Physik Instrumente Datasheet C 413

C-413_Datasheet C-413 PIMag® Motion Controller

User Manual: Physik Instrumente C-413 PIMag® Motion Controller

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

C-413
PIMag® Motion Controller
Control of Force, Position and Velocity

 1 or 2 motor channels
 Up to 4 sensor channels for 2 force and 2
position sensors each
 Depending on version, TCP/IP or USB
interface for configuration and sending
commands
 Depending on version, real-time SPI
interface for sending commands
 Digital inputs and outputs
 Optional analog inputs and outputs

Digital motion controller for PIMag® Voice Coil drives
C-413.1: 1 motor channel, 2 sensor channels, for the V-275 and V-277 linear actuators; C-413.2: 2 motor
channels, 4 sensor channels. PID controller for force, position, velocity. Servo update rate selectable
between 5 to 10 kHz
Force control
The force control allows operation of PIMag® drives and stages with a defined holding or feed force. The
force and position sensors can be read simultaneously and the values processed. In addition to pure force
control, subordinate position and velocity control is also an option. PI offers PIMag® actuators with a force
sensor. The C-413.20A / .2GA models enable external force sensors to be read via analog inputs
Extensive functionality
Data recorder: Recording of operating data such as motor current, velocity, position or position error. Wave
generator: Saves and outputs periodical motion profiles. Auto-zero function defines the holding current, at
which the drive outputs a force of 0 N in open-loop operation, e.g., for compensating the weight force. ID
chip support: Identifies the connected stages and simplifies configuration and exchangeability. Supports
direction-sensing reference point switches. Extensive software support, e.g., for LabVIEW, dynamic libraries
for Windows and Linux.
Interfaces
Depending on the version, commanding via TCP/IP, USB 2.0, SPI. Digital inputs and outputs for automation.
Optional analog inputs and outputs, e.g., for sensors, commanding or position feedback

16.02.2017
11:49

Related and Compatible Products
Related products
C-891 PIMag® Motion Controller
Suitable for the following mechanics
V-273 PIMag® Voice Coil Linear Actuator
V-275 PIMag® Voice Coil Linear Actuator
V-277 PIMag® High-Load Linear Actuator
V-522 • V-524 • V-528 High-Dynamics PIMag® Linear Stage

Specifications
C-413.1G

C-413.20 / C-413.20A
C-413.2G / C-413.2GA

Function

PIMag® motion controller for voice coil
drives, 1 channel, housed device

Motor channels
Sensor channels

1
2

PIMag® motion controller for voice coil
drives, 2 channels
C-413.20/.20A: OEM board
C-413.2G/.2GA: Housed device
2
4

PID controller for force, position and
velocity; parameter changing during
operation
100 µs to 200 µs, selectable in 4 steps

PID controller for force, position and
velocity; parameter changing during
operation
100 µs to 200 µs, selectable in 4 steps
Trapezoid velocity profile, specification of
the maximum velocity and acceleration

Encoder input

Trapezoid velocity profile, specification
of the maximum velocity and
acceleration
SPI sensor interface

Reference point switches

2 × TTL, direction-sensing

4 × TTL, direction-sensing

Max. output voltage

24 V

24 V

Max. output current

±1.5 A (closed loop)

±1.5 A (closed loop)

TCP/IP
Sub-D 9 (f) for motor, Sub-D 25 (f) for
sensor
2 × analog output, -10 to 10 V, 17 bit, 1
kHz
4 × digital input, 24 V
6 × digital output, 24 V

USB 2.0, real time SPI
Sub-D 15 (f) combined for motor and
sensor
2 × analog input, -10 to 10 V, 16 bit, 1 kHz
(only .20A and .2GA)
2 × analog output, -10 to 10 V, 17 bit, 1
kHz (only .20A und .2GA)
6 × digital outputs (open collector,
voltage range 5 V to 24 V, 33 kΩ internal

Motion and control
Servo characteristics
Servo cycle time
Profile generator

SPI sensor interface

Electrical properties

Interfaces and operation
Communication interfaces
Motor / sensor connection
I/O port

16.02.2017
11:49

C-413.1G

C-413.20 / C-413.20A
C-413.2G / C-413.2GA

Command set

PI General Command Set (GCS)

pull-up to 5 V)
4 × digital input (5 V TTL level, to 24 V
max. input voltage, 10 kΩ input
resistance)
PI General Command Set (GCS)

User software

PIMikroMove, PITerminal

PIMikroMove, PITerminal

Software drivers

LabVIEW driver, dynamic libraries for
Windows and Linux
Point-to-point motion, data recorder,
function generator, auto zero, ID chip
detection

LabVIEW driver, dynamic libraries for
Windows and Linux
Point-to-point motion, data recorder,
wave generator, auto zero, ID chip
detection

Max. current consumption

24 V DC from external power supply
(included)
2A

24 V DC from external power supply
(included)
2A

Operating temperature range

5 to 50°C

5 to 50 °C

Mass

0.3 kg

0.3 kg

Dimensions

210 mm × 28 mm × 105 mm

189 mm × 28 mm × 105 mm (.2G/.2GA)
160 mm × 18 mm × 100 mm (.20/.20A)

Supported functions
Miscellaneous
Operating voltage

Ordering Information
C-413.1G
PIMag® Motion Controller, 1 Channel, Benchtop Device, Force Control Option
C-413.20
PIMag® Motion Controller, 2 Channels, USB Interface, OEM Board, Force Control Option
C-413.20A
PIMag® Motion Controller, 2 Channels, USB Interface, Analog Inputs, OEM Board, Force Control
Option
C-413.2G
PIMag® Motion Controller, 2 Channels, USB Interface, Benchtop Device, Force Control Option
C-413.2GA
PIMag® Motion Controller, 2 Channels, USB Interface, Analog Inputs, Benchtop Device, Force Control
Option
Ask about custom designs!

16.02.2017
11:49



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Comments                        : 
Company                         : PI
Create Date                     : 2017:02:16 11:52:20+01:00
Keywords                        : R1
Modify Date                     : 2017:02:16 11:52:21+01:00
Source Modified                 : D:20170216105038
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2017:02:16 11:52:21+01:00
Creator Tool                    : Acrobat PDFMaker 10.1 für Word
Document ID                     : uuid:08ff75de-d8e9-4a6d-ab1c-5e9e0e7b5b73
Instance ID                     : uuid:8647ac8f-db67-48d0-84af-7bd9e57493ea
Format                          : application/pdf
Title                           : Datasheet Template
Description                     : 
Creator                         : 
Producer                        : Adobe PDF Library 10.0
Page Layout                     : OneColumn
Page Count                      : 3

EXIF Metadata provided by EXIF.tools