ROULE ELECTRONICS RL9816C1 Car Warning Indicator User Manual 1
GUANGDONG ROULE ELECTRONICS CO., LTD Car Warning Indicator 1
Contents
- 1. 15_RL-9816C1 UserMan
- 2. Users Manual
15_RL-9816C1 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4041133 |
| Application ID | psulxL1m2JhJ+9OcPKKIAw== |
| Document Description | 15_RL-9816C1 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 116.53kB (1456564 bits) |
| Date Submitted | 2018-10-19 00:00:00 |
| Date Available | 2018-10-19 00:00:00 |
| Creation Date | 2018-09-14 14:15:42 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2018-09-14 14:15:42 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | æž—å½©åŽ |
Version 1. 2 C€ Rb Car Warning Indicator MODEL: RL—9816C1 USER MANUAL Function Description This product adopts RF transmitter/receiver modules and learning code for easy and convenient operation. The Outdoor Unit is a PIR transmitter. When the Outdoor Unit detects thermal infrared signals (e.q. moving person), it will send a RF signal to the Indoor Unit. The indoor unit will then emit a "Ding—Dong" sound and the LEDs will flash twice to remind you. Operating Instructions (1) Slide switch operating desprition Hi: Turn the warning indicating voume to High level. Low: Turn the warning indicating volume to Low level. Silent: Mute with light flashing. (2) Learning Code Slide the receiver switch to Hi or Low and then insert batteries, it will emit a "DingDong* sound. Later, press the "Code" button at the back of the receiver Then powerup the PIR transmitter to trigger the working indicator light, which means a RFsignal has been sent. If the receiver receives the signal, it will emit a "Ding—Dong"sound and the indicator light will flash to indicate that the code is learned successfully. (3) Clearing Code Press the Code button and at the same time power on the unit, it will give a "Ding —Dong" tone. Press and hold the Code button for more than 6 seconds, the receiver will give tones of "Di—Di—Di, Ding—Dong*, which means the code has been cleared successfully. (4) "Silent" level description: When the receiver receives the RF signal, no indicating sound will be given but the light will flash for 10 seconds. (5) Low Voltage Indicating description: Receiver: When the voltage is lower than 3.3V, the LED light will be on constantly. Transmitter: When the voltage is lower than 3.3V, the LED light will be on constantly. (6) Recommended installation height: 1m+0.2m Warm Tips 1. When the PIR transmitter is powered on for the first time, it needs 40 seconds to be ready to work normally. The time interval for each PIR trigger is 12 seconds If human is detected within the time interval, the countdown of time interval will be re—started. 2. The PIR detection range may vary in different working environments, especially in the area where the temperature is uneven Specifications Receiver (Indoor Unit) PIR Transmitter (Outdoor Unit) Battery DC4. SV(AA*3) Battery DC4. SV(AA*3) workng Tandby Current $1790m8 Gurrent CBSuA orkin Standby . | M2x 1mA Current <15mA Current —| Average |0.3 mA dlarm _ | Lo Level |83—884B PIR Detection Distance | S6m PIR Detection Angle . | ©90° Volume (0.3m)_| HiLevel |88—934B Transmitting Time Intervall 12828 RF 433. 92250(z | RF 433. 92250z Working Distance ~ | Lz Working Distance ~| z20q (Open Area) ~80m (Open Area) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna — Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected —Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2018:09:14 14:15:42+08:00 Modify Date : 2018:09:14 14:15:42+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : 林彩华 Creator : CorelDRAW X6 Title : 未命名 -1EXIF Metadata provided by EXIF.tools