Rongta Technology RP410BU Label Printer User Manual
XIAMEN RONGTA TECHNOLOGY CO.,LTD. Label Printer Users Manual
Contents
- 1. Users Manual
- 2. User Manual
- 3. user manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3688658 |
| Application ID | XoULgFhcMEOVIba0nSrBbA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 96.45kB (1205565 bits) |
| Date Submitted | 2017-12-21 00:00:00 |
| Date Available | 2017-12-21 00:00:00 |
| Creation Date | 2016-10-17 17:29:51 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2017-12-21 18:28:46 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Administrator |
USER MANUAL RP410 Catalogue Manual information .................................................................................................................. 1 Safety Instruction....................................................................................................................... 3 1. Product introduction ........................................................................................................... 5 1.1 Box list ................................................................................................................................ 5 1.2 Appearance and components ................................................................................... 6 2. Product Specification .......................................................................................................... 7 2.1 Specification ..................................................................................................................... 7 3. Installation ............................................................................................................................... 8 3.1 Power connection .......................................................................................................... 8 3.2 How to connect printer and PC ................................................................................ 9 3.3 Install paper roll ............................................................................................................ 10 3.3.1 Inside......................................................................................................................... 10 3.3.2 Outside ..................................................................................................................... 11 3.4 The operator panel ...................................................................................................... 13 3.4.1 The operational method of FEED ................................................................... 13 3.42 Led indication of printer status ........................................................................ 13 3.5 Printing Test ................................................................................................................... 14 3.5.1 Print Self-test Page .............................................................................................. 14 3.5.2 Use Windows Driver Programs to Print ........................................................ 14 3.6 Label Study ..................................................................................................................... 14 4. Clean the printer ................................................................................................................. 15 4.1 Clean the printer head ............................................................................................... 15 4.2 Clean the sensor, the rubber roller and paper path ........................................ 16 5. Troubleshooting .................................................................................................................. 16 5.1 FAQ.................................................................................................................................... 16 Manual information This manual includes product user, installation, etc. Please refer to the below details for all kinds of technical issues and territory. 1. Manual for driver and program. This manual includes information such as windows instruction for driver and program and main function. 2. Printer practical tools manual This manual includes usage method of option of product function, amendment of operating conditions, etc. 3. Program Manual This manual includes information of command of label printer. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Safety Instruction Please read the following precautions to avoid personal injury or equipment damage before installing and using the printer. 1. Safety warning Warning: The print head is heating component, during printing and immediately after printing; do not touch the print head and peripheral components. Warning: Do not touch the print head and the connection plug, so as to avoid electrostatic damage to the print head. 2. Safety Precautions 1. Do not plug several products in one multi-outlet 2. You can only use this package supplied adapter. 3. Do not pull the plug by pulling the cable way 4. Do not plug or unplug the power cord when your hands wet. 5. Do not bend the cable, or place it under heavy objects. 6. Install the printer on a stable surface. 7. Use only approved accessories, do not try to disassemble, repair, or modification the printer. 8. Do not let water or other objects in the printer. 9. Leave enough space for operation and maintenance around the printer. 10. The printer should be away from water, keep out of sunlight and heat. 11. Don not USE or preserve the printer in a high temperature, humidity or Severe pollution place. 12. Avoid to place the printer in a vibration and impact environment. 13. Connect the power adapter to a proper grounding socket, and avoid to use same power socket with large electrical machine or other can cause the power supply voltage fluctuation device. 14. Please disconnect the power of the printer power adapter, If a long time do not use the printer. 15. In order to keep good quality of printing and long life of the product, suggest to use recommended by the same quality of paper. 16. Plug or disconnect each interface, must turn off the power, Otherwise it may cause the printer control electrical damage of the road. 17. Keep this manual for reference. 1. Product introduction 1.1 Box list Caution： 1. open the printer packaging, keep the packaging materials, to facilitate the future of packaging and transportation 2. if there is any damage or loss of goods, please contact the dealer who sell the product Standard accessories Optional accessories 1.2 Appearance and components Front view Rear View Inner View 2. Product Specification 2.1 Specification Project Printing Storage Barcode type Detecting Function Parameters Printing method Thermal Transfer/Direct Thermal Resolution 203dpi Max printing width 104mm Printing speed 5inch/s 127mm/s (hoisting speed 150mm realizable 150mm) Interface USB 2.0 RAM 8M Flash 4M（expand memory 8M realizable） 1D Code 39、Code 93、ITF、EAN 128、Code 128、subsetsA、B、C、Codabar、EAN-8、 EAN-13 、 UPC-A 、 UPC-E 、 EAN and UPC 2(5) 、 digits 、 add-on 、 MSI 、 MSIC 、 PLESSEY、CPOST、ITF 14、EAN 14 2D QR code Sensor Gap sensor, Paper End Sensor, uncover sensor, black mark sensor Power supply External Power Specification：24V 2.5A Peak Value：8A LED indicator Unit Key RGB LED Type Tagboard, Continuation paper, Black mark paper Label Width Min 26.7mm Label Height Min 20mm Paper Command Character max 120mm max 300mm TSC Operation Temperature 0°C~50°C Storage Temperature -10°C~60°C Dimension 217mm*182mm*170mm Net Weight 1.4kg Adaptor、USB cable、Power cable、CD、 Accessories user manual、Warranty Car、Certificate,、 paper tray(optional) Reliable data TPH lifespan 50km Software Operation System XP/Win7/Win8/Win10 3. Installation 3.1 Power connection 1. PLS take attention to make confirmation if the printer power button on “off” position. 2. Connect adaptor plug with printer outlet at second step. 3. Adaptor pin plug contact with power socket. 4. PLS connect the other side of the power cable to the power plug socket. Caution： PLS make sure use our original compatible power adaptor to avoid damaging the printer. If do not using printer for an extended period, PLS disconnect it from power. 3.2 How to connect printer and PC PLS follow up below step for connecting. 1. PLS make sure the printer is off. 2. PLS contact PC and printer with communication cable like as USB/Serial/Parallel. 3.3 Install paper roll 3.3.1 Inside 1. Open fixing seat, put in paper roll with printed face above. 2. Make paper front through paper guide, pull paper exceed rubber roller, adjust paper guide to fix the paper according to the paper width. 10 3. Close printer cover, press down to hear “ka” to lock. 3.3.2 Outside 1. Make paper front through paper-feeding slot on the back of printer, confirm the printed face on above. 2. Open fixing seat, push up the L seat to lock. 11 3. Make paper front through paper guide, pull paper exceed rubber roller, adjust paper guide to fix the paper according to the paper width. 4. Close printer cover, press down to hear “ka” to lock. 12 3.4 The operator panel 3.4.1 The operational method of FEED printer status Operation of FEED standby press standby Press(3 seconds) Power off Open the cover Continuous printing Print pause Function Feed in a blank paper automatically Enter into the learn mode of cover sheet Hold （release after power on) Print out self test page Press 10 seconds Factory Reset press Print pause press Resume Printing 3.42 Led indication of printer status Led status The representative of the printer status Green light shine Normal standby Green light slow flashing Printer working Blue light shine RAM Test Errors Pink light shine Printer head over heat Red light shine The above cover is not covered Red light flashing No paper detected Yellow light shine always Low input voltage Yellow light flashing Paper jam White light shine always Print pause 13 3.5 Printing Test 3.5.1 Print Self-test Page When initially install printer or any problems happen to printer, you can make a self-test page to check status of firmware version, printer parameter setting, printing quality and related setting information of external equipments etc. Once you confirm printer does not have any problems after self-testing, please check other devices or software. Self-testing function is working independently with other devices and software. Self-test page printing methods as follow: 1. Make sure printer is power linked, and paper roll installed properly. 2. Make sure is power off, and the cover is closed properly. 3. Hold the paper feed button, then press the power button; when printer is power on please loosen the feed button. 3.5.2 Use Windows Driver Programs to Print 1. Install Windows driver, refer to “RP4xx Windows Driver manual” to finish driver installation. 2. Windows driver "port" is set to printer corresponding interface. 3. Use “print self-test page” function of Window driver to make self-testing. 3.6 Label Study Cautions: In the following cases, user better study some label positioning knowledge, as to better locate label position: First time to install and use printer; Use printer after first senor clearance; Re-use printer after a very long time; Change new type of paper rolls; During printing, printer can not recognize mark effectively. 14 Under the printer ready state, long press paper feed 3s, after the status lights (blue one) flash 2 times, release feed button. But if the printer is studying under continuous feed mode, this study will be invalid Users can also make the study from the printer tool software (see "printer setup tool instructions"). Cautions: After the completion of the study, please open the cover, roll back the blank label paper for real printing, to avoid the waste of paper. 4. Clean the printer Dust, foreign matter, sticky substance or other blocking contaminants within the printer head or within the printer may lower the print quality. Follow the following methods to clean the printer head when it is dirty. ※ Note Turn off the power before cleaning the printer The printer head will be hot after printing. PLS turn off the printer and wait for 2 to 3 minutes before cleaning the printer head. During cleaning, DO NOT touch the heated part of the printer head to avoid damage due to static electricity to it. DO NOT scratch or damage the printer head. 4.1 Clean the printer head 1. Open the printer cover, use the cleaning pen (or cotton swab moistened with diluted alcohol (ethanol or isopropanol) to clean the printer head with the direction from the center to two ends. 2. DO NOT use the printer immediately after cleaning the printer head. Need to wait for the cleaning alcohol used to dry completely (about 1-2 minutes) and the printer head is completely dry before using the printer. 15 4.2 Clean the sensor, the rubber roller and paper path 1. Open the printer cover and remove the paper roll. 2. Use a dry cloth or cotton swab to wipe off dust or foreign matter. 3. Place cloth or cotton swab dipped in alcohol for medical. And use it to remove adhesive foreign substances or other contaminants. 4. DO NOT use the printer immediately after cleaning the parts. Need to wait for the cleaning alcohol used to dry completely (about 1-2 minutes) and the printer head is completely dry before using the printer. ※ Clean the parts when the print quality or paper detection performance descends. 5. Troubleshooting 5.1 FAQ The contents of the table below are common problems and problem-solving methods for general operators. If you are already in accordance with our easy way to troubleshooting, but the printer still not work normally, PLS contact the manufacturer's customer service department in order to get more help. Problems light is off Possible Causes a. Recommended Solution AC socket and a. PLS double check if AC socket adaptor plug are not and adaptor plug are properly properly connected connected with printer plug or with printer plug; not; b. Printer power switch b. Switch on the power; is off; Not printing a. Communication a. Reconnect cable is not properly connecting printer & PC; b. Fault setting the communication 16 cables; communication interface; c. Printer status error; b 3.42 reference manual printer various states of LED indicator, confirm whether the printer in the standby state (green light normally on); Incorrect positioning a. No label locating a. Do label locating learning(take learning; reference of Point 3.6); b. Seam mark detection b. PLS open the cover to check sensor components the seam mark detection position offset; components position offset. c. Selection mode Black mark paper: The mark error; detection components move according to the black mark position, so the detection sensor can detect the black mark. Label paper/continuous paper: detection sensor should be in the range of paper width; c. PLS use the setting tool to check the printer info, to confirm the paper type is 17 consistent with the paper loaded in the printer, it can be changed by setting tool; Poor print quality a. Incorrect paper a. Reloading paper(take reference loading; of Point 3.3 loading the media); b. Improper setting of b. Use setting tool or software to printing density and adjust the printer printing speed; density and speed. Setting tool c. Printer head/rubber adjusting concentration for roller has dust or coarse adjustment, drive to glue; adjust concentration for fine- d. Printer head tuning; damaged; c. Cleaning printer head/rubber roller(take reference of Point 4.1 cleaning printer head/Point 4.2 cleaning sensor, rubber roller and paper path); d. Use setting tool to check the head defect point, if the printer head damaged, PLS contact with the manufacturer's customer service department for repairing; Printing incomplete a. Paper is not placed centered; a. Adjust paper position; b. Set correct label size; b. Label size setting incorrect; 18 Bluetoothcommunication RP 410 printerscanprovidedualmodeBluetooth4.0（SPP+BLE），itcan communicatewithapple4S,ipad3,ipad4latermodels.Effectivecommunication distancelessorequal10m。 Bluetoothdefaultpairingpassword:0000, itcanbesettingupwithparametersettings. Formoredetails《Toolsettingmanul》。
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2016:10:17 17:29:51+08:00 Modify Date : 2017:12:21 18:28:46-08:00 Has XFA : No Language : zh-CN Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Administrator Creator Tool : Microsoft® Word 2010 Metadata Date : 2017:12:21 18:28:46-08:00 Producer : Microsoft® Word 2010 Document ID : uuid:bfb4a34c-83bf-4219-bf97-85864b96e260 Instance ID : uuid:350b3f71-43ee-4909-8913-65e1fdc4c8d9 Page Count : 21EXIF Metadata provided by EXIF.tools