Qiyue Optronics RNSMU4336A 43 inches SMART 4K UHD TV User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	4098891
Application ID	KYX7tx75Mgtc+bI01Avyjg==
Document Description	User Manual Part 1 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	390.61kB (4882686 bits)
Date Submitted	2018-12-07 00:00:00
Date Available	2018-12-07 00:00:00
Creation Date	2018-12-06 10:15:21
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-12-06 10:15:29
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	eng234

INSTRUCTION MANUAL
Before using the TV, please read this manual thoroughly,
and retain it for future reference.
Model: RNSMUA4336 LISTED
witis
"This productis manufactured and sold by Gurts International Ltd
RCA, the RGAlogo, the two dogs (Nippar and Chippor) logo. arerogistered radomarks ortrademarks of RCA
Trademark Management and are used undercense by Curtis ntornational Lis.
Any other product, service, company,trade or product name and logo referenced harein are nelther endorsed
nor sponsored by RCA Trademark Management or ts aftlates
English
CONTENTS
SAFETY 1
PRECAUTION
IMPORTANT
SAFETY 2
INSTRUCTIONS
ACCESSORIES 3
GETTING 3
STARTED
Remote Control 4
CONTROL Front View 5
REFERENCE Side View 5
Guie Back View 6
WALLMOUNT 7
INSTALLATION
Installation 8
Antenna Connection 9
AV Connection 9
YPbPr Connection 10
CONNECTIONS HDMI Connection 10
Power Cord Connection 11
Optical audio output Connection 12
Putting The Unit On A Proper Place 13
INITIAL SETUP Turning The Unit On For The First Time 13
Source Selection 13
Picture Menu 14
Sound Menu 15
Function Menu 16
TVSETUP Time Menu 17
Option Menu 18
Lock Menu 20
Channel Menu 21
10
11
12
13
14
CONTENTS
USB MEDTA
PLAYER
SMART TV
OPERATION
DISPLAY
MODE Video Formats
SPECIFICATION
TROUBLE—
SHOOTING TV Symptom
GUIDE
22
24
26
27
28
SAFETY PRECAUTION
* caution MaRkine was LocaTep at THE REAR PLAcEMENT INFoRMATION
or ThE appaRATUS
CAUTION
LECoceicre ons
D0 NOT OPEN
Do Not EXPOSE THIS UNIT To RAIN OR MOISTURE
|AVIS RISuE DE cHO¢ ELECTRIOUE— NE PAS OUVAIR
WaARNING: To REDUCE THE RISk OF ELECTRIC
SHOcK, D0 NOT REMOVE COVER (OR BACIO
No UseR sERVICEABLE PaRTs INSiDE.
REFER SERVICING To QUALIFIED SERVICE
PERSONNEL
The lightning flash with arrowhead symbol,
A within an equilateral tiangle is intended to
alert the user to the presence of uninsulated
"dangerous voltagewithin the product‘s enclosure
that. may beof suffcient magnitude to constitute a
risk of electric shock to persons.
fl The exclamation point within an equilateral
Triangle is intended to alert the user to
The presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance
ACAUTIDN
+ pANGER or ExPLosioN if satTeRy is
iNcoRRECTLY REPLACED. REPLACE ONLY
wirh The same o EouivateNt tyE
+ use or conTRo.s or ApsustMents or
reRFormMaNce or procepures oTHer
THAN THose sPECIFIED MAY RESULT IN
Hazarbous Rapiation ExPosure
A warnine
«To REDUCE THE RiSk of FIRE OR ELECTRIC
sHock, bo Not ExPosE This APPLIANCE To
RaiN or moisture
To ReveNT Fire or sHock HAzARD, bo NoT
+EXPose This uNT To RAIN or moistuRE. Do
Nor Puace osyEcTs FILLED witH Liauins oN
on NeaRr THis unit
+ SHoULp ANY TRoUBLE occuR, isconNECT
THE Ac roweR corp AND ReFER seRVICING
To A auALIFIED TECHNICIAN
This equipmentis a Class 1 or double insulated
electical applance t has been designed in such a
way that it does no requre a atety connection to
lectica cath
Do not use this unitin places that are extremely
hot, cold, dusty or humid
*Do not restrietthe airflow of this unit by placing it
somewhere with poor airlow, by covering it with
a cloth, by placing it on bedding or carpeting
sAFETYINFORMATION
* When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself, Pulling
the cord may damage it and create a hazard
* When you are not going to use the unitfor a long
peried of time, disconnect the AC power cord
RariNe PLATE LocAtioN
The rating plate is located on the rear of the unit
rce smrements
NOTE: This unithas been tested and found to comply
with the limits for a Class 8 digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation
This unit generates, uses and can radate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there
is no guarantee that interference willnot occur in a
particularinstallation. f this unit does cause harmful
interference to radio or television reception, which
can be determined by turning the unit off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures
— Reorient o relocate the receiving antenna
— Increase the separation between the unit and
receiver
—Connect the unitinto an outlet on a circult different
from that to which the receiver is connected
— Consull the dealer or an experienced radio/TV
technician for help
A warnine:
Changes or modifications to this
unit not expressly approved by the party responsible
for compliance could void the user authority
to operate the unit.
HaomLl
"HDML, the HDMI togo and High—Detinition Multimedia
Interface are trademarks or registered trademarks of
HDM! Licensing LLC."
IMPORTANT SAFETY INSTRUCTIONS
1)Read these instructions
2)Keep these instructions
3)Heed all warnings
4)Follow allinstructions
5]0o not use this apparatus near water.
8)Clean only with a dry cloth
7)00 not block any ventifation openings
Installin accordance with the
manufacturer‘s instructions
€)00 not installnear any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including ampliiers) that
produce hoat.
3)Do not defeatthe safety purpose of the
polarized or grounding—type plug
A polarized plug has two blades with one
wider than the other
A groundingtype plug has two blades
and a third grounding prong
The wide blade or the third prong is
provided for your safety.
If the provided plug does not it into your
wall outle, consult an electrician for
replacement ofthe obsolete outle.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus
11)0nly use altachments / accessories specified
by the manufacturer
12)Use only with the cart, stand
tripod, bracket, o table
specifed by the manufacturer,
or sold with the apparatus
When a cart is used., use caution when
moving the cart / apparatus combination to
avoid injury from tip—over
13)Unplug this apparatus during lightning
Storms or when unused for long periods of
time
14)Refer all servicing to qualifed service
personnel. Servicing is required when the
apparatushas been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped
15) The mains plug is used as cisconnect device,
the disconnect device shallremain readiy operable.
PERSONAL SAFETY NOTICE
@ ALWAYS read and follow allinstructions for the installation and use of the TV.
@ Place the TV in a location that is level and sturdy.
®@ DO NOT place the TV on a furniture with drawers that can be used as steps by small
children
@ DO NOT allow children to pull the TV or climb on the furniture where the TV is placed
© DO NOT allow children to play in front of or around the TV
@ ALWAYS route all the cables connecting to the TV so the cables cannot be easily pulled and
grabbed by children.
@ When installing the TV on a wall, please purchase a TV mount recommended by a
professional TV installer, and follow the installation instructions that come with the TV mount
@ Before installing the TV on a wall, please check to make sure the wall structure can support
the weight of the TV and the mount, If in doubt, please ask the advice from a professional TV
installer
ACCESSORIES
Please check and identify the supplied accessories
Remote control
Battery(AAA)
Warranty Card
Instruction Manual
Base stand
Base stand scrows
GETTING STARTED
usine ThE remore conTrot.
Point the remote control at the remote sensor located on the unit
When there is a strong ambient ight source, the performance of the infrared remote sensor
may be degraded, causing unreliable operation:
The recommended effective distance for remote operation is about 16 feet (5 moters)
To NstaLL the sarreries
1.Open the battery door 2. Insert 2AAA‘batters
sartery RepLAcEMENT
When the batteries become weak, the operating distance of the remote control is greatly
reduced and you will need to replace the batteries
AGAUTION : Danger of explosion it battery is incorrectly replaced
wores
Ifthe remote control is not going to be used for along time, remove the batteries to avoid
damage caused by battery leakage corrosion
Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON—ZINC) or
rechargeable (NICKEL—CADMIUNM) batteries
Always remove batteries as soon as they become weak
Weak batteries can leak and severely damage the remote control
warnine
A Do not dispose balteries in a fire. Batteries may explade or leak
Batteries shallnot be expased to excessive heat such as sunshine, ire o the like
x1
x2
x1
x1
xa
CONTROL REFERENCE GUIDE
REMOTE CONTROL
@ m on t
@ ® ®
POWER(): Tums the TV on or off
MUTE(IR): Mute or estore the sound
Number buttons: Choose the channel irectly
Decimal Point Input the decimal point
Retur(Back): Returnto he previously—viewed channel
MENU: Access the main monu
SOURCE: Select the input source made
Navigation buttons: (UpDown/Left/Right
Navigate the menu.
OK: Confm the selection
HOME(ZS ): Enterthe home page
EXT Exi the current scroon
NETFLI Access the Noix intorface
VOL+NOL— : Increases or decreases the TV volume.
CHA/CHY : Change to the previous or next program:
Talw)
IMPORTANT NOTICE
Format : NEC
Universal Remote Code: 20DF
Code location Chart
INFO: Show the dotaild information
EPG: This contrl button dons not apply to this product
REC(e): This contol button does not apply to this product.
MTS: Salect desired sound output depending on the
broadcasting channel
GC: Setup the mode of losed caption
SUBTITLE:Access the sublite.
CH LIST:Access the channel it
FAV: View your assigne favorte channels
QUICK Access the quick menu
Color Buttons(RED/GREENNYELLOW/BLUE): Execute the
promptfunction in specifc mode
PLAYIPAUSE (»/t}; Pause or contiue the playback.
STOP ( ): Stop playback
FAST BACKWARDIEAST FORWARD (tai>m); Fast review of
fast forvard
Depending on the country where the TV is installed, certain apps may not be available.
The quick launch button on the remote control associated with those apps will therefore not work
All other functionalities of the remote will work as designed
CONTROL REFERENCE GUIDE
FRONT VIEW
About remote cantrol working gistance and angle, see next page
PowerStandby Indicator: Blue and red dual—color LED. it shows red when the TV is turned off and blue when
turned on. Remote Control Sensor: Remote contral IR sensor which recsives infared ray sant by remote control
Remote Control Sensor
Power/ Standby Indicator
SIDE VIEW
GHa: Scans up trough the channa Ist in the TV monu system, i acts ike the up erow on the remote contol and
can be used to select menu options
CHr: Seans doun trough the channa st In the TV meny system. it acts ike the dawn arow on the remote contral
and can be used to select menu options
VOL#: Increasos the volume. n the TV monu system, it acts ie the ight arow on the remolo contol and can be used
to solest manu optons
VOL—Decreases the valume. in the TV menu systam, it asts ike t lt arow on the remote control and can be used
to selest manu optons
O/INPUT: When TV powar of, ong press ths burton to urn on When TVis on long press his button to un lf
short mss ths bufton t cal out ho input source monu, pross he VOL+/— burton t sclectthe input
source and pressthe power on/ot button againto confim t selecton
CONTROL REFERENCE GUIDE
BACK VIEW
f <—————— ——
OPTICAL: Digital TV sound output
USB: Connect the USB device such as the flash disk to access the TV media function.
HOMI: (High—Definition Multimedia Interface) Provides an uncompressed digital connection.
VGA: Connect the PC to these jacks
MINI YPbPr: Connect the YPbPr output Jack of the DVD or VCR
RF: Connect t receive the signal from your antenna or cable through a coaxial cable.
MINIAV: Connect an AV device that has compostise video jacks, such as a VCR or DVD Player
Note: PCAUDIO IN and mini AV share one port, PC audio and YPbPr audio should connect from this port
EARPHONE: Connect a 3.Smm headset for personal audio
LAN: Connectthe Intenet
WALL MOUNT INSTALLATION
iNsTALLING / ReMOVING THe sase sTaND
WARNING : The LED Display is very fragile and must be protected atallimes when removing the base
Stand
Be sure that no hard or sharp object or anything that could scratch or damage the LED display. comes into
contact with it Do NOT exert prssure on the front ofthe unit at any time because the screen could crack.
1. Disconnectall cables or cords connected to the unit
2. Lay the unit down on a flat surface with the back side facing up Please make sure to place a soft
cushioned material (such as a pilow or thick piece of foam ) beneath the screen
3. To remove the base stand, loosen scrows offthe holes then pull downwards to release
the base stand
PocessiSooen
Oy
Morinn | ts
MountTIN on ThE waLt
This unitis VESA—compliant, and is designed to be wal—mounted with a VESA—compliant 8‘x 8°
(200mm x 200mm) mounting kitdesigned fo lat—panel TVs (not supplied)
Length of screw should benot exceed 8 mm
note
Remove the base stand before mounting the unit on the wail
8" s
3"
Four mounting holes
(size me scrow)
Installation
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to a
wall, see page 7 for mounting advice; the wall mount itself is not supplied.
IMPORTANT!
* Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
* The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Attaching the stand
Step 1
Place a soft cushioned material
on top of a flat surface to prevent
damaging the screen panel. Then
place the TV monitor flat on top,
with the screen side facing down,
as illustrated on the right (1). ®
Step 2
Align the screw holes on the
stand and the bottom of the TV,
as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with
a screwdriver to affix the stand
to the panel, as illustrated on the h e e e e e
right (3).
NOTE: Do not apply excessive
force as this may damage the
screw holes.
longside
CONNECTIONS
coNNECTING A TV ANTENNA / CaBLE / sATELLITE
To view television channels correctly, a signal must
be received from one ofthe following sources:
—An indoor or outdoor acrial antenna
—A cable system
—A satellite system
wote
Forreceiving over—the—air TV broadcasts, we
recommend that you use an external fixed antenna. —
Should you require the use of a temporary antenna, 1
please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas
Only when you are in close proximity to a transmitter ©<—{\@mm|—
will a temporary antenna reproduce a signal as
strongly as afixed antenna
&.
Satellte, cable or TV antenna
cable to TV ANTENNA
terminal (cable notincluded)
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc
connEctine bevices witk Acomposite
vibeo ouTPut
To connect AV devices such as a VCR, video game system or camcorder.
Connecting to a VCR/ Video Game System / Camcorder
Connect the AUDIO /VIDEO cable (not included) as shown
Make sure you connect the cable from the other equipment ( AUDIO and VIDEO OUT ) to this unit
(MiniAV)
note
1. Please refer to the user manual
for the other equipment for
more information
2. Composite video input
(shared with component)
Teavpiorvineo
OUTjacks
ol
culcotaciive Teaupiorvibeo
Njacks
CcONNECTIONS
connEctive ahik—DEFINTioN (#0) source usine. compoNeNT conNEction
High—Detinition (H°) Devices with component video output mustbe connected to the YPbPr inout
Connectthe componentvideo cable and audio cable (notincluded) as shown
Make sure you connectthe component video cable and audio cable from the other equipment
(COMPONENT OUT and AUDIO OUT) to the unit COMPONENT N
note
When connecting a DVD player to the television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached
DVD player resolutions vary from 480to 1080R
and thistelevision can support DVD players up to
a maximum resolution of 1080R
* May require a subscription
forreceiving HD channels,
check with your cable/satellite
service provider for details.
ToconRoNeNT
AUDIO INJacks
TocompoNeNt Ho source
viDEO OUT jacks with component video output
(Digital Gable Box®,
To couronent aupo Satellite Receiver® or Tocowponent
OUT jacks . \_ external over—the—air HD—Tuner) VIDEO INjacks
conlnectine a Hick—peFINITION (#o) source usine HoM CoNNECTION
HDM (High Definition Multimedia Interace, supports both video and audio on a singledigital connection
for use with DVD players, DTV, set—top boxes and other digital AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as wellas Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content ransmitted and received by
DVi—compliant or HDMIcompliant displays
HDMI has the capabilty to supportstandard. enhanced or high—defintion video plus standard to
mult—channel surround—sound audio. HDM features include uncompressed digitalvideo, a bandwidth of
up t 2.2 gigabytes per second (wth HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs
Connect the HDMI cable (not included) as
shown
Make sure you connectthe cable from the
source equipment ( HDMI OUT ) to this unit
(Homtin )
mas
& Hom caste
4 (wotiNctuben) wo source
With component video output
jmap igltat Gabie Box‘,
Receiver® or
To Homt To Hom external over—the—air HD—Tuner)
OUT jack
10
CONNECTIONS
conNectine ThE Power corp
You can power on your TV unitbefore you make sure the power cord is nserted wl
Atthe same tme, please check thatthe rated voltage of your unit matches your local
Voltage
wore
+ Insertthe power lugfull intothe sacket ult
(Ifthe powerplugisloose itcould generate heat and
cousetire )
* Ensure that the power plug is easily accessible:
* Ensure the earth pin on the power plug is securely
connectedto preventelectreal shock
* Do nottouch the power plug with a wet hand
(This may cause electral shock)
* Do not use any power cord otherthan that provided
with this TV. (This may cause fire or electrcal shock.)
* Do not damage the power cord
(A damaged cord may cause ire or electrical shock.)
* Do not move the TV withthe cord plugged in the
socketoutlot.
* Do not place a heavy object on the cord or lace
the cord near a high—temperature object
* Do not twist the card, band it excossively, o strotch it
To AC wall cutet
* Do notpullon the cord. Hold onto the power plug body when disconnecting cord
* Do not use a damaged power plug or socket outlot
11
CONNECTIONS
Connection to a Home Theater Audio System
For BEST audio performance
Connecting to a Home Theater System How To Setup Digital Audio Output
t h Press the MENU button on the remote control
Dolby Digital can deliver optimal 2 channel
stereo or surround sound with five discrete ... E7°S$ the ght » arrow button to select sound
Press the down Y arrow button to highlight
full hi is pl th ch If s s
M io oo eiamnets plus a sixth channel fOr . pigrial Audio Output » Audio, PCM
Enjoy optimal sound reproduction from your
system with a Dolby Digital amplifier that
incorporates a digital optical input. Connect hss Eo
an optional digital cable directly to the
television‘s optical audio output to
listen through all inputs except VCA Functon
(The VGA does not support digital audio) ,
2o
Loo
es
Lo
Optional digital cable
e (not included)
romtn rooron
Staer
doy S.roe
Corocin fsritce
" "NOTE: Refertothe User Manval from your home theater
Sumrectr equipmentfor recommended audio setings.
12
INITIAL SETUP
PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface
To avoid danger, do not expose the TV
to water, or a heat source
(e.9.lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV antenna or cable, turn the television ON.
A screen will display asking you to select a Language, Country and Internet.
Ceered
es
Es
Select option of Auto Tuning under the up and down keys .Then press OK button
on suitable location and the auto tuning will begin
@ Auto Search ESaco
otes
SOURCE SELECTION
1. Press the SOURCE button on the remote control.
2. Use the Aaeru((on to select the options (TV,AV.ComponentHDML,USB)
and select any of them using the OK button. (The sereen will change to your desired source).
Input Source
EJ TV PV Component [elsl i +) Ne 2
ENS
Note
Before watching please make sure all necessary cables and devices are connected.
13
TV SETUP
Picture Menu
Press MENU button to display the main menu
Press 4 / > button to select PIGTURE in the main menu,it will highlight the first option
oo Picture Mo
uie elcsa
Function Brightness
irifs Color
m Bhcificsy
Tint
Lock
Backlig
Channel
Color Temperature
Picture Mode: Choose among Sports, Normal, Mild, Save and User. The following
five items (Contrast, Brightness,Color, Sharpness and Tint) can be adjust only when
the picture mode is set to "User" mode.
Contrast: Adjust the difference between light and dark areas of the picture
Brightness: Adjust the lightness of the picture
CGolor: Adjust the richness of the picture.
Sharpness: Adjust the ege of the picture
Tint: (Only for some sources) Adjust the tint value of the color.
Backlight: Adjust the backlight value of the TV screen
Color Temperature: Select the overall color tone of the picture. Choices are Cool,
Standard and Warm
TV SETUP
Sound Menu
Press MENU button to display the main menu
Press < / > button to select SOUND in the main menu, it will highlight the first option.
Picture botienbed
Eoo Balance
Function AVL
Bre tssnc
uo
MEse cssc
e h h
Digital Audio output
l EToE uons ns
Channel bu
Sound Mode: Choose among Standard, Music, Movie, Sports and User. The value of
120Hz, 500Hz, 1.5KHz, 5KHz or 10KHz can be adjusted only when the sound mode
is set to "User"mode.
Batance: Control the sound balance between the right and left speaker
AVL: Turn on to adjust the sound volume depending on the input signal.
Surround Sound: Help to create rich and wider sound from stereo sound sources
Video Description: Turn on or turn off the video description function to help the blind
or visually impaired viewers
Digital Audio Output: Set the digital audio output mode to PCM or Auto.
Audio Languages: Set the primary or secondary digital audio language
corresponding to the signal.
TV SETUP
Function Menu
Press MENU button to display the main menu
Press 4 / > button to select FUNCTION in the main menu, it will highlight the first option.
Picture Noise Reduction
Eon MPEG Noise Reduction
Aspect Ratio
Function
uesc
s ME
e Netflix Deactivate
Netflix ESN
Lock
Netflix Version
Channel SilEael
Noise Reduction: Eliminate noise in the picture. Choices are Off, Low, Middle, High
and Auto
MPEG Noise Reduction: Eliminate noise generated while converting or compressing
MPEG signals. Choices are Off, Low, Middle and High. Aspect Ratio: Select the
aspect ratio (display proportions) according to your video signal type or preference
Choices are 4:3, 16:9, Movie, Native and Panorama
Note: The choices of aspect ratio differ by different regions or sources.
Link Setup: Command and control HDMI devices connected to the TV set.
1. Enable Link: Turn on or turn off HDMI Link function.
2. Auto Power On: Turn on to power on the TV set automatically when you turn on the
HDMI device.
3. Auto Standby: Turn on to change the HDM! device to standby mode automatically
when you turn off the TV set
4. Device Select: Select the HDMI device from the device list
HDMI EDID: Switch the version of Extended Display Identification Data.
Netflix Deactive: Logout your your Netflix user account.
Netflix ESN: Check the Netfix ESN number.
Netflix Version: Check the Nethix SW version
E—Manual: Electronic Uesr Manual
TTS: Setup the function of Text—to—Sound.
1. TTS: Turn on or turn off the TTS function. The following four items can be adjusted
only when TTS is turned on.
2. Verbosity: Select the verbosity level.
3. Rate Support: Select the sound speed

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : eng234
Create Date                     : 2018:12:06 10:15:21+08:00
Modify Date                     : 2018:12:06 10:15:29+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:12:06 10:15:29+08:00
Creator Tool                    : CorelDRAW X6
Format                          : application/pdf
Title                           : 未命名 -1
Creator                         : eng234
Document ID                     : uuid:5d7814dc-ea1f-4dea-b2c7-c7a7a314921e
Instance ID                     : uuid:5c13d2d4-e8f9-464a-895b-814489c6fbe4
Producer                        : Acrobat Distiller 11.0 (Windows)
Page Count                      : 20

EXIF Metadata provided by EXIF.tools