Ringway Tech A-20 DIGITAL PIANO User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2435823
Application ID	+lWqC462iy+Mm49M8NOyOA==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	378.83kB (4735324 bits)
Date Submitted	2014-11-04 00:00:00
Date Available	2014-11-05 00:00:00
Creation Date	2014-09-29 18:48:07
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-09-29 18:48:25
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	脫锚脕脰脛戮路莽

Owner's Manual
Virgin Musical Instruments
D tal P
Precaution
manual carefully and keep it for future reference.
Thank you for purchasing this digital instrument.For perfect operation and securityplease read the
Safety Precautions
CAUTION
m or ELEEYNC max
on m cm
_ .j
The lightning flash with arrowhead symbol Within an equilateral triangle is in
Tended to alert the user to the presence of uninsulated “dangerous voltage”
within the product ’5 enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance(servicing) instructions in
the literature accompanying the product.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions. -
5) Do not use this apparatus near water. (Figure 1)
6) Clean only with dry cloth.
7) Do not block any ventilation
openings,install in accordance with the
manufacturer 5 instructions.
8) Do not install near any heat sources such
as radiators. heat registers.stoves.or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plugA polarized
plug hase two blades
with one wider than the otherA grounding
type plug has two blades and a third
grounding prong.The Wide blade
or the third prong are provided for your
safety.if the provided plug does not fit into
your outlet.consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked
on or pinched particularly at plugs.convenience
receptaclesand the point where they exit from
the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only With the cart,stand.tripod.bracket,or
table specified by the manufacturemr sold with
the apparatus.When a cart is used,use caution
when moving the cart/apparatus combination to
avoid iniury from tip-over (Figure 1).
13) Unplug this apparatus during lightning storms
or when unused for a long periods fo time.
14) Refer all servicing to qualified service
personnel.Servicing is required when the
apparatus has been damaged in any way.such as
power-supply cord or plug is damaged.liquid has
been spilled or obyects have fallen into the
apparatusthe apparatus has been exposed to rain
or moisture,does not operate normally,or has been
dropped.
WARNING:To reduce the risk of fire or
electric shock,do not expose this
apparatus to rain or moisture.
CAUTION:Apparatus shall not be
exposed to dripping or splashing and no
objects filled with
|iquids.such as vases,shall be placed on
the apparatus.
Thank you for choosing the A-20 Digital Piano
Your A-20 is a high quality digital piano featuring an 88 note
hammer action, touch sensitive keyboard and the most advanced
PCM tone generation technology that combined will provide you with
a rich performing and playing experience. You can also record your
own performances or record your own accompaniment to play along
to. The A-20 is more than great technology, your digital piano is
also a stylish piece of furniture that will look great anywhere in your
home. To get the most out of your instrument, please read this manual
thoroughly and try out the various functions as we take you through
them. We hope your new instrument will continue to entertain you for
many years to come.
PANEL CONTROL
CONNECTOR PANEL ~
I. Speaker Connection ~-
2. USB Midi/USE Audio
3. Midi In/Midi Out
4. Line In/Line Out
. DC I2V Input ------
. Phones I/Phones 2 .
7. Pedal ------
8, Bluetooth
PANEL CONTROLS -
I, PoWar/Standby ----
2. Adjust The Volume
3. Adjust The Sound
4_ Demo Play
. [SETUP] Button -
. LCD Display ..
7, [+ /YES] & [— / NO]
VOICE & FUNCTION -
|.Voice
2. Layer Mode "
3. Split Mode
4, Duet
5, Reverb '-
6. Effects ‘-
7. Metronome
3' Tempo ..
SETUP ... ... ... ... ... ...
I. Reverb Type
2. Effects Type '
3. Reverb Level
4. Effects Level
5. Metro Type ----
6. Metro Volume "
7. Main Volume
8. Split Volume "
9. Layer Volume - "
IO. USB Disk Song's Volume -
ll. USB Speed
IZ. Mutetrack ~~~~~
"-I6
"l6
I6
"l7
l7
"I7
l3. Split Point - I7
I4. Touchm " IS
IS. Transpose-m-"m-U I8
I6, Master Tunemm‘ I8
l7. Loadmemm-"m- "-l9
I8. Savemem"---"-”"-" "‘I9
l9. Grading '20
20. Local -2|
2|. Bluetooth ~ ~2|
22 Reset -'-2|
REGISTRATION MEMORY ~~~~~~ 22
I Save” .. ...... ...22
2, Load- 22
3. Saving The Registration Data To
USB Diskm ~22
4. Use Registration Data from USB‘ '22
5- Delete REG File from USB------------23
SONG RECORDING". - ---24
I. Quick Recording--- - ...24
2- MUItI Track Recording-h ...25
3, Melody Track Recording-u 27
---2s
28
4. Delete Song"
5. File Button"
6. Mutetrack" ~28
7. Adjusting Song's Volume 28
PLAY ALONG SONG ... ... ... ... ... ... 29
|.Se|ectingASong "-29
2. Listening To The Entire Song "-29
3 Practicing The Right Hand Of The
Selected Song ""30
4. Practicing The Left Hand Of The
Selected Song - W-"30
5. Practicing Both Hands Of The
Selected Song ‘ '
MIDI FUNCTION
---3o
---32
~32
Local On/Off
APPENDIX ------ -- 33
|. Voice List ---------------------- "'33
~34
-35
...36
2. MIDI Implementation Chart ~
3. Factory Resetm
4. Specificationsm'
PANEL CONTROL
w—ui,
w—jl}
‘fiufi
will
\—i1]7
ncnv
LINEIN LIquur 0+-
\—IJ,
‘—7I1
x—l]
w—l}
\—,I]7
‘—.1,,,,,
\—’l1*
\il}
um: um
/ \
\ A/
\—Ij
‘—u
/‘\
\A/
I \—l]
: x—iu
x—lj
usamHosY mmm
Top Panel
Bottom Panel
w—l}
, \gl]
, ‘—i-1
SPEAKER
CONNEDYION
w—i'lli
\ilj
w—ilxi
x—il}
\—;I]
‘—I1
w—ll
\!I\
\—,I17
\—lj
\ilj
‘—l]
PEDAL
CONNECTOR PANEL
The connector jacks are located on the bottom panel of the piano.
BFEAKER ocizv
cowscriou usl to Hon MIDI m MIDIOUY LINEN was our .—>—-
h iiO K.) OOC
I. Speaker Connection
Connection for the Speaker cable with square interface on the bottom panel of
the piano.
2. USB Midi/USB Audio
USB MIDI: This product allows the transfer of MIDI information over USB to a
computer. As complicated this might sound, it's actually pretty straight forward.
Because your PIP-28 is USB Class Compliant, there is no need to install a driver to
enable it to work with computer running OSX, Windows XP. Vista or Windows 7.
Simplyjust plug it in and the 08 will do the rest. The RP-28 will work with all stan»
dard MIDI based computer software.
USB Audio interface is a digital audio interface. By USB cable, you can digitally
transfer intact audio signals of PC to this instrument, and enjoy it on this
instrument or use it for accompanywhen you play this instrument; likewise, you
can transfer intact audio Signals of the instrument to PC to record and edit music.
The Piano provides MIDI IN and MIDI OUT ports. MIDI jacks allow communication
with other products equipped with MIDI interfaces.
The audio output from other sound system connected to the LINE IN jack on the
bottom panel can be mixed with the sound of the unit. This function is convenient
when you want to play along with a favourite song. The Line out jack can be used to
deliver the output of the piano to a keyboard amplifier. stereo sound system. mixing
console or tape recorder.
5. DC I2V Input
Connection for the included DC power adapter.Please use only the provided
adapter.
6.Phones I/Phones 2
Two sets of standard stereo headphones can be plugged in here for private practice or
late-night playing. The internal speaker system is automatically shut off when a pair of
headphones is plugged into PHONES jacks.
Q i ll
PHONES i
7. Pedal
Connect the plug of the foot pedal unit to the pedal jack on the bottom panel.
Damper Pedal (Right): It performs the same function as the damper pedal on an actual
acoustic piano. letting you sustain the sound of the voices even after releasing your
fingers from the keys.
Sostenuto Pedal (Center): If you play a note or chord on the keyboard and press the
sostenuto pedal while the notes are held, those notes will be sustained as long as the
pedal is held. but all subsequently played notes will not be sustained.
Soft Pedal (Left): The Soft Pedal controls the sound volume. Press the pedal to
decrease the output sound volume.
8. Bluetooth
. . - . Bluetooth
This piano can support Bluetooth With the Connection of the (3
Bluetooth jack. Reference: Bluetooth.
PANEL CONTROLS
6‘0
1010
goao
eézo
I. Power/Standby
Turn the power on by pressing the [POWER/STANDBY] switch, the panel LCD display
Will light.
% EEFIFIHD PIHNEI
Auto Standby
This product will switch off automatically in 30 minutes after no any operation on it.
In this case, press the [POWER/STANDBY] button to off mode, and press the
[POWER/STANDBY] button again to turn the power switch on.
Deactivate the Auto Standby function
Hold the first white key and first black key on the left side of the keyboard at the same
time and then turn on the unit to deactivate the Auto Standby function.
2. Adjust The Volume
Use [VOLUME] control to adjust the volume to your desired level.
3. Adjust The Sound
Use [TONE] control to adjust the volume to your desired level.
4. Demo Play
There are 16 demo songs pre-recorded in the piano.
A demo song may be selected for playing by either of two methods:
a.Use [+/YES] / [-/NO]Buttons: Press [DEMO] button, Use [+/YES] / [-/NO]
buttons to select the song you want to play. The [DEMO] and voice buttons will
flash .
' lFlNEI
% % El: Eli slum:
b.Voice Select Button: Press the [DEMO] button.then press the desired Voice Select
button. The [DEMO] and voice buttons will flash .
NOTE
The Main voice will sychronous change when demo changes.
Press [DEMO] button again to stop playing.
5. LCD Display
The LCD will display the appropriate status, function,value. voice or the current mode
of operation.
6. [SETUP] Button
The [SETUP] button transfers the piano to Edit mode, enabling the modification of the
parameters of many features such as touch sensitivity, splits, layers and MIDI control,
among others.
7. [+ /YES] & [- / NO]
Parameter adjusting button.
VOICE & FUNCTION
SelectingAVoice
Your instrument has i4 builtrin voices. which include several pianos as well as
other instruments. These digitally-sampled musical instrument sounds may be
selected one at a time. O O
mm mo mm mummm
GOO
nwmum gm; WWW WWW
mm can ”(influx m
To select a voice. press the appropriate Voice Select button on the right side of the
front panel.
NOTE
When [VARIATION/USER] button is unlighted. you can press the
appropriate button to select the voice in the first line.
When [VARIATION/USER] button is lighted, you can press the appropria e
button to select the v0ice in the second line.
Setting A Voice
Your instrument has 128(01 -‘|28) GM standard voices. Press [VARIATION/USER]
button 2 seconds, the user indicator is flashing.
ln USER voice Mode, Hold down the appropriate voice select button for 2
seconds, then the [VARIATION/USER] and voice button is flashing, use
[+ / YES] / l- / NO] buttons to set the voice you want to set into the direct
user voice .
vim: macaw
erv [HUKO10NCAh
mm “viz.
Save User Voice
In user mode. press the appropriate voice select button again to save user voice.
Press [VARIATION/USER] button again to exit.
2. Layer Mode
In Layer mode two voices may be played simultaneously. each at selected volumes. To
enter Layer mode by either of two methods: a. press [LAYER] button and the indicator
is flashing, then press the voice button to select the second voice.
0 O
Emmi] [EMS [SEEK‘SZWN
OOO
«Rsitiiunu mm: JPRifiWEASS VniAYiDN
mm min nmmm w
b. In Layer mode. hold down [LAYER] button and the indicator is flashing. then use
[+ / YES] / [. / NO] buttons to select the second voice.
When [LAYER] button is lit, press the voice button to select the MAIN sound.
0 O
mmzwn mm MKKDRCAN
mama mm (Kuwait/m
maximum aim: minus/m WIN/YEN
deii mums: w
To adjust the volume of the Main voice and layer voice.please refer to [SETUP]
function, see page 16.
Press [LAYER] button again to exit.
3. Split Mode
Split Mode allows the keyboard to be divided into two sections so that different voices
may be played with the left and right hands.
The volume may be independently adjusted for eachvoice, the Split Point (the highest
note played with the left hand) may be adjusted and the Split Voice may be changed
as desired.
Enter Split Mode
Press the [SPLIT] button. The indicator is flashing. The Split (left hand)
voice will be Bass and the Split Point will be G2.
spur
Change the Split (left hand) voice
Change the Split (left hand) voice by either of two methods:
a. Press [SPLIT] button, the Split indicator IS flashing. then press the voice select
button to select the left hand voice.
0 O
cmnwmo EPIANU KazKoKoAN
smaHmANo Emma (HUKHORGAN
GOO
HARPSICHORD srmNss upmawms VARIATION
Namm (HOIR [Lttrmsnss um:
b. In Split Mode. hold down [SPLIT] button and the indicator is flashing. then use
[+ / YES] / [- / NO] buttons to select the left hand voice.
Change the Main (right hand) voice
When the Split indicator is lighted,then press the voice select button to select
the Main voice.
GRAND PIANO a puma
BRIGHI PIANO k mm
RotK owe/w
(HURCH omN
HARPSICHORD STRINGS UPRIK-HTBASS VARIATION
Neuim (How FIFCYRICRASS um;
Change the Split Point
Press the [SPLIT] button, the indicator will momentarily display off, then hold down
the [SPLIT] button and press the appropriate piano key or use [+ /YES] / [- / NO]
buttons to change the Split Point.
Or press [SETUP] button to change it. see page 17.
Setting the Split Voice Volume
Please refer to [SETUP] function. see page 16.
Exit the Split Mode
Press [SPLIT] again. the Split indicator turns off and the Split mode is no longer active.
4. Duet
Press the [DUET] button to select DUET mode. In this mode, the keyboard will be
separated into two playing areas.
Right: from C#3 to C7
Left: from A-‘l to CS
DUET
This will be very helpful when the instrument is used by two players at the same time
and they will be able to play the same piano sound in the same octave.
Press [DUET] button again to exit the DUET mode.
The [REVERB] button selects a number of digital reverb effects that you can use for
extra depth and expressive power. Press [REVERB] button to turn off or turn on the
reverb effect. When REVERB is turned on, press [REVERB] button 2 seconds, use
[+ / YES] / [- / NO] button to select reverb level.
nrvrn
Or press [SETUP] button to select reverb type and level. Please see pages 13 and 14.
Shimmering. broadening effect. Press [EFFECTS] button to turn off or turn on the
CHORUS effect.
When EFFECTS is turned on. press [EFFECTS] button 2 seconds. use[+ / YES] /
[, / NO] button to select CHORUS level.
EFFK
Or press [SETUP] button to select chorus type and level. Please see pages 13 and
14.
Metronome is a convenient feature for practice, and it can also provide a solid
rhythmic guide when recording.
Press [METRONOME] button can turn off or turn on the Metronome effect. When
Metronome is turned on.press [METRONOME] button 2 seconds, use [+ / YES] /
[- / NO]button to select Metronome volume (00—127) .
MiYkoNa
Or press [SETUP] button to select Metronome type and volume. Please see
page 15.
8. Tempo
This function allows you to set the tempo by [TEMPO] button.
Press [TEMPO] button to turn off or turn on the TEMPO effect.
Press [TEMPO] button. the indicator is lit. use [+ /YES] / [- / NO]button to
change the tempo value range from 20 to 280 BPM (beats per minute).
1mm
SETUP
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select the function . Press [+/YES] button into the option, use [+/YES] /
[-/NO] to set the parameter.
The option and the parameters are as the follows:
I . Reverb Type
Press [SETUP] button to enter the function menu. Use [SETUP] button or [»/NO]
button to select [R.TYPE?]. Press [+/YES] into the option,the LCD will display:
R.TYPE: HALL2
saw
Then use [+/YES] / [-/NO] to set the parameter (Default: HALL2).
The LCD will indicate these parameters as shown below:
R.TYPE: ROOM]
R.TYPE: ROOM2
R.TYPE: ROOM3
R.TYPE: STAGEI
R.TYPE: STAGEZ
R.TYPE: PLATE
R.TYPE: HALLl
R.TYPE: HALL2
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
2. Effects Type
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [C.TYPE?]. Press [+/YES] into the option,the LCD will display:
C.TYPE: CHORUSS
% EiFIFIND F-‘IFIHEI
C: TVF‘EI: IZHURUEEB
Then use [+/YES] / [-/NO] to set the parameter (Default: CHORUSS).
The LCD will indicate these parameters as shown below:
CTYPE: CHORUSI
CTYPE: CHORUSZ
C.TYPE: CHORUS3
C.TYPE: CHORUS4
C.TYPE: FEEDBACK
C.TYPE: FLANGER
C.TYPE: SHTDELAY
C.TYPE: SHRTDLFB
Press [+/YES] & [-/NO buttons simultaneously to restore the default value.
3. Reverb Level
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [R.LEVEL?]. Press [+/YES] into the option.the LCD will display:
R.LEVEL: 50.
Then use [+/YES 7>,
(Default: 50).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
4. Effects Level
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [C.LEVEL?]. Press [+/YES] button into the option. the LCD will
Display: CLEVEL: 50
EERHHD F'IF! i
[3. LEUEEL:
mp
Then use [+/YES] / [-/NO] button to adjust the CHORUS level. Range: 00-127
(Default: 50).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
5. Metro Type
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [METROTYPE7]. Press [+/YES] button into the option, the LCD
will display: METROTYPE: 4/4.
H r\. n ' — qr]
sUuP l"lE. I r:LJ I ‘rr’lzi 4J4
Then use [+/YES] / [-/NO] button to set the parameter: 2/2\ 2/4 t 3/4 : 4/4 4
5/4» 6/8 x 7/84 9/8 ‘ 12/8 (Default: 4/4).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
6. Metro Volume
Press [SETUP] button to enter the function menu.Use [SETUP] button or [-/NO]
button to select [METROVOL'Z]. Press [+/YES] button into the option.the LCD will
display: METROVOL: 100.
GRHND PIHND
% HE .IIIUUL: ma
Then use [+/YES] / [:/NO]button to adjust the METROVOL Range: 007127
(Default: 100).
Press [+/YES] 8. [-/NO] buttons simultaneously to restore the default value.
7. Main Volume
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [MAINVOL7]. Press [+/YES] button into the option, the LCD will
display: MAINVOL: 127.
ssrup
Then use [+/YES] / [i/NO] buttons to adjust the MAINVOL Range: 007127
(Default: 127).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
8. Split Volume
Press [SETUP] button to enter the function menu.Use [SETUP] button or [»/NO]
button to select [SPLITVOL'Z]. Press [+/YES] button into the option, the LCD will
display: SPLITVOL: 127.
mu»
Then use [+/YES] / [i/NO] buttons to adjust the SPLITVOL Range: 007127
(Default: 127).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
9. Layer Volume
Press [SETUP] button to enter the function menu.Use [SETUP] button or [-/NO]
button to select [LAYERVOL?]. Press [+/YES ] button into the option, the LCD will
display: LAYERVOL: 75.
mm:
Then use [+/YES] / [-/NO] button to adjust the LAYERVOL Range: 00-127
(Default: 75).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
CI)
IO. USB Disk Song‘s Volume
Press [SETUP] button. use [-/NO] or [SETUP] button to select “USBDISKVOL?”
Then use [+/YES] button to adjust the USB Disk Song's Volume. Range: 00-127,
Default: 127.
SETUP
I I. USE Speed
Press [SETUP] button, use [-/NO] or [SETUP] button to select “USBSPEED?” .
Then use [+/YES] button to adjust the USB Speed. Range: 50-200, Default: 100.
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [MUTETRACK?]. Press [+/YES] button into the option, the LCD will
display: MUTETRACKOl ?
mu»
Then press [SETUP] button to adjust MUTETRACK(Range:01?~16?), press [+/YES]
button into the option, use [+/YES] /[-/NO] button to select on or off.
I3. Split Point
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [SPLITPOINT?]. Press [+/YES] button into the option, the LCD will
display: SPLITPOINT: 35
snup
Then use [+/YES]/[—/NO] button to adjust the SPLITPOINT Range: 01 -88 .
CB
l4. Touch
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-[NO]
button to select [TOUCH7]. Press [+/YES] button into the option, the LCD will display:
TOUCH: NORMAL.
snuv
Then use [+/YES] / -/NO] button to set the parameter as shown below:
HARD
NORMAL
SOFT
FIX?
If you choose TOUCH: FIX?, Press [SETUP] button to enter the option. then use
[+/YES] / [-/NO] button to set the parameter: 00—427 (Default: 100).
I 5. Transpose
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [TRANSPOSE7]. Press [+/YES] button into the option. the LCD will
display: TRANSPOSE: »o-.
F" 'I' H N !'|
sf“)?
Then use [+/YES] / [-/NO] button to adjust the TRANSPOSE Range: -12 ~ +12
(Default: 0).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
I 6. Master Tune
Press [SETUP] button to enter the function menu. Use [SETUP] button and [-/NO]
button to select [MASTERTUNE7]. Press [+/YES] button into the option, the LCD
will display: MASTERTUNE: -0—.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2014:09:29 18:48:25+08:00
Create Date                     : 2014:09:29 18:48:07+08:00
Metadata Date                   : 2014:09:29 18:48:25+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : A-20脫垄脦脛脣碌脙梅脢茅拢篓脨脗赂帽脢陆拢漏.cdr
Creator                         : 脫锚脕脰脛戮路莽
Document ID                     : uuid:9c4db842-5d46-43eb-9230-b79cd7409fe8
Instance ID                     : uuid:79be8f0c-5c16-49db-a53f-db68ab552077
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 21
Author                          : 脫锚脕脰脛戮路莽

EXIF Metadata provided by EXIF.tools