Ruckus Wireless R310 ZoneFlex R310 Access Point User Manual

Ruckus Wireless, Inc. ZoneFlex R310 Access Point Users Manual

a href="https://usermanual.wiki/Ruckus-Wireless" itemprop="url"> Ruckus Wireless >

Contents

Users Manual

Copyright © 2015 Ruckus Wireless, Inc. Page 1 of 4Published 24 July 2015, Part Number 800-70972-001 Rev AZoneFlex R310 Access PointQuick Setup GuideThis Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless ZoneFlex R310 access point. After completing the steps in this guide, you will be able to place the access point at your site and provide network access to wireless clients. The rest of this document refers to the ZoneFlex R310 access point as an AP.BEFORE YOU BEGINBefore deploying your Ruckus Wireless device, please check the Ruckus Wireless Web site for the latest software and release documentation.• Release Notes and User Documents are available at http://support.ruckuswireless.com/documents• Software Upgrades are available athttp://support.ruckuswireless.com/software• Open Source information is available athttp://support.ruckuswireless.com/open_sourceTHIS GUIDE IN OTHER LANGUAGES•请从以下网站获得该指南的简体中文版 https://support.ruckuswireless.com• Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com•󴎾 󴏙 ガ イ ド 󴏙日本語版󴏚 https://support.ruckuswireless.com で󴎿覧く だ󴏀い•이 가이드의 한국어 버전은 웹 사이트(https://support.ruckuswireless.com)에서 확인하시기 바랍니다• Veja a versão em português (Brasil) deste guia em https://support.ruckuswireless.com• Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.comFigure 1. ZoneFlex R310 APPACKAGE CONTENTS• One ZoneFlex R310 access point• Two mounting screws and plastic wall anchors• One T8 5mm M2.5 Torx locking security screw• One unit removal pin• Regulatory flyer• Product warranty statement• Declaration of conformity, if required• Ruckus Wireless AP Getting Started Guide •This Quick Setup GuideCONFIGURING THE AP•Step 1: Collecting the AP MAC Address•Step 2: Collecting Setup Requirements, Hardware, and Tools•Step 3: Connecting Your Computer to the AP•Step 4: Preparing Your Computer for AP Setup•Step 5: Logging Into the AP Web Interface•Step 6: Customizing the Wireless Settings•Step 7: Placing the AP at the Site•Step 8: Verifying the InstallationStep 1: Collecting the AP MAC Address• Write down the MAC address (12 alphanumeric digits) from the outside of the AP.Step 2: Collecting Setup Requirements, Hardware, and Tools • A computer with Ethernet adapter running Windows 7 or equivalent, with Firefox or equivalent web browser.• One Cat 5e (or better) Ethernet cable.• T8 Torx screwdriver.• An AC-to-12VDC power adapter (sold separately)--OR--an 802.3af-compliant Power over Ethernet (PoE) switch or PoE injector.Step 3: Connecting Your Computer to the APAAfter removing the AP from its package, place it next to your computer.BUsing an Ethernet cable, connect your computer’s network port to the POE IN port on the AP. CConnect the AC power adapter (sold separately) to the 12VDC AP port, and plug the AC power adapter into a convenient and protected AC power source. Alternatively, connect the POE IN port to a PoE injector or PoE switch for both power and network connectivity.Figure 2. AP rear panelDAfter bootup, verify that the PWR LED on the AP is a steady green.Step 4: Preparing Your Computer for AP SetupAOn your Windows 7 computer, configure your network adapter from the Local Area Connection settings as follows:• Start > Control Panel > Network and Sharing Center > Change Adapter SettingsNote:The minimum software revision for the AP is base image 100.x or later, SmartZone 3.2 or later, or ZoneFlex 10.0 or later. The rest of this document collectively refers to the SCG SZ, vSZ, ZD, and other controllers as Ruckus Wireless controllers. Important!If the AP is to be managed by a Ruckus Wireless controller, then follow the controller user documents to connect the AP to your local network and configure it for initial operation. In that case, you may not need to complete the following steps.Note:The following procedures assume that Windows 7 is the operating system. Procedures for other operating systems are similar.
Copyright © 2015 Ruckus Wireless, Inc. Page 2 of 4Published 24 July 2015, Part Number 800-70972-001 Rev ABEdit the TCP/IPv4 address settings as follows: • Local Area Connection > Properties > Internet Protocol Version 4 (TCP/IPv4) > PropertiesThe Internet Protocol Version 4 (TCP/IPv4) Properties dialog box appears.CSelect Use the following IP address (if it is not already selected) and then make the following entries:•IP address: 192.168.0.22 (or any available address in the 192.168.0.x network, except 192.168.0.1, which is the default used by the ZoneFlex R310 AP)•Subnet mask: 255.255.255.0• Leave the DNS server and Default gateway fields empty.DClick OK to save your changes. Your changes are put into effect immediately. Step 5: Logging Into the AP Web InterfaceAs specified in Step 4: Preparing Your Computer for AP Setup, the computer should be connected to your AP through the Ethernet port and powered on, ready for setup.AOn your computer, open a Web browser window.BIn the browser, enter https://192.168.0.1 to connect to the AP. CPress <Enter> to initiate the connection. When a security alert dialog box appears, click OK/Yes to proceed.DWhen the Ruckus Wireless Admin login page appears, enter the following: •Username: super•Password: sp-adminEClick Login.Step 6: Customizing the Wireless SettingsAOn the AP Web interface menu, click Configuration > Wireless > 5G or Configuration > Wireless > 2.4G. The Configure > Wireless > Common options appear. BVerify that the following options are active:•Channel: SmartSelect•Channel Width: 20 MHz, 40 MHz, or 80 MHz (default).•Country Code: Select the country in which the AP will be operating.CClick Update Settings if you made any changes.DClick any of the eight Wireless # (Wireless LAN Number) tabs at the top of the page. EIn Wireless Availability, click Enabled.FDelete the text in the SSID field, and then type a name for your network that will help your users identify the AP in their wireless network connection application.GClick Update Settings to save your changes.HIf required, repeat Steps D-G for any other Wireless # (Wireless LAN Number) interface that you want to enable. IClick Logout to exit the Web interface.JDisconnect the AP from the computer and from the current power source, and then restore your computer to its original network configuration. Step 7: Placing the AP at the SiteAMove the AP to its permanent location (accessible to both AC or PoE power and network connection). BUse a Cat 5e (or better) Ethernet cable to connect your network (or PoE injector or switch) to the POE IN port on the AP.--OR--If you are not using an 802.3af-compliant PoE switch or PoE injector, then connect the AC power adapter to the AP, and then to a convenient power source.CVerify that the POE IN port LED is lit.Step 8: Verifying the InstallationAUsing any wireless-enabled computer or mobile device, search for and select the wireless network you previously configured. BIf you can connect, open a browser and link to any public Web site.Congratulations! Your wireless network is active and ready for use. If you need to configure advanced wireless settings, such as enabling security, refer to the Ruckus Wireless Indoor AP User Guide.INSTALLING THE APThe AP can be mounted on a flat surface, on a drop-ceiling T-bar, or on a pole or flat surface. Refer to the following sections:•Mounting on a Flat Surface•Removing the AP from Flat-Surface Mounting Screws•Mounting the AP on a Drop-Ceiling T-Bar•Removing the AP from a Drop-Ceiling T-Bar•Mounting the AP on a Flat Surface or Pole Using the Optional Secure Mounting Bracket•Removing the AP from the Optional Secure Mounting BracketMounting on a Flat SurfaceThe factory-supplied mounting screws and plastic wall anchors allow you to attach the AP to a wall or ceiling.AUse the Mounting Template on the last page of this guide to mark the locations for two drill holes on the mounting surface. BUse a 4.75mm (3/16”) drill bit to drill holes approximately 25mm (1”) deep into the mounting surface.CInsert the factory-supplied anchors (A in Figure 3) and mounting screws (B) into the mounting surface, leaving approximately 6 mm (1/4”) of the screw heads protruding from the surface. Figure 3. Mounting the AP on a flat surfaceDPlace the AP onto the mounting screws so that the screw heads enter the keyholes on the AP enclosure (C), and gently press down on the AP until the locking tab in the upper AP keyhole locks the AP onto the top mounting screw.Important!Write down all of the currently active settings so you can restore your computer to its current configuration when this procedure is completed.Note:If you purchased the AP in the United States, then this value is fixed to United States at the factory and is not user configurable. If you purchased the AP outside the United States, then verify that the value is set to your country or region. Selecting the correct country code ensures that the AP uses only the radio channels allowed in your country or region.ABC
Download:
Mirror Download [FCC.gov]
Document ID2807140
Application IDGHGnvBKSE/Vsrv1yXVTTjA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize105.8kB (1322491 bits)
Date Submitted2015-11-09 00:00:00
Date Available2015-11-10 00:00:00
Creation Date2017-09-04 01:10:41
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-09-04 01:10:41
Document TitleUsers Manual
Document CreatorAdobe Acrobat Standard DC 15.6.30094
Document Author: Ruckus Wireless, Inc.
FCC ID Filing: S9GR310

Navigation menu