ST Electronics MA-WIFI-AZ-V1 MA_WiFi User Manual AZTECH SYSTEMS LTD

Download:
Mirror Download [FCC.gov]
Document ID	2921158
Application ID	P2wfLj3lU7DXIo2LQwx+0Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.41kB (280130 bits)
Date Submitted	2016-03-07 00:00:00
Date Available	2016-03-08 00:00:00
Creation Date	2016-03-07 16:00:07
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-03-07 16:00:07
Document Title	AZTECH SYSTEMS LTD
Document Creator	Microsoft® Word 2010
Document Author:	hlyap

Index
1.0
OVERVIEW…………………………………………………………………………….2
2.0 CONNEC TION…… ……… ……… ……… ……… ………… ……… …… ...… …..2
3.0
WIRELESS SPECIF ICATIO NS…..………………………………………….…….....2
 Protocol/Standards
 Frequency Band
 Total Num. of Channel
 Wireless transmission range
 Frequency Band
4.0
PHYSICAL SPECIF ICATIONS……………………………………………………....2
 Dimension
 Weight
5.0
ENVIRONMENTAL…………………………………………………………………...2
6.0
APPROBATIONS………………………………………………………………..……..3
OVER VI EW
1.0
The ST MA_WIFI(AZ) is a 300Mbps 2x2 dual-band (2.4/5GHz) wireless module. This
module is powered by 5V DC
2.0
3.0



CONNECTION
2 x RJ45 for 10/100 Ethernet
1 x D-SUB9 miniature connector
1 x Header(2x15 2mm pitch) to connect to Processing board
WIR ELESS SPECIFIC ATION S
Protocol/Standards
 Wireless
o IEEE 802.11a/b/g/n

Ethernet
o IEEE 802.3 10/100 Ethernet
o IEEE 802.3az support
Frequency Band
 2412 ~ 2462 MHz
 5150 ~ 5250 MHz
 5725 ~ 5850 MHz
Total Num. of Channel
 24
Wireless transmission range:
 15 Meter
4.0
PHYSIC AL SPECIFIC ATION S
Dimension
 90(L) mm x 78(W) mm x 19(H) mm
Weight
 150g
5.0
ENVIRONMENTAL
Temperature
Operating
Non-Operating
Humidity
Operating
Non-Operating
0o to 50 o Celsius
32o to 122 o Fahrenheit
-25 o to 70 o Celsius
-13 o to 158 o Celsius
10% to 90% Relative Humidity (Non-Condensing)
10% to 90% Relative Humidity (Non-Condensing)
6.0
APPROBATION S
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules.
This device is intended only for OEM integrators under the following conditions:
1)
The antenna must be installed such that 20cm is maintained between the antenna and
users, and
2)
The transmitter module may not be co-located with any other transmitter or antenna,
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and
the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a
separate FCC authorization.
End Product Labelling
The final end product must be labelled in a visible area with the following:
“Contains FCC ID: 2AG7N-MA-WIFI-AZ-V1”.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module.
NOTE: Specifications subject to change without prior notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-SG
Tagged PDF                      : Yes
Title                           : AZTECH SYSTEMS LTD
Author                          : hlyap
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:03:07 16:00:07+08:00
Modify Date                     : 2016:03:07 16:00:07+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools