SZ DJI TECHNOLOGY WM331S1801 Phantom 4 Pro V2.0 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3784982
Application ID	+Nf+yJ7Xsc5FQR38ErR64w==
Document Description	User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92.41kB (1155082 bits)
Date Submitted	2018-03-16 00:00:00
Date Available	2018-04-30 00:00:00
Creation Date	2018-05-24 19:24:22
Producing Software	GPL Ghostscript 9.21
Document Lastmod	2018-05-24 19:24:22
Document Title	User Manual
Document Creator	Microsoft® Word 2013
Document Author:	Molly.He(何苗)

Phantom 4 Pro V2.0
Quick Start Guide
V1.0
Phantom 4 Pro V2.0
The DJI PHANTOMTM 4 Pro is a smart prosumer flying camera capable of shooting 4K video at 60fps and at up to 100mbps,
and capturing 20 megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight.
Using upgraded TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or
track a moving subject smoothly and easily with a simple tap. The brand new camera uses a 1-inch CMOS sensor offering
unprecedented clarity, lower noise, and better quality images.
In addition to the above features, Phantom 4 Pro V2.0 reduces noise power by 60%, the noise reduced by 4dB, which
improved the efficiency significantly.
Remote Controller
The powerful remote controller of the Phantom 4 Pro V2.0 has a transmission range extending up to 4.3 mi (7 km)*. It
features physical buttons and dials to control exposure, camera tilt, photo capture and video recording.
Built into the Remote Controller is DJI's latest long-range transmission technology OCUSYNCTM, which when paired with a
compatible mobile device gives you a li e HD ie f o the Pha to ’s camera. Dual frequency support makes the HD
video downlink more stable. An internal battery ensures a long battery life and ease of use.
Using Phantom 4 Pro V2.0
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the use ’s autho ity to ope ate the e uip e t.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISEDC RSS Warning
This device complies with licence -exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
RF Exposure Information
Aircraft complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC/ISEDC radio frequency exposure limits, human
proximity to the antenna shall not be less than 20cm during normal operation.
For Remote Controller (model GL300L),SAR tests are conducted using standard operating
positions accepted by the FCC/ ISEDC with the remote controller transmitting at its highest certified power
level in all tested frequency bands, although the SAR is determined at the highest certified power level,
the actual SAR level of the remote controller while operating can be well below the maximum value
value.
Before a new model is a available for sale to the public, it must be tested and certified to the FCC /ISEDC
that it does not exceed the exposure limit established by the FCC/ISEDC,Tests for each model are performed
in positions and locations as required by the FCC /ISEDC.
.
For body worn operation, this mobile phone has been tested and meets the FCC /ISEDC RF exposure
guidelines when used with an accessory designated for this product or when used with an
accessory that contains no metal and that positions the handset a minimum of 10 mm from
the body.
KCC Warning Message
해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수
없습니다.”
해당 무선설비는 운용 중 전파혼신 가능성이 있음
NCC Warning Message
低 率電波輻射性電機管理辦法
第十二條 經型式認證合格之低 率射頻電機，非經許可，公司 商號或使用者均不得擅自變更頻
率
大 率或變更原設計之特性及 能
第十四條 低 率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應改
善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線電通信 低 率射頻電機
須忍受合法通信或工業 科學及醫療用電波輻射性電機設備之干擾
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD hereby declares that this device is in compliance
with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD por la presente declara que este
dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD verklaart hierbij dat dit apparaat
voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance
Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD declara, através deste documento,
que este dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes da
Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/eurocompliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD dichiara che il presente dispositivo è
conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/eurocompliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est
conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD, dass dieses Gerät den wesentlichen
Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have
to be disposed of separately. The disposal at the communal collecting point via private persons
is for free. The owner of old appliances is responsible to bring the appliances to these
collecting points or to similar collection points. With this little personal effort, you contribute
to recycle valuable raw materials and the treatment of toxic substances.
Thailand Warning message
เครื่ องโทรคมนาคมและอุปกรณ์น้ ี มีความสอดคล้องตามข้อกาหนดของ กทช.
Mexico Warning message
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo
o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluye do la ue pueda causa su ope ació o deseada.”
Brazil Warning message
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário

---

Source Exif Data:

EXIF Metadata provided by EXIF.tools