Robert Bosch MRR1REAR Motion Detector User Manual

Robert Bosch GmbH Motion Detector fahren

a href="https://usermanual.wiki/Robert-Bosch" itemprop="url"> Robert Bosch >

User Manual

Driving70If all speed markers flash twice, there are already 6 desired speeds memo-rised. Delete at least one of them.<Deleting a desired speed Select the desired speed 5 which you wish to delete. Press button 4 for approx. 3 seconds. The desired speed is deleted. Active Cruise Control* The principleActive Cruise Control enables you to select a speed which the car will then maintain automatically, assuming your progress is not obstructed.Subject to reasonable limits, the system automatically adjusts the speed of your car if you come up behind a slower vehicle in front. You can adjust the distance which the system maintains between your own car and the vehicle in front in four stages. For safety reasons, this distance depends on the speeds in question. To maintain sufficient distance, the system automati-cally closes down the throttle, applies the brakes if necessary, and speeds up again if the vehicle in front accelerates. As soon as the road ahead becomes clear, it acceler-ates to your desired speed again. Active Cruise Control is no substitute for the driver's individual responsi-bility to keep a safe distance from other vehicles. You should decide on the basis of the road, traffic and visibility conditions whether and how to use the system. Only use the system in traffic that is flowing at a steady speed; do not use it on roads with tight bends, on slippery surfaces, in heavy rain or in fog. Check your road speed and stopping distance, to avoid committing a traffic offence or running the risk of causing an accident.<Displays in the info display 1Display for memorised desired speed 2Display for vehicle detected. Lights up when there is a vehicle in front 3Selected distance from vehicle in front 4Digital speed display. Is displayed briefly if you select your desired speed, see page 72. 1, 2 and 3 are displayed when the system is activated.<The system is activated. The display appears as soon as the system is activated and no preceding vehicle is detected. Vehicle detected. The display lights up when there is a vehicle in front. The system instructs you to intervene by braking and, if necessary, taking evasive action. The display flashes. Active Cruise Control is unable to restore the distance between your car and the vehicle in front automatically. For further details, see page 74.
OverviewControlsDriving hintsCommunication NavigationEntertainmentMobilityReference 71Automatic intervention of ABS or DSC, or you apply the parking brake while on the move. Active Cruise Control will only intervene by applying the brakes. For further details, see page 74. Operating Active Cruise Control1Activating the system: Memorising and increasing the desired speed 2Activating the system: Memorising and reducing the desired speed 3Interrupting the system 4With the system interrupted: Briefly press the button to call up the memorised speed 4With the system activated: Increase the desired speed by 1 mph each time the button is pressed 5Selected distance from vehicle in front. You can choose between four distance levels. For further details, see page 72.Adjust your desired speed in line with the traffic conditions, and always remain ready to apply the brakes. The system is unable to compensate for high differences in speed between your car and a preceding vehicle, e.g. if you approach a heavy goods vehicle at high speed or if another vehicle turns out into your lane.< Activating the system You can activate the system from a speed of 20 mph. Press the lever forward or pull it back. You can now use the system. The current speed is simultaneously memorised as the desired speed and briefly displayed in the speedometer, see arrow. The ideal operating conditions are main roads, dual carriageways and motorways where you are able to drive at speeds of between approx. 50 and 90 mph. Always observe the speed limit for the road on which you are driving.If the system cannot be activated, the display ACC --- mph appears briefly in the speedometer. The system may have been interrupted automatically, see Inter-rupting the system, or there may be a malfunction. Calling up Check Control messages, see page 79.<
Download:
Mirror Download [FCC.gov]
Document ID2201306
Application IDSo3yGL7oRoSXY+8BIvmBug==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.99kB (237326 bits)
Date Submitted2014-02-26 00:00:00
Date Available2014-02-26 00:00:00
Creation Date2002-07-17 16:56:25
Producing SoftwareAcrobat Distiller 3.01 für Power Macintosh
Document Lastmod2002-07-17 16:58:41
Document Titlefahren.fm
Document CreatorFrameMaker 5.5.6
Document Author: ar
FCC ID Filing: NF3-MRR1REAR

Navigation menu