Samsung Electronics Co SSG3570CR 3D Active Glasses User Manual

Samsung Electronics Co Ltd 3D Active Glasses Users Manual

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

Users Manual

English-1EnglishFeaturesSamsung's SSG-3570CR 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band. ✎This product can be used only with Samsung D, E, and F series 3D TVs released in 2011 to 2013 or with 3D TVs that have any of the logos below. Other wireless devices are not compatible with this product. ✎The "Full HD 3D Glasses™" Logo signifies compatibility between display products and 3D Glasses that are compliant with the "Full HD 3D Glasses™" format and does not indicate the picture quality of the 3D images visible using the glasses, which depends on the quality of the display products.Parts Components3D Active GlassesUser GuideCleaning clothMicro USB CableNose pad ※To wear the 3D glasses over eyeglasses, detach the nose pad from the 3D glasses. ※Refer to the last chapter in this user guide for details about how to attach or detach the nose pad.Pairing 3D Active Glasses ✎What is Pairing? Pairing is a process that prepares devices to exchange data so that, in operation, the devices can transmit and exchange data instantly. ✎Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This feature only applies to Samsung F series 3D TVs and 3D glasses that have been launched since 2013.) ✎The working distance depends on obstacles (a person, metal, walls, etc.) or electromagnetic waves. ✎Note that if you take off the 3D glasses while viewing 3D video and the 3D mode remains enabled on your TV, it will take 5 minutes for the 3D glasses to power off. ✎If the glasses do not operate immediately when you put them on while the TV is in 3D mode, put the glasses on again. ✎This product is rechargeable. It may not operate due to the dead battery when you attempt to use it for the first time. In this case, charge the battery.3D Active GlassesSSG-3570CRUser’s GuidePairing: Press the pairing button on the 3D glasses for more than 1 seconds. Pairing will start.Turning the glasses on and off: Put on the 3D glasses. The glasses will automatically power on and the green LED will be lit for 3 seconds. To power off the glasses, take off the glasses. Several minutes later, the glasses will automatically power off and the red LED will be lit for 3 seconds. (Make  sure that 3D is activated on the TV before using the 3D glasses.) Operating rangeRecommended viewing distance 2~6m Recommended pairing distance 50 cmRecommended viewing distanceRecommended pairing distanceorNose padpairing buttonLiquid-crystal shutter2~6m50cm[NA]SSG-3570CR-00L17.indb   1 2013-01-02    9:15:09
English-2 Pairing for the first time1.  Turn on the TV and wait until the TV is fully on.2.  Press the pairing button on the 3D glasses shortly. The 3D glasses will power on and pairing will start.3.  The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is successfully completed.4.  Enjoy 3D video after configuring the 3D function settings on the TV. ✎After the first pairing, putting on the 3D glasses will automatically power on the glasses. To power off, take off the glasses. ✎If the pairing fails, the 3D glasses will power off. ✎If the first attempt to pair fails, turn the TV off and on again, and then go to Step 2. ✎The LED will blink green and red alternately for 1 seconds if pairing is in progress. How to pair again: Press the pairing button on the 3D glasses for more than 1 seconds.<Pairing is needed again in the following occasions> –Pairing may be needed again after you have had your 3D TV repaired. –If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013. Charging the BatteryIf the red LED blinks every 2 seconds, charge the battery as shown below. The orange LED will blink every second when battery charging is in progress. The green LED will blink every 2 seconds when the charging is finished. (It takes about 30 minutes to fully charge the battery that is dead; however, the time required to charge it to full capacity may vary depending on the battery level and the voltage of the supplied power.)USB1USBUSB PORTMicro USB CableSAMSUNG TVPCNote Book Viewing guidelines• When viewing 3D video under a fluorescent lamp (50Hz – 60Hz) or 3-wavelength lamp, you may notice a small amount of screen flickering. ※If so, dim the light or turn the lamp off.• Switching the input mode while watching a 3D movie may disable the 3D function on the TV. As a result, the 3D glasses may not function and the movie may not be displayed properly.• Ensure you are within the working range when you view a 3D video. ※If you move the 3D glasses outside of their working range, the signal from the TV will be disconnected, and the 3D glasses will be automatically turned off. When this happens, the red LED will turn on for 3 seconds.[NA]SSG-3570CR-00L17.indb   2 2013-01-02    9:15:09
English-3English• The vividness of the image may appear degraded if you view 3D video in a place that is exposed to direct sunlight or illumination.• If you lie on your side while watching TV with 3D glasses, the picture may look dark or may not be visible.• The 3D effect may be experienced differently depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye.• If a lens or any part of the 3D glasses is defective or damaged, the glasses cannot be repaired and should be exchanged. Broken 3D glasses can be exchanged for a new pair free of charge within the warranty period. Note that damage caused by the fault of the user is not covered by the warranty.• The 3D glasses may not function properly if there are any nearby 3D products or electromagnetic devices (a microwave or a device that uses 2.4 GHz-bandwidth frequency such as an Internet router) turned on. If an unintended operation of the 3D function occurs, it is best to remove nearby electromagnetic devices or wireless communications devices.• The 3D glasses may malfunction if there is any electric field or metallic object such as a steel plate nearby. If an unintended operation of the 3D glasses occurs, it is best to keep the glasses as far away as possible from the metallic object.• The glasses may power off if you remain stationary while viewing 3D video for an extended period of time.• If the 3D glasses do not function immediately after you put them on when the TV is in 3D mode, take them off and then put them back on.CAUTIONIMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IMAGES. READ THE FOLLOWING CAUTIONS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.• function. If your child shows any symptom such as eye fatigue, headache, dizziness, or nausea, stop the child from watching 3D video immediately to rest.• Do not use the 3D glasses for other purposes such as general eyeglasses, sunglasses, protective goggles, etc.• While watching 3D content, you may experience eye strain, headache, dizziness and nausea. If eye fatigue occurs, stop viewing 3D video immediately, take off the 3D glasses, and rest.• Viewing 3D video for an extended period of time may cause eye fatigue. If eye fatigue occurs, stop viewing 3D video immediately, take off the 3D glasses, and rest.• Do not use the 3D function or 3D glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may result in injury from running into objects, tripping, and/or falling.• If you sleep with the 3D glasses on, the temples on the glasses may become broken.• Note that the temples on your 3D glasses are not foldable. Trying to fold the temples by force may damage the glasses.• Do not shake your 3D glasses repeatedly. Shaking the glasses will power them on and can cause the battery to discharge faster than it should.SAFETY PRECAUTIONSThe following safety instructions are to ensure your personal safety and prevent property damage. Please read the following to ensure the proper use of the product.• Do not place the product in a location exposed to direct sunlight, heat, fire or water. This may result in a product malfunction or fire.• Do not apply force to the lenses of the 3D glasses. Do not drop or bend the product. This may result in a product malfunction.[NA]SSG-3570CR-00L17.indb   3 2013-01-02    9:15:09
Download:
Mirror Download [FCC.gov]
Document ID1926288
Application IDgPagEHKSWv/JanNUOcr15A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize123.72kB (1546453 bits)
Date Submitted2013-03-27 00:00:00
Date Available2013-09-23 00:00:00
Creation Date2013-01-02 09:15:08
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2013-01-18 11:45:33
Document TitleUsers Manual
Document CreatorAdobe InDesign CS5 (7.0)
FCC ID Filing: A3LSSG3570CR

Navigation menu