SENA TECHNOLOGIES SP18 BLUETOOTH STEREO SNOW HEADSET User Manual

Sena Technologies,Inc. BLUETOOTH STEREO SNOW HEADSET

UserManual.wiki >

SENA TECHNOLOGIES >

SP18 User Manual HTML Version

User Manual

SEN

now Sp

rts Blu

nowtal

tooth H

.sena.c

adset

Interco

User’s

uide

| Sn

wtalk

| Snowtalk

Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior

notice.

Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SMH5-FM™,

SPH10™, SPH10H™, SPH10H-FM™, SMH10R™, SPH10S™, SPH10H™, SR10™, SM10™ are trademarks of Sena Technologies,

Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license.

iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the

trademark or registered trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their

respective owners.

| Snowtalk

CONTENTS

1. INTRODUCTION

2. PACKAGE CONTENTS

3. INSTALLING THE SNOWTALK ON YOUR HELMET

4. BASIC FUNCTIONS

4.1 Powering On/Off

4.2 Charging

4.3 Checking the Battery Level

4.4 Volume Adjustment

4.5 Function Priority

5. PAIRING THE SNOWTALK WITH BLUETOOTH DEVICES

5.1 Mobile Phone Pairing

5.2 Second Mobile Phone Pairing

5.3 Bluetooth Stereo Device Pairing

5.4 Intercom Pairing with other Snowtalk headsets

6. MOBILE PHONE CALL MAKING AND ANSWERING

7. STEREO MUSIC

7.1 By Stereo Audio Cable

7.2 By Bluetooth Wireless Stereo

8. TWO-WAY INTERCOM

8.1 Start Two-way Intercom

8.2 End Two-way Intercom

8.3 Intercom Reconnection

9. THREE-WAY CONFERENCE INTERCOM

9.1 Start Three-way Intercom

9.2 End Three-way Intercom

10. FOUR-WAY CONFERENCE INTERCOM

10.1 Start Four-way Intercom

10.2 End Four-way Intercom

11. INTERCOM AND MOBILE PHONE CALL

12. SNOWTALK CONFIGURATION SETTING

12.1 Enabling/Disabling Voice Prompt

12.2 Enabling/Disabling Sidetone

12.3 Enabling/Disabling Advanced Noise Control™

12.4 Delete All Bluetooth Pairing Information

12.5 Reset to Factory Default Setting

12.6 Exit Voice Configuration Menu

13. FAULT RESET

14. FIRMWARE UPGRADE

| Snowtalk

15. OPERATION QUICK REFERENCE

CERTIFICATION AND SAFETY APPROVALS

FCC Compliance Statement

FCC RF Exposure Statement

FCC Caution

CE Declaration of Conformity

Industry Canada Statement

Bluetooth License

WEEE (Waste Electrical and Electronic Equipment )

SAFETY INFORMATION

Product Storage and Management

Product Use

Battery

PRODUCT WARRANTY AND DISCLAIMER

Limited Warranty

Warranty Exclusions

Reasons for Limited Liabilities

Limitation of Liability

Liabilities Disclaimer

Warranty Service

Free-of-charge Service

Charged Service

Return for Full Refund

| Snowtalk

1 . I NTRODUCTI ON

Thank you for choosing the Sena Snowtalk, Snow Sports Bluetooth Communication System. With the Snowtalk, you can

call handsfree on your Bluetooth mobile phone, listen to stereo music and have intercom conversations in full duplex with

other Snowtalk users.

The Snowtalk is compliant with the Bluetooth 3.0 supporting the following profiles: Headset Profile, Hands-Free Profile

(HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with

the manufacturers of other devices to determine their compatibility with this headset.

Please read this user’s guide carefully before using the headset. Also check www.sena.com for the latest version of the

user’s guide and additional information related to Sena Bluetooth products.

The Snowtalk features:

● Bluetooth handsfree for Bluetooth mobile phones

● Bluetooth pairing for dual mobile phones

● Bluetooth stereo headset for Bluetooth audio devices such as MP3 players

● Bluetooth intercom up to 700 meters (760 yards)*

● Four-way intercom

● Three-way conference phone call with intercom participant

● Stereo music by 3.5mm audio cable

● Advanced Noise Control™

● Easy installation in ear pockets

● Easy operation by two big buttons

● Optional attachable external microphone

● Firmware upgradeable

* in open terrain

Key Specifications:

● Bluetooth 3.0

● Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio

Video Remote Control Profile (AVRCP)

2 .

Sno

Righ

●

Left

●

USB

3.5m

ACKA

talk Heads

Button

Enter into

Start and

Play and

Track-for

Enter into

Navigate

utton

Enter into

nswer a

Last num

djust vol

Track-ba

ower & D

Stereo A

E CON

intercom p

end interco

ause Bluet

ard (Stere

voice confi

hrough con

mobile pho

Bluetooth s

d end a m

er redial

ume level

k (Stereo M

ta Cable

dio Jack C

ENTS

iring

conversati

oth stereo

Music)

uration setti

iguration m

e pairing m

ereo device

bile phone

sic)

ble

evice

pairing mo

all

| Sn

wtalk

Exter

nal Microp

one

| Sn

wtalk

| Snowtalk

3 . I NSTALLI NG THE SNOW TALK ON YOUR HELMET

1. Place the left and right speakers in the ear pockets of your helmet. Make sure the speakers are facing towards your

ears.

2. Hide the wires in the back of the helmet.

3. If you want to deliver your voice more clearly, you can install the external microphone on your helmet. Plug in the

microphone to the right speaker.

4. Wrap the microphone’s velcro around the chin strap with the microphone facing downwards.

4 . BASI C FUNCTI ONS

4 .1 Pow ering On/ Off

To power on the Snowtalk, press the (L) Button and the (R) Button simultaneously for one second to power on. You will

hear ascending beeps and “Hello”. To power off, press the (L) Button and the (R) Button at the same time. You will hear

descending beeps and “Goodbye”.

4 .2 Charging

When the battery is low, you will hear mid-tone triple beeps and a voice prompt, “Low Battery”. You can charge the

Snowtalk by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can

use any standard micro-USB cable to charge the Snowtalk. The charging LED is red while charging, and turns to blue

when the headset is fully charged. It takes about 2.5 hours to be completely charged.

Note:

1. The USB Power & Data Cable is also used for firmware upgrade of the Snowtalk.

2. The USB wall charger is not included in the package. Any 3rd party USB charger can be used with Sena products if the

charger is approved by either FCC, CE, IC, or other locally approved agencies that Sena accepts. Please contact Sena

regarding locally approved agencies Sena accepts.

4 .3 Checking the Battery Level

When the headset is powering on, the red LED flashes rapidly indicating the battery level.

4 flashes = High, 70~100%

3 flashes = Medium, 30~70%

2 flashes = Low, 0~30%

4 .4 Volum e Adjustm ent

| Snowtalk

You can adjust the speaker volume using the (R) Button. To increase volume, press the (R) Button once. To decrease

volume, quickly press the (R) Button twice. You will hear a beep when the volume reaches maximum or minimum level.

Each audio source’s volume is set and maintained independently at different levels even after you turn off the headset.

For example, once you set the volume for mobile phone handsfree, it will not change even if you adjust the volume for

Bluetooth MP3 music. So you can always maintain the preferred optimum volume level for each audio source.

4 .5 Function Priority

The Snowtalk operates in the following order of priority:

(Highest) Mobile Phone

Intercom

(Lowest) Bluetooth Stereo Music

A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by an

intercom call, and intercom conversation is interrupted by incoming mobile phone call.

5 . PAI RI NG THE SNOW TALK W I TH BLUETOOTH DEVI CES

Before using the headset with any of Bluetooth devices for the first time, you need to pair them together. The Snowtalk

can pair with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, and with other Sena Bluetooth headsets.

This pairing operation is required only once for each Bluetooth device. The headset will remain paired with the devices

and automatically reconnect to them when they are within range. You will hear a high tone single beep and a voice

prompt when the headset reconnects to the paired device: “Phone connected” to a mobile phone, “Media connected” to

a Bluetooth stereo device.

5 .1 Mobile Phone Pairing

1. Turn on the headset and press the (R) Button for 5 seconds until you hear multiple beeps. You will hear a voice

prompt saying “Phone pairing”.

2. Search for Bluetooth devices on your mobile phone. Select the headset in the list of the devices detected on the

mobile phone.

3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

4. The mobile phone confirms that pairing has been completed and the headset is ready to use. You will hear a voice

prompt from the headset saying “Your headset is paired”.

5. If the pairing process is not completed within three minutes, the headset will return to stand-by mode.

5 .2 Multipoint Pairing

Typical Bluetooth headsets can connect with only one HFP (Hands-Free Profile) device, but multipoint pairing allows the

| Snowtalk

headset to connect with two HFP devices at the same time.

1. To pair another mobile phone, press the (R) Button for 5 seconds until you hear multiple beeps and hear a voice

prompt saying “Phone pairing”.

2. Within 2 seconds, tap the (R) Button. You will hear a voice prompt saying “Multipoint pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the headset in the list of the devices detected on the

mobile phone.

4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.

5. The mobile phone confirms that pairing has been completed and the headset is ready to use. You will hear a

voice prompt from the headset saying “Your headset is paired”.

5 .3 Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the

headset with it separately. When the headset is paired with the mobile phone, it is also paired as a stereo music

device.

2. If you have a stand alone Bluetooth stereo device, follow the pairing procedure in “6.1 Mobile Phone Pairing”.

Note:

1. If Bluetooth connection between the headset and a mobile phone is disconnected, tap the (R) Button for one second

to recover the Bluetooth connection immediately.

2. If Bluetooth connection between the headset and a media player is disconnected, press the (L) Button for one

second to recover the Bluetooth connection and play.

5 .4 I ntercom Pairing w ith other Snow talk headsets

The Snowtalk can be paired with up to three other headsets for Bluetooth intercom conversation.

1. Turn on the two Snowtalk headsets (A and B) that you would like to pair with each other.

2. Press and hold the (L) Button of the headset A and B for 5 seconds. You will hear a voice prompt saying “Intercom

pairing”.

3. Simply tap the (L) Button of any one of the two headsets A or B (It doesn’t matter that you choose A or B.) and wait

until the intercom connection is established. The two headsets A and B will be paired with each other for intercom

conversation. If the pairing process is not completed within one minute, the Snowtalk will return to stand-by mode.

4. You can make other pairings between the headset A and C, and between the headset A and D by following the

same procedure as above.

5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom

conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second

intercom friend, and third intercom friend. For example, after the pairing procedures listed above, headset D is the

first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the

third intercom friend of headset A.

| Snowtalk

Note:

1. The Snowtalk can be paired with all other Sena headset models such as the SMH10 and the EXPAND for intercom

conversation. Please follow the same procedure as above to pair with these headset models.

2. The SMH5 cannot participate in three-way or four-way conference intercom with the Snowtalk. The SMH5 has a limited

capability of having two-way intercom.

6 . MOBI LE PHONE CALL MAKI NG AND ANSW ERI NG

1. When you have an incoming call, simply tap the (R) Button to answer.

2. To end a call, press and hold the (R) Button for 1 second until you hear a beep, or wait for the caller to end the call.

3. To reject a call, press the (R) Button for 1 second until you hear a beep while the phone is ringing.

4. There are several ways to make a phone call:

- Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the

headset.

- Press and hold the (R) Button for 1 second in stand-by mode to activate the voice dialer of your mobile phone. For

this, the voice dialing feature must be available on the mobile phone. Refer to your mobile phone manual for further

instruction.

- To redial the last number, press and hold the (R) Button for 3 seconds in stand-by mode until you hear a high-tone

single beep. You will hear a voice prompt saying “Last number redial”.

Answer Tap the (R) Button

End Press and hold the (R) Button for 1 second while calling

Reject Press and hold the (R) Button for 1 second while ringing

Call Use phone keypad

Last number redial Press and hold the (R) Button for 3 seconds

Voice Dial Press and hold the (R) Button for 1 second

Mobile Phone Call Button Operations

7 . STEREO MUSI C

You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo.

7 .1 By Stereo Audio Cable

Plug your stereo MP3 player directly to the Snowtalk by using the enclosed 3.5mm stereo audio jack cable. To adjust the

volume, tap the (R) Button once to increase volume, and twice to decrease volume. You may adjust the volume on the

| Snowtalk

MP3 player also.

7 .2 By Bluetooth W ireless Stereo

The Bluetooth audio device must be paired with the Snowtalk by following the “Bluetooth Stereo Device Pairing”

procedures described in section 6.1. The Snowtalk supports the Audio/Video Remote Control Profile (AVRCP), so if your

Bluetooth audio device also supports the AVRCP, you can use the Snowtalk to remotely control music playback. You can

not only adjust the volume but also use the functions such as play, pause, next track and previous track.

1. To increase volume tap the (R) Button once. To decrease volume, tap the (R) Button twice.

2. To play or pause music, press and hold the (L) Button for 1 second until you hear a double beep.

3. To track forward, press and hold the (R) Button for 2 seconds. To track backward, press and hold the (L) Button for 2

seconds.

Note:

Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged

from the clamp unit to play music by Bluetooth.

7 .3 Music Sharing

You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation.

1. To start or terminate sharing music, press and hold the (L) Button during an intercom conversation. You will hear triple

beeps and a voice prompt saying “Music sharing”.

2. You and your intercom friend will listen to or terminate shared music.

3. To track forward, press and hold the (R) Button for 2 seconds. To track backwards, press and hold the (L) Button for 2

seconds.

Note:

1. Both you and your intercom friend can remotely control music playback during music sharing such as track forward and

track back.

2. When you are making or receiving a phone call during music sharing, the function will be paused.

8 . TW O- W AY I NTERCOM

8 .1 Start Tw o- w ay I ntercom

You can start an intercom conversation with one of any intercom friends by tapping the (L) Button: single tap to intercom

with the first intercom friend, double tap for the second intercom friend, and triple tap for the third intercom friend.

8 .2 End Tw o- w ay I ntercom

| Snowtalk

To terminate an intercom conversation, single tap the (L) Button. Any intercom connection with any intercom friend will be

terminated by a single tap. Double or triple tap will do nothing in this case.

1st intercom friend 2nd intercom friend 3rd intercom friend

Start intercom Single tap Double tap Triple tap

End intercom Single tap Single tap Single tap

Start & End Two-way Intercom

8 .3 I ntercom Reconnection

If your intercom friend goes out of range while having an intercom conversation, the intercom becomes disconnected after

some static noise. In this case, the Snowtalk automatically tries to reestablish the connection every 15 seconds with high-

tone double beeps. If you do not wish to reconnect, tap the (L) Button to stop the attempt.

9 . THREE- W AY CONFERENCE I NTERCOM

9 .1 Start Three-w ay I ntercom

You (A) can have a three-way conference intercom with two other Snowtalk friends (B & C) by establishing two intercom

connections at the same time. While a three-way conference intercom is in progress, mobile phone connection of all three

participants would be temporarily disconnected, but as soon as the conference intercom terminates or one of the

participants leaves the intercom, all mobile phones would be automatically reconnected. During the conference intercom,

if you have an incoming mobile phone call, terminate the conference intercom to automatically reconnect the mobile

phone and receive the call.

1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom.

2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an

intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A).

3. The second intercom friend (C) may join the intercom by making an intercom call to you (A).

4. Now you (A) and two Snowtalk intercom friends (B & C) are having a three-way conference intercom.

9 .2 End Three-w ay I ntercom

When you are a member of an active three-way conference intercom, you can completely terminate the conference

intercom or just disconnect an intercom connection with one of your active intercom friends.

1. Press the (L) Button for 1 second until you hear a beep to terminate three-way conference intercom completely. It

| Snowtalk

terminates both intercom connections with (B) and (C).

2. Tap or double tap the (L) Button to disconnect intercom connection with one of the two intercom friends accordingly.

For example, by single tapping the (L) Button, you can just terminate the intercom connection with the first intercom

friend (B). However, you still have the intercom connection with your second intercom friend (C).

(L) Button Operation Result

Press for 1” Disconnect (B) & (C)

Single tap Disconnect (B)

Double tap Disconnect (C)

End Three-way Intercom

1 0 . FOUR-W AY CONFERENCE I NTERCOM

1 0 .1 Start Four- w ay I ntercom

You can have four-way conference intercom with three other Snowtalk users by adding one more intercom participant to

the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is

an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your

intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).

1 0 .2 End Four-w ay I ntercom

As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just

disconnect a single intercom connection.

1. Press the (L) Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the

intercom connections between you (A), and your intercom friends (B) and (C).

2. Tap or double tap the (L) Button to disconnect the intercom connection with one of the two intercom friends

accordingly. However, when you disconnect the second friend (C) by double tapping the (L) Button, you will be

disconnected with the third participant (D) as well. This is because the third participant (D) is connected with you via

the second friend (C).

(L) Button Operation Result

Press for 1” Disconnect (B), (C) & (D)

Single tap Disconnect (B)

Double tap Disconnect (C) & (D)

End Four-way Intercom

| Snowtalk

1 1 . I NTERCOM AND MOBI LE PHONE CALL

1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can

choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and

stay on the intercom conversation.

a. To answer the phone call and stop the intercom conversation, tap the (L) Button. When you hang up the phone

call, the intercom will be automatically recovered.

b. To reject the phone call and stay on the intercom conversation, press the (R) Button for 2 seconds until you hear

a beep.

2. When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you

that there is an incoming intercom call. You will also hear a voice prompt saying “Intercom requested”. In this case,

the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You

have to hang up the mobile phone call to receive an intercom call.

3. You can make an intercom call to the intercom friend by tapping the (L) Button to form a three-way conference call

with the person on the mobile phone line. To disconnect the intercom first and go back to your private mobile phone

call, terminate the intercom by tapping the (L) Button. To end the mobile phone call first and maintain the intercom

conversation, press the (R) Button for one second.

Start Tap (L) Button while having a mobile phone call

End intercom first Tap (L) Button

End phone call first

Press (R) Button for one second

Wait for the called person to end the call

Start & End Three-way Conference Phone Call

1 2 . SNOW TALK CONFI GURATI ON SETTI NG

You can set the configuration of the headset by the voice menu instruction as below.

1. To enter into voice configuration menu, press and hold either the (L) Button or the (R) Button for 10 seconds until you

hear high-tone double beeps. You will also hear a voice prompt saying “Configuration menu”.

2. Press the (L) Button to navigate through the menus. You will hear voice prompts for each menu items as below.

3. You can enable or disable the feature or execute the command by tapping the (R) Button.

4. If none of the buttons is pressed within 10 seconds, the Snowtalk will exit the configuration and goes back to stand-

by.

| Snowtalk

5. If you want to exit the configuration immediately, press the (L) Button until you hear a voice prompt “Exit

configuration”, and tap the (R) Button.

The voice prompt for each menu item is as below:

(1) Phone pairing

(2) Multipoint pairing

(3) Voice prompt

(4) Sidetone

(5) Noise control

(6) Delete all pairings

(7) Factory reset

(8) Exit configuration

1 2 .1 Mobile Phone Pairing

Voice Prompt

“Phone pairing”

Factory Default N/A

To go into mobile phone pairing mode, tap the (+) Button or the (-) Button until you hear the voice prompt, “Phone

pairing”. Please refer to section 5.1 for details on mobile phone pairing. If you tap the (L) Button or the (R) Button, you

can exit from the phone pairing mode.

1 2 .2 Multipoint Pairing

Voice Prompt

“Multipoint pairing”

Factory Default N/A

To go into multipoint pairing mode, tap the (L) Button or the (R) Button until you hear the voice prompt, “Multipoint

pairing”. Please refer to section 5.2 for details on multipoint pairing. If you tap the (L) Button or the (R) Button, you can

exit from the multipoint pairing mode.

1 2 .3 Enabling/ Disabling Voice Prom pt

Voice Prompt

“Voice prompt”

Factory Default Enable

Enable / Disable Tap the (R) Button

You can disable voice prompts, but the following voice prompts are always on.

- Voice prompts for configuration setting menu

| Snowtalk

- Voice prompts for battery level Indicator

1 2 .4 Enabling/ Disabling Sidetone

Voice Prompt

"Sidetone"

Factory Default Disable

Enable / Disable Tap the (R) Button

Sidetone allows you to hear what you are speaking during intercom conversation or a phone call. It helps you to naturally

speak at the correct level according to varying helmet noise conditions.

1 2 .5 Enabling/ Disabling Advanced Noise Control™

Voice Prompt

"Noise control"

Factory Default Enable

Enable / Disable Tap the (R) Button

When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is

disabled, the background noise is mixed with your voice during intercom.

Note:

If you use the headset with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during

Normal Voice Recording. This feature is automatically disabled while in Ultra HD (UHD) Voice Recording mode.

1 2 .6 Delete All Bluetooth Pairing I nform ation

Voice Prompt

“Delete all pairings”

Factory Default N/A

Execute Tap the (R) Button

To delete all Bluetooth pairing information of the Snowtalk, tap the (R) Button when you hear a voice prompt, “Delete all

pairings”.

1 2 .7 Reset to Factory Default Setting

| Snowtalk

Voice Prompt

“Factory reset”

Factory Default N/A

Execute Tap the (R) Button

To restore factory default settings on the Snowtalk, tap the (R) Button when you hear a voice prompt, “Factory reset”.

1 2 .8 Exit Voice Configuration Menu

Voice Prompt

“Exit configuration”

Factory Default N/A

Execute Tap the (R) Button

To exit voice configuration menu and return to stand-by mode, tap the (R) Button when you hear a voice prompt, “Exit

configuration”.

Tap (L) Button Tap (R) Button

“Voice prompt” Enable / disable

“Sidetone” Enable / disable

“Advanced noise control”Enable / disable

“Delete All Pairings” Execute

“Factory Reset” Execute

“Exit Configuration” Execute

Voice Configuration Menu & Button Operations

1 3 . FAULT RESET

When the Snowtalk is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole

reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for

a second with light pressure. The Snowtalk will be switched off, and you have to turn the system back on and try again.

However, this will not restore the headset to factory default settings.

1 4 . FI RMW ARE UPGRADE

| Snowtalk

The Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. It is

available to download for both Windows and Mac. For more information on downloading the Device Manager, please visit

www.sena.com.

1 5 . OPERATI ON QUI CK REFERENCE

Type Operation Button Duration Beep

Basic Function Power on (R) + (L) Button 1 sec Ascending Beeps

Power off (R) + (L) Button Tap Descending Beeps

Volume up (R) Button Tap -

Volume down (R) Button Double Tap -

Mobile Phone Mobile phone pairing (R) Button 5 sec Multiple beeps

Multipoint pairing (R) Button 5 sec Multiple beeps

(R) Button within 2 sec

Answer mobile phone call (R) Button Tap -

End/reject mobile phone call (R) Button 1 sec -

Last number redial (R) Button 3 sec -

Voice dialer (R) Button 1 sec -

Intercom Intercom pairing (L) Button 5 sec Double tone beeps

Start/end intercom (L) Button Tap -

End conference intercom (L) Button 1 sec Mid-tone single beep

Cancel intercom

reconnection

(L) Button Tap -

Music Start/pause music (L) Button 1 sec Mid-tone double beeps

Track-forward (L) Button 2 sec -

Track-back (L) Button 2 sec -

| Snowtalk

CERTI FI CATI ON AND SAFETY APPROVALS

FCC Com pliance Statem ent

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try

to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antennae

● Increase the separation between the equipment and the receiver

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure St atem ent

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must

follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter

must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter

product procedures.

FCC Caution

Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could

void user’s authority to operate the equipment.

CE Declaration of Conform ity

This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this

product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further

information, please consult www.SenaBluetooth.com. Please note that this product uses radio frequency bands not

harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,

Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within

EFTA in Iceland, Norway and Switzerland.

| Snowtalk

I ndustry Canada Statem ent

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Bluetooth License

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under

license. Other trademarks and trade names are those of their respective owners.

The product is compliant with and adopts the Bluetooth® Specification 3.0 and has successfully passed all interoperability

tests that are specified in the Bluetooth® specification. However, interoperability between the device and other

Bluetooth®-enabled products is not guaranteed.

W EEE ( W ast e Electrical and Elect ronic Equipm ent )

The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and

electronic products, batteries, and accumulators must be taken to separate collection at the end of their

working life. This requirement applies to the European Union and other locations where separate collection

systems are available. To prevent possible harm to the environment or human health from uncontrolled waste

disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an official collection point

for recycling.

SAFETY I NFORMATI ON

Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or

damage to property.

Product Storage and Managem ent

● Keep the product free of dust. It may damage mechanical and electronic parts of the product.

● Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the

battery, and/or melt plastic parts of the product.

● Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and

damage electronic circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents

as this may damage the product.

● Do not paint the product. Paint may obstruct moving parts or interfere with the normal operation of the product.

● Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.

| Snowtalk

● Do not disassemble, repair or modify the product as this may damage the product and invalidate the product

warranty.

Product Use

● In some regions, it is prohibited by law to ride motorcycles or bicycles while wearing headsets. Therefore be certain

to comply with all relevant laws in the region before using the product.

● Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability. Keep

the volume at a modest level.

● Do not cause impact to the product or touch it with sharp tools as this may damage the product.

● Do not use the product in high-temperatures or apply heat to the product as this may cause damage, explosion, or

fire.

● Keep the product dry and away from water. It may damage the product.

● Keep product away from pets or small children. It may damage the product or cause accidents.

● Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or

interference with the product.

● In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and

refrain from using the product. In a place where wireless communication is prohibited, electromagnetic waves may

cause hazards or accidents.

● Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power

and heed any regulations, instructions, and signs in the area.

● When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to

laws regarding the use of communications devices while driving.

● Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic

accidents.

● Before driving, fasten the product to the helmet, and double-check that it is fastened. Separation of the product

while driving may cause damage to the product or accidents.

● If the product is damaged, stop using it immediately. It may cause damage, explosion, or fire.

Bat tery

This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to

the following:

● Never separate the battery from the product as this may damage the product.

● The battery performance may be reduced over time with usage.

● In recharging the battery, make sure to use an approved charger provided by the manufacturer. Use of a non-

approved charger may cause fire, explosion, leakage, and other hazards may also reduce the life time or

performance of the battery.

● Store the battery at temperatures of 15°C~25°C (59°F~77°F). Higher or lower temperatures may reduce the

capacity and life of the battery, or may cause temporary non-operation. Do not use the product in sub-zero

| Snowtalk

temperature, because it may cause serious reduction of the battery performance.

● If you apply heat to the battery or throw it into fire, it may explode.

● Do not use the product with a damaged battery. It may explode and/or cause accidents.

● Never use a damaged charger. It may explode and/or cause accidents.

● Battery life may vary depending on conditions, environmental factors, functions of the product in use, and devices

used with it.

PRODUCT W ARRANTY AND DI SCLAI MER

Lim ited W arranty

Limited Warranty

Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product

manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable

for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or

flaws that occur due to problems in manufacture.

Warranty Period

Sena guarantees free-of-charge replacements of defective parts of the product or flaws that may have occurred due to

problems in manufacture for a period of 2 years from the date of initial purchase.

Termination

Quality warranty of the product becomes effective on the date of initial purchase. In addition, the quality warranty of the

product expires when the warranty period expires. However, in the following cases, the warranty will be terminated

prematurely.

● In the event the product has been sold or transferred to a third party.

● In the event the manufacturer's name, serial number, product label, or other markings have been modified or

removed.

● In the event any unauthorized person has tried to disassemble, repair, or modify the product.

Notice and Waiver

By buying and using this product, you relinquish considerable legal rights including any claim for compensation for

damages. Therefore, be certain to read and understand the following terms and conditions before using the product. Use

of this product will constitute consent to this agreement, and forfeiture of rights to all claims. If you do not consent to all

the terms and conditions of this agreement, return the product for a refund. (Refer to the section "Return for Full Refund".)

1. You agree that you, your descendants, legal proxies, successors, or transferees will not raise permanent volitional

request for any suit, claim, implementation, redemption or similar action from Sena with regard to any occasion such

as difficulty, pain, suffering, inconvenience, loss, injury, or death which may occur to you or a third party during the

use of this product.

2. You must completely understand and accept all risks (including those occurring due to any careless behavior of

| Snowtalk

yours or others) which may occur during the use of this product.

3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in

sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the

product does not limit your abilities and that you are able to use it safely.

4. You must be an adult who can take responsibilities for using the product.

5. You must read and understand the following warnings and alerts:

● Sena; together with employees, managers, partners, subsidiaries, representatives, agents, supporting firms and

suppliers, sole sellers of Sena (collectively referred to as "the company") recommend that, before using the

product and similar devices of any brands including its derivative models, you collect any relevant information in

advance and be entirely prepared in terms of weather, traffic situation, and road conditions.

● When you use the product while you operating any vehicle or equipment such as motorcycles, scooters, mopeds,

ATVs, or quad-bikes (hereinafter called as "transportation means"), you must take complete caution regardless of

the location of such operation.

● Use of the product on the road may cause such risks as fracture, serious disability, or death.

● Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or

third parties which are involved in the manufacturing.

● Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full

responsibility for any damage or loss caused by all risk factors which may occur when using the product.

● When you use the product, use good judgment; never use it under the influence of alcohol.

6. You must read and completely understand all terms and conditions of legal rights and warnings that are involved in

using the product. In addition, usage of the product constitutes acceptance of all terms and conditions regarding

waiver of rights.

W arranty Exclusions

Reasons for Limited Liabilities

If you do not return the product after purchasing it, you relinquish all rights to liabilities, loss, claims, and claims for

reimbursement of expenses (including attorney's fees). Therefore, Sena will not be liable for physical injury, death, or any

loss or damage of transportation means, possessions, or assets which belong to you or third parties that may have

occurred while you use the product. Further, Sena will not be liable for any substantial damage not related to the,

condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on

the user regardless of its use by the initial purchaser of a third party.

Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the

product is entirely your responsibility.

Limitation of Liability

TO THE FULL EXTENT ALLOWED BY LAW, SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,

WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,

| Snowtalk

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF

BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR

INTERRUPTION OF ITS PRODUCTS, EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF

THE PURCHASE PRICE PAID, AT SENA’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE

AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE

TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID

FOR THE PRODUCT BY THE PURCHASER.

Liabilities Disclaimer

In addition to damages which may occur due to the use of the product, Sena will not be liable for damages of the product

which occur due to the following events.

In the event the product is misused or used for purposes other than its intended purposes.

In the event the product is damaged because the user does not follow the content of the product manual.

In the event the product is damaged because it has been left unattended or has undergone any other accident.

In the event the product is damaged because the user has used any parts or software which are not provided by the

manufacturer.

In the event the product is damaged because the user has disassembled, repaired, or modified it in such way as is not

explained in the product manual.

In the event the product is damaged by a third party.

In the event the product is damaged due to Acts of God (including fire, flood, earthquake, storm, hurricane or other

natural disaster).

In the event the surface of the product is damaged by use.

W arranty Service

To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along

with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other

relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must

include the whole package as it was purchased.

Free-of-charge Service

Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the

scope of the product warranty during the warranty period.

Charged Service

| Snowtalk

Sena will provide charged repair or replacement service for the product when the product warranty period has been

expired or when the product damage is beyond the scope of the product warranty. For further information on charged

service, you may contact the service center of Sena.

Return for Full Refund

Should you not agree to the terms and conditions explained above, you may return the product for a full refund. To get a

refund, within 14 days from the purchase date you must return the product to the seller in such a condition as it was

purchased.

Unless you return the product within 14 days from the purchase date, you will have read and agreed to all the terms and

conditions explained above, and Sena will not be liable for any claim for damages related with the product.

| Snowtalk

CERTI FI CATI ON ET HOMOLOGATI ON EN TERMES DE SÉCURI TÉ

Déclaration de conformité FCC

Cet appareil est en conformité avec la partie 15 de la réglementation FCC. L'exploitation est autorisée aux deux

conditions suivantes :

(1) Cet appareil ne doit pas créer d’interférences préjudiciables et

(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon

fonctionnement.

Ce matériel a été testé et déclaré en conformité avec les limites d'un appareil numérique de Classe B, suivant la partie 15

de la réglementation FCC. Ces limites sont destinées à assurer une protection raisonnable contre les interférences

préjudiciables dans un environnement résidentiel. Ce matériel génère, utilise et peut dégager de l’énergie en radio

fréquence et, s’il n’est pas installé et utilisé en conformité avec les instructions, peut provoquer des interférences

préjudiciables avec les communications radio. Cependant, il n’y a aucune garantie que des interférences ne se produiront

pas dans des installations particulières. Si ce matériel provoque des interférences préjudiciables à une réception radio ou

TV, ce qui peut être déterminé en allumant puis en éteignant l'appareil, il est vivement recommandé à l'utilisateur

d'essayer de mettre un terme à ces interférences en prenant l'une des mesures suivantes :

Réorienter ou repositionner l'antenne réceptrice Augmenter la séparation entre le matériel et le récepteur.

Connecter le matériel à une sortie sur un circuit différent de celui sur lequel le récepteur est connecté.

Contacter le revendeur ou un technicien radio/TV expérimenté pour une assistance.

Énoncé FCC sur l’exposition aux radiations RF :

Cet équipement est conforme aux réglementations FCC d’exposition aux radiations définies pour un environnement non

contrôlé. Les utilisateurs suivront les instructions d’exploitation spécifiques pour répondre aux exigences de conformité

sur l’exposition aux RF. L’antenne utilisée pour cet appareil ne doit pas fonctionner en même temps qu’une autre antenne

ou émetteur, sauf s'il y a conformité avec les procédures FCC des produits multi-émetteurs.

Précautions FCC

Tout changement ou modification apporté au matériel qui n’aurait pas été approuvé par le responsable de la conformité

pourrait invalider le droit de l’utilisateur à faire fonctionner ce matériel.

Déclaration de conformité CE

Ce produit porte un marquage CE, conformément aux dispositions de la directive R&TTE (99/5/CE). Sena déclare par la

présente que ce produit est conforme aux exigences principales et autres dispositions correspondantes de la directive

1999/5/CE. Pour plus d’informations, veuillez consulter le site www.senabluetooth.fr. Veuillez noter que ce produit utilise

des bandes de radio fréquence non uniformisées au sein de l’Union Européenne. Au sein de l’Union Européenne, ce

| Snowtalk

produit est destiné à être utilisé en Autriche, Belgique, Danemark, Finlande, France, Allemagne, Grèce, Irlande, Italie,

Luxembourg, Pays-Bas, Portugal, Espagne, Suède et Royaume-Uni et au sein de l’AELE, en Islande, Norvège et Suisse.

Déclaration de conformité IC (Industrie Canada)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

(1) Cet appareil ne doit pas créer d'interférences.

(2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon

fonctionnement.

Licence Bluetooth

La marque et les logos Bluetooth® sont la propriété de Bluetooth SIG, Inc et toute utilisation de ces marques par Sena

s'effectue sous licence. D’autres marques et appellations commerciales sont celles de leurs propriétaires respectifs. Le

produit est conforme à et suit la spécification Bluetooth® 3.0 et a réussi tous les tests d'interopérabilité mentionnés dans

la spécification Bluetooth®. Cependant, l'interopérabilité entre l'appareil et d'autres produits Bluetooth® n'est pas garantie.

WEEE(DEEE:Déchets d'équipements électriques et électroniques)

Le symbole poubelle barrée figurant sur le produit, la documentation ou l’emballage signifie que tous les produits

électriques et électroniques, les batteries et les accumulateurs doivent être conduits en fin de vie dans une structure de

récupération et de recyclage séparée. Cette exigence s’applique à l’Union Européenne mais aussi aux autres pays où

des systèmes de récupération et de recyclage séparés existent. Pour prévenir toutes les conséquences possibles pour

l’environnement ou la santé d’une élimination de déchets non con- trôlée, veuillez ne pas considérer ces produits comme

des déchets mé- nagers, mais vous rendre dans une structure de récupération officielle pour le recyclage.

I NFORMATI ONS SUR LA SÉCURI TÉ

Veuillez vous assurer que le produit est utilisé de manière adéquate en respectant les avertissements et précautions

énumérés ci-dessous pour éviter tout risque et/ou dommage matériel.

Rangement du produit et manipulation

Garder le produit à l'abri de la poussière. Cela pourrait endommager les pièces mécaniques et électroniques du produit.

Ne pas ranger le produit dans des zones chaudes car cela pourrait réduire la durée de vie des appareils électroniques,

endommager la batterie et/ou faire fondre les pièces en plastique du produit.

Ne pas stocker l'appareil dans des zones froides. Des changements de températures brusques peuvent former de la

condensation et endommager les circuits électroniques. Ne pas nettoyer le produit avec des solvants de nettoyage, des

| Snowtalk

produits chimiques toxiques ou des détergents puissants car cela pourrait endommager le produit.

Ne pas peindre le produit. La peinture pourrait obstruer les pièces amovibles ou interférer avec le fonctionnement normal

du produit.

Ne pas laisser tomber ou cogner l'appareil. Cela pourrait endommager le produit ou ses circuits électroniques internes.

Ne pas démonter, réparer ou modifier le produit car cela pourrait endommager le produit et annuler la garantie du produit.

Utilisation du produit

● Dans certaines régions, la loi interdit le port d'écouteurs en étant à moto ou à vélo. Assurez-vous donc de

respecter toutes les lois correspondantes dans la région avant d'utiliser le produit.

● L'utilisation du produit à volume élevé pendant une période prolongée peut endommager les tympans ou la

capacité auditive. Garder le volume sonore à un niveau modéré.

● Ne pas heurter le produit ou le toucher avec des outils tranchants car cela pourrait l'endommager.

● Ne pas utiliser le produit dans des zones chaudes ou chauffer le produit car cela pourrait occasionner des

dommages ou provoquer une explosion ou un incendie.

● Garder le produit au sec et à l'abri de l'eau. Cela pourrait endommager le produit.

● Tenir le produit hors de portée des animaux ou jeunes enfants. Cela pourrait endommager le produit ou

provoquer des accidents.

● Ne pas utiliser le produit près d'un four à micro-ondes ou d'un appareil LAN sans fil car cela pourrait provoquer

un dysfonctionnement ou des interférences avec le produit.

● Éteindre et ne pas utiliser pas le produit dans les endroits où les communications sans fil sont interdites comme

les hôpitaux ou les avions. Les ondes électromagnétiques peuvent entraîner des risques ou des accidents dans

ces endroits.

● Ne pas utiliser le produit près d'explosifs. En cas de risques d'explosion à proximité, éteindre le produit et

respecter toute réglementation, instruction ou panneau présent dans la zone.

● Pour des raisons de sécurité, conduire à faible vitesse (inférieure à 35 km/h) pendant l'utilisation du produit.

S'assurer en outre de respecter les lois concernant l'utilisation des appareils de communication lors de la

conduite.

● Ne pas mettre le produit à un endroit où il pourrait entraver le champ de vision du conducteur et ne pas le

manipuler durant la conduite. Cela pourrait causer des accidents de la route.

● Avant de conduire, attacher le produit au casque et s'assurer qu'il est bien fixé. Le retrait du produit durant la

conduite peut provoquer des dommages au produit ou des accidents.

● Si le produit est endommagé, arrêter immédiatement de l'utiliser. Cela pourrait entraîner des dommages, une

explosion ou un incendie.

Batterie

● Ce produit contient une batterie rechargeable irremplaçable à l'intérieur. S'assurer par conséquent lors de

l'utilisation du produit de respecter ce qui suit :

● Ne jamais séparer la batterie du produit car cela pourrait endommager le produit.

● Les performances de la batterie peuvent s'altérer au fur à et mesure de son utilisation.

| Snowtalk

● Pendant le chargement de la batterie, s'assurer d'utiliser un chargeur agréé fourni par le fabricant. Utiliser un

chargeur non agréé peut entraîner un incendie, une explosion, une fuite et d'autres risques et peut également

réduire la durée de vie ou les performances de la batterie.

● Conserver la batterie à des températures entre 15 °C et 25 °C. Des températures supérieures ou inférieures

peuvent réduire la capacité et la durée de vie de la batterie ou empêcher momentanément l'utilisation de celle-ci.

Ne pas utiliser le produit en cas de températures en dessous de zéro car cela pourrait causer une réduction

significative des performances de la batterie.

● Chauffer la batterie ou la jeter au feu peut provoquer son explosion.

● Ne pas utiliser le produit avec une batterie endommagée. Il pourrait exploser et/ou causer des accidents.

● Ne jamais utiliser un chargeur endommagé. Il pourrait exploser et/ou causer des accidents.

● La durée de vie de la batterie dépend des conditions, des facteurs environnementaux, des fonctions en cours

d'utilisation du produit et des appareils utilisés conjointement.

Garantie limitée

Sena Technologies, Inc. (« Sena ») garantit la qualité du produit sur la base des caractéristiques techniques énoncées

dans le manuel du produit et les données concernant la garantie du produit. La garantie du produit s'étend ici seulement

au produit. Sena n'est pas responsable des pertes, blessures aux personnes ou pertes de propriétés qui pourraient

résulter de l'utilisation du produit en dehors des pièces défectueuses ou des défauts survenant en raison de problèmes

lors de la fabrication.

Période de garantie

Sena garantit le remplacement sans frais des pièces défectueuses du produit ou des défauts ayant pu survenir en raison

de problèmes lors de la fabrication pour une période de deux ans à compter de la date d'achat initiale

FIN DE LA GARANTIE

La garantie de qualité du produit prend effet le jour de l'achat initial. De plus, la garantie de qualité du produit expire

lorsque la période de garantie expire. Dans les cas suivants toutefois, la garantie prendra fin avant terme.

• Dans le cas où le produit a été vendu ou transféré à un tiers.

• Dans le cas où le nom, le numéro de série, l'étiquette du produit ou d'autres marquages du fabricant ont été modifiés ou

supprimés.

• Dans le cas où une personne non autorisée a tenté de démonter, réparer ou modifier le produit.

Avis et renonciation

En achetant et en utilisant ce produit, vous renoncez à des droits légaux importants y compris les demandes

d'indemnisation pour dommages. En conséquence, assurez-vous de lire et de comprendre les conditions suivantes avant

d'utiliser le produit. L'utilisation de ce produit constitue un consentement au présent accord et un renoncement aux droits

à toute indemnisation. Si vous ne consentez pas à toutes les conditions du présent accord, renvoyez le produit pour un

| Snowtalk

remboursement. (Reportez-vous à la section « Renvoi pour remboursement total ».)

1. Vous convenez que vous, vos descendants, représentants légaux, héritiers, ou cessionnaires ne ferez de votre propre

gré et, de manière permanente, de demande de procès, d'indemnisation, d'exécution, de rachat ou toute action similaire

à l'encontre de Sena concernant toute occasion comme la difficulté, la douleur, la souffrance, le désagrément, la perte, la

blessure ou le décès qui se produirait à votre encontre ou à un tiers durant l'utilisation de ce produit.

2. Vous devez parfaitement comprendre et accepter tous les risques (y compris ceux se produisant en raison de votre

négligence ou d'autres) pouvant survenir durant l'utilisation de ce produit.

3. Vous avez la responsabilité de vous assurer que votre condition médicale permet l'utilisation du produit et que votre

condition physique est suffisante pour utiliser tout appareil pouvant être utilisé conjointement. De plus, vous devez vous

assurer que le produit ne limite pas vos capacités et que vous êtes en mesure de l'utiliser en toute sécurité.

4. Vous devez être majeur et porter la responsabilité de l'utilisation du produit.

5. Vous devez lire et comprendre les avertissements et les alertes suivantes :

● Sena, en collaboration avec les employés, responsables, partenaires, filiales, représentants, agents, entreprises

et fournisseurs impliqués, seuls vendeurs de Sena (collectivement désignés comme « l'entreprise ») vous

recommandent, avant d'utiliser le produit et des appareils similaires de différentes marques y compris leurs

modèles dérivés, de recueillir à l'avance toutes les informations pertinentes et d'être entièrement préparé quant

aux conditions météorologiques et routières ainsi qu'à l'état de la circulation.

● Si vous utilisez le produit tout en conduisant un véhicule tel que des

● motos, scooters, cyclomoteurs, quatre-quatre ou quads (ci-après dénommés « moyens de transport »), vous

devez faire preuve de la plus grande prudence quel que soit l'endroit d'utilisation.

● L'utilisation du produit sur la route peut entraîner des risques de fractures, d'invalidité grave ou de décès.

● Les facteurs de risque, pouvant survenir lorsque vous utilisez le produit, peuvent résulter d'erreurs du fabricant,

de ses agents ou de tiers impliqués dans la fabrication.

● Les facteurs de risque pouvant survenir lorsque vous utilisez le produit, peuvent être imprévisibles. Vous devez

par conséquent porter l'entière responsabilité pour tout dommage ou perte causée par l'ensemble des facteurs de

risque pouvant survenir lors de l'utilisation du produit.

● Lorsque vous utilisez le produit, faites preuve de discernement ; ne l'utilisez jamais sous l'emprise de l'alcool.

6. Vous devez lire et comprendre intégralement toutes les conditions se rapportant aux droits légaux et aux

avertissements qu’implique l'utilisation du produit. L'utilisation du produit constitue en outre une acceptation de l'ensemble

des conditions concernant la renonciation des droits.

Exclusions de garantie

Raisons des limitations de responsabilité

Si vous ne renvoyez pas le produit après l'avoir acheté, vous renoncez à tous les droits de responsabilité, de pertes, de

réclamations et d'indemnisations pour le remboursement des dépenses (y compris les honoraires d'avocat). Par

conséquent, Sena n'est pas responsable des blessures physiques, décès ou pertes ou dommages des moyens de

transport, possessions ou actifs vous appartenant ou appartenant à des tiers ayant pu se produire lors de votre utilisation

du produit. D'autre part, Sena n'est pas responsable des dommages substantiels qui ne sont pas liés à l'état, à

l'environnement ou au dysfonctionnement du produit. Tous les risques associés à l'utilisation du produit dépendent

| Snowtalk

entièrement de l'utilisateur, quelle que soit son utilisation par l'acheteur d'origine ou d'un tiers.

L'utilisation de ce produit peut être contraire aux lois locales et nationales. De plus, soyez bien conscient que l'utilisation

adéquate et sans danger de ce produit relève de votre entière responsabilité.

Limitation de responsabilité

DANS LES LIMITES PERMISES PAR LA LOI, SENA EXCLUT POUR ELLE-MÊME ET SES FOURNISSEURS TOUTE

RESPONSABILITÉ CONTRACTUELLE OU DÉLICTUELLE (Y COMPRIS UNE NÉGLIGENCE) DE TOUT DOMMAGE

DIRECT, CONSÉCUTIF, INDIRECT OU PUNITIF DE QUELQUE NATURE QUE CE SOIT, OU POUR LA PERTE DE

REVENUS OU DE PROFITS, PERTES COMMERCIALES, PERTES D'INFORMATIONS OU DE DONNÉES OU TOUTE

AUTRE PERTE FINANCIÈRE RÉSULTANT DE OU EN RELATION À LA VENTE, L'INSTALLATION, L'ENTRETIEN,

L'UTILISATION, LA PERFORMANCE, LA PANNE OU L'INTERRUPTION DE SES PRODUITS, MÊME SI SENA OU SES

REVENDEURS AUTORISÉS ONT ÉTÉ AVERTIS DE L'ÉVENTUALITÉ DE TELS DOMMAGES, ET LIMITE SA

RESPONSABILITÉ À RÉPARER, REMPLACER OU REMBOURSER LE PRIX D'ACHAT PAYÉ, AU CHOIX DE SENA.

CET AVIS DE NON RESPONSABILITÉ POUR LES DOMMAGES NE SERA PAS AFFECTÉ SI UN RECOURS APPORTÉ

PRÉSENTEMENT N'ATTEINT PAS SON BUT ESSENTIEL. DANS TOUS LES CAS, LES RESPONSABILITÉS

D'INDEMNISATIONS TOTALES DE SENA OU DE SES AGENTS DE VENTE NE PEUVENT DÉPASSER LE PRIX PAYÉ

POUR LE PRODUIT PAR L'ACHETEUR.

Exonération de responsabilités

Outre les dommages pouvant survenir en raison de l'utilisation du produit, Sena n'est pas tenu responsable des

dommages du produit survenant en raison des situations suivantes.

● Dans le cas où il est fait mauvais usage du produit ou qu'il est utilisé dans un but autre que celui prévu.

● Dans le cas où le produit est endommagé car l'utilisateur ne suit pas le contenu du manuel du produit.

● Dans le cas où le produit est endommagé car il a été laissé sans surveillance ou a subi un autre accident.

● Dans le cas où le produit est endommagé car l'utilisateur s'est servi de pièces ou d'un logiciel n'étant pas fourni

par le fabricant.

● Dans le cas où le produit est endommagé car l'utilisateur l'a démonté, réparé ou modifié d'une manière ne

figurant pas dans le manuel du produit.

● Dans le cas où le produit est endommagé par un tiers.

● Dans le cas où le produit est endommagé en raison d'événements imprévisibles (y compris les incendies,

inondations, tremblements de terre, tempêtes, ouragans et autres catastrophes naturelles).

● Dans le cas où la surface du produit est endommagée pour cause d'usure.

Service de garantie

Pour faire valoir vos droits à un service de garantie du produit, envoyez le produit défectueux, à vos frais, au fabricant ou

revendeur accompagné de la preuve d'achat (un reçu indiquant la date d'achat, le certificat d'enregistrement du produit

du site internet et d'autres informations pertinentes). Prenez les mesures nécessaires pour protéger le produit. Afin

d'obtenir le remboursement ou le remplacement du produit, vous devez inclure la totalité du paquet comme au moment

de l'achat.

Service sans frais

Sena offre un service de réparation ou de remplacement sans frais du produit lorsque les défauts de produit rentrent dans

la limite de la garantie du produit durant la période de garantie.

| Snowtalk

Service payant

Sena offre un service de réparation ou de remplacement payant du produit lorsque la période de garantie du produit a

expiré ou lorsque les dommages causés au produit sortent du cadre de la garantie du produit. Pour de plus amples

informations sur le service payant, vous pouvez contacter le centre de services de Sena.

Renvoi pour remboursement total

Si vous n'êtes pas d'accord avec les conditions exposées ci-dessus, vous pouvez renvoyer le produit pour un

remboursement total. Pour obtenir le remboursement, vous devez renvoyer le produit au vendeur dans le même état

dans lequel il a été acheté, dans une période de 14 jours à compter de la date d'achat.

À moins de renvoyer le produit dans une période de 14 jours à compter de la date d'achat, vous aurez lu et accepté

l'ensemble des conditions exposées ci-dessus et Sena ne sera pas responsable de toute réclamation ou dommages

associés au produit.

v1.0

SENA www.sena.com User's Guide for Firmware v1.0

SENA TECHNOLOGIES SP18 BLUETOOTH STEREO SNOW HEADSET User Manual

Sena Technologies,Inc. BLUETOOTH STEREO SNOW HEADSET

User Manual

Navigation menu

Namespaces

Views

Navigation