Psion HFAM1G2 RFID MOUDLE HF-AM1-G2 User Manual

Psion Inc RFID MOUDLE HF-AM1-G2 RFID Module HF AM1 G2 UserMan

a href="https://usermanual.wiki/Psion" itemprop="url"> Psion >

USERS MANUAL

July 10, 2007 DPD A00285 A00 Sheet 1 of 5 WORKABOUT PRO G2 RFID MODULE HF/LF G2 EXPANSION MODULE INSTRUCTIONS Important: All Approval and safety information is outlined in the ‘Workabout pro G2 Handheld-computer User Manual’ – part number 8100140A. This manual is available on our website www.psionteklogix.com through the Teknet extranet Easily installable expansion modules for the WORKABOUT PRO G2 allow you to customise this hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID Module HF/LF G2. Before installing a module in the WORKABOUT PRO G2, all power sources must be turned off. • Remove the batteries. If your unit is using AC power, disconnect it. • Slide the switch to position OFF to shut off internal battery power. With the power shut down, you can install the RFID Module HF/LF G2. • Connect the USB connector on the RFID Module. • Slide the PCB guide in the Multi purpose End Cap. • Slide the RFID Module in the PCB guide. • Screw the stopper. RFID Module HF-AM1-G2 RFID Module HF-T2-G2 RFID Module LF-AH1-G2
Download:
Mirror Download [FCC.gov]
Document ID852630
Application IDb3Gz1Ns34tth5Y9qtAxS0w==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.75kB (284379 bits)
Date Submitted2007-10-08 00:00:00
Date Available2007-10-08 00:00:00
Creation Date2007-09-13 20:29:57
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2007-09-13 20:29:57
Document TitleMicrosoft Word - RFID Module HF-AM1-G2 UserMan.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: heyer
FCC ID Filing: GM3HFAM1G2

Navigation menu