Samsung Electronics Co 2004KHAN2 Video Cassette Recorder User Manual

Samsung Electronics Co Ltd Video Cassette Recorder Users Manual

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

Users Manual

●Safety Instructions ●Features ●Accessories●Connecting ●Tape Controls●Timer Recording ●Remote Control ●Front Panel2 3 4 5 6 7Safety Instructions Remote ControlFront PanelFeaturesAccessoriesLoading the BatteriesPrevent Accidental Tape ErasureHead CleaningTape ControlsConnectingAutomatically Setting the Clock Manual Clock Set Timer RecordingChanging or Canceling a timer recordingNote to CATV system installer : This reminder isprovided to call CATV system installer's attention toArticle 820-40 of the National Electrical Code (Section54 of Canadian Electrical Code, Part I) that providesguidelines for proper grounding and, in particular,specifies that the cable ground shall be connected tothe grounding system of the building as close to thepoint of cable entry as practical. Caution : FCC regulations state that any unautho-rized changes or modifications to this equipment mayvoid the user's authority to operate it. Caution : To prevent electric shock, match wideblade of plug to wide slot, fully insert.Attention : Pour eviter les chocs electriques, intro-duire la lame le plus large de la fiche dans la bornecorrespondante de la prise et pousser jusqu’au fond.Important : One Federal Court has held that unau-thorized recording of copyrighted TV programs is aninfringement of U.S. copyright laws.Certain Canadian programs may be copyrighted andany unauthorized recording in whole or in part maybe a violation of these rights.To prevent damage which may result in fire orelectric shock hazard, do not expose this appliance to rain or moisture.Important Safety Instructions• Hi-Fi Stereo sound (VR8460 only)• Plug and Play• 24Hours X 7 Days Timer Back-up• Rewinds a T-120 in about 100 seconds• One Touch Recording (OTR) up to four hours• Tri-lingual on-screen programming (English/Spanish/French)• Auto Clock SetOld or damaged tapes may clog headsUse "dry" type head cleaning cassette only.Follow cleaning tape instructions carefully.Excessive use of tape can shorten head life.Cleaning the VCRUse soft, dry cloth of dusting attachment of a vacuum toremove dust from all cabinet vent holes.You may moisten cloth with nonabrasive, antistaticcleaner/polisher.Features QualityDigital Auto TrackingContinuously analyzes the signal and adjusts for optimum picture quality.Manual Tracking Control (to reduce picture noise)Use during Playback and Slow Motion mode toreduce picture noisePress the CH/TRK❷button on the remotecontrol or on the VCR until the picture clears up to return to Auto Tracking. Press the EJECT button toeject the tape and insert a tape again. Auto Trackingwill be operate automatically.Playback a Tape1.Insert a tape.Loose or peeling labels may cause tape jam.2.Press the PLAY button to play tape.If Auto play is selected and the video tape has nosafety tab, it will begin playing automatically whenyou insert in the VCR.1."To display a timer recording list, press the MENU and ❿button on the remote control."Loose or peeling labels may cause tape jam.2.Press the ❿and ,❷buttons to set the channel. Press the ❿button to move to the next setting.3."Repeat step 2 to set start time, end time, date and record speed."Loose or peeling labels may cause tape jam.4.Press the MENU button to complete programming the timer recording. Stop the VCR or turn the power off.To stop a timer recording , press the VCR power button.To change the Timer ProgramRepeat steps 1 to 4To cancel the Timer ProgramSelect the program you want to cancel in the timer recording list.Press the CLEAR button twice on the remote or the EJECT button on the VCR to clear the Timer Program settings.TrackingThe Tracking adjustment removes the white lines thatsometimes appear during playback because of slight differences in recording decks. The TRK button will automatically align the recorded tracks with the playbackheads to solve this problem. You may also set trackingmanually.Adjust Tracking ManuallyDuring playback, press the CH/TRK ❷buttons to remove white lines from the picture.Special Features During PlaySpecial Features During PlayForward/Reverse Scene Search1.Press the FF or REW button during playing.2.After search has begun, the speed of search is changed with the duration of press of FF or REW button asshown below.[SLP] : Approx 21X approx 9X[SP] : Approx 7X approx 3X3. Release button to play.Slow Motion Picture1.Press the Slow + or -button while a cassette is playing.2.Press the Slow buttons repeatedly to vary slow motion speed from 1/5 to 1/30 of normal playback.3.Press the PLAY button twice to release.Eject a Tape●Press the EJECT button on remote or the EJECTbutton on VCR to eject tape. Record on a Tape1.Insert a tape with a record tab. Check the record speed.2.Select a channel to record by pressing the CH/TRK/❷or number buttons.3.Press the REC button on the remote control of the front of the VCR. The REC indicator will light. To edit, press the PAUSE button to pause and again to resume recording.4.Press the STOP button to stop recording.One Touch Recording (recording in progress)1.Press the REC button repeatedly to set length as follows.2. Record TimeNot timed30min1 hr1:302:003:004:00Not timed3.The VCR shuts off at the length set.Separate Recording and ViewingSelect the channel with the TV's channel buttons.Select channels on VCR (in STOP or PAUSE mode)Select channels on VCR.for ANT/CABLE VCR TV1.Connect cable from Antenna /Cable to VCR's IN FROM ANT. Jack.2.Connect VCR's OUT TO TV jack to TV's ANT. IN jack with RF Cable (not supplied).REMARK : You cannot watch the VCR through the RFconnection. The RF out sends antenna andcable signals only.for DSS/Cable Box VCR TV1.Connect your cable box's OUT jack to the VCR's IN FROM ANT. Jack with an RF cable.2.Connect VCR's OUT TO TV jack to TV's ANT. IN jack with RF Cable (not supplied).1.Press the MENU button on the remote control. Press the ❷and ❿buttons to select "Clock set/adjust"Alcohol and various solvents could damage your VCR.Check to make sure the following items have beenincluded with your VCR. Battery replacement cautionDo not mix old and new batteriesDo not mix alkaline with manganese batteriesRemote ControlAC59-00046GBatteries for remote (2AA)AC43-12002JOwner’s ManualAC68-02094ARegistration CardAD68-00078A1.5V1.5VOwner’sManualBreak off the tabto preventrecordingTo record againCover the holewith cellophanetape.CautionPlease make all cable or antenna connectionsbefore plugging in to the AC outlet.Plugging the VCR Power Cord into an AC walloutlet starts auto channel and clock set.CautionOver tightening "Nut type" RF coaxial cablesmay damage jack. Finger tighten only. Don't use tool.warningPicture interruption may occur with some TVs.FF and REW search speed may vary depending oncurrent tape position.NotesWatching one channel and recording anotheris not possible when using Cable Box or DSSReceiver. After 5 minutes in Pause mode,VCR stops to protect the tape and the videoheads.NotesWhen using a cable decoder box or DSS make surethe decoder box is on and set to the correct channelfor timer recording.NotesRLLINEOUTLINEIN 1AUDIOVIDEOTV INRLLINEOUTLINEIN 1AUDIOVIDEOTV INIf Auto Clock Set was incomplete1.Press the MENU button on the remote control. Select "Clock set/adjust" and "Manual".2.To enter current time using the /❷buttons then press the ❿button to move to the next setting.3.To enter month, date and year in the same way.4.Press the MENU button to start the clock and exit.POWERPress to turn your VCR on and off.CLEARPress to set counter to zero or to cleartimer record programs.SHUTTLEPress to change speed during playback.NUMBER BUTTONSPress to select channels by assignednumbers. F.ADV/SKIPIn play mode, press to skip ahead 30seconds.In still mode, press to advance oneframe.RECPress to start VCR recording.STOP, PLAY, REW, FFPress to control cassette playbackor to move a cursor in the on screenmenu.MENUPress to display menu screen. EJECTPress to eject a tape. SLOWPress for slow-motion during playback.INPUT SELPress to switch between line input orantenna.DISPLAYPress for on-screen information displays.CHPress to change channels.TRKPress to reduce picture distortion duringplayback. SEARCH/EXITPress to enter the variable search mode or to exit the on screen menu. REPLAYPress to repeat the last 5 seconds of tape during playback.100 Press to select channels higher than 100.(followed by up to two additional numberbuttons)POWERPress to turn the VCR on and off.EJECT Press to eject a tape.EJECT button is used as the CLEAR button on the menu screenCASSETTE COMPARTMENTInsert a video cassette.REW (REWIND)Press to rewind in stop mode or reverse search in play mode.F.F (FAST FORWARD)Press to fast forward in stop mode or forward search in play mode.PLAY Press to play tape.STOP Press to stop tape or press to movea cursor to the right on the menu screen.RECORDPress to record or press to move a cursor tothe left on the menu screen.MENUPress to display or clearthe menu screen.CHANNEL❷Press to change channels or press to move a cursor up or down on the menu screen.2.Press the ❿button to select AUTO.3.Clock data CH :If you select AUTO, the VCR will automatically turn to achannel providing time data.Time zone :If you select AUTO for your time zone, the VCR setsthe clock using the first Coordinated Universal Timeinformation it finds. If time is not correct, select another time zone.Daylight Savings Time :If you select AUTO, the VCR sets the clock usingthe DST information broadcast in the signal (channel). If you select YES, Daylight Savings Timeis observed.4.Press the MENU button when you finish setting the clock.Timer recording❿Clock set/adjustChannel setup VCR function setupLanguage/Lengua/Langue [❷/❿] [MENU/EXIT]MAIN MENUTimer recording❿Clock set/adjustChannel setup VCR function setupLanguage/Lengua/Langue [❷/❿] [MENU/EXIT]MAIN MENUCLOCK SET/ADJUST[❷/❿] [MENU/EXIT][❷/➛❿] [MENU/EXIT]CLOCK SET/ADJUST❿AUTOMANUALSelect [❷] and press [❿][❷/❿] [MENU/EXIT]CLOCK SET/ADJUSTAUTO❿MANUALSelect [❷] and press [❿][❷/➛❿][MENU/EXIT]CLOCK SET/ADJUST❿Clock data CH: [AUTO]Time zone : [AUTO]Do you observe [AUTO]DST in summer? TIME DATEYEAR12:00 1/012004 THU AM[❷/➛❿][MENU/EXIT]CLOCK SET/ADJUSTTIME DATEYEAR9:00 5/052004 WED PM[❷/➛❿][MENU/EXIT]CLOCK SET/ADJUSTTIME DATEYEAR9:00 5/052004 WED PMStill(Freeze) Picture1.Press the PLAY button during playing.2.Press the PLAY button to release.Frame by Frame Picture1.Press the F.ADV/SKIP button repeatedly in still mode. 2.Press the PLAY button to release.3.For Skip Search, press the F.ADV/SKIP button once to skip ahead 30 seconds, twice 60 seconds and up to four times 120 seconds in play mode.Replay Picture1.Press the REPLAY button on the remote control. 2.VCR will rewind for about 5 seconds in SP mode or about 15 seconds in SLP mode, then play back the section again.This symbol is intended to alert the user to thepresence of uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficientmagnitude to constitute a risk of fire or electric shock topersons.This symbol is intended to alert the user to thepresence of important operating and maintenance(servicing) instructions in the literature accompanyingCAUTION1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug hastwo blades with one wider than the other. A grounding type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold withthe apparatus. When a cart is used, use caution when moving the cart/apparatus combinationto avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus hasbeen damaged in any way, such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped.RegistrationCard
12111098DisplayRear PanelSpecifications●CONEXIONES-CONFIGURACIÓN INICIAL●Limited Warranty●Display ●Rear Panel ●SpecificationsVideoCassette RecorderOwner’s ManualVR8460VR5460 ELECTRONICSSAMSUNG VIDEO CASSETTE RECORDERLIMITED WARRANTY TO ORIGINAL PURCHASERThis SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new,in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials andworkmanship for a limited warranty period of: Ninety (90) Days Labor and One (1) Year PartsThis limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warrantyservice can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented uponrequest as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation of the product to and from theservice center is the responsibility of the purchaser.SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts orproducts if found to be defective during the limited warranty period specified above. All replaced parts and products become theproperty of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original war-ranty, or ninety (90) days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of thisproduct and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation;applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish;accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts,supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNGwhich damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjust-ments and failure to follw operating instructions, cleaning, maintenance and environmental instructions that are covered and pre-scribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interfer-ence or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of theproduct.THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIESWHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE,AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITHRESPECT TO THIS PRODUCT SHALL BE BINDING TO SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REV-ENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL ORCONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OFTHE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILI-TY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THANTHE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMIT-ING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHAS-ER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE ORINABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG.THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PROD-UCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequen-tial damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you mayalso have other rights which vary from state to state.To obtain warranty service, please contact SAMSUNG at:SAMSUNG ELECTRONICS AMERICA, INC. CONSUMER ELECTRONICS CUSTOMER SERVICE400 Valley Road, Suite 201, Mount Arlington,NJ 07856Tel: 973-601-6000, Fax: 973-601-60011-800-SAMSUNG (1-800-726-7864)www.samsungsupport.comAntenna input/output terminals: UHF/VHF: 75 ΩF type connectorSignal system: Standard NTSCRecording/Playback system: Recording: VHS format(SP, SLP)Playback: VHS format(SP, LP, SLP)*Video cassette with markRecord/Play Time: 6 hours with T-120 in SLP modeRewind Time: approximately 100 secondsPower Source: 120V AC, 60HzPower Output: VR8460VR5460 App. 12watts on, 2.0watts offDimensions: 360mm(W) X 84mm(H) X 240mm(D)14.2''(W) X 3.3''(H) X 9.4''(D)Weight: 2.7kg/6.0lbsYour VCR can receive 68 broadcast TV channels or up to 125 unscrambled cable channels. Check your local cable company for complete compatibility requirements.TIMER Indicator Timer Recording is set.VCR Indicator Picture source is VCR.TAPE Indicator Lights when a tape is inserted.Hi-Fi IndicatorLights when the VCRreceives a Hi-Fi broadcast(VR8460).Number DisplayDisplays current channel number, clock time,time remaining or tape counter.VCRTIMERUse the jacks on the rear panel to connect the VCR to other components and signals, including: VCRs, TVs,stereo equipment, digital video components, antenna and cable signals.Note: VR5460 has one Audio out on the rear panel.AUDIO OUT (L/R)Used to output audio signals to connectedequipment.AUDIO IN (L/R)Used to input audio signals from connectedequipment to VCR.IN FROM ANT Used to input cable or antenna signals.OUT TO TV Used to output Cable or antennasignals to a TV.REMARK : You cannot watch the VCR thoughthe RF connection. The RF outsends antenna and cable signalsonly.VIDEO OUTUsed to output video signals from VCR to connected equipment.VIDEO INUsed to input video signals from connected equipmentto the VCR.Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Tape Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Location of Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Control remoto universal VCR, presione primero el botón . . . . . . . . . . 10CONEXIONES-CONFIGURACIÓN INICIAL . . . . . . . . . . . . . . . . . . . . 11Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Table of ContentsSAMSUNG ELECTRONICS AMERICA, INC.HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J. 07660-0511 TEL: 1-800-SAMSUNGSERVICE DIVISION 400 Valley Road, Suite 201, Mount Arlington, NJ 07856 TEL: 1-800-SAMSUNG (1-800-726-7864)Control remoto universal VCR, presione primero el botónCONEXIONES-CONFIGURACIÓNINICIAL(READY TO PLAY)POWERPressione para encender y apagar el VCR.CLEARPresione para reajustar el contador decinta.SHUTTLEPressione para cambiar la velocidaddurante la reproducción.BOTTONES DE NÚMEROSPresione para seleccionar canales medi-ante números asignados o para selec-cionar opciones en pantallas. F.ADV-SKIPEn el modo reproducir, presione para saltarhacia adelante 30 segundos. En el modode cámara lenta, presione para avanzar uncuadro.RECPresione para comenzar la grabacióndesde el VCR.STOP, PLAY, REW, FFPresione para controlar la reproducción dela cinta.MENUPresione para seleccionar el programa enpantalla OSP del Menú Principal.EJECTPresione para expulsar la cinta.SLOWUsado para la reproducción encámara lenta.INPUT SELPresione para activar y desactivar lalinea de entrada.DISPLAYPresione para ver información en pantalla.CHPresione para cambiar canales.TRKPresione para ajustar el seguimientode la señal de video durante la reproducción.SEARCH-EXITPresione para salir de la pantallabúsqueda OSP o para cambiar elmodo de visualizaciónREPLAYPresione para la repetición de los últimos 5 seg. durante la reproducción.100 Presione para seleccionar canales porencima de 100.CONEXIONESPara ANT/CABLE VCR TV1.Conecte el cable de la antnna al terminal IN FROM ANT del VCR.2.Conecte el terminal OUT TO TV del VCR a la entrada de la antena VHF/UHF del TV con el cable RF incluido.OBSERVACIÓN : No puede ver el VCR mediante la conexión RF. La salida RF sólo envíaseñales de antena y de cable.Para Sistema Digital de Satelite(DSS)/Convertidor de cable VCR TV1.Conecte la salida de convertidor de cable al terminal IN FROM ANT.2.Conecte el terminal OUT TO TV del VCR a la entrada de la antena VHF/UHF del TV con el cable RF incluido.Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA.La videograbadora iniciará automáticamente la fijación de las canales y del reloj al enchufar elcable de CA.PrecauciónSi aprieta demasiado los cables coaxialesRF "tipo Nut", puede dañar el enchufe.Apriételos sólo con los dedos, sin herramien-tas.PrecauciónTV INTV INReproducción de cintas de videocasete1.Encienda el TV e inserte un casete en el VCR.Presione el botón de PLAY, si es necesario.2.Después de unos pocos segundos de seguimiento automático, deberia escucharse el sonido.1.Prenda el VCR y oprima el botón de MENU para obtener el Munú Principal. Oprima el botón de ❷y ❿para seleccionar el Ajuste de la hora.2.Oprima el botón de /❷y ❿para indicar la hora del dia.3.Oprima el botón de /❷y ❿para indicar el mes, la fecha, y dos últimos números que correspondan al año.4.Oprima el botón de MENU para concluir.1.Oprima el botón de MENU Tras esto, oprima el botón de ❷y ❿para seleccinar el Ajuste de Canales.2.Oprima el botón de ❷y ❿para comenzar la programación automática de canales.Oprima el botón de ❷y ❿para comenzar la programación automática de canales.Para Realizar Ajuste de la HoraDel Menú Principal, oprima el botón de ❷y ❿paraseleccionar ingles, español o francés.Para Cambiar la selección de idiomasPara Realizar Entrada de Ajuste deCanalesAC68-02094A(00)2003.12.31/Version 1.0
Download: Samsung Electronics Co 2004KHAN2 Video Cassette Recorder User Manual
Mirror Download [FCC.gov]Samsung Electronics Co 2004KHAN2 Video Cassette Recorder User Manual
Document ID411332
Application IDcMnsb/YbMQYDDzK8gvUOaw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize30.45kB (380638 bits)
Date Submitted2004-04-02 00:00:00
Date Available2004-04-02 00:00:00
Creation Date2004-03-18 13:34:32
Producing SoftwareAcrobat Distiller 4.0.5 for Macintosh
Document Lastmod2004-03-23 13:10:59
Document TitleUsers Manual
FCC ID Filing: A3L2004KHAN2

Navigation menu