S E M SEM-Q-7 Bluetooth Alarm Clock With USB Charging Ports User Manual Q 7 BTV3W s09 English IM V1 171123

Download:
Mirror Download [FCC.gov]
Document ID	4074633
Application ID	Y7/vihhT9mSqwp6TSmdNgQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.9kB (386297 bits)
Date Submitted	2018-11-16 00:00:00
Date Available	2018-11-16 00:00:00
Creation Date	2018-10-10 09:19:53
Producing Software	Corel PDF Engine Version 3.0.0.739
Document Lastmod	2018-10-10 09:19:53
Document Title	Q-7-BTV3W-s09_English IM_V1_171123
Document Creator	CorelDRAW
Document Author:	mantat

The lightning flash and arrowhead within the triangle is a warning sign
alerting you of "dangerous voltage" inside the product.
OPERATING INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION:
The exclamation point within the triangle is a warning sign alerting you of
important instructions accompanying the product.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
THE AC/DC ADAPTOR IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN
READILY OPERABLE. TO COMPLETELY DISCONNECT THE POWER INPUT, THE
AC/DC ADAPTOR OF THE APPARATUS MUST BE DISCONNECTED FROM THE MAINS
COMPLETELY. THE AC/DC ADAPTOR SHOULD NOT BE OBSTRUCTED OR SHOULD BE
EASILY ACCESSED DURING INTENDED USE.
CAUTION
PLEASE NOTE: YOU WILL FIND THE
RATING LABEL FOR THIS PRODUCT
LOCATED ON THE BOTTOM OF THE UNIT.
DO NOT EXPOSE TO DRIPPING
OR SPLASHING LIQUIDS!
CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE TAKEN
SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN
RECEPTACLE "WALL SOCKET".
NOTE: CAUTION SYMBOLS ARE PRINTED ON BOTTOM OF UNIT.
PLEASE REFER TO INSTRUCTION MANUAL.
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
VORSICHT: UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZENI.
VARNING: OSYNLIG LASERSTRÁLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAND. STRÁLEN ÄR FARLIG.
ADVARSEL: USYNLIG LASERSTRÁLING VED ÁBNING. NÁR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ
UDS/ETTELSE FOR STRÁLING.
Bluetooth
Alarm Clock With USB Charging Ports
MODEL: Q-7-BTV3W
ATTNENZIONE: RADIONS LASER INVISIDILE. NON GUARDARE DIRETTAMENTE NELLA SORGENTE DEL LASER.
ACHTUNG: LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL.
AVISO: A LENTE NUNCA DEVE SER TOCADA.
THE APPARATUS SHOULD NOT BE EXP OSED TO DRIPPIN G OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS SHOULD BE PLA CED ON THE APPARATUS.
THE MARKING AND RATING LABEL IS LOCATED AT BOTTOM ENCLOSURE OF THE APPARATUS.
UNDER THE INFLUENCE OF ELE CTROSTATIC PHENOMENON,
THE PRODUCT MAY MALFUNCTION AND USER TO POWER RESET.
- KEEP MINIMUM DISTANCES (5cm) AROUND THE APPARATUS OF SUFFICIENT
VENTILATION.
- NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED
ON THE APPARATUS.
- THE USE OF APPARATUS IN MODERATE CLIMATES.
E-2
POWER SUPPLY
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
FRONT VIEW:
TOP VIEW:
21
- THIS SET COMES ATTACHED WITH AN AC-ADAPTOR WITH A RATING OF DC = 5V, 3A.
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- THE ADAPTOR IS ALREADY PLUGGED INTO THE REAR OF THE UNIT AND PROTECTED
BY A CABLE-GUARD.
- INSERT THE PLUG OF THE AC-ADAPTOR INTO A WALL OUTLET WITH AC-POWER.
- PRESS THE "ON/ OFF" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ OFF" KEY.
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.
BACK UP BATTERIES
BACK VIEW:
21
6 7 8
10 11 12
13
14 15 16
17
- OPEN THE BATTERY DOOR AT THE BOTTOM OF UNIT.
- INSERT 2 PCS "AAA-CELL" (UM-4/LR03 TYPE) BATTERIES IN THE BATTERY
COMPARTMENT. THESE 2 BATTERIES ARE FOR BACKUP OF THE "CLOCK"
DURING BRIEF POWER OUTAGES.
DIMMER FUNCTION
18
19
THIS SET HAS A DIMMER FUNCTION TO ADJUST THE BRIGHTNESS LEVEL
OF THE DISPLAY BACKLIGHT. SIMPLY ADJUST IT AS DESIRED BY PRESSING
THE "SNOOZE/ DIMMER" KEY REPEATEDLY (HI-BRIGHTNESS / LOW-BRIGHTNESS / OFF)
THE DISPLAY BACKLIGHT WILL ALWAYS RETURN TO HI-BRIGHTNESS AS THE DEFAULT,
AFTER THE UNIT BEEN RESET.
DIGITAL CLOCK FUNCTION
20
LOCATION OF CONTROLS
1. SPEAKER
2. LED DISPLAY
3. BACK-UP BATTERY
COMPART MENT (BOTTOM OF UNIT)
4. USB-1 SOCKET
(DC CHARGER: 5V/2000mA)
5. USB-2 SOCKET
(DC CHARGER: 5V/1000mA)
6. SOURCE KEY
7. FM MEMORY KEY
8. CLOCK SET/ FM MODE KEY
9. VOLUME KEY
E-3
10.
KEY
11.
KEY
12. PLAY/ PAUSE / PAIR KEY
13. VOLUME KEY
14. POWER ON/ OFF KEY
15. ALARM SET KEY
16. SLEEP KEY
17. SNOOZE/ DIMMER KEY
18. AUX-IN PLUG
19. POWER SUPPLY
20. FM ANTENNA WIRE
21. CABLE GUARD
- THE SET HAS A BUILT-IN DIGITAL CLOCK.
(THE DISPLAY WILL CONTINUOUSLY SHOW THE CURRENT TIME).
HOW TO SET CORRECT TIME:
1.
SWITCH UNIT TO "STAND- BY" MODE
2.
PRES S & HOLD
3.
OR
KEY REPE ATEDLY TO SET
PRES S
THE CORREC T HOUR IN THE DISPLAY & PRES S
4.
PRES S
OR
KEY REPE ATEDLY TO SET
THE CORREC T MINUTE IN THE DISPLAY & PRES S
5.
CORREC T TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.
Set
KEY FOR 3 SECOND S
Set
KEY TO CONFI RM.
Set KEY TO CONFI RM
ONE TOUCH DAYLIGHT SAVINGS TIME SWITCH
IN STANDBY MODE PRESS FM MEMORY KEY FOR 6 SECONDS, THE CURRENT TIME
WILL +1HOUR. PRESS AND HOLD FOR 6 SECOND AGAIN FOR -1 HOUR.
E-4
SINGLE-DAY ALARM FUNCTION
SNOOZE FUNCTION
EVERY TIME YOU SET THE WAKE-UP ALARM, IT WILL WORK ONLY ONCE (ONE TIME).
THIS MEANS THAT THE NEXT DAY, THE ALARM WILL BE RESET AND
WILL NOT AUTOMATICALLY WAKE UP AGAIN.
- W HENEVER THE ALARM C OMES O N, IT C AN B E TEMPORARILY S USPENDED
F OR A S HORT P ERIO D O F 9 M IN UTES, B Y P RESSIN G THE “ SNOOZE/ D IM MER” K EY
O NCE.
- THE ALARM W IL L THEN AUTOMATIC ALLY C OME O N AGAIN AFTER THE 9 M IN UTES
“ SNOOZE” P ERIO D H AS E NDED.
- THE P ROCEDURE C AN B E R EPEATED F OR APPROXIM ATELY 6 0 M IN UTES F ROM
O RIG IN AL ALARM WAKE-UP TIM E.
PREPARE FOR THE ALARM SETTINGS
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK.
(SEE "DIGITAL CLOCK FUNCTION" IN THE PREVIOUS SECTION) .
AUTOMATIC POWER OFF SLEEP FUNCTION
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS THE SLEEP KEY,
THE "SL" SYMBOL LIGHT ON, THEN PRESS THE SLEEP KEY REPEATEDLY
TO CHOOSE THE AUTOMATIC POWER OFF TIME.
A. "ALARM" TIME SETTING
1. PRESS THE
KEY TO PUT THE SET INTO "STANDBY" MODE.
2. PRESS AND HOLD
Set
KEY UNTIL THE DISPLAY SHOWS:
90
MINS
12 : 00
12 : 00
AL
AL
HOUR (FLASHING)
4. PRESS
AND
KEYS TO REACH THE DESIRED
Set KEY TO CONFIRM.
WAKE UP MINUTES THEN PRESS
THE DISPLAY WILL NOW SHOW:
8 : 00
AL
MINUTES (FLASHING)
5. THE ALARM TIME IS NOW FULLY PROGRAMMED AND
THE ALARM SYMBOL "AL" WILL APPEAR.
THE DISPLAY WILL THEN SHOW THE CURRENT TIME.
12 :00
AL
CURRENT TIME
ALARM SYMBOL
6. THE SET WILL NOW AUTOMATICALLY SWITCH "ON" AT THE WAKE-UP TIME AS YOU
HAVE CHOSEN, AS LONG AS THE ALARM SYMBOL IS VISIBLE.
7. TO TURN OFF THE ALARM AFTER IT HAS AUTOMATICALLY SWITCHED ON,
SIMPLY PRESS THE
KEY ONCE. THIS WILL SWITCH OFF THE SET,
ALSO THE ALARM SETTINGS WILL CLEAR.
TO DEACTIVATE THE ALARM:
IF THE ALARM SYMBOL "AL" IS VISIBLE, THE ALARM IS "ACTIVE".
Set ONCE. THE "AL" SYMBOL WILL DISAPPEAR.
TO DE-ACTIVATE THE ALARM, PRESS
THIS MEANS THE ALARM FUNCTION IS NOT ACTIVE.
E-5
70
MINS
60
MINS
50
MINS
40
MINS
30
MINS
20
MINS
10
MINS
OFF*
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
HOUR (FLASHING)
3. PRESS
AND
KEYS TO REACH THE DESIRED
Set KEY TO CONFIRM.
WAKE UP HOUR THEN PRESS
THE DISPLAY WILL NOW SHOW:
80
MINS
BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET.
SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM
YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS THE
KEY TO TURN THE UNIT ON.
- PRESS THE SOURCE KEY UNTIL BT SYMBOL APPEARS.
- THE LED INDICATOR WILL FLASH SLOWLY TO INDICATE THE UNIT IS ON.
- PRESS AND HOLD "PAIR" KEY UNTIL THE LED INDICATOR FLASHING FAST AND
WAITING FOR PARING.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH® DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
- THE LED INDICATOR WILL KEEP REMAIN LIT WHEN PAIRED.
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANY DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION:
TO UNPAIR A BLUETOOTH® DEVICE THAT IS ALREADY PAIRED, PRESS AND HOLD
THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME DOWN KEYS
ON THE UNIT OR USING THE VOLUME CONTROLS ON YOUR BLUETOOTH® ENABLED
DEVICE.
*NOTE :
(1) THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT NOR YOUR
BLUETOOTH® DEVICE ARE SET TO ZERO VOLUME AND THE CORRECT DEVICE
FOR PLAYBACK IS PAIRED.
(2) WHEN THE UNIT IS IN "PAIRING" MODE, IT SEARCHES FOR A CONNECTION,
BUT WILL AUTOMATICALLY SWITCH OFF THE PAIRING MODE IF NOTHING CONNECTS
TO THE DEVICE WITHIN 2 MINS.
E-6
MUSIC PLAYBACK IN BLUETOOTH® MODE
- PRESS THE PLAY/PAUSE KEY
TO START PLAYBACK.
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE KEY
TO PAUSE
OPERATION. PRESS AGAIN TO RESUME OPERATION AT THE SAME TRACK & POSITION.
- AT ANYTIME DURING PLAYBACK, “PRESS AND RELEASE” THE NEXT OR BACK KEY :
OR
TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK, AS DESIRED.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)
- PRESS AND HOLD (FOR 2 SECONDS) THE
OR
KEYS TO “SEEK”
(AUTOMATICALLY ADJUST) THE RADIO
FREQUENCY “UP” OR “DOWN” TO THE NEXT AVAILABLE RADIO STATION.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE NEXT
STATION THAT IS FOUND.
- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE
“MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE THE INCLUDED AUX-CABLE
WITH 3.5MM STEREO PLUG THAT IS ATTACHED TO THE REAR OF THE UNIT
AND PLEASE CONNECT THIS TO THE "HEADPHONE-OUT OR AUDIO LINE-OUT"
OF THE DEVICE .
- SELECT THE FUNCTION TO "AUX" BY PRESSING THE SOURCE KEY ONCE.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT AND THE EXTERNAL DEVICE WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE.
- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE
STORED INTO ONE OF THE MEMORY POSITIONS.
- PRESS AND HOLD FM MEMORY KEY UNTIL "P01" FLASHES IN THE DISPLAY.
- PRESS
OR
KEYS TO SELECT DESIRED
MEMORY POSITION. (THERE ARE TOTAL 20 MEMORY POSITIONS).
- PRESS FM MEMORY KEY ONCE TO SAVE THE SELECTED STATION INTO THE
SELECTED MEMORY POSITION.
- TO RECALL ANY SAVED MEMORY, SIMPLY PRESS FM MEMORY KEY ONCE
THEN SELECT THE MEMORY POSITIONS BY PRESSING
OR
KEYS
THE SAVED RADIO-BAND WILL BE RECALLED.
- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO THE
SAME MEMORY POSITION.
ELECTRONIC VOLUME CONTROL
2 x USB CHARGING FUNCTION
- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL (PUSH BUTTON TYPE) .
- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS
THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.
- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.
- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE
A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR
DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL
DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE
DESIRED VOLUME LEVEL).
OPERATION OF RADIO
PRESS THE
KEY ONCE TO SWITCH ON THE UNIT.
PRESS THE SOURCE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "FM".
EXTEND AND ADJUST THE FM-WIRE ANTENNA TO OBTAIN THE BEST RECEPTION.
Set KEY TO SELECT THE DESIRED MODE (STEREO/ MONO).
USE THE
IN SOME CASES, WHERE RECEPTION IS POOR, IT MAY BE ADVISABLE TO
SELECT “MONO” MODE, TO IMPROVE CLARITY OF THE RADIO SIGNAL.
MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)
- PRESS (AND IMMEDIATELY RELEASE) THE
OR
KEYS TO “SCAN”
(MANUALLY ADJUST) THE RADIO
FREQUENCY “UP” OR “DOWN” BY 1-STEP AT A TIME.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH
STEP’S POSITION.
- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED INTO
ONE OF THE “MEMORY” POSITIONS. (SEE “RADIO MEMORY” SECTION).
E-7
THIS UNIT IS DESIGNED TO ALLOW YOU TO CONVENIENTLY CHARGE
UP TO 2 USB DEVICES.
THE USB PORTS ALLOW FOR CHARGING NOT ONLY MOBILE PHONES BUT ALSO
HUNDREDS OF OTHER DEVICES, INCLUDING MOST BLUETOOTH® HEADSETS,
PORTABLE GAME CONSOLES AND MANY MORE. TO USE THE USB PORTS CHARGING
CAPABILITY:
CONNECT THE TAIL END OF THE USB CABLE (SUPPLIED WITH YOUR MOBILE PHONE
OR OTHER DEVICE) INTO ONE OF THE USB PORTS, AND CONNECT THE OTHER END
OF THE USB CABLE INTO YOUR MOBILE PHONE OR DEVICE.
THE UNIT WILL THEN AUTOMATICALLY BEGIN CHARGING THE RESPECTIVE DEVICE.
USB CHARGING PORT:
USB-1 SOCKET: 5V/ 2000mA
USB-2 SOCKET: 5V/1000mA
SPECIFICATIONS
POWER SUPPLY : ............ DC 5V, 3A THOUGH BUILT-IN DC JACK
EXTERNAL AC-DC POWER ADAPTOR 100V-240V ~ 50/60Hz
SPEAKER : ........................ SPEAKER 2" x 2
FREQUENCY : .................. FM 87.5 - 108 MHz
E-8
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
E-9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
Create Date                     : D:20181010091953
Modify Date                     : D:20181010091953
Producer                        : Corel PDF Engine Version 3.0.0.739
Author                          : mantat
Creator                         : CorelDRAW
Title                           : Q-7-BTV3W-s09_English IM_V1_171123

EXIF Metadata provided by EXIF.tools