhomberg Photo Electric Sensors Plug In

SC410/*-SP

11 Pin DIN Rail Base

S3B

Add “-MTP” for sensors with plug instead of cable & request pricing.
* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.

322

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
General purpose Inductive Proximity Sensors
Rhomberg Inductive Prox Can-Line
•	 Plastic Rectangular Body
•	 DC PNP, NPN or NAMUR
•	 Can-Line Sensors

Description

Item No.

40 x 26 x 12mm 2mm Sensing Distance

RI02602FNCPBC

40 x 26 x 12mm 4mm Sensing Distance

RI02604SNCPBC

40 x 26 x 12mm 2mm Sensing Distance

RI04002FNCPBC

40 x 26 x 12mm 4mm Sensing Distance

RI04004SNCPBC

40 x 26 x 12mm 2mm Sensing Distance

RI*2602F**PBC

40 x 26 x 12mm 4mm Sensing Distance

RI*2604S**PBC

40 x 26 x 12mm 2mm Sensing Distance

RI*4002F**PBC

40 x 26 x 12mm 4mm Sensing Distance

RI*4004S**PBC

130 x 35 x 35mm 20mm Sensing Distance

RI*9020FNOPBC

Automation & Control

B57

* Specify 4 for PNP or 5 for NPN. 	
** Specify NO or NC.

General purpose Capacitive Proximity Sensors
Eaton E53 Threaded Body Capacitive Proximity Sensors
•	 Detect liquids, powders & other materials that are difficult or impossible with other sensor types
•	 Plastic body is corrosion resistant
•	 Sensitivity adjustment
•	 Output indicator LED

2-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Shielding

Connection type

N/O output
Item No.

18 mm diameter
end sensing

20 – 250V AC

8 mm

Shielded

2-metre Cable

E53KAL18A2

30 mm diameter
end sensing

N/C output
Item No.
E53KBL18A2

20 – 250V AC

15 mm

Unshielded

2-metre Cable

E53KAL18A2E

E53KBL18A2E

20 – 250V AC

20 mm

Shielded

2-metre Cable

E53KAL30A2

E53KBL30A2

20 – 250V AC

25 mm

Unshielded

2-metre Cable

E53KAL30A2E

E53KBL30A2E

N/O output
Item No.

N/C output
Item No.

3-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Shielding

Connection type

18 mm diameter end
sensing

10 – 35V DC

8 mm

Shielded (NPN)

2-metre Cable

E53KAL18T110

E53KBL18T110

10 – 35V DC

8 mm

Shielded (PNP)

2-metre Cable

E53KAL18T111

E53KBL18T111

30 mm diameter end
sensing

10 – 35V DC

15 mm

Unshielded (NPN)

2-metre Cable

E53KAL18T110E

E53KBL18T110E

10 – 35V DC

15 mm

Unshielded (PNP)

2-metre Cable

E53KAL18T111E

E53KBL18T111E

10 – 35V DC

20 mm

Shielded (NPN)

2-metre Cable

E53KAL30T110

E53KBL30T110

10 – 35V DC

20 mm

Shielded (PNP)

2-metre Cable

E53KAL30T111

E53KBL30T111

10 – 35V DC

25 mm

Unshielded (NPN)

2-metre Cable

E53KAL30T110E

E53KBL30T110E

10 – 35V DC

25 mm

Unshielded (PNP)

2-metre Cable

E53KAL30T111E

E53KBL30T111E

eaton corporation New Zealand Product Guide

323

Power Control
Automation & Control
General purpose Capacitive Proximity Sensors
Rhomberg Proximity Switches - Capacitive
•	 Capacitive (Most Materials) Sensing
•	 Adjustable Sensitivity
•	 White Cap, Cables & LED Colour Coded For Type
•	 Moulded 2m Colour Coded Cable with Fishtail - Rated To IP67
•	 Normally Open (NO) Has Red LED, Normally Closed (Nc) Has Green LED
•	 Interchangeable with other makes
Rhomberg Capacitive Prox 2 Wire AC
20-250Vac, 50/60Hz
•	 Series & parallel connection compatible
•	 400mA Max Load Current

Automation & Control

•	

B57
Description

Item No.

M18 Dia. 5mm Sensing Distance Shielded AC 2 wire

RC11805F**

M18 Dia. 10mm Sensing Distance Unshielded AC 2 wire

RC11810S**

M30 Dia. 10mm Sensing Distance Shielded AC 2 wire

RC13010F**

M30 Dia. 20mm Sensing Distance Unshielded AC 2 wire

RC13020S**

6M Lead, for plug-in sensor, straight type.

RRK44T6

6M Lead, for plug-in sensor, right angle type.

RRK44T6W

Add “MTP” for sensors with plug instead of 2m standard cable & request pricing.
** Specify NO or NC.

Rhomberg Capacitive Prox 3 Wire PNP & NPN DC
•	 PNP - 3 Wire Yellow Cable, NPN - 3 Wire Green Cable
•	 10-60Vdc
•	 Reverse Polarity & Short Circuit Protected
•	 400mA Max Load Current

B57
Description

Item No.

M18 Dia. 5mm Sensing Distance Shielded

RC*1805F**

M18 Dia. 10mm Sensing Distance Unshielded

RC*1810S**

M30 Dia. 10mm Sensing Distance Shielded

RC*3010F**

M30 Dia. 20mm Sensing Distance Unshielded

RC*3020S**

Add “MTP” for sensors with plug instead of 2m standard cable & request pricing.
* Specify 4 for PNP or 5 for NPN.
** Specify NO or NC.

324

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
General purpose Capacitive Proximity Sensors
Rhomberg Capacitive Prox NAMUR 2 Wire
•	 2 Wire (Blue Cable)
•	 Designed To DIN 19234
•	 Interfaces with SC320 or SC300 Relay

Description

Item No.

M30 Dia. 10mm Sensing Distance Shielded

RC03010FNC

M30 Dia. 20mm Sensing Distance Unshielded

RC03020SNC

Switching Amplifier/Relay For NAMUR Sensors Plug In

SC300/*-SP

Control Relay For Rhomberg Photo Electric Sensors Plug In

SC410/*-SP

11 Pin DIN Rail Base

S3B

Automation & Control

B57

Add “-MTP” for sensors with plug instead of 2m standard cable & request pricing.
* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.

Rhomberg Capacitive Prox Plastic Body 1.5” BSP

B57
Description

Item No.

1.5" BSP20mm Sensing Distance NAMUR Type

RC04020SNCPBT

1.5" BSP20mm Sensing Distance AC/DC Type N/O

RCE4020SNOPBT

1.5" BSP20mm Sensing Distance AC/DC Type N/C

RCE4020SNCPBT

1.5" BSP20mm Sensing Distance DC Type NO

RC44020SNOPBT

1.5" BSP20mm Sensing Distance DC Type NC

RC44020SNCPBT

1.5" BSP20mm Sensing Distance DC Type NO

RC54020SNOPBT

1.5" BSP20mm Sensing Distance DC Type NC

RC54020SNCPBT

eaton corporation New Zealand Product Guide

325

Power Control
Automation & Control
Cables for Plug-In Proximity Sensors
Eaton Cable for Plug-In Sensors is available for AC & DC sensors.
Cable comes complete with micro connector fitted.

Extensive Line of
Cost-Effective Products

Automation & Control

Single-Connector
Cables

OEM-Style Cables

Double-Connector
Cables

Single-Connector
Micro-Connector
Cables

Multi-Connector Blocks

AC Micro Connector Cable

B51

Connector

Type

Cable Length

Item No.

.35mm2

3-pin straight female

2m

CSAS3F3CY2202

2

.35mm

3-pin straight female

5m

CSAS3F3CY2205

.35mm2

3-pin straight female

10m

CSAS3F3CY2210

.35mm2

3-pin 90o angle female

2m

CSAR3F3CY2202

.35mm2

3-pin 90o angle female

5m

CSAR3F3CY2205

.35mm2

3-pin 90o angle female

10m

CSAR3F3CY2210

DC Micro Connector Cable*B51
Connector

Type

Cable Length

Item No.

4-pin

3-wire straight female

2m

CSDS4A3CY2202

4-pin

3-wire straight female

5m

CSDS4A3CY2205

4-pin

3-wire straight female

10m

CSDS4A3CY2210

4-pin

4-wire straight female

2m

CSDS4A4CY2202

4-pin

4-wire straight female

5m

CSDS4A4CY2205

4-pin

4-wire straight female

10m

CSDS4A4CY2210

4-pin

3-wire right angle female

2m

CSDR4A3CY2202

4-pin

3-wire right angle female

5m

CSDR4A3CY2205

4-pin

3-wire right angle female

10m

CSDR4A3CY2210

4-pin

4-wire right angle female

2m

CSDR4A4CY2202

4-pin

4-wire right angle female

5m

CSDR4A4CY2205

4-pin

4-wire right angle female

10m

CSDR4A4CY2210

*For DC connector, NO (normally open) sensors require 4-pin 3-wire cable & NC (normally closed) sensors require 4-pin 4-wire cable.

326

eaton corporation New Zealand Product Guide

Power Control
Automation & Control

Eaton Prism Series Photoelectric Sensors
•	 Small size for use in a wide variety of applications & locations
•	 High sensing power for longer ranges & resistance to dust & dirt
•	 Adjustable gain control to ensure peak optical performance
•	 High noise immunity greatly reduces problems associated with electrical noise
•	 AC/DC models which allow you to order & stock one model for both voltages
•	 DC only models which offer lower cost options in all sensing modes
•	 Isolated outputs for wiring flexibility
•	 Short circuit protection
•	 Quick 3mS response time on all models
•	 Highly visible output status LED

3-Wire & 4-Wire sensors

B51

Model selection

Operating voltage

Type

Sensing range

Field of view

Through beam part

Thru-Beam
Forward Viewing

20 – 132V AC
or 15 – 30V DC

-

6m

0.5 m diameter
at 3 metres

Source
Detector

10 – 30V DC

-

0.5 m diameter
at 3 metres

Source
Detector

Reflex-Forward
Viewing
Retroreflector
(not included)
For complete system,
order Sensor and
Retroreflector

Diffuse Reflective
Forward Viewing

6m

Light Operate Item No.

Dark Operate Item No.

11155AA14

11155AA14

12155AL10

12155AD10

11155AA17

11155AA17

12155AL10

12155AD10

20 – 132V AC

Standard
Reflex

4.5m

76 mm diameter
at 3.6 metres

-

14150AL14

14150AD14

20 – 132V AC
or 15 – 30V DC

Polarized
Reflex

3m

76 mm diameter
at 3.6 metres

-

14151AL14

14151AD14

10 – 30V DC

Standard
Reflex

4.5m

76 mm diameter
at 3.6 metres

-

14150AL17

14150AD17

10 – 30V DC

Polarized
Reflex

3m

76 mm diameter
at 3.6 metres

-

14151AL17

14151AD17

20 – 132V AC
or 15 – 30V DC

-

200 mm

15 mm diameter
at 127 mm

-

13150AL14

13150AD14

10 – 30V DC

-

200 mm

15 mm diameter
at 127 mm

-

13150AL17

13150AD17

Automation & Control

Photoelectric Sensors

Connection type : 2m Cable.

eaton corporation New Zealand Product Guide

327

Power Control
Automation & Control

Automation & Control

Photoelectric Sensors
Eaton E58 Harsh Duty Series Photoelectric Sensors
•	 E58 Sensors are available in 18 mm & 30 mm diameters
•	 Highly refined optics for long sensing ranges & to see through high levels
of contamination — unmatched optical performance
•	 Perfect Prox® technology provides exceptional background rejection
& extremely high excess gain
•	 Resistant to the wide range of chemicals used in the automotive,
food processing & forest products industries
•	 Suitable for high temperature, high pressure washdown (1200 psi)
•	 Mechanical Viton seals hold up to extreme temperature variations
•	 Visible sensing beam on all models lets you see where the beam is aimed
for quick setup & alignment
•	 Output status indicator is the brightest available & is visible from any angle
& in any lighting condition
•	 The industry’s only background rejection sensors with a 2-wire circuit design
•	 Models available with both AC & DC operation in a single unit
•	 4-wire DC sensors offer dual NPN & PNP outputs

3-Wire & 4-Wire sensors

B51
Item No.
Light Operate

Item No.
Dark Operate

Model selection

Operating voltage

Sensing range

Field of view

Through beam part

30 mm Diameter

20 – 132V AC

250 m

830 mm diameter

Source

E58-30TS250-GA

E58-30TS250-GA

Through-Beam

or 15 – 30V DC

-

at 7.6 metres

Detector

E58-30TD250-GL

E58-30TD250-GD

30 mm Diameter
Reflex

20 – 132V AC
or 15 – 30V DC

18 m

150 mm diameter
at 6 metres

-

E58-30RS18-GL*

E58-30RS18-GD*

30 mm Diameter
Polarized Reflex

20 – 132V AC
or 15 – 30V DC

10 m

150 mm diameter
at 6 metres

-

E58-30RP10-GL*

E58-30RP10-GD*

Item No.
Dark Operate

* Retroreflector not included.
Connection type: 2 metre Cable

2-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Field of view

Through beam part

Item No.
Light Operate

18 mm Diameter
Perfect Prox®

90 – 132V AC
or 18 – 50V DC

50 mm

6 mm diameter
at 50 mm

-

E58-18DP50-EL

E58-18DP50-ED

90 – 132V AC
or 18 – 50V DC

100 mm

10 mm diameter
at 100 mm

-

E58-18DP100-EL

E58-18DP100-ED

90 – 132V AC
or 18 – 50V DC

150 mm

19 mm diameter
at 150 mm

-

E58-30DP150-EL

E58-30DP150-ED

90 – 132V AC
or 18 – 50V DC

280 mm

26 mm diameter
at 280 mm

-

E58-30DPS280-EL

E58-30DPS280-ED

Item No.
Dark Operate

30 mm Diameter
Perfect Prox®

Connection type: 2 metre Cable

3-Wire & 4-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Field of view

Through beam part

Item No.
Light Operate

18 mm Diameter
Perfect Prox®

10 – 30V DC

50 mm

6 mm diameter
at 50 mm

-

E58-18DP50-HL

E58-18DP50-HD

10 – 30V DC

100 mm

10 mm diameter
at 100 mm

-

E58-18DP100-HL

E58-18DP100-HD

20 – 132V AC
or 15 – 30V DC

150 mm

19 mm diameter
at 150 mm

-

E58-30DP150-GL

E58-30DP150-GD

20 – 132V AC
or 15 – 30V DC

280 mm

26 mm diameter
at 280 mm

-

E58-30DPS280-GL

E58-30DPS280-GD

30 mm Diameter
Perfect Prox®

Connection type: 2 metre Cable

328

eaton corporation New Zealand Product Guide

Power Control
Automation & Control

Eaton E64 Terminal Base Series Photoelectric Sensors
•	 Universal voltage operation — 16 to 240V AC or DC
•	 SPST relay output handles up to 1A AC & 2A DC
•	 Screw-terminal connections with 1/2 inch NPT conduit entry
•	 Output & stability indicators
•	 PLC compatible output
•	 Sensitivity adjustment
•	 Selectable light or dark operation
•	 Mounting brackets & retroreflector (for polarised reflex models) included
•	 Rugged ABS housing rated NEMA 1, 3, 4, 12 & 13 (IP66)
•	 Polarised reflex models allow reliable detection of shiny targets that could reflect light back to the sensor
& falsely trigger a non-polarised sensor
•	 Time delay models can be set for normal operation, on-delay, off-delay, on/off-delay, or one-shot delay,
with adjustable timing range from 0.6 to 16 sec.

3-Wire & 4-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Field of view

Light Source

With time delay

Item No.

Thru-Beam
Source

16-240VAC/DC

50 m

750 mm diameter
at 10 metres

Infrared

-

E64CAL4T

Thru-Beam
Detector

16-240VAC/DC

50 m

750 mm diameter
at 10 metres

-

Yes

E64CAT3T 

Polarized Reflex

16-240VAC/DC

0.15 – 3.5 m

125 mm diameter at 0.5 m

Visible Red

Yes

E64CAT5T 

Diffuse Reflective

16-240VAC/DC

2m

20 mm diameter
at 0.5 m

Infrared

Yes

E64CAT2T




Automation & Control

Photoelectric Sensors

For a complete system, order one Source & one Detector.
Retroreflector included in Polarized Reflex sensors.

eaton corporation New Zealand Product Guide

329

Power Control
Automation & Control
Photoelectric Sensors
Eaton E65 Miniature Series Photoelectric Sensors
•	
•	
•	
•	
•	
•	
•	

10 – 30V DC operation
Output & stability indicators
NPN or PNP selectable by wiring
Light or dark operation selectable by wiring
Sensitivity adjustment for fine tuning the sensor in your application
All sensors include an adjustable mounting bracket for easy installation & alignment
All sensors built with 2 metre cable for ease of use

Automation & Control

B51
Model selection

Operating voltage

Sensing range

Sensing beam

Forward viewing Item No.

Right angle viewing Item No.

Thru-Beam Source

10 – 30V DC

5m

Infrared

E65CBL4

E65VBL4

Thru-Beam Detector

10 – 30V DC

5m

-

E65CBL3 

E65VBL3 

Polarised Reflex

10 – 30V DC

0.1 – 1.8 m

Visible Red

E65CBL5

E65VBL5

Clear Object Sensors

10 – 30V DC

0.2 – 0.6 m

Infrared

-

E65VBL1C 

Diffuse Reflective Short Range

10 – 30V DC

100 mm

Infrared

E65CBL2

E65VBL2

Diffuse Reflective Long Range

10 – 30V DC

500 mm

Infrared

E65CBL2N

E65VBL2N

Diffuse Reflective Fixed Focus

10 – 30V DC

12 mm

Visible Red

E65CBL6

-

Fiber Optic

10 – 30V DC

Thru-beam mode:
11 cm, diffuse reflective, mode:
3.3 cm

Visible Red

E65CBL7R

-

Connection type: 2 metre Cable.
 For a complete system, order one Source & one Detector.
 Retroreflector included in Polarised Reflex & Clear Object sensors.

Eaton SM Series Photoelectric Sensors
•	
•	
•	
•	
•	
•	
•	
•	

Highly visible LED indicators for power, output & TargetLock™
TargetLock™ simplifies setup & ensures the sensor operates at the highest level of reliability possible
Perfect Prox® models sense different coloured targets at the same range & ignore objects in the background
AC/DC models operate on either 18 – 264V AC or 18 – 50V DC
DC-only models feature both NPN & PNP outputs
Visible beam on all models let you see exactly where the sensor is pointing
Reverse polarity, overload & short circuit protection
Full family includes thru-beam, polarised reflex, diffuse reflective & Perfect Prox® background rejection

3-Wire & 4-Wire sensors

B51

Model selection

Operating voltage

Sensing range

Thru-Beam

10 – 30V DC

15m

Polarised Reflex

Diffuse Reflective

Perfect Prox®

Through beam part

Item No.
Light Operate

Item No.
Dark Operate

254 mm diameter

Source

E65-SMTS15-HA

E65-SMTS15-HA

at 3 metres

Detector

E65-SMTD15-HL

E65-SMTD15-HD

18 – 264V AC,
or 18 – 50V DC

3m

25 mm diameter, at 1.3
metres

-

E65-SMPR3-GL

E65-SMPR3-GD

10 – 30V DC

3m

25 mm diameter, at 1.3
metres

-

E65-SMPR3-HL

E65-SMPR3-HD

18 – 264V AC, or 18 –
50V DC

200 mm

50 mm diameter, at
127 mm

-

E65-SMSD200-GL

E65-SMSD200-GD

10 – 30V DC

200 mm

50 mm diameter, at
127 mm

-

E65-SMSD200-HL

E65-SMSD200-HD

18 – 264V AC, or 18 –
50V DC

50 mm

6 mm diameter, at 57 mm

-

E65-SMPP050-GL

E65-SMPP050-GD

-

100 mm

9 mm diameter, at 127 mm

-

E65-SMPP100-GL

E65-SMPP100-GD

10 – 30V DC

50 mm

6 mm diameter, at 57 mm

-

E65-SMPP050-HL

E65-SMPP050-HD

-

100 mm

9 mm diameter, at 127 mm

-

E65-SMPP100-HL

E65-SMPP100-HD

Connection type: 2 metre Cable.

330

Field of view

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
Photoelectric Sensors
Eaton E51 Assembled Photoelectric Sensors - in reflex, diffuse reflective & thru-beam versions,
complete with head, body & receptacle. For complete thru-beam system, order one source & one detector.

Max. Range

Voltage

Circuit

Wires

Item No.

standard P*

5.5m

20-264Vac/dc

NO or NC

2

E51ALP1

standard

5.5m

120Vac

NO + NC

3

E51CLP1

standard, logic**

5.5m

120Vac

NO + NC

3

E51CNP1

standard, NPN

5.5m

10-30Vdc

NO + NC

3

E51NLP1

standard, PNP

5.5m

10-30Vdc

NO + NC

3

E51PLP1

fast response

5.5m

120Vac

NO + NC

3

E51CLP11

fast resp, logic**

5.5m

120Vac

NO + NC

3

E51CNP11

fast response, NPN

5.5m

10-30Vdc

NO + NC

3

E51NLP11

fast response, PNP

5.5m

10-30Vdc

NO + NC

3

E51PLP11

extended range

10.7m

120Vac

NO + NC

3

E51CLP3

ext range, logic**

10.7m

120Vac

NO + NC

3

E51CNP3

ext range, NPN

10.7m

10-30Vdc

NO + NC

3

E51NLP3

ext range, PNP

10.7m

10-30Vdc

NO + NC

3

E51PLP3

polarised lens

4.6m

120Vac

NO + NC

3

E51CLP5

pol lens, logic**

4.6m

120Vac

NO + NC

3

E51CNP5

pol lens, NPN

4.6m

10-30Vdc

NO + NC

3

E51NLP5

pol lens, PNP

4.6m

10-30Vdc

NO + NC

3

E51PLP5

std. P*

200mm

20-264Vac/dc

NO or NC

2

E51ALP2

standard

200mm

120Vac

NO + NC

3

E51CLP2

standard, logic**

200mm

120Vac

NO + NC

3

E51CNP2

standard, NPN

200mm

10-30Vdc

NO + NC

3

E51NLP2

standard,PNP

200mm

10-30Vdc

NO + NC

3

E51PLP2

fast response

200mm

120Vac

NO + NC

3

E51CLP22

fast resp, logic**

200mm

120Vac

NO + NC

3

E51CNP22

fast response, NPN

200mm

10-30Vdc

NO + NC

3

E51NLP22

fast response, PNP

200mm

10-30Vdc

NO + NC

3

E51PLP22

high gain

450mm

120Vac

NO + NC

3

E51CLP6

high gain, logic**

450mm

120Vac

NO + NC

3

E51CNP6

high gain, NPN

450mm

10-30Vdc

NO + NC

3

E51NLP6

high gain, PNP

450mm

10-30Vdc

NO + NC

3

E51PLP6

extended range

1m

120Vac

NO + NC

3

E51CLP4

ext range, logic**

1m

120Vac

NO + NC

3

E51CNP4

ext range , NPN

1m

10-30Vdc

NO + NC

3

E51NLP4

ext range, PNP

1m

10-30Vdc

NO + NC

3

E51PLP4

for thru-beam P*

90m

20-264Vac/dc

NO or NC

2

E51ALC1

for thru-beam

90m

120Vac

NO + NC

3

E51CLC1

for thru-beam, logic**

90m

120Vac

NO + NC

3

E51CNC1

for thru-beam,NPN

90m

10-30Vdc

NO + NC

3

E51NLC1

for thru-beam,PNP

90m

10-30Vdc

NO + NC

3

E51PLC1

24Vac source for thru-beam

-

-

-

-

-

E51ELA24

240Vac source for thru-beam

-

-

-

-

-

E51ELA40

10-30Vdc source for thru beam

-

-

-

-

-

E51EDN

Description
Reflex

Diffuse Reflective

Detector

Automation & Control

B51

*P = programmable.
**Will accept logic modules.

eaton corporation New Zealand Product Guide

331

Power Control
Automation & Control
Photoelectric Sensors
Eaton Comet Thru-Beam Photoelectric Sensors - are available in a variety of sources & detectors
to sense objects as small as 6.5mm diameter. For complete system, order 1 source & 1 detector.

Sensitivity adjustment

15:1

Light source for 6m range

infrared LED

Light source for 24m range

visible red LED

Sensor = source + detector

Automation & Control

SourceB51
Voltage

Max. Range

Optimum Range

20-264Vac
50/60Hz

refer
detector

refer
detector

or 15-30Vdc

10-30Vdc

refer
detector

refer
detector

Viewing

Connector

Item No.

forward

2m cable

11100A6513

right angle

2m cable

11100R6513

forward

micro

11100AQD03

right angle

micro

11100RQD03

forward

2m cable

11100A6517

right angle

2m cable

11100R6517

forward

micro

11100AQD07

right angle

micro

11100RQD07

DetectorB51
Voltage

Max. Range

Optimum Range

Viewing

Connector

Item No.

20-264Vac
50/60Hz
or 15-30Vdc (NPN)

6m

30mm - 3m

forward

2m cable

12100A6513

10-30Vdc
(NPN, PNP)

6m

30mm - 3m

right angle

2m cable

12100R6513

6m

30mm - 3m

forward

micro

12100AQD03

6m

30mm - 3m

right angle

micro

12100RQD03

24m

30mm - 12m

forward

2m cable

12102A6513

24m

30mm - 12m

forward

micro

12102AQD03

6m

30mm - 3m

forward

2m cable

12100A6517

6m

30mm - 3m

right angle

2m cable

12100R6517

6m

30mm - 3m

forward

micro

12100AQD07

6m

30mm - 3m

right angle

micro

12100RQD07

24m

30mm - 12m

forward

2m cable

12102A6517

24m

30mm - 12m

forward

micro

12102AQD07

* For Plug in Cables, refer to page 364.

332

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
Photoelectric Sensors
Eaton Comet Reflex Photoelectric Sensors - High performance sensor housed in industry standard 18mm tubular body.
Comes with two mounting nuts for quick installation.

Sensitivity adjustment

15:1

Output indicator LED

lights when output is “on”

Complete Unit = Sensor + Retroreflector

Voltage

Beam

Max/Optimum Range

Viewing

Connect

Item No.

20-264Vac
50/60Hz

visible red

7.5m/30mm - 4.5m

forward

cable

14102A6513

or 15-30Vdc(NPN)

10-30Vdc
(NPN, PNP)

visible red

4.5m/30mm - 3m

right angle

cable

14102R6513

visible red

7.5m/30mm - 4.5m

forward

micro

14102AQD03

visible red

4.5m/30mm - 3m

right angle

micro

14102RQD03

invisible/infrared

7.5m/30mm - 4.5m

forward

cable

14100A6513

invisible/infrared

7.5m/30mm - 4.5m

forward

micro

14100AQD03

polarised vis. red

4.5m/30mm - 3m

forward

cable

14101A6513

polarised vis. red

4.5m/30mm - 3m

right angle

cable

14101R6513

polarised vis. red

3m/30mm - 1.5m

forward

micro

14101AQD03

polarised vis. red

3m/30mm - 1.5m

right angle

micro

14101RQD03

visible red

7.5m/30mm - 4.5m

forward

cable

14102A6517

visible red

4.5m/30mm - 3m

right angle

cable

14102R6517

visible red

7.5m/30mm - 4.5m

forward

micro

14102AQD07

visible red

4.5m/30mm - 3m

right angle

micro

14102RQD07

invisible/infrared

7.5m/30mm - 4.5m

forward

cable

14100A6517

invisible/infrared

7.5m/30mm - 4.5m

forward

micro

14100AQD07

polarised vis. red

4.5m/30mm - 3m

forward

cable

14101A6517

polarised vis. red

3m/30mm - 1.5m

right angle

cable

14101R6517

polarised vis. red

4.5m/30mm - 1.5m

forward

micro

14101AQD07

polarised vis. red

3m/30mm - 1.5m

right angle

micro

14101RQD07

Automation & Control

SensorB51

RetroreflectorsB51
Description

Item No.

75mm diameter with mounting hole (2 per package)

6200A-6501

75mm diameter with mounting hole (1 per package)

E51KR84

75mm diameter, metal backed, with mounting hole (1 per package)

6200A-6506

75mm wide retro reflective tape, 1 piece

6303A-XXX**

Polarised visible beam red sensors may not operate with retro reflective tape. Test selected tape before installation.
* For Plug in Cables, refer to page 364.
**Replace XXXs in Item number with length in feet of tape required.

eaton corporation New Zealand Product Guide

333

Power Control
Automation & Control
Photoelectric Sensors
Eaton Comet Diffuse Reflective Photoelectric Sensors - High performance sensors housed in industry
standard 18mm tubular body. Come with two mounting nuts for quick installation.

Sensitivity adjustment

15:1

Light source for model 13102

visible red LED

Light source for all other models

infrared LED

Output indicator LED

lights when output is “on”

Automation & Control

B51
Voltage

Max. Range

Optimum Range

Viewing

Connector

Item No.

20-264Vac
50/60Hz

200mm

30mm - 1.5m

forward

2m cable

13106A6513

or 15-30Vdc(NPN)

10-30Vdc
(NPN, PNP)

200mm

30mm - 1.5m

right angle

2m cable

13106R6513

200mm

30mm - 1.5m

forward

micro

13106AQD03

200mm

30mm - 1.5m

right angle

micro

13106RQD03

600mm

30mm - 4.5m

forward

2m cable

13100A6513

600mm

30mm - 4.5m

right angle

2m cable

13100R6513

600mm

30mm - 4.5m

forward

micro

13100AQD03

600mm

30mm - 4.5m

right angle

micro

13100RQD03

200mm

30mm - 1.5m

forward

2m cable

13106A6517

200mm

30mm - 1.5m

right angle

2m cable

13106R6517

200mm

30mm - 1.5m

forward

micro

13106AQD07

200mm

30mm - 1.5m

right angle

micro

13106RQD07

600mm

30mm - 4.5m

forward

2m cable

13100A6517

600mm

30mm - 4.5m

right angle

2m cable

13100R6517

600mm

30mm - 4.5m

forward

micro

13100AQD07

600mm

30mm - 4.5m

right angle

micro

13100RQD07

* For Plug in Cables, refer to page 364.

Sense Your
Power With
CurrentWatch™
High Performance AC & DC Current Sensors

Introducing CurrentWatch™, a complete line of Cutler-Hammer current sensors, switches & ground fault devices from
Eaton’s electrical business.
With models measuring up to 2,000 amps
AC & 300 amps DC, CurrentWatch products
are perfect for providing improved reliability,
predictive diagnostics, feedback & monitoring
for all types of electrical equipment.

Simply run a conductor wire through the
sensing aperture, wire the outputs to your
controller & installation is complete. With
features such as split-core housings that
wrap around existing wires, industry standard
outputs & self-powered models available,
sensing current has never been easier.

For further Information:

0508 328 6669
www.eaton.co.nz

334

eaton corporation New Zealand Product Guide

For more information on Eaton’s full line of
Cutler-Hammer contact & non-contact sensing
solutions including CurrentWatch, just give
our experienced Sensor Application Engineers
a call at 1300 3 EATON.

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches
Eaton EDC Series CurrentWatch Current Sensors
•	 Jumper-Selectable Ranges - Reduces inventory & eliminates zero or span pots
•	 Isolation output is magnetically isolated from the input for safety, also eliminating insertion loss (voltage drop)
•	 Internal Power Regulation. Cuts installation costs & works well, even with unregulated power
•	 Split Core Design & Built-In Mounting Brackets. Makes installation quick & easy
•	 UL & CE Approved, Applications - Battery banks, transportation, electrical heating elements

B51

Power Supply

Aperture Size

Output Signal

Current Range

Item No.

24V AC/DC

0.85 in. (21.6 mm)

0 – 5V DC

50, 75 or 100A

EDC205SP

100, 150 or 200A

EDC305SP

0 – 5V DC
Split-Core Housings
4 – 20 mA

0.75 in. (19 mm)

4 – 20 mA

150, 225 or 300A

EDC405SP

50, 75 or 100A

EDC210SP

100, 150 or 200A

EDC310SP

150, 225 or 300A

EDC410SP

50, 75 or 100A

EDC2420SP

100, 150 or 200A

EDC3420SP

150, 225 or 300A

EDC4420SP

5, 10 or 20A

EDC1420SC

Automation & Control

Top Terminal Current Sensors

Solid-Core Housings

Eaton ECSJ Series CurrentWatch Current Switches
•	 Choice of N.O. or N.C. Solid-State Outputs. 1A @ 240V AC, 0.15A @ 30V DC, 15A @ 120V AC,
3A @ 120V AC, 0.15A @ 30V DC, Dual Contact
•	 Self-Powered - Cuts installation & operating costs
•	 Easily Adjustable Setpoint - Speeds start-up & reduces inventory
•	 Solid or Split-Core Housings - Choose the appropriate version for your application
•	 LED Indication - Provides quick visual indication of output contact status
•	 Built-In Mounting Feet - Provide for a secure installation
•	 UL, C-UL & CE Approved, Applications - Electronic proof of flow, Conveyors, Lighting Circuits,
Fans, Pumps, Heating elements, Critical motors & Ancillary equipment

Front & Top Terminal Switches

B51

Power Supply

Aperture Size

Output Type, Voltage & Rating

Setpoint & LED Configuration

Item No.

Self-Powered
(No External Power needed)

0.55 in. (14 mm)

Normally Open,
1A @ 240V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ400SC

Normally Open,
15A @ 120V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ406SC

Normally Closed,
1A @ 240V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ401SC

Normally Closed,
15A @ 120V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ407SC

Dual Contact, N.O. & N.C.,
0.15A @ 30V DC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ430SC

Normally Open,
0.15A @ 30V DC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ420SC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ424SC

Normally Closed,
0.15A @ 30V DC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ421SC

Normally Open,
3A @ 120V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ404SC

Normally Closed,
3A @ 120V AC

Adjustable 1 – 6, 6 – 40 or
40 – 175A Setpoint with LED

ECSJ405SC

Normally Open,
1A @ 240V AC

Adjustable 1.75 – 6, 6 – 40 or
40 – 200A Setpoint with LED

ECSJ402SP

Normally Closed,
1A @ 240V AC

Adjustable 1.75 – 6, 6 – 40 or
40 – 200A Setpoint with LED

ECSJ403SP

Normally Open,
0.15A @ 30V DC

Adjustable 1.75 – 6, 6 – 40 or
40 – 200A Setpoint with LED

ECSJ422SP

Normally Closed,
0.15A @ 30V DC

Adjustable 1.75 – 6, 6 – 40 or
40 – 200A Setpoint with LED

ECSJ423SP

Solid-Core Housings with Front
Terminals

0.74 in. (19 mm)

SolidCore Housings with Top
Terminals
0.85 in. (21.6 mm)

Split-Core Housings

eaton corporation New Zealand Product Guide

335

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches

Automation & Control

Eaton EGF Series CurrentWatch Current Sensors
•	 Broad Range of Options to Meet Application Needs - N.O. or N.C., solidstate or mechanical relays,
normally energised or normally de-energised contacts
•	 Setpoint Options Maximize Ease-of-Use & Application
•	 Flexibility - Field selectable 5, 10 or 30 mA setpoints on the EGF “Tri-set” models make user
adjustments fast, sure & convenient
•	 Compatible with Standard Equipment - Application on single- & three phases systems, ideal for use
with shunt trip breakers, & magnetically isolated from monitored circuit & control power
•	 Agency Approved - UL & CE Certified, accepted worldwide
•	 Applications - Personnel Protection (Typically 5 mA), Equipment Protection (Typically 10 or 30 mA),
Regulatory requirements.

Solid-State Output Sensors

B51

Power Supply

Setpoint

AC Solid-State Output

DC Solid-State Output

120V AC

Fixed, 50 mA

Solid-State, N.O.,
1A @ 240V AC

—

Solid-State, N.C.,
1A @ 240V AC
—

Fixed, 100 mA

Tri-Set Adjustable,
5, 10 or 30 mA

eaton corporation New Zealand Product Guide

Normally Energised

EGF1NOACNE050
EGF1NOACDE050

—

Normally Energised

EGF1NCACNE050

Normally De-energised

EGF1NCACDE050

Solid-State, N.O.,

Normally Energised

EGF1NODCNE050

Normally De-energised

EGF1NODCDE050

—

Solid-State, N.C.,
0.15A @ 30V DC

Normally Energised

EGF1NCDCNE050

Normally De-energised

EGF1NCDCDE050

Solid-State, N.O.,
1A @ 240V AC

—

Normally Energised

EGF1NOACNE100

Normally De-energised

EGF1NOACDE100

Solid-State, N.C.,
1A @ 240V AC

—

Normally Energised

EGF1NCACNE100

—

Normally De-energised

EGF1NCACDE100

Solid-State, N.O.,
0.15A @ 30V DC

Normally Energised

EGF1NODCNE100

Normally De-energised

EGF1NODCDE100

—

Solid-State, N.C.,
0.15A @ 30V DC

Normally Energised

EGF1NCDCNE100

Normally De-energised

EGF1NCDCDE100

Solid-State, N.O.,
1A @ 240V AC

—

Normally Energised

EGF3NOACNET3

Normally De-energised

EGF3NOACDET3

Solid-State, N.C.,
1A @ 240V AC

—

Normally Energised

EGF3NCACNET3

Normally De-energised

EGF3NCACDET3

—

Solid-State, N.O.,
0.15A @ 30V DC

Normally Energised

EGF3NODCNET3

—

336

Item No.

Normally De-energised

0.15A @ 30V DC

Solid-Core Housings

Contacts

Solid-State, N.C.,
0.15A @ 30V DC

Normally De-energised

EGF3NODCDET3

Normally Energised

EGF3NCDCNET3

Normally De-energised

EGF3NCDCDET3

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches

B51
Power Supply

Output Signal

Current Selectable Range

Item No.

24V DC ± 5% Auxiliary Power

0 – 5 or 0 – 10V DC

10, 25 or 50A

EPRM0510ASP

50, 75 or 100A

EPRM1510ASP

100, 150 or 200A

EPRM2510ASP

200, 300 or 400A

EPRM3510ASP

10, 25 or 50A

EPRM0420LSP

50, 75 or 100A

EPRM1420LSP

100, 150 or 200A

EPRM2420LSP

200, 300 or 400A

EPRM3420LSP

10, 25 or 50A

EPRMR0510ASP

50, 75 or 100A

EPRMR1510ASP

100, 150 or 200A

EPRMR2510ASP

AC Current Sensors

24V DC ± 5% Loop-Powered

4 – 20 mA

Split-Core Housings

Automation & Control

Eaton EPRM Series CurrentWatch Current Sensors
•	 True RMS Output Models Available - True RMS technology is accurate on distorted waveforms
like VFD or SCR outputs
•	 Switch-Selectable Input & Output Ranges - Field selectable input accommodates multiple AC
current ranges, while voltage output models offer choice of 0-5V DC or 0-10V DC analogue outputs
•	 Application Versatility - Supports input ranges of up to 400A & standard 50/60 Hz or distorted
(VFD, SCR) loads
•	 Agency Approvals & Patented Technology - CE Approved & UL 508 Pending with a patented
technology that eliminate problems inherent with magnetic technology such as core saturation
•	 Applications - Motor Control Centres, Automation & Data Logging & VFD Controlled Loads.

True RMS Sensors
24V DC ± 5% Auxiliary Power

24V DC ± 5% Loop-Powered
Split-Core Housings

0 – 5 or 0 – 10V DC

4 – 20 mA

200, 300 or 400A

EPRMR3510ASP

10, 25 or 50A

EPRMR0420LSP

50, 75 or 100A

EPRMR1420LSP

100, 150 or 200A

EPRMR2420LSP

200, 300 or 400A

EPRMR3420LSP

eaton corporation New Zealand Product Guide

337

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches

Automation & Control

Eaton EAC Series CurrentWatch Current Sensors
•	 Highly Accurate - Factory matched & calibrated single-piece sensor is more accurate than traditional
two-piece, field-installed solutions
•	 Average Responding - “Average Responding” algorithm gives an RMS output on pure sine waves,
perfect for constant speed (linear) loads
•	 Jumper Selectable Ranges - The ability to change input ranges reduces inventory & eliminates
zero & span
•	 Isolation - Output is magnetically isolated from the input for safety & elimination of insertion loss
(voltage drop)
•	 UL, C-UL & CE Approved - Accepted worldwide. Typical Applications - Automation Equipment,
Data Loggers & Panel Meters

Top Terminal Current Sensors



B51

Power Supply

Aperture Size

Output Signal

Current Range

Item No.

Self-Powered
(No External Power Needed)

0.74 in. (19 mm)

0 – 5V DC

10, 20 or 50A

EAC105SC

100, 150 or 200A

EAC205SC

0 – 10V DC

10, 20 or 50A

EAC110SC

100, 150 or 200A

EAC210SC

4 – 20 mA

2 or 5A

EAC0420SC

10, 20 or 50A

EAC1420SC

100, 150 or 200A

EAC2420SC

10, 20 or 50A

EAC105SP

24V DC Loop-Powered
Solid-Core Housings

Self-Powered (No
External Power Needed)

0.85 in. (21.6 mm)

0 – 5V DC

0 – 10V DC

24V DC Loop-Powered

4 – 20 mA

Split-Core Housings

120V AC

24V AC/DC
Split-Core Housings

338

eaton corporation New Zealand Product Guide

4 – 20 mA

4 – 20 mA

100, 150 or 200A

EAC205SP

10, 20 or 50A

EAC110SP

100, 150 or 200A

EAC210SP

2 or 5A

EAC0420SP

10, 20 or 50A

EAC1420SP

100, 150 or 200A

EAC2420SP

2 or 5A

EACP0420120SP

10, 20 or 50A

EACP1420120SP

100, 150 or 200A

EACP2420120SP

2 or 5A

EACP042024USP

10, 20 or 50A

EACP142024USP

100, 150 or 200A

EACP242024USP

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches

Top Terminal Current Sensors

B51

Power Supply

Aperture Size

Output Signal

24V DC Loop-Powered

0.74 in. (19 mm)

4 – 20 mA

Current Range

Item No.

2 or 5A

EACR0420SC

10, 20 or 50A

EACR1420SC

100, 150 or 200A

EACR2420SC

2 or 5A

EACR0420SP

10, 20 or 50A

EACR1420SP

100, 150 or 200A

EACR2420SP

Automation & Control

Eaton EACR Series CurrentWatch Current Sensors
•	 True RMS Output - True RMS technology is accurate on distorted waveforms like VFD
or SCR outputs
•	 Jumper-Selectable Ranges - Reduces inventory & eliminates zero
& span isolation - Output is magnetically isolated from the input for safety
& elimination of insertion loss (voltage drop)
•	 UL, C-UL & CE Approved, Applications - VFD Controlled Loads, SCR Controlled Loads
& Switched mode Power Supplies & Electronic Ballasts

Solid-Core Housings
24V DC Loop-Powered

0.85 in. (21.6 mm)

4 – 20 mA

Split-Core Housings

ECS7 Series CurrentWatch Current Switches
•	
•	
•	
•	
•	

Self-Powered & Self-Calibrating. Reduces installation costs
Status Monitoring, Overload & Operating Window Options
Choose the operating style that matches your application
Universal Output . AC or DC compatibility with any automation system
UL, C-UL & CE Approved, Applications - Conveyors, Electronic Proof of Flow
& Pump Protection

Front & Top Terminal Switches

B51

Power Supply

Output Type

Aperture Size

Intelligent Logic

Item No.

Self-Powered (No
External Power Needed)

Normally Open

0.74 in. (19 mm)

Over/Underload, 1.5 – 150A
Self-Calibrating

ECS701SC 

Overload Only, 1.5 – 150A Self-

ECS700SC

Calibrating

Solid-Core Housing
0.85 in. (21.6 mm)

Underload Only, 1.5 – 150A
Self-Calibrating

ECS702SC

Over/UnderLoad, 2.8 – 150A
Self-Calibrating

ECS711SP 

Overload Only, 2.8 – 150A SelfCalibrating

ECS710SP

Underload Only, 2.8 – 150A
Self-Calibrating

ECS712SP

Split-Core Housing
 Output is closed when current is within ± 15% window.

eaton corporation New Zealand Product Guide

339

Power Control
Automation & Control

Automation & Control

CurrentWatch Current Sensors & Switches
Eaton ECSTD Series CurrentWatch Current Switches
•	 Adjustable Start-Up/Delay Timer - Field adjustable from 0-15 seconds to eliminate nuisance alarms due
to start-up inrush or temporary overcurrent conditions
•	 Choice of N.O./N.C. AC or Universal Outputs - Contact ratings of 1.0A @ 240V AC or universal outputs
of 0.15A @ 240V AC/DC (N.O. models) & 0.2A @ 135V AC/DC (N.C. models) for use with most standard
motor control systems
•	 Improved Ease of Installation & Use - Self-powered, split-core models simplify installation, 1.0A AC
rating eliminates need for time delay relay & status LED provides visual indication of setpoint trip
& contact status
•	 Industrial Grade Performance - Constant hysteresis & linear response characteristics enhance
setpoint accuracy
•	 Agency Approved - UL Listed, CE pending
•	 Applications - Motor Protection & High Inrush or Temporary Overload Current

B51
Power Supply

Aperture Size

Output Type

Setpoint Options

Item No.

0.75 in. (19 mm)

Normally Open

Adjustable Setpoints: 1.5 – 12,
12 – 55 or 50 – 175A

ECSTD401SC

Normally Closed

Adjustable Setpoints: 1.5 – 12,
12 – 55 or 50 – 175A

ECSTD402SC

Normally Open

Adjustable Setpoints:
2 – 12, 12– 55 or
50 – 200A

ECSTD404SP

Normally Closed

Adjustable Setpoints:
2 – 12, 12 – 55 or
50 – 200A

ECSTD405SP

Normally Open

Adjustable Setpoints:
1.5 – 12, 12 – 55 or
50 – 175A

ECSTD406SC

Normally Closed

Adjustable Setpoints:
1.5 – 12, 12 – 55 or
50 – 175A

ECSTD407SC

Normally Open

Adjustable Setpoints:
2 – 12, 12– 55 or
50 – 200A

ECSTD408SP

Normally Closed

Adjustable Setpoints:
2 – 12, 12 – 55 or
50 – 200A

ECSTD409SP

AC Output Switches (N.O./N.C. 1A @ 240V AC)
Self Powered
(No External Power Needed)

Solid-Core Housings
0.85 in. (21.6 mm)

Split-Core Housings
AC/DC Output Switches (N.O. 0.15A @ 240V AC/DC, N.C. 0.2A @ 135V AC/DC) 
Self Powered
(No External Power Needed)

0.75 in. (19 mm)

Solid-Core Housings
0.85 in. (21.6 mm)

Split-Core Housings


340

Preferred for PLC inputs.

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
CurrentWatch Current Sensors & Switches

Top Terminal Current Switch

B51

Power Supply

Aperture Size

Output Signal

Setpoint & LED Configuration

Item No.

Self Powered
(No External Power Needed)

0.74 in. (19 mm)

Normally Open

Adjustable 1 – 150A Setpoint
with LED

ECSNOASC

Normally Closed

Solid-Core Housings
0.85 in. (21.6 mm)

Normally Open

Normally Closed
Split-Core Housings
-

-

-

Fixed 1.0A Setpoint No LED

ECSNOFSC

Adjustable 1 – 150A Setpoint
with LED

ECSNCASC

Fixed 1.0A Setpoint No LED

ECSNCFSC

Adjustable 1.75 – 150A
Setpoint with LED

ECSNOASP

Fixed 1.5A Setpoint
No LED

ECSNOFSP

Adjustable 1.75 – 150A Setpoint
with LED

ECSNCASP

Fixed 1.5A Setpoint No LED

ECSNCFSP

-

EDINKIT

Automation & Control

Eaton ECS Series CurrentWatch Current Switches
•	 Universal Outputs N.O. or N.C. solid-state switch for control circuits up to 240V AC/DC
•	 Easily Adjustable Setpoint - Increases application flexibility & speeds start-up
•	 Solid- or Split-Core Housings
•	 LED Indication - Provides quick indication of contact status
•	 Built-In Mounting Feet - Simple, two-screw panel mount or attach with optional
DIN-rail mounting kit accessory
•	 Applications - Electronic proof of flow, Conveyors, Lighting Circuits, Fans, Pumps,
Heating elements, Critical motors & Ancillary equipment

DIN Rail Mounting Kit*
*Sensor pictured for reference & not included in kit.

eaton corporation New Zealand Product Guide

341

Power Control
Automation & Control
Plug In Relays - D2 Series

D2PF 2 A A
Type

Coil Voltage
Contact Configuration

Automation & Control

D2PR = Standard Relay
D2PF = Full-Featured Relay

Options

2 = DPDT
4 = 4PDT
5 = DPDT Latching

A =	LED, Test Button, Flag Indicator,
	 Flange Mounting, Lock-Down
	 Door, Finger-Grip Cover, I.D. Tag
3 =	Indicating Light and Test Button
4 =	Flange Mounting

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.

Eaton D2PF2 2 Pole Relays
•	 Flag indicator shows relay status in manual or
powered condition
•	 Bi-polar LED status lamp allows for reverse
polarity applications
•	 LED status lamp shows coil “ON” or “OFF”
status — ideal for use in low light applications
•	 Shows coil ON or OFF status
•	 Colour coded pushbutton identifies AC coils
with red or DC coils with blue pushbuttons
•	 Allows for manual operation of relay without
the need for coil power
•	 Ideal for field service personnel to test control circuits
•	 Lock down door, when activated, holds pushbutton & contacts in the
operate position
•	 Excellent for analysing circuit problems
•	 Finger-grip cover allows operator to remove relays from sockets more
easily than conventional relays
•	 White plastic I.D. tag/write label used for identification of relays in
multi-relay circuits

Eaton D2PF2 2 Pole Relays

342

B51

Description

Voltage

Item No.

Relay 8 Amps 48V DC 2 Pole

48V DC

D2PF2AW1

Relay 8 Amps 24V DC 2 Pole

24V DC

D2PF2AT1

Relay 8 Amps 24V AC 2 Pole

24V AC

D2PF2AT

Relay 8 Amps 240V AC 2 Pole

240V AC

D2PF2AB

Relay 8 Amps 12V DC 2 Pole

12V DC

D2PF2AR1

Relay 8 Amps 12V AC 2 Pole

12V AC

D2PF2AR

Relay 8 Amps 120V AC 2 Pole

120V AC

D2PF2AA

Relay 8 Amps 110VDC 2 Pole

110V DC

D2PF2AA1

2 OR 4 Pole DIN or Panel
Mount Base (Fingersafe)

-

D2PA7-A2

Hold down clip

-

PQC-1782

eaton corporation New Zealand Product Guide

A	 =	 120V ac
A1	 =	 110V dc
B	 =	 240V ac
P	 =	 6V ac
P1	 =	 6V dc
R	 =	 12V ac
R1	 =	 12V dc
T	 =	 24V ac
T1	 =	 24V dc
W1	=	 48V dc

Eaton D2PF4 4 Pole Relays
•	 Flag indicator shows relay status in manual
or powered condition
•	 LED status lamp shows coil “ON” or “OFF”
status — ideal for use in low light applications
•	 Push-to-test button allows for manual
operation of relay without the need for coil
power
•	 Lock-down door holds pushbutton & contacts
in the operate position when activated
•	 Finger-grip cover allows operator to remove relays from sockets easily
•	 I.D. tag/write label to identify relays in multiple-relay circuits
•	 Bi-polar LED allows for reverse polarity applications

Eaton D2PF4 4 Pole Relays

B51

Description

Voltage

Item No.

Relay 3 Amps 48V DC 4 Pole

48V DC

D2PF4AW1

Relay 3 Amps 24V DC 4 Pole

24V DC

D2PF4AT1

Relay 3 Amps 24V AC 4 Pole

24V AC

D2PF4AT

Relay 3 Amps 240V AC 4 Pole

240V AC

D2PF4AB

Relay 3 Amps 12V DC 4 Pole

12V DC

D2PF4AR1

Relay 3 Amps 12V AC 4 Pole

12V AC

D2PF4AR

Relay 3 Amps 110V DC 4 Pole

110V DC

D2PF4AA1

2 OR 4 Pole DIN or Panel
Mount Base (Fingersafe)

-

D2PA7-A2

Hold down clip

-

PQC-1782

Power Control
Automation & Control
Plug In Relays – D3 series

D3PF 2 A A
Type

Coil Voltage
Options

2 = DPDT (8-Pin)
3 = 3PDT (11-Pin)
5 = DPDT Latching (11-Pin) 

A	 =	 120V ac
A1	 =	 110V dc
B	 =	 240V ac
P	 =	 6V ac
P1	=	6V dc
R	 =	 12V ac
R1	=	12V dc
T	 =	 24V ac
T1	 =	 24V dc
W1	=	 48V dc

Blank	=	Relay with Test Button
A	
=	LED, Test Button, Flag
		 Indicator, Lock-Down
		 Door, Finger-Grip Cover,
		 I.D. Tag

Automation & Control

Contact Configuration

D3PR	 =	 Standard Relay
D3PF	 =	 Full Featured Relay

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.  D3PR only.

Eaton D3PF2 8 Pin Round Pin Plug Relays
•	 Flag indicator shows relay status in manual or
powered condition
•	 LED status lamp shows coil “ON” or
“OFF” status
•	 Push-to-test button allows for manual operation
of relay
•	 Lock-down door holds pushbutton & contacts
in the operated position when activated
•	 Finger-grip cover allows operator to remove relays from sockets easily
•	 I.D. tag/write label to identify relays in multiple-relay circuits
•	 Bi-polar LED allows for reverse polarity applications

Eaton D3PF3, D3PR5 11 Pin Round Pin
Plug Relays
•	 Flag indicator shows relay status in manual
or powered condition
•	 LED status lamp shows coil “ON”
or “OFF” status
•	 Push-to-test button allows for manual operation
of relay
•	 Lock-down door holds pushbutton & contacts
in the operated position when activated
•	 Finger-grip cover allows operator to remove relays
from sockets easily
•	 I.D. tag/write label to identify relays in multiple-relay circuits
•	 Bi-polar LED allows for reverse polarity applications

Eaton D3PF2 8 Pin Plug Relays

D3PF3 11 Pin Round Pin Plug Relays

B51

B51

Description

Voltage

Item No.

Description

Voltage

Relay 12 Amps 24V DC 2 Pole

24V DC

D3PF2AT1

Relay 12 Amps 24V DC 3 Pole

24V DC

Item No.
D3PF3AT1

Relay 12 Amps 24V AC 2 Pole

24V AC

D3PF2AT

Relay 12 Amps 24V AC 3 Pole

24V AC

D3PF3AT

Relay 12 Amps 240V AC 2 Pole

240V AC

D3PF2AB

Relay 12 Amps 240V AC 3 Pole

240V AC

D3PF3AB
D3PF3AA

Relay 12 Amps 12V DC 2 Pole

12V DC

D3PF2AR1

Relay 12 Amps 120V AC 3 Pole

120V AC

Relay 12 Amps 120V AC 2 Pole

120V AC

D3PF2AA

Relay 12 Amps 110V DC 3 Pole

110V DC

D3PF3AA1

Relay 12 Amps 110V DC 2 Pole

110V DC

D3PF2AA1

11 PIN Octal Base

-

D3PA7-A2

8 PIN Octal Base

-

D3PA6

Hold down clip for 2/3-pole

-

PQC-1332

D3PR5 11 PIN Latching Relays

B51

Description

Voltage

Relay 10 Amps 120V AC 2 Pole

120V AC

Item No.
D3PR5A

Relay 10 Amps 24V AC 2 Pole

24V AC

D3PR5T

eaton corporation New Zealand Product Guide

343

Power Control
Automation & Control
Plug In Relays - D4 Series

D4PR 1 1 A
Type

Coil Voltage
Contact Configuration

D4PR = D4PR Standard Relay

Options

Automation & Control

1 = SPDT
2 = DPDT

A	 =	 120V ac
A1	 =	 110V dc
B	 =	 240V ac
P	 =	 6V ac
P1	 =	 6V dc
R	 =	 12V ac
R1	 =	 12V dc
T	 =	 24V ac
T1	 =	 24V dc
W1	=	 48V dc

1 = Indicating Light

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.

D4PR1, D4PR2 Single & Double Pole Slimline Flat Pin Relay
•	 Slim-styled power relay
•	 Socket has built-in hold-down clip
•	 Panel or DIN rail mounting

Eaton D4PR1 Single Pole Slimline Flat Pin Relay
Description

344

Voltage

Item No.

B51

D4PR2 Double Pole Slimline Flat Pin Relay
Description

Voltage

Item No.

Relay 10 Amps 12V DC 1 Pole

12V DC

D4PR11R1

Relay 5 Amps 24V DC 2 Pole

24V DC

D4PR21T1

Relay 10 Amps 24V DC 1 Pole

24V DC

D4PR11T1

Relay 5 Amps 24V AC 2 Pole

24V AC

D4PR21T

Relay 10 Amps 24V AC 1 Pole

24V AC

D4PR11T

Relay 5 Amps 12V DC 2 Pole

12V DC

D4PR21R1
D4PR21A

Relay 10 Amps 240V AC 1 Pole

240V AC

D4PR11B

Relay 5 Amps 120V AC 2 Pole

120V AC

Relay 10 Amps 120V AC 1 Pole

120V AC

D4PR11A

Relay 5 Amps 240V AC 2 Pole

240V AC

D4PR21B

Single Pole Base

-

D4PA1

Double Pole Base

-

D4PA2

eaton corporation New Zealand Product Guide

B51

Power Control
Automation & Control
Plug In Relays - D7 Series

D7PF 2 A B
Type

Coil Voltage
1 = SPDT
2 = DPDT

Options

3 = 3PDT
4 = 4PDT

A	 =	 120V ac
A1	 =	 110V dc
B	 =	 240V ac
P	 =	 6V ac
P1	 =	 6V dc
R	 =	 12V ac
R1	 =	 12V dc
T	 =	 24V ac
T1	 =	 24V dc
W	 =	 48V dc
W1	=	 48V dc

1	 =	 Indicating Light
4	 =	 Flange Mounting
A	 =	 LED, Test Button, Flag
		 Indicator, Lock-Down Door,
		 Finger-Grip Cover, I.D. Tag

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.

Automation & Control

Contact Configuration

D7PR	 =	 Standard Relay
D7PF	 =	 Full Featured Relay

D7PF 2 & 4 Pole Flat Pin Relays
•	 Flag indicator shows relay status in manual or powered condition
•	 Bi-polar LED status lamp allows for reverse polarity applications
•	 Shows coil ON or OFF status
•	 Ideal in low light conditions
•	 Colour coded pushbutton identifies AC coils with red or DC coils with blue pushbuttons
•	 Allows for manual operation of relay without the need for coil power
•	 Ideal for field service personnel to test control circuits
•	 Lock down door, when activated, holds pushbutton & contacts in the operated position
•	 Excellent for analysing circuit problems
•	 Finger-grip cover allows operator to remove relays from sockets more easily than conventional relays
•	 White plastic I.D. tag/write label used for identification

D7PF2 Double Pole Flat Pin Relay

B51

D7PF4 Four Pole Flat Pin Relay

B51

Description

Voltage

Item No.

Description

Voltage

Item No.

Relay 12 Amps 48V DC 2 Pole

48V DC

D7PF2AW1

Relay 12 Amps 48V DC 4 Pole

48V DC

D7PF4AW1

Relay 12 Amps 24V DC 2 Pole

24V DC

D7PF2AT1

Relay 12 Amps 24V DC 4 Pole

24V DC

D7PF4AT1

Relay 12 Amps 24V AC 2 Pole

24V AC

D7PF2AT

Relay 12 Amps 24V AC 4 Pole

24V AC

D7PF4AT

Relay 12 Amps 240V AC 2 Pole

240V AC

D7PF2AB

Relay 12 Amps 240V AC 4 Pole

240V AC

D7PF4AB

Relay 12 Amps 12V DC 2 Pole

12V DC

D7PF2AR1

Relay 12 Amps 12V DC 4 Pole

12V DC

D7PF4AR1

Relay 12 Amps 120V AC 2 Pole

120V AC

D7PF2AA

Relay 12 Amps 12V AC 4 Pole

12V AC

D7PF4AR

Relay 12 Amps 110V DC 2 Pole

110V DC

D7PF2AA1

Relay 12 Amps 120V AC 4 Pole

120V AC

D7PF4AA

D7 2 pole relay base

-

D7PAA-B1

D7 4 pole relay base

-

D7PAD

Hold down clip

-

PQC-1349

Hold down clip

PQC-1351

eaton corporation New Zealand Product Guide

345

Power Control
Automation & Control
Plug In Relays - D8 Series

D8PR 6 TE A
Type

Coil Voltage
Contact Configuration

D8PR = Standard Relay

Options

6 = SPST-NO
7 = DPST-NO

A	 =	120V ac
B	 =	240V dc
R1	=	12V dc
T	 =	24V ac
T1	 =	24V dc

TE = E-Bracket
TF = Flange Mount

Automation & Control

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.

D8PR6 Single Pole High Current Power Relay

D8PR6, D8PR7 Single & Double Pole
High Current Power Relay
•	 Allows switching of 25A & 30A loads
•	 A high-capacity, high-withstand voltage relay
compatible with momentary voltage drops
•	 No contact chattering for momentary voltage
drops up to 50% of rated voltage
•	 UL Class B construction standard
•	 Wide-range AC-activated coil that handles
100 to 120V AC at either 50 or 60 Hz
•	 Panel, DIN rail & flange mounting

Description

Voltage

Relay 30 Amps 24V DC 1 Pole

24V DC

D8PR6TET1

Relay 30 Amps 12V DC 1 Pole

12V DC

D8PR6TER1

Relay 30 Amps 24V AC 1 Pole

24V AC

D8PR6TET

Relay 30 Amps 240V AC 1 Pole

240V AC

D8PR6TEB

Screw terminal DIN adaptor

-

D8PA2

E-bracket mounting adaptor

-

D8PA5

Item No.

D8PR7 Double Pole High Current Power Relay

Plug-In Relays - D9 Series

B51

Description

Voltage

Relay 25Amps 24V AC 2 Pole

24V AC

D8PR7TET

Relay 25Amps 240V AC 2 Pole

240V AC

D8PR7TEB

Relay 25 Amps 24V DC 2 Pole

24V DC

D8PR7TET1

Relay 25 Amps 12V DC 2 Pole

12V DC

D8PR7TER1

Screw terminal DIN adaptor

-

D8PA2

E-bracket mounting adaptor

-

D8PA5

B51

Item No.

D9PR 8B A

Type

Coil Voltage

Contact Configuration

D9PR = Standard Relay

A	 =	120V ac
A1	=	110V dc
B	 =	240V dc

8B	 =	4PST-NO
9B	 =	3PST-NO/SPST-NC
10B	=	 DPST-NO/DPST-NC

R1	=	12V dc
T	 =	 24V ac
T1	 =	 24V dc

For deciphering Item Numbers. Do not use for ordering as not all combinations are readily available.

General Purpose Plug-In Relays — D9 Series
•	 Ideal for 3-phase motor control applications
•	 No contact chattering for momentary voltage drops up to 50%
of rated voltage
•	 Push-to-test button is a standard feature to check contact operation

D9 Series 
Coil Voltage

B51
Item No.

4PST-NO-Power Relay
24V ac

D9PR8BT

120V ac

D9PR8BA

240V ac

D9PR8BB

24V dc

D9PR8BT1

3PST-NO/SPST-NC Power Relay
120V ac

D9PR9BA

DPST-NO/DPST-NC Power Relay

346

eaton corporation New Zealand Product Guide

24V ac

D9PR10BT

120V ac

D9PR10BA

24V dc

D9PR10BT1

Power Control
Automation & Control
Interface Relays – XR series

XR U 1 D120 G
Type

Gold plated contacts
Connection Type
U = Screw
P = Spring-Cage

Coil Voltage
Number of Poles

D12	 =	12V dc
D120U	=	120V ac / 110V dc
D24	 =	24V dc
D230U	=	24Vac / dc

1 = 1 PDT
2 = 2 PDT

G	
=	Yes
Blank	 =	No

Automation & Control

XR = XR Terminal Block Relay

XR Terminal Block Interface Relays
•	
•	
•	
•	
•	
•	
•	

6mm wide (1P), 14mm wide (2P) relay	
screw connection or spring-cage	
Plug-in jumpers or bridges available	
SPDT or DPDT contacts rated 6A	
DIN rail mount, LED indication	
Field-replaceable pluggable miniature relay	
12VDC to 110VDC/120VAC available	
10A High current series in SPDT

B51

AccessoriesB51

Description

Item No.

Description

Item No.

XR Relay, 1P, 6A, 12VDC, screw conn

XRU1D12

2-position snap-in Jumper, grey

XRAFBST2GY

XR Relay, 1P, 6A, 120VAC/110VDC, screw conn

XRU1D120U

80-position snap-in Jumper, grey

XRAFBST500GY

XR Relay, 1P, 6A, 230VAC/220VDC, screw conn

XRU1D230U

Power Terminal Block

XRAPLCESK

XR Relay, 1P, 6A, 24VDC, screw conn

XRU1D24

End Cover

XRAATPBK

XR Relay, 1P, 6A, 24VAC/DC, screw conn

XRU1D24U

XR Relay, 2P, 6A, 12VDC, screw conn

XRU2D12

XR Relay, 2P, 6A, 120VAC/110VDC, screw conn

XRU2D120U

XR Relay, 2P, 6A, 230VAC/220VDC, screw conn

XRU2D230U

XR Relay, 2P, 6A, 24VDC, screw conn

XRU2D24

XR Relay, 2P, 6A, 24VAC/DC, screw conn

XRU2D24U

XR Relay, 1P, 6A, 12VDC, spring-cage

XRP1D12

XR Relay, 1P, 6A, 120VAC/110VDC, spring-cage

XRP1D120U

XR Relay, 1P, 6A, 230VAC/220VDC, spring-cage

XRP1D230U

XR Relay, 1P, 6A, 24VDC, spring-cage

XRP1D24

XR Relay, 1P, 6A, 24VAC/DC, spring-cage

XRP1D24U

XR Relay, 2P, 6A, 230VAC/220VDC, spring-cage

XRP2D230U

XR Relay, 1P, 10A, 12VDC, screw conn

XRU1H12

XR Relay, 1P, 10A, 120VAC/110VDC, screw conn

XRU1H120U

XR Relay, 1P, 10A, 230VAC/220VDC, screw conn

XRU1H230U

XR Relay, 1P, 10A, 24VDC, screw conn

XRU1H24

XR Relay, 1P, 10A, 24VAC/DC, screw conn

XRU1H24U

eaton corporation New Zealand Product Guide

347

Power Control
Automation & Control
Rhomberg Monitoring Relays
Rhomberg 3-Phase
Sequence/Failure/Asymmetry Relays
•	 Protects Against Phase Imbalance or
Asymmetry, Phase Loss or Phase Reversal
•	 Sensitivity (Nps) Adjustment
•	 Insensitive To Regenerated EMF
•	 Loss of Neutral Detection in SP431

Automation & Control

B57

Rhomberg Voltage Monitors (AC & DC)
& Frequency Relays
•	 11 Pin Plug In or DIN Rail Mount Relay
(with Plug In Terminals)
•	 250Vac/10A Relay
•	 Slimline & Slimline-D Series

B57
Description

Item No.

Voltage Comparator adj delay DPDT 415VAC

AP231/400AD

Description

Item No.
AP430/*S

Overvoltage & undervoltage monitoring relay,
24VDC

AP224/24VDCS

Ph Fail, Ph Seq, Ph Asy Detection with 1 C/O
& LEDs

AP430/*D

Overvoltage & undervoltage monitoring relay,
240VAC

AP224/240VACS

Ph Fail, Ph Seq, Ph Asy Detection with 2 C/O
& LEDs

SP430/*-SP

Voltage Monitor 1-Ph Selectable with Time
Delay

P200PD*S3

Ph Fail, Ph Seq, Ph Asy Detection Plug In 1
C/O & LEDs

SP430/*-DP

Voltage Monitor 1-Ph Selectable with Time
Delay Plug In

SP201/*-SP

Ph Fail, Ph Seq, Ph Asy Detection Plug In 2
C/O & LEDs

SP431/*-SP

Voltage Window Comparator 1-Ph Selectable
with Time Delay

P220PD*S3

Ph Fail, Ph Seq, Ph Asy Loss of Neutral
Detection Plug In

SP433/*-SP

Voltage Window Comparator 1-Ph Selectable
with Time Delay Plug In

SP221/*-SP

Ph Fail, Ph Seq Detection Plug In with LEDs
11 Pin DIN Rail Base

S3B

Voltage Window Comparator 3-Ph Selectable
with Time Delay

P230PD**S3

Voltage Window Comparator 3-Ph Selectable
with Time Delay Plug In

SP231/**-SP

Voltage Window Comparator 3-Ph + N Over
& Under

SP232/**-SP

Frequency Monitor Over & Under 50Hz

SP320/**-SP

11 Pin DIN Rail Base

S3B

* Specify voltage: 110, 115, 220, 380, 400, 415 & 525Vac.

Rhomberg Current Relays/Monitors
(AC & DC) Single Phase
•	 11 Pin Plug In or DIN Rail Mount Relay
(with Plug In Terminals)
•	 250Vac/10A Relay
•	 Single Pole & 2 Pole Configuration
•	 Slimline & Slimline-D Series

* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac
** Specify voltage: 24, 110, 240, 415Vac.

Rhomberg Bases For Monitoring Relays

B57

•	

Description

Item No.

Current Monitor 5 Amp AC/DC Selectable with
Time Delay

P100PD*S3

Current Monitor 5 Amp AC/DC Selectable with
Time Delay Plug In

SP103/*-SP

Current Monitor For DC Shunt Selectable with
Time Delay

P101PD*S3

Current Monitor For DC Shunt Selectable with
Time Delay Plug In

SP104/*-SP

Current Window Comparator AC Adjustable
with Time Delay

P120PD*S3

Current Window Comparator AC Adjustable
with Time Delay Plug In

SP123/*-SP

•	

Single Phase Reverse Power Monitor For AC
Current

SP510/**-SP

•	

11 Pin DIN Rail Base

S3B

•	

B57
Description

Item No.

11 Pin DIN Rail Socket / Base

S3B

Rhomberg Motor/Pump Protection Relays 	
•	
•	

* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.
** Specify voltage: 24, 110, 240, 415Vac.

Shrouded terminals

•	
•	
•	

Borehole Pump Protection
Auto-Calibrating
Overload (Blocking/Closed Valve)
Protection
Underload (Running Dry) Protection
with Auto Restart Timer
Max 4kW Without External CT
Over & Under Voltage Protection
Phase Sequence/Failure Monitoring
Liquid Level Control

B57

348

eaton corporation New Zealand Product Guide

Description

Item No.

Motor/Pump Protection Relay 240Vac
Single Phase

MP820/240AS

Motor/Pump Protection Relay 400-415Vac
Three Phase

MP830/415AS

Power Control
Automation & Control
EMR4 measuring & monitoring relays
Current, phase, sequence relays, phase imbalance monitoring
Description

Current measuring
range, I ~ /I = A

Circuit symbol

M00
Supply voltage

Item No.

3 – 30 mA
10 – 100 mA
0.1 – 1 A

24 – 240 V
AC/DC

EMR4-I1-2-A

0.3 – 1.5 A
1–5A
3 – 15 A

24 – 240 V
AC/DC

EMR4-I15-2-A

0.3 – 1.5 A
1–5A
3 – 15 A

220 – 240 V
AC

EMR4-I15-2-B

Supply voltage

Item No.

200 – 500 V
AC

200 – 500 V
AC

EMR4-F500-2

380 – 415 V
50 Hz

380 – 415 V
50 Hz

EMR4-A400-1

• Switching hysteresis adjustable
from 5 – 30%
• Response delay 0.1 – 30 s
• EMR4...-A: monitors one upper or
lower limit
• EMR4...-B: monitors one upper
limit
• Extension of the measurement
range possible with current
transformers

Description

Monitoring
voltage

Circuit symbol

Automation & Control

Current monitoring relays, single-phase

Phase sequence relay
• Monitors three-phase systems
for phase sequence & phase
failure (< 0.6 x Ue)
• Supply voltage = voltage being
monitored

Phase imbalance monitoring relay
• Monitors three-phase systems
for phase imbalance
• Detects phase failure even at
95% voltage feedback from the
motor
• Response delay: 0.5 s
• Phase imbalance response
threshold adjustable from 5 – 15 %
• Phase sequence detection
• Supply voltage = voltage being
monitored

Current, phase, sequence relays, phase imbalance monitoring
Description

Monitoring voltage
adjustable from

Circuit symbol

M00
Supply voltage

Item No.

Umin 300 – 380
V AC

160 – 330 V AC

EMR4-W500-2-C

Umax 420 – 500
V AC

300 – 500 V AC

EMR4-W500-2-D

Umin 350 – 430
V AC
Umax 500 – 580
V AC

300 – 500 V AC

EMR4-W580-2-D

Phase monitoring relays
• Monitors three-phase systems
for phase sequence, over- &
undervoltage & phase failure (<
0.6 x Ue)
• 3-phase voltage monitoring
within a range
• Selectable On-delay or Off-delay
(0.1 – 10 s)

eaton corporation New Zealand Product Guide

349

Power Control
Automation & Control
EMR4 measuring & monitoring relays
Level monitoring relays, insulation monitoring relays, sealable shrouds
Description

Response sensitivity

Circuit symbol

M00
Supply voltage

Item No.

Automation & Control

Liquid level monitoring relays
• Monitors the level of conductive liquids
• Monitors the ratio of mixtures of conductive liquids
• Selectable: protection against running dry or overflowing

5 kW – 100 kW

220 – 240 V AC

EMR4-N100-1-B

• Monitors the level of conductive liquids
• Monitors the ratio of mixtures of conductive liquids
• Selectable On-delay or Off-delay between 0.5 – 10 s

250 W – 500 kW

220 – 240 V AC

EMR4-N500-2-B

• Monitors the level of conductive liquids
• Monitors the ratio of mixtures of conductive liquids
• Selectable On-delay or Off-delay between 0.5 – 10 s

250 W – 500 kW

24 – 240 V AC/DC

EMR4-N500-2-A

Supply voltage

Item No.

Description

Insulation
resistance
range

Circuit symbol

Insulation monitoring relays
• Monitors the insulation resistance in nonearthed DC
supply systems
• Selector switch for open or closed-circuit principle
• With test & reset facilities
• Status indication via LEDs

10 – 110 kW

24 – 240 V AC/DC

EMR4-RDC-1-A

• Monitors the insulation resistance between non-earthed
AC supply systems & the protective conductor/earth
• Tripping function memory
• Insulation monitoring in 1- & 3-phase AC supply systems
• Test via local test button or remote
test operation
• Status indication via LEDs to
VDE 0413 / Part 2

10 – 110 kW

24 – 240 V AC/DC

EMR4-RAC-1-A

Mounting width (mm)

Item No.

22.5

EMR4-PH22

45

EMR4-PH45

Sealable shrouds

350

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
Rhomberg Control Relays
•	
•	

Timers

Switching Amplifiers, Tacho Relays,
Thermistor Relays, Flip Flop Relays
Power Supply Modules

Rhomberg Multi-Function DIN Rail
& Plug In
•	 Delayed-ON, Interval, Recycling Functions
22.5mm Size
•	 0.2 Sec. To 100 Hours
•	 DPDT Relay (5A Per Contact)

B57
Description

Item No.

Switching Amplifier/Relay For NAMUR Sensors
Plug In

SC300/*-SP

Switching Amplifier/Relay For Three Wire DC
Sensors Plug In

SC314/*-SP
SC320/*-SP

Description

Item No.

0.2 Sec - 100 Hrs 2 Timed Contacts DIN Rail

AT100/**D

0.2 Sec - 120 Sec 2 Timed Contacts 11 Pin

ST100/**DP

22 Sec - 240 Min 2 Timed Contacts 11 Pin

ST101/**DP

0.2 Sec - 100 Hrs 1 Timed Contact DIN Rail

AT110/*S

Control Relay For Rhomberg Photo Electric
Sensors Plug In

SC410/*-SP

Temperature Control Relay For PT-100/Rtd
Sensors Plug In

SC501/*-SP

0.2 Sec - 120 Sec 2 Timed Contacts 11 Pin (Hold or Pulse Reset
NPN)

ST110/**DP

Thermistor Motor Protection Relay Auto Reset
Plug In

SC510/*-SP

22 Sec - 240 Min 2 Timed Contacts 11 Pin (Hold or Pulse Reset
NPN)

ST111/**DP

Thermistor Motor Protection Relay Auto Reset
Plug In

SC510/*-DP

11 Pin DIN Rail Base (Accepts Retainer Clip with Plug in Timers)

S3B

Thermistor Motor Protection Relay Test & Reset
Buttons Plug In

SC511/*-SP

Flip Flop Relay No Memory Contact Input
Plug In

SC610/*-SP

Flip Flop Relay with Memory Contact Input or
Sensor Plug In

SC611/*-SP

Multi Function Preselect Counter Plug In

SC700/*-SP

Preset Counter Panel Mount 48x48

CC701/*DSP

Power Supply 250Vac / 24Vac 150mA
Unregulated Plug In

SC900/240/24A

Power Supply 250Vac / 24Vdc 120mA
Unregulated Plug In

SC900/240/24D

Power Supply 250Vac / 24Vdc 100mA Regulated
Plug In

SC900/240/24R

Power Supply 240Vac / 12Vdc 150mA Regulated
Plug In

SC900/240/12R

11 Pin DIN Rail Base
* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.

Automation & Control

Tacho Relay For NAMUR Sensors Pulse In
0-1mA Re-Transmit Plug In

B57

* Specify voltage: 12, 24Vdc, 24, 110, 240, 415Vac.
** Specify voltage: 30Vdc, 250, 415Vac.

Rhomberg Asymmetrical Recycling
DIN Rail & Plug in
•	 Asymmetrical Recycling - ON or OFF
Cycle First
•	 DPDT Relay (5A Per Contact)
•	 DIN Rail & Plug in 22.5mm Size

B57

S3B

Description

Item No.

0.2 Sec - 240 Min 2 Timed Contacts DIN Rail

AT200/**D

T1 = 0 - 120s, T2 = 0 - 120s 2 Timed Contacts 11 Pin

ST200/**DP

T1 = 0 - 120s, T2 = 22s - 240m 2 Timed Contacts 11 Pin

ST201/**DP

T1 = 22s - 240m, T2 = 22s - 240m 2 Timed Contacts 11 Pin

ST202/**DP

T1 = 22s - 240m, T2 = 0 - 120s 2 Timed Contacts 11 Pin

ST203/**DP

Multi Function Type 0.2 Sec - 120 Sec 1 Timed Contact 11 Pin

ST210/*SP

11 Pin DIN Rail Base (Accepts Retainer Clip with Plug in Timers)

S3B

* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac
** Specify voltage: 30Vdc & 250, 415Vac

eaton corporation New Zealand Product Guide

351

Power Control
Automation & Control
Timers
ETR4M00

Description

Rated operational current AC–15

Conventional
thermal current

240 V, Ie , A

400 V, Ie , A

Ith , A

3

3

6

Time range

Item No.

Item No.

0.05 – 1 s
0.15 – 3 s
0.5 – 10 s
1.5 – 30 s
5 – 100 s
15 – 300 s
1.5 – 30 min
15 – 300 min
1.5 – 30 h
5 – 100 h

ETR4-11-A

ETR4-11-W

ETR4-69-A

ETR4-69-W

ETR4-70-A

-

3 – 60 s

ETR4-51-A

ETR4-51-W

ETR4 electronic timing relays, 22.5 mm wide
Actuating voltage:
Type suffix -A: 24 – 240 V DC & 24 – 240 V AC, 50/60 Hz
Type suffix -W: 400 V AC, 50/60 Hz

Automation & Control

On-delayed

Multi-function relay

3

3

6

Multi-function relay with connection for potentiometer & two
changeover contacts that can be converted to two timed contacts
or one non-delayed contact & one timed contact.

3

3

6

Star-delta timing relays

3

3

6

ETR2M00
Rated operational current AC–15

Conventional
thermal current

240 V, Ie , A

400 V, Ie , A

Ith , A

On-delayed

3

–

5

Off-delayed

3

–

5

Fleeting contact on energisation

3

–

5

Flashing, pulse initiating

3

–

5

Flashing, 2 speeds or pause initiating

3

–

5

Multi-function relay (i.e. all of the above plus fleeting contact on
de-energisation

3

–

5

Description

Time range

Item No.

0.05 – 1 s
0.5 – 10 s
5 – 100 s
0.5 – 10 min
5 – 100 min
0.5 – 10 h
5 – 100 h

ETR2-11

ETR2 electronic timing relays, 17.5 mm wide
Actuating voltage:
24 – 48 V DC & 24 – 240 V AC, 50/60 Hz

352

eaton corporation New Zealand Product Guide

ETR2-12
ETR2-21
ETR2-42
ETR2-44
ETR2-69

Power Control
Timers

Time Switches

Rhomberg Special Function Timers
•	 No Power Delayed OFF Functions - ‘True OFF Delay’
•	 Multi start attempt timer for repeated
starting attempts of standby generator
sets with start failure alarm output
•	 Slim Housing (22.5mm)

Eaton Time switches
•	 Analogue synchronous or digital types
•	 With or without battery backup
•	 Standard DIN rail mountable
•	 Daily/weekly/yearly time switches
•	 Daylight saving feature
•	 Easy to program, plain English menu
•	 16A AC-1, 240V AC changeover contact
•	 1, 2 or 4 channel models
•	 Pulse output option, for school bells
•	 Clock dial or 18mm wide, captive pins
•	 Replacement batteries available

B57
Description

Item No.

0.2 Sec - 120 Sec No Power Delay OFF Timer 1 Timed Contact 11 Pin

ST300/*SP

22 Sec - 240 Min No Power Delay OFF Timer 1 Timed Contact 11 Pin

ST301/*SP

Multi Start Attempt Timer 1 C/O

AT500/*S

11 Pin DIN Rail Base (Accepts Retainer Clip with Timer)

S3B

* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.

B51
Description

Item No.

Analogue timeswitches (day/week program)

Rhomberg Star Delta Timers
•	 Star Time Adjustable up to 60 Sec.
(30 Sec. Max Adjustment Available on Request)
•	 Pause Time 75msec (50msec Available On Request)
•	 Relay Rests in “Centre-Off” Position
During Pause & Power OFF State
•	 5A Relay Output

B57
Description

Item No.

Star Time Adjustable Pause Time 75msec Fixed 1 C/O DIN Rail

AT130/*AS

Star Time Adjustable Pause Time 75msec Fixed 1 C/O Plug in

ST130/*-SP

11 Pin DIN Rail Base (Accepts Retainer Clip with St310)

S3B

* Specify voltage: 110, 240, 415Vac

Eaton TRL 18mm DIN Timers
•	 Slim 18mm DIN rail mount timers
•	 Timing range 50 msec to 100 hours
•	 Changeover output contact rated 8A,
240VAC
•	 Universal supply voltage
12V-240V AC/DC for TRL07 & TRLPG
24V-240V AC/DC for TRL04

Analogue timeswitch, clock dial, 24 hr, 1 ch, captive pins

TAD1NC

Analogue timeswitch, slim 18mm module, 24 hr, 1 ch

TAD1NCS

Analogue timeswitch, clock dial, 7 day, battery backup, 1ch, tappets

TAW1

Analogue timeswitch, clock dial, 24 hr, battery backup, 1 ch, captive pins

TAD1

Analogue timeswitch, slim 18mm module, 24 hr, battery backup, 1 ch

TAD1S

Analogue timeswitch, slim 18mm module, 7 day, battery backup, 1 ch

TAW1S

Analogue Timeswitch Dial, 24 Hr, 1 Ch

TAD1NCQA

Analogue Timeswitch Dial, 24 Hr, 7 day, 1 Ch

TADW1NCQA

Analogue Timeswitch Dial Quartz, 24Hr, 7 day 1ch

TADW1QA

Automation & Control

Automation & Control

Digital Timeswitches (week program)
Digital timeswitch, 35mm wide, 7 day, 28 mem, battery backup, 1 ch

TDW1

Digital timeswitch, 18mm wide, 7 day, 28 mem, battery backup, 1 ch

TDW1S

Digital timeswitch, 35mm wide, 7 day, 42 mem, battery backup, 2 ch

TDW2

Digital timeswitch, 35mm, 7 day, 42 mem, battery, pulse/cycle, 2 ch

TDW2E

Digital Timeswitches (year program)

Eaton TR series Plug-in Timers
•	 20 time ranges & 10 timing functions
•	 Time delays from 0.1 sec. to 600 hrs
•	 2 Form C DPDT delayed output contacts

Digital timeswitch, 105mm, 365 day, 324 mem, pulse, battery, 2 ch

TDY2

Same as TDY2 digital timeswitch, but with radio control capability

TDY2E

Digital timeswitch, 105mm, 365 day, 324 mem, pulse, battery, 4 ch

TDY4

Same as TDY4 digital timeswitch, but with radio control capability

TDY4E

Twilight switches (DIN mount control unit
+ remote sensor)

Eaton E42A24M analogue panel-mount timer
11-pin plug-in multifunction timer
•	 ON delay, OFF delay, pulse output, etc.
•	

B51
Description

Item No.

18mm DIN Multifunction Timer - 4 modes

TRL04

18mm DIN Multifunction Timer - 7 modes

TRL07

18mm DIN Asymmetrical Pulse Generator - 2 modes

TRLPG

Timer S1DXMA Power On Delay 0.20S to 30m 2

TRNB24AD

Timer On Delay 1s - 500h 2 Time 8 PIN 24V ac/dc

TRNP24AD

Timer On Delay 1s - 500h 2 Time 8 PIN 240V ac

TRNP240AC

Timer 8 Mode 1s-500h 2 time 11 PIN 24V ac/dc

TRFP24AD

Timer 8 Mode 1s-500h 2 time 11 PIN 240V ac

TRFP240AC

Timer Battery Powered LCD Time Control 48x48mm

E5-248-C1420

Multifunction Timer 7 mode 48 x 48 mm Panel or DIN mount

E42A24M

Twilight switch, adjustable sensitivity 2-100 lux, 1 ch

TSM1S

Twilight switch, adjustable sensitivity 2-200 lux, 1 ch

TSM1

Twilight switch, adjustable sensitivity 2-2000 lux, 1 ch

TSM1E

Twilight switch, adjustable sensitivity 2-7500 lux, 2 ch

TSM2

Combined timeswitch & twilight switch (DIN mount + remote sensor)
Digital timeswitch, 7 day, sensor adjustable sensitivity 2-2000 lux

TSMC1

eaton corporation New Zealand Product Guide

353

Power Control
Automation & Control
Time Switches

Automation & Control

Eaton Time Switch Accessories

B51

Description

Item No.

Battery for TDY2, TDY2E, TDY4, TDY4E timeswitches

TBAT1

Battery for TAD1, TAW1 timeswitches

TBAT2

Battery for TDW1S timeswitches

TBAT3

Battery for TDW1, TDW2, TDW2E timeswitches

TBAT4

Battery for TAD1S, TAW1S timeswitches

TBAT5

Power supply for DCF antenna (TDY2E & TDY4E)

TDCFMU

Antenna for radio control DCF reception

TDCFANT

Programming software & adapter cable

TPROG

Memory card

TMEMO

Light sensor, built-in type (TSM1S, TSM1, TSM1E, TSMC1)

TSENS

Light sensor, surface-mount type (TSM1S, TSM1, TSM1E, TSMC1)

TSENS1

Light sensor, surface-mount type (TSM2 only)

TSENS2

Terminal cover, for all 18mm timeswitches & twilight switches

TCV1

Terminal cover, for all 35mm timeswitches & twilight switches

TCV2

Terminal cover, for all 54mm analogue clock dial timeswitches

TCV3

Terminal cover, for all 54mm twilight switches

TCV4

Terminal cover, for all 72mm twilight switches

TCV5

Terminal cover, for all 105mm timeswitches & twilight switches

TCV6

Staircase light timeswitches
Analogue staircase light timeswitch, 0.5-20 min, override function

TE7

Analogue staircase light timeswitch, 0.5-20 min, multifunction

TE1

Counters

E5 1 48 C 1 400
Power

Type
Counter Type

E5 = E5 Series

Presets
Front Dimension

1 = Pulse Counter

48 = 48 x 48 mm

1/16 DIN LCD Preset Counter

Display
C = LCD

1 = 1 Preset
2 = 2 Presets

400 = Battery-Powered
421 = ac Power
422 = dc Power

1/16 DIN LCD
Description

B57
Item No.

Battery-Powered 1 Preset LCD
Battery Power 1.89 x 1.89 Inch (48 x 48 mm)

E5-148-C1400

AC/DC-Powered 1 Preset LCD

Battery-Powered
•	 2-line displays count, preset and level of the output
•	 Replacement for electromechanical preset counters
•	 No power supply necessary (battery operated)
•	 Count and reset input electrically separated from counter
through optocoupler input range 12 – 250V AC/DC
AC/DC-Powered
2-line LCD display
•	 Programmable as impulse counter, frequency meter or time meter
with sign and zero blanking
•	

•	

354

Batch mode

eaton corporation New Zealand Product Guide

90 – 260V ac Power 1.89 x 1.89 Inch
(48 x 48 mm))

E5-148-C1421

10 – 30V dc Power 1.89 x 1.89 Inch
(48 x 48 mm)

E5-148-C1422

AC/DC-Powered 2 Preset LCD
90 – 260V ac Power 1.89 x 1.89 Inch
(48 x 48 mm)

E5-148-C2421

10 – 30V dc Power 1.89 x 1.89 Inch
(48 x 48 mm)

E5-148-C2422

Power Control
Automation & Control
Counters

577 00 48 1
Outputs

Type
Function

00 = dc Power
01 = ac Power

48 = Counter

LED Count Control, 6-Digit

1/8 DIN Eclipse Series Preset Counter
•	
•	
•	

1 = Dual Relay Out
2 = Analogue Output (4 – 20mA + 0 – 10V)
3 = Dual Relay + Analogue Output
4 = RS-485 Communications
5 = Dual Relay + RS-485 Communications
6 = Analogue Output + RS-485 Communications
7 = Dual Relay, RS-485 Communications + Analogue Output

1/8 DIN cutout
Type 4X front panel protection
7-segment LED Display

Ratemeters

B57

Description

Item No.

Relay Out, 9 – 30V dc Power

57700481

Relay Out, 85 – 265V ac Power

57701481

Relay & Analogue Out, 9 – 30V dc Power

57700483

Relay & Analogue Out, 85 – 265V ac Power

57701483

Relay & RS-485 Out, 9 – 30V dc Power

57700485

Relay & RS-485 Out, 85 – 265V ac Power

57701485

Relay, Analogue & RS-485 Out, 9 – 30V dc Power

57700487

Relay, Analogue & RS-485 Out, 85 – 265V ac Power

57701487

533 0 0 404
Function

Type
Power

533 = Courier Series

0 = Batter- Powered

Counter

404 = Ratemeter

0 = No Option
1 = Extend Temperature Range
2 = Backlight Option (24V dc required)

1/Tau LCD Ratemeter

Courier Series Battery-Powered
Ratemeter
•	 1/Tau ratemeter
•	 Scaling capabilities
•	 Type 4X protection
•	 Internal battery: 3V, Lithium
Eclipse Series 1/8 DIN LED Ratemeter

Item No.

Battery-Powered

53300404

577 00 48 1
Outputs
Power

00 = dc Power
01 = ac Power

•	
•	

B57

Description

Type
577 = Eclipse Series

•	

Automation & Control

Power

577 = Eclipse Series

Function

1 = Dual Relay Out
2 = Analogue Output (4 – 20mA + 0 – 10V)
3 = Dual Relay + Analogue Output
4 = RS-485 Communications
5 = Dual Relay + RS-485 Communications
6 = Analogue Output + RS-485 Communications
7 = Dual Relay, RS-485 Communications + Analogue Output

48 = Counter

B57

1/8 DIN cutout
Type 4X front panel protection
Front panel programming

B57
Description

Item No.

9 – 30V dc
9 – 30V dc, Alarms
9 – 30V dc, Analogue Out
9 – 30V dc, Alarms,
Analogue Out

57700470
57700471
57700472
57700473

Description

Item No.

9 – 30V dc, RS-485
9 – 30V dc, Alarms, RS-485
9 – 30V dc, Analogue Out, RS-485
9 – 30V dc, Alarms, Analogue Out, RS-485

57700474
57700475
57700476
57700477

85 – 265V ac
85 – 265V ac, Alarms
85 – 265V ac, Analogue Out
85 – 265V ac, Alarms, Analogue Out

57701470
57701471
57701472
57701473

85 – 265V ac, RS-485
85 – 265V ac, Alarms, RS-485
85 – 265V ac, Analogue Out, RS-485
85 – 265V ac, Alarms, Analogue Out, RS-485

57701474
57701475
57701476
57701477

eaton corporation New Zealand Product Guide

355

Power Control
Automation & Control
Hour Meters

6 T - 3H - 508R PM - 406
Number of Digits

Automation & Control

6 = 6 Digits
7 = 7 Digits
8 = 8 Digits

Voltage
Mounting

Function
Option

T = Time Meter

65	 =	 IP65 Seal
3H	=	 3-Hole Mount

Electromechanical Hour Meters

1/16 DIN
•	 High shock-resistance
•	 Without reset
•	 Data retention if power is lost
71.1 mm Round
•	 6-digit hour meter for round panel cut-out
•	 Low cost
•	 Waterproof
•	 Type 4X protection

PM = Panel Mount

402 = dc Voltage
406 = ac Voltage

Size
508R	 =	 50.8 mm Round
4848	 =	 48 x 48 mm Square

Electromechanical Hour Meters
Description

B57

Item No.

1/16 DIN
10 – 30V dc, 1.89 x 1.89 Inch (48 x 48 mm)

8-T-65-4848PM-402

100 – 130V ac, 1.89 x 1.89 Inch (48 x 48 mm)

7-T-65-4848PM-406

187-264V ac, 1.89 x 1.89 Inch (48 x 48 mm)

7-T-65-4848PM-408

71.1 mm Round
115V ac, 2.80 Inch (71.1 mm) Round

6-T-3H-508RPM-406

10 – 80V dc, 2.80 Inch (71.1 mm) Round

6-T-3H-508RPM-402

DIN-Rail Adapter — Accessory

B57

Description
DIN-Rail Adapter for DIN Electromechanical
Hour Meter

Electronic LCD Hour Meters

Electronic LCD Hour Meter
Description

B57
Item No.

Battery-Powered 1/32 DIN 8-digit LCD

Battery-Powered
•	 Low price and high efficiency
•	 Large 8-digit LCD display, height of
the figures 0.31 inch (8 mm)
•	 Different time ranges from 0.1 second to 100,000 hours
•	 Lifetime of the battery is approximately 8 years
AC/DC-Powered
Solid-state hour meters
•	 Record and display up to 99,999.9 hours, rollover and
continue timing
•	 EEPROM memory can retain data for 25+ years
•	 Time accumulation indicated by flashing hourglass icon
•	

356

eaton corporation New Zealand Product Guide

Hours / Minutes, 0.94 x 1.89 Inch (24 x 48 mm)

E5-224-C0440

Hours / Minutes, 10 – 260V Input, 0.94 x 1.89
Inch (24 x 48 mm)

E5-224-C0448

Minutes / Seconds, 0.94 x 1.89 Inch (24 x 48 mm)

E5-224-C0450

Minutes / Seconds, 10 – 260V Input 0.94 x 1.89
Inch (24 x 48 mm)

E5-224-C0458

AC/DC-Powered Round LCD
Elapsed Hour Meter, 48 – 150V dc / 100 – 230V
ac

E42DIR48230

Elapsed Hour Meter w/ Reset, 48 – 150V dc /
100 – 230V ac

E42DIR48230R

Elapsed Hour Meter, 12 – 48V dc / 20 – 60V ac

E42DIR1260

AC/DC-Powered Compact Rectangular LCD
Elapsed Hour Meter, 48 – 150V dc / 100 – 230V
ac

E42DI2448230

Elapsed Hour Meter, w/ Reset, 48 – 150V dc /
100 – 230V ac

E42DI2448230R

Elapsed Hour Meter, 12 – 48V dc / 20 – 60V ac

E42DI241260

Power Control
Automation & Control
Water Pump Pressure Switches
Eaton CHWPS water pump pressure switches
•	 Suitable for all water pumps: submersible, jet, reciprocating, etc.
•	 Available in 20-40, 30-50 & 40-60 psi models
•	 Diaphragm-actuated contacts
•	 Adjustable cut-in & cut-out pressures
•	 Easy wiring & corrosion resistant
•	 Ideal for pump OEM applications
•	 Rated 1-ph 230V, 2.0 HP, 12A
•	 Removable cover, ample wiring space

Description

Item No.

20-40 psi pressure switch

CHWPS2040D

30-50 psi pressure switch

CHWPS3050D

40-60 psi pressure switch

CHWPS4060D

20-40 psi pressure switch c/w pulsation plug

CHWPS2040DP

20-40 psi pressure switch c/w low pressure cut-off

CHWPS2040DL

30-50 psi pressure switch c/w low pressure cut-off

CHWPS3050DL

Automation & Control

B51

Riko Float Switches
•	
•	
•	
•	

Stainless & Plastic Type Floats
Horizontal & Vertical Types
Multiple Level Switches
Suitable For 240Vac

MFS
17A2

MFS
17B2

MFS
17C2

MFS
17D2

MFS
23F

MFS
25J

RFS22

RFS62

RFS8

MFS9N1
MFS9N2

RFS42
Special Models

MFS10N1

RFS9

MFS10N2
MFS21E2

RFS11A2

MFS21K

Float Switch Map

RFS122

B51
Description

Item No.

1/2" NPT Polypropylene Horizontal Float Switch, 90mm x 15mm Dia. 0.5 Amp

MFS10N1

1/2" NPT Nylon-6 Horizontal Float Switch, 90mm Long x 15mm Dia. 0.5 Amp

MFS10N2

PA/rubber Upright Float Switch, 44mm Long x 20mm Dia. 0.5 Amp

MFS17A2

PA/rubber Upright Float Switch, 44mm Long x 20mm Dia. 0.5 Amp, PP clip

MFS17A2PPC

PA/rubber Upright Float Switch, 44mm Long x 26.5mm Dia. 0.5 Amp

MFS17B2

Polypropylene Upright Float Switch, 44mm Long x 25mm Dia. 0.5 Amp

MFS17C2

Polypropylene Upright Float Switch, 44mm Long x 18mm Dia. 0.5 Amp

MFS17D2

1/4” PF PA/rubber Horizontal Float Switch, 38mm x 31mm Dia. 0.5 Amp

MFS21E2

Polypropylene Horizontal Float Switch, 73mm x 15mm Dia. 0.5 Amp

MFS9N1

Nylon-6 Horizontal Float Switch, 73mm Long x 15mm Dia. 0.5 Amp

MFS9N2

S/S Horizontal Float Switch, 73mm Long x 28mm Dia. 0.5 Amp

RFS11A2

1/2" NPT S/S Horizontal Float Switch, 94mm Long x 17mm Dia. 0.5 Amp

RFS122

S/S Upright Float Switch, 42mm Long x 28mm Dia. 0.5 Amp

RFS22

S/S Elbow Float Switch, 83.5mm Long x 28mm Dia. 0.5 Amp

RFS42

S/S Upright Float Switch, 75 Long x 50mm Dia. 0.5 Amp

RFS62

S/S Upright Float Switch, 59mm Long x 43mm Dia. 0.5 Amp

RFS8

S/S Elbow Float Switch, 99mm Long x 28mm Dia. 0.5 Amp

RFS9

316S/S Float only, RFS22

FLOAT316SS

316S/S Float only, RFS62

FLOAT50MM316

eaton corporation New Zealand Product Guide

357

Power Control
Automation & Control

Automation & Control

DC Power Supplies
Eaton PSG range of DC Power Supplies
•	 DIN rail mountable, all mounting hardware supplied
•	 Industrial application, range includes 60 to 480 watts, 2.5 to 20A
•	 1-phase Input 85 to 264V AC, 22-28V DC adj Output
•	 3-phase Input 350 to 575V AC, 22-28V DC adj Output
•	 Wide operating temp -20 to +75 degrees Celsius
•	 Transient surge voltage protection
•	 Certified to IEC, CE, UL; RoHS compliant
•	 Green operation LED for DC OK
•	 MTBF in excess of 800,000 hours
•	 Screw terminal type connections

B57
Description

Item No.

Single-phase AC input type
Power Supply 85-264VAC Input, 24VDC, 2.5A Output, 60

PSG60E

Power Supply 85-264VAC Input, 24VDC, 5A Output, 120W

PSG120E

Power Supply 85-264VAC Input, 24VDC, 10A Output, 240W

PSG240E

Power Supply 85-264VAC Input, 24VDC, 20A Output, 480W

PSG480E

Three-phase AC input type
Power Supply 350-575VAC Input, 24VDC, 2.5A Output, 60W

PSG60F

Power Supply 350-575VAC Input, 24VDC, 5A Output, 120W

PSG120F

Power Supply 350-575VAC Input, 24VDC, 10A Output, 240W

PSG240F

Power Supply 350-575VAC Input, 24VDC, 20A Output, 480W

PSG480F

Liquid Level Controllers
•	
•	
•	

Level Control of Conductive Liquids - Relay & Probes
Level Control of Non-Conductive Liquids or Granular Materials
Relay For Use with Capacitive Proximity Switches

B57
Description

Item No.

Level Relay For Resistive Sensors Single Point Control Plug In

SC100/***ACS

Level Relay Single Pt High / Low C/W Drain Function 1 C/O

AC130/***S

Level Relay Single Pt High / Low C/W Drain Function 2 C/O

AC130/***D

Level Relay Single Pt High / Low C/W Drain Function 1 C/O Plug In

SC130/***S

Level Relay Single Pt High / Low C/W Drain Function 2 C/O Plug In

SC130/***D

Level Relay Non Conductive Type Single Pt High / Low 1 C/O Plug In

SC230/*SP

11 Pin DIN Rail Base

S3B

Accessories
Probe Holder with Screw Cap Incl 3 X 1 MTR Coated SS316 Rods

CP3C

Probe Holder with Screw Cap Incl 2 X 1 MTR Coated SS316 Rods

CP2C

Probe Holder with Screw Cap Incl 1 X 1 MTR Coated SS316 Rods

CP1C

Extension Rods 1 MTR Male / Female

EP1/CEXT

* Specify voltage: 12, 24Vdc & 24, 110, 240, 415Vac.
*** Specify voltage: 24, 110, 240, 415Vac.

358

eaton corporation New Zealand Product Guide

Power Control
Automation & Control
MCS Pressure Switches
With main contacts, R ½“ pressure pipe flange

M00

Preferred setting range

Max. operating
pressure

From Bar

To Bar

Bar

4

7

Make & break pressure: separately infinitely adjustable. Pressures can be
set to any point within the area of the pressure diagram for the appropriate
switch.

Variable switching
differential
Item No.

MCSN pressure switches, IP65, 3-pole
MCSN4

Automation & Control

0.9

Min. switching differential: 0.6 bar
Example: Cut-out pressure 3.3 bar. Cut-in pressure 2.2 bar
2

10

15

MCSN11

Min. switching differential: 1.4 bar
Example: Cut-out pressure 8.5 bar. Cut-in pressure 4.5 bar
5

15

25

MCSN16

Min. switching differential: 2.4 bar
Example: Cut-out pressure 14.5 bar. Cut-in pressure 7.5 bar
8

22

25

MCSN22

Min. switching differential: 3.0 bar
Example: Cut-out pressure 17.5 bar. Cut-in pressure 7.8 bar

eaton corporation New Zealand Product Guide

359

Power Control
Automation & Control
MCS Pressure Switches
With auxiliary contacts, R ¼“ pressure pipe flange

M00

Contacts
Quantity

Preferred setting range

Max.
operating
pressure

From Bar

To Bar

Bar

0.3

4

7

Make & break pressure: separately infinitely adjustable. Pressures can be
set to any point within the area of the pressure diagram for the appropriate
switch.

Variable
switching
differential
Item No.

MCS pressure switches, IP65
MCS4

Automation & Control

1 changeover
contact

Min. switching differential: 0.2 bar
Example: Cut-out pressure 3.3 bar. Cut-in pressure 2.2 bar
1 changeover
contact

2

10

15

MCS11

Min. switching differential: 0.3 bar
Example: Cut-out pressure 8.5 bar. Cut-in pressure 4.5 bar

1 changeover
contact

8

22

25

MCS22

Min. switching differential: 0.7 bar
Example: Cut-out pressure 17.5 bar. Cut-in pressure 7.8 bar
Wall fixing bracket
For MCS & MCSN
-

360

-

eaton corporation New Zealand Product Guide

-

-

Wall mounting bracket can be rotated to right or left in 90° stages

W-MCS

Power Control
Automation & Control
SW Float switches
M00
Description

Item No.

Standard features
• Lever can be transposed to reverse contact operation
• One insulated earth terminal , one insulated N terminal
• Shroud: impact-resistant, grey
• Two cable entry knockouts for M20, without cable gland
• IP65 in conjunction with V-M20 cable gland
• Bracket for wall fixing
• Mounting position as required

SW

To be filled with sand or liquid

SK-SW

Set of accessories, without float for cable operation, consists of:
• 1 cable eye bolt
• 2 guide pulleys
• 4 cable clamps incl. screws
• 10 m steel cable (plastic sheathed)
• 1 counterweight

SBO-SW

Set of accessories, without float for rod operation, consists of:
• 1 bracket
• 3 clamp rings
• 1 operating rod (plastic 1.20 m)
• 2 hexagonal nuts (plastic)

STO-SW

With lock nut & built-in strain relief
IP68 up to 5 bar, halogen-free
External diameter of cable 6 – 13 mm

V-M20

Moulded float

Cable operation

Automation & Control

Float switch, IP65

Rod operation

Metric cable gland, M20 to EN 50 262

eaton corporation New Zealand Product Guide

361

Power Control
Automation & Control

Automation & Control

Temperature Controllers
Eaton TC Series Temperature Controllers
•	 TC series panel-mount: 24 x 48, 48 x 48 & 96 x 48 sizes
•	 Universal input: J, K, T, E, B, R, S, N, L thermocouples or Pt100 RTD
•	 Outputs available: relay, alarm, SSR, analog
•	 Supply options: 90-250V AC or 11-26V AC/DC
•	 Advanced fuzzy logic PID minimises overshoot/undershoot & allows quick accurate response
•	 Fast sampling rate up to 5 times per second ensures accuracy in fast processes
•	 Standard IP65 front panel (TC48) suitable for washdown environments
•	 Sensor break detection feature (thermocouple/RTD open, RTD short)
•	 Two bright easy-to-read 4-digit LED displays for process value & set value
•	 Heat/cool control, dwell timer function available

B57
Description

Item No.

24 x 48 size
Temp Ctrl, 24 x 48mm, 2 Relay Out, 90 – 250V AC

TC24411100

Temp Ctrl, 24 x 48mm, SSR Driver/Relay Out, 90 – 250V AC

TC24412100

Temp Ctrl, 24 x 48mm, 2 Relay Out, 11 – 26V AC/DC

TC24511100

Temp Ctrl, 24 x 48mm, Analogue Out, Relay Alarm, 90 – 250V AC

TC24413100

Process Cntrl, 24 x 48mm, Analogue/Relay Out, 90 – 250V AC

PC24463100

48 x 48 size
Temp Ctrl, 48 x 48mm, 1 Relay Out, Relay Alarm, 90 – 250V AC

TC484110101

Temp Ctrl, 48 x 48mm, SSR Driver Out, 90 – 250V AC

TC484120001

Temp Ctrl, 48 x 48mm, SSR Driver Out, Relay Alarm, 90 – 250V AC

TC484120101

Temp Ctrl, 48 x 48mm, Analogue Out, Relay Alarm, 90 – 250V AC

TC484130101

Temp Ctrl, 48 x 48mm, 1 Relay Out, Relay Alarm, 11 – 26V AC/DC

TC485110101

96 x 48 size
Temp Ctrl, 96 x 48mm, 1 Relay Out, Relay Alarm, 90 – 250V AC

362

eaton corporation New Zealand Product Guide

TC964110100

Power Control
Wiring Accessories
Feed-Through Terminals
Feed-Through Connection Terminals
(suitable for 35mm DIN Rail & 32mm G Rail)

Type

2.5mm

4mm

Current

26 amps - 750V / 24 amps - 800V

34 amps - 750V / 32 amps - 800V

Width / Strip Length /
Screw

5mm / 7mm / M2.5

6mm / 12mm / M3

Cable

0.2mm-2.5mm stranded /
0.2mm -4mm solid

0.2mm-4mm stranded /
0.2mm-6mm solid

Profile Dimensions

Profile Dimensions

Description

Reference

2.5mm
Item No.

Description

Reference

4mm
Item No.

2.5mm terminal beige

1296.0

RK2.5PA

4mm terminal beige

1001.2

RK2.5-4PA

2.5mm terminal beige 10P

1297.2

KBL2.5PA

4mm terminal beige 10P

1002.2

KBL2.5-4PA

End plate beige

2001.2

AP2.5-10PA

End section beige

2001.2

AP2.5-10PA

Partition beige

2002.2

TW2.5-10PA

Partition beige

2002.2

TW2.5-10PA

2.5mm terminal red

1296.9

RK2.5PAR

4mm terminal red

1001.9

RK2.5-4PAR

End plate red

2001.9

AP2.5-10PAR

End plate red

2001.9

AP2.5-10PAR

2.5mm terminal white

1296.7

RK2.5PAW

4mm terminal white

1001.7

RK2.5-4PAW

End plate white

2001.7

AP2.5-10PAW

End plate white

2001.7

AP2.5-10PAW

2.5mm terminal blue

1296.5

RK2.5PAB

4mm terminal blue

1001.5

RK2.5-4PAB

End plate Blue

2001.5

AP2.5-10PAB

End plate Blue

2001.5

AP2.5-10PAB

Partition blue

2002.5

TW2.5-10PAB

Partition blue

2002.5

TW2.5-10PAB

Cross Connection 2P bare

2567.0

Q.22.5

Cross Connection 2P insul.

2740.2

QI24

Cross Connection 3P bare

2568.0

Q.32.5

Cross Connection 3P insul.

2741.2

QI34

Cross Connection 10P bare

2570.0

Q.102.5

Cross Connection 10P insul.

2743.2

QI104

Cross Connection 100P bare

2152.0

Q.0.5m

Cross Connection 83P bare

2153.0

Q.0.5m4

Cover (60mm)

2499.0

ADQ

Cover (60mm)

2499.0

ADQ

External jumper insulated 10P

2029.0

AQI10/5/15

External jumper insulated 10P

2143.0

AQI10/6/17

-

-

-

External jumper insulated 75P

2480.0

AQI75/6/17

Separator

2566.2

TRS3PA

Separator

2003.2

TRS

Test Socket

2075.0

STB8.5/2.3

Test Socket

2006.0

STB14/2.3

Test Plug

2007.0

PS2.3

Test Plug

2007.0

PS2.3

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

Wiring Accessories

B16

For marking systems, refer to page 409. For mounting rails, refer to page 410.

eaton corporation New Zealand Product Guide

363

Power Control
Wiring Accessories
Feed-Through Terminals
Feed-Through Connection Terminals (suitable for 35mm DIN Rail
& 32mm G Rail)

Type

10mm

16mm

Current

61 amps - 750V / 57 amps - 800V

82 amps - 750V / 76 amps - 800V

Width / Strip Length /
Screw

8mm / 12mm / M4

12mm / 15mm / M5

Cable

0.2mm-10mm stranded /
0.2mm -10mm solid

2.5mm-16mm stranded /
2.5mm-25mm solid

Profile Dimensions

Profile Dimensions

Wiring Accessories

B16
Description

Reference

10mm
Item No.

Description

Reference

16mm
Item No.

10mm terminal beige *

1005.2

RK6-10PA

16mm terminal beige *

1050.2

RK16PA

10mm terminal beige 10P *

1006.2

KBL6-10PA

-

-

-

End plate beige *

2001.2

AP2.5-10PA

End plate beige *

2104.2

AP16PA

Partition beige *

2105.2

TW16PA

Partition beige *

2002.2

TW2.5-10PA

10mm terminal red *

1005.9

RK6-10PAR

End plate red *

2001.9

AP2.5-10PAW

10mm terminal white *

1005.7

RK6-10PAW

End plate white *

2001.7

AP2.5-10PAR

6mm terminal blue *

1005.5

RK6-10PAB

16mm terminal blue *

1050.5

RK16PAB

End plate Blue *

2001.5

AP2.5-10PAB

End plate Blue *

2104.5

AP16PAB

Partition blue *

2002.5

TW2.5-10PAB

Partition blue *

2105.5

TW16PAB

Cross Connection 2P insul.

2750.2

QI210

Cross Connection 2P bare

2112.0

Q.216

Cross Connection 3P insul.

2751.2

QI310

Cross Connection 3P bare

2113.0

Q.316

Cross Connection 10P insul.

2753.2

QI1010

Cross Connection 10P bare

2115.0

Q.1016

Cover s (60mm)

2499.0

ADQ

Cover 1P

2819.0

AD1/12

External jumper insulated 2P

2067.0

AQI2/8/11

External jumper insulated 3P

2068.0

AQI3/8/11

Separator

2003.2

TRS

Test Socket

2050.0

STB14/4

Test Plug

2051.0

PS4

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35KST

End clamp TS35 (9.5mm)

2828.0

ES35KST

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.
* Other colours available on request.

364

eaton corporation New Zealand Product Guide

Power Control
Wiring Accessories
Feed-Through Terminals
Feed-Through Connection Terminals (suitable for 35mm DIN Rail
& 32mm G Rail)

Type

35mm

50mm

Current

135 amps - 750V / 125 amps - 800V

168 amps - 1000V

Width / Strip Length /
Screw

16mm / 20mm / M5 all.

20mm / 27mm / M8 all.

Cable

2.5mm-35mm stranded /
2.5mm -50mm solid

25mm-50mm stranded /
16mm-50mm solid

Profile Dimensions

Profile Dimensions

Description

Reference

35mm
Item No.

Description

Reference

50mm
Item No.

35mm terminal beige

1494.2

RK35PA

50mm terminal beige

1120.2

RK50PA

End plate beige

2116.2

AP35PA

End plate beige

-

Not Required

Partition beige

2117.2

TW35PA

Partition grey

-

Not Required

35mm terminal blue

1494.5

RK35PAB

35mm terminal blue

1120.5

RK50PAB

End plate Blue

2116.5

AP35PAB

End section Blue

-

Not Required

Partition blue

2117.5

TW35PAB

-

-

-

Cross Connection 2P bare

2164.0

Q.235

Cross Connection 2P insul.

2763.2

AQI250

Cross Connection 3P bare

2165.0

Q.335

Cross Connection 3P bare

2764.2

AQI350

Q.1035

Cross Connection 10P bare

2167.0

Cover 1P

2820.0

AD1/16

Test Socket

2127.0

STB16/4

Test Plug

2051.0

PS4

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35KST

End clamp TS35 (9.5mm)

2828.0

ES35KST

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

Wiring Accessories

B16

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Type

95mm

150mm

Current

250 amps - 1000V

355 amps - 1000V

Width / Strip Length /
Screw

25mm / 30mm / M8 all

31mm / 38mm / M10 all.

Cable

35mm-95mm stranded /
25mm -95mm solid

35mm-150mm stranded /
35mm-185mm solid

Profile Dimensions

Profile Dimensions

B16
Description

Reference

95mm
Item No.

Description

Reference

150mm
Item No.

95mm terminal beige

1122.2

RK95PA

150mm terminal beige

1124.2

RK150PA

End plate

-

Not Required

End plate

-

Not Required

Partition

-

Not Required

Partion

-

Not Required

95mm terminal blue

1122.5

RK95PAB

150mm terminal blue

1124.5

RK150PAB

End plate

-

Not Required

End Plate

Partition

-

Not Required

-

-

Cross Connection 2P insul.

2765.2

AQI295

Cross Connection 2P insul.

2767.2

AQI2150

Cross Connection 3P bare

2766.2

AQI395

Cross Connection 3P bare

2768.2

AQI3150

-

-

-

Warning Tag

2806.0

AD1/150

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

Not Required
-

For marking systems, refer to page 409. For mounting rails, refer to page 410.

eaton corporation New Zealand Product Guide

365

Power Control
Wiring Accessories
Feed-Through Terminals

Wiring Accessories

Feed-Through Connection Terminals (suitable for 35mm DIN Rail & 32mm G Rail)

240mm

Current

453 amps - 1000V

Width / Strip Length / Screw

36mm / 38mm / M10 all.

Cable

70mm-240mm stranded / 70mm -240mm solid

Profile Dimensions

B16
Description

Reference

240mm Item No.

240mm terminal beige

1126.2

RK240PA

End plate

-

Not Required

Partition

-

Not Required

240mm terminal blue

1126.5

RK240PAB

End Plate

-

Not Required

Cross Connection 2P insul.

2769.2

AQI2240

Cross Connection 3P bare

2770.2

AQI3240

Warning Tag

2808.0

AD1/240

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.

366

HSK High Current Terminals
(available on request).

Type

eaton corporation New Zealand Product Guide

Power Control
Wiring Accessories
Earth Terminals
Through-Type Earth Terminals (Yellow/Green) (suitable for 35mm DIN Rail)
Type

2.5mm

4mm

Width / Strip Length /
Screw

6mm / 10mm / M2.5

8mm / 12mm / M3

Cable

0.2mm-2.5mm stranded /
0.2mm -4mm solid

0.2mm-4mm stranded /
0.2mm-6mm solid
Profile Dimensions

Profile Dimensions

Description

Reference

2.5mm
Item No.

Description

Reference

4mm
Item No.

2.5mm Earth terminal

1056.2

SL2.535

4mm Earth terminal

1212.2

SL435

End section not required.

Type

10mm

16mm

Width / Strip Length /
Screw

10mm / 12mm / M4

12mm / 12mm / M5

Cable

0.2mm-10mm stranded /
0.2mm-10mm solid

2.5mm-16mm stranded /
2.5mm-25mm solid
Profile Dimensions

Wiring Accessories

B16

Profile Dimensions

B16
Description

Reference

10mm
Item No.

Description

Reference

16mm
Item No.

10mm Earth terminal

1213.2

SL1035

16mm Earth terminal

1197.2

SL1635

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Type

35mm

Width / Strip Length / Screw

16mm / 20mm / M6

Cable

2.5mm-35mm stranded / 2.5mm-50mm solid

Profile Dimensions

B16
Description

Reference

35mm
Item No.

35mm Earth terminal

1199.2

SL3535

For mounting rails, refer to page 410. End section not required.

Type

2.5mm, Duo Earth Double

Width / Strip Length / Screw

6mm / 10mm

Cable

0.2mm-2.5mm stranded / 0.2mm-0.4mm solid

Profile Dimensions

Profile Dimensions

B16
Description

Reference

2.5mm
Item No.

2.5mm terminal

1060.2

SL2.535ZR

Description

Reference

2.5mm
Item No.

2.5mm terminal

1062.2

SL2.535ZR

End section

2575.1

AP2.5RLPA

For marking systems, refer to page 409. For mounting rails, refer to page 410.

eaton corporation New Zealand Product Guide

367

Power Control
Wiring Accessories
Double Deck/Duo Terminals

Wiring Accessories

Double Deck Through-Type Terminals (suitable for 35mm DIN Rail
& 32mm G Rail)

Type

4mm without Bridge

Current

34 amps - 500V

4mm with Bridge
34 amps

Width / Strip Length /
Screw

6mm / 9mm / M3

6mm / 9mm / M3

Cable

0.2mm-4mm stranded /
0.2mm-4mm solid

0.2mm-4mm stranded /
0.2mm-4mm solid
Profile Dimensions

Profile Dimensions

B16
Description

4mm
Item No.

Reference

Description

Reference

4mm
Item No.

4mm terminal beige

1020.2

RKD4PA

4mm terminal beige

1027.2

RKD4SVPA

End section beige

2101.2

AP4PA

End section beige

2101.2

AP4PA

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Duo Through-Type Connection Terminals (suitable for 35mm DIN Rail
& 32mm G Rail)

Type

4mm 1in/2out Connection

4mm 2in/2out Connection

Current

26 amps - 500V

26 amps - 500V

Width / Strip Length

6mm / 12mm

6mm / 9mm

Cable

0.2mm-4mm stranded /
0.2mm -6mm solid

0.2mm-4mm stranded /
0.2mm -6mm solid
Profile Dimensions

Profile Dimensions

B16
Description

Reference

4mm
Item No.

Description

Reference

4mm
Item No.

4mm terminal beige *

1210.2

RK2.5-4ZRPA

4mm terminal beige *

1211.2

RK2.5-4ZRLPA

End section beige *

2574.2

AP2.5RPA

End section beige *

2575.2

AP2.5RLPA

Cross Connection 2P insul.

2740.2

QI24

Cross Connection 2P insul.

2740.2

QI24

Cross Connection 3P insul.

2741.2

QI34

Cross Connection 3P insul.

2741.2

QI34

Cross Connection 10P insul.

2743.2

QI104

Cross Connection 10P insul.

2743.2

QI104

Cross Connection 83P bare

2153.0

Q0.5m

Cross Connection 83P bare

2153.0

Q.0.5m

Cover s (60mm)

2499.0

ADQ

Cover s (60mm)

2499.0

ADQ

External jumper insulated 10P

2029.0

AQI10/5/15

External jumper insulated 10P

2143.0

AQI10/6/17

-

-

-

External jumper insulated 75P

2480.0

AQI75/6/17

Separator

2566.2

TRS3PA

Separator

2003.2

TRS

Test Socket

2075.0

STB8.5/2.3

Test Socket

2006.0

STB14/2.3

Test Plug

2007.0

PS2.3

Test Plug

2007.0

PS2.3

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.
*Blue on Request.

368

eaton corporation New Zealand Product Guide

Power Control
Wiring Accessories
Disconnect Terminals
Disconnect Terminals (suitable for 35mm DIN Rail & 32mm G Rail)

Type

4mm without test socket

4mm with LH & RH test sockets

Current

10 amps

35 amps

Width / Strip Length

6mm / 8mm

6mm

Cable

0.2mm-4mm stranded /
0.2mm -6mm solid

0.5mm-4mm stranded /
0.5mm-6mm solid

Profile Dimensions

Profile Dimensions

Description

Reference

4mm
Item No.

Description

Reference

4mm
Item No.

4mm terminal beige

1390.2

TRK1.5PA

4mm terminal beige

1391.2

TRK1.5STBPA

External Jumper 2p

2064.0

AQ2

External Jumper 3p

2065.0

AQ3

External Jumper 4p

2066.0

AQ4

Test Plug

2007.0

PS2.3

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

Wiring Accessories

B16

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Type

4mm without test sockets

4mm

Current

10 / 15 amps - 300 / 600V

34 / 15 amps - 300 / 600V

Width / Strip Length

6mm / 8mm

8mm / 9mm

Cable

0.2mm-4mm stranded /
0.2mm-4mm solid

0.2mm-4mm stranded /
0.2mm -4mm solid
Profile Dimensions

B16
Description

Reference

4mm
Item No.

Description

Reference

4mm
Item No.

4mm terminal beige

1394.2

TRK1.5DSPA

4mm terminal beige

2193.2

TRK2KPA

Plug (spare)

1403.2

DS1TRK1.5

End plate beige

2046.2

APSI1PA

Diode Plug 1A

1401.2

DS1TRK1.51A
DS1TRK1.5B

Diode Plug with Bridge

1400.2

External Jumper 2p

2064.0

AQ2

End clamp Economy TS35

2005.2

ES35PA

External Jumper 3p

2065.0

AQ3

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

External Jumper 4p

2066.0

AQ4

Test Plug

2007.0

PS2.3

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Type

4mm with RH & LH test sockets

Current

10 / 15 amps - 300 / 600V

Width / Strip Length

6mm / 8mm

Cable

0.2mm-4mm stranded / 0.2mm-4mm solid
Profile Dimensions

B16
Description

Reference

4mm
Item No.

4mm terminal beige

1395.2

TRK1.5STBDSPA

eaton corporation New Zealand Product Guide

369

Power Control
Wiring Accessories
Fuse Terminals
Fuse Terminals (suitable for 35mm DIN Rail & 32mm G Rail)

Type

10mm 5 x 20mm / 5 X 25mm

10mm 6.3mm x 32mm

Width / Strip Length

8mm / 9mm

6mm / 9mm

Cable

0.2mm-10mm stranded /
0.2mm-10mm solid

0.2mm-10mm stranded /
0.2mm-10mm solid

Wiring Accessories

Profile Dimensions

Profile Dimensions

B16
Description

Reference

10mm
Item No.

Description

Reference

10mm
Item No.

terminal beige

1101.2

SIK10PA

terminal beige

1102.2

SIK10ZPA

LED - 12VDC / 24VAC

1113.2

SSTSIKLED12

LED - 30VDC / 60VAC

1114.2

SSTSIKLED30

LED - 60VDC / 120VAC

1115.2

SSTSIKLED60

LED - 115VDC / 230VAC

1116.2

SSTSIKLED115

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

Fuses to suit:
5 x 25mm:
1A

2096.0

SIK251A

2A

2097.0

SIK252A

4A

2098.0

SIK254A

6.3A

2099.0

SIK256.3A

5 x 20mm:
1A

2406.0

SIK201A

2A

2407.0

SIK202A

4A

2408.0

SIK204A

6.3A

2409.0

SIK206.3A

For marking systems, refer to page 409. For mounting rails, refer to page 410.

Fuse Terminals (suitable for 35mm DIN Rail)

Type

4mm 5mm X 20mm/25mm

10mm 5mm X 20mm/25mm

Width / Strip Length

8mm / 9mm

12mm / 12mm

Cable

0.2mm-4mm stranded /
0.2mm-4mm solid

0.2mm-10mm stranded /
0.2mm-10mm solid
Profile Dimensions

Profile Dimensions

B16
Description

Reference

4mm
Item No.

Description

Reference

10mm
Item No.

4mm terminal

2190.2

STK1PA

10mm terminal

1092.6

SK135

End section

2046.2

APSI1PA

End section

2047.6

APSK1KRG

End clamp Economy TS35

2005.2

ES35PA

End clamp Economy TS35

2005.2

ES35PA

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp TS35 (9.5mm)

2828.0

ES35SKT

End clamp metal TS35 (11mm)

2761.9

HES35ST

End clamp metal TS35 (11mm)

2761.9

HES35ST

For marking systems, refer to page 409. For mounting rails, refer to page 410.
For fuses see above.

370

eaton corporation New Zealand Product Guide

Power Control
Wiring Accessories
Marking Tags
Terminal SB Marking Tag Branches (each branch with 10 tags)

B16
Reference

5mm width,
Item No. *

6mm width,
Item No.

Reference

Reference

8mm width,
Item No.

1 - 10

2433.0/1-10

SB510FS1-10

2037.0/1-10

SB610FS1-10

2942.0/1-10

SB810FS1-10

11- 20

2433.0/11-20

SB510FS11-20

2037.0/11-20

SB610FS11-20

2942.0/11-20

SB810FS11-20

21 - 30

2433.0/21-30

SB510FS21-30

2037.0/21-30

SB610FS21-30

2942.0/21-30

SB810FS21-30

31 - 40

2433.0/31-40

SB510FS31-40

2037.0/31-40

SB610FS31-40

2942.0/31-40

SB810FS31-40

41 - 50

2433.0/41-50

SB510FS41-50

2037.0/41-50

SB610FS41-50

2942.0/41-50

SB810FS41-50

51 - 60

2433.0/51-60

SB510FS51-60

2037.0/51-60

SB610FS51-60

2942.0/51-60

SB810FS51-60

61 - 70

2433.0/61-70

SB510FS61-70

2037.0/61-70

SB610FS61-70

2942.0/61-70

SB810FS61-70

71 - 80

2433.0/71-80

SB510FS71-80

2037.0/71-80

SB610FS71-80

2942.0/71-80

SB810FS71-80

81 - 90

2433.0/81-90

SB510FS81-90

2037.0/81-90

SB610FS81-90

2942.0/81-90

SB810FS81-90

91 - 100

2433.0/91-100

SB510FS91-100

2037.0/91-100

SB610FS91-100

2942.0/91-100

SB810FS91-100

Blank

2430.0

SB510

2035.0

SB610

2940.0

SB810

Wiring Accessories

Nos.

* Tag quantity - price is for one strip of 10 tags.
Terminal AS Marking Tag Branches (each strip with 10 tags)

AS310 Marking branches white polyamide with Black print
(colours available on request).

B16
Description

Reference

Item No. *

Description

Reference

Item No.

Letter A

2573.0-A

AS310G-A

Letter O

2573.0-O

AS310G-O

Letter B

2573.0-B

AS310G-B

Letter P

2573.0-P

AS310G-P

Letter C

2573.0-C

AS310G-C

Letter Q

2573.0-Q

AS310G-Q

Letter D

2573.0-D

AS310G-D

Letter R

2573.0-R

AS310G-R

Letter E

2573.0-E

AS310G-E

Letter S

2573.0-S

AS310G-S

Letter F

2573.0-F

AS310G-F

Letter T

2573.0-T

AS310G-T

Letter G

2573.0-G

AS310G-G

Letter U

2573.0-U

AS310G-U

Letter H

2573.0-H

AS310G-H

Letter V

2573.0-V

AS310G-V

Letter I

2573.0-I

AS310G-I

Letter W

2573.0-W

AS310G-W

Letter J

2573.0-J

AS310G-J

Letter X

2573.0-X

AS310G-X

Letter K

2573.0-K

AS310G-K

Letter Y

2573.0-Y

AS310G-Y

Letter L

2573.0-L

AS310G-L

Letter Z

2573.0-Z

AS310G-Z

Letter M

2573.0-M

AS310G-M

Letter +

2573.0-PLUS

AS310G-PLUS

Letter N

2573.0-N

AS310G-N

Letter -

2573.0-MINUS

AS310G-MINUS

* Tag quantity - price is for one strip of 10 tags.

B16
Description

Reference

Nos. Sequence 0…..9

2572.0

Item No. *

Description

Reference

Item No.

Tag Mounting Clip

No .1

2573.0-1

AS310G-1

3 way 9.5mm

2616.0

SCHT3

No .2

2573.0-2

AS310G-2

4 way 12.5mm

2617.0

SCHT4

No. 3

2573.0-3

AS310G-3

5 way 15.8mm

2618.0

SCHT5

No. 4

2573.0-4

AS310G-4

6 way 19mm

2619.0

SCHT6

No. 5

2573.0-5

AS310G-5

No. 6

2573.0-6

AS310G-6

No. 7

2573.0-7

AS310G-7

No. 8

2573.0-8

AS310G-8

No. 9

2573.0-9

AS310G-9

No. 0

2573.0-0

AS310G-0

Blank

2571.0

AS310

* Tag quantity - price is for one strip of 10 tags.

eaton corporation New Zealand Product Guide

371

Power Control
Wiring Accessories
DIN Rail & Ducting

Slotted - closed (2m lengths)

Terminal Accessories

Wiring Accessories

TS357.5

ES35PA

ES35SKT

HES35ST

B16
Description

Reference

Item No.

35mm DIN 7.5mm high

2026.00

TS357.5US

35mm DIN 7.5mm high slotted

2094.00

TS357.5S

Mounting Rails (2 Metre length)

End Clamps
End clamp Economy

2005.20

ES35PA

Type TS35 ( 35mm)

2828.0

ES35SKT

End clamp metal (11mm)

2761.9

HES35ST

B23

Dimensions (W x H mm)

Colour

Item No.

25 x 60

Grey

FBC2560G

40 x 40

Grey

FBC4040G

40 x 60

Grey

FBC4060G

40 x 80

Grey

FBC4080G

60 x 60

Grey

FBC6060G

60 x 80

Grey

FBC6080G

80 x 80

Grey

FBC8080G

100 x 100

Grey

FBC100100G

25 x 30

Black

FBC2530B

25 x 60

Black

FBC2560B

40 x 40

Black

FBC4040B

40 x 60

Black

FBC4060B

40 x 80

Black

FBC4080B

60 x 60

Black

FBC6060B

60 x 80

Black

FBC6080B

80 x 80

Black

FBC8080B

100 x 100

Black

FBC100100B

Dimensions (mm)

Colour

Item No.

25

Grey

FBL25G

40

Grey

FBL40G

60

Grey

FBL60G

80

Grey

FBL80G

100

Grey

FBL100G

25

Black

FBL25B

40

Black

FBL40B

60

Black

FBL60B

80

Black

FBL80B

100

Black

FBL100B

Wiring Duct, Surface Mounting
Wiring duct available in slotted closed & open
or solid wall variations.
•	
•	
•	
•	

Spare Duct Lids

High impact strength
Self extinguishing 94V - 0 PVC
Service temperature 850C
Ducting comes with lids

Slotted - open (2m lengths)

372

B23

Dimensions (W x H mm)

Colour

Item No.

25 x 30

Grey

FBO2530G

25 x 40

Grey

FBO2540G

25 x 60

Grey

FBO2560G

40 x 40

Grey

FBO4040G

40 x 60

Grey

FBO4060G

40 x 80

Grey

FBO4080G

60 x 40

Grey

FBO6040G

60 x 60

Grey

FBO6060G

60 x 80

Grey

FBO6080G

80 x 60

Grey

FBO8060G
FBO8080G

80 x 80

Grey

100 x 100

Grey

FBO100100G

25 x 30

Black

FBO2530B

25 x 60

Black

FBO2560B

40 x 40

Black

FBO4040B
FBO4060B

40 x 60

Black

40 x 80

Black

FBO4080B

60 x 60

Black

FBO6060B
FBO6080B

60 x 80

Black

80 x 80

Black

FBO8080B

100 x 100

Black

FBO100100B

eaton corporation New Zealand Product Guide

B23

Power Control
Wiring Accessories
Cable Accessories

Cable Tie Saddles
•	

•	
•	
•	
•	
•	

UL approved nylon 66, 94V-2
One piece design ensures strong locking
Service temperature -400C to +1050C
High temperature 1850C, 94V-0 available
on request
Packed quantity 100

•	

Available in screw-in
or stick-on
Colour - white

Cable Tie Saddles

B23

Cable Ties, Surface Mounting

B23

Bundle Diameter
(mm)

Dimensions (mm)

Mounting

Colour

Tensile strength
(kgs)

Item No.

19 x 9.5

Screw-on

FBTM0

100 x 2.5

Clear

8

25

FBCT1002C

15 x 10

Screw-on

FBTM1

190 x 4.8

Clear

22

52

FBCT1904C

23 x 16

Screw-on

FBTM2

280 x 4.8

Clear

22

81

FBCT2804C

21 x 21

Stick-on only

FBTM21214

370 x 4.8

Clear

22

102

FBCT3704C

28 x 28

Stick-on + screw-on

FBTM28284

280 x 7.6

Clear

55

81

FBCT2807C

380 x 7.6

Clear

55

110

FBCT3807C

450 x 7.6

Clear

55

120

FBCT4507C

450 x 8.0

Clear

80

133

FBCT4508C

550 x 8.0

Clear

80

168

FBCT5508C

812 x 9.0

Clear

80

246

FBCT8129C

1168 x 9.0

Clear

80

360

FBCT11689C

100 x 2.5

Black

8

25

FBCT1002B

150 x 3.6

Black

18

39

FBCT1503B

190 x 4.8

Black

22

52

FBCT1904B

280 x 4.8

Black

22

81

FBCT2804B

370 x 4.8

Black

22

102

FBCT3704B

280 x 7.6

Black

55

81

FBCT2807B

380 x 7.6

Black

55

110

FBCT3807B

450 x 7.6

Black

55

120

FBCT4507B

450 x 8.0

Black

80

133

FBCT4508B

550 x 8.0

Black

80

168

FBCT5508B

1168 x 9.0

Black

80

360

FBCT11689B

Dimensions
(mm)

Item No.

eaton corporation New Zealand Product Guide

Wiring Accessories

Cable Ties

373

Power Control
Wiring Accessories
Cable Accessories

Cable Glands

Spiral Banding

•	
•	

•	

Manufactured from P.E.
Binds cables & protects them
from damage

•	
•	
•	

Manufactured from UL approved
nylon 66 94V-2 black
Temperature -400C to +1050C
“Cable grab claw” stays on gland
body to reduce installation time
IP68 rating

B23

Wiring Accessories

B23

Suits cable
outside dia.

Item No.

5 - 10

FBAG16

Wrapping range
(mm)

Band width

Dia. (inner)

Dia. (outer)

Item No.

16

4 - 50

7.0

4.0

6.0

FBSW06

20

6 - 13

FBAG20

6 - 60

10.8

6.0

8.0

FBSW08

25

10-18

FBAG25

FBSW10

32

16 - 22

FBAG32

FBSW12

40

20 - 27

FBAG40

30 - 41

FBAG50

40 - 53

FBAG63

7.5 - 60
9 - 65

11.4

7.5

13.9

9.0

10
12

12 - 75

15

12

15

FBSW15

50

15 - 100

18.2

15

19

FBSW19

63

Flexible Bushing

•	
•	
•	

Cut to suit any shape hole
Protects cables from
sharp edges
Manufactured P.E. Natural

B23

374

Thread size,
metric, (mm)

Thickness

Max. Thickness

1.0

1.0

Item No.
FBMB10

1.6

1.0 - 1.6

FBMB16

2.4

1.6 - 2.4

FBMB24

3.2

2.4 - 3.2

FBMB32

4.5

3.2 - 4.5

FBMB45

eaton corporation New Zealand Product Guide



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2012:05:07 13:39:59+08:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2012:05:07 13:40:39+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:05:07 13:40:39+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Format                          : application/pdf
Document ID                     : uuid:92e1dc55-485c-43a6-9a4a-ba41e4f87492
Instance ID                     : uuid:a1285ef0-992f-4972-96e3-d3d51ba04b90
Producer                        : Adobe PDF Library 9.9
Page Count                      : 192

EXIF Metadata provided by EXIF.tools