Realtek Semiconductor RTL8822BE 802.11a/b/g/n/acRTL8822BECombomodule User Manual User Guide

Realtek Semiconductor Corp. 802.11a/b/g/n/acRTL8822BECombomodule User Guide

Manual - User Guide

User Guide
© Copyright 2015 HP Development Company,
L.P.
Microsoft and Windows are trademarks of the
Microsoft group of companies.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, & DTS and
the Symbol together are registered
trademarks, and DTS Studio Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved .
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
First Edition: August 2015
Document Part Number: 823891-001
Product notice
This guide describes features that are common
to most models. Some features may not be
available on your computer.
Not all features are available in all editions of
Windows. This computer may require upgraded
and/or separately purchased hardware, drivers
and/or software to take full advantage of
Windows functionality. Go to
http://www.microsoft.com for details.
To access the latest user guide, go to
http://www.hp.com/support, and select your
country. Select Drivers & Downloads, and then
follow the on-screen instructions.
Software terms
By installing, copying, downloading, or
otherwise using any software product
preinstalled on this computer, you agree to be
bound by the terms of the HP End User License
Agreement (EULA). If you do not accept these
license terms, your sole remedy is to return the
entire unused product (hardware and
software) within 14 days for a full refund
subject to the refund policy of your seller.
For any further information or to request a full
refund of the price of the computer, please
contact your seller.
Table of contents
1 Getting information ....................................................................................................................................... 1
2 Setting up your computer .............................................................................................................................. 3
Connecting to the Internet (select products only) ................................................................................................ 4
3 Navigating the screen .................................................................................................................................... 5
Using touch gestures ............................................................................................................................................. 5
Using the keyboard and mouse ............................................................................................................................. 5
4 Protecting your computer .............................................................................................................................. 8
Computer security features ................................................................................................................................... 8
5 Troubleshooting ........................................................................................................................................... 9
Computer does not start ....................................................................................................................................... 9
Power ................................................................................................................................................................... 10
Display (monitor) (select products only) ............................................................................................................ 10
Keyboard and mouse (with cable) ....................................................................................................................... 11
Keyboard and mouse (wireless) .......................................................................................................................... 11
Speakers and sound ............................................................................................................................................ 11
Internet access .................................................................................................................................................... 12
Software troubleshooting ................................................................................................................................... 13
6 Backing up, restoring, and recovering ........................................................................................................... 15
Creating recovery media and backups ................................................................................................................ 15
Using Windows tools ........................................................................................................................................... 16
Restore and recovery .......................................................................................................................................... 17
7 Maintenance ............................................................................................................................................... 21
Schedules and tasks ............................................................................................................................................ 21
Cleaning your computer ...................................................................................................................................... 22
8 Using HP PC Hardware Diagnostics (UEFI) ...................................................................................................... 24
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device .................................................................... 24
iii
9 Specifications ............................................................................................................................................. 26
Operating specifications ...................................................................................................................................... 26
10 Electrostatic Discharge .............................................................................................................................. 27
11 Accessibility .............................................................................................................................................. 28
Supported assistive technologies ....................................................................................................................... 28
Contacting support .............................................................................................................................................. 28
12 Support information .................................................................................................................................. 29
How to get help .................................................................................................................................................... 29
Where to get help ................................................................................................................................................ 29
Customer support for repairs .............................................................................................................................. 30
Before upgrading your hardware ........................................................................................................................ 30
Index ............................................................................................................................................................. 31
iv
1 Getting information
Tasks Instructions
Set up your computer Setup Instructions or Quick Setup poster
– or –
See Setting up your computer on page 3.
Connect to the Internet See Connecting to the Internet (select products only) on page 4.
Recover factory settings See Backing up, restoring, and recovering on page 15.
See how-to videos about using the
features of your computer
Go to http://www.hp.com/supportvideos (English only).
Learn how to use the Windows®
operating system
Find Windows password information
Find links to driver updates
Read frequently asked questions
Get started app:
Select the Start button, and then select the Get started app.
Troubleshoot the most common
computer hardware and software issues
See Troubleshooting on page 9.
Find electronic user guides and
specifications for your computer model
Order parts and find additional
troubleshooting help
Go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Upgrade or replace components of your
computer
Go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Find computer warranty information HP Worldwide Limited Warranty and Technical Support guide:
1. Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
2. Select My PC, and then select Warranty and services.
‒ or –
Go to http://www.hp.com/go/orderdocuments.
Get up-to-date information and help
from the Windows community
Go to http://www.hp.com/support/consumer-forum.
Connect to a TV (select products only) Go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Maintain your computer HP Support Assistant maintains your computer performance and resolves problems quickly by
using automated updates, diagnostic tools, and guided assistance.
Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
1
Tasks Instructions
– or –
See Maintenance on page 21.
Find safety and regulatory notices Regulatory, Safety and Environmental Notices:
To access this document:
1. Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
2. Select My PC, select the Specifications tab, and then select User Guides.
– or –
Go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Find ergonomic information Safety & Comfort Guide:
1. Select My PC, select the Specifications tab, and then select User Guides.
Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
2. Select My PC, select the Specifications tab, and then select User Guides.
– or –
Go to http://www.hp.com/ergo.
2 Chapter 1 Getting information
2 Setting up your computer
WARNING! To reduce the risk of electrical shock or damage to your equipment:
Place the computer in a location away from water, dust, moisture, and soot. These environmental
factors can increase the temperature inside your computer or cause fire or electrocution.
Do not disable the power cord grounding pin. The grounding pin is an important safety feature.
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet. To prevent
direct exposure to the laser beam, do not try to open the enclosure of the CD or DVD drive.
The power supply is preset for the country or region in which you purchased your computer. If you
move, check the voltage requirements for your new location before plugging the computer into an AC
outlet.
To reduce the risk of serious injury read the Safety & Comfort Guide. To access this guide, go to
http://www.hp.com/ergo.
1. Place the computer so that all ventilation openings are unobstructed and cabling is not in a walkway or
where it can be stepped on or damaged by placing furniture on it.
2. When connecting all power cords from the monitor, computer, and accessories to an uninterruptible
power supply (UPS), it is recommended that you use a power surge protection detection device. If the
computer has a television tuner, or a modem or telephone connection, protect the computer by using
surge protection with these signal inputs as well. Connect the television cable or the telephone line cord
to the surge protection device, and then connect the device to the computer.
3. Download and install operating system updates.
a. Find out what operating system and version your computer is currently running.
Select the Start button, select Settings, select System, and then click About.
b. Open your internet browser, and then go to http://welcome.hp.com/country/us/en/
wwcontact_us.html.
c. If necessary, click your country and language, click Support, and then click Download drivers.
d. Enter your computer model name and number in the Find by product field, and then click Go.
e. If necessary, select your computer model from Product search results.
f. Select your computer operating system.
g. Click Download next to each update you wish to download.
h. Follow the on-screen instructions to install each downloaded update.
4. Look in the computer box for additional printed details or updates.
After you complete the initial computer setup, you might want to install additional hardware devices or
software. Check the operating system, memory, and other requirements listed for these items before
purchasing them for your computer. Follow the software manufacturer's directions to install the new
software.
3
NOTE: Use only licensed original software. Installing copied software could result in an unstable
installation, infect the computer with a virus, or be illegal.
NOTE: A security solution is designed as a deterrent, but it might not be able to prevent theft, mishandling,
or software attacks.
Connecting to the Internet (select products only)
To connect to a wireless network:
NOTE: To set up a wireless local area network (WLAN) and connect to the Internet, you need a broadband
modem (either DSL or cable) (purchased separately), high-speed Internet service purchased from an Internet
service provider, and a wireless router (purchased separately).
1. Be sure that the WLAN device is on.
2. Select the network status icon in the taskbar, and then connect to one of the available networks.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and
then select Next to complete the connection.
NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE: If you do not see the WLAN you want to connect to, right-click the network status icon in the
taskbar, and then select Open Network and Sharing Center. Select Set up a new connection or
network. A list of options is displayed, allowing you to manually search for and connect to a network or
to create a new network connection.
3. Follow the on-screen instructions to complete the connection.
After the connection is made, select the network status icon in the notification area, at the far right of the
taskbar, to verify the name and status of the connection.
For more information about wireless technology, see the information and Website links provided in the Get
started app. Select the Start button, and then select the Get started app.
To connect to a wired network:
1. Plug an 8-pin, RJ-45 (network) cable into the network jack on the computer.
2. Plug the other end of the network cable into a network wall jack or router.
NOTE: If the network cable contains noise suppression circuitry, which prevents interference from TV
and radio reception, orient the circuitry end of the cable toward the computer.
If you have issues connecting to the Internet, see Internet access on page 12.
4 Chapter 2 Setting up your computer
3 Navigating the screen
You can navigate the computer screen in the following ways:
Using touch gestures (select products only)
Using the keyboard and mouse
Select computer models have special action keys or hot key functions on the keyboard to perform routine
tasks.
Using touch gestures
You can customize the touch gestures by changing settings, button configurations, click speed, and pointer
options.
Type control panel in the taskbar search box, and then select Control Panel. Select Hardware and
Sound. Under Devices and Printers, select Mouse.
NOTE: Touch gestures are not supported in all apps.
Using the keyboard and mouse
The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as you do
using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific
functions.
TIP: The Windows key on the keyboard allows you to quickly return to the Start screen from an open
app or the Windows desktop. Press the key again to return to the previous screen.
NOTE: Depending on the country or region, the keys and keyboard functions of your keyboard may be
different from those discussed in this section.
Using the action keys or hot keys
You can quickly access information or perform functions by using certain keys and key combinations.
Action keys—Perform an assigned function. The icons on the function keys at the top of the keyboard
illustrate the assigned function for that key.
To use an action key function, press and hold the key.
Hot keys—A combination of the fn key and the esc key, the spacebar, or the appropriate action key.
To use a hot key, briefly press the fn key, and then briefly press the second key of the combination.
Depending on the computer model, your keyboard may support the following keys.
Icon Description
Lists open apps.
Using touch gestures 5
Icon Description
Snaps open apps.
Switches between open apps.
Shows the available commands in an open app.
Shows or hides the desktop.
Opens the Search charm.
Opens the Share charm.
Opens the Devices charm.
Opens the Settings charm.
Plays the previous track of an audio CD or the previous section of a DVD or a BD.
Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.
Plays the next track of an audio CD or the next section of a DVD or a BD.
Stops audio or video playback of an audio CD, a DVD, or a BD.
Opens the Print Options window.
Pastes the contents of the Clipboard.
Initiates Sleep, which saves your information in system memory. The display and other system components
turn off and power is conserved.
To exit Sleep, briefly press the power button.
CAUTION: To reduce the risk of information loss, save your work before initiating Sleep.
Mutes or restores speaker sound.
6 Chapter 3 Navigating the screen
Icon Description
Decreases speaker volume incrementally as long as you hold down the key.
Increases speaker volume incrementally as long as you hold down the key.
Displays options for a selected object.
Using the keyboard and mouse 7
4 Protecting your computer
Your computer includes features that help protect the integrity of your system and its data from
unauthorized access. Review these features to ensure proper use.
Computer security features
Computer risk Computer feature
Unauthorized use of the computer or
user account
User password
A password is a group of characters that you choose. These characters must be entered to authorize
access to your computer information.
Unauthorized access to Setup Utility,
BIOS settings, and other system
identification information
Administrator password
Computer viruses Antivirus software
The free trial antivirus software that is preinstalled on your computer can detect most viruses, remove
them, and, in most cases, repair damage caused by viruses. For protection against new viruses beyond the
trial period, purchase an extended service.
Unauthorized access to data and
ongoing threats to the computer
Firewall software
Windows includes firewall software preinstalled on the computer.
The antivirus software, which is preinstalled on the computer, includes firewall software.
Windows critical security updates
Updates to the Windows operating system
8 Chapter 4 Protecting your computer
5 Troubleshooting
If you have problems using any peripheral devices such as a monitor, or a printer, with your computer, for
more extensive troubleshooting refer to the documentation provided by the product manufacturer. The
following tables present some issues you might encounter while installing, starting up, or using your
computer and suggest possible solutions.
For more information or for additional troubleshooting options, go to http://welcome.hp.com/
country/us/en/wwcontact_us.html, and then search for your computer model.
Computer does not start
Symptom Possible solution
Error message: hard
drive error
1. Restart the computer.
a. Press ctrl+alt+delete.
b. Select the Power icon in the lower-right corner of the screen, and then select Restart.
– or –
Press and hold the power button on the computer for 5 or more seconds to turn off the computer, and then press the
button to turn on the computer.
2. If Windows opens, immediately back up all important data to a backup hard drive.
3. Contact support (regardless of whether Windows started or not).
Computer will not turn
on or start
Be sure that the cables connecting the computer to the AC outlet are plugged in properly. The green power supply light on
the computer should be on. If it is not, try a different AC outlet. If you are still having trouble, contact support.
Be sure that the operating voltage of the electrical outlet is appropriate for the electrical voltage of the computer.
Test the AC outlet by plugging a different electrical device into it.
If possible, remove any outlet filters and stabilizers, then insert the power plug directly into the electrical outlet.
Disconnect all peripheral devices, then press and hold the power button down for at least 15 seconds. Press the power
button to turn on the computer.
If the display (monitor) is blank, the monitor might not be properly connected. Connect the monitor to the computer, plug
the power cord into an AC outlet, and then turn the monitor on. See Display (monitor) (select products only) on page 10.
Computer is not
responding
1. Press ctrl+alt+delete.
2. Select Task Manager.
3. Select any programs that are not responding, and then click End task.
If closing programs does not resolve the problem, restart the computer.
1. Press ctrl+alt+delete.
2. Select the Power icon in the lower-right corner of the screen, and then select Restart.
– or –
Computer does not start 9
Symptom Possible solution
Press and hold the power button on the computer for 5 or more seconds to turn off the computer, and then press the
power button to turn on the computer.
Error message: Invalid
system disk or Non-
System disk or Disk
error
When drive activity stops, remove the optical disc inside the optical drive, and then press the spacebar on the keyboard.
Power
Symptom Possible solution
Computer does not
turn off when the
power button is
pressed
Press and hold the power button until the computer turns off. Then turn the computer on again.
Computer shuts down
automatically
The computer might be in an exceedingly hot environment. Let it cool down.
Be sure that computer air vents are not blocked. See Cleaning your computer on page 22.
NOTE: If your computer has an internal fan, be sure that the internal fan is running.
Display (monitor) (select products only)
Symptom Possible solution
Screen is blank, and
monitor power light is not
lit
Reconnect the power cable to the back of the monitor and to the AC outlet.
Press the power button on the monitor.
Screen is blank Press the space bar on the keyboard or move the mouse to redisplay the screen image.
Press the Sleep button (select products only), or esc, to resume from Sleep mode.
Press the power button to turn on the computer.
Inspect the monitor cable for bent pins.
If any of the pins are bent, replace the monitor cable.
If no pins are bent, reconnect the monitor cable to the computer.
Images on the screen are
too large or too small, or
the images are fuzzy
Adjust the monitor resolution setting in Windows.
1. Right-click an empty area of the desktop, and then click Screen resolution.
2. Select a different resolution from the drop-down menu.
3. Click Apply, and then click Keep changes.
NOTE: In addition to the information listed here, also refer to the documentation that came with your monitor.
10 Chapter 5 Troubleshooting
Keyboard and mouse (with cable)
Symptom Possible solution
Keyboard commands and
typing are not recognized
by the computer
Use the mouse to turn off the computer. Disconnect and reconnect the keyboard to the back of your computer, and
then restart your computer.
Mouse (with cable) does
not work or is not detected
Disconnect and reconnect the mouse cable to your computer.
If the mouse is still not detected, turn off the computer, disconnect and reconnect the mouse cable, and then restart
the computer.
Cursor does not respond to
the arrow keys on the
number keypad
Press num lock on the keyboard to turn off num lock, so that the arrow keys on the number keypad can be used.
Cursor does not respond to
mouse movement
1. Press alt+tab to navigate to an open program.
2. Press ctrl+s to save your changes in the selected program (ctrl+s is the keyboard shortcut for the Save command
on most—not all—programs).
3. Repeat step 1 and step 2 to save changes in all open programs.
4. Press the power button to turn off the computer.
5. After the shutdown is complete, disconnect and reconnect the mouse cable to the back of your computer, and
then restart your computer.
Keyboard and mouse (wireless)
Symptom Possible solution
Wireless keyboard or
mouse does not work or is
not detected
Be sure that you are using the wireless keyboard or wireless mouse within range of the transceiver,
approximately 10 meters (32 feet) for normal use, and within 30 cm (12 inches) during initial setup or for re-
synchronization.
Be sure that the mouse is not in Suspend mode, which occurs after 20 minutes of inactivity. Click the left mouse
button to reactivate the mouse.
Replace the batteries in the keyboard and/or mouse.
Speakers and sound
Symptom Possible solution
Volume is very low or
unsatisfactory
Be sure that you connected the speakers to the audio-out (black) jack on the back of the computer. (Additional audio
jacks are used for multiple-channel speakers.) Detached non-powered speakers (speakers without a separate power
source, such as batteries or a power cord) do not produce satisfactory sound. Replace the non-powered speakers with
powered speakers.
No sound is produced 1. Type control panel in the taskbar search box, and then select Control Panel. Select System and Security.
2. Under Security and Maintenance, select Troubleshoot common computer problems, and then select
Troubleshoot audio playback.
Be sure that you connected powered speakers and that they are turned on.
Turn off your computer, and then disconnect and reconnect the speakers. Be sure that the speakers are connected to
an audio jack, not a microphone or headphone jack.
Keyboard and mouse (with cable) 11
Symptom Possible solution
To resume from Sleep mode, press the Sleep button (select products only), or press esc.
Unplug headphones if they are connected to your computer (or speaker system).
Internet access
Symptom Possible solution
Cannot connect to the
Internet
1. Type control panel in the taskbar search box, and then select Control Panel.
2. Under Network and Sharing Center, select Connect to a network.
Verify that you are using the proper cables for your Internet connection type. Your computer might have a dial-up
modem and an Ethernet network adapter (also called a network interface card, or NIC). A modem uses a standard
telephone cable, whereas the network adapter uses a network cable, to connect to a local area network (LAN). Do not
connect a telephone cable to the network adapter, and do not connect a network cable to a telephone line; doing so
might damage the network adapter.
Run the wireless setup wizard.
1. Type control panel in the taskbar search box, and then select Control Panel. Select Network and Internet,
and then select Network and Sharing Center.
2. In the Network and Sharing Center window, select Set up a new connection or network to open the wizard, and
then follow the on-screen instructions.
If your system has an external antenna, try moving the antenna to a better position. If the antenna is internal, try
moving the computer.
Try to connect again later, or contact your ISP for assistance.
Cannot connect to the
Internet but there is no
error message
1. Right-click the network status icon in the notification area, at the far right of the taskbar.
2. Select Troubleshoot problems.
No network connection
icon in the notification area
1. Type repair in the taskbar search box, and then Select Identify and repair network problems.
2. Follow the on-screen instructions.
12 Chapter 5 Troubleshooting
Software troubleshooting
Symptom Possible solution
To resolve software
problems, try these
methods:
Turn the computer off completely, and then turn it on again.
Update the drivers. See “Updating device drivers,” in the next entry.
Restore your computer to a configuration that was in use before the software was installed. See "Microsoft System
Restore," in this table.
Reinstall the software program or hardware driver. See “Software program and hardware driver reinstallation,” in
this table.
Erase and reformat the hard drive, and then reinstall the operating system, programs, and drivers. This process
erases all the data files that you have created. See Backing up, restoring, and recovering on page 15.
Software programs
are slow to respond
Close unnecessary software programs.
Run virus scans and other system tools when the computer is not in use.
Stop startup applications (such as messaging software and multimedia applications) from loading.
1. Type msconfig in the taskbar search box, and then select msconfig.
NOTE: If you are prompted for an administrator password or confirmation, type the password or provide
confirmation.
2. From the General tab, select Selective startup.
3. Click the Startup tab, and then click Open Task Manager.
4. Select the startup items that you want to prevent from loading, and then click Disable.
NOTE: If you are unsure about an item, do not disable it.
5. If prompted, click Restart to restart the computer.
NOTE: To enable a program to load at startup, restart the computer and reverse these steps.
Disable nonessential graphics capabilities.
1. Type file explorer in the taskbar search box, and then select File Explorer.
2. Click the Computer menu, and then select Properties.
3. Click Advanced system settings.
NOTE: If you are prompted for an administrator password or confirmation, type the password or provide
confirmation.
4. Under Performance, click Settings.
5. From the Visual Effects tab, select Adjust for best performance, and then click OK.
Updating device
drivers
Complete the following procedure to update a driver, or to revert to an earlier version of the driver if the new one does not
solve your problem.
1. Type device manager in the taskbar search box, and then select Device Manager.
2. Select the arrow to expand the list of the type of device you want to update or roll back (for example, DVD/CD-ROM
drives).
3. Double-click the specific item (for example, HP DVD Writer 640b).
4. Select the Driver tab.
5. To update a driver, select Update Driver, and then follow the on-screen instructions.
– or –
To revert to an earlier version of a driver, select Roll Back Driver, and then follow the on-screen instructions.
Software troubleshooting 13
Symptom Possible solution
Microsoft System
Restore
If you have a problem that might be caused by software that you have installed on your computer, use System Restore to
return the computer to a previous restore point. You can also set restore points manually.
IMPORTANT: Always use this System Restore procedure before you use the System Recovery program.
For more information and steps, see the Get started app.
Select the Start button, and then select the Get started app.
Software program and
hardware driver
reinstallation
If any of your factory-installed software programs or hardware drivers are damaged, you can reinstall them by using HP
Recovery Manager (select products only).
NOTE: Do not use HP Recovery Manager to reinstall software programs provided on CDs or DVDs included in the
computer box. Reinstall these programs directly from the CDs or DVDs.
Before you uninstall a program, be sure that you have a way to reinstall it. Confirm that it is still available from the original
source (for example, discs or the Internet). Or, confirm that the program is in the list of programs you can reinstall from HP
Recovery Manager (see the steps directly below).
NOTE: Some features might not be available on systems that are shipped without a version of Microsoft Windows.
To check the list of installable programs or to reinstall a program in HP Recovery Manager:
Type recovery in the taskbar search box, select HP Recovery Manager, select Reinstall drivers and/or
applications, and then follow the on-screen instructions.
For information and steps to uninstall a program, see the Get started app.
Select the Start button, and then select the Get started app.
14 Chapter 5 Troubleshooting
6 Backing up, restoring, and recovering
This chapter provides information about the following processes. The information in the chapter is standard
procedure for most products.
Creating recovery media and backups
Restoring and recovering your system
For additional information, refer to the HP support assistant app.
Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
IMPORTANT: If you will be performing recovery procedures on a tablet, the tablet battery must be at least
70% charged before you start the recovery process.
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning any recovery process.
Creating recovery media and backups
The following methods of creating recovery media and backups are available on select products only. Choose
the available method according to your computer model.
Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This
step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall
the original operating system in cases where the hard drive is corrupted or has been replaced. For
information on creating recovery media, see Creating HP Recovery media (select products only)
on page 15. For information on the recovery options that are available using the recovery media, see
Using Windows tools on page 16.
Use Windows tools to create system restore points and create backups of personal information.
For more information, see Recovering using HP Recovery Manager on page 17.
NOTE: If storage is 32 GB or less, Microsoft System Restore is disabled by default.
Creating HP Recovery media (select products only)
If possible, check for the presence of the Recovery partition and the Windows partition. From the Start menu,
select File Explorer, and then select My computer.
If your computer does not list the Windows partition and the Recovery partition, you can obtain
recovery media for your system from support. See the Worldwide Telephone Numbers booklet included
with the computer. You can also find contact information on the HP website. Go to http://www.hp.com/
support, select your country or region, and follow the on-screen instructions.
Creating recovery media and backups 15
You can use Windows tools to create system restore points and create backups of personal information,
see Using Windows tools on page 16.
If your computer does list the Recovery partition and the Windows partition, you can use HP Recovery
Manager to create recovery media after you successfully set up the computer. HP Recovery media can
be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the
original operating system and software programs that were installed at the factory and then configures
the settings for the programs. HP Recovery media can also be used to customize the system or restore
the factory image if you replace the hard drive.
Only one set of recovery media can be created. Handle these recovery tools carefully, and keep
them in a safe place.
HP Recovery Manager examines the computer and determines the required storage capacity for
the media that will be required.
To create recovery discs, your computer must have an optical drive with DVD writer capability, and
you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use
rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE (rewritable Blu-ray)
discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a
high-quality blank USB flash drive.
If your computer does not include an integrated optical drive with DVD writer capability, but you
would like to create DVD recovery media, you can use an external optical drive (purchased
separately) to create recovery discs. If you use an external optical drive, it must be connected
directly to a USB port on the computer; the drive cannot be connected to a USB port on an external
device, such as a USB hub. If you cannot create DVD media yourself, you can obtain recovery discs
for your computer from HP. See the Worldwide Telephone Numbers booklet included with the
computer. You can also find contact information on the HP website. Go to http://www.hp.com/
support, select your country or region, and follow the on-screen instructions.
Be sure that the computer is connected to AC power before you begin creating the recovery media.
The creation process can take an hour or more. Do not interrupt the creation process.
If necessary, you can exit the program before you have finished creating all of the recovery DVDs.
HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery
Manager, you will be prompted to continue.
To create HP Recovery media:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps.
1. Type recovery in the taskbar search box, and then select HP Recovery Manager.
2. Select Create recovery media, and then follow the on-screen instructions.
If you ever need to recover the system, see Recovering using HP Recovery Manager on page 17.
Using Windows tools
You can create recovery media, system restore points, and backups of personal information using Windows
tools.
NOTE: If storage is 32 GB or less, Microsoft System Restore is disabled by default.
For more information and steps, see the Get started app.
Select the Start button, and then select the Get started app.
16 Chapter 6 Backing up, restoring, and recovering
Restore and recovery
There are several options for recovering your system. Choose the method that best matches your situation
and level of expertise:
IMPORTANT: Not all methods are available on all products.
Windows offers several options for restoring from backup, refreshing the computer, and resetting the
computer to its original state. For more information see the Get started app.
Select the Start button, and then select the Get started app.
If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers
and/or applications option (select products only) of HP Recovery Manager to reinstall the individual
application or driver.
Type recovery in the taskbar search box, select HP Recovery Manager, select Reinstall drivers
and/or applications, and then follow the on-screen instructions.
If you want to recover the Windows partition to original factory content, you can choose the System
Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media.
For more information, see Recovering using HP Recovery Manager on page 17. If you have not already
created recovery media, see Creating HP Recovery media (select products only) on page 15.
On select products, if you want to recover the computer's original factory partition and content, or if you
have replaced the hard drive, you can use the Factory Reset option of HP Recovery media. For more
information, see Recovering using HP Recovery Manager on page 17.
On select products, if you want to remove the recovery partition to reclaim hard drive space, HP
Recovery Manager offers the Remove Recovery Partition option.
For more information, see Removing the HP Recovery partition (select products only) on page 20.
Recovering using HP Recovery Manager
HP Recovery Manager software allows you to recover the computer to its original factory state by using the
HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery
partition (select products only). If you have not already created recovery media, see Creating HP Recovery
media (select products only) on page 15.
What you need to know before you get started
HP Recovery Manager recovers only software that was installed at the factory. For software not
provided with this computer, you must either download the software from the manufacturer's website
or reinstall the software from the media provided by the manufacturer.
IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct
computer issues.
HP Recovery media must be used if the computer hard drive fails. If you have not already created
recovery media, see Creating HP Recovery media (select products only) on page 15.
To use the Factory Reset option (select products only), you must use HP Recovery media. If you have
not already created recovery media, see Creating HP Recovery media (select products only) on page 15.
If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does
not work, you can obtain recovery media for your system from support. See the Worldwide Telephone
Numbers booklet included with the computer. You can also find contact information from the HP
Restore and recovery 17
website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen
instructions.
IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before
beginning recovery, back up any personal data you want to retain.
Using HP Recovery media, you can choose from one of the following recovery options:
NOTE: Only the options available for your computer display when you start the recovery process.
System Recovery—Reinstalls the original operating system, and then configures the settings for the
programs that were installed at the factory.
Factory Reset—Restores the computer to its original factory state by deleting all information from the
hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that
was installed at the factory.
The HP Recovery partition (select products only) allows System Recovery only.
Using the HP Recovery partition (select products only)
The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a
recovery USB flash drive. This type of recovery can be used only if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps (select products only).
1. Type recovery in the taskbar search box, select Recovery Manager, and then select HP Recovery
Environment.
- or-
For computers or tablets with keyboards attached, press f11 while the computer boots, or press and
hold f11 as you press the power button.
For tablets without keyboards:
Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button; then select f11.
2. Select Troubleshoot from the boot options menu.
3. Select Recovery Manager, and then follow the on-screen instructions.
Using HP Recovery media to recover
You can use HP Recovery media to recover the original system. This method can be used if your system does
not have an HP Recovery partition or if the hard drive is not working properly.
1. If possible, back up all personal files.
2. Insert the HP Recovery media, and then restart the computer.
NOTE: If the computer does not automatically restart in HP Recovery Manager, change the computer
boot order. See Changing the computer boot order on page 19.
3. Follow the on-screen instructions.
18 Chapter 6 Backing up, restoring, and recovering
Changing the computer boot order
If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is
the order of devices listed in BIOS where the computer looks for startup information. You can change the
selection to an optical drive or a USB flash drive.
To change the boot order:
IMPORTANT: For a tablet with a detachable keyboard, connect the keyboard to the keyboard dock before
beginning these steps.
1. Insert the HP Recovery media.
2. Access BIOS:
For computers or tablets with keyboards attached:
Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options.
For tablets without keyboards:
Turn on or restart the tablet, and then quickly hold down the volume down button; then select f9.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button; then select f9.
3. Select the optical drive or USB flash drive from which you want to boot.
4. Follow the on-screen instructions.
Restore and recovery 19
Removing the HP Recovery partition (select products only)
HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.
IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery
or create HP recovery media from the HP Recovery partition. So before you remove the Recovery partition,
create HP Recovery media; see Creating HP Recovery media (select products only) on page 15.
NOTE: The Remove Recovery Partition option is only available on products that support this function.
Follow these steps to remove the HP Recovery partition:
1. Type recovery in the taskbar search box, and then select HP Recovery Manager.
2. Select Remove Recovery Partition, and then follow the on-screen instructions.
20 Chapter 6 Backing up, restoring, and recovering
7 Maintenance
It is important that you perform simple maintenance of your computer to be sure that it works at peak
performance.
Schedules and tasks
Follow these instructions at the recommended intervals for proper maintenance.
Weekly Software cleanup Use Disk Cleanup or safe third-party cleaning tools to remove junk files and temporary
files that accumulate and slow down your system. Also, check for programs you no
longer need and uninstall them.
To run Disk Cleanup:
1. Type disk in the taskbar search box, and then select Free up disk space by
deleting unnecessary files or Uninstall apps to free up disk space.
2. Follow the on-screen instructions.
Defragmenting and
optimizing
Use Disk Defragmenter to defragment and optimize your hard drive to keep your hard
disk in good condition and improve system performance. Frequently performing this
task does not harm your system.
To run Disk Defragmenter:
1. Connect the computer to AC power.
2. Type defragment in the taskbar search box, and then select Defragment and
optimize your drives.
3. Follow the on-screen instructions.
Virus scan Perform a full virus scan every week to catch viruses that might have slipped through
unnoticed. Most antivirus products have a scheduling feature to keep track of this
automatically.
Monthly Hardware cleaning Thoroughly clean the outside of your computer.
Software updates Use Windows Update to fix operating system bugs and improve performance. Also, be
sure to check for driver updates for your hardware and new versions of your favorite
programs.
Windows Update Run Windows Update to install updates.
Yearly System Recovery In time, your system might still slow down, depending on the computer usage. Use
System Recovery to wipe your Windows operating system installation clean, restoring
it to the original configuration when you first started your system. Make a backup of
important data files before proceeding with a System Recovery. See Backing up,
restoring, and recovering on page 15 for further details.
As needed Backing up your data Use CD or DVD recording software that is installed on your computer to create (or
“burn”) backup discs of important information, including personal files, e-mail
messages, and Website bookmarks. You can also move data to an external hard drive.
Schedules and tasks 21
Cleaning your computer
Use the following products to safely clean your computer:
Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable
wipes, which come in a variety of brands)
Alcohol-free glass-cleaning fluid
Water with mild soap solution
Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)
Static-free cloth wipes
CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure
that a cleaning product is safe for your computer, check the product contents to make sure that ingredients
such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the
product.
Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning
agents can get trapped in the scratches.
Cleaning procedures
Follow the procedures in this section to safely clean your computer.
WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer
while it is turned on.
Turn off the computer.
Disconnect AC power.
Disconnect all powered external devices.
CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on
any computer surface. Liquids dripped on the surface can permanently damage internal components.
Cleaning the display
CAUTION: Do not spray or place the cleaner directly on the screen.
Gently wipe the sides and the surface of the display using a soft, lint-free cloth moistened with an alcohol-
free glass cleaner.
Cleaning the computer vents
Air vents keep the computer cool. Keep these vents clean by using a small, battery-powered vacuum cleaner.
(A battery-powered vacuum cleaner eliminates the risk of electric shock.)
1. Vacuum the vents on the computer case.
2. Remove any debris that has accumulated in and around the computer connectors (for example, the
Ethernet and USB connectors).
22 Chapter 7 Maintenance
Cleaning the keyboard or mouse
WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum
cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard
surface.
CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys.
To clean the keyboard or mouse, use a soft microfiber cloth or a chamois moistened with one of the
cleaning solutions listed previously or use an acceptable disposable wipe.
To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of
compressed air with a straw extension.
If you have a roller-ball mouse, clean the ball and rollers inside.
1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise to remove the ring and
release the roller ball.
2. Rinse the roller ball with soap and warm water.
3. Clean the rollers inside the mouse with a cotton swab dampened with isopropyl (rubbing) alcohol.
4. After the roller ball and rollers are completely dry, replace the ball and ball-cover ring.
Cleaning your computer 23
8 Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside
the operating system so that it can isolate hardware failures from issues that are caused by the operating
system or other software components.
NOTE: To start BIOS on a convertible computer, your computer must be in notebook mode and you must
use the keyboard attached to your tablet. The on-screen keyboard, which displays in tablet mode, cannot
access BIOS.
To start HP PC Hardware Diagnostics UEFI:
1. Start BIOS:
Computers or tablets with keyboards:
Turn on or restart the computer, quickly press esc.
Tablets without keyboards:
Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button.
2. Press or tap f2.
The BIOS searches three places for the diagnostic tools, in the following order:
a. Connected USB drive
NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading
HP PC Hardware Diagnostics (UEFI) to a USB device on page 24.
b. Hard drive
c. BIOS
3. When the diagnostic tool opens, select the type of diagnostic test you want to run, and then follow the
on-screen instructions. On a tablet, press the volume down button to stop a diagnostic test.
NOTE: If you need to stop a diagnostic test on computers or tablets with a keyboard, press esc.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
There are two options to download HP PC Hardware Diagnostics to a USB device:
Download the latest UEFI version:
1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.
2. In the HP PC Hardware Diagnostics section, click the Download link, and then select Run.
24 Chapter 8 Using HP PC Hardware Diagnostics (UEFI)
Download any version of UEFI for a specific product:
1. Go to http://www.hp.com/support, and then select your country. The HP Support page is displayed.
2. Click Drivers & Downloads.
3. In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.
4. Select your computer, and then select your operating system.
5. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version
you want.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 25
9 Specifications
Operating specifications
NOTE: To determine the exact electrical ratings of your computer, refer to the computer ratings label,
located on the outside of the computer.
Factor Metric U.S.
Operating temperature 5°C to 35°C 41°F to 95°F
Storage temperature -20°C to 60°C –22°F to 149°F
Operating humidity 15% to 80% @ 26°C 15% to 80% @ 78°F
Operating altitude 0 m to 2000 m 0 ft to 6561 ft
Storage altitude 0 m to 4572 m 0 ft to 15000 ft
26 Chapter 9 Specifications
10 Electrostatic Discharge
Electrostatic discharge is the release of static electricity when two objects come into contact—for example,
the shock you receive when you walk across the carpet and touch a metal door knob.
A discharge of static electricity from fingers or other electrostatic conductors may damage electronic
components.
To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:
If removal or installation instructions direct you to unplug the computer, first be sure that it is properly
grounded.
Keep components in their electrostatic-safe containers until you are ready to install them.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
Use nonmagnetic tools.
Before handling components, discharge static electricity by touching an unpainted metal surface.
If you remove a component, place it in an electrostatic-safe container.
27
11 Accessibility
HP designs, produces, and markets products and services that can be used by everyone, including people
with disabilities, either on a stand-alone basis or with appropriate assistive devices.
Supported assistive technologies
HP products support a wide variety of operating system assistive technologies and can be configured to work
with additional assistive technologies. Use the Search feature on your device to locate more information
about assistive features.
NOTE: For additional information about a particular assistive technology product, contact customer
support for that product.
Contacting support
We are constantly refining the accessibility of our products and services and welcome feedback from users. If
you have an issue with a product or would like to tell us about accessibility features that have helped you,
please contact us at +1 (888) 259-5707, Monday through Friday, 6 a.m. to 9 p.m. North American Mountain
Time. If you are deaf or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical
support or have accessibility questions by calling +1 (877) 656-7058, Monday through Friday, 6 a.m. to 9 p.m.
North American Mountain Time.
NOTE: Support is in English only.
28 Chapter 11 Accessibility
12 Support information
How to get help
HP support can help you get the most from your computer. You will find what you need with tools located on
your computer and with information available on the Web, by phone, or through your local retailer.
Before contacting HP support, it’s important to have the following information handy:
Model number
Product number
Serial number
Software build number
Operating system
Purchase date
Please take a moment to write down your product information for future reference.
The first four items on the list (model number, product number, serial number, and software build number)
can be viewed by using HP Support Information. Type support in the taskbar search box, and then select
HP Support Information.
Don’t forget to register at http://www.hp.com/apac/register.
Where to get help
Use the Get started app for help with hardware and software questions. Select the Start button, and
then select the Get started app.
Use HP Support Assistant. Type support in the taskbar search box, and then select the HP Support
Assistant app.
‒ or –
Click the question mark icon in the taskbar.
HP Support Assistant provides useful troubleshooting and diagnostics information and includes the
following:
Online chat with an HP technician
Support telephone numbers
HP service center locations
For help online, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.
Telephone assistance to get you up and running is covered for thirty (30) days from the time you purchase
your computer. After thirty (30) days, there may be a charge, but the helpful support is still available.
How to get help 29
Customer support for repairs
If your computer needs to be repaired, or to have parts replaced, you have two choices:
You can easily replace many of your computer parts that are considered consumer replaceable. This is
the fastest method of repair, because many times we can send the part directly to your home or
business in a few days. (This option may not be available in all countries or regions.)
If a repair is necessary, HP support will make arrangements to repair your computer.
These services are covered during the warranty period.
There are some limitations and exclusions to the warranty (as well as some important details), which are
described in the HP Worldwide Limited Warranty and Technical Support guide.
Before upgrading your hardware
If you intend to upgrade any of your hardware, do it only after you set up your new computer. For
instructions on setting up your computer, see the Setup Instructions or Quick Setup poster or Setting up your
computer on page 3. If you have any problems setting up your system and turning it on, immediately contact
HP support using the procedures given earlier in this chapter. This must be done first before attempting to
upgrade your system.
By breaking the security seal on the back of the computer, you confirm that the computer was working
properly before you attempted to upgrade your system. After the security seal has been broken, your
computer is then, to the extent allowed by local law, covered under the terms and conditions listed in the HP
Worldwide Limited Warranty and Technical Support guide.
30 Chapter 12 Support information
Index
A
accessibility 28
action keys 5
B
backups 15
boot order
changing 19
C
caring for your computer 22
cleaning your computer 22
computer
security features 8
troubleshooting 9
E
electrostatic discharge 27
F
fn key 5
H
help and support 1, 29
hot keys 5
HP PC Hardware Diagnostics (UEFI)
using 24
HP Recovery Manager
correcting boot problems 19
starting 18
HP Recovery media
creating 15
recovery 18
HP Recovery partition
recovery 18
removing 20
I
internet, connecting 4
M
maintenance, schedules and tasks
21
minimized image recovery 18
minimized image, creating 17
O
operating specifications 26
original system recovery 17
R
recover
options 17
recovery
discs 16, 18
HP Recovery Manager 17
media 18
starting 18
supported discs 16
system 17
USB flash drive 18
using HP Recovery media 16
recovery media
creating 15
creating using HP Recovery
Manager 16
recovery partition
removing 20
S
security features 8
support 29
supported discs, recovery 16
system recovery 17
system restore point
creating 16
system restore point, creating 15
T
troubleshooting
computer does not start 9
display (monitor) 10
Internet access 12
keyboard and mouse (wireless)
11
keyboard and mouse (with
cable) 11
power 10
software 13
speakers and sound 11
W
Windows
system restore point 15, 16
Windows tools
using 16
Index 31

Navigation menu