Raytheon IDS M3-UHF-450 100W UHF BASE STATION User Manual

JPS COMMUNICATIONS, INC. 100W UHF BASE STATION Users Manual

a href="https://usermanual.wiki/Raytheon-IDS" itemprop="url"> Raytheon IDS >

Users Manual

MASTR III Repeater Calibration Procedure 5/16/2011 Raytheon JPS Communications, Inc. 2-1 8/22/2011 1 Repeater Configuration 1.1 Radio Programming The radio should be programmed using the Harris MASTR III Control Shelf Programming application M3.BAT (MS-DOS batch file) using a standard RS232 serial cable connected to the MASTR III Data Port (Left Receiver or Right Receiver) and the host PC. The Bandwidth should be set for 12.5kHz Narrowband operation. Default factory settings are used for all other parameters except as required by the user. 1.1.1 Options Menu F7 The Bandwidth should be set for 12.5kHz Narrowband operation. Enable “Digital Pager” and “P25”. Default factory settings are used for all other parameters except as required by the user. Figure 1-1 Bandwidth Setting 2 Radio Calibration using PCCT Radio calibration requires a Radio Service Test Set with APCO 25 capability. The following example uses an Aeroflex 3920. 2.1.1 Equipment Set Up
Download:
Mirror Download [FCC.gov]
Document ID1612482
Application IDAeBODPNkta3wRX5Rumpm0Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize181.36kB (2267049 bits)
Date Submitted2011-12-30 00:00:00
Date Available2011-12-30 00:00:00
Creation Date2011-08-22 09:14:37
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2011-08-22 09:14:37
Document TitleMicrosoft Word - Harris MASTR III Repeater Calibration Procedure 5_17_2011.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: mikeb
FCC ID Filing: ZPRM3-UHF-450

Navigation menu