Primax Electronics C50-6AT05 TX Wireless Charger User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2117115
Application ID	iHUo/C+p7ZW33Yip8OOUHA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.63kB (295397 bits)
Date Submitted	2013-11-12 00:00:00
Date Available	2013-11-12 00:00:00
Creation Date	2013-07-02 14:00:09
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-07-02 14:00:09
Document Title	Microsoft Word - Primax_Philips Charging Pad User manual_V0.2_20130702
Document Creator	PScript5.dll Version 5.2.2
Document Author:	xiaoping.chu

Wireless Charging Pad User Manual
Safety information
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device
We cannot be held responsible for any injury or property damage caused by failure
to comply with the safety cautions and regulations
Do not use damaged power cords or plugs, or loose electrical sockets
Do not touch the power cord with wet hands or disconnect the charger by pulling
the cord
Do not bend or damage the power Cord
Do not store your device with metal objects, such as coins, keys, and necklaces
Your device may overheat.
Do not use your device for a while if the device is overheated
Prolonged exposure of your skin to an overheated device may cause low temperature
burn symptoms, such as red spots and pigmentation.
Do not store your device near or in heaters, microwaves, hot cooking equipment,
or high pressure containers
Your device may overheat and cause a fire.
Do not drop or cause an impact to the charger or the device
. Store your device only on flat surfaces.
. If your device falls, it may be damaged.
Do not bite or suck the device
. Doing so may damage the device or cause an explosion.
. If children use the device, make sure that they use the device properly.
Keep your device dry
. Humidity and liquids may damage the parts or electronic circuits in your device.
. If your device is wet, dry the device with a towel and take it to a service centre.
Do not disassemble, modify, or repair your device
. Your device may malfunction and your risk of electric shock is increased.
. Any changes or modifications to your device can void your manufacture’s warranty.
If your device needs servicing, take your device to a service centre.
This manual’s images and content may differ from the product.
Overview
LED Light Indicator
USB‐A connector
Position guide
(Charging zone)
Check the product box for the following items: wireless Charging Pad and user
manual. The items supplied with the Wireless Charging Pad and any available
accessories may vary depending on the region
Using the Wireless Charging Pad
1. Connect the Wireless Charging Pad and AC Adapter with USB port, and
plug the Adapter into an electric socket.
Use only approved AC Adapter (over 2A). Unauthorized chargers may cause damage
or the Wireless Charging Pad may malfunction.
The charger is sold separately.
To save energy, unplug the charger when not in use the charger does not have a
power switch, so you must unplug the charger from the electric socket when
not in use to avoid wasting power. The device should remain close to the electric
socket while charging
The Wireless Charging Pad’s indicator light flashes differently depending on its
status. For more information about the indicator light, see below.
If the LED light indicator is not working properly, reconnect the charger to the
Wireless Charging Pad
LED
Light
Device Status
Indication
Green
Charging properly
Red
Not charging properly
Off
Idle mode
REMARK: Some USB Port from PC’s may also be used but it will not provide full
power needed by Wireless Charging Pad and may not work properly. If in doubt
always use with authorized AC Adapter with USB Out port rated at 2A
2. Placing the Phone with Wireless Charging Capability on the Wireless
Charging Pad.
Charging Area and
Transmitter Coil location of
Wireless Charging Pad
Approximate Phone Receiver Coil
Location
Location of Wireless Charging Pad Transmitter Coil and Typical Location of Phone
Receiver Coil (Shown for Lumia 920)
•
•
Our Wireless Charging Pad shows some markings indicating Coil Position.
The position guide indicates the upper side, lower side and the center of the
Wireless Charging Pad Transmitter Coil
•
Place the Phone with Wireless Charging Capability on top of Wireless
Charging Pad positioning and matching the locations of both Transmitter and
Receiver Coils.
•
Move up or down the Phone until Green LED lights is ON if first placement is
not successful. If not, the Smartphone may not charge properly, and its signal
may drop.
REMARK:
•
For some Lumia phones like 920 or 820, Charging Indicator may indicate as
charging is happening already even though Green LED is not ON yet and upon
removing from Wireless Charging Pad
•
This is not an issue or failure on the Wireless Charging Pad but a feature only
available for some Lumia Phones. Please wait until Charging indicator is Off
then place the Phone back to Wireless Charging Pad then move up or down
until Green LED is ON
•
Some of phones charging area not in the center of phone, end user should try
and get the experience for usage.
Lumia 920
Lumia 820
Charging Position of Different Phones with Wireless Charging Pad – Lumia 920 (above
LED) and Lumia 820 (center position)
Nexus 4
Samsung S4
Charging Position of Different Phones with Wireless Charging Pad – Nexus 4 and
Samsung S4 (both in center position)
3. When the Phone is fully charged, disconnect the charger from the
Wireless Charging Pad.
Check the Phones battery status looking at the charging icon displayed on the
screen.
Do not place any other object between the Phone and the Wireless Charging
Pad as the Phone may not charge properly or stop charging
Charging a Phone with the Wireless Charging Pad in an area with a weak signal
may cause a significant drop in reception.
The Wireless Charging Pad is compatible with WPC certified devices.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories ( e.g. charger, headset, USB cable)should not be disposed of
with other household waste.
To prevent possible harm to the environment or human health from uncontrolled
waster disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
This product is compliant with RoHS and REACH.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:07:02 14:00:09+08:00
Create Date                     : 2013:07:02 14:00:09+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Primax_Philips Charging Pad  User manual_V0.2_20130702
Creator                         : xiaoping.chu
Document ID                     : uuid:03a5e7f2-2cda-401d-ac33-517b802da53e
Instance ID                     : uuid:5462f2cd-9a2d-4d05-a846-0cc84da993dd
Page Count                      : 8
Author                          : xiaoping.chu

EXIF Metadata provided by EXIF.tools