RF Digital 24 2.4 GHz Transceiver Module User Manual

RF Digital Corporation 2.4 GHz Transceiver Module Users Manual

a href="https://usermanual.wiki/RF-Digital" itemprop="url"> RF Digital >

Users Manual

    13715 Alton Pkwy • Irvine • CA • 92618 Tel: 949.610.0008 • Fax: 949.610.0009 www.rfdigital.com • sales@rfdigital.com   1© Copyright, RF Digital Corp.   8/13/2009 11:12 PM  Patents Pending RFDP8 RF Module RFD21733 RFD21735 RFD21737 RFD21738 RFD21739  Complete 2.4 GHz RF Transceiver Module with Built-In RFDP8 Application Protocol Part Numbers RFD21733, RFD21735, RFD21737, RFD21738, RFD21739                                                RFD21735Optional Configuration For use with External Antenna RFD21733  15mm x 15mm (0.600 inch x 0.600 inch) RFD21733 / RFD21735 is a complete, READY-TO-USE wireless solution with it's built-in user application interface (RFDP8).  Includes RFID, ESN, Logic Switch Transmitter / Receiver, 9600,N,8,1 Serial UART and many easy-to-use addressable network modes.  No development required at all, no RF layout, no code writing, all features are built-in.  Be up and running with a full wireless solution in minutes.   Applications• Active RFID• Long Range RFID • Remote Control • Light Controls • Home Automation • Alarm Security • Keyless Entry • Perimeter Monitoring • PC Keyboard Security• Wireless Keyboard • Wireless Mouse • TV Remote • Home Stereo Remote • Asset Tracking • Wireless PTT • Remote Switches • Remote Terminals • Wireless RS232 DB9 • Wireless RS485 • Temperature Control • HV/AC • Meter Reading • Data Acquisition   • Inventory Control • Keyfob Remotes • Industrial Controls • Vending Machines
    13715 Alton Pkwy • Irvine • CA • 92618 Tel: 949.610.0008 • Fax: 949.610.0009 www.rfdigital.com • sales@rfdigital.com   2© Copyright, RF Digital Corp.   8/13/2009 11:12 PM  Patents Pending RFDP8 RF Module RFD21733 RFD21735 RFD21737 RFD21738 RFD21739                                                       • WiFi interference tolerant. • Bluetooth interference tolerant. • Zigbee interference tolerant. • Very low cost. • No external parts required. • No RF layout required. • Easy and ready-to-use, hand-held, eval and application boards available. • Ultra small 15mm x 15mm footprint. • Fully contained, truly a finished, ready to use module. • FCC, CE, IC (ETSI) Compliance approvals (pending). • Typical range outdoor; 300 feet (100 meters), indoor 100 feet (33 meters). • Worldwide 2.4GHz ISM band operation. • User configurable without need for any programming. • 2uA Ultra low power modes. • Only 14mA current consumption at 0dbm RF power output. • Only 17mA current consumption at -94 dBm receive sensitivity. • 16 bit CRC data accuracy verification built-in. • 32 bit unique factory ESN in every module (4 billion combination security). • Flexible network modes, including broadcast and individual addressing. • Optional version available for use with external antenna (RFD21735). • Switch on/off, logic, remote-control without the need for an external controller. • Switch nodes individually addressable without the need for an external controller. • Wide supply range +1.9V to +3.6V. • Built-in, high performance internal antenna (RFD21733). • Peer to Peer (Ad-Hoc) networks and configurations. • Point to Multi-Point networks and configurations. • Multi-Point to Multi-Point networks and configurations. • Selective addressing of any module by using factory built-in ESN. • Fast-turn-around, minimal latency (20 millisecond). • Patent pending RFDP8 interference tolerant protocol. • Full application protocol runs transparent to the user. • Easy to use, simple to design in. • Stores up to 60 ESNs (Electronic Serial Numbers) for network modes. • Many to one data modes ideal for multi-point data acquisition. • Unlimited number of module nodes can communicate to each other.  RFD21733 / RFD21735 Features RF Digital's RFDP8 application firmware loaded into the RFD21733 /  RFD21735 modules can be customized to fit application specific user requirements.  RF Digital can design and manufacture fully custom modules to fit specific customer requirements.  If you do not find what you're looking for, feel free to contact RF Digital with your requirements. Custom ModulesRFDP8 Application Protocol • Mode Selector Chart See below forREADY-TO-USE Eval boards.  Eval Kits
Download:
Mirror Download [FCC.gov]
Document ID1169086
Application IDgL5xANkHtyE7qGGNh6hcJg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize147.3kB (1841247 bits)
Date Submitted2009-09-14 00:00:00
Date Available2009-09-14 00:00:00
Creation Date2009-08-13 23:12:30
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2009-08-14 08:12:47
Document TitleMicrosoft Word - RFDP8.RF.Modules.Manual.08.11.09.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Personal Computer 1
FCC ID Filing: UYI24

Navigation menu