SENA TECHNOLOGIES SP15 Bluetooth Action Camera User Manual Manual PRISM v1 0 eng

Download:
Mirror Download [FCC.gov]
Document ID	2350972
Application ID	LqvvsuixcUzcP/Clv2LKjQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	192.81kB (2410082 bits)
Date Submitted	2014-08-07 00:00:00
Date Available	2015-02-03 00:00:00
Creation Date	2017-10-21 16:35:39
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 16:35:39
Document Title	Microsoft Word - Manual_PRISM-v1.0.doc (eng)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

| PR
RISM
PRISM
Bluetooth
h® Action
n Camerra
SENA
www
w.sena.co
om
User’s G
Guide
| PR
RISM
CON
N TEN TS
1.. PACKAGE CONTENTS
2.. ACCESSOR
RIES
3.. GETTING S
STARTED
3.1. Open
ning and Clossing the Back
k Door
3.2. Memo
ory Card (no
ot included in the package
e)
3.3. Battery
3.4. Powe
ering On and Off
3.5. Came
era LCD Men
nu Screen
3.6. Voice
e Prompt
4.. CAMERA M
MODES AND
D MENU SYS
STEM
4.1. Button Operationss
4.2. Came
era Modes
5.. VIDEO MODE
5.1. Video
o Mode Operrations
5.2. Video
o Mode Settin
ngs
5.3. Video
o Recording Time
6.. SINGLE SH
HOT MODE
6.1. Single
e Shot Mode
e Operations
6.2. Single
e Shot Mode
e Settings
7.. BURST SHOT MODE
7.1. Burst Shot Mode Operations
7.2. Burst Shot Mode Settings
8.. TIMELAPSE MODE**
8.1. Timellapse Mode Operations
9.. PLAYBACK
K*
9.1. Video
os and Photo
os (TV OUT, HDMI)*
9.2. Playb
back on Sena
a LCD Pack™
™ (sold sepa
arately)
10
0. CAMERA SETTINGS**
10.1. Cam
mera Settingss Operations
10.2. Reco
ording Settin
ngs *
10.2.1
1. Internal Miic Gain *
10.2.2
2. Upside Do
own *
10.2.3
3. Date Caption *
10.3. Blue
etooth Setting
gs *
10.3.1
1. Bluetooth Pairing *
10.3.2
2. Bluetooth Mic. Gain *
| PR
RISM
10.3.3
3. Sidetone *
10.3.4
4. Ultra HD Voice
Record
ding *
10.4. Device Setting *
10.4.1
1. Auto powe
er off *
10.4.2
2. Beep *
10.4.3
3. LED *
10.4.4
4. TV out (NT
TSC / PAL) *
10.4.5
5. Time set *
10.4.6
6. Factory Re
eset *
10.4.7
7. Device info
o*
10.4.8
8. SD Card Formatting
1. BLUETOO
OTH AUDIO RECORDING
11
11.1. Settings of Bluettooth Audio Recording
11.2. Blue
etooth Audio Recording with
w Sena He
eadsets
11.2.1
1. Bluetooth Pairing
11.2.2
2. Bluetooth Connection
11.3. Blue
etooth Audio Recording with
w Non-Sen
na Headsets
11.3.1
1. Bluetooth Pairing
11.3.2
2. Bluetooth Connection
12
2. Bluetooth Remote Con
ntrol
12.1. Rem
mote Control by Sena Hea
adsets
12.1.1
1. Jog Dial Tyype Products
12.1.2
2. Three-buttton Type Pro
oducts
12.2. Rem
mote Control by Non-Sena Headsets
13
3. CAMERA CONNECTION
13.1. Connecting to a Windows PC
C by USB Ca
able
13.2. Connecting to a Mac by USB
B Cable
13.3. Connecting the Camera
to a TV
14
4. CAMERA HOUSING
15
5. CAMERA MOUNTING
15.1. QRM
M™ (Quick Release
Mou
unt) System ffor Motorcycle
15.2. Side
e Clamp Mou
unt
15.2.1
1. Side Clam
mp Mount Com
mponents
15.2.2
2. Side Clam
mp Mount Insttallation
15.3. QRM
M Top Surfacce Mount
15.3.1
1. QRM Top Surface Mou
unt Compone
ents
15.3.2
2. QRM Top Surface Mou
unt Installatio
on
15.4. QRM
M Dual Suction Cup Mount
| PR
RISM
15.4.1
1. QRM Duall Suction Cup
p Mount Com
mponents
15.4.2
2. QRM Duall Suction Cup
p Mount Insttallation
15.5. QRM
M Handlebarr Mounting
15.5.1
1. QRM Hand
dlebar Mounting Compon
nents
15.5.2
2. QRM Hand
dlebar Mounting Installattion
6. CAMERA SOFTWARE
16
16.1. PRIS
SM Device Manager
16.2. PRIS
SM Smartphone App
17
7. CAMERA SPECIFICA
ATIONS
| PR
RISM
FCC Complianc
ce Informattion
This eq
quipment has been tested and
a found to comply
with the
e limits for a Class
A digital device, pursuuant
to part 15 of the FCC
C Rules.
These limits are de
esigned to provide reason
nable protectiion against harmful
interfe
erence when the equipme
ent is operate
ed in a
ercial environment. This eq
quipment generates, uses, and can radiate radio freq
quency energyy and, if not installed and used
in
comme
accord
dance with the
e instruction manual,
may cause harmfu
ul interference
e to radio com
mmunications. Operation off this equipme
ent in a
residen
ntial area is liikely to cause
e harmful interference in w
which case the
e user will be required to ccorrect the inte
erference at his
h own
expens
se.
This de
evice complies with Part 15
5 of FCC Rules
s. Operation iss subject to the following tw
wo conditions:
(1) the
e device may not cause intterference, an
nd (2) the devvice must acc
cept any interference, incluuding interfere
ence that mayy cause
undesiired operation of this device
e.
ORTANT NO
OTE:
IMPO
FCC RF Radiatiion Exposu
ure Statement:
This equipment com
mplies with FC
CC RF radiatio
on exposure l imits set forth
h for an uncon
ntrolled enviroonment. This equipment
sho
ould be
ed and operate
ed with a miniimum distance
e of 20 centim
meters between the radiator and your bod y. This transm
mitter must nott be coinstalle
located
d or operating in conjunction
n with any oth
her antenna orr transmitter.
NOTE
E: THE GR
RANTEE IS NOT
RESPO
ONSIBLE FO
OR ANY CH
HANGES OR
R MODIFIC
CA
TION
NS NOT EXP
PRESSLY APPROVED BY
B THE PA
ARTY RESPO
ONSIBLE FOR COMPL
LIA
NCE. SUCH MO
ODIFICATIO
ONS COULD
D VOID THE
E USER’S AUTHORITY
Y TO
RATE THE E
EQUIPMEN
NT.
OPER
“This device com
mplies with Industry Ca
anada licenc
ce-exempt RSS
standa
ard(s). Operaation is subje
ect to the folllowing
onditions: (1) this device
e may not ca
ause interferrence, and (2)
( this devic
ce must acce
cept any interference, inccluding
two co
interfe
erence that m
may cause un
ndesired ope
eration of the
e device.”
| PR
RISM
1 . PACKAG
GE CON TEN
TS
Status LED
Mod
de Button
Shot Button
Statu
us LCD
Micropho
one
●
Waterproof
Housing
●
●
Li-Ion
Recha
argeable Batttery
●
Helmet
Clam
mp Kit
●
QRM
System
m for Motorc
cycles
●
USB
Power & Data Cablle
| PR
RISM
●
●
Lens
Cap
●
Cigar
Jack C
Charger
| PR
RISM
2 . ACCESS
SORI ES
QRM Sysstem for
Motorccycles
QRM S
Surface Mou
unt
Dual Suction
n Mount Kit
Handle
ebar Mount Kit
Flat & Curved Addhesive Moun
nts
Compositte Cable
Co
ombo Cable
Microphonne Cable
Li-Ion Rech
hargeable
Batte
ery
USB Pow
wer & Data Cable
World Wide USB
B Wall Charg
ger
3 . GETTI
N G STAR
RTED
k D oor
3 .1 . Ope n in g a n d Closin g t he Ba ck
1. Slid
de the small lock near the
e bottom of the back doo
or to the left.
Helmet Cllamp Kit
| PR
RISM
de the back d
door of the ca
amera upwa
ards and unh inge the bac
ck door.
2. Slid
he camera, ro
otate the bacck door so th
hat it is firmly against the camera.
3. To close the back door of th
de the back d
door downwa
ards so that the
t top portio
on locks into place.
4. Slid
5. Slid
de the small lock near the
e bottom to the right to co
omplete lock
king the back
k door on thee camera.
Ca r d (not inccluded in the package)
3 .2 . M e m or y C
1. Inse
ert a memoryy card into th
he SD card slot
s and push
h down until iti clicks.
2. To remove the card, push on
o the SD ca
ard until you
u hear a click
k. The card slot
s is springg loaded and
d the card wiill slide
t slot.
from the
Note:
The camera
is co
ompatible with
Micro SD
D, SDHC orr SDXC carrds up to 32
2GB. We reecommend Class
10 carrds for
record
ding HD vide
eo and system
m stability.
3 .3 . Ba t t e r y
1. Inse
ert the batterry into the ca
amera until it locks into pllace then clo
ose the back door of the ccamera.
move the batttery lock by placing yourr thumb in th
he indentation
n and sliding
g it to the righht. Allow the battery to po
op out.
2. Rem
| PR
RISM
e battery icon displayed in the camera’s LCD wil l flash when the battery drops below
w 10%. If rec
cording is occcurring
3. The
when battery reacches 0%, the camera will save the file
e and power off.
battery, conn
nect the cam
mera to a com
mputer or US
SB power su
upply (such aas the wall charger
or cig
garette
4. To charge the b
D shows solid
d red while th
he battery is charging, an
nd it will turn off when thee battery is fu
ully charged..
charger). The LCD
Note:
You can
c use all the function off the camera while charg ing the batte
ery.
3 .4 . Pow e r in g On a nd O ff
Function
Button
Duration
LE
ED
Camera LCD
Powe
er On
Shot Button
+ Mode
e Button
1 sec
Last mode’’s color
LLast mode
Powe
er Off
Shot Button
+ Mode
e Button
1 sec
Off
Off
Off
Off
Auto Power Off
Note:
If you keep the camera not ope
erated or in standby
mod
de in 5 minuttes, it automa
atically poweers off.
CD M e nu Scr
S een
3 .5 . Ca m e r a LC
1. Batttery life
2. Res
solution / fpss
3. Cou
unter
4. Cam
mera mode
5. Bluetooth
6. Memory
Pr om
m pt
3 .6 . Voice
10
| PR
RISM
with Bluetoo
oth headset, you can be guided by voice
prompts. The voicee prompts wiill help you audibly
If you are paired w
a in and the
e operation yyou have pe
erformed while operatingg the camera
a. For the details of
underrstand which mode you are
how to
o pair the camera with Blluetooth headset, please
e refer to the section, “10.3 Bluetooth Settings”.
4 . CAM
ERA
A M OD ES
E AN D M EN U SYSTEM
pe r a t ion s
4 .1 . Bu t t on Op
Button
Press
Press and hold
Mode
e Button
Change ca
amera mode,, go to the ne
ext menu item
during men
nu navigation
Enter *Quick Settinng
Exit Qu
uick Setting
Shott Button
Perform vid
deo or photo
o shot or sele
ect the menu
item
Take a photo shot during video
record
ding
Note:
ck settings iss a quick and easy way to
o enter the se
ettings menu
u for each mo
ode that you are currently
y in.
* Quic
4 .2 . Ca m e r a M ode s
The camera
has sseveral mode
es. To cycle through the modes, press the Mode
e Button. Thee Camera modes are ide
entified
by the
e LED color.
Icon
Mode
App
plication
LED Color
Viideo
Record video
Red
Siingle Shot
Capture a single pho
oto
Blue
urst Shot
Bu
Capture up to 10 pho
otos in one second
Green
Tiimelapse
Capture a series of p
photos at tim
med intervals
Cyan
*P
Playback
Playback video and photos.
???
ettings
Se
Adjust ca
amera settin
ngs
Yello
11
| PR
RISM
Note:
Playb
back mode appears only if camera is connected to
o a TV or Se
ena LCD Pac
ck™ (optionaal accessory,, sold separa
ately).
5 . VI
V D EO M OD E
5 .1 . Vide
o M od
de Ope r a t ions
Note:
12
| PR
RISM
matically stop
ps recording when the m
memory card is full or the
e battery is oout of power. Your video will be
The camera autom
saved
d before the ccamera powe
ers off.
o M od
de Se t t in g s
5 .2 . Vide
You can
c change tthe resolution
n setting at the
t video se
ettings, and the frame rattes are fixed along with certain
resolutions.
When
n you select 4
480P (120fpss) 720P (60fp
ps), you can not take a sttill shot during video recoording.
1080P
Resolution
720P
480P
30FPS (10
080P, 720P))
Frrame Rate
60FPS (72
20P)
120FPS (4
480P)
Wide (137
7°)
Fie
eld of View
Narrow (9
90°)
o Re c
cor ding Tim
me
5 .3 . Vide
w is a table off approximatte video reco
ording times tto card size in specific mode.
Below
10
080P / 30FPS
720P / 30FPS
48
80P / 120FPS
1GB
9m
min
12 min
15
5 min
2GB
18
8 min
24 min
30
0 min
4GB
36
6 min
48 min
1h
8GB
1 h 12 min
1 h 36 min
2h
16GB
2 h 24 min
3 h 12 min
4h
32GB
4 h 48 min
6 h 24 min
8h
13
| PR
RISM
6 . SI
S N GLE SH OT M OD E
6 .1 . Sin gle Sh o
ot M ode Ope
O r a t ion s
14
| PR
RISM
ot M ode S e t t in gs
6 .2 . Sin gle Sh o
You can
change the photo resolution
att the single shot setting
gs, and the aspect of raatios are fix
xed along with the
resolu
utions.
esolution
Re
Aspect of Ratio
3MP
3:2
3.2MP
4:3
3.5MP
16
6:9
5MP
16
6:9
7 . BURST
SH OT M OD E
7 .1 . Bu r st Sh o
ot M ode Op
pe r a t ions
15
| PR
RISM
ot M ode Se
e t t ings
7 .2 . Bu r st Sh o
c change th
he photo ressolution at the
e burst shot ssettings, and
d the aspect ratios are fixxed along witth the resoluttions.
You can
Resolution
As
spect Ratio
3MP
3:2
3.2M
MP
4:3
3.5M
MP
16:9
Ca
apture Rate
10/s
5/s
3/s
16
| PR
RISM
8 . TI
T M ELA
APSE M OD
O E
T e la pse
e M ode Op
pe r a t ions
8 .1 . Tim
17
| PR
RISM
18
| PR
RISM
de Se t t in gs
Tim e la pse M od
apse mode ttakes a video
o (or a series
s of photos) a
at 1, 3, 5, 10, 30 or 60 se
econd intervaals.
Timela
Type
Resolution
Video
1080P/30FPS
720P/60FPS
720P/30FPS
Photo
3.5MP (3:2)
3.2MP (4:3)
3MP (16:9)
Sequ
uence Interv
val
(좌측 병합)
병
1s
3s
5s
10s
30s
60s
9 . PLAYBA
ACK
nd photos by connecting
g the camera
ra to a TV (rrequires micro HDMI, coomposite or combo cable
e, sold
Playback video an
separately). You ccan also playyback video and
a photos o
on the Sena LCD Pack™(optional acccessory, sold
d separately)).
9 .1 . Vide
os a n d Ph ot os ( TV OUT, H D M I )
owse videos and photos:
To bro
1. Plug the camera
a into a TV/H
HDTV with a micro HDMII cable, comp
posite cable or combo caable (optiona
al accessoriess).
2. Turrn the camerra on
3. On your camera
a, select Playyback mode..
e camera sho
ows thumbna
ail previews of all videos and photos on the SD ca
ard.
4. The
19
| PR
RISM
hile in a thum
mbnail preview
w, use the Mode
Button tto cycle throu
ugh the thum
mbnails. Presss the Shot Button
to view
w.
5. Wh
6. Use
and
to navigate
e backward and
a forward tto see more media files on
o your mem
mory card.
7. Depending on whether you
u are viewing
g videos or p
erent control options will appear. Use
e the Mode Button
photos, diffe
and th
he Shot Butto
on to navigatte.
Note:
Burst photos and timelapse fiiles will display the first photo in the
e series. To view all phootos in a serries, use the
e Mode
Button
n to select view and presss the Shot Button.
9 .2 . Pla yba ck o
on Se na LCD
Pa ck ™ ( sold se p
pa r a t e ly)
e Sena LCD Pack™ follo
ows a similarr process/pro
ocedure as described witth a few sligh
ht variations.
Playback using the
he Sena LCD
D Pack™ Usser’s Guide fo
or more inforrmation.
See th
20
| PR
RISM
1 0 . CAM ER
RA SETT
TI N GS
Se t t ings Ope
O r a t ion s
1 0 .1 . Ca m e r a S
n g Se t t in g s
1 0 .2 . Re cor din
cording settin
ngs, video, single
shot, burst
shot a
and timelapse
e settings arre the samee as the quic
ck settings at
a each
In rec
mode.
21
| PR
RISM
22
| PR
RISM
1. Internal M
Mic Gain
10.2.1
You can
c adjust the internal microphone ga
ain of the ca
amera. If the
e gain is high
h, then the ccamera will acquire
more
e audio
from the
t micropho
one of the camera.
Factory Deffault
Auto
Level Adjusttment
Press
s the Mode B
Button
(Auto / lo
ow / middle / high / off)
Applicatio
on
Press the Shot B
Button
2. Upside Do
own
10.2.2
If you need to mo
ount the camera upside down
and stiill wish the files to appea
ar upright, th en you need
d to turn it on
n. This
setting
g eliminates the need to flip your vide
eo or photos during editin
ng.
Facttory Default
Off
Off
Cam
mera right sid
de up
On
Cam
mera upside down
Enable
Disable
Presss the Shot Button
10.2.3
3. Date Capttion
You can
record o
or hide date caption while video reco
ording. Date caption is not
n recordedd during the video record
ding of
timela
apse.
Facttory Default
Off
Off
Hid
de date capttion
On
Reccord date cap
ption
Enable
Disable
Presss the Shot Button
1 0 .3 . Blue t oott h Se t t in gs
setttings can ma
ake the camera connect your Bluetooth headset to overlay B
Bluetooth aud
dio with vide
eo. The
The Bluetooth
camerra supports ffull control and
a setting capability for Sena Blueto
ooth headsetts, while it suupports reco
ording start/sstop for
non-S
Sena Bluetoo
oth headsets..
23
| PR
RISM
10.3.1
1. Bluetooth
h Pairing
1. Enter
the Bluetooth pairin
ng in the Blue
etooth setting
gs.
2. Set
S your Blue
etooth headsset to pairing mode.
3. The
T pairing iss completed.
10.3.2
2. Bluetooth
h Mic. Gain
You can
c adjust th
he Bluetooth microphone
e gain of the
e Bluetooth headsets
or microphonees. If the gain is high, then the
camerra will acquirre more audio from the microphone
of the Bluetoo
oth headsets
s.
24
| PR
RISM
Factory Deffault
middle
Level Adjusttment
Press
s the Mode B
Button
(middle / high / offf / low)
Applicatio
on
Press the Shot B
Button
3. Sidetone
10.3.3
When
n using a Sen
na headset, sidetone
is supported;
If this feature is enabled, you
y can hearr what you are
a speaking during
video recording.
Facttory Default
On
Enable
Disable
Presss the Shot Button
4. Ultra HD V
Voice Recorrding
10.3.4
Facttory Default
On
Off
Norm
mal voice reco
ording
On
Ultra HD
D Voice Reco
ording™
Enable
Disable
Presss the Shot Button
e Pairing Lis
st
Delete
You may
m delete alll Bluetooth pairing
list of the camera.. Then you lo
ost all your pairing devicees informatio
on.
25
| PR
RISM
1 0 .4 . D e vice S e t t in g
26
| PR
RISM
1. Auto pow er off
10.4.1
The camera
can b
be configure
ed to automa
atically powe
er off after a specific periiod of inactivvity (when no
o videos or photos
are be
eing taken an
nd no buttons have been pressed). T
This feature does
not work while chargging the cam
mera.
Factory Deffault
On
Idle Time
5 min
Applicatio
on
Press the Shot B
Button
2. Beep
10.4.2
You can
c turn off or on the beep sound of th
he camera d uring operations.
Facttory Default
On
Enable
Disable
Presss the Shot Button
10.4.3
3. LED
You can
c turn off or on the statu
us LED.
Facttory Default
On
Enable
Disable
Presss the Shot Button
4. TV out (NT
TSC / PAL)
10.4.4
The NTSC
and PA
AL settings govern video
o recording fframe rate and
a playback
k when view
wing video on
n TV/HDTV. Select
NTSC
C when viewing a TV/HDT
TV in North America.
Se
elect PAL if viewing
on a PAL TV/HDT
TV (most televisions outside of
North America) or if viewing on
n a PAL TV/H
HDTV in anyy region.
Factory Deffault
NTSC
Mode
Adjusttment
Press
s the Mode B
Button
(NTSC
/ PAL
L)
Applicatio
on
Press the Shot B
Button
27
| PR
RISM
5. Time set
10.4.5
Set th
he camera clock to ensurre video and photo files a
are saved with the correc
ct date and ttime. Time can
c be set byy Year,
Month
h, Hour, and Minute,
Month/Day/Time:
To change Year/M
10.4.6
6. Factory R
Reset
It will clear all the settings to fa
actory default.
7. Device inffo
10.4.7
era.
You can
c see the ccurrent firmware version on
o your came
8. SD Card F
Formatting
10.4.8
11. Fo
ormatting will remove alll files from a memory ccard. When using
a new
w card for thee first time, always form
mat the
memo
ory card using the camera
a.
28
| PR
RISM
1 1 . BLUET
TOOTH AUD
I O RECOR
RD I N G
t use of Bluetooth head
dsets, the ca
amera allowss users to ad
dd their voice
e to the videoo on-the-fly using
the Blu
uetooth
With the
Audio Recording™
™ feature. Being
able to
t narrate th
he video during recordin
ng not only provides us
sers a whole new
he need for follow-up
aud
dio editing prroviding real--time audio eexperiences.
experience but alsso reduces th
1 1 .1 . Se t t in gs of Blue t o ot h Audio Re cor din g
e are severa
al paramete
ers that affe
ect the overrall performance of Blu
uetooth Auddio Recordin
ng. Based on
o the
There
underrstanding of h
how they are
e correlated, you need to set up the parameters
accordingly.
etup is as folllows.
Factory Default se
Internal M
Mic Gain =Autto
Bluetooth Mic Gain =M
Middle
Voice Record
ding =On
Ultra HD V
H Voice Re
ecording™ iss provided fo
or Sena Bluettooth headse
ets ; it enable
es you to reccord your voiice in CD-quality. It
Ultra HD
is ava
ailable only w
when a singlle Sena headset is conn
nected with the
t camera. It is not suppported in co
onference inttercom
mode. When you are using a Sena heads
set, you mayy switch to Normal
Mode
e pr Noise C
Control Mode
e according to
t your
cations. If you
u use a non--Sena Blueto
ooth headsett, Normal Voice Recordin
ng Mode is thhe only mode
e that you may use.
applic
29
| PR
RISM
1 1 .2 . Blue t oott h Audio Re
R cor ding w it h Se na
a H e a dse t s
1. Bluetooth
h Pairing
11.2.1
To rec
cord your vo
oice to the camera
with Bluetooth h
headset, you should pairr the cameraa with a Blue
etooth headset (or
microp
phone). Thiss pairing operation is only
y required on
nce for each Bluetooth he
eadset. The camera will remain paire
ed with
the he
eadsets afterr the first paiiring process
s is complete
ed and autom
matically connected to th e paired hea
adsets again
n within
the co
onnection ran
nge.
Cam
mera
Setting
gs → Bluetoo
oth Settings → Bluetooth Pairing
Sena
a Headset
Intercom Pairing (Jog Dial 5 secc or Center Button
5 sec))
Statu
us LED
Camera: Bluetooth Pairing Com
mpleted?
(상단
단 셀 병합)
Headse
et: LED flash
hes blue.
Bluetooth pairing
g from the ca
amera from tthe menu operation of Se
ettings → Bluuetooth → Bluetooth Pairring.
1. Perform
2. Enter
into the
e intercom pa
airing mode of the headsset. Then the
e headset is paired autom
matically witth the camerra. You
do
d not need to press an
ny buttons fo
or pairing. F
For details on
o intercom pairing, refeer to the use
er’s guide off Sena
headset.
3. When
the headset LED flashes
blue, the pairing is completed
d. Then you will hear thee voice prom
mpt saying “P
PRISM
connected”
frrom the conn
nected Sena headset.
2. Bluetooth
h Connection
11.2.2
You can
c connect the camera with Sena headsets and
d transfer the
e conversatio
ons to the caamera by esttablishing inttercom
30
| PR
RISM
ections at the
e same time.
conne
1. Turn
on the p
paired Sena headset, and
d then the ca
amera is auto
omatically co
onnected to tthe paired he
eadsets. The
e audio
channel
betw
ween the cam
mera and the Sena headsset is open.
2. Start
recordin
ng on the cam
mera by app
propriate buttton operation
n.
You can
record in
ntercom con
nversation among two o
or three interrcom friends
s who use S
Sena headse
ets. For deta
ails on
interco
om conversa
ation, refer to
o the user’s guide
of Sena
a headset.
camera Co
onnection fo
or intercom
Dual camera Co
onnection fo
or Sound Sharing
R cor ding w it h N on - Se na H e a dse t s
1 1 .3 . Blue t oott h Audio Re
11.3.1
1. Bluetooth
h Pairing
Cam
mera
Setting
gs → Bluetoo
oth → Blueto oth Pairing
Non--Sena Headsset
HFP Pa
airing
Bluetooth pa
airing from the camera from the menu
operatiion of Settinngs → Bluettooth → Blu
uetooth
1.. Perform B
Pairing.
31
| PR
RISM
o the handsfree pairing mode
of the non-Sena headset.
Forr details on handsfree pairing,
refer to the
2.. Enter into
user’s guid
de of the corrresponding headset.
3.. If the pairing is completed, you will hear th
he voice pro
ompt saying “PRISM coonnected” fro
om the connected
nding headse
et.
correspon
Note:
If you cannot pair the non-Sen
na Bluetooth headset, dellete all pairin
ng list and pa
air the one aggain.
11.3.2
2. Bluetooth
h Connection
You can
c connect tthe camera with
w non-Sen
na headsets a
and transfer your voice to
o the cameraa.
1. Turn
on the paired non-S
Sena headse
et, and then the camera
a is automatically conneccted to the headset.
The
e audio
channel
betw
ween the cam
mera and the non-Sena h
headset is op
pen.
2. Start
recordin
ng on the cam
mera by app
propriate buttton operation
n.
Note:
You can
c open or close the au
udio channel between the
e camera an
nd the heads
set by pressiing the Pairing Button on
nce on
the ca
amera or makking a phone
e call on the headset. Ple
ease refer to the headset user’s guidee for more information.
1 2 . Blu e t o
oot h Re m ot e Con t r ol
The camera
can be handsfre
ee by the rem
mote contro l capability from
Bluetoo
oth headsetss. The wirele
ess remote control
helps to use less energy and allows for more versatile
e control thro
ough the aud
dio/video rem
mote control profile (AVR
RCP) of
Sena’s Bluetooth p
products
Con t r ol by
y Se na H e a dse t s
1 2 .1 . Re m ot e C
12.1.1
1. Jog Dial T
Type Produc
cts
Type
Button
Operation
* Pow
wer On
Ph
hone Button
Triple ta
ap
* Pow
wer Off
Ph
hone Button
Triple ta
ap
Mode
e Change
Jo
og Dial
Rotate w
while pressin
ng
Menu
u Move
Jo
og Dial
Rotate w
while pressin
ng
Menu
u Select
Jo
og Dial
Rotate w
while pressin
ng
Video Start
Jo
og Dial
Press an
nd hold for 1s
32
| PR
RISM
Video Stop
Jo
og Dial
Press an
nd hold for 1 s
Single Shot
Jo
og Dial
Press an
nd hold for 1 s
Burst Shot
Jo
og Dial
Press an
nd hold for 1 s
TIme
elapse (video
o) Start
Jo
og Dial
Press an
nd hold for 1 s
Time
elapse (video
o) Stop
Jo
og Dial
Press an
nd hold for 1 s
Still Shot
(video m
mode)
Ph
hone Button
Tap
Playb
back - Forma
at
Select
Ph
hone Button
Tap
Playb
back - Move
Conttrol Icon
Jo
og Dial
Press an
nd hold for 1 s
Playb
back - Selecct
Conttrol Icon
Jo
og Dial
Press an
nd hold for 1 s
Note:
If you powered offf the camera
a using came
era button co
ontrol, you can
c power on
n the cameraa only by using camera button.
You cannot
powerr on or off the
e camera using Bluetooth
h Remote Co
ontrol.
2. Three-buttton Type Prroducts
12.1.2
Type
Butto
on
Operatio
on
Powe
er On
(-) Button
Pre
ess and hold
d for 3 s
Powe
er Off
(-) Button
Pre
ess and hold
d for 3 s
Mode
e Change
(+) & (-) Butttons
Pre
ess and hold
d for 1 s
Menu
u Move
(+) button
Pre
ess and hold
d for 1 s
Menu
u Select
Center Butto
on
Pre
ess and hold
d for 1 s
Video Start
Center Butto
on
Pre
ess and hold
d for 1 s
Video Stop
Center Butto
on
Pre
ess and hold
d for 1 s
Single Shot
Center Butto
on
Pre
ess and hold
d for 1 s
Burst Shot
Center Butto
on
Pre
ess and hold
d for 1 s
TIme
elapse (video
o) Start
Center Butto
on
Pre
ess and hold
d for 1 s
Time
elapse (video
o) Stop
Center Butto
on
Pre
ess and hold
d for 1 s
Still Shot
(video m
mode)
Center Butto
on
Pre
ess and hold
d for 3 s
Playb
back - Forma
at Select
Center Butto
on
Pre
ess and hold
d for 3 s
33
| PR
RISM
back - Movve Control
Playb
Icon
Center Butto
on
Pre
ess and hold
d for 1 s
Playb
back - Sele
ect Control Center Butto
on
Icon
Pre
ess and hold
d for 1 s
Con t r ol by
y N on - Se n a H e a dse t s
1 2 .2 . Re m ot e C
Type
Operration
Video Start
D (or redia
Dial
al)
Video Stop
Ending
a call
Single Shot
D (or redia
Dial
al)
Burst Shot
D (or redia
Dial
al)
TIme
elapse (video
o) Start
D (or redia
Dial
al)
Time
elapse (video
o) Stop
Ending
a call
1 3 . CAM ER
RA CON N ECTI ON
and photos can
c be copied
d to a comp uter using th
he micro-USB cable provvided or—if your
computter has
Recorrded video a
an appropriate carrd reader—d
directly from the
t Micro SD
D card.
C by USB C
Ca ble
1 3 .1 . Conne ct iin g t o a W in dow s PC
1. Connect
the ccamera to yo
our PC using
g the USB ca
able. The cam
mera LCD will display a U
USB logo.
2. Your
PC’s op
perating syste
em may be setup
to ope
en new devic
ces automatic
cally, if not, oopen My Co
omputer. You
ur PC’s
operating
sysstem may be setup to ope
en connected
d devices au
utomatically, if not, open M
My Compute
er.
3. Your
PC sho
ould recognizze the came
era as a rem
movable device—look forr PRISM carrd in the list of all device
es and
open.
4. Open
the DC
CIM folder, in
nside you will find the 10
00MEDIA follder, which contains
all tthe files saved on the memory
card
by the ccamera.! If there are a ve
ery large num
mbers of files
s, there will be
b multiple foolders (100M
MEDIA, 101M
MEDIA,
etc).
5. Copy
the dessired files to your
PC.
1 3 .2 . Conne ct iin g t o a M a c by USB
B Ca ble
the ccamera to yo
our Mac using the USB ccable. The ca
amera LCD will
w display a USB logo.
1. Connect
34
| PR
RISM
Mac’s o
operating sysstem may be
e setup to op
pen new dev
vices automa
atically, if noot, open a ne
ew Finder window.
2. Your
Your
Mac’s o
operating syystem may be
b setup to o
open connec
cted devices
s automaticaally, if not, open
a new Finder
window.
3. Your
Mac sho
ould recognizze the camera as a remo
ovable device
e—look for PRISM
card iin the list of devices
and open.
4. Open
the DC
CIM folder—inside, you will
w find the 1
100MEDIA fo
older which contains
all tthe files sav
ved on the memory
card
by the ccamera! If the
ere are a very large num
mbers of files
s, there will be
b multiple foolders (100M
MEDIA, 101M
MEDIA,
etc).
5. Copy
the dessired files to your
Mac.
1 3 .3 . Conne ct iin g t h e Ca
a m e r a t o a TV
nnect it to yo
our TV using a Mini HDMI type combo
o cable (not included in th
he basic pacckage).
1. Con
2. You
u need to sett up TV Out parameter in
n Device Setttings when you
y hook it up
p with AV caable.
1 4 . CAM ER
RA H OU
USI N G
a in housing:
To secure camera
g down
1. Usiing an index finger, press down and slide the bu ckle release button to slide the latchh forward. While pressing
on the
e buckle release button with
w an index finger, use tthe thumb to
o open the bu
uckle.
2. Unh
hook the bucckle from the
e case to ope
en the backdo
oor.
3. Inse
ert the came
era into the waterproof
ho
ousing.
4. Clo
ose the backd
door and hoo
ok the buckle
e into it. Presss down on the latch firmly until the laatch clicks sh
hut.
(picturres)
move camera
a from housing:
To rem
1. Usiing an index finger, press down and slide the bu ckle release button to slide the latchh forward. While pressing
g down
on the
e buckle release button with
w an index finger, use tthe thumb to
o open the bu
uckle.
2. Unh
hook the bucckle from the
e case to ope
en the backdo
oor.
3. Rem
move the cam
mera from th
he housing.
(picturres)
Note:
●
Before using the waterproof housin
ng in a wet e
environment, ensure that it is complettely sealed.
●
Do not open the case where it wou
uld be expossed to dust or sand, and be
b sure to reemove any fo
oreign objectss from
any part o
of the case be
efore closing
g the case. F
Failure to obs
serve these precautions
ccould result in damage to
o the
35
| PR
RISM
camera.
1 5 . CAM ER
RA M OU
UN TI N G
Qu ick Re le
e a se M ou n t ) Syst e m for M ot or
o cycle
1 5 .1 . QRM ™ ( Q
The Quick
Releasse Mount™ System
provid
de fast and ssecure ways to switch the
e camera moount system on the moto
orcycle.
There
e are three different QRM
M types: Top Surface Mo
ount, Handleb
bar Mount, and
a Dual Sucction Cup Mo
ount. Once you
y set
up the
e system at a desired angle,
you ca
an then mou
unt and rele
ease the cam
mera withoutt using any screws or bolts
or
chang
ging the camera angle.
36
| PR
RISM
1 5 .2 . Side Cla m p M ou n t
37
| PR
RISM
The Side
Clamp M
Mount enable
es you to mo
ount the cam
mera at the side of your helmet. You ccan adjust the camera an
ngle by
rotatin
ng the joints. When you are
a not recorrding, you ma
ay simply separate the sllide lock from
m the clamp. This mount allows
you to
o record in th
he driver’s po
oint of view.
15.2.1
1. Side Clam
mp Mount Co
omponents
Pivo
ot
The piv
vot containss the standard 1/4’’ cam
mera mount bbolt on whic
ch you fasten the
camera
a.
The slid
de lock conta
ains a 360’ rotating joint.
Slide L
Lock
The he
elmet clamp ccan be installled at the sid
de of the helm
met. It takes in the slide lock.
Clamp
Helmet C
15.2.2
2. Side Clam
mp Mount Ins
stallation
1. In
nsert the bacckplate of the
e clamp unit between the
e internal pad
dding and ex
xternal shell oof the helmett.
2. Bring
the clam
mps togetherr and tighten them using the two scre
ews and the enclosed
alleen wrench.
3. Slide
the slide
e lock into th
he clamp untiil you hear a click.
4. Adjust
the camera angless of the slide lock and the
e pivot and lo
ock them.
5. Mount
the camera on the pivot using the
t 1/4’’ cam
mera mount bolt.
1 5 .3 . QRM Top
p Sur fa ce M oun t
The QRM
Top Surface Mount enables you
u to mount yo
our camera on
o a flat or curved surfacce such as windshield,
ga
as tank
and a helmet. You
u can adjust the camera angle by rottating the ba
all joint on the
e QRM Bodyy. When you
u are not reco
ording,
an simply separate the slide lock from
m the flat or ccurved glued
d surface mounting adaptter.
you ca
15.3.1
1. QRM Top Surface Mo
ount Compo
onents
QRM
The QRM h
head contain
ns the standard 1/4’’ cam
mera mount bolt on which you
fasten the ccamera. The
e QRM body combines w
with the QRM head.
38
| PR
RISM
The slide lo
ock can take in and lock the
t rotating bball joint.
Slide L
Lock for QRM
Flatt Glued Surfa
ace Mounting Adapter
Curv
ved Glued Su
urface Mountting
Adap
pter
The mountting adapter can
c be glued
d on a flat su rface.
The mountting adapter can
c be glued
d on a curvedd surface.
15.3.2
2. QRM Top Surface Mo
ount Installa
ation
1. Choose
the ssurface that you
y like to mount
the cam
mera on, and
d select a su
uitable glued surface mounting adaptter (flat
or
o curved).
2. Peel
off the b
back sticker of
o the mountiing adapter a
and carefully
y attach it on the surface.
3. Slide
the slide
e lock into th
he mounting adapter
untill you hear a click.
4. Adjust
the camera angle by
b rotating th
he ball joint a
and lock it.
5. Mount
the camera on the QRM head using the 1/4
4’’ camera mount
bolt.
1 5 .4 . QRM D ua
a l Su ct ion Cu p M ou n t
The QRM
Dual Su
uction Cup Mount
enable
es you to mo
ount the cam
mera on surfa
aces that reqquire some height
for reccording
such as
a windshield
d, gas tank, and trunk. You
Y can adju st the camerra angle by rotating
the w
wheel joints or
o the ball joints on
the legs. When yo
ou are not re
ecording, you
u can simplyy separate th
he suction cu
ups from thee surface, or take out the
e QRM
the QR
RM body.
head from
15.4.1
1. QRM Duall Suction Cu
up Mount Co
omponents
QRM
Th
he QRM hea
ad contains the standarrd 1/4’’ came
era mount bbolt on whic
ch you fasten the
ca
amera. The QRM
body co
ombines with
h the QRM head.
Locking
Scre
ews
39
| PR
RISM
Locking Kno
obs
Th
he suction cu
ups can be lo
ocked into po
osition by pullling the leveer.
ps
Suction Cup
Th
hese legs are
e used for du
ual suction.
Long Legss
Short Leg
Th
his leg is use
ed for single ssuction depe
ending on the
e camera anggle.
15.4.2
2. QRM Duall Suction Cu
up Mount Installation
1. Locate
a proper surface to attach the mount, cle
ean the surfface location with a moisstened towel, and allow to dry
th
horoughly.
2. Adjust
the leg
g angles by rotating
the wheel
joints a
and the ball joints of the legs.
3. Once
the leg angle is set,, place the su
uction cups o
on the surfac
ce.
4. Pull
P the leverss on the suction cups to secure suctio
on.
5. Adjust
the camera angless by rotating the
t barrel an
nd the ball joint on the body, and lockk them.
6. Mount
the camera on the QRM head using the 1/4
4’’ camera mount
bolt.
16.4.3
3. QRM Sing
gle Suction Cup
Mount Installation
1. Locate
a proper surface to attach the mount, cle
ean the surfface location with a moisstened towel, and allow to dry
th
horoughly.
2. Detach
the bo
ody from the
e legs.
3. Attach
the short leg on on
ne of the long
g legs.
4. Adjust
the leg
g angles by rotating
the wheel
joint an
nd the ball jo
oint of the leg
g.
5. Place
the sucction cup on the surface and
a pull the llever to secu
ure suction.
6. Adjust
the camera angless by rotating the
t barrel an
nd the ball joint of the bod
dy and lock tthem.
7. Mount
the camera on the QRM head using the 1/4
4’’ camera mount
bolt.
1 5 .5 . QRM H a n
ndle ba r M ount
in g
The QRM
Handle
ebar Mountin
ng enables you to mountt the camera
a on your mo
otorcycle’s hhandlebar (be
etween 7/8’’ and 1
40
| PR
RISM
1/2’’ diameter).
Yo
ou can choosse the directions of the m
mounting arm
m and the U-b
bolt to best fi t the mount on your hand
dlebar.
When
n you are not recording, you
y can simp
ply separate tthe QRM hea
ad from the QRM
body.
15.5.1
1. QRM Hand
dlebar Moun
nting Components
QRM
QRM
M head conttains the sta
andard 1/4’’ camera mou
unt bolt on w
which you fa
asten the cam
mera.
QRM
M body comb
bines with th
he QRM head
d.
The U-bolt can be
b installed e
either upward
ds or downw
wards.
U-Bolt
The U-bar nuts tighten
the m
mounting arm
m and the U-b
bolt together .
U-Bar Nutss
Lockks the barrel at the adjussted angle.
Locking Kno
ob
Mounting
Arm
The mounting arm
can be installed either upward
ds or downw
wards and either
forwards or
backkwards.
15.5.2
2. QRM Hand
dlebar Moun
nting Installlation
1. Choose
the p
position of the
e handlebar you want to mount the ca
amera on.
2. Choose
the d
direction of th
he U-bolt and
d the mountin
ng arm.
3. Pile
P them together and tig
ghten them using
the U-b
bolt nuts.
4. Adjust
the camera angle by
b rotating th
he barrel and
d the ball join
nt and lock th
hem.
5. Mount
the camera on the QRM head using the 1/4
4’’ camera mount
bolt.
1 6 . CAM ER
RA SOFT
TW ARE
n ge r
1 6 .1 . PRI SM D e vice M a na
PRISM
M Device Ma
anager allow
ws you to upg
grade firmwa
ares and con
nfigure settin
ngs directly fr
from your PC
C. It is availa
able for
both Windows
and
d Mac. For more
informattion and dow
wnload, pleas
se visit www..sena.com.
1 6 .2 . PRI SM S
Sm a r t phon
n e App
PRISM
M Smartphone App allow
ws you to co
onfigure sett ings and vie
ew user man
nual and quicck reference
e directly from
m your
mobile
e phone. It iss available fo
or both Andro
oid and IOS. For more infformation, please visit ww
ww.sena.com
m.
41
| PR
RISM
1 7 . CAM ER
RA SPEC
CI FI CAT
TI ON S
eneral
Ge
●
Record time: 2 hourss
●
Working
g distance (Se
ena headsets)): up to 100 me
eters (110 yarrds) in open te
errain
●
Operating temperature: -10˚C ~ 55
5˚C (14°F ~ 13
31°F)
●
Dimenssions (main mo
odule): 59.0mm x 43.0mm x 21.0mm (2.3
3 in x 1.75 in x 0.8 in)
Blu
uetooth
●
Profile: Headset Proffile, Hands-Fre
ee Profile (HF P)
●
Bluetoo
oth 4.0
Au
udio
●
Internall microphone
●
Wind no
oise reduction
ns
Op
ptical
●
Field off view: 137 deg
grees
●
3.5M pixel CMOS
●
Aperturre f/2.0
Vid
deo mode
●
Resoluttion
○
1080p 30fpss
○
720p 30 / 60
0fps
○
480p 120fpss
hoto mode
Ph
●
Resoluttion
○
3:2 3.5M
42
| PR
RISM
●
○
4:3 5M
○
4:3 3.2M
○
16:9 3M
Burst sh
hot
○
10 / 5 / 3 picc per sec
Tim
me lapse mo
ode
●
Photo & Video
○
pic per 1 / 3 / 5 / 10 / 30 /6
60 sec
TV
V-out
●
Micro H
HDMI
Ba
attery
●
Chargin
ng time: 3.5 ho
ours
●
1100mA
Ah
●
Type: L
Lithium ion batttery
Ce
ertificates
●
CE, FC
CC, IC
43

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2014:08:04 18:40:30+09:00
Modify Date                     : 2014:08:05 13:31:38+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:08:05 13:31:38+09:00
Format                          : application/pdf
Title                           : Microsoft Word - Manual_PRISM-v1.0.doc (eng)
Creator                         : Administrator
Document ID                     : uuid:5f422857-8407-4e01-bae1-ec135125f00a
Instance ID                     : uuid:69d7de48-d1aa-423f-ac2e-fd1503ee9653
Page Count                      : 43

EXIF Metadata provided by EXIF.tools