Radio Shack 2101849 User Manual User Instructions

RadioShack Corporation User Instructions

User Instructions

DRAFT OF BLISTER CARD OF 21-1849March 13, 2002Prepared By Headline I & C Ltd.,These radios make keeping in touch fun and easy. Whether playing inside or outdoors, theselicense-free, 2way radios fit nicely in the palm of your hand. You can talk to your friends in thenext room, next door and around the neighborhood. Use them at shopping malls, amusementparks or sports events to stay in touch with family and friends. These cool radios feature “auto-squelch”, which means you will not hear anything on the channel unless someone is transmittingnearby on the same channel. The radio automatically switches to sleep mode if not used for sixseconds, and wakes up when it receives a transmission or you press any key.Installing batteries,Your radio uses three “AAA” batteries for power, For the best performance, we recommendRadioShack alkaline batteries.Note ; You can also use NI-CD/Ni-MH rechargeable batteries in the radio and recharge them,using a separate battery charger, available at your local RadioShack store.1. The way to exist the menu, a) when press PTT button b) when press Call button c) when nobutton touching for 30 seconds d) when go through the end of the menu.2. Install the batteries, matching the polarity symbols(+ and -) inside.3. Replace the coverThe radio’s range decreases as the battery power decreases, To ensure maximum range, keepfresh batteries in the radio.WARNING : Dispose of old batteries promptly and properly. Do not burn or bury them.CAUTION : Do not mix old and new batteries, different types of batteries(standard, alkaline orrechargeable) or rechargeable batteries of different capacities.Using the radio1. To turn on the radio, press power button for 2 seconds2. Adjust the volume to the desired listening level by pressing up/down button.3. To enter to the memu mode and select CH, press Mode button once and then pressup/down button for the channel you want.4. To make the melody ON or OFF, press Mode button two times and then press up/downbutton.5. To make confirmation tone ON or OFF, press Mode button three times and then pressup/down button.6. To talk, hold down PTT. When the TX/BATT indicator lights, speak in to the microphone.Note : If Low Battery blinks when PTT is not held down, replace the batteries.When you finish speaking, release PTT.Talk confirmationYou can set the radio so a confirmation tone sounds when you release PTT. The tone alertsanother person you are talking to that you have finished talking.The belt clipTo attach the belt clip, slide it down until it locks into place. To remove the belt clip, pull the taband slide the belt clip up.Using a wrist strapYou can attach an optional wrist strap or pager chain(neither supplied) to the wrist strap hole
behind OFF.Auto power saveYour radio saves battery life by reducing the power the radio uses until it receives a signal or youpress a key. Because the receiving radio might be suing power save mode, wait about 5 secondsafter pressing PTT to allow the receiving radio to come to full power before speaking into themicrophone.FCC informationImportant : Do not open your radio to make any internal adjustments. Your radio is set up totransmit a regulated signal on an assigned frequency. It is against the law to alter or adjust thesetting s inside the radio to exceed those limitations. Any adjustments made to you radio mist bemade by a qualified technician using the proper test equipment. To be safe and sure: Never openyour radio’s case. Never change or replace anything in your radio except the batteries.Your radio might cause TV or radio interference even when it is operating properly. To determinewhether your radio is causing the interference, turn it off. if the interference goes away, yourradio is causing it. Try to eliminate the interference by: Moving your radio away from the receiver.Calling your local RadioShack store for help.Using your transceiver as described in this manual exposes you to FR energy well below theFCC’s recommended limits.This device complies with Part 15 of the FCC Rules, Operation is subject to the following twoconditions : (1) This device may not cause harmful interference, and (2) this device mist acceptany interference received, including interference that may cause undesired operation.CareTo enjoy your radio for a long time, keep the radio dry. If it gets wet, wipe it dry immediately. Useand store the radio only in normal temperature environments. Handle the radio gently andcarefully. Do not drop it. Keep the radio away from dust and dirt. Wipe the radio with a damp clithoccasionally to keep it looking new.Modifying or tampering with the radio’s internal components can cause a malfunction and mightinvalidate the radio’s warranty and void your FCC authorization to operate it. If your radio is notperforming as it should, take it to your local RadioShack store for assistance.SpecificationsChannel 14Power output 500mW ERP operating temperature - 4 to + 122’f(-20 to +50’c)Frequency 462.5625 ~ 467.7125MHz. Weight (with batteries) 4.2 oz. (119g)Battery Life :Transmit mode Standby modeAlkaline 3 hours(1050mAh) Alkaline 18 hours(1050mAh)Ni-Cd 1 hours(300mAh) Ni- Cd 5 hours(300mAh)Ni-MH 2 hours(600mAh) Ni-MH 10 hours(600mAh)Specifications are typical : individual units might vary. Specifications are subject to change andimprovement without notice

Navigation menu