Radio Engineering HD5-600 Digital Video Recorder User Manual

Radio Engineering Industries Inc. Digital Video Recorder

Contents

Users Manual

1-10 User Manual For Digital Video Recorder HD5-600
2-10Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without any notice. The purpose of this manual is to kindly aid the user for the operation for our MDVR. The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings. Guarantee & Warnings 1) Electrical Apparatus Safety All installation and operation should comply with local electrical safety norms. 2) Transportation In the process of transportation, storage and installation, please avoid heavy stress, violent vibration, impact and water splashing. 3) Installation Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the equipment before the MDVR installation is finished. 4) Requirements on Engineers & Technicians All the work of checking and maintenance should be done by qualified technicians and engineers. We do not undertake any responsibility caused by unauthorized modifications. 5) Requirements on Environment The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate ventilation for cooling. 6) Accessories Make sure to use accessories from the manufacturer recommended in the attachment. Insulate circuit ground and metal shell for all the peripherals. Before installation, please open the package and ensure that all parts are included. If there are any problems, please contact us as soon as possible.
756 3-101. PRODUCT CHARACTERISTICS 1.1. OVERVIEW HD5-600 is a functional Digital Video Recorder specially designed for vehicle video surveillance and remote monitoring. It has a high-speed processor and embedded operating system, combining with the most advanced H.264 video compression / decompression technology, 3G/4G network, GPS positioning technology, as well as WIFI. It supports not only video recording in 1080P, 720P, AHD, D1, HD1 and CIF formats, but also vehicle travel information recording and wireless data upload. With center software it also achieves alarm linkage central monitoring, remote management and playback analysis. It is easy to use with simple design, multi-functions, HDD + SD card , superior anti-vibration, flexible installation and high reliability. 1.2. SPECIFICATIONS Function Overview Preview, Recording, Playback, Network, Locating System OS Linux 3.0.8 Control Mode Easy Check, Network (3G/4G/WIFI), Mouse Video Input 4 channels AHD+2 channel IPC Output 1 channel (RCA) Total Resource PAL: (4x25)FPS 720P(AHD)+2*1080P@30FPS(IPC) or (4x12)FPS 1080P(AHD)+2*1080P@30FPS(IPC) NTSC: (4x30)FPS 720P(AHD)+2*1080P@30FPS(IPC) or (4x15)FPS 1080P(AHD)+2*1080P@30FPS(IPC) Video Signal Standard Electrical level: 1Vpp Impedance : 75Ω NTSC/PAL OptionalAudio Input 6 channels (2 channel IPC audio input) Output 1 channel (RCA) Audio Signal Standard Electrical level: 2Vpp Input impedance: 4.7kΩ Display Display Split 1/4/9 OSD GPS information, alarm, license plate, speed, date/time Operation Interface Semi-transparent GUI Recording Video/Audio Compression Video: H.264 Audio: ADPCM Image Resolution PAL: 1080P(1920X1080), 720P(1280X720), WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704x288), CIF(352x288); NTSC: 1080P(1920X1080), 720P(1280X720), WD1(928X480), WHD1(928X240), WCIF(464X240), D1(704x480),
756 4-10HD1(704x240), CIF(352x240); Digital:1080P(1920X1080); 720P(1280X720); Image Quality 1-8 levels adjustable (1 is the best) Recording Mode Boot up/Manual/Schedule/Alarm Pre- recording 0-60minutes Post-recording 0-30 minutes Mirror/Dual Recording Support Playback Playback Channel 1 channel by local playback Search Mode Date/time, channel, event Network 3G/4G Support LE910 and MC7354 module WIFI 802.11b/g/n/ac (2.4GHz and 5.8GHz) IPC Ethernet(Back) 2 x10/100 M RJ45 ports(One connect CAM, the other One connect extended 3G/4G Router) IPC Ethernet(Front) 1 x10/100/1000M RJ45 port(Connect PC for only testing) Locating GPS Location tracking, speed detection and time sync Storage Hard disk + SD card 1 x HDD + 1 x SD card Interface USB 2 x USB2.0 (Type A) + 1 x USB2.0 (Type B) SD 1 x SD slot Sensor 8 inputs, 2 outputs Panic 1 x Panic RS232 1 x ACC RS485 1 x Extend GPS interface J1939 2 x CAN 12V Out 2 x DC12V/1A Out ESATA 1 x ESATA Power Input DC8-30V Max Power Consumption 40W Standby Power Consumption ≈0W Physical Characteristic Dimension (L × W × H)(mm) 320.5 x 187.4 x 99mm Weight 3.2 Kg (Without HDD) Environment Operating Temperature -10℃~ +70℃; -40℃~ +70℃(With heater) Operating Relative Humidity 8%-90% (No Condense)
756 5-101.3. DIMENSION Unit: mm
756 6-101.4. PANEL INTERFACE Front panel Serial No. Print Description 1 AUDIO Audio out 2 VIDEO Video out 3 PWR Power LED 4 HTR HTR LED 5 REC Recording LED 6 FLT FLT LED 7 ALM Alarm LED 8 VLOSS VLOSS LED 9 USB 2 x USB 2.0 10 RJ45 1 x 10/100/1000M RJ45 11 WAKE Wake Button
756 7-10Rearpanel:Serial No. Print Description 1 Power DC8-30V power input 2 CAM5-6 IP Camera input 5-6 3 WAN Connect extended 3G/4G Router 4 USB USB2.0 port (Type B/ to connect fire proof box) 5 EXT HDD ESATA Connector 6 CAMERAS AHD A/V input1~4 8 WIFI WIFI 1-2 antenna port(2.4GHz & 5.8GHz) 9 CELL 3G/4G antenna port 10 GPS GPS antenna port 11 INPUT Sensor input 12 J1939 2 x CAN Ports 13 AUX 2 x DC12V/1A Out Ports 14 PANIC 1 x Panic Port 15 ACC 1 x ACC Port 16 GPS 1 x Extended GPS Port 
756 8-102. FREQUENTLY ASKED QUESTIONS 1) The system can’t start? Usually this problem results from the incorrect power connection. Please follow below steps to check the power connection: 1. Check the input power, whether the power wire is connected correctly, whether the ground wire is connected back to the battery, and whether the fuse on the power wire is in good condition. 2. Check whether the ACC signal wire input to the power is with voltage higher than 7 V. 3. Check whether the device key is closed. 2) The MDVR restarts uninterruptedly? Please follow below steps to check it: 1. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up voltage of the device, the device would always restart. 2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check whether it is broken down. 3) The device can’t record? Usually this problem results from the storage disk or camera. Please follow below steps to check it: 1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk can be read normally in computer. 2. Check whether the storage disk is formatted. The storage disk should be formatted before normally storing record files. 3. Check whether there is video signal input into the device from camera, and whether there is video/image on the screen. 4) There is no voice in record file? Please follow below steps to check it: 1. Check whether there is an external pickup, or whether the camera features with the function of audio collection. 2. Access to Video Channel Settings, check if Audio is set on. 3. There must be video input into the channel for recording and it must record normally. 5) The GPS works abnormally? Please follow below steps to check it: 1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna holder behind the host device. 2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may cause it not to receive signals. 3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or elevated roads, thunderstorms or other weather influence, etc. can also cause signal loss or receiving wrong signals. 6) The device can’t shutdown in ignition switch mode? Please follow below steps to check it: 1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACC yellow line when the key is turned off. 2. If the device has been set with schedule recording, it can’t shutdown if it is still during recording time
756 9-10of the task table. 7) How to install the WIFI antenna? The antenna must be installed on unobstructed place of the roof, and be fixed with glue. 8) The device cannot be shut down when in ignition ON/OFF mode. Check if the ACC signal wiring is correct and if there is voltage for ACC signal line after the key is turned off . If you have set timing recording, and at the current time it is still in task recording, the device may be impossible to be shut down. 9) GPS anomaly. Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPS antenna pedestal on the back of the MDVR device. Check if the antenna connector is blocked and make sure the antenna connector not be covered by other things. Trees block, being inside the tunnel, driving near tall buildings or viaduct, thunderstorms and other environmental effects may also cause to receive no GPS signal or error signal. 10) No voice in video files. See if there is an external microphone, or if the camera cannot capture audio; Enter into the video channel settings, then check if the audio is open; Ensure video input and normal recording, on which the audio recording channels must be based. 11) The device doesn’t record. Make sure the storage part is installed and of fine contact, the data can be read on PC, and the storage device is not formatted. Check if there are video signal input to the main device, and whether there are video images in the channel pictures. 12) Why has the MDVR device always been in a state of restart? Check whether the MDVR device voltage is insufficient. If the device voltage does not reach the start voltage, the device will restart. Hard disk or SD card may cause the MDVR device unable to start. You need to remove the storage device and then boot up to verify whether it is caused by the storage device. 13) Why the MDVR device cannot start? Check the device input power to see if the power wiring is correct, if there is ground wire connected back to the battery, and if the fuse of the power wire is n good condition; Check whether there is voltage(more than 7V) on power input ACC signal wire; Check whether the hard disk key is turned off. 14) What is the log in user name and password for new device? The default user name and password are both “admin”. The device password can be set as empty. 15) In the ON/OFF of basic settings, the low voltage protection is 8V, why? After testing, when the battery is lower than 8V, the voltage will lower down quickly. Therefore the lowest voltage is set to be 8V. When it is lower than 8V, the MDVR device will recognize it as external power-off and then enter into shutdown state.
756 10 -103. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu