SYMA MODEL AIRCRAFT SYMA20160630 RC DRONE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3150141
Application ID	nIm8GhkJGI4jRvJrZDX4LQ==
Document Description	User Manual - Pages1-10.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	450.8kB (5634947 bits)
Date Submitted	2016-09-28 00:00:00
Date Available	2016-09-28 00:00:00
Creation Date	2017-12-15 10:41:48
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-15 10:41:48
Document Title	Users Manual
Document Creator	Adobe Illustrator CC 2014 (Macintosh)

D 2 m...
[lfilflfllfls
4C” 2.46 REMOTE CONTROL QUADCOPTER
h IMPLEMENT STANDARD: GB/T26701-2011
Main characteristics
0 Four»axis structure is applied,which makes the quadcopter more flexible and rapid
when fIying.It has the characteristics of wind-resistant and can be flied indoor or
outdoor.
o Built-in 6 axis gyroscope for precise hovering in the sky.
0 Modular design structure is applied. more simple for assembly and convenient for
maintenance,
0 With 360°3D eversion function and throwing flight function .
The materials and specification mentioned in this instruction manual or the parts
inside this package is for reference only.Our company won't be responsible for any
adaption of the outer packageNor shall we keep our customers informed in advance.
Any information updates or changes,p|ease be subject to our website .
Instructions for use
1)Age classification: not suitable for children under 3 years of age
2) Before first use: read the user's information together with your child.
3) Flying the quadcopter requires skill and children must be trained under the direct
supervision of an adult,
4) For toys intended to be assembled by the child: Check if the toy is assembled
as instructed. The assembly shall be performed under the supervision of an
adult.
5) Hands, hair and loose clothes shall be kept away from the propeller (rotor).
6) Do not change or modify anything on the quadcopter!
7) Caution! The quadcopter should not be started when persons, animals or any
objects are within the flying range of the quadcopter.
8) Do not throw or hold any objects in the rotating rotor
Safety regulations
. Please put smaller parts of the aircraft in the place where children can't reach,
avoiding from accidents.
. Power of this aircraft is adequate. Therefore, when flying for the first time, it
should push remote controls right/left variable-speed joystick slowly, avoiding
from collisions caused by rising aircraft rapidly.
.Afier flying, it should turn off remote controls power supply and come close to
the aircraft to turn off its power supply.
. Please don’t put battery in high-temperature and heated places(such as fire or
nearby electric heating devices).
. When the aircraft flies, it should maintain 2-3 meters from the user or others,
avoiding from crashing into others” head, face or body when it lands.
. When children operate the aircraft, they should be accompanied with the adult
and guided by the adult. Ensure that the aircraft is controlled within the range
of operator’s (or instructor's) visibility. It is convenient for controlling,
. Non-rechargeable battery can't charge. As installing or changing battery,
pleasepay attention to the polarity. Don’t use a mixture of old and new battery
or batten! with different types.
. When it isn't used, it should turn off remote power supply of remote control and
aircraft, respectively, and take out the battery in remote control.
, Power supply terminal can't be short circuit.
Maintenance
1. Use clean soft cloth to clean this product frequently.
2. Avoid from exposure or heating in the sun.
3. Don’t put the toy in the water. Otherwise, it'll damage electronic parts.
4. Please check the plug and other accessories at regular intervals. If there
is any damage, please stop using it immediately until it is repaired completely.
About contents
Product included following contents:
0 Quadcopter
- 246 Remote controller
-USB charging wire
0 Instruction manual
- Blade(4 pieces)
Get to know your transmitter
Introduction of transmitter Remote control Installing
HIgI’l/LUW ON/OFF the battery
Speed switch power and lndlcator
Le“ ~ — an Everslon
conntrol xv A Right y~
lever ._ comm, Battery Cover
g - lever J
“mm“ Forward and r. s
. r
m 4X1 5V Batteries
Open the back cover at the back of the transmitter. Load 4PCS “AA”aIkaline
batteries correctly into the batten! compartment as per the correct polarity
shown on the battery compartment.
&resellmg backward
. ‘ trimmer
Lefi finertunmg Rtght flne-tunlng
1 Install baltertes wtlh correct polarity
A 2 Do not mlx old and new batteries.
3.Do not mtx different types of battertes.
Controller modes & instructions
With the purpose of satisfying operational habits of different
consumers, this remote control sets up two kind of different
operation modes: Mode 1 and Mode 2. When starting. press
on the Key A and switch Mode 1 and Mode 2. while turning on
remote control's power supply simultaneously.
Illustration on controlling the QUAD COPTER
(Mode 1, Defaulted mode when starting)
Operating direction
Push the throttle up or down, the
quadcopter flies upward or downward.
Push the direction lever up or down,
the quadcopter flies forward or
backward.
Pull the throttle left or right, the
quadcopter turns to left or right.
Fine-tuning operation
Pull the direction lever left or right,
the quadcopter flies to left side or
right side.
//
When the quadcopter When the quadcopter When the quadcopter
keepsflying forward / keepsflying to left/ right keepsrotating to left/
backward. youcan correct side. youcan correct it by right, you can Correct it
it by pressing fine-tuning pressing theFine-tuning by pressing the fine-
button down I up, button right I left. tuning button right / left.
Illustration on how to co trol the QU
Operating direction
COPTER (Mode 2)
Push the throttle up or down, the
quadcopter flies upward or downward.
Push the direction lever up or down,
the quadcopter flies forward or
backward.
Pull the direction lever left or right,
the quadcopter turns to left or right.
Fine-tuning operation
Pull the throttle left or right, the
quadcopter flies to left side or right
side.
a? '
070 '>~'
‘sgfi’tv‘
é—{V - ~
When the quadcopter
keepsflying forward /
backward, youcan correct
it by pressing fine-tuning
button down / up.
When the quadcopter
keepsflying to left / right
side, youcan correct it by
pressing theFine-tuning
button right / left.
When the quadcopter
keepsrotating to left /
right, you can Correct it
by pressing the fine-
tuning button right/ left.
Ready to fly your quadcopter
1: First of all, press the ON/OFF power switch.
2:Turn on the quadcopter button,and place the
quadcopter on horizontal position .
3: Push the throttle lever to the highest position and
then pull it back to the lowest position,this time
there will be one clear sound sending out from
the transmittemhis shows that the quadcopter
has entered into the pre-fly state.
TIPS: When matching signal. keep the
quad copter on horizontal position
Hmlz vntal to fast matching and start a stable
Dust m" .
VIIIIIIIIIIIIIIIIIIA "lg ht-
1.When the indicator of the transmitter appears eternal bright.hdwever, the
indicator of the helicopter appears slow flashing. this means that decoding is
not successful. This time please disconnect the power both of the quad
copter and transmitter, then repeat the pre-flying steps.
2.|f the quadcopter is tilting to one side abruptly or spinning while hovering,
please switch off the power both of the quad copter and transmitter and then
repeat the pre-flying steps.
3.When the indicator of the quad copter keeps flashing slowly. it means that the
quad copter has entered into the low voltage protection state.This time you
need to charge the quadcopter.
Function introduction
1.Low-vo|tage protection:
When four indicator lights on the bottom
of aircraft start to flicker, it means electric
quantity of the aircraft is insuflicient. Please
control the aircraft to make a return voyage.
2.Low-vo|tage protection:
When four indicator lights on the bottom of
aircraft start to flicker. it means electric
quantity of the aircraft is insufficient.
Please control the aircraft to make a
return voyage.
3.Horizonta| correcting function:
Place the quadcopter on a horizontal postion,
then push transmitter both left and right lever
to lowest right conner for about 2-3 second ,
indicator on the quadcopter changed from
normal lights up to quickly flashing ;After 2-3
second ,the indicator changed to normal lights,
it means the quadcopter restarted [reset successfully.
4.3D eversion:
When you are familiar with the basic operation,
you can do some awesome& exciting tricks and
stunts! First of all,fly the aircraft to a height of
more than 3 meters, press the 3D Eversion
switch on the rear right side of the transmitter,
then push the right rudder(in any direction)
to make 360 degree flip.
5.Throwing flight instructions:
Using 6 axis gyroscope, quadcopter
bring you more fun. Throw out the
quadcopter or push up throttle lever
when it rolling, the quad-copter could
hover smoothly in the sky.
6.Speed gear’s switch function:
Low Speed: Press the High/Low speed switch
for one time, the buzz will send out
one sound.
High Speed: Please press High/Low speed switch
once again, the buzz will send out
two sounds.
7.Mode switch function:
Keep pressing the button A,then switch on
power of the transmitter,you can select Mode 1
or Mode 2.
8.Resetting function:
Keep pressing the button B,then switch on
the power of the transmitterEnter into the
Trimming 8. Resetting Mode(lt is highly
suggested that the freshman should reset the
trimmer first before starting the first flight.)
Battery charging
Battery charging
Take out the USB charging wire. connect one end to the quad copter. then insert
the USB port of the USB charging wire to the USB port of the computer (or the
USB port of the power adapter) to charge the batteryDuring the time of charging,
the red indicator of the USB will be OFF.
When it is fully charged, the red indicator will be ON.
Caution:
1.When using the computer for charging,
please remember to pull out the
charging line before shutting down
the computer.
2.Please pay attention to aim correctly
to the correct polarity when connecting
the USB wire with the batteryPlease make
sure the polarityshould not be upside down.
Charging time: a
CAUTIONS WHEN CHARGING
1.When charging,please put this product on the dried or ventilated area and
keep it far away from heat source or explosive product.
2.When charging, please remove the batteries from the quad copter.A|I the
charging process should be under the guidance of the adult so as not to
cause accident.
3.When finish flying, please do not charge the battery which surface
temperature is still not cooled down.Otherwise it may cause swollen battery
or even cause fire disaster.
4.During the process of battery charging, falling down or striking by the outer
force should be avoided.0therwise it may cause short-circuited within the
battery and thus may cause danger.
5.In order to make sure safety. please make sure that you need to use the
original USB charging wire that made from our factory. When the battery is
used for a long time or appears aging or swollen.please replace them timely.
6.When the batteries are fully charged. if you do not remove it from the charger
for a long time. the battery may discharge automatically. which may cause
battery exhaustion. When the battery voltage that the charger has tested is
lower than the rated voltage. the charger will re-charge the batten! until it is
fully charged. Charging or discharging too often or repeated charging or
discharging may reduce the using life of the batteries.
BATTERY REPAIR & MAINTENANCE
1. Battery should be put in the dried or ventilated place with environment
temperature about 18-25 C.
2.In order to enhance the using life of the battery. please avoid repeat charging
or excessive discharging.
3.When the battery needs to be stored for a long time, please charge the
battew firstThat is to say. charge the battery for about 50-60% of the volume
and then well store it.
4.lf you do not use it for more than 1 months. it's highly recommended that you
need to check the battery voltage every month so as to make sure the voltage
no less than 3V. Othewvise please do by following No.(3) mentioned.
Maintenance procedure
Problems Causes Solutions
1. Aircraft enters inlo Iow-vollege
protecliori. 1. Charge (he airmail.
A‘rcrafl has 2. Eleclric quanlily ol remole control is 2. Change remote controls battery.
no response insulfiCienl, power indicator light Win 3. Adjust channels ol remote control
flicker. and aircrafl. and make them become
. Channel seleclion ol remole control consistent.
is inconsistent with aircraft‘s match
codes.
1. insumcient remote controls electric 1. Battery replacement.
quantity. 2. Change the place where has no
2. Remote control with the same transmitting interference or the
frequency is transmitting interference. same frequency.
Aircrafl’s flying
response is
insensitive
When hovering, . 1. Conduct horizontal correction, as
side flight is - Have "0 honzonlal correcliofl- shown in p. 6t3)(ccrrecting lunction)
formed
Spare parts
Here are alternative accessories. In order to provide convenience
for customer purchasing, every component are marked. Accessories
can be purchased from local deader. Please specify the color when
purchasing.
Fuselage-red Fuselage-black Fuselage-white Fuselage-green
Dzfls
Circuit board

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2015:07:21 20:54:12+08:00
Creator                         : Adobe Illustrator CC 2014 (Macintosh)
Modify Date                     : 2016:09:28 10:11:32-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : X12S英法说明书
Metadata Date                   : 2016:09:28 10:11:32-04:00
Creator Tool                    : Adobe Illustrator CC 2014 (Macintosh)
Thumbnail Width                 : 216
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 25402 bytes, use -b option to extract)
Instance ID                     : uuid:ad53b4d5-9179-48c0-bb3a-90c613d5bdfd
Document ID                     : xmp.did:438ccbed-2d92-4c08-912d-59af222a5fa3
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:d71af557-3526-ad40-be73-b2fc0187ea43
Derived From Document ID        : xmp.did:cc182d04-03d2-494d-a493-72123651e1cc
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:cc182d04-03d2-494d-a493-72123651e1cc, xmp.iid:438ccbed-2d92-4c08-912d-59af222a5fa3
History When                    : 2015:07:21 12:11:07+08:00, 2015:07:21 20:53:59+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Macintosh), Adobe Illustrator CC 2014 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/11.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/10.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/09.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/08.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/07.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/06.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/05.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/04.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/03.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/02.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/01.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/00.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-8.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-7.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-6.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-5.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-3.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-2.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-1.tif
Manifest Reference Document ID  : xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b
Manifest Reference Instance ID  : xmp.iid:7BAD4DE63A2068118083F748106C7E52, xmp.iid:D1114BA8102068118083F748106C7E52, xmp.iid:CF114BA8102068118083F748106C7E52, xmp.iid:CE114BA8102068118083F748106C7E52, xmp.iid:CD114BA8102068118083F748106C7E52, xmp.iid:FC7F1174072068118083F748106C7E52, xmp.iid:FD7F1174072068118083F748106C7E52, xmp.iid:FF7F1174072068118083F748106C7E52, xmp.iid:CC114BA8102068118083F748106C7E52, xmp.iid:7AAD4DE63A2068118083F748106C7E52, xmp.iid:CA114BA8102068118083F748106C7E52, xmp.iid:79AD4DE63A2068118083F748106C7E52, xmp.iid:7CAD4DE63A2068118083F748106C7E52, xmp.iid:7DAD4DE63A2068118083F748106C7E52, xmp.iid:0580117407206811808399334E532692, xmp.iid:7EAD4DE63A2068118083F748106C7E52, xmp.iid:6A7668E5162068118083E89327A99530, xmp.iid:0780117407206811808399334E532692, xmp.iid:687668E5162068118083E89327A99530
Ingredients File Path           : /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/11.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/10.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/09.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/08.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/07.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/06.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/05.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/04.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/03.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/02.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/01.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/X12说明书英/00.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-8.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-7.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-6.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-5.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-3.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-2.tif, /Volumes/服务器/工作文件夹/司马2015/美国SHERMAN/X12S（B273）/说明书/T5160 X-BUZZZ_notice-1.tif
Ingredients Document ID         : xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:9EDB50C39DA2E41193A6E452E041886C, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:615CC2FD19A2E4119830A0269DCA1F14, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, xmp.did:9CDB50C39DA2E41193A6E452E041886C, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b, uuid:9c3ab1f6-222f-4635-a795-2d2e1dc1175b
Ingredients Instance ID         : xmp.iid:7BAD4DE63A2068118083F748106C7E52, xmp.iid:D1114BA8102068118083F748106C7E52, xmp.iid:CF114BA8102068118083F748106C7E52, xmp.iid:CE114BA8102068118083F748106C7E52, xmp.iid:CD114BA8102068118083F748106C7E52, xmp.iid:FC7F1174072068118083F748106C7E52, xmp.iid:FD7F1174072068118083F748106C7E52, xmp.iid:FF7F1174072068118083F748106C7E52, xmp.iid:CC114BA8102068118083F748106C7E52, xmp.iid:7AAD4DE63A2068118083F748106C7E52, xmp.iid:CA114BA8102068118083F748106C7E52, xmp.iid:79AD4DE63A2068118083F748106C7E52, xmp.iid:7CAD4DE63A2068118083F748106C7E52, xmp.iid:7DAD4DE63A2068118083F748106C7E52, xmp.iid:0580117407206811808399334E532692, xmp.iid:7EAD4DE63A2068118083F748106C7E52, xmp.iid:6A7668E5162068118083E89327A99530, xmp.iid:0780117407206811808399334E532692, xmp.iid:687668E5162068118083E89327A99530
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 144.998722
Max Page Size H                 : 215.000417
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Cambria
Font Family                     : Arial, Cambria
Font Face                       : Regular, Regular
Font Type                       : Open Type, TrueType
Font Version                    : Version 5.06, Version 5.93
Font Composite                  : False, False
Font File Name                  : Arial.ttf, cambria_0.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 11.00
Page Count                      : 10

EXIF Metadata provided by EXIF.tools