Radio Shack 3201257R Receiver for Wireless Microphone User Manual 32 1257 Eng

RadioShack Corporation Receiver for Wireless Microphone 32 1257 Eng

User Manual

ADDENDUM“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device  could   result  in   the   system   exceeding  the   RFFCC NOTICEFor RF exposureexposure requirements.”Warning: Modifying, tampering with, or adjusting this unit, or replacing any transmitter component (crystal, semiconductor, etc.) may result in a violation of the FCC rules.This wireless microphone system complies with Part 90 of the FCC Rules. There are three frequencies available for the system. You must obtain a license for each frequency you plan to use before operating your system. One license can include both frequencies. Visit http://wireless.fcc.gov/uls/, or call your local FCC office to apply for your license. Your ability to obtain a license will depend on how you plan to use the system.Wireless lapel microphone system        32-1257
IMPORTANTAE0019AAA1Printed in ChinaTo maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimetres) from your face and speak in a normal voice, with the antenna pointed up and away fromthe face. Ensure that the antenna is at least 1 inch (2.5 centimetres) from your body when you are using your wireless microphone.Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitterand may violate FCC regulations.Your wireless microphone contains a low power transmitter. When the EUT is powered on, it sends out radio frequency (RF) signals. In August 1996, the FederalCommunications Commissions (FCC) adopted RF exposure guidelines with safety levels for wireless devices.For devices less than 200mW ERPSAFETY INFORMATION

Navigation menu