Philips Electronics M095 User Manual 59839

Download:
Mirror Download [FCC.gov]
Document ID	59839
Application ID	Qt16qp5CziUIo+c8WoRgCA==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	99.53kB (1244170 bits)
Date Submitted	1999-09-21 00:00:00
Date Available	1999-10-13 00:00:00
Creation Date	2001-05-31 18:16:27
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-31 18:16:57
Document Title	59839.pdf
Document Author:	VicodinES /CB /TNN

FCC ID: A3KM095
Exhibit 5
INSTALLATION AND OPERATING
INSTRUCTION
Contents: Dell ISOlFP Flat Panel Color Monitor User's Guide Page 1 of]
RegulatoryNotices
Documentation
Information in this document is subject to change without notice.
© 1999 Dell Computer Corporation. All right reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is
strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation; MS-
DOS , Microsoli . andaws ,and Windows NT are registered trademarks of Microsoft Corporation; VESA
is a registered trademark of Video Electronics Standards Association; IBM is a registered trademark of
International Business Machines Corporation: Adobe is a trademark of Adobe Systems Incorporated,
which may be registered in certain jurisdictions. As an ENERGY STAR Partner, Dell Computer Corporation
has determined that this product meets the ENERGY STAR guidelines lor energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entitles claiming the
marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in
trademarks and trade names other than its own.
Initial release: 15 Nov 99
Preface: Dell 1501FP Flat Panel Color Monitor User's Guide Page 1 of 1
Preface: DellTM 1501FP Flat Panel Color Monitor User's
Guide
About This Guide
This guide is intended for anyone who uses the Dell 1501 PP Flat Panel Color Monitor. It
describes the monitor's features, setup, and operation.
The sections are as follows:
0 Safety Instructions lists safety information.
. Introduction gives an overview of the monitor's features and provides an orientation
to the monitor.
Setup describes the initial setup process.
Using the Monitor gives an overview of how to use the monitor.
Troubleshooting provides tips and solutions for common problems.
Specifications lists the technical specifications of the monitor.
Regulatory lists regulatory certifications and notices.
Warranty describes the warranty information for this product.
Documentation provides additional documentation that supports this product.
Notational Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold
type or in italic type. These blocks are notes, cautions, and warnings, and they are used
as follows:
(i; NOTE: A NOTE indicates important information that helps you make better use of
your computer system.
] CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
A WARNING: A WARNlNG indicates the potential for bodily harm and tells you
how to avoid the problem.
Some warnings may appear in alternate formats and may be unaccompanied by an icon.
In such cases, the specific presentation of the warning is mandated by regulatory
authority.
ll
ll
ll
ll
‘I
ll
ll
ll
Safety Instructions: Dell 1501FP Flat Panel Color Monitor User's Guide Page 1 012
Back to contents Page
Safety Instructions: DellTM 1501FP Flat Panel Color
Monitor User's Guide
WARNING: Use of controls, adiustments, or procedures other than these
A specified in this documentation may result in exposure to shock, electrical
hazards, andlor mechanical hazards.
Read and follow these instructions when connecting and using your computer
monitor:
- To help avoid damaging your computer, be sure that the voltage selection
switch on the power supply is set to match the alternating current (AC) power
available at your location:
0 115 volts (V)!60 hertz (Hz) in most of North and South America and some
Far Eastern countries such as Japan, South Korea, and Taiwan.
0 230 V150 Hz in most of Europe, the Middle East, and the Far East
Also be sure that your monitor is electrically rated to operate with the AC power
available in your location.
- Never insert anything metallic into the monitor openings. Doing so may create
the danger of electric shock.
. To avoid electric shock, never touch the Inside of the monitor. Only a qualified
technician should open the monitor's case.
. Never use your monitor if the power cable has been damaged. Do not allow
anything to rest on the power cable, and keep the cable away from where people
could trip over it.
- Be sure to hold the plug, not the cable. when disconnecting the monitor from an
electric socket.
- Openings in the monitor cabinet are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered. Also, avoid
using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block
the ventilation openings in the bottom of the cabinet. if you put the monitor in a
bookcase or some other enclosed space, he sure to provide adequate
ventilation.
. Put your monitor in a location with low humidity and a minimum of dust. Avoid
places like damp basement or dusty hallways.
. Do not expose the monitor to rain or use it near water (in kitchens, next to
swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact
an authorized dealer immediately. You can clean the monitor with a damp cloth
when necessary, but be sure to unplug the monitor first.
. Place the monitor on a solid surface and treat it carefully. The screen is made of
glass and can be damaged if dropped or sharply hit.
. Locate your monitor near an easily accessible electric outlet.
. If your monitor does not operate normally - in particular, if there are any unusual
Safety Instructions: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 2 of 2
sounds or smells coming from It - unplug it immediately and contact an
authorized dealer or service center.
- High temperatures can cause problems. Don't use your monitor in direct
sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of
heat.
- Unplug the monitor when it is going to be left unused for an extended period of
time.
- Unplug your monitor from the electric outlet before any service.
Back to Contents Page
Intro: Dell 1501FP Flat Panel Color Monitor User's Guide Page 1 of2
lntroduction: DellTM 1501FP Flat Panel Color Monitor
User's Guide
Overview - Features ~ Graphics
Overview
Congratulations on purchasing the Dell 1501FP Flat Panel color monitor. The 1501 FP
satisfies the need of high—end corporate and professional users. This monitor is for those
who are seeking advanced design, a small footprint, high quality picture and ergonomic
features in a monitor that takes minimal desk space. Its innovative technology delivers
outstanding viewing angle and picture quality, zero emissions, dual input (Analog and
Digital), and low-energy consumption.
Features
The 1501FP Flat Panel color monitor has the following features:
. Optimal Resolution & Refresh 1024 x 768 at 60 Hz
' vus (Viewable image Size) 15.0 inches / 15.1 inches
' wee" Type Active Matrix - TFT LCD
- Pixel Dot Pitch 0.297 x 0.297 mm / 0.300 x 0.300 mm
' Faceplate coatlng Anti-glare with hard coating 2H
0 Physical Size (Height x Width x
Depth) 400 mm x 386.4 mm x 179.8 mm (15.7
inches x 15.2 inches x 7.1 inches)
- Weight (monitor only) 5.7 kg (12.5 lbs)
. Weight (with packaging) 72 kg (16.1 lbs)
For more details see Specifications Section.
Graphics
The following links show various views of the monitor and its components.
Front View
Back View
Intro: Dell ISOIFP Flat Panel Color Monitor User's Guide Page 2 of2
Bottom Vjew
Side Vlevy
Front View: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of]
Front View: DellTM 1501 FP Flat Panel Color Monitor
User's Guide
4 Power button @
. Power Indicator
. OSD button a
4. @ / (3 buttons
5. g I S39 buttons (Brightness hotkey)
6. ®Auto button
1 hi
Back View: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of 1
Back View: DelIT"I 1501 FP Flat Panel Color Monitor
User's Guide
The signal cable is detachable.
Side View: Dell 1501FP Flat Panel Color Monitor User's Guide Page 1 of 1
Side View: Dell” 1501 FP Flat Panel Color Monitor
User's Guide
1. Location of the serial number label.
Setup: Dell 1501FP Flat Panel Color Monitor User's Guide Page 1 of 1
Setup: DeIIT“ 1501FP Flat Panel Color Monitor User's
Guide
Till/Swivel Base
Attaching the Cables
Positioning the Monitor
Maintenance
Tilt/Swivel Base: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of 1
Tilt/Swivel Base: DellTM 1501 FP Flat Panel Color
Monitor User's Guide
. ,
Pedestal
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable
viewing angle.
Attaching the Cables: Dell lSOlFP Flat Panel Color Monitor User‘s Guide Page 1 of 2
w. a f. . {up
Attaching the Cables: DellTM 1501 PP Flat Panel Color
Monitor User's Guide
Cable Connections On Back of Monitor and Computer
1. Turn off your computer and unplug its power cord.
2. Connect Analog cable signal to Flat Panel if you prefer to use Analog instead of
Digital. Do no use both Analog and Digital at the same for one computer.
3. A. For Digital Input:
Attach DVl—D signal cable to digital input port on the back of your computer for
digital video connection. Do not connect both digital and analog connector, you
only need one signal cable to support one computer.
B. For Analog Input:
Attach Analog signal cable to analog input port on the back of your computer. Do
not attach digital signal cable, you only need one signal cable to support one
computer.
Tighten the connector screws finger-tight. Do not overtighten.
Attaching the Cables: Dell 1501 PP Flat Panel Color Monitor User's Guide Page 2 of2
Connect power cord of your monitor to the power port on the back of the monitor.
Plug power cords of your computer and your monitor into a nearby outlet.
Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an
image, see Troubleshooting.
$95”?
Position: Dell 1501 PP Flat Panel Color Monitor User‘s Guide Page 1 of1
Positioning the Monitor: DelIT'"I 1501 FP Flat Panel Color
Monitor User's Guide
Consider the following environmental factors when you are deciding how to position the
monitor:
0 Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or
extreme cold.
0 Avoid moving the LCD monitor between locations with large temperature
differences. Choose a site falling within the following temperature and humidity
ranges.
0 Temperature: 5“ to 35°C (41° to 95°F)
0 Humidity: 80% max. (non-condensing)
0 Do not subject the LCD monitor to severe vibration or high impact conditions. Do
not place the LCD monitor inside a car trunk.
- Do not store or use the LCD monitor in locations exposed to high humidity or dusty
environment. Also do not allow water or other liquids to spill on or into the LCD
monitor.
Maintenance: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of1
~\
Maintenance: DellTM 1501 FP Flat Panel Color Monitor
User's Guide
WARNING: To avoid risk of electric shock, do not disassemble the monitor
cabinet (except for gaining access to the cable connectors as described in
are ,, ya; m table's). Users cannot service the monitor. User maintenance is
restricted to cleaning.
(3 NOTE: Before cleaning the monitor, unplug it from the electrical outlet
- To clean your flat panel display screen, lightly dampen a soft, clean cloth with water
or isopropyl alcohol. Never use methyl or ethyl alcohol, benzene, thinner, ammonia,
abrasive cleaners, or compressed air; theses substances could damage the
crystals that make up the flat panel display.
- To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.
. Wipe off stubborn stains from the cabinet with a cloth lightly dampened in isopropyl
alcohol. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
alr.
Using Monitor: Dell lSOIFP Flat Panel Color Monitor User's Guide Page 1 of1
Using the Monitor: DellTM 1501FP Flat Panel Color
Monitor User's Guide
Settlng the Optimal Resolution
Controls and |ndlCalQ[§
Optimal Resolution: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of]
Setting the Optimal Resolution: DellTM 1501 FP Flat
Panel Color Monitor User‘s Guide
For optimal monitor perfomianoe while using the Microsofl® Vihndows® 95, Vifindows 98,
or Windows NT® operating systems, set the display resolution to 1024 x 768 pixels by
performing the following steps:
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Display icon in the Control Panel window, and then click the
Settings tab.
3» In the Desktop area, move the slidebarto 1024 by 768 pixels. Then click OK.
Controls: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 1 of 13
Controls and Indicators: DelllM 1501 FP Flat Panel Color
Monitor User's Guide
gig/lent! System - AutomaticiSave - fleet Features '
hthcalors
Overview
Use the control buttons on the front of the monitor to adjust the characteristics of the
image being displayed. As you use these buttons to adjust the controls, an on-screen
display (OSD) shows their numeric values as they change.
1 {Q Power button switches your monitor on.
2 Power indicator
3 Q OK button which when pressed will take you
to the OSD controls.
4 @@ LEFT and RlGHT buttons, like the UP and
DOWN buttons, are also used in adjusting
the OSD of your monitor.
5 .@ UP and DOWN buttons are used when
** adjusting the OSD of your monitor.
These buttons are also direct access buttons
for >'~: ~_ . ; control.
6 @ AUTO button which when pressed will
perform the AUTO /\tl_ltlSlm§3jlt to optimize
the display settings for use with your
computer.
On Screen Display (OSD) Menu System
The OSD Tree
Controls: Dell 1501 PP Flat Panel Color Monitor User's Guide Page 2 of13
rim ma 5mm we
, LANGUAGE “Vfiw'fifffi—lf ENGLISH
j swim.
FRANCAIS
DEUTSCH
l ., l'TAlJANO
“ lfl “a
AD usr POSITION -»-m«v~ — HORIZONTAL
I [ VEle CAI.
BRIGHTNESS a CONTRAST w BRIGHTNESS
WW Mam; win! “VIM t... CONTRA“
. BNGHTNESS —~ BRlGHTNESS
; afar lelfll was ”my;
lwvrosomiss ~PHASE
st [UK/fog my. my, CLOCK
ADJUST coma , ————————————————— M ORIGINAL PANEL coma
WWW WWW. 930m ron GENERAL use
55m: FOR IMAGE MANAGEMENT
USER PRESET
~ RED
l GREEN
5 ~ ewe
: — oso SETflNGS fl— ~ ——4~—» HORIZONTAL
, VERTICAL
1 - RESET TO FACTORY SETTINGS
l——— INPUT SELECTlON ~—~W————,~ ANALOG
‘m DlGITAL
! aosz MAIN CONTROLS
Direct-Access Function
m__z
Brightness: l Brightness is the overall intensity of the light coming
from the screen. A 50% brightness' ls recommended
Brightness can be accessed through the OSD (see
a. igbtness and Contrast) or use the direct access
instructions below:
LthrtllNl‘n‘.
1. Vlfith the OSD off, press the aor 0 button on
the monitor. The BRIGHTNESS window
appears.
2. Press the g or @ button to adjust the
brightness.
3. When the brightness is adjusted to the level
desired, stop pressing the Q or obutton and
after three seconds the BRIGHTNESS window
will disappear with the new adjustment saved.
, Auto Adjustment:
The Auto Adjustment function optimizes automatically
the display settings, including horizontal position,
vertical position, phase, and clock, for use with your
computer.
Controls: Dell lSOlFP Flat Panel Color Monitor User's Guide Page 3 of 13
— 1. Press the 0 button on the monitor to activate
the AUTO ADJUSTMENT function. The Attention
message of waiting for automatic adjustment .
appears.
2. The message will disappear when the monitor is
properly adjusted. ‘
3. Choose YES to keep the new setting or NO to
restore the previous settings.
Accessing the Menu System
1. Vifith the menu off, push the a button to open the menu system and display the
main features menu.
r VI :
use lozunl ran nest “sun
2. Push the Q and @ buttons to move between the function items.
3. Push the 8 button once to activate the adjustment function; then use the gig or
@/Q} buttons to make your changes.
4. Push the 0 button to confirm your selection and return to MAIN CONTROLS
window to select another function or push the a button to exit from the OSD.
For Analog Input:
1st level I 2nd level Descripfion
Language:
The 080 shows its settings in one of six languages.
n m n r N we The default is English, but you can select French,
Spanish, German, ltalian, or Japanese.
oiusr
1. Press the button on the monitor. The MAIN
Controls: Dell 1501FP Flat Panel Color Monitor User's Guide
err-mac.
Risk!
lUNr
incur
(l Ha ur rumrs
$8 Nuut’ srtFLTert-J rum
rumor-5L
Esranm.
"mucus
usurscu
inunm
E3-
00 nov: SELRC‘NON mu
0 not; re NAIN CDNYROLS
Page 4 ofl3
1. Press the C button on the monitor. The MAIN
CONTROLS window appears. LANGUAGE
should be highlighted.
2. Press the 0 button again. The LANGUAGE
window appears.
3. Press the ® or 6 button until the desired
language is highlighted.
4. Press the a button to confirm your selection
and return to MAIN CONTROLS window.
CLOSE MAIN CONTROLS will be highlighted.
5. Press the a button to exit OSD or press the Q
button to select other functions.
an sFrTriic.)
u rur
es re
NCe
nun/lino AT no .‘ “organ“:
usE IO'IAx‘llrl Fol 5:51 nEsuLT
fill VERTICAL
. BACK TO MAIN couraou
HORIZONTAL under ADJUST POSITION shifts the
image on your screen either to the left or right.
VERTICAL shifts the image on your screen either up
or down. Use this feature if your image does not
appear centered.
1. Press the a button on the monitor. The MAIN
CONTROLS window appears.
2. Press the @ button until ADJUST POSITION is
highlighted.
3. Press the 0 button . The ADJUST POSITION
window appears. HORIZONTAL should be
highlighted.
4. Press the Q or @ button to move the image to
the left or right.
5. When the horizontal position is adjusted, press
the a button to return to MAIN CONTROLS
window, or press the Q to highlight VERTICAL.
6. To adjust the vertical position, press a or Q.
button.
7. When the vertical position is adjusted, press the
Q button to return to MAIN CONTROLS
window. CLOSE MAIN CONTROLS will be
highlighted.
8. Press the g button to exit OSD or press the 6
button to select other functions.
Brightness &
contrast:
Hmll, mm | «m...
-. lawnueut
Ll'llL‘fii urtiuN
1 n
(r
Err N
to (v w
nwur ‘ Open and select the
PDF file.
{X NOTE: PDF files require Adobe Acrobat Reader, which can be
downloaded from the Adobe nglq Wide Website.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:31 18:16:27
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 59839.pdf
Modify Date                     : 2001:05:31 18:16:57-04:00
Page Count                      : 45

EXIF Metadata provided by EXIF.tools