Redline Communications RDL3000RMF White Space Device with Geo-location - Fixed User Manual 70 00184 02 00
Redline Communications Inc. White Space Device with Geo-location - Fixed 70 00184 02 00
Contents
User Manual
RDL-3000 M2M Solutions RDL-3000 Family Broadband Wireless Systems RDL-3000-RMF Fixed TVBD Radio Module Product Manual Product Overview ................................................................... 4 Conditions of Use ................................................................... 5 Module Installation and Service ............................................ 6 Final Product Requirements .................................................. 7 Regulatory Notices ................................................................. 8 70-00184-02-00 Proprietary Redline Communications © 2013 Page 1 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Copyright Information All rights reserved February 20, 2013. The information in this document is proprietary to Redline Communications Inc. This document may not in whole or in part be copied, reproduced, or reduced to any medium without prior consent in writing from Redline Communications Incorporated. Contact Information Contact Information: Redline Communications Inc. 302 Town Centre Blvd. Markham, ON Canada L3R 0E8 Web site: http://www.rdlcom.com Email: Inquiries: info@rdlcom.com Support: support@rdlcom.com Training: training@rdlcom.com Document Control: 70-00184-02-00-RDL-3000-RMF_Product_Manual-20130220b.doc Disclaimer The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Additionally, Redline makes no representations or warranties, either expressed or implied, regarding the contents of this product. Redline Communications shall not be liable for any misuse regarding this product. The information in this document is subject to change without notice. No part of this document shall be deemed to be part of any warranty or contract unless specifically referenced to be part of such warranty or contract within this document. 70-00184-02-00 Proprietary Redline Communications © 2013 Page 2 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL TABLE OF CONTENTS Product Overview ................................................................... 4 Conditions of Use ................................................................... 5 2.1 General Conditions ............................................................................................ 5 2.2 Country of Use ................................................................................................... 5 2.3 Product Labeling................................................................................................ 5 Module Installation and Service ............................................ 6 3.1 Installation Into a Final Product ........................................................................ 6 3.2 Module Servicing ............................................................................................... 6 3.3 Professional Installation .................................................................................... 6 3.4 Safety Precautions............................................................................................. 6 3.5 Radio Frequency Safety .................................................................................... 6 Final Product Requirements .................................................. 7 4.1 Frequency Bands ............................................................................................... 7 4.2 Antenna Use and Transmit Power .................................................................... 7 4.3 Certified Antennas ............................................................................................. 7 Regulatory Notices ................................................................. 8 FCC Notices: Deployment in USA .................................................................. 8 LIST OF TABLES Table 1: Transmit Power ................................................................................................. 7 Table 2: Approved Antennas ........................................................................................... 7 70-00184-02-00 Proprietary Redline Communications © 2013 Page 3 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Product Overview The RDL-3000 Radio Module RDL-3000-RMF Fixed TVBD is comprised of a proprietary Media Access Control (MAC) protocol engine and Time Division Duplexing (TDD)/ Orthogonal Frequency Division Duplexing (OFDM) digital radio. The RDL-3000-RMF module is not designed for stand-alone operation. The module is sold as one component of a packaged system which includes a suitable housing for the module connectors for required external components including a power supply and antenna system. This is afterwards referred to as the 'final product'. The final product may be designed and manufactured by Redline or a licensed third party. Frequency settings within the specified frequency ranges are software keyed to be compliant with specific regulatory agency requirements in the region of deployment. RDL-3000-RMF: 473 - 695 MHz Important: Read this entire document prior to installing or operating the RDL-3000-RMF module. 70-00184-02-00 Proprietary Redline Communications © 2013 Page 4 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Conditions of Use 2.1 General Conditions The RDL-3000-RMF is not provided for sale to the general public. The RDL-3000-RMF contains a proprietary radio interface and can not be directly connected to any standard telecommunications or computer devices. This manual is provided as supplement to technical and operational documentation and training provided by Redline and its agents. Any operation or use of the RDL-3000-RMF in any manner not expressly specified within this manual or approved in writing by Redline (or its agents) is expressly forbidden and voids the users right to operate the module. This includes, but is not limited to, any modification of the module hardware or software, installation of the module in a non approved enclosure, and use with non approved antennas. 2.2 Country of Use Refer to the regulatory notices in this document before installing or operating the module. The RDL-3000-RMF is certified with limiter modular approval for use as an 'intentional radiator' in the United States as device FCC ID: QC8-RDL3000RMF. 2.3 Product Labeling Information labels are applied to the final product. The final product features a label on the outside surface listing the registration number for the enclosed RDL-3000-RMF module. Contains FCC ID:QC8-RDL3000RMF Do not to remove any labels from the module or the final product. 70-00184-02-00 Proprietary Redline Communications © 2013 Page 5 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Module Installation and Service 3.1 Installation Into a Final Product The RDL-3000-RMF must only be installed by trained professional technicians authorized by Redline or its agents. The module must be installed only into an approved enclosure (see Conditions of Use) and only at an approved manufacturing facility or service depot. 3.2 Module Servicing The RDL-3000-RMF is not intended to be field serviceable, and contains no field serviceable or field replaceable parts. The module must be serviced only at an approved manufacturing facility or service depot. Warning: The RDL-3000-RMF are susceptible to damage from electrostatic charge. Electrostatic Discharge (ESD) must be avoided to prevent damaging or destroying the module. The module must always be store in an anti-static container/bag prior to installation and following removal from the product for servicing. Observe ESD precautions when handling the module. 3.3 Professional Installation Devices containing the Redline RDL-3000-RMF require professional installation. It is the responsibility of the installer to understand the product operation by attending training as required, reading and understanding the product documentation, and ensuring that all building, safety and regulatory codes are met and the installation is complete and secure. 3.4 Safety Precautions Installation and service must be done by personnel having technical training and experience necessary to be aware of hazards during installation and/or service of RF equipment. The installation and/or service must be done using procedures designed to minimize any danger to technical personnel or any other person. 3.5 Radio Frequency Safety The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of the general population limits as defined by FCC CFR 47, Part 2.1091, Radio frequency radiation exposure evaluation for fixed devices & Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php . Refer to the regulator statements included in this document. 70-00184-02-00 Proprietary Redline Communications © 2013 Page 6 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Final Product Requirements The following requirements apply to all final products incorporating the RDL-3000-RMF. 4.1 Frequency Bands Operation of the final product requires a software 'key' that is available exclusively from Redline. This key restricts device operation to the FCC 473 - 695 MHz band on TV channels 14 - 35 and 39 - 51. The professional installer and operator can not modify or otherwise circumvent these operational restrictions. To operate in the TV Whitespaces frequency range, each RDL-3000-RMF must contact and register with the WSDB database server (server URL is programmed into the RDL3000-RMF). The RDL-3000 may only transmit on channels indicated as 'available' by the WSDB database. Channel assignments are temporary and the RDL-3000-RMF must periodically contact the WSDB to refresh the channel list. The RDL-3000-RMF vacates a channel in-use immediately when a WSDB database status update indicates the channel is no longer available or the expiry time for an obtained list has elapsed. The RDL-3000-RMF operating as a PMP Sector Controller/PTP Master (PMP-SC) is not allowed to transmit on any channel before registering with the WSDB database and obtaining a list of available channels for its location. The RDL-3000-RMF operating as a PMP Subscriber/PTP Slave (PMP-SS) is allowed to transmit on the channel currently being used by the PMP-SC initially only for the purpose of registering with the WSDB database and obtaining a list of available channels for its location. If the channel in-use is not available, the PMP-SS notifies the PMP-SC and stops transmitting. The PMP-SS may register and obtain the current channel list once per hour. 4.2 Antenna Use and Transmit Power The RDL-3000-RMF module supports operation with 2x2 MIMO antenna systems with two transmit chains and two receive chains. The RDL-3000-RMF module must be used only with certified antennas and using the channel size and output power level specified by the FCC regulations. Table 1: Transmit Power Channel # Tx Power (dBm) 14-34 40-51 35, 39 4.3 +18 +16 Certified Antennas This device has been designed to operate with the antennas listed in the following table. Any additional antennas will be used only after authorization is obtained through Class II permissive change. Table 2: Approved Antennas Supplier Part # Gain Frequency Range (MHz) Application Size Beamwidth / Polarity Redline AFS-VH60060-01 13 dBi 470-698 Sector 122 cm (48 in) 60 deg vpol & hpol Redline AFS-SB60055-01 11 dBi 470-698 Log-P Directional 122 cm (48 in) 55 deg vpol & hpol 70-00184-02-00 Proprietary Redline Communications © 2013 Page 7 of 10 February 20, 2013 RDL-3000 FAMILY RDL-3000-RMF PRODUCT MANUAL Regulatory Notices FCC Notices: Deployment in USA The following notices about deployment in the USA are included in training and documentation provided to professional installers and operators of the final product: 1. The final product must be professionally installed. 2. WARNING -- FCC RF Exposure Warnings To satisfy FCC RF exposure requirements for RF transmitting devices, a minimum distance of 40 cm (15 3/4") should be maintained between the antenna of this device and persons during device operation: To ensure compliance, operation at closer than these distances is not recommended. The antenna used for this transmitter must not be collocated in conjunction with any other antenna or transmitter. 3. FCC Information to Users @ FCC 15.706: This equipment has been tested and found to comply with the rules for TV bands devices, pursuant to part 15 of the FCC rules. These rules are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the manufacturer, dealer or an experienced radio/TV technician for help. 4. FCC Information to Users @ FCC 15.19: Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 5. FCC Information to Users @ FCC 15.21: Warning: Changes or modifications not expressly approved by Communications could void the user’s authority to operate the equipment. 70-00184-02-00 Proprietary Redline Communications © 2013 Page 8 of 10 Redline February 20, 2013 RDL-3000 FAMILY 70-00184-02-00 RDL-3000-RMF PRODUCT MANUAL Proprietary Redline Communications © 2013 Page 9 of 10 February 20, 2013 RDL-3000 M2M Solutions 302 Town Centre Markham, Ontario Canada L3R 0E8 www.rdlcom.com 70-00184-02-00 Proprietary Redline Communications © 2013 Page 10 of 10 February 20, 2013
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 10 Language : en-US Tagged PDF : Yes Title : 70-00184-02-00 Author : Technical Writer, PLM Subject : February 20, 2013 Creator : Microsoft® Office Word 2007 Create Date : 2013:02:20 12:14:59-05:00 Modify Date : 2013:02:20 12:14:59-05:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools