Radio Shack 3301186T 900 MHz Stereo Transmitter User Manual

RadioShack Corporation 900 MHz Stereo Transmitter www RadioShack with In Line CircleR eps

a href="https://usermanual.wiki/Radio-Shack" itemprop="url"> Radio Shack >

User Manual

OWNER’S MANUAL — Please read before using this equipment.© 2000 RadioShack Corporation. All Rights Reserved.RadioShack and RadioShack.com are trademarksused by RadioShack Corporation.900 MHz Wireless Stereo HeadphonesYour RadioShack Rechargeable 900 MHzWireless Stereo Headphones use the 900MHz band to deliver high-quality stereosound to almost anywhere in or around yourhome. Your headphones’ three selectablechannels, PLL (Phase-Locked Loop) circuitryand built-in antenna give you precise tuning,so you can enjoy your favorite sounds with-out disturbing others while you exercise orwork around your yard or house — up to 150feet away from your stereo. Power/Transmitter Indicator — lightsgreen when the AC adapter is correctlyplugged in and turns amber when the trans-mitter is on.Charging Indicator — lights red when thebattery is charging.THE FCC WANTS YOU TO KNOWYour headphones might cause TV or radiointerference even when they are operatingproperly. To determine whether your head-phones are causing the interference, turn offthe headphones. If the interference goesaway, your headphones are causing the in-terference. Try to eliminate the interference by:• moving your headphones’ transmitteraway from the receiver• connecting your headphones’ transmit-ter to an outlet that is on a different elec-trical circuit from the receiver• contacting your local RadioShack storefor helpIf you cannot eliminate the interference, theFCC requires that you stop using your head-phones.Warning: Changes or modifications to thisunit not expressly approved by the party re-sponsible for compliance could void the us-er’s authority to operate the unit.Notes: • This equipment has been tested andfound to comply with the limits for aClass B digital device, pursuant to Part15 of the FCC Rules. These limits aredesigned to provide reasonable protec-tion against harmful interference in aresidential installation. This equipmentgenerates, uses and can radiate radiofrequency energy and, if not installedand used in accordance with the instruc-tions, may cause harmful interference toradio communications.• Your headphones are subject to interfer-ence from other devices, such as cord-less phones, wireless speakers, andother wireless headphones that operateon the same frequencies. If you experi-ence interference, try moving the head-phones away from the other device.PREPARATIONChoosing a LocationMany factors affect the range of your system.To achieve the best performance:• Position the transmitter as far as possi-ble from other electronic devices suchas TVs, receivers, or VCRs. Radio inter-33-1186.fm Page 1 Tuesday, October 31, 2000 4:48 PM
2ference from these devices could affectyour system’s performance.• Position the transmitter away from largemetal objects, as these could block yourtransmitter’s signals.• Try several locations for the transmitter.Select the location that provides the bestperformance.Your system’s overall performance dependson your home’s construction method, the oth-er devices near the system, and other radiofrequency sources in your home (such ascordless telephones).Using AC PowerUse the supplied 12V, 250mA AC adapter toconnect the transmitter to AC power.Cautions:• You must use a Class 2 power sourcethat supplies 12 volts DC and delivers atleast 250mA. Its center tip must be set topositive and its plug must fit the transmit-ter's DC 12V jack. The supplied adaptermeets these specifications. Using anadapter that does not meet these specifi-cations could damage the transmitter orthe adapter.• Always connect the AC adapter to thetransmitter before you connect it to ACpower. When you finish, disconnect theadapter from AC power before you dis-connect it from the transmitter.Plug the supplied AC adapter’s barrel pluginto the transmitter’s DC 12V jack, then plugthe adapter into a standard AC outlet.Charging the Rechargeable Battery PacksTo power the headphones, use the suppliednickel-metal-hydride rechargeable batterypacks. There are two batteries supplied, soyou can alternately charge one and use theother.Your transmitter has a built-in charger tocharge the rechargeable battery pack. Whenthe headphones are not in use, the batterypack can be continuously charged over sever-al days.Before using your headphones for the firsttime, you must charge the battery pack for atleast 24 hours. If the headphones’ range de-creases, you do not hear sound from the au-dio source, or the headphones’ POWERindicator is blinking, recharge the batteries. Ittakes 12 to 14 hours to completely rechargethe batteries.To charge the battery pack, plug it into the transmitter’s charging portal. The battery pack automatically be-gins charging and the CHARGE indica-tor lights. When charging is complete, unplug the bat-tery pack. The indicator turns off.Note: You can charge the battery pack withthe transmitter set to on or off.Installing a Battery Pack1. Remove the battery com-partment cover on the left earpiece by pressing the sides of the cover and lifting it off.Battery PackCharging PortalPOWER33-1186.fm Page 2 Tuesday, October 31, 2000 4:48 PM
Download:
Mirror Download [FCC.gov]
Document ID133023
Application IDCuNM01VsXcp35AYcuV7K4Q==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.08kB (176005 bits)
Date Submitted2001-01-18 00:00:00
Date Available2001-01-18 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat Distiller 3.02
Document Lastmod0000-00-00 00:00:00
Document Titlewww RadioShack with In-Line CircleR.eps
Document CreatorAdobe Illustrator(TM) 7.0
Document Author: Jonathan L Haker
FCC ID Filing: AAO3301186T

Navigation menu