SAGEMCOM BROANDS FAST4350 WIRELESS XDSL ROUTER User Manual

SAGEMCOM SAS WIRELESS XDSL ROUTER

a href="https://usermanual.wiki/SAGEMCOM-BROANDS" itemprop="url"> SAGEMCOM BROANDS >

User manual

  Safety and Certifications   Ref : 253584089  09/01/2014  1  Important Information about the Sagemcom FAST4350:  Installation and Safe Usage Instructions: 1. Place the VDSL router in a vertical orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter.  The FAST4350 router requires the use of  a  12  VDC,  2000  mA  power  adapter.    Only  use  a  manufacturer  supplied  and  approved  power adapter. 3. Connect the FAST4350 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network). 4. Connect the Ethernet cable (provided) to one of the RJ45 ports on the VDSL Router labeled "LAN1", "LAN2", "LAN3", or "LAN4".  Then connect the other end of the Ethernet Cable to the Ethernet port of a computer.  Repeat as necessary for the other available Ethernet ports. 5. For an Ethernet WAN configuration, connect the RJ45 port labeled “WAN” to the connection provided by your ISP.   6. For a VDSL configuration, connect the provided DSL Cable to the port on the VDSL Router labeled "DSL".  Connect the other end of the DSL Cable to a standard Phone Jack.    CAUTION: To reduce the risk of fire, always and only use a UL Listed or CSA Certified Telecommunication Line Cord (DSL cable) with a minimum wire gauge of 26AWG (0.4 mm dia. minimum, or 0.129 mm² minimum) or larger (e.g., 24AWG).  When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:  1.  Do not use this product near water and avoid contact with moisture.  For example, do not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a  wet basement, or near a swimming pool.  Care should be taken so that liquids are not spilled on this equipment. 2.  This equipment is for indoor use only, do not place or install in an outdoor location. 3.  Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. 4.  This  equipment  should  only  be  operated  from  the  type  of  power  supply  (Voltage  and  Current) indicated on the marking label.   5.  Do not overload wall outlets or extension cords.  Doing so can result in the risk of fire or electrical shock. 6.  Avoid blocking any vent openings or exhaust exits on this equipment.  Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. 7.  The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. 8.  Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by items placed upon or next to it. 9.  Unplug this equipment before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning only. 10.  This equipment is  not user serviceable and  is  to  be  serviced by qualified  personnel only.   Do not disassemble this equipment.  If service is required, disconnect all power and phones lines from the equipment and consult qualified service personnel. 11.  To disconnect this equipment from AC power, unplug the power supply from the AC wall socket.   12.  Avoid  using  a  telephone  (other  than  a  cordless  type)  during  an  electrical storm.  There may  be  a remote risk of electric shock from lightning. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. 14.  Connect only to in house equipment (SELV interface).         Save these Instructions!
Download:
Mirror Download [FCC.gov]
Document ID2220619
Application IDdQcCPeGhv5fjlcC15V0qQQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.55kB (131852 bits)
Date Submitted2014-03-20 00:00:00
Date Available2014-03-20 00:00:00
Creation Date2017-10-23 13:17:27
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-23 13:17:27
Document TitleImportant Information about the Sagemcom F@ST 1704:
Document CreatorMicrosoft® Word 2010
Document Author: Anthony Reuche
FCC ID Filing: VW3FAST4350

Navigation menu