SENA TECHNOLOGIES SP08 MOTORCYCLE BLUETOOTH HEADSET & INTERCOM User Manual Manual eng SMH10R v1 0 1 0 0x

Sena Technologies,Inc. MOTORCYCLE BLUETOOTH HEADSET & INTERCOM Manual eng SMH10R v1 0 1 0 0x

UserManual.wiki >

SENA TECHNOLOGIES >

SP08 User Manual

User Manual

| SMH10R 2 © 1998-2012 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™, SMH10R™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.

| SMH10R 4 BATTERY INFORMATION MAINTENANCE AND CARE DISPOSAL CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WAIVER AND GENERAL RELEASE Two-Year Limited Warranty Limitation of Liability Return for Full Refund WARNING

| SMH10R 6 2. PACKAGE CONTENTS Headset Main Unit (+) Button / (-) Button  Volume adjustment  Navigate through configuration menu  Track-forward and track-back Center Button  Answer and end a mobile phone call  Reject an incoming mobile phone call  Start and end intercom conversation  Play and pause Bluetooth stereo device  Enter into intercom pairing mode  Enter into voice configuration setting DC Power Charging & Firmware Upgrade Port  Speaker Connector (4 pin female type)  Battery Pack Connector (2 pin male type)  Microphone Connector (2 pin female type)

| SMH10R 7  Speakers  Attachable Boom Microphone  Wired Microphone  Battery Pack  Speaker Pad  Attachable Boom Microphone Holder  Velcro Pad for Boom Microphone  Velcro Pad for Speaker  Velcro Pad for Boom Microphone Holder  Velcro Pad for Wired Microphone  Velcro Pads for Battery Pack  Mounting Cradle  Microphone Sponge  USB Power & Data Cable 3. INSTALLING THE SMH10R ON YOUR HELMET To securely install the SMH10R on the helmet, please follow the procedure. 1 Locate a proper surface on the helmet to attach the Mounting Cradle, clean the helmet surface location with a moistened towel, and allow to drying thoroughly. 2 Adhere with double sided tape on the back side of the Mounting Cradle to the surface on the helmet. 3 Clamp the SMH10R main unit to the Mounting Cradle. 4 Place the helmet speakers along with the Velcro pads, centered to your ear, in the ear pockets of the helmet. If the helmet has deep ear pockets, you can you the speaker pads to place the speakers closer to your ears. Connect it to the 4 pin speaker connector of the SMH10R main unit. 5 There are 2 different type of microphone can be installed to your helmet. In case of the Attachable Boom Microphone, place the Velcro end of the boom microphone between the internal helmet cheek pad and the internal wall of the helmet shell. The Attachable boom microphone should be mounted so it is facing close to your mouth when you wear the helmet. In the case of the Wired Microphone, attach the enclosed Velcro pad for wired microphone to the inside of the chin guard for full-face helmets. Place the wired microphone on the Velcro pad and connect it to the 2 pin connector of the SMH10R main unit. 6 Place the battery on the helmet and we recommend rear side of the helmet with Velcro, connect it to the 2 pin battery connector of the SMH10R main unit.

| SMH10R 8 4. POWERING ON/OFF AND CHARGING To power on and off the headset, press the Center Button and the + Button at the same time for about 1 second to power on, and you will get quick on-and-off convenience. 4.1 Powering On Press the Center Button and the + Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps. 4.2 Powering Off Just short press the Center Button and the + Button simultaneously, you don’t need to press and hold for a few seconds. The red LED turns on for a while until it turns off completely and you will hear descending beeps. 4.3 Charging The LED turns on red while charging, and turns to blue when the headset is fully charged. It takes about 3.5 hours to be completely charged. 4.4 Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps and a voice prompt saying “Low Battery”. 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 4.5.2 Voice Prompt Indicator When you power on the headset, keep pressing the Center Button and the (+) Button simultaneously for about 3 seconds until you hear high tone triple beeps. Then you will hear voice prompt indicating the battery level. However, if you release the buttons as soon as the headset turns on, you will not hear the voice prompt of battery level indication. 5. Volume Adjustment You can easily adjust the volume by pressing the (+) Button or the (-) Button. You will hear a beep when the volume reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source.

| SMH10R 9 6. SMH10R CONFIGURATION SETTING You can set the configuration of the SMH10R by the voice menu instruction as below. 1 To enter into voice configuration menu, press and hold the Center Button for 10 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2 Press the (+) Button or (-) Button to navigate between the menus. You will hear voice prompts for each menu items as below. 3 You can enable the feature or execute the command by press the Center Button, or disable the feature by press the Center Button again. If any button is not pressed within 10 seconds, the SMH10R will exit the configuration and goes back to stand-by. 4 If you want to exit the configuration immediately, press the (+) Button or (-) Button and hold it until you hear a voice prompt, “Exit configuration”, and press the Center Button. The voice prompt for each menu item is as below: (1) Phone pairing (2) Multipoint pairing (3) Phone selective pairing (4) Media Selective pairing (5) VOX phone (6) VOX intercom (7) VOX sensitivity (8) Voice prompt (9) Delete all pairings (10) Factory reset (11) Exit configuration 6.1 Mobile Phone Pairing Voice Prompt “Phone pairing” Factory Default N/A Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “Phone pairing” to select a phone pairing menu. If this menu is selected, the SMH10R will enter phone pairing mode for your mobile phone. Please refer to the section 7.1 for details on mobile phone pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation. 6.2 Multipoint Pairing Voice Prompt “Multipoint pairing” Factory Default N/A Enable / Disable Press the Center Button

| SMH10R 10 Press the (+) Button or the (-) Button until you hear a voice prompt, “Multipoint pairing” to select a multipoint pairing menu. If this function is selected, the SMH10R will enter multipoint pairing mode for your mobile phone or Bluetooth devices such as MP3 and GPS. Please refer to the section 7.1 or 7.3 for details on multipoint pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation. 6.3 Phone Selective Pairing Voice Prompt “Phone selective pairing” Factory Default N/A Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “Phone selective pairing” to select a phone selective pairing menu. If this function is selected, the SMH10R will start phone selective pairing. Please refer to the section 8 for details on phone selective pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation. 6.4 Media Selective Pairing Voice Prompt “Media selective pairing” Factory Default N/A Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “Media selective pairing” to select a media selective pairing menu. If this function is selected, the SMH10R will start media selective pairing. Please refer to the section 8 for details on media selective pairing. If you press the (+) or (-) Button for menu navigation, it will stop the pairing operation. 6.5 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “VOX Phone”. If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough, unless you are connected to intercom. For example, when you hear a series of beeps for an incoming call, you can answer the phone by saying “Hello” or any other word loudly. However, the phone VOX feature does not work if you are connected to intercom. This is enabled from the factory but you can disable this. If this mode is disabled, you have to press the Center Button to answer an incoming call.

| SMH10R 11 6.6 Enabling/Disabling Voice Activated Intercom Voice Prompt “VOX intercom” Factory Default Disable Enable / Disable Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “VOX intercom”. If this feature is enabled, you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough. The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by press the Center Button, you have to terminate the intercom conversation manually. However, even when this feature is enabled, if you terminate intercom conversation manually with the Center Button, you are not able to start intercom by voice temporarily. In this case, you have to press the Center Button to restart the intercom. This is to prevent repeated unintentional intercom connections by strong wind noise. If you press the Center Button to start an intercom conversation, it is not terminated by 20 seconds of silence. After turning SMH10R off and on, you can start intercom by voice again. 6.7 Setting VOX Sensitivity Voice Prompt “VOX sensitivity (value)” Factory Default 3 Value Adjustment Press (+) or (-) Button Value Save Press the Center Button Press the (+) Button or the (-) Button until you hear a voice prompt, “VOX sensitivity (value)”. If you enter the mode, you will hear a prompt saying the current VOX sensitivity value. To press the Center Button will lead you to value adjustment mode. You may adjust the VOX sensitivity value by pressing (+) or (-) Button. The value of 5 is the highest sensitivity set-up and 1, the lowest one. After you completed the setting, press Center Button to apply the changes. 6.8 Enabling/Disabling Voice Prompts Voice Prompt “Voice prompt” Factory Default Enable Enable / Disable Press the Center Button

| SMH10R 12 You can disable voice prompts by configuration setting, but the following voice prompts are always on. - Voice prompts for configuration setting menu - Voice prompts for battery level Indicator - Voice prompts for factory reset 6.9 Delete All Bluetooth Pairing Information Voice Prompt “Delete all pairings” Factory Default N/A Execute Press the Center Button To delete all Bluetooth pairing information of the SMH10R, press the (+) Button or the (-) Button until you hear a voice prompt, “Delete all pairings”, and press the Center Button to confirm. 6.10 Reset to Factory Default Setting Voice Prompt “Factory Reset” Factory Default N/A Execute Press the Center Button To restore factory default setting of the SMH10R, press the (+) Button or the (-) Button until you hear a voice prompt, “Factory reset”, and press the Center Button to confirm then SMH10R will power off with a voice prompt saying “Headset reset, good-bye”. 6.11 Exit Voice Configuration Menu Voice Prompt “Exit configuration” Factory Default N/A Execute Press the Center Button To exit voice configuration menu and get back to stand-by mode, press the (+) Button or (-) Button until you hear a voice prompt, “Exit configuration”, and press the Center Button to confirm. Press (+) Button or (-) Button Press Center Button Phone Pairing None Multipoint Pairing None Phone Selective Pairing None Media Selective Pairing None VOX Phone Enable / Disable

| SMH10R 16 9. Intercom Pairing 9.1 Pairing with Other SMH10R Headsets for Intercom Conversation The SMH10R can be paired with up to three other headsets for Bluetooth intercom conversation. 1 Turn on the two SMH10R headsets (A and B) that you would like to pair with each other. 2 Press and hold the Center Button for 5 seconds, then you will hear mid-tone single beep and a voice prompt saying “Intercom pairing” 3 Simply press the Center Button of any one of the two headsets A or B (It doesn’t matter that you choose A or B.) and wait until the LEDs of both headsets turn to blue and intercom connection is automatically established. The two SMH10R headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the SMH10R will return to stand-by mode. Pairing A & B 4. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. Pairing A & C Pairing A & D 5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second intercom friend, and third intercom friend. Note: For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A.

| SMH10R 18 - Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the headset. - Press the Center Button in stand-by mode to activate the voice dialing of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further instruction. - To redial the last number, press the (+) button for 3” in stand-by mode. You will hear a voice prompt saying “Last number redial”. Mobile Phone Call Button Operations Answer Press the Center Button or Say “Hello” End Press the Center Button for 2” Reject Press the Center Button for 2” Transfer Must be done on the mobile phone Call Use phone keypad Redial Press the (+) button for 3” Voice Command Press the Center Button for 3” Note: 1. If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during the phone call. 13. TWO-WAY INTERCOM 13.1 Start and End Two-way Intercom 1. You can start an intercom conversation with one of any intercom friends by press the Center Button: press once to intercom with the first intercom friend, press twice with the second intercom friend, and press three times with the third intercom friend. 2. To terminate an intercom conversation, press once the Center Button. Any intercom connection with any intercom friend will be terminated by press the Center Button. A twice or three times of press will do nothing in this case. 1st intercom friend 2nd intercom friend 3rd intercom friend Start intercom Press once Press twice Press three times End intercom Press once Press once Press once Start & End Two-way Intercom 13.2 Intercom and Mobile Phone Call 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. a To answer the phone call and stop the intercom conversation, Press the Center Button once.. The phone VOX feature does not work if you are connected to intercom. When you hang up the phone call, the intercom will automatically be recovered.

| SMH10R 19 b To reject the phone call and stay on the intercom conversation, press the Center button for 2 seconds until you hear a beep. Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation by an incoming mobile call. 2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you that there is an incoming intercom call. You will also hear a voice prompt saying “Intercom requested”. In this case, the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You have to hang up the mobile phone call to make or receive an intercom call. 13.3 Intercom and GPS If you pair a Bluetooth GPS to the SMH10R as described in 6.3 of this user's guide, you can hear the turn-by-turn voice instruction of the GPS while having an intercom conversation. The GPS voice instruction interrupts intercom conversation, but it is automatically reestablished after the GPS voice instruction ends. 13.4 Intercom and Two-way Radio As described in 6.4 of this user's guide, you can use a two-way radio and SMH10R Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way Radio Adapter, along with the SMH10R. Incoming audio from the two-way radio is not interrupting an intercom conversation but is heard in background. This is useful when you have an intercom conversation with a passenger on the back seat and use a two-way radio for group communication with other motorcycle riders. 14. THREE-WAY CONFERENCE INTERCOM 14.1 Start Three-way Intercom You (A) can have a three-way conference intercom with two other SMH10 friends (B & C) by establishing two intercom connections at the same time. While a three-way conference intercom is in progress, mobile phone connection of all three participants would be temporarily disconnected, but as soon as the conference intercom terminates or one of the participants leaves the intercom, all mobile phones would be automatically reconnected. During the conference intercom, if you have an incoming mobile phone call, terminate the conference intercom to automatically reconnect the mobile phone and receive the call. 1 You (A) need to be paired with two other friends (B & C) for three-way conference intercom.

| SMH10R 20 2 Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). 3 The second intercom friend (C) may join the intercom by making an intercom call to you (A). 4 Now you (A) and two SMH10 intercom friends (B & C) are having a three-way conference intercom. 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1 Press the Center Button for 1 second until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2 Press once or twice the Center Button to disconnect intercom connection with one of the two intercom friends accordingly. For example, by Press the Center Button once, you can just terminate the intercom connection with the first intercom friend (B). However, you still have the intercom connection with your second intercom friend (C). Center Button Result Press for 1” Disconnect (B) & (C) Press once Disconnect (B) Press twice Disconnect (C) End Three-way Intercom

| SMH10R 21 15. FOUR-WAY CONFERENCE INTERCOM 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SMH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A). 15.2 End Four-way Intercom As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1 Press the Center Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the intercom connections between you (A), and your intercom friends (B) and (C). 2 Press once or twice the Center Button to disconnect the intercom connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by Press the Center Button twice, you will be disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C). Center Button Result Press for 1” Disconnect (B), (C) & (D) Press once Disconnect (B) Press twice Disconnect (C) & (D) End Four-way Intercom 16. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT You can have a three-way conference phone call by adding an intercom friend to the mobile phone conversation. While having a mobile phone call, make an intercom call to one of the intercom friends by press the Center Button to form a three-way conference call with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone call, terminate the intercom by press the Center Button. To end the mobile phone call first and maintain the intercom conversation, press the Center Button for 2 seconds, or wait for the person on the mobile phone line to end the call.

| SMH10R 22 Start Press the Center Button while having a mobile phone call End intercom first Press the Center Button End phone call first Press the Center Button for 2” or Wait for the called person to end the call Start & End Three-way Conference Phone Call 17. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later. 18. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the SMH10R automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection, press the Center Button to stop the attempt. 19. FAULT RESET When the SMH10R is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SMH10R will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 20. FIRMWARE UPGRADE The SMH10R supports firmware upgrade function. Please visit Sena Bluetooth web site at www.senabluetooth.comto check the latest software downloads.

| SMH10R 23 21. CASE STUDY Case 1 ● iPhone for mobile phone call and stereo music streaming ● Zumo 550 or Zumo 220 for GPS voice instruction ● SMH10R for two-way intercom Case 2 ● iPhone for mobile phone call and stereo music streaming ● Zumo 660/665 for GPS voice instruction ● SMH10R for two-way intercom Case 3 ● iPhone for mobile phone call via Zumo 660/665 ● Zumo 660/665 for GPS voice instruction and stereo music streaming ● SMH10R for two-way intercom Case 4 ● Feature phone for mobile phone call ● iPod Touch for stereo music streaming ● Two other SMH10s for three-way conference intercom Case 5 ● iPhone for mobile phone call ● iPod Touch for stereo music streaming ● TomTom Rider2 for GPS voice instruction ● SMH10R for two-way intercom Case 6 ● iPhone for mobile phone call and stereo music streaming ● Sena SR10 for two-way radio, GPS voice instruction, and radar detector alarm ● SMH10R for two-way intercom

| SMH10R 24 BATTERY INFORMATION The SMH10R has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. Always try to keep the battery between 15°C and 25°C(59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Never use any charger that is damaged. Operating times are estimates only and depend on the devices used together, features used, battery age and condition, temperatures to which battery is exposed, and many other factors. MAINTENANCE AND CARE The SHM10R should be treated with care and the following suggestions will help you protect your warranty coverage. 1 Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2 Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and wrap or melt certain plastics. 3 Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. 4 Do not attempt to open the SMH10R 5 Do not drop or knock the device. Rough handling can break internal circuit boards and fine mechanics. 6 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. 7 Do not paint the device. Paint can clog the moving parts and prevent proper operation. These suggestions apply equally to the headset main unit, speaker-microphone clamp unit, or power charger. DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point for recycling.

| SMH10R 25 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ● This device may not cause harmful interference. ● This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.senabluetooth.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, UnitedKingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

$| SMH10R 26 Bluetooth License The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners The SMH10R is compliant with and adopts the Bluetooth® Specification version 3.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed. WAIVER AND GENERAL RELEASE By using the SMH10R you waive all substantial legal rights including the right to sue. Please read the following carefully before using the device. If you do not accept all terms of this agreement, you should immediately return the product for a full refund. By using the headset you agree to be bound to this agreement and forfeit the right to sue. Using a communication device while riding a motorcycle, scooter, moped, ATV, quad-bike or any other vehicle or equipment, whether on land, water or air (jointly referred to as “Vehicle”) requires your complete and undivided attention. Sena Technologies, Inc., including its Officers, Directors, Affiliates, Parent Company, Representatives, Agents, Contractors, Sponsors, Employees, Suppliers and Resellers (jointly referred to as the “Company” or “Sena”) strongly advise you to take all necessary precautions and remain alert to the traffic, weather and road conditions if you choose to use the SMH10R headset, including all derivative models irrespective of its commercial name or branding (the “Device”), and stop your Vehicle on the roadside prior to initiating or receiving calls. Any publications, advertisements, announcements or similar notes that refer to using the Device while riding a Vehicle are solely intended to address its technical capabilities and should not be misconstrued as if encouraging users to operate the Device while actively involved in traffic. By way of purchasing this Device and not returning it for a full refund (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorney’s fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Device under any circumstances or conditions and irrespective of jurisdiction. Sena will not be responsible for any physical damages, irrespective of reasons, conditions or circumstances, including malfunctioning of the Device, and all risks associated with operating it rest solely and entirely with the user of this Device, irrespective of whether the Device is used by the original purchaser or any third party. Sena hereby notifies you that using this Device may also be in contravention to local, federal, state or national laws or regulations, and that any use of the Device is entirely at your sole risk and responsibility. 1 You, your heirs, legal representatives, successors or assigns, hereby voluntarily and forever release, discharge, indemnify and hold harmless Sena from any and all litigation, claims, debts, demands, actions and liability which may arise, directly or indirectly, from using the Device for any distress, pain, suffering, discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. 2 You fully understand and assume the risks in using the Device, including risk of negligent acts or omissions by others. 3 You confirm that you are physically capable to use the Device and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner. You confirm that you are at least eighteen (18) years of age and that you have been advised of the risks associated with the use of the Device. You further confirm that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Device. 4 You fully acknowledge our warnings and understand that: (a) risks and dangers exist in using the Device while in traffic, including but not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability; (b) these risks and dangers may be caused by the negligence of the manufacturers or its agents or any third party involved in designing or manufacturing the Device; (c) these risks and$

SENA TECHNOLOGIES SP08 MOTORCYCLE BLUETOOTH HEADSET & INTERCOM User Manual Manual eng SMH10R v1 0 1 0 0x

Sena Technologies,Inc. MOTORCYCLE BLUETOOTH HEADSET & INTERCOM Manual eng SMH10R v1 0 1 0 0x

User Manual

Navigation menu

Namespaces

Views

Navigation