Quanta Computer NH2 Smart Stick User Manual

Quanta Computer Inc Smart Stick

Contents

User Manual

Quad Core 10
Specifications
Micro USB ( Power input )
Micro SD
HDMI
Power Button
USB 2.0
Technical Support Line
LED ( Power )
Quanta Compute Stick
Product Manual
Product Interface
Service Warranty
Package Contents
Adapter USB cable HDMI cable
Power cable
USB
USB
Micro USB
wireless keyboard/mouse
(Self-contained)
(Genuine Accessories)
HDMI cable
Support Bluetooth keyboards/mouse
(Genuine Accessories)
Product Manual
Product Manual
1. Connect the HDMI to the corresponding port on the television (use in conjunction with the HDMI
extension cord if the distance between the product and the television exceeds the length of the
HDMI cable) and select the appropriate [Video Input Source]
(i.e., the HDMI input channel) on the display (e.g., TV, monitor, projector).
2. USB Power Supply: Connect the Micro USB on one end of the power cable to the product and
USB to the corresponding voltage transformer.
3. The product supports Bluetooth or USB wireless keyboards and mouse.
4. Press “Power” to activate the system.
Remark:
1.Without permission granted by the NCC, any
company, enterprise, or user is not allowed to
change frequency, enhance transmitting power,
or alter original characteristic as well as
performance to an approved low power
radio-frequency devices.
2.The low power radio-frequency devices shall not
influence aircraft security and interfere legal
communications; If found, the user shall cease
operating immediately until no interference is
achieved. The said legal communications means
radio communications is operated in compliance
with the Telecommunications Act. The low power
radio-frequency devices must be susceptible with
the interference from legal communications or
ISM radio wave radiated devices.
3.The CMOS on the motherboard draws power
from a micro battery placed in the product.
Please do not attempt to replace this battery.
Replacing the battery with an incompliant battery
may lead to hazards. Please dispose the old
battery appropriately.
Thank you for your purchase. A service fee may be
charged in the following situations:
Improper handling of the product without
referencing the product manual.
Damages due to human error, computer viruses,
humidity, improper software installation,
or self-disassembly/assembly.
Damages due to unforeseen disasters and
circumstances, such as fires, floods, typhoons,
and earthquakes, etc.
Damage to accessories, consumables, and
natural wear-and-tear.
Specific requests to reinstall software or adjust
computer settings, where a service fee shall
incur.
Damaged or dirty warranty labels that are
unrecognizable.
Please back up all personal information and files
prior to serving your product as the maintenance
process may influence the integrity of your
information.
Intel Atom Z8300CPU
OS
Memory
Storage
Expansion
Display
Wireless
Port
Input
Power
WiFi 802.11 B/G/N ；BT 4.0
USB 2.0 x 1
Micro USB
HDMI
Micro SD ， Max 64GB
32GB eMMC
2GB DDR3
Windows 10
5V/2A
Compute Stick
Fed er al Co mmunication Commission
Interference Statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
Any changes or modications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are
restricted to indoor usage only.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance 20cm between the
radiator & your body.
FOR COUNTRY CODE SELECTION USAGE (WLAN
DEVICES)
Note: The country code selection is for non-US
model only and is not available to all US model. Per FCC
to US operation channels only.
Industry Canada statement
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject
to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
1) l’appareil ne doit pas produire de brouillage, et
2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
This device complies with RSS-310 of Industry
Canada. Operation is subject to the condition that this
device does not cause harmful interference.
Cet appareil est conforme à la norme RSS-
310 d’Industrie Canada. L’opération est soumise à
la condition que cet appareil ne provoque aucune
interférence nuisible.
This device and its antenna(s) must not be
co-located or operating in conjunction with any other
antenna or transmitter, except tested built-in radios.
Cet appareil et son antenne ne doivent pas être
situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées.
The County Code Selection feature is disabled
for products marketed in the US/ Canada.
La fonction de sélection de l’indicatif du pays
est désactivée pour les produits commercialisés aux
États-Unis et au Canada.
FOR MOBILE DEVICE (>20cm from body / low
power)
Radiation Exposure Statement:
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance 20cm between the
radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition
aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé
avec un minimum de 20 cm de distance entre la source
de rayonnement et votre corps.

Navigation menu