SKYRC Technology SOKAR FPV DRONE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2854996
Application ID	rwPDsDgkJ1Gnft3+JWcEKA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	172.86kB (2160808 bits)
Date Submitted	2015-12-23 00:00:00
Date Available	2015-12-23 00:00:00
Creation Date	2015-12-16 13:28:40
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2015-12-21 16:16:10
Document Title	Users Manual
Document Creator	CorelDRAW X6
Document Author:	DZP

SOKAR
FPV DRONE
Quick Start Manual
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
RoHS
2015 SkyRC Technology Co., Ltd. All Rights Reserved.
Version 1.0
7504-0694-01
TABLE OF CONTENTS
INTRODUCTION
INTRODUCTION
01
FPV QUADCOPTER
01
REMOTE CONTROLLER & FPV MONITOR
02
CHARGER
03
PACKAGE CONTENTS
03
CHARGING BATTERY
04
ATTACHING PROPELLERS
05
ATTACHING CLOVERLEAF ANTENNA
06
INSTALLING BATTERY
06
ATTACHING MONITOR TO REMOTE CONTROLLER
07
CHARGING FPV MONITOR
08
SWITCH ON/OFF REMOTE CONTROLLER AND MONITOR
08
SETTING CHANNEL FREQUENCIES
09
SWITCH ON/OFF THE SOKAR DRONE
09
ALL DONE READY TO FLY
10
STARTING THE MOTORS
10
STOPPING THE MOTORS
10
CONTROLLING DRONE MOVEMENT
11
SPECIFICATIONS
12
SAFETY PRECAUTIONS AND LIABILITY EXCLUSION
13
WARRANTY AND SERVICE
13
Congratulations on your choice of the SkyRC Sokar FPV Drone. This is a high
performance quadcopter with FPV camera, video transmitter, video monitor and
remote controller. LiPo battery and charger are included also. You just need to
recharge your battery and FLY.
Let’s meet your Sokar FPV Drone now.
Please review the illustrations below for a full list of your Sokar FPV Drone parts.
FPV Quadcopter
Battery Connector XT60
Antenna
5” Propeller
3S LiPo Battery
5.8G Video Transmitter
Left LED Light
FPV Camera Len
Right LED Light
ON/OFF Switch
Brushless Motor
Canopy
R-Clip
SOKAR FPV DRONE
01 ·
REMOTE CONTROLLER & FPV MONITOR
CHARGER AND PACKAGE CONTENTS
LiPo Battery Charger
Remote Controller & FPV Monitor
AC 100-240V
Power Jack
4.3" LCD Monitor with
8 Channel Receiver
5.8G Antenna
Responsiveness Switch
Left Stick
ON/OFF Switch
for Monitor
Throttle Trim
Yaw Trim
Cell 1 LED Indicator
Cell 2 LED Indicator
Cell 3 LED Indicator
Hanging Ring
Stabilization Switch
Bind Key
Right Stick
Pitch Trim
Roll Trim
LED Indicator
ON/OFF Switch
for Remote Controller
3-Cell Balance Port
2-Cell Balance Port
Package Contents
Handle
Sokar FPV Drone
2.4G Antenna
Canopy
5.8G Video Transmitter
Cloverleaf Antenna
Propellers x 8 pcs
Trainer jack
Dipswitch for
frequency setting
4.3" LCD FPV Monitor
Antenna for Monitor
2.4G Remote Controller
LiPo Battery Charger
3S LiPo Battery 2000mAh
AA Battery x 4
Battery Compartment
(4 x AA Battery)
USB Port for
Battery Charging (5V IN)
Video Out
· 02
SOKAR FPV DRONE
SOKAR FPV DRONE
L Wrench
03 ·
CHARGING BATTERY
ATTACHING PROPELLERS
Charging Battery
SKYRC e3 charger comes with the built in power supply. You can connect the AC power cord to
the AC socket (100-240V AC) directly.
Please refer to following steps to charge the battery,
1) Insert the AC power cord into the charger.
2) Insert the AC plug into a wall socket (100-240V). All LEDs will light green and flash red to
indicate the charger is ready to charge.
3) Connect battery balance wire to balance port which is in front side of the charger,
 after 2
seconds, the charger detects the voltage of the battery and starts to charge.
4) The charger starts charging. The LEDs will glow constant red. If the battery pack is 2-cell,
Cell 1 and Cell 2 LEDs will glow constant red; if the battery pack is 3-cell, Cell 1, Cell 2 and
Cell 3 LEDs will glow constant red.
5) When a cell is completely charged, its corresponding LED will glow constant green. A 2-cell
pack is fully charged when LEDs 1 and 2 are constant green. For 3-cell pack, all LEDs will
glow constant green to indicate the pack is fully charged.
6) Unplug the battery from the charger and the charge status LED will stay green and flash red
which indicates the charger is ready to charge another battery.
Remark:
1 If you unplug the battery while charging, the charger will stop charging automatically and
enter into standby status.
2 If the charger encounters overload or short circuit while charging, the charger will stop
charging and three LEDs will flash red.
LED Indicator
LED Indicator
Cause of Error
All LEDs flashes red once and stop 1 second in cycle. The battery connects incorrectly.
All LEDs flashes red twice and stop 1 second in cycle. The charger encounters overload or short circuit.
All LEDs flashes red four times and stop 1 second in cycle. The voltage of single cell is too high or too low.
There is a 300mv difference of voltage
All LEDs flashes red six times and stop 1 second in cycle. between
battery pack.
Attaching Propellers
Silver Nut
Black Nut
Charger Status
LED stays green and flashes red.
The charger is ready to charge.
LED glows constant red.
The charger is charging.
LED glows constant green.
The charging process finishes.
Black Nut
Silver Nut
To attach the propellers correctly, you need match the spin direction on the propellers with
the marking on each arms.
Charger
Charging
Port
for
3S
LiPo
Battery
* Error Message for Charger
If the charger encounters a problem, all LEDs will flash red to alert you the errors. In this case,
please disconnect the power cord from the wall socket and unplug the battery from the charger.
Charging
Port
for
2S
LiPo
Battery
L-Wrench
3S
LiPo
Battery
CAUTION:
CONNECTION DIAGRAM
This diagram shows the correct way to connect your battery to the e3 charger while charging.
Failure to connect as shown in this diagram will damage this charger.
· 04
SOKAR FPV DRONE
Hold the motor in place with one hand, then using L-Wrench and turn in opposite direction to
secure the propeller.
SOKAR FPV DRONE
05 ·
ATTACHING ANTENNA AND BATTERY
ATTACHING MONITOR TO REMOTE CONTROLLER
Attaching Cloverleaf Antenna
Attaching Monitor to Remote Controller
Installing Battery
Install 4 x AA Battery
· 06
SOKAR FPV DRONE
SOKAR FPV DRONE
07 ·
SETTING CHANNEL FREQUENCIES
CHARGING FPV MONITOR
Charging FPV Monitor
Using micro USB charging cable(not
included) to charge the FPV monitor.
During the charging process, the
charging status LED indicator will
turn red. When battery is fully
charged, the LED indicator will turn
green.
Responsiveness Switch
Stabilization Switch
Monitor ON/OFF
LED Indicator
For the advance user, you can turn responsiveness switch to fast and turn stabilization switch to low.
The drone will be more agile and responsive.
Charging Status
LED Indicator
Setting Channel Frequencies
The channel frequencies on the transmitter must be equal to the monitor.
The frequency of the channel in the 5.8GHz video transmitter and FPV monitor are set by a
total of three (3) dipswitches. The 4th dipswitch is not used for channel selection. Please refer
to the below pictures for the channel frequencies and corresponding dipswitch settings:
Switch ON/OFF Remote Controller and Monitor
ON
OFF
1234
Dipswitch on the transmitter
Dipswitch on the
back of monitor
It is highly recommended to understand the rules and regulations in your country before using
Sokar FPV Drone. Transmitting outside a legal band is something prohibited by authorities and
may result in a fine or confiscation of equipment.
Switch ON/OFF the SOKAR DRONE
Slide power switch up to turn
remote controller power ON,
the LED on the remote controller
will turn green.
· 08
Push the ON/OFF button to turn the
monitor ON.
Push and hold ON/OFF button for more
than 5 seconds to turn it OFF.
SOKAR FPV DRONE
Push the ON/OFF button located on the
left side to turn ON the Sokar FPV Drone.
ON/OFF switch
Push and hold ON/OFF button for more
than 5 seconds to turn it OFF.
SOKAR FPV DRONE
09 ·
ALL DONE READY TO FLY
CONTROLLING DRONE MOVEMENT
Controlling Drone Movement
ALL DONE READY TO FLY
This section explains how to control the orientation of the Drone through the remote controller.
The remote control is Mode 2.
Safety Precautions
The Sokar FVP Drone is not a toy. It is not suitable for using by any children under 14
years of age. During the flying, the propellers of Sokar FPV Drone could cause injury
to people, animals and property. Do not touch Sokar FPV Drone when propellers are
spinning and wait until the propellers have completely stopped before handing it.
Do not fly your FPV Drone over any public area, such as beaches, stadiums,
populated parks, or other people’s backyards and private areas. Do not fly near airport.
In some country, you need get appropriate authorisation from local government before
your flying.
up
Flying upwards or downwards
down
Starting the Motors
A combination stick control is used to start the motors. Push both sticks to the bottom inner corners to
start the motors.
Yawing
(rotating towards left or right)
Stopping the Motors
When the drone has landed, hold the throttle down. The motors will stop after ten seconds.
Pitching
(moving onwards or backwards)
Rolling
(turning towards left or right)
· 10
SOKAR FPV DRONE
SOKAR FPV DRONE
11 ·
SPECIFICATIONS
SAFETY PRECAUTIONS & WARRANTY AND SERVICE
Flight Controller
IMU
Invensense 6050, 3 Axis Gyro, 3 Axis Accelerometer
CPU
STM32F031K4 32-bit ARM Processor
Size
222 mm
Video Tx
Transmitter Module
5.8GHz Module
Channels
6 Programmed via Dipswitch
Frequency
5845, 5825, 5805, 5785, 5765, 5745 Mhz
Power Output
25mW
Antenna
Cloverleaf Antenna
173 mm
112 mm
74 mm
Safety Precautions and Liability Exclusion
Power System
Propellers Size
5”
Brushless Motors
2204-2300KV
Battery
LiPo 2000mAh 3S 30C
ESC Rating
12A continuous, 17A peak
Sokar FPV Drone is NOT a toy. It is not suitable for using by any children under 14
years of age. It is a race quad and not come with GPS hold, and it does require a fair
amount of skill to pilot it.
A warning that batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
The propeller can do some serious injury to human body. So when you setting up the
drone, it is highly recommended to REMOVE ALL PROPELLERS.
Flight Characteristics
Flight Time
12 Minutes, Also Depends Upon Flight Style
Keep in mind that there is always a chance that propellers spin up unexpectedly.
Maximum Range
Highly dependent on battery, and flying style
SkyRC accepts no responsibility or liability for any injury or damage to a person or
property caused by the use of Sokar FPV drone.
Video Camera
Warranty and Service
Sensor
300,000 Pixel
Lens
FOV (Field Of View) 135°
We guarantee this product to be free of manufacturing and assembly defects for a period of one
year from the time of purchase. The warranty only applies to material or operational defects,
which are present at the time of purchase. During that period, we will repair or replace free of
service charge for products deemed defective due to those causes.
Size
4.3" TFT LCD
Resolution
480x272
This warranty is not valid for any damage or subsequent damage arising as a result of misuse,
modification or as a result of failure to observe the procedures outlined in this manual.
Channel
6 Channels
Frequency
5845, 5825, 5805, 5785, 5765, 5745 MHz
FPV Monitor
The warranty service is valid in China only.
Weight and Size
Weight(FPV Drone)
405g(without battery)
Weight(Remote Controller)
614g
· 12
If you need warranty service overseas, please contact your dealer in the first instance, who is
responsible for processing guarantee claims overseas. Due to high shipping cost, complicated
custom clearance procedures to send back to China. Please understand SKYRC can't provide
warranty service to overseas end user directly.
If you have any questions which are not mentioned in the manual, please feel free to send email
to info@skyrc.cn
SOKAR FPV DRONE
SOKAR FPV DRONE
13 ·
FCC NOTE
FCC NOTE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO
THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.
· 14
SOKAR FPV DRONE
SOKAR FPV DRONE
15 ·

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : DZP
Create Date                     : 2015:12:16 13:28:40+08:00
Modify Date                     : 2015:12:21 16:16:10+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : DZP
Title                           : 未命名 -1
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2015:12:21 16:16:10+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:b50471d0-8daf-4390-834b-280c3a13a907
Instance ID                     : uuid:19f72911-e2ae-4776-8f4b-e3f0a1bb3794
Page Count                      : 9
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools