Samsung Electronics Co HG40ND478S LED TV User Manual
Samsung Electronics Co Ltd LED TV
Contents
- 1. user manual
- 2. users manual
user manual
Quick Setup Guide Installing the LED TV Stand To register this product please visit www.samsung.com/register. STOP Please do not return this unit Viewing the Connection Panel ♦♦ HG40ND478S / HG43ND478S / HG50ND478S [TV Rear Panel] Components US : 1-866-894-0524 CANADA : 1-800-726-7864 B 1 EA A 1 EA x8 (M4 X L12) x 4 (M4 X L12) • Guide Stand HDMI IN 2 (DVI) • Screws • Security Screws VIDEO x4 (M4 X L12) Front Holder-Wire stand (1EA) Hotel Mount Kit Wall Mount Adapter (Depending on the model) AIR/CABLE ➣➣ The product color and shape may vary depending on the model. ✎✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. Attention Owner’s Instructions Safety Guide ANT IN AUDIO OUT TOP View Power Cord Remote Control (AA59-00817A) & Batteries (AAA x 2) X-LINK EX-LINK AUDIO GAME CONTROL DATA (5V 0.5A) /CLONING AV IN DO NOT USE DO NOT USE DO NOT USE CHEMICALS GREASE OIL Side x4 or (M4 X L12) ✎✎ Insert the Stand Guide into the slot on the bottom of the TV. x4 (Security Screw) ✎✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them. ✎✎ Make sure that at least two people lift and move the LED TV. ✎✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws. ✎✎ The number of screws may differ depending on the model. ♦♦ Assembling the swivel The 40” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. or HDMI IN 1, 2(DVI), 3(ARC) USB (5V 0.5A) / CLONING [TV Rear Panel] VIDEO / L-AUDIO-R EX-LINK DATA Cable ANT IN (AIR/CABLE) GAME CONTROL DATA List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu. X-LINK List of Vendors and Compatible Data Cables Supplied with the TV TV Controller : Turns the TV on or off. Control Menu : Changes channels. : Adjusts the volume. 1. Connect the Lodgenet game controller to the [GAME CONTROLLER/DATA] jack of the TV. 2. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable. ✎✎ The “ETH MODEM” jack name that you connect the Data Cable to may differ depending on the SBB or STB type. 60° swivel To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left. ♦♦ Hotel Mount Kit Short Bolt (2EA) Nut (2EA) Sound Bar Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center as shown. Bottom Long Bolt (2EA) Washer (2EA) Power On/Off is synchronized with the TV HDMI_CEC defaults to On Functions through the “HDMI OUT” port only Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes. Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu. Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45. BN39-00865B NXTV BN39-01011B NStreams BN39-01110A MTI BN39-01011C Remote control sensor/TV Controller ✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller. ✎✎ The product color and shape may vary depending on the model. ✎✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting the volume, and switching the input source. Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord. Specifications License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 40 Inch TV Wall mount Adapter Wall mount Bracket Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved. Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved. 43 ~ 50 Inch Wall mount Bracket TV The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Environmental onsiderations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing Model Name HG40ND478S HG43ND478S Display Resolution HG50ND478S 1920 x 1080 Screen Size (Diagonal) 40” Class (39.5” measured diagonally) 43” Class (42.5” measured diagonally) Sound (Output) 50” Class (49.5” measured diagonally) 10W x 2 Dimensions (WxDxH) Body With stand 922.7 x 72.0 x 530.7 mm 922.7 x 226.5 x 582.3 mm 985.5 x 72.2 x 575.3 mm 985.5 x 226.5 x 624.2 mm 1140.8 x 72.9 x 662.3 mm 1140.8 x 226.5 x 713.9 mm 6.53 kg 9.47 kg 7.71 kg 10.65 kg 10.50 kg 13.44 kg Weight Without Stand With Stand Stand Swivel (Left / Right) 20° / 60° / 90° ➣➣ Design and specifications are subject to change without prior notice. Sound Bar Hotel mode functional characteristics: • • • • • Cable code OCC WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions. Wall Mount Kit Specifications (VESA) ♦♦ Samsung Sound-Bars and Hospitality TVs in 2015 –– Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through the Sound-Bar. –– The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on. If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on. If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on. –– Models supporting the ARC function are listed below: • Sound-Bars: HW-E350/E450/E550 HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F751 ♦♦ Setting the Sound-Bar to Hotel Mode. –– Set the following Hotel menu options: • Hotel option > System > Sound Bar Out = On. • Hotel option > Power On > Power On Volume = User Defined. • Hotel option > Power On > Power On Volume Num > Set greater than 0. • Hotel option > Power On > Max Volume > Set greater than 0. –– Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV. –– After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode. Vendor Standby mode Top Bolt + Nut Note the labeled end. The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control. To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left. To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown to the left. Confirm the code on the Code Label Note the labeled end. : Switchs the available video sources. 90° swivel GAME CONTROL DATA AUDIO OUT Notice When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel 20° swivel BN68-07586B-X2 GAME CONTROL DATA HDMI IN 3 (ARC) HDMI IN 1 • Stand DATA Cable ETH MODEM For web support please visit http://www.samsung.com/us/business When installing the stand, use the provided components and parts. If you are having problems operating this TV, Please call; List of Parts Connecting the TV with an SBB or STB DivX Certified® to play DivX® video up to HD 1080p, including premium content. ➣➣ This device is a Class B digital apparatus. WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury. ➣➣ Standard dimensions for wall mount kits are shown in the table below. ➣➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. ➣➣ Do not use screws that do not comply with the VESA standard screw specifications. ➣➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set. ➣➣ For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. ➣➣ Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Dimensions HG40ND478S / HG43ND478S / HG50ND478S Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English. ➣➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. ➣➣ Do not mount the TV at more than a 15 degree tilt. (unit: mm) ➣➣ Always have two people mount the TV onto a wall. Product Family TV size in inches specs (A * B) in C (mm) Quantity 32.5 ~ 33.5 200 × 200 43 - 50 Standard Screw millimeters 40 LED-TV 40ND478S 922.7 880.1 487.4 530.7 582.3 40.5 72.0 226.5 43ND478S 985.5 942.9 531.3 575.3 624.2 40.5 72.2 226.5 50ND478S 1140.8 1097.8 618.4 662.3 713.9 41.6 72.9 226.5 VESA screw hole M8 21.5 ~ 22.5 Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock. [HD478S-ZC-QSG]BN68-07586B-X2L02.indd 2015-07-13 �� 10:59:04
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:08:07 14:42:30+08:00 Creator : Adobe InDesign CS5.5_J (7.5.3) Modify Date : 2015:08:07 14:43:09+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:08:07 14:43:09+08:00 Creator Tool : Adobe InDesign CS5.5_J (7.5.3) Format : application/pdf Document ID : uuid:725ecec4-b7b4-4b3a-919c-ca0990d81335 Instance ID : uuid:617579ba-b154-4c8f-82b1-492e72bf765d Producer : Adobe PDF Library 9.9 Page Count : 1EXIF Metadata provided by EXIF.tools