Samsung Electronics Co CYLHDE01A ZigBee/Z-Wave Dongle User Manual

Samsung Electronics Co Ltd ZigBee/Z-Wave Dongle Manual

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

Manual

Version 1.0 Samsung Electronics page 1 of 7 User manual of CY-LHDE01A 1. Introduction CY-LHDE01A is a ZigBee/ Z-wave Combo module compliant with IEEE802.15.4 MAC/baseband/radio and ITU-T G.9959 optimized for low-power applications. The ZigBee chipset is from Silicon Labs, part number EM357-RTR and Z-wave chipset is from Sigma Designs, part number SD3503. 2. Hardware Architecture: 2.1 Main Chipset Information Item Vendor Part Number IEEE802.15.4 ITU-T G.9959 Silicon Labs Sigma Designs EM357-RTR SD3503 3. Operational Description CY-LHDE01A is the 802.15.4 ZigBee, ITU-T G.9959 Z-wave COMBO Module that acts as a communication controller for users of a wireless device to connect to SMART TV - Features > ZigBee 2.4GHz IEEE 802.15.4 > AES128 encryption accelerator > Low power consumption, advanced management >On-chip power amplifiers and low –noise amplifiers for both bands > Z-Wave ITU-T G.9959 > Z-Wave 9.6/40/100 kbit/s data rate >128-bit AES security processor and hardware random number generator - Time base of the RF frequency For ZigBee IF and RF frequency, a crystal(24MHz) is a clock reference. For Z-wave IF and RF frequency, a crystal(32MHz) is a clock reference. - ZigBee Transmission The ZigBee Tx path produces an O-QPSK-modulated signal using the analog front end and digital baseband. The area- and power-efficient Tx architecture uses a two-point modulation scheme to modulate the RF signal generated by the synthesizer. The modulated RF signal is fed to the integrated PA and then out of the EM357. - ZigBee Receiver The ZigBee Rx path uses a low-IF, super-heterodyne receiver that rejects the image frequency using complex mixing and polyphase filtering. In the analog domain, the input RF signal from the antenna is first amplified and mixed down to a 4 MHz IF frequency. The mixers’ output is filtered, combined, and
Version 1.0 Samsung Electronics page 2 of 7 amplified before being sampled by a 12 MSPS ADC. The digitized signal is then demodulated in the digital baseband. The filtering within the Rx path improves the EM35x’s co-existence with other 2.4 GHz transceivers such as Zigbee/ 802.15.4-2003, IEEE 802.11-2007, and Bluetooth radios. The digital baseband also provides gain control of the Rx path, both to enable the reception of small and large wanted signals and to tolerate large interferers. - Z-wave Tranceiver The CY-LHDE01A is a fully integrated module with an on-board antenna that allows the establishment of a Z-Wave network with minimum risk. The SD3503 chip is used with an external NVM (Serial Flash MEM), 32MHz crystal, power supply decoupling, SAW filter, matching circuit, and a PCB pattern Antenna.
Download:
Mirror Download [FCC.gov]
Document ID2670595
Application IDo9Pn6kvuu26NV5E9Rs/akQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.08kB (351059 bits)
Date Submitted2015-07-07 00:00:00
Date Available2015-07-07 00:00:00
Creation Date2015-07-02 17:14:28
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2015-07-02 17:14:28
Document TitleManual
Document CreatorMicrosoft® Word 2010
Document Author: UCS
FCC ID Filing: A3LCYLHDE01A

Navigation menu