SRM Service Center PC6 PowerControl 6 User Manual

SRM Service Center, Inc. PowerControl 6 quick start manual

a href="https://usermanual.wiki/SRM-Service-Center" itemprop="url"> SRM Service Center >

Exhibit 8

PowerControl VI: Getting Started 29 May 2008 1 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. 6 D-52428 Jülich Tel.: +49 (2461) 69123-0 Fax:+49 (2461) 69123-17 SRM Service Center Inc. 720 West Monument Street Colorado Springs, CO 80904 USA Tel.: +1 (719) 266 4127 Fax: +1 (710) 266 4284 www.srm.de Press for 10 seconds to activate Sleep Mode. The PowerControl VI will not enter Sleep Mode while it is receiving data from and of the sensors. The PC VI shows the date of the Firmware Release being used. (17.04.2008) Press to wake up the PC VI. The main menu shows real-time data as the athlete trains. Press to change between the different information modes on your display. Real-time training data Menu: • Top Line: Training time, distance [miles or km], altitude [feet or m] or all three alternating. (Settings for information which is shown can be changed in the SRM Windows Software). • Middle Line: Power [Watt] (> 1000W, 1.0 = 1000W), Heartrate [bpm] • Bottom Line: Training zone, Speed [km/h or miles/h], Cadence [rpm] If no signal from a sensor is picked up, the display shows “-“ for this data instead of a number (for example “-“ speed if the speed sensor is not working). Average training data Menu: • Top Line: Training time, distance, ascending altitude or all three alternating. • Middle Line: Power, Heartrate • Bottom Line: Speed, Cadence Maximum training data Menu: • Top Line: Mechanical energy uptake in kilojoules (kJ) (Estimating an efficiency of 25% riding the bike, this is approximately the same as the total energy burned by the athlete in kcal) • Middle Line: Power, Heartrate • Bottom Line: Speed, Cadence Time/Date Menu • Top Line: Time of day • Middle Line: Day, Month • Bottom Line: Year, temperature in Celsius or Fahrenheit Main Menu: PowerControl VI Sleep Mode
PowerControl VI: Getting Started 29 May 2008 2 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. 6 D-52428 Jülich Tel.: +49 (2461) 69123-0 Fax:+49 (2461) 69123-17 SRM Service Center Inc. 720 West Monument Street Colorado Springs, CO 80904 USA Tel.: +1 (719) 266 4127 Fax: +1 (710) 266 4284 www.srm.de You need to pair the PowerControl VI with the power, speed and heartrate sensors. If you don’t do this, no data will be received by the PowerControl VI for any of the sensors that you want to use on your bike. Pairing the sensors with the PowerControl VI will only be possible if they are switched on. •Switch on the PowerMeter by pedaling the crank backwards a few times(it will switch on when sensor in the PowerMeter passes the magnet attached to the bottom bracket). • Switch on the Speed sensor by spinning the wheel. • Switch on Heart Rate sensor by putting the belt on your chest. To have a better contact please moisten the electrodes. • Switch on the PowerControl by pressing the button. Hold for about 3 seconds to enter Sensor Pairing mode. Press once quickly to select the device you want to pair and press once quickly to tell the PC VI to start searching. The Antenna symbol blinking on the right of the display shows that the searching process has started. The search bar in the middle of the display shows the progress of the search. If no signal is picked up, please check: • If the sensor is switched on • The position of the magnet • If the battery is charged • If it is still not working, please get in touch with the Service Center If a Sensor is found, the PC VI will show “Found” in the Top line, alternating with the Sensor’s Serial number. If the pairing fails, please repeat step 1 and 2. To pair another Sensor, press once quickly to get back to the device selection Menu. Continue with pairing the Heartrate sensor and Speed sensor. Hold for about 3 seconds to leave the device pairing menu and go back to the main menu. It is also possible to program the sensor identification numbers in the SRM Windows Software. This will make the pairing unnecessary. Sensor Pairing
Download:
Mirror Download [FCC.gov]
Document ID957492
Application ID7DD54aNSBYkhL49ezv+9aQ==
Document DescriptionExhibit 8
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize176.19kB (2202335 bits)
Date Submitted2008-06-18 00:00:00
Date Available2008-06-18 00:00:00
Creation Date2008-05-30 15:22:25
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2008-06-18 10:40:44
Document Titlequick_start_manual.pdf
Document CreatorAdobe Acrobat 8.0
Document Author: prosenland
FCC ID Filing: WCS-PC6

Navigation menu