SIMS Deltec 6330-51 User Manual Instruction Manual
SIMS Deltec, Inc. Instruction Manual
Contents
- 1. Instruction Manual
- 2. Actual Users Manual For Sims
Instruction Manual
MSJO-OSa-A VWraIeS Data Link Speeifitztion Page 2 1.0 SCOPE Summary A one-way RF data communications system that will notify a personal computer when message is received from a Legacy Pump, This system will have two parts: a transmitter and a receiver. The transmitter accepts a data string from a Legacy pump and transmits the data. The receiver demodulates the transmitted RF signal and forwards it to a personal computer, The CRC check code will accompany the transmitted data to insure communications integrityt A single receiver can be used to monitor up to 40 transmitters Block Diagram A one-way RF communications system with the following components (see the diagram below): 1, A microcontroller-based data encoder, 2. A discrete SAW-based transmitter including antenna 3, A dual SAW-based receiver module including antenna 4. An RS-232 interface to a personal computer, Personal Computer MS30-053-A Wireless Data Link Specification Page 3 Transmitter The Microcontroller will signal it is ready to receive data by transmitting an ASCII “R" to the pump indicating “Ready". The microoontroller will accept and buffer serial data. The transmitter will respond to the pump with an ASCII “B". Indicating “Busy”. The transmitter [keys ]will transmit the resultant packet several times at random intervals The diagram below shows a transmit data string. START #BYTES DATA DATA DATA DATA DATA DATA DATA- After the transmitter is finished transmitting the data, it will send an ASCII “R" to the pump. To indicate it is ready for the next packet, The Transmitter is powered from the pump communications port. The transmit frequency for US and UK applications is 418 MHz. The transmit frequency for all EC countries except the UK will be 433.92 MHz. The transmitter circuit can be used at all these frequencies with minor modifications. Receiver More than one receiver. with separate antennas, may be used This provides spatial diversity to improve communications integrity in cases where multipath signal cancellation can occurt Each receiver uses a small whip antenna and an RF Monolithics hybrid receiver module. These receivers use a SAW-based ASH architecture making them small, low cost and low power, The raw data output of both receivers is fonvarded to a personal computer via an RS-232 connection. Transmissions received correctly by either rece'wer will be sent to the computer. Transmissions received with CRC errors are discarded. MSSO-053-A ereless Data Link Spedflcafion Page 4 2.0 DOCUMENT CITATIONS AC Adapters Transmitters Receivers 3.0 ELECTRICAL REQUIRENIENTS 3.1. THE RECEIVER IS POWERED FROM A SIMS DELTEC AC ADAPTER. EACH AC ADAPTER CAN POWER UP To THREE RECEIVERS. CONNECT THE AC ADAPTER To THE RECEIVER CLOSEST TO THE COMPUTER. u.s. 71-0266 UK 71-0257 Euro 71-0268 JA 710273 VK 710274 3.2. DISTANCE TBD 3.3. ERROR RATE TBD 4.0 PHYSICAL REQUIREMENTS 4.1. DIMENSIONAL See drawings for device dimensions. 5.0 ENVIRONMENTAL 5.1. OPERATING ENVIRONMENT 0 Temperature: 2°C (35.6°F) to 40°C (104°F) - Humidity: 90% relative humidity maximum, non—condensing. - Atmospheric Pressure: 70 kPa (102 PSI or 10,000 feet above sea level) to 106 kPa (154 PSI). MSW-053A wireless Dan Link Spedfimfion Page 5 5.2. STORAGE ENVIRONMENT . Temperature: A20°C (-4°F) to 60°C (140°F) . Humidity: 90% relative humidity maximum, non-condensing o Atmospheric Pressure: 70 kPa (102 PSI or 10,000 feet above sea level) to 106 kPa (1544 PSI),
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 1999:11:03 15:07:14 Creator : Photoshop PDF Plug-in 1.0 Producer : Photoshop PDF Plug-in 1.0 Create Date : 1999:11:03 15:06:19 Page Count : 4EXIF Metadata provided by EXIF.tools