Samsung Electronics Co PPM42S3 42-inch PDP Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	319886
Application ID	ymxb+evh6Z50thxwoXtaPg==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.4kB (1730008 bits)
Date Submitted	2003-04-22 00:00:00
Date Available	2003-04-22 00:00:00
Creation Date	2003-04-18 13:56:42
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2003-04-18 13:59:01
Document Title	Users Manual 1
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

@ PDP-MDNITOR
(ELASMADISPLAYEANEL)
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
VIDEO WALL
MDC (MULTIPLE DISPLAY CONTROL)
‘llil'tuat
Dfl-
SURROUND
Thank You for Choosing Samsung!
Thank you for choosing Samsung! Your new Samsung product represents llil' lilies-t in television
tet’linnlugy. We designed it with easy-ro-use oft-screen menus and closed captioning capabilities, making
it one of the best products in its class We are proud to offer you a product that will provide convenient
dependable service and enjoyment for years to come.
I Warning! Important Safety Instructions l
The lightning flash and arrow
CAUTION head within the triangle is a
RISKOFEIECTRICSIIOCK flaming Sign alertinfievqu of
no NOT 0pm dangerous voltage inside
the product.
CAUTION: TO PREVENT ELEcrchL suoctc Do NOT The 9Xc|amatlon pOInt Within
REMOVE REAR COVER, ND usm SERVICEABLE PARTS ‘he (T'af‘g'e '5 aiwam'ms 5‘8"
msme REFER smvtcmc m QUALIFIED SERVICE elemflsyou Of lmPOfiant
PERSONNEL. instructions accompanying
the product,
Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-
40 ol the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines lor
proper grounding and, in particulart specifies that the cable ground shall be connected to the grounding system ol
the building as close to the point of cable entry as practical.
Caution: FCC/GSA regulations state that any unauthorized changes or modifications to this equipment may void
the users authority to operate it.
Caution: To prevent electric shock, match the wide blade at plug to the wide slot, and luIIy insert the plug.
Attention: pour eviler Ies chocs electriques, introduire Ia lame la plus large de la tiche dans la borne
correspondante de la prise et pousseriusqu'au tond.
Important: One Federal Court has held that unauthorized recording at copyrighted TV programs is an
infringement 01 US. copyright |aws,Certain Canadian programs may also be copyrighted and any unauthorized
recording in whole or in part may be in violation at these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE T0 RAIN OR MOISTURE.
Important Safety Informations
00000
Read all safety and operating instructions before operating your PDP.
Keep the safety and operating instructions for future reference.
Heed all warnings on the PDP and in the operating instructions.
Follow all operating and use instructions
Unplug the PDP from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal injury.
Do not use the PDP where contact with or immersion in water is a possibility, such as near bath tubs,
sinks, washing machines, swimming pools, etc.
Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or
floor where it can fall. A falling PDP can cause serious injury to a child or
adult, and serious damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer or sold with
the PDP. Follow the manufacturer's instructions when mounting the unit,
and use a mounting accessory recommended by the manufacturer. Move
the PDP and cart with care. Quick stops, excessive force, and uneven
surfaces can make the unit and cart unsteady and likely to overturn.
Provide ventilation for the PDP. The unit is designed with slots in the cabinet for ventilation to protect
it from overheating. Do not block these openings with any object, and do not place the PDP on a
bed, sofa, rug, or other similar surface. Do not place It near a radiator or heat register. Ii you place the
PDP on a rack or bookcase, ensure that there is adequate ventilation and that you‘ve followed the
manufacturer‘s instructions for mounting.
Operate your PDP only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power com
pany.
Use only a grounded or polarized outlet. For your safety, this PDP is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. if
the plug still does not fit, contact your electrician to replace your outlet.
Protect the power cord. Power supply cords should be routed so that they won’t be walked on or
pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning
storm or when left unattended and unused for long periods of time. This will prevent damage to the
unit due to lightning and power—line surges.
Important Safety Informations (continued)
Avoid overhead power lines. Ari outside antenna system should not be placed in the vicinity of
overhead power lines or other electric Iiglit or power circuits or where it can fall into such power
lines or circuits. When installing an outside antenna system, be extremely careful to keep from
touching the power lines or circuits. Contact with such lines can be fatal.
Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
0 Do not insert anything through the openings in the unit, where they can touch dangerous voltage
points or damage parts. Never spill liquid ofany kind on the PDP.
Ground outdoor antennas. If an outside antenna or cable system is connected to the PDP, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and
built-up static charges Section 810 of the National Electrical Code, ANSI/NFPA No.70-l984,
prowdes information about proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location ofantenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Do not attempt to service the PDP yourself. Refer all servicing to qualified service personnel. Unplug
the unit from the wall outlet and refer serVicing to qualified service personnel under the following
conditions:
— when the power-supply cord or plug is damaged
— if liquid has been spilled on the unit or if objects have fallen into the unit
— if the PDP has been exposed to rain or water
— if the PDP does not operate normally by following the operating instructions
— if the PDP has been dropped or the cabinet has been damaged
4 when the PDP exhibits a distinct change in performance
If you make adjustments yourself, adiust only those controls that are covered by the operating
instructions. Adjusting other controls may result in damage and Will often require extensive work by a
qualified technician to restore the PDP to normal.
When replacement parts are required, be sure the service technician uses replacement parts specified
by the manufacturer or those that have the same characteristics as the original part. Unauthorized
substitutions may result in additional damage to the unit.
Upon completion of any service or repairs to this PDP, ask the service technician to perform safety
checks to determine that the PDP is in a safe operating condition.
The PDP can properly operate in a temperature range of 32~lO4°Fl0~40°Cl and 80% humidity. Do
not use in a hot and humid place,
Before moving the PDP equipped with speakers, separate the speakers from the PDP. if you move the
PDP with the speakers attached, it may result in damage or injury.
FCC Information
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the
followrng warning:
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 ofthe FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, ifnot installed and used in
accordance With the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation,
If this equipment does cause harmful interference to
radio or television receptions, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures.
0 Reorient or relocate the receiving antenna.
0 increase the separation between the equipment
and receiver
0 Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
0 Consult the dealer or an experienced radio/TV
technician for help.
User Information
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment. If
necessary, consult your dealer or an experienced
radio/television technician for additional suggestions,
You may find the booklet called. How to Identify and
Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications
Commission. It is available from the US. Government
Printing Office, Washington, DC 20402, Stock
Number
004-000-00345-4 .
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO, LTD
America QA Lab of Samsung
335i Mlchelson Drive,
Suite ”290, Irvine, CA926T2 USA
Warning
User must use shielded signal interface cables to
maintain FCC compliance for the product. Provrded
with this monitor is a detachable power supply cord
with |EC320 style terminations. It may be suitable for
connection to any UL Listed personal computer with
similar configuration. Before making the connection,
make sure the voltage rating of the computer
convenience outlet is the same as the monitor and
that the ampere rating of the computer convenience
outlet is equal to or exceeds the monitor voltage
rating.
For 120 Volt applications, use only UL Listed
detachable power cord with NEMA configuration 5-
i5P type tparallel bladest plug cap For 240 Volt
applications use only UL Listed Detachable power
supply cord with NEMA configuration 6015? type
ltandem blades) plug cap.
[C Compliance Notice
This Class B digital apparatus meets all requirements
of the Canadian InterferencerCausing Equipment
Regulations of ICES—003.
Cet appareil Numerique de classe B respecte toutes
Ies exigences du Reglemont NMB-O3 sur Ies
e’quipements produisant des interferences au
Canada.
Notice de Conformité IC
Cet appareil nurne'rique de classe B respecte toutes les
exigences du Reglement ICES-003 sur les équipements
produisant des interferences au Canada.
VCCI
This is a Class B product based on the standard of the
Voluntary Control Council for Interference by
Information Technology Equipment (VCCII. If this is
used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install
and use the equipment according to the instruction
manual.
Important Warranty Information Regarding Television
Format Viewing
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to heightl are primarily
designed to view wide screen format ful|»moti0n video. The images displayed on them should primarily
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on
nonvexpanded standard format television video and programming, should be limited to no more than 5%
of the total television viewtng per week,
Additionally, viewing other stationary images and text such as stock market reports, video game displays,
station logos, web sites or computer graphics and patterns, should be limited as described above for all
televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of
PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid
this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars. On PDP models that offer picture sizing features, use these controls to View
different formats as a full screen picture.
Be careful in the selection and duration of television formats used for Vlewlng. Uneven PDP aging as a
result of format selection and use, as well as burned-in images, are not covered by your Samsung limited
warranty.
User Instructions
0 Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma display panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as ”screen burn". To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
0 Cell Defect
The plasma display panel consists of fine cells. Although the panels are produced with more than
99.9 percent active cells, there may be some cells that do not produce light or remain lit.
0 Height
Tlit- PDP ran normally optiiaie only Lli’ltlt’r ZUOUm in height It might abnormally itinttirin at a place
“in 7000m in height and do mtl install and operate there.
0 Warranty
— Warranty Period: Two years starting from the purchase of your PDP.
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Wiring the Mains Power Supply Plug (UK Only)
IMMIANLNQULE
The mains lead on this equipment is supplied with a moulded plug incorporating a luse. The value at the luse is indicated on the
pin lace oi the plug and, ii it requires replacing. a luse approved to BSI|362 ot Ihe same rating must be used Never use the plug
with the luse cover omitted it the cover is detachable it a replacement luse cover is required. it must be or the same colour as lhe
pin lace or the plug Replacement covers are available trom your dealer. it the filled plug is not suitable tor the power points in
your house or the cable is not long enough to reach a power point, you should obtain a suitable satety approved extension lead
or consult your dealer tor assistance. Howeverr it there is no attemative to cut oil the plug remove the luse and then sately
dispose ol the plug Do NOT connect the plug to a mains socket as there is a risk ot shock hazard trom the hated tlekiole cord
IMMIANI
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings Idenlilylng the terminals in your plug. proceed as tollows:
The wire coloured BLUE must be connected to the terminal marked With the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or HEDI
Mm DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BV
THE EARTH SVMBOl é, OR COlOURED GREEN OR GREEN AND VELLOW.
Checktn Parts
Owner's Instructions
Remote Control/
AAA Batteries
C©
2 Install CD 1
- RSZSZC Ferrite Cores for
- Pivot sollware Speaker Wire
This feature bring you more detailed image with SD noise reduction, detail enhancement, contrast
enhancement and while enhancement. New image compensation Algorithm gives brighter, clearer,
much detailed image to you. DNIe’“ technology will fit every signals into your eyes.
Contents
Symbols
Contents (continued)
A (o-
Press Imporianl
Note
’ Your New Plasma Display Panel
> The aciual configuration on your PDP may be different,
depending on your model.
Speaker Speaker
G’
SOURCE
. External mpul selection,
- 5“an we” wi‘i'vgx m w menu
Power Indicator
- Power Off; Red
- Power On; Off
- Timer On; Green
MENU
Mum: (mm.
- VOL +
— Volume adjusrmem,
, Mum in flimO’i mi," r
NOL + ime e he M.
Remole Control Signal Receiver
Aim the remote conrrol towards (hrs spot on rhe
PDR
r nwly
mlf'MJ
VSELA
\ the ruriu’ m We meme
| / 0)
Press re turn the PDP on and off
10
Your New Plasma Display Panel
> The actual configuration on your PDP may be different,
depending on your model.
a) RSZSZC f) VIDEO IN
- IN : Used for the MDC function when connecting Video and audio inputs for external devices, such as
PC or RSZ3ZC output of another PDP. VCR, DVD, vrdeo game device or Video disc players
- OUT : Used for the MDC function when tor for external devtces With an S-Video output;
connecting with R5232C i'tptti of another S-VIDEO).
PDP
g) COMPONENTl IN
b) DVI IN Vldeo (Y/l’b'l’ri and audio (L/R) inputs for
Connect to the vtdeo output jack for device wtth component.
DVt output.
h) VIDEO OUT (VIDEO / L-AUDIO-Rl
c) AUDIO Used to output screen of Vldeo or s-V‘tdeo in PDP
Connect to the audlo output pick on your PC or any when connecting video and/or audio input of
device wrth DVl output external devices.
d) RGBHPCU IN i) EXT SPEAKER (89)
Connect to the video output jack on your PC. Connect external speakers.
e) COMPONENTZ/RGBZ(PC2) IN i) POWER IN
Connect for Input of an Analog RCB or Y/Pb/Pr Connect the supplied power cord.
theo signal from in PC, DVD, or HD devices.
11
Becoming Familiar with the Remote Control
The remote control is used mainly to:
0 Change sources and adjust the volume
0 Set up the PDP using the on-screen menu system
OFF
PDP OFF
scum) MonEsELEcnoN |
PlcTuRE MODE SELECTION CURRENYTIME DISPLAY
DIRECT CHANNEL SELECYION
PICTURE SIILL zooM/PANMNG MENU DISPLAY
(ONLV PC MODE)
NEXT CHANNEL
mm AVAILABLE FOR THIS momma)
VOLUME moanss
TEMPORARY SOUND swmonF
> Press u again , or - 1» humor-
Io turn me sound back on.
EernNAL INPUT ssLEcnon
VOLUME DECRUSE PnEvious CHANNEL
4mm [AVAILABLE FOR nus MONITOR)
A‘”°""‘"° SWWCH'L’" mmnmmon DIsPLAV
oN-soflEEN MENU DISPLAV/ Exrr mom ANY DISPLAV
MOVE to THE REQUIRED MENU
omeu/
ADJUSY AN OP’flON VALUE
nespzcnvsw
cums: counnmmou
SCREEN EFFECT SELECTION
RN c. pa re 11
15” W o c 0") - /— MULTIPLE mspuv common.
AUTO ANUsTMENr IN Po MODE fl
PICTURE 5le sELEcnoN
"925
C) C) C)
SWAP SSEL
(DC)
PIP FUNCTIONS:
- INPUT SWRCESELEC’IION
{soumsp
- IMERCHANGE 1HE MAIN AND THE
sun ncruws 4swm
- SOUND SELECTION (SSEL)
> The performance of the remote control my be affected by bright light
12
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
0 Purchase the PDP
0 Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear 01 the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2 Insert two Fl03, UM4, “AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
0 - on the battery against - on the remote control 3) o
0 + on the bat‘lew against 1» on the remote control
3 Replace the cover by aligning it with the base 01 the remote
control and pressing it back into place
13
if
installation Notes
Installing the Display on the Wall Attachment Panel
This wall mount bracket installation guide is lor the iollowing models: WMN4230/WMN5030/WMN6330.
This installation guide may be different irom the PDP User’s manual. Please reier to the proper
installation guide lor your product.
Do not install the PDP on any place other than vertical walls.
To protect the performance of the PDP and prevent troubles, avoid the followings:
— Do not install next to smoke and tire detectors.
— Do not install in an area subjected to vibration or high voltage.
— Do not install near or around any heating apparatus.
Use only recommended parts and components.
Plastic Hanger Screws
‘fii
PPM42SS/FPM50H3: 4
FPMGSHS’ 6 i
2032 n,
1 Secure the PDP to the wall mount bracket.
(Please refer to the following instructions.)
2 Set the angle by pulling the upper end ol the
PDP attached to bracket in the direction oi the
arrow.
The wall mount bracket is delivered
separately. Please tighten the captive
screw in the direction oi the arrow after
assembling the bracket.
3 The angle can be adjusted from 0” to 20° by
22°.
14
Insta g the Display on the Wall Attachment Panel
> The exterior of the PDP may be diflerent than the picture.
(Assembly and installation of the plastic hanger is the same.)
1 Remove the screws irom the back of the PDP.
PPM4253 1 PPM50H3 1 PPM63H3 1
2 Use the screws and assemble the plastic hanger. , @
if 0 Please ask the installers to install the wall mount bracket,
0 Please be sure to check it the plastic hanger is completely secured on both the left and right
side aiier hanging the PDP on the wall mount bracket,
0 Please avoid catching your lingers while installing and adjusting the angle,
0 Please tightly secure the wall mount bracket to the wall to avoid injury irom a iaIIing PDP.
3 Tighten the screws oi the plastic hanger to the backside of the PDP.
PPM42$3 T PPMSOHS é PPM63H3 g
4 Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (©) to
secure it to the wall mount bracket (®). Tighten the screws as shown (®) so that the PDP cannot be
separated from wall mount bracket.
091
Wall attachment panel bracket
PDP panel
Wall
15
I Connecting Speakers
1 Retrieve the screws on the rear at the PDP
2 Hang the tw T" shaped hangers
on the square bores on the rear of
the PDP
3 Tighten the PDP and the speaker bracxez usrng the screws removed from the PDP
> When moving your PDP, do NOT hold the speaker connected to your PDP, It may damage the
bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of
personal damage and injury.
16
Connecting Speakers (continued)
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the ”+” and ”—” ends of the cable with the diagram on the PDP.
> 0 The speakers MUST have to a power handling capability at 10 watts minimum
(impedance 89).
0 When you connect the speaker Wire to the external speaker out connector, first bind the
speaker wire round the territe core to secure it.
The ferrite cores are used to attenuate undesired signals.
When connecting cables, attach one of these lerrite cores to the cable
near the connectorr
17
Switching On and Off
The mains lead is attached to the rear of your PDP.
(" If you have purchased this PDP in the United Kingdom,
refer to page 55 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
BM: The Standby indicator on the trout ot the PDP lights up.
> The main voltage is indicated on the rear 01 the PDP and
the trequency is 50 or GOHZA
2 Press the “ I / 1'} “ button on the front at the PDP (or ON (6)
button on the remote control) to swtch zhe PDP on
3 To swncn your PDP ott. press the " Ili') " button agarn (or OFF
button on the remote control)
18
Choosing Your Language
When you start using your PDP for the first time, you must select the
language which will be used for displaying menus and indications.
1 Press the MENU button.
Beam: The main menu is displayed.
2 Press ihe A or V bulion lo select Function.
Beam: The options available in the Function group are
displayed,
3 Press the > bunon.
Emu: The Language option is selecled.
4 Press me > bullon again.
BM: The languages available are listed.
5 Selecl lhe appropriate language by pressing the A or V button
repeatedly.
6 Press the ENTER button to confirm your choice.
19
Selecting the Color System (Video or S-Video Mode)
co gr System
but}: Tana
Slze
b i .
4 nun-m b
> Preset to the Video or S-Video mode by using the SOURCE button.
if necessary, select [he broadcasting standard which best
i Iii-responds in your viewing rL'quirum‘nts.
1 Press the MENU button.
Emit: The options available in the Picture group are
displayed
2 Press the P button.
Besult: The color System is selected
3 Select a required color system by pressing the 4 or > button.
Besult: The following color systems are available.
AUTO - PAL - SECAH - NTSC4a43 - ”$3.53 —
PALM— PALM-PALM
Changing the Picture Mode
20
You can select the type of picture which best corresponds to your
Viewing requirements.
1 Press the MENU button.
Result: The options available in the Picture group are
displayed.
2 Press the b button.
3 Press the A or V button to select Mode. Select the option by
pressing the 4 or P button.
BM: The following modes are available depending on the
input source.
0 Dynamic — standard - Movie - Custom
0 Custom — High — Middle — 1m:
(PC or DVI Mode)
> You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
Adiusting the Picture Settings
Your PDP has several settings which allow you to control picture
quality.
4 Dynnmlé b
1 Press the MENU button, 3
Beam: The options available tn the Picture group are gzz'w'w
displayed
nigrrat we
2 Press the b button.
3 Press the A or V button to select Adjust. Press the > button.
Emil: The Adjust: menu is displayed.
4 Press the A or V button to select the option (Contrast,
Brightness, sharpness, Color, Tint-NTSC only) to be ‘ "5mm
adjusted. Press the 4 or b button, - Sharpness
BM: The horizontal bar is displayed. Move the horizontal . c
bar’s cursor Iett or right by pressing the 4 or b button.
5 When you are satlsiled with the settings, press the ENTER button
to store them.
6 Press the MENU button.
BM: The options available in the Picture group are
displayed again,
7 Press the A or V button to select Color Tone. Select the option
by pressing the 4 or b button. The color tones are displayed in
the tollowing order,
Nomi — Warml - Wannz - (20012 - 00011
> If you make any changes to these settings, the picture
mode is automatically switched to the Custom.
21
Adiusting the Picture Settings (PC or DVI Mode)
> Preset to the PC mode by using the SOURCE button.
1 Press the MENU button.
Hes It: The options available in the Picture group are
displayed
CalorTorte 2 Press the P button,
1 5mm Color Aolust ‘
3 Press the A or V button to select Adjust. Press the > button.
BM: The Adjust menu is displayed.
4 Press the A or V button to select the option (Contrast,
Brightness Sharpness) to be adjusted, Press the 4 or b button.
Ftesu t: The horizontal bar is displayed. Move the horizontal
bar‘s cursor lett or right by pressing the 4 or P button.
Brightness-j-
' 5 When you are satisfied with the settings, press the ENTER button
to store them.
6 Press the MENU button,
B§§ it: The options available in the Picture group are
displayed again.
7 Move the Joystick up or down until the Color Tone option is
selected.
8 Press the A or V button to select Color Tone. Select the option
by pressing the 4 or P button. The color tones are displayed in
the following order,
Custom (PC mode only] - Color-1 — Colorz - Color3
9 Press the A or 7 button to select ootor Adjust Press the P
button,
BM: The Color Mjust menu is displayed
Mode 4 ' . 4 Custom } '
{Adjust ‘ p ' ' > 0 When select the com— Tone to Custom, the Color
7 colot fans 4 Custnm > Adjust menu is displayed.
1 .
W 0 The Color Adjust menu can not be selected in DVI
sire ‘ Wide mode.
10 Press the A or V button to select the option (net-1, Green, Blue) to
be adjusted. Press the 4 or > button.
BM: The horizontal bar is displayed. Move the horizontal
bar's cursor lett or right by pressing the 4 or P button.
11 When you are satisfied with the settings, press the ENTER button
to store them
22
Selecting the Picture Size
You can select the picture size which best corresponds to your
Viewing requirements,
if
1 Press the MENU button. h
Wsw
7 4 Dynamic b»
4 Adjust g ’
dotorrone 4' Normal V
Emil: The options available in the Picture group are
displayed.
’ 1 cm 5.18
' Digital NR
2 Press the b button.
3 Press the A or V button to select size. Press the > button.
4 Select the option by pressing the 4 or > button.
BM: The following modes are available depending on the
input source.
‘ Wide - 200ml - 2001112 — 14:9 — Nomi
> The lifting is available in the zoom, zme or
14:9 mode by pressing the V or A button.
0 Wide - Normal
(PC Mode)
> You can also set these options simply by pressmg the
ASPECT button,
C)
Activating/Deactivating the Digital Noise Reduction Feature
If the signal received by your PDI’ is weak, yuu can activate this
feature to reduce any static and ghosting that may appear on the
screen.
”m“ Motto , 4 Dynamic b
, v , 9A 125m Adlust ‘ ,
1 Press the MENU button. ,, VCDIoITone‘ Y ,. 1 manual >
. . . , . vslze ’, . . Awtae
Result: The options available in the chture group are
displayed.
2 Press the > button,
3 Press the A or V button to select Di ital NR.
4 Press the 4 or b button to change the setting (on or off).
23
’ Freezing the Current Picture
You can freeze the picture when watching a moving picture simply
by pressing the ”STILL” button, To return to normal viewing/ press
it again.
> In the PIP mode, the main and sub pictures are stilled at
the same time.
Changing the Sound Mode
You can select the type of special sound effect to be used when
watching a given broadcast.
, . ' (Custom
9 W Equallur 1 Press the MENU button,
,7 Ag. V‘glume
BM! The main menu is displayed.
, 2 Press the A or V button to select sound.
Virtual surround
Til Pzr- '~ ' : Result: The options avallable in the Sound group are displayed.
3 Press the P button.
Emu: The Mode is selected.
4 Select the option by pressing the 1 or > button. The sound effects
are displayed in the following order.
Custom — Standard - Music - Movie - Speech
> You can also set these options simply by pressing the
S.MODE (Sound Model button.
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:04:18 13:59:01-03:00
Create Date                     : 2003:04:18 13:56:42-03:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 24
Mod Date                        : 2003:04:18 13:59:01-03:00
Creation Date                   : 2003:04:18 13:56:42-03:00
Metadata Date                   : 2003:04:18 13:59:01-03:00

EXIF Metadata provided by EXIF.tools