Samsung Electronics Co PPM63H3 63-inch PDP Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	331067
Application ID	3vr6zm80YBX2Zy9WLlvnEg==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.57kB (1807119 bits)
Date Submitted	2003-06-09 00:00:00
Date Available	2003-06-09 00:00:00
Creation Date	2003-06-09 12:25:43
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2003-06-09 12:26:15
Document Title	Users Manual 1
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

@ POP-MONITOR
(ELASMADISPlAYEANEL)
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
VIDEO WALL
MDC (MULTIPLE DISPLAY CONTROL)
‘llit‘l'JAE.
Dfl-
SURROUND
Thank You for Choosing Samsung!
Thank you for choosing Samsungl Your new Samsung product represents the latest in television
tu‘iirwlngy, We designed it with easy-to-use on-screen menus and closed captioning capabilities, making
it one of the best products in its class, We are proud to offer you a product that will provide convenient,
dependable service and enjoyment for years to come,
‘ Warning! Important Safety Instructions i
The lightning flash and arrow
CAUTlON head within the triangle is a
RISK OFELEC'I'RIC snocx mammg 5'8" allefi'rlg_y0}l of
DO NOT OPEN angerous V0 tage InSIde
the product.
CAUTION: TO PREVENT EtEcrchL SHOCK, Do NOT Thhe ixc'almi'io" PW.“ Mlh'”
REMOVE REAR cOVER, N0 USER SEchEABLE PARTS ‘ e (”ans 9 ls 3 Warning Sign
INSIDE. REFER SERVICING To QUALIFIED SERVICE alerting you Of imPOfum
PERSONNEL instructions accompanying
the product
Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-
40 of the National Electrical Code (Section 54 ct Canadian Electrical Code. Part I), that provides guidelines lor
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of
the building as close to the point of cable entry as practical.
Caution: FCC/GSA regulations state that any unauthorized changes or modilicalions to this equipment may void
the user's authority to operate it.
Cautlon: To prevent electric shock, match the wide blade ol plug to the wide slot, and lully insert the plug.
Attention: pour eyiter Ies chaos electriques, introduire Ia lame le plus large de la liche dans la bome
correspondente de la prise et pousser jusqu'au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an
infringement of U.S. copyright lawstCertain Canadian programs may also be copyrighted and any unauthorized
recording in whole or in part may be in violation of these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important Safety Informations
00000
Read all safety and operating instructions before operating your PDP.
Keep the safety and operating instructions for future reference.
Heed all warnings on the PDP and in the operating instructions.
Follow all operating and use instructions.
Unplug the PDP from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal iniury.
Do not use the PDP where contact with or immersion in water is a possibility, such as near bath tubs,
sinks, washing machines, swimming pools, etc.
Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or
floor where it can fall. A falling PDP can cause serious injury to a child or
adult, and serious damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer or sold with
the PDP. Follow the manufacturer's instructions when mounting the unit,
and use a mounting accessory recommended by the manufacturer. Move
the PDP and cart with care, Quick stops, excessive force, and uneven
surfaces can make the unit and cart unsteady and likely to overturn. -&
Provide ventilation for the PDP. The unit is designed with slots in the Cabinet for ventilation to protect
it from overheating. Do not block these openings with any object, and do not place the PDP on a
bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the
PDP on a rack or bookcase, ensure that there is adequate ventilation and that you‘ve followed the
manufacturer's instructions for mounting.
Operate your PDP only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power com
pany.
Use only a grounded or polarized outlet. For your safety, this PDP is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug, If
the plug still does not fit, contact your electrician to replace your outlet,
Protect the power cord, Power supply cords should be routed so that they won’t be walked on or
pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning
storm or when left unattended and unused for long periods of time. This will prevent damage to the
unit due to lightning and power-line surges,
Important Safety Informations (continued)
Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of
overhead power lines or other electric light or power circuits or where it can fall into such power
lines or circuits. When installing an outside antenna system, be extremely careful to keep from
touching the power lines or circuits. Contact with such lines can be fatal.
Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
Do not insert anything through the openings in the unit, where they can touch dangerous voltage
points or damage parts. Never spill liquid of any kind on the PDP.
Ground outdoor antennas. If an outside antenna or cable system is connected to the PDP, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and
built—up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984,
provides information about proper grounding of the mast and supporting structure, grounding of the
lead—in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Do not attempt to service the PDP yourself. Refer all servicing to qualified service personnel. Unplug
the unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
— when the power-supply cord or plug is damaged
— if liquid has been spilled on the unit or if objects have fallen into the unit
— if the PDP has been exposed to rain or water
— ifthe PDP does not operate normally by following the operating instructions
— if the PDP has been dropped or the cabinet has been damaged
— when the PDP exhibits a distinct change in performance
If you make adjustments yourself, adjust only those controls that are covered by the operating
instructions. Adjusting other controls may result in damage and will often require extensive work by a
qualified technician to restore the PDP to normal.
When replacement parts are required, be sure the service technician uses replacement parts specified
by the manufacturer or those that have the same characteristics as the original part. Unauthorized
substitutions may result in additional damage to the unit.
Upon completion of any service or repairs to this PDP, ask the service technician to perform safety
checks to determine that the PDP is in a safe operating condition.
The PDP can properly operate in a temperature range of 32~104°Fl0~40°0 and 80% humidity. Do
not use in a hot and humid place.
Before moving the PDP equipped With speakers, separate the speakers from the PDP. if you move the
PDP with the speakers attached, it may result in damage or injury.
FCC Information
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the
following warning:
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur III a
particular installation.
If this equipment does cause harmful interference to
radio or television receptions, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
0 Reorient or relocate the receiving antenna.
0 increase the separation between the equipment
and receiver.
0 Connect the equipment into an outlet on a crrcuit
different from that to which the receiver is
connected.
0 Consult the dealer or an experienced radio/TV
technician for help.
User Information
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment. If
necessary, consult your dealer or an experienced
radio/television technician for additional suggestions.
You may find the booklet called. How to Identify and
Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications
Commission, It is available from the US. Government
Printing Office, Washington, DC 20402, Stock
Number
004-000—00345-4 .
The party responsible for product compliance;
SAMSUNG ELECTRONlCS CO., LTD
America QA Lab of Samsung
335] Michelson Drive,
Suite $3290, Irvine, CA92612 USA
Warning
User must use shielded signal interface cables to
maintain FCC compliance for the product. Provided
with this monitor is a detachable power supply cord
with IEC320 style terminations. It may be suitable for
connection to any UL Listed personal computer with
similar configuration. Before making the connection,
make sure the voltage rating ofthe computer
convenience outlet is the same as the monitor and
that the ampere rating of the computer convenience
outlet is equal to or exceeds the monitor voltage
rating.
For 120 Volt applications, use only UL Listed
detachable power cord with NEMA configuration 5-
TSP type lparallel bladesl plug cap. For 240 Volt
applications use only UL Listed Detachable power
supply cord with NEMA configuration GOTSP type
(tandem blades) plug cap,
IC Compliance Notice
This Class B digital apparatus meets all requirements
of the Canadian interference-Causing Equipment
Regulations of ICES-003.
Cet appareil Numerique rle classe B respecte toutes
les exigences du Reglemont NMB-03 sur les
equipemerits produisant des interferences au
Canada.
Notice de Conformite’ IC
Cet appareil nume’rique de classe B respecte toutes les
exigences du Reglement ICES-003 sur les équipements
produisant des interferences au Canada.
VCCI
This is a Class B product based on the standard of the
Voluntary Control Council for Interference by
Information Technology Equipment lVCCI). If this is
used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install
and use the equipment according to the instruction
manual.
Important Warranty Information Regarding Television
Format Viewing
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to heightl are primarily
designed to view wide screen format full-motion video. The images displayed on them should primarily
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
constantly moving. Displaying stationary graphics and images on screen, such as the dark side—bars on
non—expanded standard format television video and programming, should be limited to no more than 5%
of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays,
station logos, web sites or computer graphics and patterns, should be limited as described above for all
televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of
PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid
this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view
different formats as a full screen picture.
Be careful in the selection and duration of television formats used lor viewing. Uneven PDP aging as a
result of lormat selection and use, as well as burned—in images, are not covered by your Samsung limited
warranty.
User Instructions
0 Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma display panel for more than 2 hours as it can cause screen image retention, This image
retention is also known as ”screen burn". To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
0 Cell Defect
The plasma display panel consists oi line cells. Although the panels are produced with more than
99.9 percent active cells, there may be some cells that do not produce light or remain lit.
0 Heighl
lht' PDP r (in innnmlly operate only unrler ltiOUrn in height. it might dl)lll)l'll!dll\,' function l" <1 plat r‘
zwoi 20mm in height and tlti not install and operate there.
0 Warranty
- Warranty Period: Two years starting from the purchase of your PDP.
- Warranty does not cover any damage caused by image retention.
- Burn—in is not covered by the warranty.
Wi ing the Mains Power Supply Plug (UK Only)
The mains lead on this equipment is supplied with a moulded plug incorporating a luse. The value of the tuse is indicated on the
pin face ol the plug and, it it requires replacing, a luse approved to BSI1362 of the same rating must be used, Never use the plug
with the fuse cover omitted ii the cover is detachable. if a replacement luse cover is required, it must be of the same colour as the
pin lace ol the plug. Replacement covers are available lrom your dealer. If the fitted plug is not suitable lor the power points in
your house or the cable is not long enough to reach a power point. you should obtain a suitable salety approved extension lead
or consult yourdealer for assistance. However, ilthere is no alternative to cut olfthe plug. remove the iuse and then safely
dispose of the plug. Do NOT connect the plug to a mains socket as there Is a risk of shock hazard lrorn the bared ttexible cord.
MIMI
The wrres in the mains lead are coloured in accordance wrth the lollowlng code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identilying the terminals in your plug, proceed as follows.
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the lerrninal marked with the letter L or coloured BROWN or RED.
Mm DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY
THE EARTH SVMBOLé, OR COLOURED GREEN OR GREEN AND VEllOW,
c mg Parts
Owner's Instructions
Remote Control/
AAA Batteries
C@
2 Install CD
- RSZBZC Ferrite Cores lor
- Pivot software Speaker Wire
DN IeTM
This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast
enhancement and white enhancement. New image compensation Algorithm gives brighter, dearer,
much detailed image to you. DNleW technology will fit every signals into your eyes.
Contents
Symbols
Contents (continued)
A (0‘
Press lmpurtant
Note
Your New Plasma Display Panel
> The actual configuration on your PDP may be dillerenl.
depending on your model.
P42
Speaker Speaker
(EJ
SOURCE
- External rnput seleclron.
- Sum your Svifmgs m the mmu
Power lndicalor
— Power Off; Red
— Power On; Off
- Timer On“ Green
MENU
Me'm {Jlkplax' gym (um
- VOL +
— Volume adjustment.
Mum nu opium w l'
(VOL + lnler m ”re s , ,.
Remote Control Signal Receiver
Aim the remote control towards this spot on the
pot men,
1 mmm l
VSELA
t'rr . 'll'9(‘ul>u' m ”0 fiver-p.
| / ('>
Press to turn the PDP on and off.
10
Your New Plasma Display Panel
> The actual configuration on your FDP may be diflerent,
depending on your model,
a) RS232C f) VIDEO IN
- IN : Used for the MDC function when connecting Video and audio inputs for external devices, such 35
PC or RSZ32C output of another PDP. VCR, DVD, vtdeo game device or vtdeo disc players
- OUT : Used for the MDC function when (or for external devices with an S-Video oulput;
connectmg with R5232C t'tptt‘t of another S-VIDEO).
PDP.
g) COMPONENT1 IN
b) DVI IN theo tY/l’hil’v) and audto (UR) inputs for
Connect to the video output Jack lor devtce with component.
th Output.
h) VIDEO OUT (VIDEO / L-AUDIO-R)
c) AUDIO Used to output screen of Video or S-theo m PDP
Connect to the audio output jack on your PC or any when connecting vtdeo and/or audio rnput of
device with DVI output. external devices.
d) RGB1 (PCI) IN i) EXT SPEAKER (89)
Connect to the vrdeo output jack on your PC Connect external speakers.
e) COMPONENTZ/RGBZtPCZ) IN j) POWER IN
Connect for input of an Analog 1203 or V/Pb/Pr Connect the supplied power cord,
video signal from in PC, DVD, or HD devices.
11
Becoming Familiar with the Remote Control
The remote control is used mainly to:
0 Change sources and adjust the volume
0 Set up the PDP using the oil-screen menu system
sOuND MODE SELECTION
PICTURE MODE SELECTlON
DIRECT CHANNEL sELEcTION
VOLUME INCREASE
TEMPORARV SOUND swrrcfi-OFF
> Press u again ,or - /4 human
to mm me sound hack on
VOLUME DECREASE
AUTOMATIC SWITCH—OFF
ONscREEN MENU DISFLAW
MOVE To THE REQUIRED MENU
OPTION/
ADJUST AN OPTION vALuE
HESPECTIVELV
SCREEN EFFECT SELECTION
(BURNING PROTECTION]
.__5
(DOC)
SWAP S.SEL
. \MODE§LOCKPEH.AY
D A BEE/—
sift“ [fiffié ”‘éb‘URc"
PDP OFF
cunnENT TIME DISPLAY
100M!PANNING MENU DlsPLAY
(ONLY PC MODE)
NExT CHANNEL
(NOT AVAILABLE FOR THIS MONITOR)
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
(NOT AVAILABLE FOR THIS MONH‘OR)
INFORMATION DIsPLAv
EXIT FROM ANY DIsPLAv
CHANGE CONFIRMATION
MULTIPLE ulsPLAv QONIROI.
PICTURE SIZE SELEC'IION
PIP FUNCTIONS;
- PIP ON/OFF
- sIzE sELEcTION (SIZE)
- LOCATION SELECTiON (LOCATE)
- INPUT soURcE SELECTION
(SOURCE)
- INTERCNANGE THE MAIN AND THE
sue PICTUE (SWAP)
- SOUND sELEc'noN (5.5EI.)
> The performance of the remote control may be affected by bright lighl.
12 "
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
0 Purchase the PDP
0 Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol downwards and then puliing firmly to remove it.
2 Insert lwo R03, UMA, "AAA” 1.5V or equivaient batteries taking
care to respect the polarities:
0 - on the battery against - on the remote control
0 + on the battery against + on the remote control
3 Replace the cover by alrgning it with the base of the remote
control and pressing it back into place,
13
Installing the Display on the Wall Attachment Panel
it This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330,
This installation guide may be different from the PDP User‘s manual. Please refer to the proper
installation guide for your product.
0 Do not install the PDP on any place other than vertical walls.
0 To protect the performance of the PDP and prevent troubles, avoid the followings:
— Do not install next to smoke and fire detectors.
— Do not install in an area subjected to vibration or high voltage.
— Do not install near or around any heating apparatus.
0 Use only recommended parts and components.
Plastic Hanger Screws
®fi§
PPM4233/PPM50H3 4
PPM63H3: 6
- mu, a.
Secure the PDP lo the wait mount bracket,
(Please refer to the following instructions)
2 Set the angle by pulling the upper end of the
PDP attached to bracket in the direction of the
arrow.
The wall mount bracket is delivered
separately. Please tighten the captive
screw in the direction of the arrow atter
assembling the bracket.
The angle can be adjusted from 0° to 20° by
32°.
14
Installing the Display on the Wall Attachment Panel
> The exterior oi the PDP may be diflerent than the picture,
(Assembly and installation of the plastic hanger is the same)
1 Ftemove the screws from the back ol the PDP
PPM4233 1 PPMSOHB z PPM63H3 !
2 Use the screws and assemble the plastic hangerr (“IQ/3 “m0 _’ @
C 0 Please ask the installers to install the wall mount bracket
0 Please be sure to check if the plastic hanger is completely secured on both the Ielt and right
side alter hanging the PDP on the wall mount bracket.
0 Please avoid catching yourlingers while installing and adjusting the angle.
0 Please tightly secure the wall mount bracket to the wall to avoid injury trom a telling PDP
3 Tighten the screws oi the plastic hanger to the back side of the PDP,
PPMAQSS v PPMSOHS é PPM63H3 g
4 Put the 4 pegs on the PDP in the grooves oi the wall mount bracket and pull down on the PDP (©) to
secure it to the wall mount bracket (CD). Tighten the screws as shown (©) so that the PDP cannot be
separated trom wall mount bracket,
PDP panel _>
91
, Wall ,
Wall attachment panel bracket
15
I Connecting Speakers
1 Remove the screws on the rear of lhe POP
2 Hang the two “T” shaped hangers
on (he square hares on the rcaroi
the PDP.
PPM42$3
PPMSDHS
1.55
> When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the
bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of
personal damage and injury.
16
Connecting Speakers (continued)
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the ”+” and ”-” ends of the cable with the diagram on the PDP.
> 0 The speakers MUST have to a power handling capability ol 10 watts minimum
(impedance 89).
0 when you connect the speaker wire to the external speaker out connector, first bind the
speaker wire round the lerrite core to secure it.
rte Cores
The ferrite cores are used to atlenuate undesired signals.
When connecting cables, attach one ol these lerrite cores to the cable
near the connectort
17
Switching On and Off
The mains lead is attached tn the rear of your PDP.
t.“ If you have purchased this PDP in the United Kingdom,
refer to page 55 for further instructions on plug wiring,
1 Plug the mains lead into an appropriate socket.
Regu t: The Standby indicator on the front at the PDP lights up.
> The main voltage is indicated on the rear oi the PDP and
the frequency is 50 or SOHZ,
2 Press the “ ”(D " button on the iront of the PDP (or ON (0)
button on the remote control) to switch the PDP on
3 To swrtch your PDP oft. press the " lid} " button again (or OFF
button on the remote controli
18
Choosing Your Language
When you smrt using your PDP for the first time, you must select the
language which will be used for displaying menus and indications.
l“ Language . English i
1 Press the MENU button. ,: w , >
Bgsujt: The main menu is displayed
2 Press the A or V button to select Function.
Result: The options available in the Function group are
displayed.
3 Press the P button.
BM: The Language option is selected.
4 Press the P button again. Fungal;
Biwlii The languages available are listed.
5 Select the appropriate language by pressing the A or 7 button
repeatedly,
6 Press the ENTER button to coniirm your choice.
19
Selecting the Color System (Video or S-Video Model
PW" Colorsysxern
Q N, uses
‘Auiust
5m? Color Tone
llnrtlcn 5“
, Digital NR
> Preset to the Video or S-Video mode by using the SOURCE button.
If necessary/ select the broadcasting standard Whit/1 best
corresponds to your viewing requirements,
1 Press the MENU button.
Beam: The options available in the Picture group are
displayed.
2 Press the > button.
BM: The Color System is selected.
3 Select a required color system by pressing the 1 or b button.
Ftesu t: The lollowing color systems are available.
AUTO — PAL — SECAM — “TSCAAB - MSC3.58 -
PAL M - PAL ll — PMD
Changing the Picture Mode
l moor wooruoctmgw
"@
-@@
20
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU button,
Resu t: The options available in the Picture group are
displayed.
2 Press the b button,
3 Press the A or V button to select Mode. Select the option by
pressing the 4 or > button.
Result: The lollowing modes are available depending on the
input source.
0 Dynamic — standard - Movie - Custom
0 Custom - High - Middle - Low
(PC or DVI Mode)
> Vou can also set these options simply by pressing the
P.MODE (Picture Model button.
Adiusting the Picture Settings W
Your PDP has several settings which allow you to control picture
quality,
Mario . ‘ ' Dynamic >
1 Press the MENU button.
Besult: The options available in the Picture group are c“ Sign” '
displayed. . _ .4 J" >
2 Press the b button.
3 Press the A or V button to select Adjust, Press the b button.
Emil: The Adjust menu is displayed.
4 Press the A or V button to select the option (Contrast, I Cum“,
Brightness, sharpness, Color, Tint-NTSC only) to be . angmm
adjusted. Press the 4 or P button. . sh“,
EN: The horizontal bar is displayed. Move the horizontal
bar's cursor Ielt or right by pressing the 4 or b button.
5 When you are satisfied with the settings, press the ENTER button
to store them.
6 Press the MENU button.
RM: The options available in the Picture group are
displayed again.
7 Press the A or V button to select Color Tone. Select the option
by pressing the 4 or P button. The color tones are displayed in
the lollowing order,
Nomal - Hamil — WarmZ - (10012 — Cocll
> If you make any changes to these settings, the picture
mode is automatically switched to the Custom.
21
Adjusting the Picture Settings (PC or DVI Mode)
‘“ Mode , 4 Custom b
sororrnne , 4 Custom b
ColurAdlusl 7 P
4 custom > .
>7 .,
-, 4 Custom >-’
22
> Preset to the PC mode by using the SOURCE button.
1 Press the MENU button.
mm: The options available in the Picture group are
displayed.
2 Press the b button.
3 Press the A or V button to select Adjust. Press the > button.
Beam: The Adjust menu is displayed.
4 Press the A or V button to select the option (contrast,
Brightness, sharpness) to be adjusted. Press the 4 or P button.
RM: The horizontal bar rs displayed. Move the horizontal
bar's cursor left or right by pressing the 4 or b button.
5 When you are satisfied with the settings, press the ENTEH button
to store them.
6 Press the MENU button.
Result: The options available in the Picture group are
displayed again.
7 Move the joystick up or down until the Color Tone option is
selected.
8 Press the A or V button to select Color Tone. Select the option
by pressing the 4 or P button. The color tones are displayed in
the following order.
Gusto-MPG mode only) - colorl — Colorz — Color3
9 Press the A or V button to select color Adjust. Press the P
button.
Result: The Color Adjust: menu is displayed.
> 0 When select the Color Tone to Custom, the Color
Adjust: menu is displayed.
0 The Color Adjust menu can not be selected in DVI
mode.
10 Press the A or V button to select the option (Red, Green, Blue) to
be adjusted. Press the 4 or b button.
Result: The horizontal bar is displayed. Move the horizontal
bar‘s cursor Ielt or right by pressing the 4 or b button.
11 When you are satisfied with the settings, press the ENTER button
to store them.
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements
1 Press the MENU button.
BM: The options available in the Picture group are
displayed.
2 Press the b button.
3 Press the A or V button to select size, Press the > button,
4 Select the option by pressing the 4 or > button,
Bifllli The following modes are available depending on the
input source.
‘ Wide ‘ Zoom! - zomz — 14:9 — Nomal
> The lifting is available in the zoom, zocmz or
14:9 mode by pressing the V or A button,
0 wide — henna].
(PC Mode)
> You can also set these options simply by pressing the
ASPECT button.
Mods
Adjust
Color Time 4 Manual F
Dlgltnl NH
AUTO S.EFFECl ASPECl MDC
‘
SIZE-106A“ [
C) D
ActivatingflDeactivating the Digital Noise Reduction Feature
If the signal received by your PDP is weak, you can activate this
feature to reduce any static and ghosting that may appear on the
screen.
1 Press the MENU button.
BM: The options available in the Picture group are
displayed.
2 Press the P button.
3 Press the A or V button to select Digital Il'R.
4 Press the 4 or P button to change the setting (on or off).
Mode . 4 Dynamic b
Adlust >
Color-Tune . , 4 Manual F
Wide
23
’ Freezing the Current Picture
You can Freeze the picture when watching a moving pitmrc simply
by pressing the ”STILL” button. To return to normal viewing, press
it again.
> In the PIP mode, the main and sub pictures are stilled at
the same time.
Changing the Sound Mode
You can select the type of special sound effect to be used when
watching a given broadcast.
“L" Mode 4 Custom P
m Equalizer > . . 1 Press the MENU button.
’ Auto-Volume 4 on b . .
5M Melody 4 on bl ‘ BM“
film Pseudo Stereo ' 2
nual surround
The main menu is displayed.
Press the A or V button to select sound.
Result: The options available in the Sound group are displayed,
3 Press the P button.
Begun: The Mode is selected,
4 Select the option by pressing the 4 or P button. The sound effects
are displayed in the following order,
Custom - Standard - Music - Movie - Speech
> You can also set these options simply by pressing the
S.MODE (Sound Mode) button,
24

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:06:09 12:26:15-03:00
Create Date                     : 2003:06:09 12:25:43-03:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 24
Mod Date                        : 2003:06:09 12:26:15-03:00
Creation Date                   : 2003:06:09 12:25:43-03:00
Metadata Date                   : 2003:06:09 12:26:15-03:00

EXIF Metadata provided by EXIF.tools