SAGEMCOM BROANDS FAST3686 Euro-DOCSIS3.0 User Manual

SAGEMCOM BROADBAND SAS Euro-DOCSIS3.0

a href="https://usermanual.wiki/SAGEMCOM-BROANDS" itemprop="url"> SAGEMCOM BROANDS >

User Manual

Page 1 1. Introduction This F@ST 3686 Cable Gateway is an Embedded Media Terminal Adapter (EMTA) which is CableLabs DOCSIS 3.0 and PacketCable 1.5 compliant. It provides high-speed Internet access as well as cost-effective, toll-quality telephone voice and fax/modem services over residential, commercial, and education subscribers on public and private networks via an existing CATV infrastructure. F@ST 3686 offers high-speed LAN connec tivity with 4 Gigabit Ethernet ports and one integrated Wireless LAN access point compatible with IEEE 802.11a/b/g/n. The Wireless access point is operating on 2.4GHz band. Package Contents F@S T3284u Gateway x1 Ethernet Cable (RJ45) x1 Phone Cable (RJ11) x1 Quick Start Guide x1 Power Supply Unit x1 2. Hardware Connection 2 1 3 4 5 6 1 2 3 4 6 5 RJ-11 Telephone port lines 1 and 2 Ethernet 10/100/1000 BaseT RJ-45 connector Restore To Factory Defaults button RF coaxial F-connector Power plug Power switch ON/OFF User ManualF@ST 3686 V2.2
Page 23. Connecting the F@ST3284 Gateway to Your Computer Installation Procedure for Ethernet Interface Follow the steps below for proper installation: 1. Make sure your computer meets the system requirements. 2. Connect a coaxial cable to the wall plug 3. Connect a coaxial cable to the CABLE connector on the F@ST3686 and screw it at the bottom manually (do not force). Note: To speed up the registration process of F@ST3686 , the coaxial cable should be connected to the gateway prior to the power connector. 4. Connect the RJ45 Ethernet cable to the ETHERNET connector on the gateway, connect the other end with the 10/100/1000BaseT Ethernet port on your computer. 5. Plug the RJ11 telephone cord(s) to the TEL 1 or TEL2 connector (s) of the cable modem. (Plug the RJ11 telephone cord(s) to the PSTN connector on the modem, connect to the PSTN service provider. This step is for EMTA with PSTN model only.) 6. Plug the power supply unit into the POWER connector of the modem. 7. Plug the other end of the power supply unit into a power outlet. 8. Power ON the F@ST3686 by pressing the ON/OFF button on the rear panel of the F@ST3686. 9. The cable gateway will look for the proper cable modem signal in the Cable Television network and process the initial registration. The cable gateway is ready for data transfer after the LED “INTERNET” is in solid white. The gateway is ready to make a phone call after the LED “Tel1” or “Tel2” is in solid white. Note: The RESET button at the rear panel is for maintenance purpose only. The screen of the coaxial cable is intended to be connected to earth in the building installation Cable splitter
Download:
Mirror Download [FCC.gov]
Document ID3699660
Application IDjeotJvOeXYBPu8i76EFY+Q==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize89.1kB (1113790 bits)
Date Submitted2018-01-02 00:00:00
Date Available2018-01-02 00:00:00
Creation Date2014-06-26 14:26:23
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2018-01-02 09:49:31
Document TitleMicrosoft Word - FAST3284_QuickUserGuide_V2_Tricom.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: G132252
FCC ID Filing: VW3FAST3686

Navigation menu