Pycom WIPY2R WiPy User Manual Specfication Sheet WiPy2 0 v1 0
Pycom Ltd WiPy Specfication Sheet WiPy2 0 v1 0
Pycom >
Contents
- 1. User Manual
- 2. Users Manual
User Manual
★WiPy
The enterprise grade IOT development platform
that runs Python in real time with
the perfect blend of power, friendliness and flexibility. Create and connect your
things. Fast.
Distributed by Pycom Ltd.
Copyright © 2016 by Pyco m Lt d . All rights reserved. No part of this document may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical
methods, without the prior written permission of Pycom Ltd, except in the case of brief quotations embodied in critical
reviews and certain other noncommercial uses permitted by copyright law. .
WiPy Benefits
★MicroPython –the Linux of IoT for fast deployment ★1KM WiFi ★small and light
to fit in any cavity★Low power (in fact a fraction of power consumption of other IoT
platforms) means there’s no need for new nuclear power stations to run millions of
WiPys ★
All those hardware specs are nice, but the coolest part
is that they are super easy to use, because we have
written an powerful and intuitive Python API to take
advantage of every feature of the hardware.
Other WiFi boards are available and you might think,
“yet another platform…”, guess what? it’s not. Because
it runs Python and that works just like the Python you
are used to working with on a PC, the learning curve is
minimal, if there’s any at all. Simply put, the WiPy is all
about Python and the internet, but taken to the next
level.
USE YOUR FAVORITE EDITOR
Use your favorite code editor of choice to write your Python scripts.
QUICK VERIFICATION
For easy and fast debugging use the interactive shell that is accessible through
telnet or one of the serial ports.
EASY UPLOAD
Upload your scripts, and any other files you want to the WiPy via the FTP
server!
LOCALLY OR REMOTELY
Reset the WiPy (you can do it locally, or remotely via Telnet), and… you are
ready to rock and roll!
With dozens of ready to use templates and much more added options, now you can create
almost anything that comes to your mind. Combination of advanced content importers,
different layouts, header styles, post types,… gives you a freedom and control you have never
seen before.
Py
Py
Py
Py
Distributed by Pycom Ltd.
Copyright © 2016 by Pyco m Lt d . All rights reserved. No part of this document may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical
methods, without the prior written permission of Pycom Ltd, except in the case of brief quotations embodied in critical
reviews and certain other noncommercial uses permitted by copyright law.
Mechanical
★Size: 20mm x 42mm
Interfaces
★UART (x2), SPI, I2C, I2S, SD card
★Analog channels: 3×12 bit ADCs
★Timers: 4×16 bit with PWM and input
capture.
★3v3 output capable of sourcing up to
250mA
Processing
★Espressif ESP32 chipset
★Dual processor + WiFi radio System on
Chip.
•Network processor handles the WiFi
connectivity and the IPv6 stack.
•Main processor is entirely free to run
the user application.
•An extra ULP-coprocessor that can
monitor GPIOs,
the ADC channels and
control most of the internal
peripherals during deep-sleep mode
while only consuming 25uA.
Memory
★RAM: 512 KBytes
★Flash: 4 MBytes
★GPIO: Up to 24
Hash and encryption engines
★SHA
★MD5
★DES
★AES
WiFi Networking
★WiFi: 802.11b/g/n 16Mbps
Bluetooth
★Bluetooth Low Energy and Classic
RTC
Of course
DMA
All over the place
Security
★SSL/TLS support
★WPA Enterprise security.
★WiPy2.0 Specification
MicroPython code already written
-Built-in Python support for all the SoC features. (10K+ Lines of C code)
-Definition of a universal MicroPython Hardware API.
External libraries:
-Blynk: SMTP, MQTT, URLLIB, ONEWIRE, Accelerometer, Event loop MicroPython together with
the universal hardware API allow us to build a large set of powerful, robust, and portable
libraries across hardware platforms.
To Order goto www.pycom.io/webshop or contact Pycom on sales@pycom.io
Py
Py
Py
Py
EU Regulatory Conformance
Hereby, Pycom Ltd declares that this device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement
To comply with FCC RF exposure compliance requirements, the antennas used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed.
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host was
previously authorized as an unintentional radiator under the Declaration of Conformity procedure
without a transmitter certified module and a module is added, the host manufacturer is responsible
for ensuring that the after the module is installed and operational the host continues to be compliant
with the Part 15B unintentional radiator requirements. .
The module is limited to OEM installation ONLY.
The module is limited to installation in mobile or fixed application.
We hereby acknowledge our responsibility to provide guidance to the host manufacturer
in the event that they require assistance for ensuring compliance with the Part 15 Subpart B requirements.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID cannot be used on the final product. In these circumstances, the
OEM integrator will be responsible for reevaluating the end product(including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must be
labeled in a visible area with the following: “Contains FCC ID: 2AJMTWIPY2R”. The grantee's FCC
ID can be used only when all FCC compliance requirements are met.
The following FCC part 15.19 statement has to also be available on the label:
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module.
In the user manual of the end product, the end user has to be informed that the equipment
complies with FCC radio-frequency exposure guidelines set forth for an uncontrolled environment.
The end user has to also be informed that any changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate this equipment.
The end user manual shall include all required regulatory information/warning as show in this
manual.
The maximum operating ambient temperature of the equipment declared by the manufacturer is
-40~+85℃