Ruckus Wireless 7962 802.11a/b/g/n Access Point User Manual Ruckus Wireless AP ZF2942 7942

Ruckus Wireless, Inc. 802.11a/b/g/n Access Point Ruckus Wireless AP ZF2942 7942

User Manual

Download: Ruckus Wireless 7962 802.11a/b/g/n Access Point User Manual Ruckus Wireless AP ZF2942 7942
Mirror Download [FCC.gov]Ruckus Wireless 7962 802.11a/b/g/n Access Point User Manual Ruckus Wireless AP ZF2942 7942
Document ID1087255
Application IDxwBuenUg/OlZw4Z0yqCepA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.37kB (167123 bits)
Date Submitted2009-03-28 00:00:00
Date Available2009-03-29 00:00:00
Creation Date2007-02-21 14:03:02
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-02-09 11:18:29
Document TitleRuckus Wireless AP ZF2942/7942
Document CreatorFrameMaker 8.0
Document Author: Ruckus Wireless

STEP 1: CONNECT THE AP
ZoneFlex 2942/7942/7962
Access Point
Quick Setup Guide
TO
YOUR COMPUTER
After removing your Ruckus Wireless AP from its package,
place it next to your computer.
Temporarily disconnect your computer from any local network, if connected.
Using an Ethernet cable, connect your computer’s network
port to one of the two ports on the AP.
•
•
•
2942 (pictured below): 10/100 and 10/100 PoE
7942: 10/100/1000 and 10/100/1000 PoE
7962: 10/100/1000 and 10/100/1000 PoE
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and then click Properties.
The TCP/IP Properties dialog box appears.
IMPORTANT!
Write down all of the currently active settings so you can
restore your computer to its current configuration later
(when this process is complete).
Select Use the following IP address option (if it is not
already selected), and then make the following entries:
•
IP address: 192.168.0.22 (or any address in the
192.168.0.x network)
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
Leave the Alternate DNS server field empty.
This Quick Setup Guide provides step-by-step instructions on
how to set up your Ruckus Wireless ZoneFlex Access Point.
After completing the steps described in this Guide, you will be
able to place the Access Point (AP) at your site and provide
wireless network access to users.
BEFORE YOU BEGIN
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
•
•
Your changes are put into effect immediately.
Release Notes are available at
http://support.ruckuswireless.com/documents.
STEP 3: LOG INTO THE AP
User Guides are available at
As specified earlier, the AP should be directly connected to
your computer (through one of the LAN ports), and have been
powered on, ready for setup.
http://support.ruckuswireless.com/documents.
•
Software Upgrades are available at
http://support.ruckuswireless.com/software.
•
Open Source information is available at
PACKAGE CONTENTS
One ZoneFlex 2942/7942/7962 Access Point
•
One AC power adapter
•
One mounting kit (with printed instructions)
•
This Quick Setup Guide
SETUP REQUIREMENTS
A computer Windows Vista, Windows XP, or Windows 2000
•
One or more of the following:
•
•
A modem (DSL or cable), E1/T1 router, or other device
provided by your Internet Service Provider, that brings
Web access to your site.
A network switch or a DSL/Internet gateway device.
After a minute, verify that the LED on the external enclosure is a steady green.
STEP 2: PREPARE YOUR COMPUTER
•
Using the AC adapter included in the package, connect
the AP to a convenient (and protected) power source.
Alternatively, connect the 10/100 POE port or the 10/100/
1000 POE port to a PoE (Power over Ethernet) switch for
power and network connectivity.
http://support.ruckuswireless.com/open_source.
•
Click OK to save your changes, exit first the TCP/IP Properties dialog box, and then the Local Area Connection
Properties dialog box.
FOR
On your computer, open a Web browser window.
In the browser, type this URL to connect to the AP:
https://192.168.0.1
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
When the Ruckus Wireless Admin login page appears,
enter the following:
AP SETUP
On your Windows computer, open the Network Connections
(or Network and Dial-up Connections) control panel according
to how the Start menu is set up:
Start > Settings > Network Connections
Start > Control Panel > Network Connections
When the Network Connections window appears, rightclick the icon for Local Area Connection, and then click
select Properties.
IMPORTANT!
IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to
your Ethernet network.
Make sure you do not open the Properties dialog box for
the wireless network.
Copyright © 2009 Ruckus Wireless, Inc.
Published February 2009, Part Number 800-70119-001 REV C
• Username: super
• Password: sp-admin
Click Login.
Default AP Settings (For Your Reference)
Network Names (SSIDs)
Wireless1—Wireless4
Security (Encryption
method)
Disabled for each wireless
interface
Default Management IP
Address
192.168.0.1
IF YOUR COMPUTER CANNOT CONNECT TO THE AP
•
Disconnect the AP from the power source, wait 5 seconds,
then reconnect it—and wait 60 seconds before attempting a
reconnection.
•
Disconnect and reconnect the AP and the computer.
•
Replace the Ethernet cable with a new one if the relevant
LAN port LED is not illuminated. (LEDs in each port light up
during a successful connection.)
STEP 4: CUSTOMIZE
THE
WIRELESS SETTINGS
On the Web interface menu, click Configuration > Wireless.
The Configure::Wireless::Common options appear.
Verify that the following options are active:
•
•
•
OPTIONAL: IF YOU WANT TO SWITCH FROM DHCP
(DEFAULT)
A. On the menu, click Configuration > Internet.
B. Click the Static IP option.
C. Fill in the IP Address and Mask fields.
D. Click Update Settings to save your changes.
11 Disconnect the AP from the computer and from the current power source, and then restore your computer to the
normal network connections.
Wireless Mode: Auto-select
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
Click Update Settings if you made any changes.
Click any of the four “Wireless #” tabs.
In Wireless Availability, click Enabled.
Delete the text in the SSID field, and then type the name
of your network. If your network does not have a “name”,
type a short name that will help your users identify the AP
in their wireless network connection application.
When the Network Connections window appears, rightclick the icon for the “Local Area Connection” designated
for your home network and choose Properties.
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and click Properties.
Replace the recent AP connection entries with the entries
from your standard network configuration.
Click OK to save your settings and exit first the TCP/IP
Properties dialog box, then the Local Area Connection
Properties dialog box.
Click Update Settings to save your changes.
Repeat Step 4-7 for each Wireless # interface that you
want to enable.
NOTE
If you anticipate logging into the AP regularly to perform
monitoring or maintenance (once it is in place), you may
want to consider assigning a static IP address to the AP. This
would simplify connections made to the AP for all postinstallation maintenance.
In a default AP configuration, the AP uses a DHCP-assigned
IP address. Any post-installation connections require (1) a
reverse ARP lookup or (2) logging into the DHCP server, to
determine which IP address is in effect in the AP.
See the Ruckus Wireless 2942/7942/7962 AP User Guide for
more information on IP address assignment options and
logging into the AP through either a static IP or dynamic IP
address.
Use the wall-mount bracket to help secure the AP in an
advantageous location on the wall or ceiling. Follow these
guidelines:
•
•
Click Logout to exit the Ruckus Web Admin interface.
10 When the Web Admin login page reappears, you can exit
your browser.
STEP 5: RESTORE YOUR COMPUTER’S NETWORK
SETTINGS
TIP
Click Start > Settings > Network Connections.
(If Windows 2000, click Start > Settings >Network and
Dial-up Connections.)
The TCP/IP Properties dialog box appears.
Your computer is now ready for normal network use.
STEP 6: PLACE
THE
AP IN YOUR SITE
Disconnect the AP’s power adapter from the power outlet.
Move the AP to its permanent location (accessible to both
AC power and ISP connections).
Copyright © 2009 Ruckus Wireless, Inc.
Published February 2009, Part Number 800-70119-001 REV C
•
•
Place the AP as close to the center of the room, and away
from any physical obstructions.
Place the AP on a shelf or other elevated location where the
user’s wireless networking devices are in line-of-sight
access.
Avoid any sources of electromagnetic interference.
Avoid placing the AP near large metal or glass surfaces.
Use an Ethernet cable to connect the 10/100 or 10/100/
1000 port of the AP to the appropriate device:
•
•
The ISP’s modem or gateway device
The Ethernet switch that is connected to the ISP’s
device
Connect the AP power adapter to the AP, then to a convenient power source.
Verify that the 10/100 or 10/100/1000 port LED is lit.
After a short pause to re-establish the Internet connection, you
can test the AP.
STEP 7: VERIFY THE INSTALLATION
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you’ve previously
configured.
If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready for
use.
FOR MORE INFORMATION
You can now use the wireless network to log into the AP’s Web
interface. Use the Web interface to review and fine-tune a
wide range of AP settings.
For information on how to configure the AP from the Web
interface, refer to the online help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2009:02:09 11:18:29+08:00
Create Date                     : 2007:02:21 14:03:02Z
Metadata Date                   : 2009:02:09 11:18:29+08:00
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942
Creator                         : Ruckus Wireless
Description                     : Quick Setup Guide
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:50ddcb02-53b8-455d-ad8c-84c0fd7eeeab
Instance ID                     : uuid:5153e616-94d7-4fdb-91cc-413a4c35a3a3
Page Count                      : 2
Subject                         : Quick Setup Guide
Author                          : Ruckus Wireless
EXIF Metadata provided by EXIF.tools
FCC ID Filing: S9G7962

Navigation menu